|
ASME B30.20 INTERPRETATIONS |
Interpretations to B30.20-1993 Below-The-Hook Lifting Devices |
|
ASME B30.21 |
Manually Lever Operated Hoists |
|
ASME B30.21 INTERPRETATIONS |
Interpretations to B30.2-1994 Manually Lever Operated Hoists |
|
ASME B30.22 |
Articulating Boom Cranes |
|
ASME B30.22 INTERPRETATIONS |
Interpretations to B30.22-1993 Articulating Boom Cranes |
|
ASME B30.23 |
Personnel Lifting Systems |
|
ASME B30.25 |
Scrap and Material Handlers |
|
ASME B30.26 |
Rigging Hardware Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings |
|
ASME B30.3 |
Construction Tower Cranes |
|
ASME B30.3 INTERPRETATIONS |
Interpretations to B30.3-1996 Hammerhead Tower Cranes |
|
ASME B30.4 |
Portal, Tower, and Pedestal Cranes |
|
ASME B30.5 |
Mobile and Locomotive Cranes |
|
ASME B30.5 INTERPRETATIONS |
Interpretations to B30.5-1994 Mobile and Locomotive Cranes |
|
ASME B30.6 |
Derricks |
|
ASME B30.6 INTERPRETATIONS |
Interpretations to B30.6-1995 Derricks |
|
ASME B30.7 |
Base Mounted Drum Hoists |
|
ASME B30.8 |
Floating Cranes and Floating Derricks |
|
ASME B30.8 INTERPRETATIONS |
Interpretations to B30.8-1993 Floating Cranes and Floating Derricks |
|
ASME B30.9 |
Slings |
|
ASME B30.9 INTERPRETATIONS |
Interpretations to B30.9-1996 Slings |
|
ASME B31.1 |
Power Piping |
|
ASME B31.1 CASES NO. 25 |
Cases No. 25 to B31.1 Power Piping |
|
ASME B31.1 CASES NO. 26 |
Cases No. 26 to B31.1 Power Piping |
|
ASME B31.1 INTERPRETATIONS |
Interpretations to B31.1-1998 Power Piping-Includes Interpretations No. 2 Through 6, 8 through 10, 13,15, 17 through 25, and 27 through 31 |
|
ASME B31.11 |
Slurry Transportation Piping Systems |
|
ASME B31.11 INTERPRETATIONS |
Interpretations to B31.11-1989 Slurry Transportation Piping Systems |
|
ASME B31.2 |
Fuel Gas Piping |
|
ASME B31.3 |
Process Piping |
|
ASME B31.3 INTERPRETATIONS |
Interpretations to B31.3-1999 Process Piping-Includes Interpretations No. 1 Through 18 |
|
ASME B31.4 |
Pipeline Transportation Systems for Liquid Hydrocarbons and other Liquids |
|
ASME B31.4 INTERPRETATIONS |
Intrepretations to B31.4-1998 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids-Includes Interpretation No. 5 |
|
ASME B31.5 |
Refrigeration Piping and Heat Transfer Components-Addenda: 2004 |
|
ASME B31.5 INTERPRETATIONS |
Interpretations to B31.5-1992 Refrigreration Piping-Includes Interpretation No. 5 |
|
ASME B31.8 |
Gas Transmission and Distribution Piping Systems |
|
ASME B31.8 INT NO.11 |
Interpretations NO.11 to B31.8 Gas Transmission and Distribution Piping Systems |
|
ASME B31.8S |
Managing System Integrity of Gas Pipelines-Supplement to ASME B31.8 |
|
ASME B31.9 |
Building Services Piping |
|
ASME B31.9 INTERPRETATIONS |
Interpretations to B31.9-1996 Building Services Piping- Includes Interpretation No. 1-3 |
|
ASME B31G |
Manual for Determining the Remaining Strength of Corroded Pipelines a Supplement to ASME B31 Code for Pressure Piping |
|
ASME B32.100 |
Preferred Metric Sizes for Flat, Round, Square, Rectangular, and Hexagonal Metal Products |
|
ASME B32.3M |
Preferred Metric Sizes for Flat Metal Products |
|
ASME B32.4M |
Preferred Metric Sizes for Round, Square, Rectangle and Hexagon Metal Products-Revision of ANSI B32.4-1977 |
|
ASME B32.5 |
Preferred Metric Sizes for Tubular Metal Products Other Than Pipe-Errata - 1996 |
|
ASME B36.10M |
Welded and Seamless Wrought Steel Pipe |
|
ASME B36.19M |
Stainless Steel Pipe |
|
ASME B4.1 |
Preferred Limits and Fits for Cylindrical Parts |
|
ASME B4.2 |
Preferred Metric Limits and Fits |
|
ASME B4.3 |
General Tolerances for Metric Dimensioned Products |
