|
ASTM 00.01 |
ANNUAL BOOK OF ASTM STANDARDS - SUBJECT INDEX; ALPHANUMERIC LIST |
|
ASTM D 1005 |
Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
|
ASTM D 1006 |
Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood |
|
ASTM D 1007 |
Standard Specification for sec-Butyl Alcohol |
|
ASTM D 1013 |
Standard Test Method for Determining Total Nitrogen in Resins and Plastics |
|
ASTM D 1014 |
Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates |
|
ASTM D 1065 |
Standard Test Method for Unsaponifible Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products |
|
ASTM D 1078 |
Standard Test Method for Distillation Range of Volatile Organic Liquids-IP Designation: 195/98 |
|
ASTM D 1133 |
Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents |
|
ASTM D 1135 |
Standard Test Methods for Chemical Analysis of Blue Pigments |
|
ASTM D 1152 |
Standard Specification for Methanol (Methyl Alcohol) |
|
ASTM D 1153 |
Standard Specification for Methyl Isobutyl Ketone |
|
ASTM D 1155 |
Standard Test Method for Roundness of Glass Spheres |
|
ASTM D 1186 |
Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base |
|
ASTM D 1198 |
Standard Test Method for Solvent Tolerance of Amine Resins |
|
ASTM D 1199 |
Standard Specification for Calcium Carbonate Pigments |
|
ASTM D 12 |
Standard Specification for Raw Tung Oil |
|
ASTM D 1200 |
Standard Test Method for Viscosity by Ford Viscosity Cup |
|
ASTM D 1208 |
Standard Test Methods for Common Properties of Certain Pigments |
|
ASTM D 1209 |
Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
|
ASTM D 1210 |
Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage |
|
ASTM D 1212 |
Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
|
ASTM D 1214 |
Standard Test Method for Sieve Analysis of Glass Spheres- Reinstated |
|
ASTM D 124 |
Standard Specification for Degummed Soybean Oil |
|
ASTM D 1240 |
Standard Test Methods for Rosin Acids Content of Navel Stores, Including Rosin, Tall Oil, and Related Products |
|
ASTM D 1257 |
Standard Specification for High-Gravity Glycerin |
|
ASTM D 1258 |
Standard Test Methods for High-Gravity Glycerin |
|
ASTM D 1259 |
Standard Test Methods for Nonvolatile Content of Resin Solutions |
|
ASTM D 126 |
Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green |
|
ASTM D 1296 |
Standard Test Method for Odor of Volatile Solvents and Diluents |
|
ASTM D 13 |
Standard Specification for Spirits of Turpentine |
|
ASTM D 1301 |
Standard Test Methods for Chemical Analysis of White Lead Pigments |
|
ASTM D 1308 |
Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes |
|
ASTM D 1309 |
Standard Test Method for Settling Properties of Traffic Paints During Storage |
|
ASTM D 1310 |
Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus |
|
ASTM D 1312 |
Standard Test Methods for Apparent Free Phenols in Synthetic Phenolic Resins or Solutions Used for Coating Purposes |
|
ASTM D 1316 |
Standard Test Method for Fineness of Grind of Printing Inks by the NPIRI Grindometer |
|
ASTM D 1343 |
Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method |
|
ASTM D 1348 |
Standard Test Methods for Moisture in Cellulose |
|
ASTM D 1353 |
Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products |
|
ASTM D 1360 |
Standard Test Method for Fire Retardancy of Paints (Cabinet Method) |
|
ASTM D 1363 |
Standard Test Method for Permanganate Time of Acetone and Methanol |
|
ASTM D 1364 |
Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method) |
|
ASTM D 1366 |
Standard Practice for Reporting Particle Size Characteristics of Pigments |
|
ASTM D 1392 |
Standard Specification for Safflower Oil |
|
ASTM D 1394 |
Standard Test Methods for Chemical Analysis of White Titanium Pigments |
|
ASTM D 1396 |
Standard Test Methods for Chemical Analysis of Poly(Vinyl Butyral) |
|
ASTM D 1397 |
Standard Test Method for Unsaponifiable Matter in Alkyd Resins and Resin Solutions |
|
ASTM D 1398 |
Standard Test Method for Fatty Acid Content of Alkyd Resins and Alkyd Resin Solutions |
|
ASTM D 1400 |
Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base |
|
ASTM D 1439 |
Standard Test Methods for Sodium Carboxymethylcellulose |
|
ASTM D 1462 |
Standard Specification for Refined Soybean Oil |
|
ASTM D 1474 |
Standard Test Methods for Indentation Hardness of Organic Coatings |
|
ASTM D 1475 |
Standard Test Method for Density of Liquid Coatings, Inks, and Related Products |
|
ASTM D 1476 |
Standard Test Method for Heptane Miscibility of Lacquer Solvents |
|
ASTM D 1483 |
Standard Test Method for Oil Absorption of Pigments by Gardner-Coleman Method |
|
ASTM D 1492 |
Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration |
|
ASTM D 153 |
Standard Test Methods for Specific Gravity of Pigments |
|
ASTM D 1537 |
Standard Specification for Distilled Soybean Fatty Acids |
|
ASTM D 1538 |
Standard Specification for Distilled Linseed Fatty Acids |
|
ASTM D 1539 |
Standard Specification for Dehydrated Castor Acids |
|
ASTM D 154 |
Standard Guide for Testing Varnishes |
|
ASTM D 1544 |
Standard Test Method for Color of Transparent Liquids (Gardner Color Scale) |
|
ASTM D 1545 |
Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method |
|
ASTM D 1546 |
Standard Practice For Testing the Performance of Clear Floor Sealers |
|
ASTM D 1555 REV A |
Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane |
|
ASTM D 1555M REV A |
Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
|
ASTM D 1585 |
Standard Test Methods for Fatty Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products |
|
ASTM D 16 |
Standard Terminology for Paint, Related Coatings, Materials, and Applications |
|
ASTM D 1612 |
Standard Test Method for Acetone in Methanol |
|
ASTM D 1613 |
Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
|
ASTM D 1614 |
Standard Test Method for Alkalinity in Acetone |
|
ASTM D 1617 |
Standard Test Method for Ester Value of Solvents and Thinners |
|
ASTM D 1631 |
Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method |
|
ASTM D 1640 |
Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature |
|
ASTM D 1641 |
Standard Practice for Conducting Outdoor Exposure Tests of Varnishes |
|
ASTM D 1644 |
Standard Test Methods for Nonvolatile Content of Varnishes- Reinstated |
|
ASTM D 1648 |
Standard Specification for Basic Lead Silicochromate Pigment |
|
ASTM D 1649 |
Standard Specification for Strontium Chromate Pigment |
|
ASTM D 1652 |
Standard Test Methods for Epoxy Content of Epoxy Resins |
|
ASTM D 1653 |
Standard Test Methods for Water Vapor Transmission of Organic Coating Films |
|
ASTM D 1654 |
Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments |
|
ASTM D 1685 |
Standard Test Method for Traces of Thiophene in Benzene by Spectrophotometry |
|
ASTM D 1686 |
Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale) |
|
ASTM D 1695 |
Standard Terminology of Cellulose and Cellulose Derivatives |
|
ASTM D 1696 |
Standard Test Method for Solubility of Cellulose in Sodium Hydroxide |
|
ASTM D 1718 |
Standard Specification for Isobutyl Acetate (95% Grade) |
|
ASTM D 1719 |
Standard Specification for Isobutyl Alcohol |
|
ASTM D 1720 |
Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions |
|
ASTM D 1721 |
Standard Test Method for Permanganate Time of Tricresyl Phosphate |
|
ASTM D 1722 |
Standard Test Method for Water Miscibility of Water-Soluble Solvents |
|
ASTM D 1725 |
Standard Test Method for Viscosity of Resin Solutions |
|
ASTM D 1726 |
Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins |
|
ASTM D 1734 |
Standard Practice for Making Cementitious Panels for Testing Coatings |
|
ASTM D 1735 |
Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
|
ASTM D 1795 |
Standard Test Method for Intrinsic Viscosity of Cellulose |
|
ASTM D 1836 |
Standard Specification for Commercial Hexanes |
|
ASTM D 1841 |
Standard Specification for Distilled Coconut Fatty Acids |
|
ASTM D 1842 |
Standard Specification for Distilled Corn Fatty Acids |
|
ASTM D 1843 |
Standard Specification for Fractionated and Distilled Cottonseed Fatty Acids |
|
ASTM D 1844 |
Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate |
|
ASTM D 1845 |
Standard Test Methods for Chemical Analysis of Strontium Chromate Pigment |
|
ASTM D 1847 |
Standard Test Methods for Total Chlorine Content of Epoxy Resins |
|
ASTM D 1849 |
Standard Test Method for Package Stability of Paint |
|
ASTM D 185 |
Standard Test Methods for Coarse Particles in Pigments, Pastes, and Paints |
|
ASTM D 1926 |
Standard Test Methods for Carboxyl Content of Cellulose |
|
ASTM D 1957 |
Standard Test Method for Hydroxyl Value of Fatty Oils and Acids |
|
ASTM D 1965 |
Standard Test Method for Unsaponifiable Matter in Drying Oils, Fatty Acids, and Polymerized Fatty Acids |
|
ASTM D 1966 |
Standard Test Method for Foots in Raw Linseed Oil (Gravimetric Method) |
|
ASTM D 1969 |
Standard Specification for 2-Ethylhexanol |
|
ASTM D 1978 |
Standard Guide for Analysis of Electrocoat Bath Samples |
|
ASTM D 1980 |
Standard Test Method for Acid Value of Fatty Acids and Polymerized Fatty Acids |
|
ASTM D 1981 |
Standard Test Method for Measuring Color After Heating of Tall Oil Fatty Acids |
|
ASTM D 1982 |
Standard Test Method for Titer of Fatty Acids |
|
ASTM D 2064 |
Standard Test Method for Print Resistance of Architectural Paints |
|
ASTM D 2065 |
Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress |
|
ASTM D 2066 |
Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions |
|
ASTM D 2067 |
Standard Test Method for Coarse Particles in Printing Ink Dispersions |
|
ASTM D 2071 |
Standard Test Methods for Fatty Nitrogen Products |
|
ASTM D 2072 |
Standard Test Method for Water in Fatty Nitrogen Compounds |
|
ASTM D 2073 |
Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines, Amidoamines, and Diamines by Referee Potentiometric Method |
|
ASTM D 2074 |
Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method |
|
ASTM D 2075 |
Standard Test Method for Iodine Value of Fatty Amines, Amidoamines, and Diamines |
|
ASTM D 2076 |
Standard Test Methods for Acid Value and Amine Value of Fatty Quaternary Ammonium Chlorides |
|
ASTM D 2077 |
Standard Test Method for Ash in Fatty Quaternary Ammonium Chlorides |
|
ASTM D 2079 |
Standard Test Method for Nonvolatile Matter (Solids) in Fatty Quaternary Ammonium Chlorides |
|
ASTM D 2080 |
Standard Test Method for Average Molecular Weight of Fatty Quaternary Ammonium Chlorides |
|
ASTM D 2081 |
Standard Test Method for pH of Fatty Quaternary Ammonium Chlorides |
|
ASTM D 2082 |
Standard Test Method for Percent of Non-Amines in Fatty Nitrogen Compounds |
|
ASTM D 2083 |
Standard Test Method for Calculation of Percent of Primary, Secondary, and Tertiary Amines in Fatty Amines |
|
ASTM D 2086 |
Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde |
|
ASTM D 2087 |
Standard Test Method for Iron in Formaldehyde Solutions |
|
ASTM D 209 |
Standard Specification for Lampblack Pigment |
|
ASTM D 2090 |
Standard Test Method for Clarity and Cleanness of Paint and Ink Liquids |
|
ASTM D 2091 |
Standard Test Method for Print Resistance of Lacquers |
|
ASTM D 2092 |
Standard Guide for Preparation of Zinc-Coated (Galvanized) Steel Surfaces for Painting |
|
ASTM D 210 |
Standard Specification for Bone Black Pigment |
|
ASTM D 211 |
Standard Specification for Chrome Yellow and Chrome Orange Pigments |
|
ASTM D 2119 |
Standard Test Method for Aldehydes in Styrene Monomer |
|
ASTM D 2121 |
Standard Test Methods for Polymer Content of Styrene Monomer and AMS (Alpha Particle-Methylstyrene) |
|
ASTM D 2134 |
Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker |
|
ASTM D 2190 |
Standard Specification for Vinyl Acetate |
|
ASTM D 2191 |
Standard Test Method for Acetaldehyde Content of Vinyl Acetate |
|
ASTM D 2192 |
Standard Test Method for Purity of Aldehydes and Ketones |
|
ASTM D 2193 |
Standard Test Method for Hydroquinone in Vinyl Acetate |
|
ASTM D 2194 |
Standard Test Method for Concentration of Formaldehyde Solutions |
|
ASTM D 2195 |
Standard Test Methods for Pentaerythritol |
|
ASTM D 2196 |
Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield Type) Viscometer |
|
ASTM D 2197 |
Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
|
ASTM D 2199 |
Standard Test Method for Measurement of Plasticizer Migration from Vinyl Fabrics to Lacquers |
|
ASTM D 2200 |
Standard Pictorial Surface Preparation Standards for Painting Steel Surfaces-SSPC-Vis 3; E1-2001 |
|
ASTM D 2201 |
Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products |
|
ASTM D 2205 |
Standard Guide for Selection of Tests for Traffic Paints |
|
ASTM D 2218 |
Standard Specification for Molybdate Orange Pigments |
|
ASTM D 2243 |
Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings |
|
ASTM D 2244 |
Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
|
ASTM D 2245 |
Standard Test Method for Identification of Oils and Oil Acids in Solvent- Reducible Paints |
|
ASTM D 2247 |
Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
|
ASTM D 2248 REV A |
Standard Practice for Detergent Resistance of Organic Finishes |
|
ASTM D 233 |
Standard Test Methods of Sampling and Testing Turpentine |
|
ASTM D 2336 |
Standard Guide for Specifying Factory Applied Wood Coatings |
|
ASTM D 2337 |
Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers |
|
ASTM D 2338 |
Standard Test Method for Determining Particle Size of Multicolor Lacquers |
|
ASTM D 234 |
Standard Specification for Raw Linseed Oil-Replaces ASTM D1 |
|
ASTM D 2340 |
Standard Test Method for Peroxides in Styrene Monomer |
|
ASTM D 2348 |
Standard Test Method for Arsenic in Paint |
|
ASTM D 2349 |
Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints |
|
ASTM D 235 |
Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) |
|
ASTM D 2350 |
Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints |
|
ASTM D 2351 |
Standard Test Method for Sulfide in White Pigment Separated from Solvent- Reducible Paints |
|
ASTM D 2352 |
Standard Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints |
|
ASTM D 2354 |
Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles |
|
ASTM D 2359 |
Standard Specification for Refined Benzene-535 |
|
ASTM D 2360 REV A |
Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography |
|
ASTM D 2363 |
Standard Test Methods for Hydroxypropyl Methylcellulose |
|
ASTM D 2364 |
Standard Test Methods for Hydroxyethylcellulose |
|
ASTM D 2369 |
Standard Test Method for Volatile Content of Coatings |
|
ASTM D 2370 |
Standard Test Method for Tensile Properties of Organic Coatings |
|
ASTM D 2371 |
Standard Test Method for Pigment Content of Solvent-Reducible Paints |
|
ASTM D 2372 |
Standard Practice for Separation of Vehicle from Solvent-Reducible Paints |
|
ASTM D 2373 |
Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method |
|
ASTM D 2374 |
Standard Test Method for Lead in Paint Driers by EDTA Method |
|
ASTM D 2375 |
Standard Test Method for Manganese in Paint Driers by EDTA Method |
|
ASTM D 2378 |
Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited |
|
ASTM D 2379 |
Standard Test Method for Acidity of Formaldehyde Solutions |
|
ASTM D 2380 |
Standard Test Method for Methanol Content of Formaldehyde Solutions |
|
ASTM D 2403 |
Standard Specification for Refined Phthalic Anhydride-1308 |
|
ASTM D 2439 |
Standard Specification for Refined Phenol |
|
ASTM D 2448 |
Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment |
|
ASTM D 2454 |
Standard Practice for Determining the Effect of Overbaking on Organic Coatings |
|
ASTM D 2485 |
Standard Test Methods for Evaluating Coatings for High Temperature Service |
|
ASTM D 2486 |
Standard Test Method for Scrub Resistance of Wall Paints |
|
ASTM D 2572 |
Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers |
|
ASTM D 2574 |
Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms |
|
ASTM D 2575 |
Standard Methods of Testing Polymerized Fatty Acids |
|
ASTM D 260 |
Standard Specification for Boiled Linseed Oil |
|
ASTM D 2613 |
Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method |
|
ASTM D 2621 |
Standard Test Method for Infrared Identification of Vehicle Solids from Solvent-Reducible Paints |
|
ASTM D 2627 |
Standard Specification for Diacetone Alcohol |
|
ASTM D 263 |
