|
Description:
The ASME Codes and Standards – Fasteners Collection – contains the following documents:
B18.1.1 Small Solid Rivets
This Standard covers data for small solid rivets, including an appendix covering formulas of which dimensional data are based.
B18.1.2 Large Rivets
This Standard covers data for large solid rivets, including an appendix covering formulas of which dimensional data are based.
B18.1.3M Metric Small Solid Rivets
This Standard covers data for metric small solid rivets, including an appendix covering formulas of which dimensional data are based.
B18.2.1 Square and Hex Bolts and Screws, Inch Series
This Standard covers data for inch series square and hex bolts and screws. Also included is data for thread runout sleeve gages, gaging procedure for checking bolt and screw straightness, grade markings for steel bolts and screws, formulas on which dimensional data are based, and a specification to assist in identifying a product as being a screw or bolt.
B18.2.2 Square and Hex Nuts, Inch Series
This Standard covers data for inch series square and hex nuts. Also included is data covering gaging of slots in slotted nuts, wrench openings for nuts, and formulas on which dimensional data are based.
B18.2.3.1M Metric Hex Cap Screws
This Standard covers data for metric series hex cap screws and a screw straightness and body position gage and gaging procedure.
B18.2.3.2M Metric Formed Hex Screws
This Standard covers data for metric formed hex screws and a screw straightness and body position gage and gaging procedure.
B18.2.3.3M Metric Heavy Hex Screws
This Standard covers data for metric heavy hex screws and a screw straightness and body position gage and gaging procedure.
B18.2.3.4M Metric Hex Flange Screws
This Standard covers the data for metric hex flange screws and a screw straightness gage and gaging procedure.
B18.2.3.5M Metric Hex Bolts
This Standard covers the general and dimensional data for metric hex bolts and a screw straightness gage and gaging procedure.
B18.2.3.6M Metric Heavy Hex Bolts
This Standard covers data for metric heavy hex bolts and a bolt straightness and body position gage and gaging procedure.
B18.2.3.7M Metric Heavy Hex Structural Bolts
This Standard covers the general and dimensional data for metric heavy hex structural bolts and a screw straightness gage and gaging procedure.
B18.2.3.8M Metric Hex Lag Screws
This Standard covers data for metric hex lag screws and a screw straightness and body position gage and gaging procedure.
B18.2.3.9M Metric Heavy Hex Flange Screws
This Standard covers data for metric heavy hex flange screws and a screw straightness and body position gage and gaging procedure.
B18.2.3.10M Square Head Bolts, Metric Series
This Standard covers data for metric square head bolts and a bolt straightness and body position gage and gaging procedure.
B18.2.4.1M Metric Hex Nuts, Style 1
This Standard covers the general and dimensional data for metric hex nuts, style 1.
B18.2.4.2M Metric Hex Nuts, Style 2
This Standard covers the general and dimensional data for metric hex nuts, style 2.
B18.2.4.3M Metric Slotted Hex Nuts
This Standard covers the general and dimensional data for metric slotted hex nuts.
B28.2.4.4M Metric Hex Flange Nuts
This Standard covers the general and dimensional data for metric hex flange nuts.
B18.2.4.5M Metric Hex Jam Nuts
This Standard covers the general and dimensional data for metric hex jam nuts.
B18.2.4.6M Metric Heavy Hex Nuts
This Standard covers the general and dimensional data for metric heavy hex nuts.
B18.2.6 Fasteners for Use in Structural Applications
This Standard covers the general and dimensional data for fasteners for use in structural applications.
B18.2.7.1M Metric 12-Spline Flange Screws
This Standard covers data for metric 12-spline flange screws and a screw straightness and body position gage and gaging procedure.
B18.2.8 Clearance Holes for Bolts, Screws and Studs
This Standard covers the recommended clearance hole sizes for #0 to 1.5 inch and M1.6 through M100 metric fasteners of clearing using a close, normal, and loose-fit category.
B18.2.9 Straightness Gage and Gaging for Bolts and Screws
This standard describes a gage and gaging procedure for checking bolt or screw straightness at maximum material condition (MMC).
B18.3 Socket Cap, Shoulder and Set Screws, Hex and Spline Keys, Inch Series
This Standard covers general and dimensional data for various types of hexagon and spline (luted) socket cap screws, shoulder screws, set screws, and hexagon and spline keys.
B18.3.1M Socket Head Cap Screws, Metric Series
This Standard contains general and dimensional data for metric series hexagon socket head cap screws in sizes from 1.6-48mm and spline socket head cap screws in sizes from 1.6-8mm.
B18.3.2M Hexagon Keys and Bits, Metric Series
This Standard contains the complete dimensional, mechanical and performance requirements for Metric Series Hexagon Keys and Bits of nominal sizes from 0.7mm to 36mm.
B18.3.3M Hexagon Socket Head Shoulder Screws, Metric Series
This Standard contains complete dimensional, mechanical, and performance requirements for Metric Series Hexagon Socket Head Shoulder Screws with nominal shoulder diameters from 6.5 mm to 25 mm.
