| ASTM 00.01 | ANNUAL BOOK OF ASTM STANDARDS - SUBJECT INDEX; ALPHANUMERIC LIST |
| ASTM A 1 | Standard Specification for Carbon Steel Tee Rails |
| ASTM A 100 | Standard Specification for Ferrosilicon |
| ASTM A 1000 | Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality |
| ASTM A 1001 | Standard Specification for High Strength Steel Castings in Heavy Sections |
| ASTM A 1002 | Standard Specification for Castings, Nickel-Aluminum Ordered Alloy |
| ASTM A 1003/A 1003M | Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic- Coated for Cold-Formed Framing Members |
| ASTM A 1004/A 1004M | Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members |
| ASTM A 1005/A 1005M | Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded |
| ASTM A 1006/A 1006M | Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded |
| ASTM A 1007 | Standard Specification for Carbon Steel Wire for Wire Rope |
| ASTM A 1008/A 1008M REV B | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High- Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable |
| ASTM A 1009 | Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications |
| ASTM A 101 | Standard Specification for Ferrochromium |
| ASTM A 1010/A 1010M | Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip |
| ASTM A 1011/A 1011M REV A | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High- Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability |
| ASTM A 1012 | Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes with Integral Fins |
| ASTM A 1013 | Standard Test Method for High-Frequency (10 KHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter- Wattmeter Method |
| ASTM A 1014 | Standard Specification for Precipitation-Hardening Bolting Material (UNS N07718) for High Temperature Service |
| ASTM A 1015 | Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications |
| ASTM A 1016/A 1016M REV A | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes |
| ASTM A 1017/A 1017M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
| ASTM A 1018/A 1018M REV B | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot- Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, and High-Strength Low- Alloy with Improved Formability |
| ASTM A 1019/A 1019M | Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains |
| ASTM A 102 | Standard Specification for Ferrovanadium |
| ASTM A 1020/A 1020M | Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications |
| ASTM A 1021/A 1021M | Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service |
| ASTM A 1022 | Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement |
| ASTM A 1023/A 1023M | Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes |
| ASTM A 1024/A 1024M | Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless |
| ASTM A 1025 | Standard Specification for Ferroalloys and Other Alloying Materials, General Requirements |
| ASTM A 1026 | Standard Specification for Alloy Steel Structural Shapes for Use in Building Framing1 |
| ASTM A 1028 | Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils |
| ASTM A 1030/A 1030M | Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products |
| ASTM A 1031 | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled |
| ASTM A 1032 | Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe |
| ASTM A 1033 | Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations |
| ASTM A 1034/A 1034M REV B | Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars |
| ASTM A 1035/A 1035M | Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement |
| ASTM A 1036 | Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers |
| ASTM A 1037/A 1037M | Standard Specification for Steel Line Pipe, Black, Furnace-Butt- Welded |
| ASTM A 1038 | Standard Practice for Portable Hardness Testing by the Ultrasonic Contact Impedance Method |
| ASTM A 1039/A 1039M | Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial and Structural, Produced by the Twin-Roll Casting Process |
| ASTM A 1040 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels |
| ASTM A 1041/A 1041M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten |
| ASTM A 1042/A 1042M | Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains |
| ASTM A 1043/A 1043M | Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings |
| ASTM A 1044/A 1044M | Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete |
| ASTM A 1045 | Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Water Closets to Sanitary Drainage System |
| ASTM A 1047/A 1047M | Standard Test Method for Pneumatic Leak Testing of Tubing |
| ASTM A 105/A 105M | Standard Specification for Carbon Steel Forgings for Piping Applications |
| ASTM A 106/A 106M REV B | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service |
| ASTM A 108 | Standard Specification for Steel Bar, Carbon and Alloy, Cold- Finished |
| ASTM A 109/A 109M | Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled |
| ASTM A 111 REV A | Standard Specification for Zinc-Coated (Galvanized) Iron Telephone and Telegraph Line Wire |
| ASTM A 116 | Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric |
| ASTM A 121 | Standard Specification for Metallic-Coated Carbon Steel Barbed Wire |
| ASTM A 123/A 123M | Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
| ASTM A 125 | Standard Specification for Steel Springs, Helical, Heat-Treated |
| ASTM A 126 | Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings |
| ASTM A 128/A 128M | Standard Specification for Steel Castings, Austenitic Manganese |
| ASTM A 131/A 131M REV A | Standard Specification for Structural Steel for Ships |
| ASTM A 132 | Standard Specification for Ferromolybdenum |
| ASTM A 134 | Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and over) |
| ASTM A 135 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
| ASTM A 139/A 139M | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) |
| ASTM A 143/A 143M | Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement |
| ASTM A 144 | Standard Specification for Ferrotungsten |
| ASTM A 146 | Standard Specification for Molybdenum Oxide Products |
| ASTM A 148/A 148M | Standard Specification for Steel Castings, High Strength, for Structural Purposes |
| ASTM A 153/A 153M | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware-AASHTO No.: M232 |
| ASTM A 159 | Standard Specification for Automotive Gray Iron Castings |
| ASTM A 167 | Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
| ASTM A 176 | Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip |
| ASTM A 178/A 178M | Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes |
| ASTM A 179/A 179M REV A | Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat- Exchanger and Condenser Tubes |
| ASTM A 181/A 181M | Standard Specification for Carbon Steel Forgings, for General-Purpose Piping |
| ASTM A 182/A 182M REV A | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| ASTM A 183 | Standard Specification for Carbon Steel Track Bolts and Nuts |
| ASTM A 184/A 184M | Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement |
| ASTM A 185/A 185M REV A | Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete |
| ASTM A 192/A 192M | Standard Specification for Seamless Carbon Steel Boiler Tubes for High- Pressure Service |
| ASTM A 194/A 194M REV B | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
| ASTM A 2 | Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
| ASTM A 20/A 20M | Standard Specification for General Requirements for Steel Plates for Pressure Vessels |
| ASTM A 203/A 203M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel |
| ASTM A 204/A 204M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum |
| ASTM A 209/A 209M | Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes |
| ASTM A 210/A 210M | Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes |
| ASTM A 213/A 213M REV C | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
| ASTM A 214/A 214M | Standard Specification for Electric-Resistance-Welded Carbon Steel Heat- Exchanger and Condenser Tubes |
| ASTM A 216/A 216M | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service |
| ASTM A 217/A 217M | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
| ASTM A 220/A 220M | Standard Specification for Pearlitic Malleable Iron |
| ASTM A 225/A 225M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel |
| ASTM A 227/A 227M | Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs |
| ASTM A 228/A 228M | Standard Specification for Steel Wire, Music Spring Quality |
| ASTM A 229/A 229M | Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs |
| ASTM A 230/A 230M | Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality |
| ASTM A 231/A 231M | Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire |
| ASTM A 232/A 232M | Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire |
| ASTM A 234/A 234M REV A | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
| ASTM A 239 | Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles |
| ASTM A 240/A 240M REV A | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM A 242/A 242M | Standard Specification for High-Strength Low-Alloy Structural Steel- AASHTO No.: M 161 |
| ASTM A 247 | Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings |
| ASTM A 249/A 249M REV A | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat- Exchanger, and Condenser Tubes |
| ASTM A 250/A 250M | Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes |
| ASTM A 252 | Standard Specification for Welded and Seamless Steel Pipe Piles |
| ASTM A 254 | Standard Specification for Copper-Brazed Steel Tubing |
| ASTM A 255 | Standard Test Methods for Determining Hardenability of Steel |
| ASTM A 262 REV A | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| ASTM A 263 | Standard Specification for Stainless Chromium Steel-Clad Plate |
| ASTM A 264 | Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate |
| ASTM A 265 | Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate |
| ASTM A 266/A 266M REV A | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components |
| ASTM A 268/A 268M REV A | Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
| ASTM A 269 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
| ASTM A 27/A 27M | Standard Specification for Steel Castings, Carbon, for General Application |
| ASTM A 270 REV A | Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing |
| ASTM A 275/A 275M | Standard Test Method for Magnetic Particle Examination of Steel Forgings |
| ASTM A 276 REV A | Standard Specification for Stainless Steel Bars and Shapes |
| ASTM A 278/A 278M | Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650 Degrees F (350 Degrees C) |
| ASTM A 283/A 283M | Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates |
| ASTM A 285/A 285M | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength |
| ASTM A 288 | Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators |
| ASTM A 289/A 289M | Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators |
| ASTM A 29/A 29M | Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for |
| ASTM A 290/A 290M | Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears |
| ASTM A 291/A 291M | Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears |
| ASTM A 295/A 295M | Standard Specification for High-Carbon Anti-Friction Bearing Steel |
| ASTM A 297/A 297M | Standard Specification for Steel Castings, Iron-Chromium and Iron- Chromium-Nickel, Heat Resistant, for General Application |
| ASTM A 299/A 299M | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon |
| ASTM A 3 | Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated) |
| ASTM A 302/A 302M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
| ASTM A 304 | Standard Specification for Carbon and Alloy Steel Bars Subject to End- Quench Hardenability Requirements |
| ASTM A 307 | Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength |
| ASTM A 308/A 308M | Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process |
| ASTM A 309 | Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test |
| ASTM A 31 | Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels |
| ASTM A 311/A 311M | Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements |
| ASTM A 312/A 312M REV A | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| ASTM A 313/A 313M | Standard Specification for Stainless Steel Spring Wire |
| ASTM A 314 | Standard Specification for Stainless Steel Billets and Bars for Forging |
| ASTM A 319 | Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts |
| ASTM A 320/A 320M REV A | Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service |
| ASTM A 321 | Standard Specification for Steel Bars, Carbon, Quenched and Tempered |
| ASTM A 322 | Standard Specification for Steel Bars, Alloy, Standard Grades |
| ASTM A 323 | Standard Specification for Ferroboron |
| ASTM A 324 | Standard Specification for Ferrotitanium |
| ASTM A 325 REV B | Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength-AASHTO No.: M 164 |
| ASTM A 325M | Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric] |
| ASTM A 328/A 328M | Standard Specification for Steel Sheet Piling-AASHTO No.: M 202 |
| ASTM A 333/A 333M | Standard Specification for Seamless and Welded Steel Pipe for Low- Temperature Service |
| ASTM A 334/A 334M REV A | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service |
| ASTM A 335/A 335M REV A | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High- Temperature Service |
| ASTM A 336/A 336M | Standard Specification for Alloy Steel Forgings for Pressure and High- Temperature Parts |
| ASTM A 338 | Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures up to 650 Degrees F (345 Degrees C) |
| ASTM A 34/A 34M | Standard Practice for Sampling and Procurement Testing of Magnetic Materials |
| ASTM A 340 REV A | Standard Terminology of Symbols and Definitions Relating to Magnetic Testing |
| ASTM A 341/A 341M | Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods |
| ASTM A 342/A 342M | Standard Test Methods for Permeability of Feebly Magnetic Materials |
| ASTM A 343/A 343M | Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame |
| ASTM A 345 | Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications |
| ASTM A 348/A 348M | Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame |
| ASTM A 350/A 350M REV A | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components |
| ASTM A 351/A 351M | Standard Specification for Castings, Austenitic, for Pressure-Containing Parts |
| ASTM A 352/A 352M | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service |
| ASTM A 353/A 353M | Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered |
| ASTM A 354 | Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners |
| ASTM A 355 | Standard Specification for Steel Bars, Alloys, for Nitriding |
| ASTM A 356/A 356M | Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines |
| ASTM A 358/A 358M | Standard Specification for Electric-Fusion-Welded Austenitic Chromium- Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
| ASTM A 36/A 36M | Standard Specification for Carbon Structural Steel |
| ASTM A 363 | Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand |
| ASTM A 367 | Standard Test Methods of Chill Testing of Cast Iron |
| ASTM A 368 REV A | Standard Specification for Stainless Steel Wire Strand |
| ASTM A 369/A 369M | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service |
| ASTM A 370 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM A 372/A 372M | Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels |
| ASTM A 376/A 376M | Standard Specification for Seamless Austenitic Steel Pipe for High- Temperature Central-Station Service |
| ASTM A 377 | Standard Index of Specifications for Ductile-Iron Pressure Pipe |
| ASTM A 380 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| ASTM A 381 | Standard Specification for Metal-Arc-Welded Steel Pipe for Use with High- Pressure Transmission Systems |
| ASTM A 384/A 384M | Standard Practice for Safeguarding Against Warpage and Distortion During Hot- Dip Galvanizing of Steel Assemblies |
| ASTM A 385 | Standard Practice for Providing High-Quality Zinc Coatings (Hot- Dip) |
| ASTM A 387/A 387M REV A | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Molybdenum |
| ASTM A 388/A 388M | Standard Practice for Ultrasonic Examination of Heavy Steel Forgings |
| ASTM A 389/A 389M | Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service |
| ASTM A 390 | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) |
| ASTM A 391/A 391M | Standard Specification for Grade 80 Alloy Steel Chain |
| ASTM A 392 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
| ASTM A 394 | Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare |
| ASTM A 395/A 395M | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM A 400 | Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties |
| ASTM A 401/A 401M | Standard Specification for Steel Wire, Chromium-Silicon Alloy |
| ASTM A 403/A 403M | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
| ASTM A 407 | Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs |
| ASTM A 409/A 409M | Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
| ASTM A 411 | Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire |
| ASTM A 413/A 413M | Standard Specification for Carbon Steel Chain |
| ASTM A 414/A 414M | Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels |
| ASTM A 416/A 416M | Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete |
| ASTM A 417 | Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square- Formed, and Sinuous-Type Upholstery Spring Units |
| ASTM A 418/A 418M | Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings |
| ASTM A 420/A 420M | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
| ASTM A 421/A 421M | Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete-AASHTO No.: M 204 |
| ASTM A 423/A 423M | Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes |
| ASTM A 424 | Standard Specification for Steel, Sheet, for Porcelain Enameling |
| ASTM A 426/A 426M | Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service |
| ASTM A 427 | Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction |
| ASTM A 428/A 428M | Standard Test Method for Weight (Mass) of Coating on Aluminum-Coated Iron or Steel Articles |
| ASTM A 434 | Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered |
| ASTM A 435/A 435M | Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
| ASTM A 436 | Standard Specification for Austenitic Gray Iron Castings |
| ASTM A 437/A 437M | Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service |
| ASTM A 439 | Standard Specification for Austenitic Ductile Iron Castings |
| ASTM A 447/A 447M | Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25- 12 Class), for High-Temperature Service |
| ASTM A 449 REV B | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/ 105/90 ksi Minimum Tensile Strength, General Use |
| ASTM A 450/A 450M REV A | Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes |
| ASTM A 451/A 451M | Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High- Temperature Service |
| ASTM A 453/A 453M | Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels |
| ASTM A 455/A 455M | Standard Specification for Pressure Vessel Plates, Carbon Steel, High- Strength Manganese |
| ASTM A 456/A 456M | Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings |
| ASTM A 459 | Standard Specification for Zinc-Coated Flat Steel Armoring Tape |
| ASTM A 460 | Standard Specification for Copper-Clad Steel Wire Strand |
| ASTM A 463/A 463M | Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process |
| ASTM A 466/A 466M | Standard Specification for Weldless Chain |
| ASTM A 467/A 467M | Standard Specification for Machine and Coil Chain |
| ASTM A 469/A 469M | Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors |
| ASTM A 47/A 47M | Standard Specification for Ferritic Malleable Iron Castings |
| ASTM A 470/A 470M | Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts |
| ASTM A 471 | Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels |
| ASTM A 472/A 472M | Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings |
| ASTM A 473 | Standard Specification for Stainless Steel Forgings |
| ASTM A 474 | Standard Specification for Aluminum-Coated Steel Wire Strand |
| ASTM A 475 | Standard Specification for Zinc-Coated Steel Wire Strand |
| ASTM A 476/A 476M | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
| ASTM A 478 | Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
| ASTM A 479/A 479M REV A | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| ASTM A 48/A 48M | Standard Specification for Gray Iron Castings |
| ASTM A 480/A 480M | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| ASTM A 481 | Standard Specification for Chromium Metal |
| ASTM A 482 | Standard Specification for Ferrochrome-Silicon |
| ASTM A 483 | Standard Specification for Silicomanganese |
| ASTM A 484/A 484M REV A | Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings |
| ASTM A 485 | Standard Specification for High Hardenability Antifriction Bearing Steel |
| ASTM A 487/A 487M | Standard Specification for Steel Castings Suitable for Pressure Service |
| ASTM A 488/A 488M | Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel |
| ASTM A 489 | Standard Specification for Carbon Steel Lifting Eyes |
| ASTM A 49 | Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars |
| ASTM A 490 REV A | Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength-AASHTO No.: M 253 |
| ASTM A 490M REV A | Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] |
| ASTM A 491 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric |
| ASTM A 492 | Standard Specification for Stainless Steel Rope Wire |
| ASTM A 493 | Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
| ASTM A 494/A 494M | Standard Specification for Castings, Nickel and Nickel Alloy |
| ASTM A 495 | Standard Specification for Calcium-Silicon Alloys |
| ASTM A 496/A 496M | Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement |
| ASTM A 497/A 497M REV A | Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete |
| ASTM A 498 | Standard Specification for Seamless and Welded Carbon Steel Heat- Exchanger Tubes with Integral Fins |
| ASTM A 499 | Standard Specification for Steel Bars and Shapes, Carbon Rolled from T Rails |
| ASTM A 500 REV A | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ASTM A 501 | Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing |
| ASTM A 502 | Standard Specification for Rivets, Steel, Structural |
| ASTM A 503/A 503M | Standard Specification for Ultrasonic Examination of Forged Crankshafts |
| ASTM A 504/A 504M | Standard Specification for Wrought Carbon Steel Wheels |
| ASTM A 505 | Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold- Rolled, General Requirements for |
| ASTM A 506 | Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled |
| ASTM A 507 | Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled |
| ASTM A 508/A 508M REV B | Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels |
| ASTM A 510 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel |
| ASTM A 510M | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric] |
| ASTM A 511 | Standard Specification for Seamless Stainless Steel Mechanical Tubing |
| ASTM A 512 | Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing |
| ASTM A 513 | Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing |
| ASTM A 514/A 514M | Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding |
| ASTM A 515/A 515M | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
| ASTM A 516/A 516M | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
| ASTM A 517/A 517M | Standard Specification for Pressure Vessel Plates, Alloy Steel, High- Strength, Quenched and Tempered |
| ASTM A 518/A 518M | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
| ASTM A 519 | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
| ASTM A 521 | Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use |
| ASTM A 522/A 522M | Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service |
| ASTM A 523 | Standard Specification for Plain End Seamless and Electric-Resistance- Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
| ASTM A 524 | Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures |
| ASTM A 529/A 529M | Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality |
| ASTM A 53/A 53M | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM A 530/A 530M REV A | Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe |
| ASTM A 531/A 531M | Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings |
| ASTM A 532/A 532M REV A | Standard Specification for Abrasion-Resistant Cast Irons |
| ASTM A 533/A 533M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
| ASTM A 534 | Standard Specification for Carburizing Steels for Anti-Friction Bearings |
| ASTM A 536 | Standard Specification for Ductile Iron Castings |
| ASTM A 537/A 537M | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon- Manganese-Silicon Steel |
| ASTM A 540/A 540M | Standard Specification for Alloy-Steel Bolting Materials for Special Applications |
| ASTM A 541/A 541M | Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components |
| ASTM A 542/A 542M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched- And-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium |
| ASTM A 543/A 543M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum |
| ASTM A 550 | Standard Specification for Ferrocolumbium |