|
ASME B40.100 |
Pressure Gauges and Gauge Attachments-Incorporating ASME B40.1- 1998 and ASME B40.7-1998; Addenda A - 12/31/2001 |
|
ASME B40.200 |
Thermometers, Direct Reading and Remote Reading-Addenda A:2003 |
|
ASME B46.1 |
Surface Texture (Surface Roughness, Waviness, and Lay) |
|
ASME B47.1 |
Gage Blanks-Revision of ANSI/ASME B47.1AM-1982 |
|
ASME B5.10 |
Machine Tapers |
|
ASME B5.11 |
Spindle Noses and Adjustable Adapters for Multiple Spindle Drilling Heads One of a Series of Standards for Small Tools and Machine Tool Elements |
|
ASME B5.18 |
Spindle Noses and Tool Shanks for Milling Machines |
|
ASME B5.1M |
T-Slots, Their Bolts, Nuts, and Tongues-Revision of ANSI B5.1-1975; Should Be Used Instead of ANSI B5.1. Which Was Cancelled in 1985 |
|
ASME B5.25 |
Punch and Die Sets |
|
ASME B5.25M |
Punch and Die Sets (Metric) |
|
ASME B5.35 |
Machine Mounting Specifications for Abrasive Discs and Plate Mounted Wheels-Errata - October 1985 |
|
ASME B5.40 |
Spindle Noses and Tool Shanks for Horizontal Boring Machines |
|
ASME B5.47 |
Milling Machine Arbor Assemblies |
|
ASME B5.48 |
Ball Screws-Errata - March 1979 |
|
ASME B5.49 |
Glossary of Power Press Terms |
|
ASME B5.50 |
"V" Flange Tool Shanks for Machining Centers with Automatic Tool Changers-Errata - February 1995 |
|
ASME B5.51M |
Preferred SI Units for Machine Tools |
|
ASME B5.52 |
Power Presses: General Purpose, Single-Point Gap Type |
|
ASME B5.54 |
Methods for Performance Evaluation of Computer Numerically Controlled Machining Centers-k |
|
ASME B5.55M |
Specification and Performance Standard, Power Press Brakes |
|
ASME B5.56M |
Specification and Performance Standard, Power Shears |
|
ASME B5.57 |
Methods for Performance Evaluation of Computer Numerically Controlled Lathes and Turning Centers |
|
ASME B5.60 |
Workholding Chucks: Jaw Type Chucks-Incorporating ASME B 5.60.1 and ASME B5.60.4 |
|
ASME B5.61 |
Power Presses: General Purpose, Single Action, Straight Side Type |
|
ASME B5.8 |
Chucks and Chuck Jaws |
|
ASME B5.9 |
Spindle Noses for Tool Room Lathes, Engine Lathes, Turret Lathes, and Automatic Lathes |
|
ASME B56.1 |
Safety Standard for Low Lift and High Lift Trucks |
|
ASME B56.1 INTERPRETATIONS |
Interpretations to B56.1 Safety Standard for Low Lift and High Lift Trucks |
|
ASME B56.10 |
Safety Standard for Manually Propelled High Lift Industrial Trucks-Special Notice - October 1993 |
|
ASME B56.11.1 |
Double Race or Bi-Level Swivel and Rigid Industrial Casters-Special Notice - October 1993 |
|
ASME B56.11.4 |
Hook-Type Forks and Fork Carriers for Powered Industrial Forklift Trucks-Special Notice - February 1993; Addenda A - 7/22/1994 |
|
ASME B56.11.5 |
Measurements of Sound Emitted by Low Lift, High Lift, and Rough Terrain Powered Industrial Trucks-Special Notice - October 1993; Addenda A - 11/15/1994 |
|
ASME B56.11.6 |
Evaluation of Visibility from Powered Industrial Trucks |
|
ASME B56.11.7 |
Liquid Propane Gas (LPG) Fuel Cylinders (Horizontal or Vertical) Mounting - Liquid Withdrawal - For Powered Industrial Trucks |
|
ASME B56.5 |
Safety Standard for Guided Industrial Vehicles and Automated Functions of Manned Industrial Vehicles |
|
ASME B56.5 INTERPRETATIONS |
Interpretations to B56.5-1993 Safety Standard for Guided Industrial Vehicles and Automated Functions of Manned Industrial Vehicles |
|
ASME B56.6 |
Safety Standard for Rough Terrain Forklift Trucks-Errata 3/2003 |
|
ASME B56.6 INTERPRETATIONS |
Interpretations to B56.6-1993 Safety Standard for Rough Terrain Forklift Trucks |
|
ASME B56.8 |