B18.3.4M Hexagon Socket Button head Cap Screws, Metric Series
This Standard contains the general and dimensional requirements for Metric Series Hexagon Socket Button Head Cap Screws of nominal sizes from 3 mm to 16 mm.
B18.3.5M Hexagon Socket Flat Countersunk Head Cap Screws, Metric Series
This Standard contains the general and dimensional requirements for Metric Series Hexagon Socket Flat Countersunk Head Cap Screws of nominal sizes from 3 mm to 20 mm.
B18.3.6M Socket Set Screws, Metric Series
This Standard contains general and dimensional requirements for metric series socket set screws of nominal sizes from 1.6 mm to 24 mm.
B18.5 Round Head Bolts, Inch Series
This Standard covers data for the various types of inch series bolts generally classified as round head bolts and a screw straightness gage and gaging procedure.
B18.5.2.1M Round Head Short Square Neck Bolts, Metric Series
This Standard covers data for metric round head short square neck bolts and a bolt straightness and body position gage and gaging procedure.
B18.5.2.2M Round Head Square Neck Bolts, Metric Series
This Standard covers data for metric round head square neck bolts and a bolt straightness and body position gage and gaging procedure.
B18.5.2.3M Round Head Square Neck Bolts with Large Head, Metric Series
This Standard covers data for metric round head square neck bolts with large head and a bolt straightness and body position gage and gaging procedure.
B18.6.1 Wood Screws, Inch Series
This Standard covers data for slotted and recessed head wood screws, and a procedure for penetration gaging and wobble gaging of recessed head screws.
B18.6.2 Slotted Head Cap Screws, Square Head Set Screws and Slotted Headless Set Screws, Inch Series
This Standard covers data for slotted head cap screws and square head and slotted headless set screws, thread runout sleeve gages, protrusion gaging, and wrench openings.
B18.6.3 Machine Screws and Machine Screw Nuts
This Standard covers slotted and recessed head machine screws and machine screw nuts, protrusion gaging, across-corners gaging, penetration gaging, wobble gaging, and wrench openings.
B18.6.4 Thread Forming and Thread Cutting Tapping Screws and Metallic
This Standard covers data for slotted and recessed head tapping screws, metallic drive screws, protrusion gaging, across-corners gaging, penetration and wobble gaging.
B18.6.5M Metric Thread-Forming and Thread-Cutting Tapping Screws
This Standard covers data for slotted and recessed head metric tapping screws, protrusion gaging, across-corners gaging, and penetration and wobble gaging.
B18.6.7M Metric Machine Screws
This Standard covers data for flat and oval countersunk, pan slotted and recessed head machine screws, protrusion gaging, across-corners gaging, penetration and wobble gaging.
B18.7 General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps
This standard covers complete general and dimensional data for semi-tubular rivets, full tubular rivets, split rivets and rivet caps for use in general purpose applications.
B18.7.1M Metric General Purpose Semi-Tubular Rivets
This Standard covers data for metric general purpose semi-tubular rivets.
B18.8.1 Clevis Pins and Cotter Pins, Inch Series
This Standard covers the complete dimensional and general data for clevis pins and cotter (split) pins.
B18.8.2 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins, Inch Series
This Standard covers data for taper, dowel, straight, grooved, and spring pins, and information for the drilling of holes for taper pins and the testing of pins in double shear.
B18.8.100M Spring Pins: Coiled Type; Spring Pins: Slotted; Machine Dowel Pins: Hardened Ground; and Grooved Pins, Metric Series
This Standard covers data for metric series coiled spring pins, slotted spring pins, hardened ground pins, and grooved pins.
B18.8.200M Cotter Pins, Headless Clevis Pins and Header Clevis Pins, Metric Series
This Standard covers data for metric series cotter pins, headless clevis pins, and headed clevis pins.
B18.9 Plow Bolts, Inch Series
This Standard covers data for inch series plow bolts.
B18.10 Track Bolts and Nuts
This Standard covers the dimensional data for inch series oval and elliptic neck track bolts and square nuts for use with these bolts.
B18.11 Miniature Screws
This Standard covers data for inch series miniature screws.
B18.12 Glossary of Terms for Mechanical Fasteners
This Standard is a summary of nomenclature and terminology currently used to define and/or describe mechanical fasteners, related characteristics, and the manufacturing processes that produce these products.
B18.13 Screw and Washer Assemblies–Sems, Inch Series
This Standard covers general and dimensional data pertinent to the various types of screw and captive washer assemblies, otherwise known as sems.
B18.13.1M Screw and Washer Assemblies-Sems, Metric Series
This Standard covers general and dimensional data pertinent to the various types of screw and captive washer assemblies, otherwise known as sems.
B18.15 Forged Eyebolts
This Standard covers data for forged threaded eyebolts intended primarily for lifting applications.
B18.15M Metric Lifting Eyes
This Standard covers data for metric series lifting eyes, including periodic inspection and application.
B18.16M Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts
This Standard covers data for prevailing-torque type steel metric hex nuts and hex flange nuts.
B18.18.1 Inspection and Quality Assurance for General Purpose Fasteners
This standard outlines a Quality Assurance (QA) plan for internally and externally threaded fasteners and accessories or associated parts.
B18.18.1 Inspection and Quality Assurance for General Purpose Fasteners
This standard outlines a Quality Assurance (QA) plan for internally and externally threaded fasteners and accessories or associated parts.
B18.18.2M Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners
This Standard outlines a Quality Assurance (QA) plan for internally and externally threaded fasteners and accessories or associated parts.
B18.18.2M SUPPLEMENT (Supplement of ASME B18.18.2M) Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners
This Supplement outlines a Quality Assurance (QA) plan for internally and externally threaded fasteners and accessories or associated parts.
B18.18.3M Inspection and Quality Assurance for Special Purpose Fasteners
This standard outlines a quality assurance (QA) plan for internally and externally threaded fasteners and accessories or associated parts.
B18.18.4M Inspection and Quality Assurance for Fasteners for Highly Specialized Engineered Applications for Metric Fasteners
This Standard outlines a Quality Assurance (QA) plan for internally and externally threaded fasteners and accessories or associated parts.
B18.18.5M Inspection and Quality Assurance Plan Requiring In-Process Inspection and Control
This Standard outlines a Quality Assurance (QA) plan for internally and externally threaded fasteners and accessories or associated parts.
B18.18.6M Quality Assurance Plan for Fasteners Produced in a Third Party Accreditation System
This Standard covers third party registration, which is the successful conclusion of a structured auditing and approval board process.
B18.18.7M Quality Assurance Plan for Fasteners Produced in a Customer Approved Control Plan
This Standard covers the control plan outlining the fastener mfg. process & identification of its control points that provides an orderly procedure for controlling & minimizing the product variation.
B18.2.9 Straightness Gage and Gaging for Bolts and Screws
This Standard describes a gage and gaging procedure for checking bolt or screw straightness at maximum material condition (MMC).
B18.21.1 Lock Washers, Inch Series
This Standard covers the dimensions, physical properties, and methods of testing for helical spring and tooth lock washers.
B18.21.2M Lock Washers, Metric Series
This Standard covers the dimensions, physical properties, and methods of testing for helical spring and tooth lock washers.
B18.22.1 Plain Washers
This Standard covers two types of general purpose plain washers designated as type a and type b.
B18.22M Metric Plain Washers
This Standard covers general specifications and dimensions for flat, round hole washers, both soft (as fabricated) and hardened, intended for use in general purpose applications.
B18.24 Part Identifying Number (PIN) Code System Standard for B18 Fastener Products
This Standard provides users with the capability to identify externally threaded, internally threaded, and non-threaded fastener products by a pre-selected order of coding as specified in the Standard.
B18.25.1M Square and Rectangular Keys and Keyways
This standard covers data for metric series square and rectangular keys and keyways with a relatively tight width tolerance.
B18.25.2M Woodruff Keys and Keyways
This standard covers data for metric series Woodruff keys and keyways.
B18.25.3M Square and Rectangular Keys and Keyways: Width Tolerances and Deviations Greater than Basic Size
This standard covers data for metric series square and rectangular keys and keyways with a relatively loose width tolerance.
B18.27 Tapered and Reduced Cross Section Retaining Rings, Inch Series
This Standard covers data for external and internal (heavy duty, bowed, inverted, beveled, self-locking/interlocking) and c-ring, e-ring, and external bowed locking prongs of retaining rings.
B18.29.1 Helical Coil Screw Thread Inserts – Free Running and Screw Locking, Inch Series
This Standard is intended to delineate the dimensional data for the inch series helical coil screw thread insert and the threaded hole into which it is installed.
B18.29.2M Helical Coil Screw Thread Inserts – Free Running and Screw Locking, Metric Series
This Standard delineates the dimensional, mechanical, and performance data for the metric series helical coil screw thread insert and threaded hole into which it is installed.
B18.30.1M Open-End Blind Rivets with Break Mandrels, Metric Series
This Standard establishes the dimensional, mechanical, and performance requirements of open-end blind rivets with break mandrels (metric series).
B18.31.1M Metric Continuous and Double End Studs
This standard covers data for metric series continuous and double end (clamping and tap end types) studs.
Online Access - Subscribers get secure online access to search, view, bookmark, track, and print documents according to the license agreement. Online documents are updated daily. Multiple users can share a single license. You also get access to IHS Standards bibliographic data – more than 1 Million documents.
Individual Documents - IHS sells individual documents through the IHS Standards Store in electronic or hardcopy formats. Statistics show that 1 out of every 5 people who purchase individual documents would benefit from an online subscription. You should consider a collection over individual document purchases if your company buys more than $3,000 in standards per year. |