Standard Specification for Chrome Oxide Green Pigment |
|
ASTM D 2634 |
Standard Specification for Methyl Amyl Acetate (95% Grade) |
|
ASTM D 2635 |
Standard Specification for Methyl Isobutyl Carbinol |
|
ASTM D 2636 |
Standard Specification for Hexylene Glycol |
|
ASTM D 267 |
Standard Specification for Gold Bronze Powder |
|
ASTM D 268 |
Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material |
|
ASTM D 2689 |
Standard Practices for Testing Alkyd Resins |
|
ASTM D 269 |
Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives |
|
ASTM D 2690 |
Standard Test Method for Isophthalic Acid in Alkyd and Polyester Resins |
|
ASTM D 2693 |
Standard Specification for Ethylene Glycol |
|
ASTM D 2694 |
Standard Specification for Diethylene Glycol |
|
ASTM D 2697 |
Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
|
ASTM D 2698 |
Standard Test Method for Determination of the Pigment Content of Solvent- Reducible Paints by High-Speed Centrifuging |
|
ASTM D 2743 |
Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography |
|
ASTM D 2745 |
Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements |
|
ASTM D 279 |
Standard Test Methods for Bleeding of Pigments |
|
ASTM D 2792 |
Standard Test Method for Solvent and Fuel Resistance of Traffic Paint |
|
ASTM D 2793 |
Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates |
|
ASTM D 2794 |
Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
|
ASTM D 280 |
Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile under the Test Conditions) in Pigments |
|
ASTM D 2800 |
Standard Test Method for Preparation of Methyl Esters from Oils for Determination of Fatty Acid Composition by Gas-Liquid Chromatography |
|
ASTM D 2803 |
Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal-(Reinstate) |
|
ASTM D 2804 |
Standard Test Method for Purity of Methyl Ethyl Ketone by Gas Chromatography |
|
ASTM D 2805 REV A |
Standard Test Method for Hiding Power of Paints by Reflectometry |
|
ASTM D 281 |
Standard Test Method for Oil Absorption of Pigments by Spatula Rub- Out |
|
ASTM D 2827 |
Standard Specification for Styrene Monomer |
|
ASTM D 283 |
Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments |
|
ASTM D 2832 |
Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings |
|
ASTM D 2916 |
Standard Specification for Isophorone |
|
ASTM D 2917 |
Standard Specification for Methyl Isoamyl Ketone |
|
ASTM D 2921 |
Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products |
|
ASTM D 2929 |
Standard Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescense |
|
ASTM D 2930 |
Standard Test Method for Maleic Acid in Maleic Anhydride by Potentiometric Titration |
|
ASTM D 2967 REV A |
Standard Test Method for Corner Coverage of Powder Coatings |
|
ASTM D 3002 |
Standard Guide for Evaluation of Coatings Applied to Plastics |
|
ASTM D 3003 |
Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates |
|
ASTM D 301 |
Standard Test Methods for Soluble Cellulose Nitrate |
|
ASTM D 3021 |
Standard Specification for Phthalocyanine Green Pigments |
|
ASTM D 3022 |
Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill |
|
ASTM D 3023 |
Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents |
|
ASTM D 304 |
Standard Specification for n-Butyl Alcohol (Butanol) |
|
ASTM D 305 |
Standard Test Method for Solvent-Extractable Material in Black Pigments |
|
ASTM D 3054 |
Standard Test Methods for Analysis of Cyclohexane by Gas Chromatography |
|
ASTM D 3125 |
Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid |
|
ASTM D 3128 |
Standard Specification for 2-Methoxyethanol |
|
ASTM D 3130 |
Standard Specification for n-Propyl Acetate (96 % Grade) |
|
ASTM D 3131 |
Standard Specification for Isopropyl Acetate (99% Grade) |
|
ASTM D 3133 |
Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry |
|
ASTM D 3160 |
Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (a Methylstyrene) |
|
ASTM D 3168 |
Standard Practice for Qualitative Identification of Polymers in Emulsion Paints |
|
ASTM D 3169 |
Standard Specification for Refined Sunflower Oil |