Safety Standard for Personnel and Burden Carriers-Addenda A - 10/15/1994 |
|
ASME B56.8 INTERPRETATIONS |
Interpretations to B56.8-1993 Safety Standard for Personnel and Burden Carriers |
|
ASME B56.9 |
Safety Standard for Operator Controlled Industrial Tow Tractors-Addenda A - 1992 |
|
ASME B56.9 INTERPRETATIONS |
Interpretations to B56.9-1992 Safety Standard for Operator Controlled Industrial Tow Tractors |
|
ASME B73.1 |
Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process-Replaces B73.1M |
|
ASME B73.2 |
Specification for Vertical In-Line Centrifugal Pumps for Chemical Process |
|
ASME B73.3 |
Specification for Sealless Horizontal End Suction Metallic Centrifugal Pumps for Chemical Process |
|
ASME B73.5M |
Specification for Thermoplastic and Thermoset Polymer Material Horizontal End Suction Centrifugal Pumps for Chemical Process |
|
ASME B89 TECH PAPER |
Space Plate Test Recommendations for Coordinate Measuring Machines |
|
ASME B89 TECH REPT |
Parametric Calibration of Coordinate Measuring Machines-Errata March 2002 |
|
ASME B89.1.10M |
Dial Indicators (for Linear Measurements) |
|
ASME B89.1.13 |
Micrometers |
|
ASME B89.1.17 |
Measurement of Thread Measuring Wires |
|
ASME B89.1.2M |
Calibration of Gage Blocks by Contact Comparison Methods (Through 20 in. and 500 mm) |
|
ASME B89.1.5 |
Measurement of Plain External Diameters for Use as Master Discs or Cylindrical Plug Gages |
|
ASME B89.1.6 |
Measurement of Plain Internal Diameters for Use as Master Rings and Ring Gages |
|
ASME B89.1.9 |
Gage Blocks-Errata: 12/2003 |
|
ASME B89.3.4M |
Axes of Rotation Methods for Specifying and Testing |
|
ASME B89.4.1 |
Methods for Performance Evaluation of Coordinate Measuring Machines- Revision of ASME B89.1.12M-1990; Addenda A - 6/8/1998; Addenda B - 2/8/2002 |
|
ASME B89.4.10 |
Methods for Performance Evaluation of Coordinate Measuring Systems Software-Erratum September 2003 |
|
ASME B89.4.22 |
Methods for Performance Evaluation of Articulated Arm Coordinate Measuring Machines-Date of Issuance: 8/12/2005 |
|
ASME B89.6.2 |
Temperature and Humidity Environment for Dimensional Measurement |
|
ASME B89.7.2 |
Dimensional Measurement Planning |
|
ASME B89.7.3.1 |
Guidelines for Decision Rules: Considering Measurement Uncertainty in Determining Conformance to Specifications |
|
ASME B89.7.3.3 |
Guidelines for Assessing the Reliability of Dimensional Measurement Uncertainty Statements |
|
ASME B94.11M |
Twist Drills |
|
ASME B94.19 |
Milling Cutters and End Mills |
|
ASME B94.2 |
Reamers |
|
ASME B94.21 |
Gear Shaper Cutters |
|
ASME B94.33 |
Jig Bushings |
|
ASME B94.33.1 |
Jig Bushings (Metric) |
|
ASME B94.35 |
Drill Drivers, Split-Sleeve, Collet Type |
|
ASME B94.37M |
Roller Turner Type Cutting Tools, Single Point-Revision of B94.37- 1972 |
|
ASME B94.49 |
Spade Drill Blades and Spade Drill Holders |
|
ASME B94.50 |
Basic Nomenclature and Definitions for Single-Point Cutting Tools |
|
ASME B94.51M |
Specifications for Band Saw Blades (Metal Cutting) |
|
ASME B94.52M |
Specifications for Hacksaw Blades |
|
ASME B94.53 |
Solid Steel Rectangular Metal Cutting Squaring Shear Knives Dimensional Tolerances |
|
ASME B94.54 |
Specifications for Hole Saws, Hole Saw Arbors, and Hole Saw Accessories |
|
ASME B94.55M |
Tool Life Testing with Single-Point Turning Tools-Revision of ANSI B94.34-1946 and B94.36-1956 |
|
ASME B94.6 |
Knurling |
|
ASME B94.7 |
Hobs |
|
ASME B94.9 |
Taps: Ground and Cut Threads (Inch and Metric Sizes)-Errata - October 2001 |
|
ASME B96.1 |
Welded Aluminum-Alloy Storage Tanks |
|
ASME BPE |
Bioprocessing Equipment-Addenda A: 2004 |
|
ASME CSD- 1 |
Controls and Safety Devices for Automatically Fired Boilers |
|
ASME CSD-1 INTERPRETATIONS |
Interpretations to CSD-1 Controls and Safety Devices for Automatically Fired Boilers-Includes Interpretations Dated February 1989 thru June 2001 |
|
ASME FAP- 1 |
Quality Assurance Program Requirements for Fastener Manufacturers, Distributors, and Testing Laboratories |
|
ASME GUIDE 2001 |
Guide for ASME Stamp Holders |
|
ASME HPS |
High Pressure Systems |
|
ASME HST- 1 |
Performance Standard for Electric Chain Hoists |
|
ASME HST- 2 |
Performance Standard for Hand Chain Manually Operated Chain Hoists |
|
ASME HST- 3 |
Performance Standard for Manually Lever Operated Chain Hoists |
|
ASME HST- 4 |
Performance Standard for Overhead Electric Wire Rope Hoists |
|
ASME HST- 5 |
Performance Standard for Air Chain Hoists |
|
ASME HST- 6 |
Performance Standard for Air Wire Rope Hoists |
|
ASME MFC- 10M |
Method for Establishing Installation Effects on Flowmeters |
|
ASME MFC- 11M |
Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters |
|
ASME MFC- 14M |
Measurement of Fluid Flow Using Small Bore Precision Orifice Meters |
|
ASME MFC- 16M |
Measurement of Fluid Flow In Closed Conduits by Means of Electromagnetic Flowmeters |
|
ASME MFC- 18M |
Measurement of Fluid Flow Using Variable Area Meters |
|
ASME MFC- 1M |
Glossary of Terms Used in the Measurement of Fluid Flow in Pipes |
|
ASME MFC- 2M |
Measurement Uncertainty for Fluid Flow in Closed Conduits |
|
ASME MFC- 3M |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Date of Issuance: 8/15/2005 |
|
ASME MFC- 4M |
Measurement of Gas Flow by Turbine Meters |
|
ASME MFC- 5M |
Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters |
|
ASME MFC- 6M |
Measurement of Fluid Flow in Pipes Using Vortex Flowmeters |
|
ASME MFC- 7M |
Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles |
|
ASME MFC- 8M |
Fluid Flow in Closed Conduits : Connections for Pressure Signal Transmissions Between Primary and Secondary Devices |
|
ASME MFC- 9M |
Measurement of Liquid Flow in Closed Conduits by Weighing Methods-Errata - December 1989 |
|
ASME MH1 |
Pallets, Slip Sheets, and Other Bases for Unit Loads |
|
ASME N278.1 |
Self-Operated and Power-Operated Safety-Related Valves Functional Specification Standard, Reactor Plants and Their Maintenance |
|
ASME N509 |
Nuclear Power Plant Air-Cleaning Units and Components |
|
ASME N509 INTERPRETATIONS |
Interpretations to N509-1989 Nuclear Power Plant Air- Cleaning Units and Components |
|
ASME N510 |
Testing of Nuclear Air Treatment Systems-Errata: January 1991 |
|
ASME NOG- 1 |
Rules for Construction of Overhead and Gantry Cranes (Top Running Bridge, Multiple Girder) |
|
ASME NQA TECH REPT |
Comparison of ASME NQA-1 and ISO 9001 |
|
ASME NQA- 1 |
Quality Assurance Requirements for Nuclear Facility Applications |
|
ASME NQA-1 INTERPRETATIONS |
Interpretations to NQA-1-2000 Edition Quality Assurance Requirements for Nuclear Facility Applications |
|
ASME NUM- 1 |
Rules for Construction of Cranes, Monorails, and Hoists (With Bridge or Trolley or Hoist of the Underhung Type) |
|
ASME OM CODE |
Code for Operation and Maintenance of Nuclear Power Plants-Addenda A: 2005 |
|
ASME OM CODE CASES |
Code Cases to OM CODE Code for Operation and Maintenance of Nuclear Power Plants |
|
ASME OM CODE INTERPRETATIONS |
Interpretations to OM CODE-1998 Code for Operation and Maintenance of Nuclear Power Plants |
|
ASME OM- S/G |
Standards and Guides for Operation and Maintenance of Nuclear Power Plants-Addenda A: 2004; Addenda B: 2005 |
|
ASME PALD |
