|
ASTM D 5363 |
Standard Specification for Anaerobic Single-Component Adhesives (AN) |
|
ASTM 00.01 |
ANNUAL BOOK OF ASTM STANDARDS - SUBJECT INDEX; ALPHANUMERIC LIST |
|
ASTM C 33 |
Standard Specification for Concrete Aggregates |
|
ASTM D 3951 |
Standard Practice for Commercial Packaging |
|
ASTM C 94/C 94M |
Standard Specification for Ready-Mixed Concrete |
|
ASTM C 150 |
Standard Specification for Portland Cement |
|
ASTM D 1002 |
Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
|
ASTM C 39/C 39M |
Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
|
ASTM C 31/C 31M |
Standard Practice for Making and Curing Concrete Test Specimens in the Field |
|
ASTM D 1557 |
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) |
|
ASTM E 84 |
Standard Test Method for Surface Burning Characteristics of Building Materials |
|
ASTM D 4169 |
Standard Practice for Performance Testing of Shipping Containers and Systems |
|
ASTM C 136 |
Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
|
ASTM C 109/C 109M |
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) |
|
ASTM C 143/C 143M REV A |
Standard Test Method for Slump of Hydraulic-Cement Concrete |
|
ASTM D 698 REV A |
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3)) |
|
ASTM C 76 |
Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe |
|
ASTM D 3330/D 3330M |
Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape |
|
ASTM D 422 |
Standard Test Method for Particle-Size Analysis of Soils |
|
ASTM E 119 |
Standard Test Methods for Fire Tests of Building Construction and Materials |
|
ASTM E 11 |
Standard Specification for Wire Cloth and Sieves for Testing Purposes |
|
ASTM C 494/C 494M REV A |
Standard Specification for Chemical Admixtures for Concrete |
|
ASTM C 618 |
Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
|
ASTM D 5118/D 5118M REV A |
Standard Practice for Fabrication of Fiberboard Shipping Boxes |
|
ASTM C 172 |
Standard Practice for Sampling Freshly Mixed Concrete |
|
ASTM E 176 |
Standard Terminology of Fire Standards |
|
ASTM C 1107/C 1107M |
Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink) |
|
ASTM D 4318 |
Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils |
|
ASTM C 90 REV B |
Standard Specification for Loadbearing Concrete Masonry Units |
|
ASTM E 96/E 96M |
Standard Test Methods for Water Vapor Transmission of Materials |
|
ASTM C 231 |
Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method |
|
ASTM D 903 |
Standard Test Method for Peel or Stripping Strength of Adhesive Bonds |
|
ASTM D 2488 |
Standard Practice for Description and Identification of Soils (Visual-Manual Procedure) |
|
ASTM D 1876 |
Standard Test Method for Peel Resistance of Adhesives (T-Peel Test) |
|
ASTM C 270 |
Standard Specification for Mortar for Unit Masonry |
|
ASTM C 128 |
Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate |
|
ASTM C 177 |
Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
|
ASTM C 127 |
Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate |
|
ASTM C 138/C 138M REV A |
Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete-AASHTO No.: T121 |
|
ASTM D 2922 |
Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth) |
|
ASTM D 5486/D 5486M |
Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing |
|
ASTM C 478 |
Standard Specification for Precast Reinforced Concrete Manhole Sections |
|
ASTM C 192/C 192M |
Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory |
|
ASTM D 5 |
Standard Test Method for Penetration of Bituminous Materials |
|
ASTM C 547 |
Standard Specification for Mineral Fiber Pipe Insulation |
|
ASTM C 533 |
Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation |
|
ASTM D 3953 |
Standard Specification for Strapping, Flat Steel and Seals |
|
ASTM D 1556 |
Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method |
|
ASTM C 117 |
Standard Test Method for Materials Finer than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing |
|
ASTM D 2216 |
Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
|
ASTM D 1586 |
Standard Test Method for Penetration Test and Split-Barrel Sampling of Soils |
|
ASTM C 920 |
Standard Specification for Elastomeric Joint Sealants |
|
ASTM C 518 |
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
|
ASTM C 114 |
Standard Test Methods for Chemical Analysis of Hydraulic Cement |
|
ASTM C 29/C 29M |
Standard Test Method for Bulk Density ( |
|
ASTM D 2651 |
Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding |
|
ASTM C 795 |
Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel |
|
ASTM C 1064/C 1064M |
Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete |
|
ASTM D 75 |
Standard Practice for Sampling Aggregates-AASHTO No. T2 |
|
ASTM D 4727/D 4727M |
Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
|
ASTM C 131 |
Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
|
ASTM C 595 |
Standard Specification for Blended Hydraulic Cements |