|
ASTM D 3170 |
Standard Test Method for Chipping Resistance of Coatings |
|
ASTM D 319 |
Standard Specification for Amyl Alcohol (Synthetic) |
|
ASTM D 3193 |
Standard Specification for Ethylbenzene |
|
ASTM D 3256 |
Standard Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments |
|
ASTM D 3257 |
Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography |
|
ASTM D 3258 |
Standard Test Method for Porosity of White or Near White Paint Films by Staining |
|
ASTM D 3259 |
Standard Practice for Infrared Determination of the Temperature of Applied Coatings on Wood Products During the Curing Cycle |
|
ASTM D 3260 |
Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products |
|
ASTM D 3271 |
Standard Practice for Direct Injection of Solvent-Reducible Paints into a Gas Chromatograph for Solvent Analysis |
|
ASTM D 3272 |
Standard Practice for Vacuum Distillation of Solvents from Solvent- Reducible Paints for Analysis |
|
ASTM D 3274 |
Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation |
|
ASTM D 3278 |
Standard Test Methods for Flash Point of Liquids by Small Scale Closed- Cup Apparatus |
|
ASTM D 3280 |
Standard Test Methods for Analysis of White Zinc Pigments |
|
ASTM D 329 |
Standard Specification for Acetone |
|
ASTM D 330 |
Standard Specification for 2-Butoxyethanol |
|
ASTM D 331 |
Standard Specification for 2-Ethoxyethanol |
|
ASTM D 332 |
Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation |
|
ASTM D 3322 |
Standard Practice for Testing Primers and Primer Surfacers over Preformed Metal |
|
ASTM D 3329 |
Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography |
|
ASTM D 333 |
Standard Guide for Clear and Pigmented Lacquers |
|
ASTM D 3335 REV A |
Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy |
|
ASTM D 3359 |
Standard Test Methods for Measuring Adhesion by Tape Test |
|
ASTM D 3361 |
Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
|
ASTM D 3362 |
Standard Test Method for Purity of Acrylate Esters by Gas Chromatography |
|
ASTM D 3363 |
Standard Test Method for Film Hardness by Pencil Test |
|
ASTM D 3366 |
Standard Test Method for Color of Maleic Anhydride and Phthalic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) |
|
ASTM D 34 |
Standard Guide for Chemical Analysis of White Pigments |
|
ASTM D 3424 |
Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter |
|
ASTM D 3437 |
Standard Practice for Sampling and Handling Liquid Cyclic Products |
|
ASTM D 3438 |
Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride |
|
ASTM D 344 |
Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts |
|
ASTM D 3450 |
Standard Test Method for Washability Properties of Interior Architectural Coatings |
|
ASTM D 3451 |
Standard Guide for Testing Coating Powders and Powder Coatings |
|
ASTM D 3456 |
Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack |
|
ASTM D 3459 |
Standard Test Method for Humid-Dry Cycling for Coatings on Wood and Wood Products |
|
ASTM D 3504 |
Standard Specification for Maleic Anhydride |
|
ASTM D 3505 |
Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
|
ASTM D 3516 |
Standard Test Methods for Ashing Cellulose |
|
ASTM D 3539 |
Standard Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer |
|
ASTM D 3540 |
Standard Specification for Primary Amyl Acetate, Synthetic (98% Grade) |
|
ASTM D 3541 |
Standard Specification for 2-Ethylhexyl Acrylate |
|
ASTM D 3545 |
Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography |
|
ASTM D 3546 |
Standard Test Method for Formic Acid in Glacial Acetic Acid |
|
ASTM D 3547 |
Standard Specification for n-Butyl Acrylate |
|
ASTM D 3548 |
Standard Specification for Ethyl Acrylate |
|
ASTM D 358 |
Standard Specification for Wood to Be Used as Panels in Weathering Tests of Coatings |
|
ASTM D 360 |
Standard Specification for Shellac Varnishes |
|
ASTM D 3618 |
Standard Test Method for Detection of Lead in Paint and Dried Paint Films |
|
ASTM D 3620 |
Standard Specification for Glacial Acetic Acid |
|
ASTM D 3622 |
Standard Specification for 1-Propanol (n-Propyl Alcohol) |