|
API H00005 |
Manual of Petroleum Measurement Standards - Draft Standard - Sediment and Water - Continuous On-Line Measurement of Water Content in Petroleum and Petroleum Products-First Edition |
|
API H00008 |
Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology-First Edition |
|
API MPMS 1 |
Manual of Petroleum Measurement Standards Chapter 1 - Vocabulary |
|
API MPMS 10.5 |
Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 5 - Standard Test Method of Water in Petroleum Products and Bituminous Materials by Distillation-Fourth Edition |
|
API MPMS 10.6 |
Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 6 - Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)-Fourth Edition |
|
API MPMS 11.1 |
Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils-VCF Software; Software Application - To Purchase the Software Application call 1-800-854-7179 |
|
API MPMS 11.2 |
Manual of Petroleum Measurement Standards Chapter 11.2.1 and 11.2.1M - Compressibility Factors for Hydrocarbons: 0-90 Degrees API Gravity and 638-1074 Kilograms per Cubic Metre Ranges Chapter 11.2.3 and 11.2.3M - Water Calibration of Provers Computer Tape |
|
API MPMS 11.2.2 |
Manual of Petroleum Measurement Standards Chapter 11.2.2 - Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 Degrees F/ 60 Degrees F) and -50 Degrees F to 140 Degrees F Metering Temperature-Second Edition; GPA 8286-86; Errata:June |
|
API MPMS 11.2.2 ADDENDUM |
Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Addendum to Section 2, Part 2 - Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids-First Edition; Errata 1996 |
|
API MPMS 11.2.2M |
Manual of Petroleum Measurement Standards Chapter 11.2.2M - Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Metre Density (15 Degrees C) and -46 Degrees C to 60 Degrees C Metering Temperature |
|
API MPMS 11.3.2.1 |
Manual of Petroleum Measurement Standards Chapter 11.3.2.1 - Ethylene Density Measurement Manual-Disk Available |
|
API MPMS 11.3.3.2 |
Manual of Petroleum Measurement Standards Chapter 11.3.3.2 - Propylene Compressibility Tables-Disk Available |
|
API MPMS 12.1.1 |
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 1 - Upright Cylindrical Tanks and Marine Vessels-Second Edition |
|
API MPMS 12.1.2 |
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 2 - Calculation Procedures for Tank Cars-First Edition |
|
API MPMS 12.2 |
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters-First Edition |
|
API MPMS 12.2.1 |
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 1 - Introduction- Second Edition |
|
API MPMS 12.2.2 |
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 2 - Measurement Tickets-Third Edition |
|
API MPMS 12.2.3 |
Calculation of Petroleum Quantities - Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors - Part 3 - Proving Reports-First Edition |
|
API MPMS 12.2.4 |
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by t |
|
API MPMS 14.3.1 |
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 1 - General Equations and Uncertainty Guidelines-Third Edition; Errata - 1991; Errata - 1993; Replaces API MPMS |
|
API MPMS 14.3.3 |
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 3 - Natural Gas Applications |
|
API MPMS 14.4 |
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 4 - Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes-First Edition |
|
API MPMS 14.8 |
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 8 - Liquefied Petroleum Gas Measurement-Second Edition |
|
API MPMS 16.2 |
Manual of Petroleum Measurement Standards Chapter 16 - Measurement of Hydrocarbon Fluids by Weight or Mass Section 2 - Mass Measurement of Liquid Hydrocarbons in Vertical Cylindrical Storage Tanks by Hydrostatic Tank Gauging-First Edition |
|
API MPMS 17.1 |
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 1 - Guidelines for Marine Cargo Inspection-Fourth Edition; Errata: June 2005 |
|
API MPMS 17.2 |
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 2 - Measurement of Cargoes on Board Tank Vessels-Second Edition; Errata: April 28, 2000 |
|
API MPMS 17.3 |
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 3 - Guidelines for Identification of the Source of Free Waters Associated with Marine Petroleum Cargo Movements-First Edition; Errata - 1992 |
|
API MPMS 17.4 |
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 4 - Method for Quantification of Small Volumes on Marine Vessels (OBQ/ROB) |
|
API MPMS 17.5 |
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 5 - Guidelines for Cargo Analysis and Reconciliation of Cargo Quantities-Second Edition |
|
API MPMS 17.6 |
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 6 - Guidelines for Determining the Fullness of Pipelines between Vessels and Shore Tanks-First Edition |
|
API MPMS 17.7 |
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 7 - Recommended Practices for Developing Barge Control Factors (Volume Ratio) |
|
API MPMS 17.8 |
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 8 - Guidelines for Pre-Loading Inspection of Marine Vessel Cargo Tanks-First Edition |
|
API MPMS 17.9 |
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 9Vessel Experience Factor (VEF) IP Hydrocarbon Management HM 49- First Edition |
|
API MPMS 19.1 |
Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 1 - Evaporative Loss from Fixed-Roof Tanks-Third Edition |
|
API MPMS 19.1D |
Documentation File for API Manual of Petroleum Measurement Standards Chapter 19.1 - Evaporative Loss from Fixed Roof Tanks-First Edition; Erratum - 1994; API Bulletin 2518 |
|
API MPMS 19.2 |
Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 2 - Evaporative Loss from Floating-Roof Tanks- Second Edition; Formerly, API Publications 2517 and 2519 |
|
API MPMS 19.3 PART A |
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part A - Wind Tunnel Test Method for the Measurement of Deck-Fitting Loss Factors for External Floating-Roof Tanks-First Edition |
|
API MPMS 19.3 PART B |
