|
Description:
The ASME Codes and Standards – Plumbing Collection – contains the following documents:
A112.1.2 Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water-Connected Receptors)
This Standard identifies methods of protection against back siphonage through means of an air gap, and establishes requirements/methods of testing air gaps for plumbing fixtures and water receptors.
A112.1.3 Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances
This Standard establishes physical requirements and methods of testing for air gap fittings for protecting against back siphonage and back pressure backflow.
A112.3.1 Performance Standard and Installation Procedures for Stainless Steel Drainage System for Sanitary, Storm and Chemical Applications, Above and Below Ground
This Standard covers performance and installation requirements for stainless steel pipe, fittings, joints, and drains for use in plumbing waste, vent (DWV), and chemical waste systems.
A112.3.4 Macerating Toilet Systems and Related Components
This Standard establishes physical, performance, and testing requirements applicable to macerating toilet systems and related components.
A112.4.1 Water Heater Relief Valve Drain Tubes
This Standard covers the test methods and performance requirements applicable to water heater relief valve drain tubes for use with valves having a steam rating of 100,000 BTU per hour or less.
A112.4.2 Water Closet Personal Hygiene Devices
This Standard establishes general and performance requirements for bidet sprays and other optional features as applied to water closets, water closet seats, and other retrofit devices.
A112.4.3 Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System
This Standard establishes physical, performance, and testing requirements applicable to the joint that connects a water closet to the sanitary drain piping of a plumbing system.
A112.4.7 Point of Use and Branch Water Submetering Systems
This Standard establishes the requirements and test methods applicable to point of use and branch submetering systems in the plumbing serving a single residence downstream of the main utility meter.
A112.4.14 Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems
This Standard establishes requirements for manually operated, quarter-turn valves in nominal sizes less than or equal to NPS 2. These valves are for indoor installation as potable water shutoff.
A112.6.1M Floor-Affixed Supports for Off-the-Floor Plumbing Fixtures for Public Use
This Standard includes definitions; materials and finishes; strength and deflection requirements; and details of floor-affixed supports for off-the-floor plumbing fixtures.
A112.6.2 Framing-Affixed Supports for Off-the-Floor Water Closets with Concealed Tanks
This Standard establishes minimum performance requirements for framing-affixed supports for off-the-floor water closets with concealed tanks.
A112.6.3 Floor Drains and Trench Drains
This Standard establishes design requirements for floor, area, adjustable floor, and trench drains that are used inside of, or outside and immediately adjacent to, buildings that are nonresidential.
A112.6.4 Roof, Deck and Balcony Drains
This Standard establishes minimum design requirements for roof drains, which convey rainwater from the roof area of building structures.
A112.6.7 Enameled and Epoxy Coated Cast Iron and PVC Plastic Sanitary Floor Sinks
This Standard applies to enameled and epoxy coated cast iron and PVC plastic sanitary floor sinks, and includes requirements for material, construction, inspection, testing, and marking.
A112.6.9 Siphonic Roof Drains
This Standard establishes minimum requirements and provides guidelines for the proper design, installation, examination, and testing of siphonic roof drains.
A112.14.1 Backwater Valves
This Standard establishes requirements for dimensions, performance requirements, connections, materials and finishes, testing, and marking of backwater valves.
A112.14.3 Grease Interceptors
This Standard covers general product requirements as well as the performance criteria for the testing and rating of grease interceptors, whose rated flows are 100 gpm (380 L/m) or less.
A112.14.4 Grease Removal Devices
This Standard establishes requirements for grease interceptors that are equipped with automatic grease removal devices (GRD). It includes testing requirements and performance criteria.
A112.14.6 FOG (Fats, Oils and Greases) Disposal Systems
This Standard establishes requirements for fats, oils, and greases (FOG) disposal systems designed to remove FOG from effluent, and internally dispose of retained FOG.
A112.18.1 Plumbing Supply Fittings
This Standard applies to plumbing supply fittings and accessories located between the supply line stop and the terminal fitting.
A112.18.2 Plumbing Waste Fittings
This Standard covers plumbing waste fittings of sizes NPS-2 and smaller.
A112.18.3 Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings
This Standard addresses functional performance and requires physical characteristics of devices and systems that provide backflow protection.
A112.18.6 Flexible Water Connectors
This Standard establishes requirements for flexible water connectors used in potable water systems under continuous pressure and in accessible locations only.
A112.18.7 Deck Mounted Bath/Shower Transfer Valves with Integral Backflow Protection
This Standard establishes requirements for deck mounted, bath/shower transfer valves with integral back-flow protection on the secondary outlets.
A112.19.1M Enameled Cast Iron Plumbing Fixtures
This Standard applies to enameled cast iron plumbing fixtures and includes requirements for materials, construction, inspection, testing, marking, and definitions.
A112.19.2 Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals
This Standard establishes requirements and test methods pertaining to materials, significant dimensions, and functional performance for vitreous china plumbing fixtures.
A112.19.3 Stainless Steel Plumbing Fixtures (Designed for Residential Use)
This Standard establishes the requirements for the types, thicknesses, and finish of stainless steel metal used for the fixtures and certain features of construction designed for residential use.
A112.19.4M Porcelain Enameled Formed Steel Plumbing Fixtures
This Standard covers materials, methods of inspection, dimensions, testing, and identification of porcelain enameled formed steel plumbing fixtures.
A112.19.5 Trim for Water-Closet Bowls, Tanks and Urinals
This Standard establishes criteria for those items of trim for water-closet bowls, tanks, and urinals known as spuds, locknuts for spuds, flush valves, and flush elbows.
A112.19.6 Hydraulic Performance Requirements for Water Closets and Urinals
This Standard establishes sanitary performance requirements and test procedures for water closets and urinals discharging into gravity waste systems in permanent buildings and structures.
A112.19.7 Hydromasssage Bathtub Appliances
This Standard establishes performance criteria for whirlpool and air-jetted bathtub appliances and suction fittings used in whirlpool bathtub appliances.
A112.19.8 Suction Fittings for Use in Swimming Pools, Wading Pools, Spas and Hot Tubs
This Standard establishes requirements for suction fittings, which are designed to be totally submerged for use in swimming pools, wading pools, spas, hot tubs, and whirlpool bathtub appliances.
A112.19.9M Non-Vitreous Ceramic Plumbing Fixtures
This Standard covers requirements and test methods pertaining to material, grading, dimensions, certain features of construction, and types and sizes of plumbing fixtures of non-vitreous ceramic.
A112.19.10 Dual Flush Devices for Water Closets
This Standard covers requirements and test methods pertaining to dual flush devices that are installed within water closet tanks that use 3.5 gpf (13.2 Lpf) or greater volume.
A112.19.12 Wall Mounted, Pedestal Mounted, Adjustable, Elevating, Tilting, and Pivoting Lavatory, Sink, and Shampoo Bowl Carrier Systems and Drain Waste Systems
This Standard establishes requirements for wall and pedestal mounted adjustable and pivoting lavatories and sink carrier systems to facilitate use by individuals who have impaired physical mobility.
A112.19.13 Electrohydraulic Water Closets
This Standard establishes performance, electrical/electronic conformance, temperature, life cycle, marking, and identification requirements for electrohydraulic water closets.
A112.19.14 Six-Liter Water Closets Equipped with a Dual Flushing Device
This Standard establishes physical, material, testing, and marking requirements for six-liter water closets that incorporate a water-conserving, dual-flushing feature into the fixture.
A112.19.15 Bathtubs/Whirlpool Bathtubs with Pressure Sealed Doors
This Standard establishes material, mechanical, electrical, marking, and testing requirements for bathtubs/whirlpool bathtubs with doors that are made water tight by the use of a pressure seal.
A112.19.16 Terrazzo Plumbing Fixtures
This Standard establishes the minimum requirements for terrazzo materials that are used to manufacture plumbing fixtures for general use.
A112.19.17 Manufactured Safety Vacuum Release Systems (SVRS) for Residential and Commercial Swimming Pool, Spa, Hot Tub, and Wading Pool Suction Systems
This Standard establishes requirements, dimensions and tolerances, materials, installation instructions, testing requirements, and markings and identification for safety vacuum release system devices.
A112.19.19 Vitreous China Nonwater Urinals
This Standard establishes requirements and test methods pertaining to materials, significant dimensions and functional performance for vitreous china non-water urinals.
A112.20.1 Qualification of Installers of High Purity Piping Systems
This Standard establishes minimum training and performance criteria for high purity piping system installers.
A112.20.2 Qualification of Installers of Firestop Systems and Devices For Piping Systems
This Standard establishes minimum requirements for the training and qualification of installers of firestop systems and devices for piping systems.
A112.21.3M Hydrants for Utility and Maintenance Use
This Standard covers hydrants including nonfreeze wall, ground, post, and floor types and moderate climate wall and floor types, which are used in buildings and grounds as water supply terminals.
A112.36.2M Cleanouts
This standard covers cleanouts, including floor and wall types used in concealed piping in and adjacent to commercial, industrial, institutional, and other buildings open to public use.
B31.9 Building Services Piping
This Code has rules for piping systems for building services in industrial, institutional, commercial and public buildings and multi-unit residences either in the building or within property limits.
Online Access - Subscribers get secure online access to search, view, bookmark, track, and print documents according to the license agreement. Online documents are updated daily. Multiple users can share a single license. You also get access to IHS Standards bibliographic data – more than 1 Million documents.
Individual Documents - IHS sells individual documents through the IHS Standards Store in electronic or hardcopy formats. Statistics show that 1 out of every 5 people who purchase individual documents would benefit from an online subscription. You should consider a collection over individual document purchases if your company buys more than $3,000 in standards per year. |