| Document Number |
Title |
| A13.1 |
Scheme for the Identification of Piping Systems |
| AS-11 |
Personnel of Codes, Standards, and Related Conformity Assessment Committees |
| B1.1 |
Unified Inch Screw Threads (UN and UNR Thread Form) |
| B1.2 |
Gages and Gaging for Unified Inch Screw Threads |
| B1.3M |
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)-Errata - 1994 |
| B1.5 |
Acme Screw Threads |
| B1.7M |
Nomenclature, Definitions, and Letter Symbols for Screw Threads |
| B1.8 |
Stub Acme Screw Threads |
| B1.9 |
Buttress Inch Screw Threads 7 Degrees/45 Degrees Form with 0.6 Pitch Basic Height of Thread Engagement |
| B1.10M |
Unified Miniature Screw Threads |
| B1.11 |
Microscope Objective Thread |
| B1.12 |
Class 5 Interference-Fit Thread |
| B1.13M |
Metric Screw Threads: M Profile |
| B1.15 |
Unified Inch Screw Threads (UNJ Thread Form) |
| B1.16M |
Gages and Gaging for Metric M Screw Threads |
| B1.20.1 |
Pipe Threads, General Purpose (Inch) |
| B1.20.3 |
Dryseal Pipe Threads (Inch) |
| B1.20.5 |
Gaging for Dryseal Pipe Threads (Inch) |
| B1.20.7 |
Hose Coupling Screw Threads (Inch) |
| B1.21M |
Metric Screw Threads: MJ Profile |
| B1.22M |
Gages and Gaging for MJ Series Metric Screw Threads |
| B1.30 |
Screw Threads: Standard Practice for Calculating and Rounding Dimensions |
| B4.1 |
Preferred Limits and Fits for Cylindrical Parts |
| B4.2 |
Preferred Metric Limits and Fits |
| B5.10 |
Machine Tapers |
| B16.1 |
Cast Iron Pipe Flanges and Flanged Fittings Classes 25, 125, and 250 |
| B16.3 |
Malleable Iron Threaded Fittings Classes 150 and 300 |
| B16.4 |
Gray Iron Threaded Fittings - Classes 125 and 250 |
| B16.4 INTERPRETATIONS |
Interpretations to B16.4-1998 - Gray Iron Threaded Fittings - Classes 125 and 250 |
| B16.5 |
Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 Metric/Inch Standard |
| B16.5 INTERPRETATIONS |
Interpretations to B16.5-1996 Pipe Flanges and Flanged Fittings |
| B16.9 |
Factory-Made Wrought Buttwelding Fittings |
| B16.9 INTERPRETATIONS |
Interpretations to B16.9-1993 Factory-Made Wrought Steel Buttwelding Fittings |
| B16.10 |
Face-to-Face and End-to-End Dimensions of Valves |
| B16.10 INTERPRETATIONS |
Interpretations to B16.10-1992 Face-to-Face and End-to-End Dimensions of Valves |
| B16.11 |
Forged Fittings, Socket-Welding and Threaded |
| B16.12 |
Cast Iron Threaded Drainage Fittings |
| B16.14 |
Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads |
| B16.15 |
Cast Bronze Threaded Fittings Classes 125 and 250 |
| B16.15 INTERPRETATIONS |
Interpretations to B16.5-1985 Cast Bronze Threaded Fittings Classes 125 and 250 |
| B16.18 |
Cast Copper Alloy Solder Joint Pressure Fittings |
| B16.20 |
Metallic Gaskets for Pipe Flanges Ring-Joint, Spiral-Wound, and Jacketed |
| B16.21 |
Nonmetallic Flat Gaskets for Pipe Flanges |
| B16.22 |
Wrought Copper and Copper Alloy Solder Joint Pressure Fittings |
| B16.23 |
Cast Copper Alloy Solder Joint Drainage Fittings: DWV |
| B16.24 |
Cast Copper Alloy Pipe Flanges and Flanged Fittings: Class 150, 300, 400, 600, 900, 1500, and 2500 |
| B16.25 |
Buttwelding Ends |
| B16.25 INTERPRETATIONS |
