|
ASTM D 86 REV A |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure |
|
ASTM 00.01 |
ANNUAL BOOK OF ASTM STANDARDS - SUBJECT INDEX; ALPHANUMERIC LIST |
|
ASTM D 445 |
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)-Designation: D 445–06; British Standard 2000: Part 71:1990 |
|
ASTM D 975 REV A |
Standard Specification for Diesel Fuel Oils |
|
ASTM D 93 |
Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester |
|
ASTM D 4814 |
Standard Specification for Automotive Spark-Ignition Engine Fuel |
|
ASTM D 664 REV A |
Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration |
|
ASTM D 4052 |
Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter-X´A6´hNX´A6´hM IP Designation: 365/84(86) |
|
ASTM D 1298 |
Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method-API Designation: MPMS Chapter 9.1; IP Designation 160/99 |
|
ASTM D 4057 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
|
ASTM D 5191 |
Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
|
ASTM D 5453 |
Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence |
|
ASTM D 130 |
Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test-IP Designation: 154/93 |
|
ASTM D 97 |
Standard Test Method for Pour Point of Petroleum Products-IP Designation: 15/95 |
|
ASTM D 2887 REV A |
Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography-IP Designation: 406 |
|
ASTM D 6751 REV A |
Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels |
|
ASTM D 1250 |
Standard Guide for Use of the Petroleum Measurement Tables-API Standard: API MPMS Ch.11.1; IP Designation: 200/04 |
|
ASTM D 1319 |
Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption-IP Designation: 156/97 |
|
ASTM D 2700 REV A |
Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
|
ASTM D 2699 |
Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel |
|
ASTM D 381 |
Standard Test Method for Gum Content in Fuels by Jet Evaporation-IP Designation: 131/99 |
|
ASTM D 92 REV A |
Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester-IP Designation: 36/84 (89); AASHTO No.: T48; DIN 51 376 |
|
ASTM D 974 |
Standard Test Method for Acid and Base Number by Color-Indicator Titration-IP Designation: 139/98 |
|
ASTM D 3241 |
Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)-IP Designation: 323/99 |
|
ASTM D 4294 |
Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry |
|
ASTM D 95 |
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation-AASHTO No. T55; API Designation: MPMS Chapter 10.5; IP Designation: 74/82(88) |
|
ASTM D 2622 |
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
|
ASTM D 1500 REV A |
Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)-IP Designation: 196/97 |
|
ASTM D 976 |
Standard Test Method for Calculated Cetane Index of Distillate Fuels |
|
ASTM D 323 |
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) |
|
ASTM D 5452 |
Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration-IP Designation: 423/97 |
|
ASTM D 2624 REV A |
Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
|
ASTM D 2896 |
Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
|
ASTM D 4530 |
Standard Test Method for Determination of Carbon Residue (Micro Method) |
|
ASTM D 56 |
Standard Test Method for Flash Point by Tag Closed Cup Tester |
|
ASTM D 6304 REV A |
Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration |
|
ASTM D 892 |
Standard Test Method for Foaming Characteristics of Lubricating Oils-IP Designation: 146/2000; British Standard 5092 |
|
ASTM D 287 |
Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) |
|
ASTM D 396 |
Standard Specification for Fuel Oils |
|
ASTM D 482 |
Standard Test Method for Ash from Petroleum Products-IP Designation: 4/96 |
|
ASTM D 4176 |
Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
|
ASTM D 2276 |
Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling-IP Designation: 216/97 |
|
ASTM D 3227 REV A |
Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)-IP Designation 342/00 |
|
ASTM D 2500 |
Standard Test Method for Cloud Point of Petroleum Products-British Standard 4458; IP Designation: 219/82 |
|
ASTM D 4806 REV C |
Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel |
|
ASTM D 446 |
Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers |
|
ASTM D 1796 |
Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)-API Designation: MPMS Chapter 10.6 |
|
ASTM D 4737 |
Standard Test Method for Calculated Cetane Index by Four Variable Equation |