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part B - Air Concentration Test Method - Rim-Seal Loss Factors for Floating-Roof Tanks-First Edition |
|
API MPMS 19.3 PART C |
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part C - Weight Loss Test Method for the Measurement of Rim-Seal Loss Factors for Internal Floating-Roof Tanks-First Edition |
|
API MPMS 19.3 PART D |
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part D - Fugitive Emission Test Method for the Measurement of Deck- Seam Loss Factors for Internal Floating-Roof Tanks-First Edition |
|
API MPMS 19.3 PART E |
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part E - Weight Loss Test Method for the Measurement of Deck-Fitting Loss Factors for Internal Floating-Roof Tanks-First Edition |
|
API MPMS 19.3 PART F |
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part F - Evaporative Loss Factor for Storage Tanks Certification Program- First Edition |
|
API MPMS 19.3 PART G |
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part G - Certified Loss Factor Testing Laboratory Registration-First Edition |
|
API MPMS 19.3 PART H |
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part H - Tank Seals and Fittings Certification - Administration-First Edition |
|
API MPMS 19.4 |
Manual of Petroleum Measurement Standards Chapter 19.4 - Recommended Practice for Speciation of Evaporative Losses-Second Edition |
|
API MPMS 2.2A |
Manual of Petroleum Measurement Standard Chapter 2 - Tank Calibration Section 2A - Measurement and Calibration of Upright Cylindrical Tanks by the Manual Tank Strapping Method-First Edition |
|
API MPMS 2.2B |
Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2B - Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method-First Edition |
|
API MPMS 2.2C |
Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2C - Calibration of Upright Cylindrical Tanks Using the Optical- Triangulation Method-First Edition/ ISO 7507-3 Adoption |
|
API MPMS 2.2D |
Manual of Petroleum Measurement Standards Chapter 2 Tank Calibration Section 2D Calibration of Upright Cylindrical Tanks Using the Internal Electrooptical Distance Ranging Method-First Edition/ISO 7507-4 Adoption |
|
API MPMS 2.2E |
Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods-First Edition; ISO 12917-1 Adoption |
|
API MPMS 2.2F |
Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 2: Internal Electro-Optical Distance-Ranging Method-First Edition; ISO 12917-2 Adoption |
|
API MPMS 2.7 |
Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 7 - Calibration of Barge Tanks-First Edition |
|
API MPMS 2.8A |
Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 8A - Calibration of Tanks on Ships and Oceangoing Barges-First Edition |
|
API MPMS 21.1 |
Manual of Petroleum Measurement Standards Chapter 21 - Flow Measurement Using Electronic Metering Systems Section 1 - Electronic Gas Measurement |
|
API MPMS 22.2 |
Manual of Petroleum Measurement Standards Chapter 22Testing Protocol Section 2Differential Pressure Flow Measurement Devices-First Edition; Replaces MPMS 5.7:2003 |
|
API MPMS 3.1A |
Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products-Second Edition |
|
API MPMS 3.1B |
Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1B - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging-Second Edition |
|
API MPMS 4.1 |
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 1 - Introduction-Third Edition |
|
API MPMS 4.4 |
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 4 - Tank Provers-Second Edition |
|
API MPMS 4.9.1 |
Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers-First Edition |
|
API MPMS 4.9.2 |
Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and Volumetric Tank Provers Part 2Determination of the Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration-First |
|
API MPMS 5.1 |
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 1 - General Considerations for Measurement by Meters-Fourth Edition |
|
API MPMS 5.3 |
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters-Fifth Edition |
|
API MPMS 5.4 |
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 4 - Accessory Equipment for Liquid Meters-Fourth Edition |
|
API MPMS 5.5 |
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 5 - Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems- Second Edition |
|
API MPMS 5.6 |
Metering, Section 6 - Measurment of Liquid Hydrocarbons by Coriolis Meters-First Edition; Replaces API H00004 and API H00006 |
|
API MPMS 5.8 |
Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 8 - Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology-First Edition |
|
API MPMS 6.2 |
Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 2 - Loading-Rack Metering Systems-Third Edition |
|
API MPMS 6.4 |
Manual of Petroleum Measurement Standards Chapter 6 - Metering Section 4 - Metering Systems for Aviation Fueling Facilities-First Edition |
|
API MPMS 6.5 |
Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 5 - Metering Systems for Loading and Unloading Marine Bulk Carriers- Second Edition |
|
API MPMS 8.2 |
Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 2 - Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products-Second Edition; ASTM D4177 |
|
API MPMS 8.3 |
Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products-First Edition; ASTM D5854 |
|
API MPMS 8.4 |
Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement- Second Edition |
|
API MPMS 9.1 |
Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method-Second Edit |
|
API MPMS 9.2 |
Manual of Petroleum Measurement Standards Chapter 9 - Determination Section 2 - Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer-Second Edition |
|
API MPMS 9.3 |
Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 3 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method-Second Edition |
|
API PUBL 1835 |
Study of Used Motor Oil Recycling in Eleven Selected Countries |
|
API PUBL 2558 |
Wind Tunnel Testing of External Floating-Roof Storage Tanks |
|
API STD 2554 |
Measurement and Calibration of Tank Cars-ASTM D1409 |