Interpretations to B16.25-1997 Buttwelding Ends |
| B16.26 |
Cast Copper Alloy Fittings for Flared Copper Tubes |
| B16.28 |
Wrought Steel Buttwelding Short Radius Elbows and Returns |
| B16.28 INTERPRETATIONS |
Interpretations to B16.28-1994 Wrought Steel Buttwelding Short Radius Elbows and Returns |
| B16.29 |
Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings - DWV |
| B16.33 |
Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 PSI (Sizes NPS 1/2 Through NPS 2) |
| B16.34 |
Valves - Flanged, Threaded, and Welding End |
| B16.34 INTERPRETATIONS |
Interpretations to B16.34-1996 Valves - Flanged, Threaded, and Welding End |
| B16.36 |
Orifice Flanges |
| B16.36 INTERPRETATIONS |
Interpretations to B16.36-1996 Orifice Flanges |
| B16.38 |
Large Metallic Valves for Gas Distribution (Manually Operated, NPS 2 1/2 to 12, 125 psig Maximum) |
| B16.39 |
Malleable Iron Threaded Pipe Unions Classes 150, 250, and 300 |
| B16.40 |
Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems |
| B16.42 |
Ductile Iron Pipe Flanges and Flanged Fittings Classes 150 and 300 |
| B16.45 |
Cast Iron Fittings for Sovent Drainage Systems |
| B16.47 |
Large Diameter Steel Flanges NPS 26 Through NPS 60 |
| B16.47 INTERPRETATIONS |
Interpretations to B16.47-1996 Large Diameter Steel Flanges NPS 26 Through NPS 60 |
| B18.1.1 |
Small Solid Rivets 7/16 Inch Nominal Diameter and Smaller |
| B18.1.2 |
Large Rivets 1/2 Inch Nominal Diameter and Larger |
| B18.1.3M |
Metric Small Solid Rivets 12 mm Nominal Diameter and Smaller |
| B18.2.1 |
Square and Hex Bolts and Screws (Inch Series) |
| B18.2.2 |
Square and Hex Nuts (Inch Series) |
| B18.2.3.1M |
Metric Hex Cap Screws |
| B18.2.3.2M |
Metric Formed Hex Screws |
| B18.2.3.3M |
Metric Heavy Hex Screws |
| B18.2.3.4M |
Metric Hex Flange Screws |
| B18.2.3.5M |
Metric Hex Bolts |
| B18.2.3.6M |
Metric Heavy Hex Bolts |
| B18.2.3.7M |
Metric Heavy Hex Structural Bolts |
| B18.2.3.8M |
Metric Hex Lag Screws |
| B18.2.3.9M |
Metric Heavy Hex Flange Screws |
| B18.2.4.1M |
Metric Hex Nuts, Style 1 |
| B18.2.4.2M |
Metric Hex Nuts, Style 2 |
| B18.2.4.3M |
Metric Slotted Hex Nuts |
| B18.2.4.4M |
Metric Hex Flange Nuts |
| B18.2.4.5M |
Metric Hex Jam Nuts |
| B18.2.4.6M |
Metric Heavy Hex Nuts |
| B18.2.6 |
Fasteners for Use in Structural Applications |
| B18.3 |
Socket Cap, Shoulder, and Set Screws, Hex and Spline Keys (Inch Series) |
| B18.3.1M |
Socket Head Cap Screws (Metric Series) |
| B18.3.2M |
Metric Series Hexagon Keys and Bits |
| B18.3.3M |
Hexagon Socket Head Shoulder Screws (Metric Series) |
| B18.3.4M |
Hexagon Socket Button Head Cap Screws (Metric Series) |
| B18.3.5M |
Hexagon Socket Flat Countersunk Head Cap Screws (Metric Series) |
| B18.3.6M |
Metric Series Socket Set Screws |
| B18.5 |
Round Head Bolts (Inch Series) |
| B18.5.2.1M |
Metric Round Head Short Square Neck Bolts |
| B18.5.2.2M |
Metric Round Head Square Neck Bolts |
| B18.5.2.3M |
Round Head Square Neck Bolts with Large Head (Metric Series) |
| B18.6.1 |
Wood Screws (Inch Series) |
| B18.6.2 |
Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws (Inch Series) |
