|
Description:
The ASME Codes and Standards – Fittings, Flanges and Gaskets Collection – contains the following documents:
B16.1 Gray Iron Pipe Flange and Flanged Fittings (Classes 25, 125 and 250)
This Standard covers Classes 25, 125 and and 250 Gray Iron Pipe Flanges and Flanged Fittings. It includes pressure-temperature ratings; sizes and method of designating openings of reducing fittings; marking; materials; dimensions and tolerances; bolting and gaskets; and pressure testing.
B16.3 Malleable Iron Threaded Fittings (Classes 150 and 300)
This Standard covers malleable iron threaded fittings, Classes 150 and 300. It also contains provisions for using steel for caps and couplings in Class 150 for NPS 3/8 and smaller. This Standard includes pressure–temperature ratings; size and method of designating openings of reducing fittings; marking; material; dimensions and tolerances; threading and coatings.
B16.4 Gray Iron Threaded Fittings (Classes 125 and 250)
This covers pressure-temperature ratings, sizes, designation of openings, marking, materials, dimensions and tolerances, threading and coating for Class 125 and 250 gray iron threaded fittings.
B16.5 Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24
This covers pressure-temperature ratings, sizes, marking, materials, dimensions and tolerances, for pipe flanges and flanged fittings of class designations 150, 300, 400, 600, 900, 1500, and 2500.
B16.9 Factory-Made Wrought Buttwelding Fittings
This covers overall dimensions, tolerances, ratings, testing, and markings for wrought carbon and alloy steel factory-made buttwelding fittings of NPS 1/2 through 48.
B16.11 Forged Fittings, Socket-Welding and Threaded
This Standard covers ratings, dimensions, tolerances, marking and material requirements for socket-welded and threaded forged fittings, of class 400, 600, 900, 1500, and 2500.
B16.12 Cast Iron Threaded Drainage Fittings
This covers cast iron threaded drainage fittings including size and method of designating openings in reducing fittings, marking, materials, dimensions and tolerances and threading and coatings.
B16.14 Ferrous Pipe Plugs, Bushings and Locknuts with Pipe Threads
This covers ferrous pipe plugs, bushings, and locknuts with pipe threads including requirements for pressure-temperature ratings, size, marking, materials dimensions and tolerances and threading.
B16.15 Cast Copper Alloy Threaded Fittings (Classes 125 and 250)
This Standard covers cast Classes 125 and 250 copper alloy threaded pipe fittings with provisions for substituting wrought copper alloys for plugs, bushings, caps, and couplings in small sizes. This Standard includes pressure–temperature ratings; size and method of designating openings of reducing pipe fittings; marking requirements; minimum requirements for casting quality and materials; dimensions and tolerances in SI (metric) and U.S. Customary units; threading requirements; and pressure test requirements.
B16.18 Cast Copper Alloy Solder Joint Pressure Fittings
This covers cast copper alloy solder joint pressure fittings designed for copper water tubes, including pressure-temperature ratings, size, marking, materials, dimensions and tolerances and tests.
B16.20 Metallic Gaskets for Pipe Flanges: Ring-Joint, Spiral-Wound, and Jacketed
This Standard covers materials, dimensions, tolerances, and markings for metal ring-joint gaskets, spiral-wound metal gaskets and metal jacketed gaskets used with raised face and flat face flanges.
B16.21 Nonmetallic Flat Gaskets for Pipe Flanges
This Standard covers types, sizes, materials, dimensions, tolerances, and markings for nonmetallic flat gaskets used with various flange standards.
B16.22 Wrought Copper and Copper Alloy Solder Joint Pressure Fittings
This Standard has pressure temperature ratings, materials, dimensions and tolerances and tests for wrought copper and copper alloy, solder-joint seamless fittings, used with seamless copper tube.
B16.23 Cast Copper Alloy Solder Joint Drainage Fittings: DWV
This Standard provides requirements for sizes, marking, material and dimensions and tolerances for cast copper alloy solder joint drainage fittings, for use in drains, waste, and vent (DWV) systems.
B16.24 Cast Copper Alloy Pipe Flanges and Flanged Fittings (Classes 150, 300, 600, 900, 1500 and 2500)
This Standard covers pressure temperature ratings, materials, dimensions, tolerances, gaskets, and tests for Classes 150, 300, 600, 900, 1500, and 2500 Cast Copper Pipe Flanges and Flanged Fittings.
B16.25 Buttwelding Ends
This Standard covers preparation of buttwelding ends of piping components joined into a piping system by welding, including welding bevels for heavy-wall components, and preparation of internal ends.
B16.26 Cast Copper Alloy Fittings for Flared Copper Tubes
This Standard covers pressure rating, materials, dimensions, threading and hydrostatic testing cast copper alloy fittings and nuts used with flared seamless copper tube conforming to ASTM B 88.
B16.28 Wrought Steel Buttwelding Short Radius Elbows and Returns
This Standard covers ratings, overall dimensions, testing, tolerances, and markings for wrought carbon and alloy steel buttwelding short radius elbows and returns.
B16.29 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings: DWV
This Standard covers sizes, marking, material, dimensions and tolerances for wrought copper and wrought copper alloy solder joint drainage fittings, designed for use with copper drainage tube.
B16.36 Orifice Flanges
This Standard covers flanges that have orifice pressure differential connections, limited to welding neck flanges Classes 300, 400, 600, 900, 1500, and 2500 and slip-on and threaded Class 300.
B16.39 Malleable Iron Threaded Pipe Unions (Classes 150, 250 and 300)
This Standard covers requirements for design, pressure-temperature ratings, size, materials, joints and seats, threads and dimensions for threaded malleable iron unions, classes 150, 250, and 300.
B16.42 Ductile Iron Pipe Flanges and Flanged Fittings (Classes 150 and 300)
This Standard covers pressure-temperature ratings, marking, materials, dimensions and tolerances, and tests for Class 150 and 300 cast ductile iron pipe flanges and flanged fittings.
B16.45 Cast Iron Fittings for Sovent Drainage Systems
This Standard covers sizes, marking, material, dimensions and tolerances, and tests for cast iron drainage fittings used on self-aerating, one-pipe sovent drainage systems.
B16.47 Large Diameter Steel Flanges: NPS 26 through NPS 60 Metric/Inch Standard
This Standard covers pressure-temperature ratings, materials, dimensions, tolerances, marking, and testing for pipe flanges NPS 26 through NPS 60 and in Classes 75, 150, 300, 400, 600, and 900.
B16.48 Steel Line Blanks
This Standard covers pressure-temperature ratings, dimensions, and testing for operating line blanks NPS 1/2 through NPS 24 installed between B16. 5 flanges, Class 150, 300, 600, 900, 1500, and 2500.
B16.49 Factory-Made Wrought Steel Buttwelding Induction Bends for Transportation and Distribution Systems
This Standard covers design, material, manufacturing, testing, marking, and inspection requirements for factory-made pipeline bends of carbon steel materials produced by the induction bending process.
B16.50 Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings
This Standard covers wrought copper and wrought copper alloy braze joint seamless fittings used with seamless copper tube conforming to ASTM Standard Specification, B 88, B 280, and B 819.
PCC-1 Guidelines for Pressure Boundary Bolted Flange Joint Assembly
These guidelines apply to pressure boundary flanged joints used for effective joint assembly in a broad range of sizes and service conditions normally encountered in the process industries.
Online Access - Subscribers get secure online access to search, view, bookmark, track, and print documents according to the license agreement. Online documents are updated daily. Multiple users can share a single license. You also get access to IHS Standards bibliographic data – more than 1 Million documents.
Individual Documents - IHS sells individual documents through the IHS Standards Store in electronic or hardcopy formats. Statistics show that 1 out of every 5 people who purchase individual documents would benefit from an online subscription. You should consider a collection over individual document purchases if your company buys more than $3,000 in standards per year. |