|
ASTM C 612 |
Standard Specification for Mineral Fiber Block and Board Thermal Insulation |
|
ASTM F 1980 |
Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices |
|
ASTM C 309 |
Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete |
|
ASTM D 1974 |
Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
|
ASTM C 1077 REV A |
Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation1 |
|
ASTM C 173/C 173M |
Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method-El: November 2001 |
|
ASTM C 125 |
Standard Terminology Relating to Concrete and Concrete Aggregates |
|
ASTM D 1781 |
Standard Test Method for Climbing Drum Peel for Adhesives |
|
ASTM C 78 |
Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) |
|
ASTM D 448 REV A |
Standard Classification for Sizes of Aggregate for Road and Bridge Construction |
|
ASTM C 680 |
Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs |
|
ASTM C 881/C 881M |
Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete |
|
ASTM C 1302 |
Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards |
|
ASTM C 1231/C 1231M |
Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders |
|
ASTM D 3279 |
Standard Test Method for n-Heptane Insolubles |
|
ASTM C 140 |
Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
|
ASTM D 6251/D 6251M |
Standard Specification for Wood-Cleated Panelboard Shipping Boxes |
|
ASTM C 578 |
Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation |
|
ASTM D 4253 |
Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
|
ASTM D 4956 |
Standard Specification for Retroreflective Sheeting for Traffic Control |
|
ASTM C 1260 REV A |
Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method) |
|
ASTM C 260 |
Standard Specification for Air-Entraining Admixtures for Concrete |
|
ASTM D 653 REV B |
Standard Terminology Relating to Soil, Rock, and Contained Fluids |
|
ASTM D 1883 |
Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils |
|
ASTM D 3933 |
Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing) |
|
ASTM C 311 |
Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete |
|
ASTM C 88 |
Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate |
|
ASTM D 70 |
Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method) |
|
ASTM D 3165 |
Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies |
|
ASTM D 3167 REV A |
Standard Test Method for Floating Roller Peel Resistance of Adhesives |
|
ASTM F 88 |
Standard Test Method for Seal Strength of Flexible Barrier Materials |
|
ASTM D 1143/D 1143M |
Standard Test Methods for Deep Foundations Under Static Axial Compressive Load |
|
ASTM D 854 |
Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer |
|
ASTM D 4254 |
Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density |
|
ASTM D 3528 |
Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
|
ASTM C 469 |
Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression |
|
ASTM C 403/C 403M |
Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance |
|
ASTM D 2166 |
Standard Test Method for Unconfined Compressive Strength of Cohesive Soil |
|
ASTM E 162 |
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
|
ASTM C 840 |
Standard Specification for Application and Finishing of Gypsum Board |
|
ASTM C 566 |
Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying |
|
ASTM E 1300 |
Standard Practice for Determining Load Resistance of Glass in Buildings |
|
ASTM D 36 |
Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) |
|
ASTM C 476 |
Standard Specification for Grout for Masonry |
|
ASTM C 1036 |
Standard Specification for Flat Glass |
|
ASTM D 3740 REV A |
Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
|
ASTM D 1751 |
Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types) |
|
ASTM C 67 |
Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
|
ASTM D 4791 |
Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate |
|
ASTM C 585 |
Standard Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing (NPS System) |
|
ASTM D 999 |
Standard Test Methods for Vibration Testing of Shipping Containers |
|
ASTM C 552 |
Standard Specification for Cellular Glass Thermal Insulation |
|
ASTM D 1084 |
Standard Test Methods for Viscosity of Adhesives |
|
ASTM D 420 |
Standard Guide to Site Characterization for Engineering Design and Construction Purposes |
|
ASTM C 157/C 157M |
Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete |
|
ASTM D 3163 |
Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading |
|
ASTM C 939 |
Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method) |
|
ASTM C 144 |
Standard Specification for Aggregate for Masonry Mortar-AASHTO No.: M45-70(1974) |
|
ASTM C 645 |
Standard Specification for Nonstructural Steel Framing Members |
|
ASTM C 617 |
Standard Practice for Capping Cylindrical Concrete Specimens |
|
ASTM E 136 |
Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750 Degrees C |
