|
ASTM D 6535 |
Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser |
|
ASTM D 6607 |
Standard Practice for Inclusion of Precision Statement Variation in Specification Limits |
|
ASTM D 6633 |
Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser |
|
ASTM D 6788 |
Standard Specification for Repositionable Pressure-Sensitive Flags |
|
ASTM D 6941 |
Standard Practice for Measuring Fluidization Segregation Tendencies of Powders |
|
ASTM D 7004 |
Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes |
|
ASTM D 7275 |
Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM) |
|
ASTM D 919 |
Standard Test Method for Copper Number of Paper and Paperboard-TAPPI T 430m-52 |
|
ASTM E 1513 |
Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs) |
|
ASTM E 1669 REV A |
Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding |
|
ASTM E 1890 |
Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment |
|
ASTM E 2323 |
Standard Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer |
|
ASTM E 2486 |
Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS) |
|
ASTM E 907 |
Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems |
|
ASTM C 1206 |
Standard Test Method for Plutonium by Iron (II)/Chromium (VI) Amperometric Titration |
|
ASTM C 1453 |
Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets |
|
ASTM C 1502 |
Standard Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide |
|
ASTM C 1561 |
Standard Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride by Alpha Spectrometry |
|
ASTM C 799 |
Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions |
|
ASTM D 2947 |
Standard Test Method for Screen Analysis of Asbestos Fibers |
|
ASTM D 2978 |
Standard Test Method for Volume of Processed Peat Materials |
|
ASTM D 3890 |
Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser |
|
ASTM D 4334 |
Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser |
|
ASTM D 5331 |
Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films |
|
ASTM D 5435 |
Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection |
|
ASTM D 5923 |
Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations |
|
ASTM D 6295/D 6295M |
Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape |
|
ASTM D 6390 |
Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
|
ASTM D 6590/D 6590M |
Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans |
|
ASTM D 6834 |
Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser |
|
ASTM D 7008 |
Standard Specification for Geosynthetic Alternate Daily Covers |
|
ASTM D 7106 |
Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes |
|
ASTM D 7281 |
Standard Test Method for Determining Water Migration Resistance Through Roof Membranes |
|
ASTM E 556 |
Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level) |
|
ASTM C 1108 |
Standard Test Method for Plutonium by Controlled-Potential Coulometry |
|
ASTM C 1119 |
Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes |
|
ASTM C 1511 |
Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Fibrous Glass Insulation (Aircraft Type) |
|
ASTM C 1570 |
Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Air Permeability Method) |
|
ASTM C 577 |
Standard Test Method for Permeability of Refractories |
|
ASTM C 676 |
Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware |
|
ASTM C 760 |
Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys |
|
ASTM C 771 |
Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants |
|
ASTM D 1865 |
Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs |
|
ASTM D 5039 |
Standard Test Methods for Identification of Wire Side of Paper-TAPPI T 455 |
|
ASTM D 6525 |
Standard Test Method for Measuring Nominal Thickness of Permanent Rolled Erosion Control Products |
|
ASTM D 6555 |
Guide for Evaluating System Effects in Repetitive-Member Wood Assembiles |
|
ASTM D 6654 |
Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser |
|
ASTM D 6787 |
Standard Specification for Repositionable Note Pad |
|
ASTM D 6874 |
Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration |
|
ASTM D 7077 |
Standard Test Method for Evaluation of Drop Size by weight of Solutions and Suspensions |
|
ASTM E 1637 |
Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems |
|
ASTM E 2140 |
Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head |
|
ASTM E 2557 |
Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments |
|
ASTM F 153 |
Standard Test Method for Determining the Yield of Wide Inked Computer Ribbons |
|
ASTM F 767 |
Standard Test Method for Image Stability of Chemical Carbonless Paper to Light |
|
ASTM F 843 |
Standard Test Method for Assessing the Color Strength and Dispersibility of Alkali Blue Pigment in Hot Melt Carbon Copy Paper Ink |
|
ASTM F 935 |
Standard Test Method for Comparing Cover-Up Correction Media |
|
ASTM C 1223 |
Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories |
|
ASTM D 1670 |
Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials |
|
ASTM D 6917 |
Standard Guide for Selection of Test for Prefabricated Vertical Drains (PVD) |
|
ASTM D 6958 |
Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings |
|
ASTM D 7051 |
Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface |
|
ASTM E 405 |
Standard Test Methods for Wear Testing Rotary Operators for Windows |
|
ASTM C 1539 |
Standard Test Method for Determination of Technetium-99 in Uranium Hexafluoride by Liquid Scintillation Counting |
|
ASTM D 5651 REV A |
Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials |
|
ASTM D 6356 |
Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing |
|
ASTM E 2068 |
Standard Test Method for Determination of Operating Force of Sliding Windows and Doors |
|
ASTM E 2342 |
Standard Test Method for Durability Testing of Duct Sealants |
|
ASTM C 1203 |
Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel |
|
ASTM C 1204 |
Standard Test Method for Uranium in the Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration |
|
ASTM C 1266 |
Standard Test Method for Flow Characteristics of Preformed Tape Sealants |
|
ASTM C 1343 |
Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-Ray Fluorescence |
|
ASTM C 1597M |
Standard Specification for Gypsum Wallboard (Hard Metric Sizes) |
|
ASTM D 3094 |
Standard Test Method for Seepage Rate of Aerosol Products |
|
ASTM D 5081 |
Standard Test Method for Aggregate Layer Hiding Power |
|
ASTM D 6536 |
Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser |
|
ASTM E 503/E 503M |
Standard Test Methods for Measurement of Skid Resistance on Paved Surfaces Using a Passenger Vehicle Diagonal Braking Technique |
|
ASTM C 1416 |
Standard Test Method for Uranium Analysis Waste Water by X-Ray Fluorescence |
|
ASTM D 1573 |
Standard Test Method for Heat Aging of Asbestos Textiles |
|
ASTM D 6136 |
Standard Test Method for Kerosene Number of Unsaturated (Dry) Felt by the Vacuum Method |
|
ASTM D 6225 |
Standard Test Method for Granule Cover of Mineral Surfaced Roofing |
|
ASTM D 7207 |
Standard Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically- Induced Shear Stresses under Bench-Scale Conditions |
|
ASTM D 6940 |
Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids |
|
ASTM D 7047 |
Standard Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium) Used as a Tackifiers |
|
ASTM D 7056 |
Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams |
|
ASTM D 7030 |
Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine |
|
ASTM D 6918 |
Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition |