|
ASTM 00.01 |
ANNUAL BOOK OF ASTM STANDARDS - SUBJECT INDEX; ALPHANUMERIC LIST |
|
ASTM E 29 REV B |
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
|
ASTM D 3039/D 3039M |
Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials |
|
ASTM E 595 |
Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
|
ASTM D 2344/D 2344M |
Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates |
|
ASTM C 297/C 297M |
Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions |
|
ASTM E 11 |
Standard Specification for Wire Cloth and Sieves for Testing Purposes |
|
ASTM C 393/C 393M |
Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure |
|
ASTM F 519 |
Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments |
|
ASTM C 273/C 273M |
Standard Test Method for Shear Properties of Sandwich Core Materials |
|
ASTM D 4762 |
Standard Guide for Testing Polymer Matrix Composite Materials |
|
ASTM D 1238 REV C |
Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
|
ASTM D 3171 |
Standard Test Methods for Constituent Content of Composite Materials |
|
ASTM E 1 |
Standard Specification for ASTM Liquid-in-Glass Thermometers |
|
ASTM E 230 |
Standard Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples |
|
ASTM D 570 |
Standard Test Method for Water Absorption of Plastics |
|
ASTM SI 10 |
American National Standard for Use of the International System of Units (SI): The Modern Metric System-Revision IEEE/ASTM SI 10-1997 |
|
ASTM E 329 |
Standard Specification for Agencies Engaged in Construction Inspection and/or Testing |
|
ASTM D 3518/D 3518M |
Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate |
|
ASTM E 178 |
Standard Practice for Dealing with Outlying Observations |
|
ASTM E 2016 |
Standard Specification for Industrial Woven Wire Cloth |
|
ASTM D 3410/D 3410M |
Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading |
|
ASTM D 5961/D 5961M |
Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates |
|
ASTM E 691 |
Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
|
ASTM E 77 |
Standard Test Method for Inspection and Verification of Thermometers |
|
ASTM D 2244 |
Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
|
ASTM E 177 REV B |
Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
|
ASTM F 963 |
Standard Consumer Safety Specification for Toy Safety |
|
ASTM D 5379/D 5379M |
Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method |
|
ASTM D 6641/D 6641M |
Standard Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminates Using a Combined Loading Compression (CLC) Test Fixture |
|
ASTM G 21 |
Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
|
ASTM F 2413 |
Standard Specification for Performance Requirements for Foot Protection |
|
ASTM E 456 |
Standard Terminology Relating to Quality and Statistics |
|
ASTM F 326 |
Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes |
|
ASTM G 93 |
Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments |
|
ASTM G 155 REV A |
Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
|
ASTM D 5229/D 5229M |
Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials |
|
ASTM E 228 |
Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer |
|
ASTM E 220 |
Standard Test Method for Calibration of Thermocouples By Comparison Techniques |
|
ASTM G 88 |
Standard Guide for Designing Systems for Oxygen Service |
|
ASTM E 831 |
Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis |
|
ASTM G 154 |
Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials |
|
ASTM C 365/C 365M |
Standard Test Method for Flatwise Compressive Properties of Sandwich Cores |
|
ASTM D 3776 |
Standard Test Method for Mass Per Unit Area (Weight) of Fabric |
|
ASTM F 2412 |
Standard Test Methods for Foot Protection |
|
ASTM D 6484/D 6484M |
Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates |
|
ASTM E 1640 |
Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis |
|
ASTM F 136 REV A |
Standard Specification for Wrought Titanium - 6Aluminum - 4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
|
ASTM E 122 |
Standard Practice for Calculating Sample Size to Estimate, with a Specified Tolerable Error, the Average for a Characteristic of a Lot or Process |
|
ASTM F 22 |
Standard Test Method for Hydrophobic Surface Films by the Water-Break Test |
|
ASTM D 1729 |
Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
|
ASTM D 5528 |
Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
|
ASTM E 100 |
Standard Specification for ASTM Hydrometers |
|
ASTM E 1545 |
Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis |
|
ASTM E 308 |
Standard Practice for Computing the Colors of Objects by Using the CIE System |
|
ASTM D 5766/D 5766M REV A |
Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates |
|
ASTM G 151 |
Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices That Use Laboratory Light Sources |
|
ASTM E 1269 |
Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry |
|
ASTM D 7137/D 7137M |
Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates |
|
ASTM D 7136/D 7136M |
Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event |
|
ASTM G 63 |
Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service |
|
ASTM G 94 |
Standard Guide for Evaluating Metals for Oxygen Service |
|
ASTM D 1535 |
Standard Practice for Specifying Color by the Munsell System |
|
ASTM E 126 REV A |
Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers |
|
ASTM D 3479/D 3479M |
Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials |
|
ASTM D 3529/D 3529M |
Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg |
|
ASTM D 6415/D 6415M REV A |
Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite |
|
ASTM F 312 |
Standard Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters |
|
ASTM D 4255/D 4255M |
Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method |
|
ASTM F 2248 |
Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass |
|
ASTM E 1461 |
Standard Test Method for Thermal Diffusivity by the Flash Method |
|
ASTM E 1548 |
Standard Practice for Preparation of Aerospace Contamination Control Plans |
|
ASTM F 899 |
Standard Specification for Wrought Stainless Steels for Surgical Instruments |
|
ASTM E 1356 |
Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry |
|
ASTM C 364/C 364M |
Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions |
|
ASTM E 617 |
Standard Specification for Laboratory Weights and Precision Mass Standards |
|
ASTM D 3532 |
Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg |
|
ASTM D 7249/D 7249M |
Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure |
|
ASTM F 1624 |
Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique |
|
ASTM F 67 |
Standard Specification for Unalloyed Titanium for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
|
ASTM E 168 |
Standard Practices for General Techniques of Infrared Quantitative Analysis |
|
ASTM E 1252 |
Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis |
|
ASTM D 3531 |
Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg |
|
ASTM E 542 |
Standard Practice for Calibration of Laboratory Volumetric Apparatus |
|
ASTM E 185 |
Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels |
|
ASTM C 271/C 271M |
Standard Test Method for Density of Sandwich Core Materials |
|
ASTM D 1748 |
Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet-IP Designation: 366/84 |
|
ASTM E 1559 |
Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials |
|
ASTM E 659 |
Standard Test Method for Autoignition Temperature of Liquid Chemicals |
|
ASTM D 3530/D 3530M |
Standard Test Method for Volatiles Content of Composite Material Prepreg |
|
ASTM D 5467/D 5467M |
Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam |
|
ASTM F 483 |
Standard Test Method for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals |
|
ASTM D 6742/D 6742M |
Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates |
|
ASTM F 1110 |
Standard Test Method for Sandwich Corrosion Test |
|
ASTM D 6671/D 6671M |
Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites |
|
ASTM D 7078/D 7078M |
Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method |
|
ASTM E 145 |
Standard Specification for Gravity-Convection and Forced-Ventilation Ovens |
|
ASTM E 2042 |
Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms |
|
ASTM F 945 |
Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials |
|
ASTM E 235 |
Standard Specification for Thermocouples, Sheathed, Type K and Type N, for Nuclear or for Other High-Reliability Applications |
|
ASTM F 75 |
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075) |
|
ASTM E 1131 |
Standard Test Method for Compositional Analysis by Thermogravimetry |
|
ASTM F 25 |
Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas |
|
ASTM E 275 |
Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers |
|
ASTM E 284 REV B |
Standard Terminology of Appearance |
|
ASTM D 7250/D 7250M |
Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness |
|
ASTM F 2129 |
Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
|
ASTM E 1137/E 1137M |
Standard Specification for Industrial Platinum Resistance Thermometers |
|
ASTM F 138 |
Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673) |
|
ASTM G 128 |
Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems |
|
ASTM E 1578 |
Standard Guide for Laboratory Information Management Systems (LIMS) |
|
ASTM F 1472 REV A |
Standard Specification for Wrought Titanium-6Aluminum- 4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
|
ASTM F 548 REV A |
Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics |
|
ASTM D 5687/D 5687M |
Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation |
|
ASTM F 320 |
Standard Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures |
|
ASTM G 153 |
Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
|
ASTM E 105 |
Standard Practice for Probability Sampling of Materials |
|
ASTM D 3878 |
Standard Terminology for Composite Materials |
|
ASTM D 1331 |
Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents |
|
ASTM D 2512 |
Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques) |
|
ASTM E 1225 |
Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique |
|
ASTM E 323 |
Standard Specification for Perforated-Plate Sieves for Testing Purposes |
|
ASTM E 644 |
Standard Test Methods for Testing Industrial Resistance Thermometers |
|
ASTM E 794 |
Standard Test Method for Melting and Crystallization Temperatures by Thermal Analysis |
|
ASTM E 288 |
Standard Specification for Laboratory Glass Volumetric Flasks |
|
ASTM F 307 |
Standard Practice for Sampling Pressurized Gas for Gas Analysis |
|
ASTM E 289 |
Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry |
|
ASTM D 2573 |
Standard Test Method for Field Vane Shear Test in Cohesive Soil |
|
ASTM E 408 |
Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques |
|
ASTM F 1642 |
Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings |
|
ASTM F 2063 |
Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants |
|
ASTM E 355 |
Standard Practice for Gas Chromatography Terms and Relationships |
|
ASTM E 490 REV A |
Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables |
|
ASTM C 613/C 613M |
Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction |
|
ASTM E 2131 |
Standard Practice for Assessing Loss, Damage, or Destruction of Property |
|
ASTM F 50 |
Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles |
|
ASTM G 152 |
Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
|
ASTM C 366/C 366M |
Standard Test Methods for Measurement of Thickness of Sandwich Cores |
|
ASTM F 86 |
Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants |
|
ASTM E 1952 |
Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry |
|
ASTM E 2132 |
Standard Practice for Physical Inventory of Durable, Moveable Property |
|
ASTM E 1530 |
Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique |
|
ASTM E 438 |
Standard Specification for Glasses in Laboratory Apparatus |
|
ASTM D 7205/D 7205M |
Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars |
|
ASTM F 1487 REV A |
Standard Consumer Safety Performance Specification for Playground Equipment for Public Use |
|
ASTM E 967 |
Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers |
|
ASTM E 1272 |
Standard Specification for Laboratory Glass Graduated Cylinders |
|
ASTM F 748 |
Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices |
|
ASTM E 1142 |
Standard Terminology Relating to Thermophysical Properties |
|
ASTM E 171 |
Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials |
|
ASTM E 260 |
Standard Practice for Packed Column Gas Chromatography |
|
ASTM C 272 |
Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions |
|
ASTM E 344 |
Terminology Relating to Thermometry and Hydrometry |
|
ASTM E 969 |
Standard Specification for Glass Volumetric (Transfer) Pipets |
|
ASTM E 1421 |
Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests |
|
ASTM F 2081 |
Standard Guide for Characterization and Presentation of the Dimensional Attributes of Vascular Stents |
|
ASTM F 2501 |
Standard Practices for Unmanned Aircraft System Airworthiness |
|
ASTM E 2217 |
Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
|
ASTM E 2135 |
Standard Terminology for Property and Asset Management |
|
ASTM E 2282 |
Standard Guide for Defining the Test Result of a Test Method |
|
ASTM F 543 |
Standard Specification and Test Methods for Metallic Medical Bone Screws |
|
ASTM E 1953 |
Standard Practice for Description of Thermal Analysis Apparatus and Rheology Apparatus |
|
ASTM F 1637 |
Standard Practice for Safe Walking Surfaces |
|
ASTM F 330 |
Standard Test Method for Bird Impact Testing of Aerospace Transparent Enclosures |
|
ASTM F 451 REV A |
Standard Specification for Acrylic Bone Cement |
|
ASTM G 90 |
Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight |
|
ASTM F 2111 REV A |
Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes |
|
ASTM C 363 |
Standard Test Method for Delamination Strength of Honeycomb Core Materials |
|
ASTM F 1314 |
Standard Specification for Wrought Nitrogen Strengthened 22 Chromium – 13 Nickel – 5 Manganese – 2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) |
|
ASTM F 739 REV A |
Standard Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases under Conditions of Continuous Contact |
|
ASTM F 311 |
Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters |
|
ASTM F 90 |
Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605) |
|
ASTM D 4018 |
Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows |
|
ASTM D 6873 |
Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates |
|
ASTM E 1301 |
Standard Guide for Proficiency Testing by Interlaboratory Comparisons |
|
ASTM F 640 |
Standard Test Methods for Radiopacity of Plastics for Medical Use |
|
ASTM E 473 REV A |
Standard Terminology Relating to Thermal Analysis and Rheology |
|
ASTM F 2052 |
Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment |
|
ASTM F 502 |
Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces |
|
ASTM F 382 |
Standard Specification and Test Method for Metallic Bone Plates |
|
ASTM F 1978 |
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
|
ASTM C 394 |
Standard Test Method for Shear Fatigue of Sandwich Core Materials |
|
ASTM E 694 |
Standard Specification for Laboratory Glass Volumetric Apparatus |
|
ASTM F 2411 |
Standard Specification for Design and Performance of an Airborne Sense-and-Avoid System |
|
ASTM D 7264/D 7264M |
Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials |
|
ASTM E 1655 |
Standard Practices for Infrared Multivariate Quantitative Analysis |
|
ASTM E 681 |
Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases) |
|
ASTM F 21 |
Standard Test Method for Hydrophobic Surface Films by the Atomizer Test |
|
ASTM D 7291/D 7291M |
Standard Test Method for Through-Thickness “Flatwise†Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material |
|
ASTM E 207 |
Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties |
|
ASTM E 698 |
Standard Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method |
|
ASTM E 898 |
Standard Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances |
|
ASTM F 1346 |
Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs |
|
ASTM F 1459 |
Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE) |
|
ASTM D 501 |
Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents |
|
ASTM E 1549 |
Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
|
ASTM E 594 |
Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography |
|
ASTM F 303 |
Standard Practices for Sampling Aerospace Fluids from Components |
|
ASTM F 648 |
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants |
|
ASTM E 1434 |
Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases |
|
ASTM E 2221 |
Standard Practice for Administrative Control of Property |
|
ASTM F 2594 |
Standard Guide for Unmanned Undersea Vehicle (UUV) Communications |
|
ASTM D 6416/D 6416M |
Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load |
|
ASTM E 128 |
Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use |
|
ASTM E 1488 |
Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
|
ASTM E 2279 |
Standard Practice for Establishing the Guiding Principles of Property Management |
|
ASTM F 1264 |
Standard Specification and Test Methods for Intramedullary Fixation Devices |
|
ASTM D 2047 |
Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine |
|
ASTM E 1164 |
Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
|
ASTM F 1148 |
Standard Consumer Safety Performance Specification for Home Playground Equipment |
|
ASTM F 1537 |
Standard Specification for Wrought Cobalt - 28Chromium - 6Molybdenum Alloys for Surgical Implants (UNS R31538, and UNS R31539) |
|
ASTM C 274 |
Standard Terminology of Structural Sandwich Constructions |
|
ASTM D 6264 |
Standard Test Method for Measuring Damage Resistance of Fiber-Reinforced Polymer-Matrix Composite to Concentrated Quasi-Static Indentation Force |
|
ASTM F 883 |
Standard Performance Specification for Padlocks |
|
ASTM F 150 |
Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring |
|
ASTM G 7 |
Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials |
|
ASTM E 1235 |
Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
|
ASTM E 968 |
Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters |
|
ASTM F 746 |
Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials |
|
ASTM E 1234 |
Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
|
ASTM E 141 |
Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling |
|
ASTM E 2030 |
Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings |
|
ASTM F 1066 |
Standard Specification for Vinyl Composition Floor Tile |
|
ASTM F 310 |
Standard Practice for Sampling Cryogenic Aerospace Fluids |
|
ASTM F 562 |
Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035) |
|
ASTM D 6115 |
Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
|
ASTM E 2495 |
Standard Practice for Prioritizing Asset Resources in Acquisition, Utilization, and Disposition |
|
ASTM D 2024 |
Standard Test Method for Cloud Point of Nonionic Surfactants |
|
ASTM E 633 |
Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800 Degrees F (1000 Degrees C) in Air |
|
ASTM F 1295 |
Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
|
ASTM F 2026 |
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
|
ASTM E 2066 |
Standard Guide for Validation of Laboratory Information Management Systems |
|
ASTM E 2234 |
Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL |
|
ASTM F 1671 |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
|
ASTM G 113 |
Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials |
|
ASTM E 682 |
Standard Practice for Liquid Chromatography Terms and Relationships |
|
ASTM F 484 |
Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds |
|
ASTM G 173 |
Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface |
|
ASTM E 1641 |
Standard Test Method for Decomposition Kinetics by Thermogravimetry |
|
ASTM F 791 |
Standard Test Method for Stress Crazing of Transparent Plastics |
|
ASTM E 502 |
Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods |
|
ASTM F 2004 |
Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
|
ASTM E 131 |
Standard Terminology Relating to Molecular Spectroscopy |
|
ASTM E 161 |
Standard Specification for Precision Electroformed Sieves |
|
ASTM G 127 |
Standard Guide for the Selection of Cleaning Agents for Oxygen Systems |
|
ASTM E 585/E 585M |
Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable |
|
ASTM F 1868 |
Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate |
|
ASTM G 72 |
Standard Test Method for Autogenous Ignition Temperature of Liquids and Soilds in a High-Pressure Oxygen-Enriched Environment |
|
ASTM E 793 |
Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry |
|
ASTM E 1325 |
Standard Terminology Relating to Design of Experiments |
|
ASTM F 1160 |
Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/ Metallic Coatings |
|
ASTM F 852 |
Standard Specification for Portable Gasoline Containers for Consumer Use |
|
ASTM E 123 |
Standard Specification for Apparatus for Determination of Water by Distillation |
|
ASTM E 1582 |
Standard Practice for Calibration of Temperature Scale for Thermogravimetry |
|
ASTM E 169 |
Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis |
|
ASTM F 428 REV A |
Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures |
|
ASTM E 516 REV A |
Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography |
|
ASTM D 5448/D 5448M |
Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders |
|
ASTM E 1309 |
Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases |
|
ASTM A 627 |
Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities |
|
ASTM C 1118 |
Standard Guide for Selecting Components for Wavelength-Dispersive X-Ray Fluorescence (XRF) Systems |
|
ASTM E 133 |
Standard Specification for Distillation Equipment |
|
ASTM E 2352 |
Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations |
|
ASTM E 2452 |
Standard Practice for Equipment Management Process Maturity (EMPM) Model |
|
ASTM E 287 |
Standard Specification for Laboratory Glass Graduated Burets |
|
ASTM F 1044 |
Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings |
|
ASTM E 678 |
Standard Practice for Evaluation of Scientific or Technical Data |
|
ASTM F 1185 |
Standard Specification for Composition of Hydroxylapatite for Surgical Implants |
|
ASTM F 1930 |
Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Flash Fire Simulations Using an Instrumented Manikin |
|
ASTM F 24 |
Standard Method for Measuring and Counting Particulate Contamination on Surfaces |
|
ASTM F 799 |
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539) |
|
ASTM E 2254 |
Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers |
|
ASTM F 1869 |
Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride |
|
ASTM F 2247 |
Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method) |
|
ASTM F 2291 REV A |
Standard Practice for Design of Amusement Rides and Devices |
|
ASTM D 3800 |
Standard Test Method for Density of High-Modulus Fibers |
|
ASTM E 537 |
Standard Test Method for The Thermal Stability Of Chemicals By Differential Scanning Calorimetry |
|
ASTM F 17 |
Standard Terminology Relating to Flexible Barrier Packaging |
|
ASTM F 2083 REV B |
Standard Specification for Total Knee Prosthesis |
|
ASTM F 623 |
Standard Performance Specification for Foley Catheter |
|
ASTM D 5449/D 5449M |
Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders |
|
ASTM E 1169 |
Standard Guide for Conducting Ruggedness Tests |
|
ASTM F 1233 |
Standard Test Method for Security Glazing Materials And Systems |
|
ASTM F 2005 |
Standard Terminology for Nickel-Titanium Shape Memory Alloys |
|
ASTM F 2490 |
Standard Guide for Aircraft Electrical Load and Power Source Capacity Analysis |
|
ASTM F 1877 |
Standard Practice for Characterization of Particles |
|
ASTM C 480 |
Standard Test Method for Flexure Creep of Sandwich Constructions |
|
ASTM F 903 |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids |
|
ASTM E 424 |
Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials |
|
ASTM E 860 |
Standard Practice for Examining And Preparing Items That Are Or May Become Involved In Criminal or Civil Litigation |
|
ASTM D 7248/D 7248M |
Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens |
|
ASTM E 319 |
Standard Practice for the Evaluation of Single-Pan Mechanical Balances |
|
ASTM F 1645/F 1645M |
Standard Test Method for Water Migration in Honeycomb Core Materials |
|
ASTM F 1790 |
Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing |
|
ASTM F 2595 |
Standard Guide for Unmanned Undersea Vehicle (UUV) Sensor Data Formats |
|
ASTM E 1349 |
Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
|
ASTM E 144 |
Standard Practice for Safe Use of Oxygen Combustion Bombs |
|
ASTM F 2038 |
Standard Guide for Silicone Elastomers, Gels and Foams Used in Medical Applications Part 1 - Formulations and Uncured Materials |
|
ASTM E 1323 |
Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data |
|
ASTM E 1761 |
Standard Guide for Recommended Formats for Data Records Used in Computerization of Fatigue and Fracture Data of Metals |