|
ASTM C 1161 REV C |
Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature |
|
ASTM D 2435 |
Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading |
|
ASTM C 989 |
Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars |
|
ASTM D 5656 |
Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading |
|
ASTM C 511 |
Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes |
|
ASTM C 1433 |
Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers |
|
ASTM D 2850 REV A |
Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils |
|
ASTM C 295 |
Standard Guide for Petrographic Examination of Aggregates for Concrete |
|
ASTM C 1202 |
Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration |
|
ASTM D 1587 |
Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes |
|
ASTM D 5084 |
Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
|
ASTM C 553 |
Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications |
|
ASTM D 1752 REV A |
Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction |
|
ASTM C 191 REV B |
Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle-AASHTO No.: T131 |
|
ASTM C 443 REV A |
Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets |
|
ASTM D 1140 |
Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-µm) Sieve1Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-µm) Sieve |
|
ASTM C 496/C 496M |
Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens |
|
ASTM D 88 |
Standard Test Method for Saybolt Viscosity-AASHTO No.: T72 |
|
ASTM E 814 |
Standard Test Method for Fire Tests of Through-Penetration Fire Stops |
|
ASTM C 702 |
Standard Practice for Reducing Samples of Aggregate to Testing Size-AASHTO T248 |
|
ASTM D 3762 |
Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test) |
|
ASTM C 305 |
Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency |
|
ASTM D 3080 |
Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions |
|
ASTM D 907 |
Standard Terminology of Adhesives |
|
ASTM C 330 |
Standard Specification for Lightweight Aggregates for Structural Concrete |
|
ASTM E 488 |
Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements |
|
ASTM C 805 |
Standard Test Method for Rebound Number of Hardened Concrete |
|
ASTM C 40 |
Standard Test Method for Organic Impurities in Fine Aggregates for Concrete-AASHTO No.: T21 |
|
ASTM D 5276 |
Standard Test Method for Drop Test of Loaded Containers by Free Fall |
|
ASTM D 4728 |
Standard Test Method for Random Vibration Testing of Shipping Containers |
|
ASTM D 3017 |
Standard Test Method for Water Content of Soil and Rock in Place by Nuclear Methods (Shallow Depth) |
|
ASTM C 579 |
Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes |
|
ASTM C 423 REV A |
Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method |
|
ASTM C 1116/C 1116M |
Standard Specification for Fiber-Reinforced Concrete |
|
ASTM D 6199 |
Standard Practice for Quality of Wood Members of Containers and Pallets |
|
ASTM D 897 |
Standard Test Method for Tensile Properties of Adhesive Bonds |
|
ASTM D 2419 |
Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
|
ASTM C 227 |
Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method) |
|
ASTM C 754 |
Standard Specification for Installation of Steel Framing Members to Receive Screw- Attached Gypsum Panel Products |
|
ASTM C 1602/C 1602M |
Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete |
|
ASTM C 450 |
Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging |
|
ASTM C 289 |
Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method) |
|
ASTM D 6880 |
Standard Specification for Wood Boxes |
|
ASTM C 168 REV A |
Standard Terminology Relating to Thermal Insulation |
|
ASTM C 592 |
Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type) |
|
ASTM E 662 |
Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials |
|
ASTM C 666/C 666M |
Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing |
|
ASTM D 996 |
Standard Terminology of Packaging and Distribution Environments |
|
ASTM D 4632 |
Standard Test Method for Grab Breaking Load and Elongation of Geotextiles |
|
ASTM D 140 |
Standard Practice for Sampling Bituminous Materials |
|
ASTM C 91 |
Standard Specification for Masonry Cement |
|
ASTM C 1074 |
Standard Practice for Estimating Concrete Strength by the Maturity Method |
|
ASTM D 244 |
Standard Test Methods and Practices for Emulsified Asphalts-AASHTO No.: T59 |
|
ASTM C 610 |
Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation |
|
ASTM C 591 |
Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation |
|
ASTM C 635 |
Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-In Panel Ceilings |
|
ASTM C 642 |
Standard Test Method for Density, Absorption, and Voids in Hardened Concrete |
|
ASTM D 5330/D 5330M |
Standard Specification for Pressure-Sensitive Tape for Packaging, Filament- Reinforced |
|
ASTM E 1155 |
Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers |
|
ASTM C 1019 |
Standard Test Method for Sampling and Testing Grout |
|
ASTM D 5821 |
Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
|
ASTM D 2113 |
Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation |
|
ASTM C 1611/C 1611M |
Standard Test Method for Slump Flow of Self-Consolidating Concrete |
|
ASTM C 25 |
Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime |
|
ASTM D 1241 |
Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses |
|
ASTM D 4945 |
Standard Test Method for High-Strain Dynamic Testing of Piles |
|
ASTM D 3282 |
Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes |
|
ASTM E 90 |
Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements |
|
ASTM E 283 |
Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen |
|
ASTM C 655 |
Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe |
|
ASTM D 4402 |
Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer |
|
ASTM C 827 REV A |
Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens from Cementitious Mixtures |
|
ASTM D 421 |
Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants |
|
ASTM D 4332 |
Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
|
ASTM D 2167 |
Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method |
|
ASTM C 1055 |
Standard Guide for Heated System Surface Conditions that Produce Contact Burn Injuries |
|
ASTM C 497 |
Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile |
|
ASTM C 215 |
Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens |
|
ASTM C 1240 |
Standard Specification for Silica Fume Used in Cementitious Mixtures |
|
ASTM D 4832 |
Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders |
|
ASTM C 1157 |
Standard Performance Specification for Hydraulic Cement |
|
ASTM D 2041 REV A |
Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures |
|
ASTM C 636/C 636M |
Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels |
|
ASTM E 330 |
Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference |
|
ASTM C 534 |
Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form |
|
ASTM D 2937 |
Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method |
|
ASTM C 597 |
Standard Test Method for Pulse Velocity Through Concrete |
|
ASTM C 670 |
Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials |
|
ASTM E 756 |
Standard Test Method for Measuring Vibration-Damping Properties of Materials |
|
ASTM D 4491 REV A |
Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
|
ASTM D 2171 |
Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer-IP Designation: 222/84 (89) |
|
ASTM C 457 |
Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete |
|
ASTM C 55 |
Standard Specification for Concrete Building Brick |
|
ASTM D 2974 REV A |
Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
|
ASTM D 3666 |
Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
|
ASTM D 6256/D 6256M |
Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases |
|
ASTM C 151 |
Standard Test Method for Autoclave Expansion of Portland Cement |
|
ASTM E 331 |
Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference |
|
ASTM D 2434 |
Standard Test Method for Permeability of Granular Soils (Constant Head) |
|
ASTM C 1193 REV A |
Standard Guide for Use of Joint Sealants |
|
ASTM D 4220 |
Standard Practices for Preserving and Transporting Soil Samples |
|
ASTM D 6123/D 6123M |
Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking |
|
ASTM C 857 |
Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures |
|
ASTM C 1017/C 1017M |
Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete |
|
ASTM E 108 REV A |
Standard Test Methods for Fire Tests of Roof Coverings |
|
ASTM F 1140 |
Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages for Medical Applications |
|
ASTM C 361 |
Standard Specification for Reinforced Concrete Low-Head Pressure Pipe |
|
ASTM C 882 |
Standard Test Method for Bond Strength of Epoxy-Resin Systems Used with Concrete by Slant Shear |
|
ASTM E 648 REV A |
Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source |
|
ASTM D 2726 REV A |
Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
|
ASTM D 2940 |
Standard Specification for Graded Aggregate Material for Bases or Subbases for Highways or Airports |
|
ASTM D 6690 REV A |
Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements |
|
ASTM C 531 |
Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes |
|
ASTM C 1218/C 1218M |
Standard Test Method for Water-Soluble Chloride in Mortar and Concrete |
|
ASTM C 1421 REV B |
Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature |
|
ASTM D 4896 |
Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results |
|
ASTM D 7012 |
Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures |
|
ASTM C 1396/C 1396M REV A |
Standard Specification for Gypsum Board |
|
ASTM E 1354 REV A |
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
|
ASTM C 1293 |