| B18.6.3 |
Machine Screws and Machine Screw Nuts |
| B18.6.4 |
Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws (Inch Series) |
| B18.6.5M |
Metric Thread-Forming and Thread-Cutting Tapping Screws |
| B18.6.7M |
Metric Machine Screws |
| B18.7.1M |
Metric General Purpose Semi-Tubular Rivets |
| B18.8.1 |
Clevis Pins and Cotter Pins (Inch Series) |
| B18.8.2 |
Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins (Inch Series) |
| B18.9 |
Plow Bolts (Inch Series) |
| B18.10 |
Track Bolts and Nuts |
| B18.11 |
Miniature Screws |
| B18.12 |
Glossary of Terms for Mechanical Fasteners |
| B18.13 |
Screw and Washer Assemblies - Sems (Inch Series) |
| B18.13.1M |
Screw and Washer Assemblies - Sems (Metric Series) |
| B18.15 |
Forged Eyebolts |
| B18.18.1M |
Inspection and Quality Assurance for General Purpose Fasteners |
| B18.18.2M |
Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners |
| B18.18.2M SUPPLEMENT |
Supplement of ASME B18.18.2m-1987 Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners |
| B18.18.3M |
Inspection and Quality Assurance for Special Purpose Fasteners |
| B18.18.4M |
Inspection and Quality Assurance for Fasteners for Highly Specialized Engineered Applications |
| B18.21.1 |
Lock Washers (Inch Series) |
| B18.22.1 |
Plain Washers |
| B18.22M |
Metric Plain Washers |
| B18.24 |
Part Identifying Number (PIN) Code System Standard for B18 Fastener Products |
| B18.25.1M |
Square and Rectangular Keys and Keyways |
| B18.25.2M |
Woodruff Keys and Keyways |
| B18.29.1 |
Helical Coil Screw Thread Inserts - Free Running and Screw Locking (Inch Series) |
| B18.30.1M |
Open-End Blind Rivets with Break Mandrels (Metric Series) |
| B20.1 |
Safety Standard for Conveyors and Related Equipment |
| B31.1 |
Power Piping |
| B31.1 CASES NO. 25 |
Cases No. 25 to B31.1 Power Piping |
| B31.1 CASES NO. 26 |
Cases No. 26 to B31.1 Power Piping |
| B31.1 INTERPRETATIONS |
Interpretations to B31.1-1998 Power Piping |
| B31.2 |
Fuel Gas Piping |
| B31.3 |
Process Piping |
| B31.3 INTERPRETATIONS |
Interpretations to B31.3-1999 Process Piping |
| B31.4 |
Pipeline Transportation Systems for Liquid Hydrocarbons and other Liquids |
| B31.4 INTERPRETATIONS |
Intrepretations to B31.4-1998 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids |
| B31.5 |
Refrigeration Piping and Heat Transfer Components |
| B31.5 INTERPRETATIONS |
Interpretations to B31.5-1992 Refrigreration Piping |
| B31.8 |
Gas Transmission and Distribution Piping Systems |
| B31.8 INT NO.11 |
Interpretations NO.11 to B31.8 Gas Transmission and Distribution Piping Systems |
| B31.8S |
Managing System Integrity of Gas Pipelines-Supplement to ASME B31.8 |
| B31.9 |
Building Services Piping |
| B31.9 INTERPRETATIONS |
Interpretations to B31.9-1996 Building Services Piping |
| B31.11 |
Slurry Transportation Piping Systems |
| B31.11 INTERPRETATIONS |
Interpretations to B31.11-1989 Slurry Transportation Piping Systems |
| B31G |
Manual for Determining the Remaining Strength of Corroded Pipelines a Supplement to ASME B31 Code for Pressure Piping |
| B32.3M |
Preferred Metric Sizes for Flat Metal Products |