Safety Standard for Portable Automotive Lifting Devices |
|
ASME PALD INTERPRETATIONS |
Interpretations to PALD-1997 Safety Standard for Portable Automotive Lifting Devices |
|
ASME PCC- 1 |
Guidelines for Pressure Boundary Bolted Flange Joint Assembly |
|
ASME PTC 12.5 |
Single Phase Heat Exchangers |
|
ASME PVHO- 1 |
Safety Standard for Pressure Vessels for Human Occupancy |
|
ASME PVHO- 2 |
Safety Standard for Pressure Vessels for Human Occupancy In-Service Guidelines for PVHO Acrylic Windows |
|
ASME QAI- 1 |
Qualifications for Authorized Inspection |
|
ASME QAI-1 INTERPRETATIONS |
Interpretations to QAI-1-1995 Qualifications for Authorized Inspection |
|
ASME QEI- 1 |
Standard for the Qualification of Elevator Inspectors |
|
ASME QFO- 1 |
Standard for the Qualification and Certification of Operators of High Capacity Fossil Fuel Fired Plants |
|
ASME QHO- 1 |
STANDARD FOR THE QUALIFICATION AND CERTIFICATION OF HAZARDOUS WASTE INCINERATOR OPERATORS |
|
ASME QME- 1 |
Qualification of Active Mechanical Equipment Used in Nuclear Power Plants |
|
ASME QMO- 1 |
Qualification and Certification of Medical Waste Incinerator Operators |
|
ASME QRO- 1 |
Qualification and Certification of Resource Recovery Facility Operators-Addenda A - 9/30/1996; Addenda B - 5/15/1998 |
|
ASME RTP- 1 |
Reinforced Thermoset Plastic Corrosion Resistant Equipment-Addenda A: 2001; Addenda B: 2002; Addenda C: 2003; Addenda D: 2004 |
|
ASME RTP-1 INTERPRETATIONS |
Interpretations to RTP-1-1995 Reinforced Thermoset Plastic Corrosion Resistant Equipment |
|
ASME SI- 1 |
Orientation and Guide for Use of SI (Metric) Units |
|
ASME STS- 1 |
Steel Stacks-Addenda A: 2003 |
|
ASME TDP- 1 |
Recommended Practices for the Prevention of Water Damage to Steam Turbines Used for Electric Power Generation |
|
ASME Y14.1 |
Decimal Inch Drawing Sheet Size and Format |
|
ASME Y14.100 |
Engineering Drawing Practices |
|
ASME Y14.13M |
Mechanical Spring Representation |
|
ASME Y14.1M |
Metric Drawing Sheet Size and Format |
|
ASME Y14.24 |
Types and Applications of Engineering Drawings-Revision of ASME Y14.24M-1989 |
|
ASME Y14.2M |
Line Conventions and Lettering |
|
ASME Y14.3 |
Multiview and Sectional View Drawings |
|
ASME Y14.32.1M |
Chassis Frames - Passenger Car and Light Truck - Ground Vechicle Practices |
|
ASME Y14.34M |
Associated Lists |
|
ASME Y14.35M |
Revision of Engineering Drawings and Associated Documents |
|
ASME Y14.36M |
Surface Texture Symbols |
|
ASME Y14.38 |
Abbreviations and Acronyms-Revision and Redesignation of ASME Y1.1- 1989; Addenda A-2002 |
|
ASME Y14.41 |
Digital Product Definition Data Practices |
|
ASME Y14.42 |
Digital Approval Systems |
|
ASME Y14.43 |
Dimensioning and Tolerancing Principles for Gages and Fictures-Errata: July 2005 |
|
ASME Y14.4M |
Pictorial Drawing |
|
ASME Y14.5.1M |
Mathematical Definition of Dimensioning and Tolerancing Principles |
|
ASME Y14.5.2 |
Certification of Geometric Dimensioning and Tolerancing Professionals |
|
ASME Y14.5M |
Dimensioning and Tolerancing |
|
ASME Y14.6 |
Screw Thread Representation |
|
ASME Y14.7.1 |
Gear Drawing Standards - Part 1 for Spur, Helical, Double Helical and Rack-Partial Revision of Y14.7-58 |
|
ASME Y14.7.2 |
Gear and Spline Drawing Standards Part 2 - Bevel and Hypoid Gears |
|
ASME Y14.8M |
Castings and Forgings |
|
ASME Y32.18 |
Symbols for Mechanical and Acoustical Elements as Used in Schematic Diagrams |
|
ASME Y32.4 |
Graphic Symbols for Plumbing Fixtures for Diagrams Used in Architecture and Building Construction-Revision of ANSI Y32.4-54 |
|
ASME Y32.7 |
Graphic Symbols for Railroad Maps and Profiles |