Standard Test Method for Determination of Length Change of Concrete Due to Alkali- Silica Reaction |
|
ASTM D 3166 |
Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal) |
|
ASTM D 5778 |
Standard Test Method for Performing Electronic Friction Cone and Piezocone Penetration Testing of Soils |
|
ASTM D 6913 |
Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
|
ASTM C 76M |
Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric] |
|
ASTM C 20 |
Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water |
|
ASTM C 567 REV A |
Standard Test Method for Determining Density of Structural Lightweight Concrete |
|
ASTM C 1045 |
Standard Practice for Calculating Thermal Transmission Properties under Steady-State Conditions |
|
ASTM D 4428/D 4428M |
Standard Test Methods for Crosshole Seismic Testing |
|
ASTM D 4767 |
Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils |
|
ASTM D 113 |
Standard Test Method for Ductility of Bituminous Materials-AASHTO No.: T51 |
|
ASTM C 856 |
Standard Practice for Petrographic Examination of Hardened Concrete |
|
ASTM D 4751 |
Standard Test Method for Determining Apparent Opening Size of a Geotextile |
|
ASTM D 642 |
Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads |
|
ASTM C 373 |
Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products |
|
ASTM C 1048 |
Standard Specification for Heat-Treated Flat Glass - Kind HS, Kind FT Coated and Uncoated Glass |
|
ASTM C 1234 |
Standard Practice for Preparation of Oils and Oily Waste Samples by High- Pressure, High-Temperature Digestion for Trace Element Determinations |
|
ASTM C 535 |
Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
|
ASTM C 900 |
Standard Test Method for Pullout Strength of Hardened Concrete |
|
ASTM D 3950 |
Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
|
ASTM D 4546 |
Standard Test Methods for One-Dimensional Swell or Settlement Potential of Cohesive Soils |
|
ASTM D 946 |
Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction |
|
ASTM D 3665 |
Standard Practice for Random Sampling of Construction Materials |
|
ASTM C 70 |
Standard Test Method for Surface Moisture in Fine Aggregate-AASHTO No.: T142 |
|
ASTM D 6179 |
Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates |
|
ASTM D 880 |
Standard Test Method for Impact Testing for Shipping Containers and Systems |
|
ASTM C 803/C 803M |
Standard Test Method for Penetration Resistance of Hardened Concrete |
|
ASTM D 3983 |
Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
|
ASTM D 4595 |
Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
|
ASTM C 700 |
Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated |
|
ASTM C 871 |
Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions |
|
ASTM D 4429 |
Standard Test Method for CBR (California Bearing Ratio) of Soils in Place-(Reinstated) |
|
ASTM C 1363 |
Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus |
|
ASTM D 2919 |
Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
|
ASTM C 165 |
Standard Test Method for Measuring Compressive Properties of Thermal Insulations |
|
ASTM D 3441 |
Standard Test Method for Mechanical Cone Penetration Tests of Soil |
|
ASTM C 204 |
Standard Test Method for Fineness of Hydraulic Cement by Air-Permeability Apparatus-AASHTO No.: T153 |
|
ASTM C 665 |
Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing |
|
ASTM D 5168 |
Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
|
ASTM E 413 |
Classification for Rating Sound Insulation |
|
ASTM C 171 |
Standard Specification for Sheet Materials for Curing Concrete |
|
ASTM C 800 |
Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type) |
|
ASTM D 226 |
Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing |
|
ASTM D 4718 |
Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
|
ASTM D 5868 |
Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
|
ASTM D 5882 |
Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations |
|
ASTM C 1172 |
Standard Specification for Laminated Architectural Flat Glass |
|
ASTM C 449/C 449M |
Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement |
|
ASTM D 5329 |
Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements |
|
ASTM E 605 |
Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
|
ASTM D 1037 REV A |
Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
|
ASTM D 3381 |
Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction |
|
ASTM C 1610/C 1610M REV A |
Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique |
|
ASTM D 8 |
Standard Terminology Relating to Materials for Roads and Pavements |
|
ASTM C 1609/C 1609M |
Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading |
|
ASTM C 794 |
Standard Test Method for Adhesion-In-Peel of Elastomeric Joint Sealants |
|
ASTM F 1886 |
Standard Test Method for Determining Integrity of Seals for Medical Packaging by Visual Inspection |
|
ASTM D 143 |
Standard Test Methods for Small Clear Specimens of Timber |