| B32.4M |
Preferred Metric Sizes for Round, Square, Rectangle and Hexagon Metal Products |
| B32.5 |
Preferred Metric Sizes for Tubular Metal Products Other Than Pipe |
| B32.100 |
Preferred Metric Sizes for Flat, Round, Square, Rectangular, and Hexagonal Metal Products |
| B36.10M |
Welded and Seamless Wrought Steel Pipe |
| B36.19M |
Stainless Steel Pipe |
| B46.1 |
Surface Texture (Surface Roughness, Waviness, and Lay) |
| B47.1 |
Gage Blanks |
| B89.1.6 |
Measurement of Plain Internal Diameters for Use as Master Rings and Ring Gages |
| B89.1.9 |
Gage Blocks |
| B89.4.1 |
Methods for Performance Evaluation of Coordinate Measuring Machines |
| B89.6.2 |
Temperature and Humidity Environment for Dimensional Measurement |
| B94.6 |
Knurling |
| B94.11M |
Twist Drills |
| BPE |
Bioprocessing Equipment |
| CSD-1 |
Controls and Safety Devices for Automatically Fired Boilers |
| CSD-1 INTERPRETATIONS |
Interpretations to CSD-1 Controls and Safety Devices for Automatically Fired Boilers |
| GUIDE 2001 |
Guide for ASME Stamp Holders |
| HPS |
High Pressure Systems |
| MFC-2M |
Measurement Uncertainty for Fluid Flow in Closed Conduits |
| N278.1 |
Self-Operated and Power-Operated Safety-Related Valves Functional Specification Standard, Reactor Plants and Their Maintenance |
| NQA-1 |
Quality Assurance Requirements for Nuclear Facility Applications |
| NQA-1 INTERPRETATIONS |
Interpretations to NQA-1-2000 Edition Quality Assurance Requirements for Nuclear Facility Applications |
| OM CODE |
Code for Operation and Maintenance of Nuclear Power Plants |
| OM CODE CASES |
Code Cases to OM CODE Code for Operation and Maintenance of Nuclear Power Plants |
| OM CODE INTERPRETATIO |
Interpretations to OM CODE-1998 Code for Operation and Maintenance of Nuclear Power Plants |
| OM-S/G |
Standards and Guides for Operation and Maintenance of Nuclear Power Plants |
| PALD |
Safety Standard for Portable Automotive Lifting Devices |
| PALD INTERPRETATIONS |
Interpretations to PALD-1997 Safety Standard for Portable Automotive Lifting Devices |
| PCC-1 |
Guidelines for Pressure Boundary Bolted Flange Joint Assembly |
| PTC 1 |
General Instructions Performance Test Codes |
| PTC 2 |
Definitions and Values Performance Test Codes |
| PTC 4 |
Fire Steam Generators |
| PTC 4.2 |
Coal Pulverizers |
| PTC 4.3 |
Air Heaters |
| PTC 4.4 |
Gas Turbine Heat Recovery Steam Generators |
| PTC 6 |
Steam Turbines |
| PTC 6 REPORT |
Guidance for Evaluation of Measurement Uncertainty in Performance Tests of Steam Turbines |
| PTC 6A |
Appendix A To PTC 6, the Test Code for Steam Turbines |
| PTC 6S REPORT |
Procedures for Routine Performance Tests of Steam Turbines |
| PTC 10 |
Performance Test Code on Compressors and Exhausters |
| PTC 11 |
Fans |
| PTC 12.1 |
Closed Feedwater Heaters |
| PTC 12.2 |
Performance Test Code on Steam Surface Condensers |
| PTC 12.3 |
Performance Test Code on Deaerators |
| PTC 12.4 |
Moisture Separator Reheaters |
| PTC 17 |
Reciprocating Internal-Combustion Engines |
| PTC 18 |
Hydraulic Turbines and Pump-Turbines |
| PTC 19.1 |
Test Uncertainty Instruments and Apparatus |
| PTC 19.2 |
Part 2: Pressure Measurement Instruments and Apparatus |
| PTC 19.3 |
Part 3: Temperature Measurement Instruments and Apparatus |
| PTC 19.7 |
Part 7: Measurement of Shaft Power Instruments and Apparatus |
| PTC 19.10 |
Part 10: Flue and Exhaust Gas Analyses Instruments and Apparatus |
| PTC 19.11 |
Steam and Water Sampling, Conditioning, and Analysis in the Power Cycle |
| PTC 19.22 |
Part 22: Digital Systems Techniques Instruments and Apparatus |
| PTC 19.23 |
Part 23: Guidance Manual for Model Testing Instruments and Apparatus |
| PTC 23 |
Atmospheric Water Cooling Equipment |
| PTC 24 |
Ejectors |
| PTC 25 |
Pressure Relief Devices |
| PTC 25 SPECIAL ADDENDA |
Special Addenda to PTC 25-1994 Pressure Relief Devices |
| PTC 29 |
Speed-Governing Systems for Hydraulic Turbine-Generator Units |
| PTC 31 |
Ion Exchange Equipment |
| PTC 36 |
Measurement of Industrial Sound |
| PTC 38 |
Determining the Concentration of Particulate Matter in a Gas Stream |
| PTC 39 |
Steam Traps |
| PTC 40 |
Flue Gas Desulfurization Units |
| PTC 42 |
Wind Turbines |
| PTC 46 |
Performance Test Code on Overall Plant Performance |
| PTC 50 |
Fuel Cell Power Systems Performance |
| PTC PM |
Performance Monitoring Guidelines for Steam Power Plants |
| PVHO-1 |
Safety Standard for Pressure Vessels for Human Occupancy |
| QAI-1 |
Qualifications for Authorized Inspection |
| QAI-1 INTERPRETATIONS |
Interpretations to QAI-1-1995 Qualifications for Authorized Inspection |
| QEI-1 |
Standard for the Qualification of Elevator Inspectors |
| QEI MARCH-02 |
Companies Holding QEI Certificates of Accreditation |
| QRO-1 |
Standard for the Qualification and Certification of Resource Recovery Facility Operators |
| QRO MARCH-02 |
Individuals Holding QRO Certificates of Certification |
| RA-S-2002 |
Standard for Probabilistic Risk Assessment for Nuclear Power Plant Applications |
| RTP-1 |
Reinforced Thermoset Plastic Corrosion Resistant Equipment |
| RTP-1 INTERPRETATIONS |
Interpretations to RTP-1-1995 Reinforced Thermoset Plastic Corrosion Resistant Equipment |
| SI-1 |
Orientation and Guide for Use of SI (Metric) Units |
| TDP-1 |
Recommended Practices for the Prevention of Water Damage to Steam Turbines Used for Electric Power Generation |
| Y14.1 |
Decimal Inch Drawing Sheet Size and Format |
| Y14.1M |
Metric Drawing Sheet Size and Format |
| Y14.3 |
Multiview and Sectional View Drawings |
| Y14.4M |
Pictorial Drawing |
| Y14.5.1M |
Mathematical Definition of Dimensioning and Tolerancing Principles |
| Y14.5M |
Dimensioning and Tolerancing |
| Y14.6 |
Screw Thread Representation |
| Y14.8M |
Castings and Forgings |
| Y14.24 |
Types and Applications of Engineering Drawings |
| Y14.32.1M |
Chassis Frames - Passenger Car and Light Truck - Ground Vechicle Practices |
| Y14.34M |
Associated Lists |
| Y14.35M |
Revision of Engineering Drawings and Associated Documents |
| Y14.36M |
Surface Texture Symbols |
| Y14.38 |
Abbreviations and Acronyms |
| Y32.7 |
Graphic Symbols for Railroad Maps and Profiles |
| Y32.18 |
Symbols for Mechanical and Acoustical Elements as Used in Schematic Diagrams |