|
ASTM D 156 |
Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) |
|
ASTM D 4007 |
Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)-API Designation: Manual of Petroleum Measurement Standards (MPMS), Chapter 10.3 |
|
ASTM D 3230 |
Standard Test Method for Salts in Crude Oil (Electrometric Method) |
|
ASTM D 189 |
Standard Test Method for Conradson Carbon Residue of Petroleum Products-IP Designation: 13/94 |
|
ASTM D 3242 |
Standard Test Method for Acidity in Aviation Turbine Fuel-IP Designation: 354/98 |
|
ASTM D 473 |
Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method-API Designation: Chapter 10-1 (MPMS); IP Designation: 53/82 |
|
ASTM D 6299 |
Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance |
|
ASTM D 910 |
Standard Specification for Aviation Gasolines |
|
ASTM D 4951 |
Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry |
|
ASTM D 1401 |
Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
|
ASTM D 7039 |
Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry |
|
ASTM D 1160 |
Standard Test Method for Distillation of Petroleum Products at Reduced Pressure |
|
ASTM D 3948 |
Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer |
|
ASTM D 4952 |
Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test) |
|
ASTM D 2270 |
Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 and 100°C-IP Designation: 226/91 (95); British Standard 4459 |
|
ASTM D 5185 |
Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
|
ASTM D 3120 |
Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry |
|
ASTM D 3606 |
Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
|
ASTM D 2709 |
Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge |
|
ASTM D 4928 |
Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration-Designation: 386/99; Designation: Manual of Petroleum Measurement Standards (MPMS), Chapter 10.9 |
|
ASTM D 1322 |
Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel-IP Designation: 57/95 |
|
ASTM D 613 |
Standard Test Method for Cetane Number of Diesel Fuel Oil-IP Designation: 41/2000 |
|
ASTM D 1840 |
Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry |
|
ASTM D 341 |
Standard Test Method for Viscosity-Temperature Charts for Liquid Petroleum Products |
|
ASTM D 2386 |
Standard Test Method for Freezing Point of Aviation Fuels |
|
ASTM D 4629 |
Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection-IP Designation: 379/88 |
|
ASTM D 4177 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products-IP Designation: MPMS Chapter 8.2 |
|
ASTM D 2274 REV A |
Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)-IP Designation: 388/97 |
|
ASTM D 1250 ADJ V1 |
Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume I Table 5A - Generalized Crude Oils Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6A - Generalized Crude Oils Correction of Volume to 60 Degrees F Against API Gravity at 60 Degrees F-API Standard: API MPMS Ch.11.1; IP Designation: 200/80 (90); BSI Handbook; API Standard: 2540; IP Designation: 200; ISO/DIS91/1.2 |
|
ASTM D 240 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter |
|
ASTM D 5293 |
Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35 Degrees C Using the Cold-Cranking Simulator |
|
ASTM D 4377 |
Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration-API Designation: MPMS Chapter 10.7; IP Designation: 356/99 |
|
ASTM D 217 |
Standard Test Methods for Cone Penetration of Lubricating Grease-IP Designation: 50/88 |
|
ASTM D 611 |
Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents-IP Designation: 2/98 |
|
ASTM D 525 |
Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)-IP Designation: 40/97; British Standard 4347 |
|
ASTM D 1838 |
Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases |
|
ASTM D 665 |
Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water-IP Designation: 135/93 |
|
ASTM D 1094 |
Standard Test Method for Water Reaction of Aviation Fuels |
|
ASTM D 3338 |
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
|
ASTM D 6730 |
Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography |
|
ASTM D 3237 |
Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy |
|
ASTM D 6890 REV A |
Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber |
|
ASTM D 6584 |
Standard Test Method for Determination of Free and Total Glycerin in B-100 Biodiesel Methyl Esters By Gas Chromatography |
|
ASTM D 6079 |
Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) |
|
ASTM D 5949 |
Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) |
|
ASTM D 4870 |
Standard Test Method for Determination of Total Sediment in Residual Fuels |
|
ASTM D 5762 |
Standard Test Method for Nitrogen in Petroleum and Petroleum Products bY Boat-Inlet Chemiluminescence |
|
ASTM D 5863 REV A |
Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry |
|
ASTM D 5773 |
Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)-IP Designation: 446/99 |
|
ASTM D 5800 |
Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method |
|
ASTM D 4006 |
Standard Test Method for Water in Crude Oil by Distillation-API Designation: Chapter 10.2 (MPMS); IP Designation: IP 358/97 |
|
ASTM D 2892 |
Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column) |
|
ASTM D 5002 |
Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer |
|
ASTM D 4809 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
|
ASTM D 874 |
Standard Test Method for Sulfated Ash from Lubricating Oils and Additives-IP Designation: 163/96 |
|
ASTM D 5972 |
Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)-IP Designation: 435/98 |
|
ASTM D 1265 |
Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method |
|
ASTM D 6045 |
Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method |
|
ASTM D 5950 |
Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) |
|
ASTM D 2983 REV A |
Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer |
|
ASTM D 4739 REV A |
Standard Test Method for Base Number Determination by Potentiometric Titration |
|
ASTM D 5854 |
Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products-Designation: Manual of Petroleum Measurement Standards (MPMS), Chapter 8.3 |
|
ASTM D 2161 |
Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
|
ASTM D 6560 |
Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products-IP 143/01 |
|
ASTM D 6468 |
Standard Test Method for High Temperature Stability of Distillate Fuels |
|
ASTM D 5134 |
Standard Test Method for Detailed Analysis of Petroleum Naphthas Through n-Nonane by Capillary Gas Chromatography |
|
ASTM D 7169 |
Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography |
|
ASTM D 1218 |
Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids |
|
ASTM D 5842 |
Standard Practice for Sampling and Handling of Fuels for Volatility Measurement-API Designation: MPMS 8.4 |
|
ASTM D 2272 |
Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
|
ASTM D 4684 |
Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature |
|
ASTM D 5291 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants |
|
ASTM D 6217 |
Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration-IP Designation: 415/98 |
|
ASTM D 5580 |
Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m- Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography-Supersedes ASTM D 4420 |
|
ASTM D 2007 |
Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method |
|
ASTM D 1835 |
Standard Specification for Liquefied Petroleum (LP) Gases |
|
ASTM D 4929 |
Standard Test Methods for Determination of Organic Chloride Content in Crude Oil |
|
ASTM D 5798 |
Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines |
|
ASTM D 1945 |
Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
|
ASTM D 5184 |
Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry |
|
ASTM D 5186 |
Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography |
|
ASTM D 6667 |
Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence |
|
ASTM D 3427 |
Standard Test Method for Air Release Properties of Petroleum Oils-IP Designation 313-01 |
|
ASTM D 2158 |
Standard Test Method for Residues in Liquefied Petroleum (LP) Gases-IP Designation: 317/95 |
|
ASTM D 4485 |
Standard Specification for Performance of Engine Oils |
|
ASTM D 7042 |
Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity) |
|
ASTM D 3699 |
Standard Specification for Kerosine |
|
ASTM D 2420 |
Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method) |
|
ASTM D 3231 |
Standard Test Method for Phosphorus in Gasoline |
|
ASTM D 3710 |
Standard Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography |
|
ASTM D 94 |
Standard Test Methods for Saponification Number of Petroleum Products |
|
ASTM D 2598 |
Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis |
|
ASTM D 5708 |
Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry |
|
ASTM D 1250 ADJ V2 |
Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume II Table 5B - Generalized Products Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6B - Generalized Products Correction of Volume to 60 Degrees F Against API Gravity at 60 Degrees F-API Standard: API MPMS Ch.11.1; IP Designation: 200/80 (90); BSI Handbook; API Standard: 2540; IP Designation: 200; ISO/DIS91/1.2 |
|
ASTM D 2265 |
Standard Test Method for Dropping Point of Lubricating Grease over Wide Temperature Range |
|
ASTM D 2596 |
Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method) |
|
ASTM D 6378 |
Standard Test Method for Determination of Vapor Pressure (VPx) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method) |
|
ASTM D 1552 |
Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method) |
|
ASTM D 1250 ADJ V8 |
Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume VIII Table 53B - Generalized Products Correction of Observed Density to Density at 15 Degrees C Table 54B - Generalized Products Correction of Volume to 15 Degrees C Against Density at 15 Degrees C-API Standard: API MPMS Ch.11.1; IP Designation: 200/80 (90); BSI Handbook; API Standard: 2540; IP Designation: 200; ISO/DIS91/1.2 |
|
ASTM D 5599 |
Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection |
|
ASTM D 5443 |
Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 Degrees C by Multi-Dimensional Gas Chromatography |
|
ASTM D 6352 |
Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography |
|
ASTM D 5001 |
Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-On-Cylinder Lubricity Evaluator (BOCLE) |
|
ASTM D 6792 |
Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories |
|
ASTM D 1267 |
Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method) |
|
ASTM D 3244 |
Standard Practice for Utilization of Test Data to Determine Conformance with Specifications |
|
ASTM D 2710 |
Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration-IP Designation: 299/92 |
|
ASTM D 6293 |
Standard Test Method for Oxygenates and Paraffin, Olefin, Naphthene, Aromatic (O-PONA) Hydrocarbon Types in Low-Olefin Spark Ignition Engine Fuels by Gas Chromatography |
|
ASTM D 5307 |
Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography |
|
ASTM D 5705 |
Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils |
|
ASTM D 6839 |
Standard Test Method for Hydrcarbon Types, Oxygenated Compounds and Benzene in Spark Ignition Engine Fuels by Gas Chromatography |
|
ASTM D 87 |
Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve) |
|
ASTM D 1250 ADJ V11/12 |
Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Intraconversion between Volume Measures and Density Measures Volume XI/XII Volume XI - Tables 1, 2, 3, 4, 8, 9, 10, 11, 12, 13, and 14 Volume XII - Tables 21, 22, 26, 27, 28, 29, 30, 31, 33, 34, 51, 52, 56, 57 and 58-API Standard: API MPMS Ch.11.1; IP Designation: 200/80 (90); BSI Handbook; API Standard: 2540; IP Designation: 200; ISO/DIS91/1.2 |
|
ASTM D 4740 |
Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test |
|
ASTM D 893 REV A |
Standard Test Method for Insolubles In Used Lubricating Oils |
|
ASTM D 3828 |
Standard Test Methods for Flash Point by Small Scale Closed Cup Tester-IP Designation: 303/83 (88) |
|
ASTM D 5188 REV A |
Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method) |
|
ASTM D 3588 |
Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels |
|
ASTM D 5504 |
Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
|
ASTM D 1837 REV A |
Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases |
|
ASTM D 3764 |
Standard Practice for Validation of Process Stream Analyzers Systems |
|
ASTM D 4045 |
Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry |
|
ASTM D 4807 |
Standard Test Method for Sediment in Crude Oil by Membrane Filtration-Designation: Manual of Petroleum Measurement Standards (MPMS), Chapter 10.8 |
|
ASTM D 6371 |
Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels |
|
ASTM D 1250 ADJ V7 |
Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume VII Table 53A - Generalized Crude Oils Correction of Observed Density to Density at 15 Degrees C Table 54A - Generalized Crude Oils Correction of Volume to 15 Degrees C Against Density at 15 Degrees C-API Standard: MPMS Ch.11.1; IP Designation: 200/80 (90); BSI Handbook; API Standard: 2540; IP Designation: 200; ISO/DIS91/1.2 |
|
ASTM D 2784 |
Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) |
|
ASTM D 5501 |
Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography |
|
ASTM D 4953 |
Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method) |
|
ASTM D 4865 |
Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
|
ASTM D 2885 |
Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique |
|
ASTM D 4172 |
Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
|
ASTM D 2711 REV A |
Standard Test Method for Demulsibility Characteristics of Lubricating Oils |
|
ASTM D 4868 |
Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels |
|
ASTM D 943 REV A |
Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils-British Standard 4388 |
|
ASTM D 5771 |
Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)-IP Designation: 444/99 |
|
ASTM D 129 |
Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)-British Standard 4454; IP Designation: 61/99 |
|
ASTM D 1747 |
Standard Test Method for Refractive Index of Viscous Materials |
|
ASTM D 6729 |
Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Meter Capillary High Resolution Gas Chromatography |
|
ASTM D 873 |
Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)-IP Designation: 138/99; British Standard 4456 |
|
ASTM D 1266 |
Standard Test Method for Sulfur in Petroleum Products (Lamp Method)-IP Designation: 107/86 |
|
ASTM D 721 |
Standard Test Method for Oil Content of Petroleum Waxes-IP Designation: 158/69(85) |
|
ASTM D 2713 |
Standard Test Method for Dryness of Propane (Valve Freeze Method)-IP Designation: 395/98 |
|
ASTM D 4306 |
Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
|
ASTM D 5006 |
Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
|
ASTM D 6708 |
Standard Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material |
|
ASTM D 4175 |
Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants |
|
ASTM D 6591 |
Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle DistillatesHigh Performance Liquid Chromatography Method with Refractive Index Detection-IP Designation 548/06 |
|
ASTM D 2266 |
Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) |
|
ASTM D 942 |
Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method |
|
ASTM D 3700 |
Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder |
|
ASTM D 5845 |
Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy |
|
ASTM D 6082 |
Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils |
|
ASTM D 4529 |
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels-Designation: 381/97 |
|
ASTM D 2783 |
Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method) |
|
ASTM D 1250 ADJ V14 |
Standard Guide for Petroleum Measurement Tables Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume XIV Table 53D - Generalized Lubricating Oils Correction of Observed Density to Density at 15 Degrees C Table 54D - Generalized Lubricating Oils Correction of Volume to 15 Degrees C Against Density at 15 Degrees C-Errata - August 1, 1982; API Standard: API MPMS Ch.11.1; IP Designation: 200/80; BSI Handbook; API Standard 2540; IP 200 |
|
ASTM D 5985 |
Standard Test Method for Pour Point of Petroleum Products (Rotational Method) |
|
ASTM D 6300 |
Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
|
ASTM D 4308 |
Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter |
|
ASTM D 5059 |
Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy-IP Designation: 228/79; |
|
ASTM D 6443 |
Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-Ray Fluorescence Spectrometry (Mathematical Correction Procedure) |
|
ASTM D 3246 |
Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry |
|
ASTM D 7279 |
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer |
|
ASTM D 6377 |
Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method) |
|
ASTM D 1250 ADJ V10 |
Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume X - Background, Development, and Program Documentation-Editorial Amplification; API Standard: API MPMS Ch.11.1; IP Designation: 200/80 (90); BSI Handbook; API Standard: 2540; IP Designation: 200; ISO/DIS91/1.2 |
|
ASTM D 1093 |
Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues |
|
ASTM D 5769 |
Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry |
|
ASTM D 6379 |
Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates - High Performance Liquid Chromatography Method with Refractive Index Detection-IP Designation: 436/01 |
|
ASTM D 1748 |
Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet-IP Designation: 366/84 |
|
ASTM D 2504 |
Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography |
|
ASTM D 1250 ADJ V13 |
Standard Guide for Petroleum Measurement Tables Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume XIII Table 5D - Generalized Lubricating Oils Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6D - Generalized Lubricating Oils Correction of Volume to 60 Degrees F Against API Gravity at 60 Degrees F-API Standard: API MPMS Ch.11.1; IP Designation: 200/80 (90); BSI Handbook; API Standard 2540; IP 200 |
|
ASTM D 4927 |
Standard Test Methods for Elemental Analysis of Lubricant and Additive Components - Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy |
|
ASTM D 6550 |
Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography |
|
ASTM D 1264 |
Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases |
|
ASTM D 2533 |
Standard Test Method for Vapor-Liquid Ratio of Spark-Ignition Engine Fuels |
|
ASTM D 1142 |
Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature |
|
ASTM D 3605 |
Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy |
|
ASTM D 1946 |
Standard Practice for Analysis of Reformed Gas by Gas Chromatography |
|
ASTM D 2625 |
Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method) |
|
ASTM D 6122 |
Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers |
|
ASTM D 2421 |
Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis |
|
ASTM D 128 |
Standard Test Methods for Analysis of Lubricating Grease |
|
ASTM D 5236 |
Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method) |
|
ASTM D 972 |
Standard Test Method for Evaporation Loss of Lubricating Greases and Oils |
|
ASTM D 1743 REV A |
Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases |
|
ASTM D 3703 |
Standard Test Method for Peroxide Number of Aviation Turbine Fuels |
|
ASTM D 4898 |
Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis |
|
ASTM D 5853 |
Standard Test Method for Pour Point of Crude Oils-IP Designation: 441/99 |
|
ASTM D 4310 REV B |
Standard Test Method for Determination of the Sludging and Corrosion Tendencies of Inhibited Mineral Oils |
|
ASTM D 566 |
Standard Test Method for Dropping Point of Lubricating Grease-IP Designation: 132/97; British Standard 2877 |
|
ASTM D 3343 |
Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels |
|
ASTM D 2714 |
Standard Test Method for Calibration and Operation of the Falex Block-On-Ring Friction and Wear Testing Machine |
|
ASTM D 4055 |
Standard Test Method for Pentane Insolubles by Membrane Filtration |
|
ASTM D 1657 |
Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer |
|
ASTM C 871 |
Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions |
|
ASTM D 2880 |
Standard Specification for Gas Turbine Fuel Oils |
|
ASTM D 2273 |
Standard Test Method for Trace Sediment in Lubricating Oils |
|
ASTM D 1742 |
Standard Test Method for Oil Separation from Lubricating Grease During Storage |
|
ASTM D 6469 |
Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
|
ASTM D 938 |
Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum-IP Designation: 76/70(95); British Standard 5088 |
|
ASTM D 6615 |
Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
|
ASTM D 3175 |
Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke |
|
ASTM D 5190 |
Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method) |
|
ASTM D 808 |
Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method) |
|
ASTM D 2712 |
Standard Test Method for Hydrocarbon Traces in Propylene Concentrates by Gas Chromatography |
|
ASTM D 1250 ADJ V4 |
Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume IV Table 23A - Generalized Crude Oils Correction of Observed Relative Density to Relative Density 60/60 Degrees F Table 24A - Generalized Crude Oils Correction of Volume to 60 Degrees F Against Relative Density 60/60 Degrees F-API Standard: API MPMS Ch.11.1; IP Designation: 200/80 (90); BSI Handbook; API Standard: 2540; IP Designation: 200; ISO/DIS91/1.2 |
|
ASTM D 127 |
Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum-IP Designation: 133/79(87); TAPPI T 634ts-64 |
|
ASTM D 2068 |
Standard Test Method for Filter Plugging Tendency of Distillate Fuel Oils |
|
ASTM D 4378 |
Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines |
|
ASTM D 5772 |
Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)-IP Designation: IP 445/99 |
|
ASTM D 7061 |
Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device |
|
ASTM D 7096 |
Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography |
|
ASTM D 7111 |
Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
|
ASTM D 1403 |
Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment-IP Designation: 310/84(92) |
|
ASTM D 2889 |
Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels |
|
ASTM D 6470 |
Standard Test Method for Salt in Crude Oils (Potentiometric Method) |
|
ASTM D 4683 |
Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator |
|
ASTM D 7097 REV A |
Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT |
|
ASTM D 91 |
Standard Test Method for Precipitation Number of Lubricating Oils |
|
ASTM D 4625 |
Standard Test Method for Middle Distillate Fuel Storage Stability at 43 Degrees C (110 Degrees F)-IP Designation: 378/87 |
|
ASTM D 6423 |
Standard Test Method for Determination of pH of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85) |
|
ASTM D 3701 |
Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry-IP Designation: 338/98 |
|
ASTM D 187 |
Standard Test Method for Burning Quality of Kerosine |
|
ASTM D 3228 |
Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method |
|
ASTM D 4048 |
Standard Test Method for Detection of Copper Corrosion from Lubricating Grease |
|
ASTM D 7153 |
Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)-IP 529 |
|
ASTM D 5304 |
Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure |
|
ASTM D 1250 ADJ V5 |
Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume V Table 23B - Generalized Products Correction of Observed Relative Density to Relative Density 60/60 Degrees F Table 24B - Generalized Products Corrrection of Volume to 60 Degrees F Against Relative Density 60/60 Degrees F-API Standard: API MPMS Ch.11.1; IP Designation: 200/80 (90); BSI Handbook; API Standard: 2540; IP Designation: 200; ISO/DIS91/1.2 |
|
ASTM D 6733 |
Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50 Meter Capillary High Resolution Gas Chromatography |
|
ASTM D 6450 |
Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester |
|
ASTM D 1831 |
Standard Test Method for Roll Stability of Lubricating Grease |
|
ASTM D 2879 |
Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope |
|
ASTM D 7170 REV A |
Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel OilsFixed Range Injection Period, Constant Volume Combustion Chamber Method |
|
ASTM D 2162 |
Standard Test Method for Basic Calibration of Master Viscometers and Viscosity Oil Standards |
|
ASTM D 3238 |
Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method |
|
ASTM D 5441 |
Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography |
|
ASTM D 5133 |
Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique |
|
ASTM D 7303 |
Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry |
|
ASTM D 2509 |
Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)-IP Designation: 326/83(88) |
|
ASTM D 1478 |
Standard Test Method for Low-Temperature Torque of Ball Bearing Grease |
|
ASTM D 2505 |
Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography |
|
ASTM D 1217 |
Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer |
|
ASTM D 1250 ADJ V9 |
Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume IX Table 54C - Volume Correction Factors for Individual and Special Applications Volume Correction to 15 Degrees C Against Thermal Expansion Coefficients at 15 Degrees C-Addendum - January 1995; API Standard: MPMS Ch.11.1; IP Designation: 200/80 (90); BSI Handbook; API Standard: 2540; IP Designation: 200; ISO/DIS91/1.2 |
|
ASTM D 3172 |
Standard Practice for Proximate Analysis of Coal and Coke |
|
ASTM D 3831 |
Standard Test Method for Manganese in Gasoline by Atomic Absorption Spectroscopy |
|
ASTM D 4304 REV A |
Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines |
|
ASTM D 2893 |
Standard Test Methods for Oxidation Characteristics of Extreme-Pressure Lubrication Oils |
|
ASTM D 3235 |
Standard Test Method for Solvent Extractables in Petroleum Waxes |
|
ASTM D 2422 |
Standard Classification of Industrial Fluid Lubricants by Viscosity System |
|
ASTM D 7112 REV A |
Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection) |
|
ASTM D 7328 |
Standard Test Method for Determination of Total and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection |
|
ASTM D 3240 |
Standard Test Method for Undissolved Water in Aviation Turbine Fuels |
|
ASTM D 4289 |
Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids |