|
ASTM D 3090 |
Standard Practice for Storage Testing of Aerosol Products |
|
ASTM D 3497 |
Standard Test Method for Dynamic Modulus of Asphalt Mixtures |
|
ASTM D 3816/D 3816M |
Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes |
|
ASTM D 4219 |
Standard Test Method for Unconfined Compressive Strength Index of Chemical- Grouted Soils |
|
ASTM D 4531 |
Standard Test Methods for Bulk Density of Peat and Peat Products |
|
ASTM D 4611 |
Standard Test Method for Specific Heat of Rock and Soil |
|
ASTM D 5124 |
Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation |
|
ASTM D 5240 |
Standard Test Method for Testing Rock Slabs to Evaluate Soundness of Riprap by Use of Sodium Sulfate or Magnesium Sulfate |
|
ASTM D 5715 |
Standard Test Method for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method) |
|
ASTM D 6141 |
Standard Guide for Screening Clay Portion of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids |
|
ASTM D 6171 |
Standard Guide for Documenting a Ground-Water Modeling Code |
|
ASTM D 6230 |
Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers |
|
ASTM D 6464 REV A |
Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
|
ASTM D 6723 |
Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) |
|
ASTM D 6910 |
Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries |
|
ASTM D 7105 |
Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems |
|
ASTM E 1486M |
Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric) |
|
ASTM E 1489 |
Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device |
|
ASTM E 1664 REV A |
Standard Classification for Serviceability of an Office Facility for Layout and Building Factors |
|
ASTM E 1728 |
Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
|
ASTM E 1776 |
Standard Guide for Development of Fire-Risk-Assessment Standards |
|
ASTM E 1783 |
Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
|
ASTM E 1825 |
Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems |
|
ASTM E 2141 |
Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units |
|
ASTM E 2179 |
Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
|
ASTM E 2395 |
Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact |
|
ASTM E 445/E 445M |
Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped with Full-Scale Tires |
|
ASTM E 546 |
Standard Test Method for Frost Point of Sealed Insulating Glass Units |
|
ASTM E 936 |
Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing |
|
ASTM E 966 |
Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements |
|
ASTM F 1643 |
Standard Test Methods for Detention Sliding Door Locking Device Assembly |
|
ASTM F 218 |
Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass |
|
ASTM C 1000 |
Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry |
|
ASTM C 1182 |
Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation |
|
ASTM C 1244M REV A |
Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill [Metric] |
|
ASTM C 1294 |
Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials |
|
ASTM C 1335 |
Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation |
|
ASTM C 147 |
Standard Test Methods for Internal Pressure Strength of Glass Containers |
|
ASTM C 1589 |
Standard Practice for Outdoor Weathering of Construction Seals and Sealants |
|
ASTM C 322 |
Standard Practice for Sampling Ceramic Whiteware Clays |
|
ASTM C 658 |
Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile |
|
ASTM C 668 |
Standard Specification for Asbestos-Cement Transmission Pipe |
|
ASTM C 861 |
Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes |
|
ASTM C 909 |
Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes |
|
ASTM D 1101 REV A |
Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use |
|
ASTM D 1635 |
Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading |
|
ASTM D 1758 |
Standard Test Method of Evaluating Wood Preservatives by Field Tests with Stakes |
|
ASTM D 2481 |
Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means of Small Size Specimens |
|
ASTM D 2866 |
Standard Test Method for Total Ash Content of Activated Carbon |
|
ASTM D 3200 |
Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles |
|
ASTM D 4069 |
Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams |
|
ASTM D 4106 |
Standard Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method |
|
ASTM D 4300 |
Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
|
ASTM D 4320 |
Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Design Strength Parameters |
|
ASTM D 4866 |
Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures |
|
ASTM D 5100 REV A |
Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen |
|
ASTM D 5535 |
Standard Terminology Relating to Formed-In-Place Sealants for Joints and Cracks in Pavements |
|
ASTM D 5635 REV A |
Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens |
|
ASTM D 6033 |
Standard Guide for Describing the Functionality of a Ground-Water Modeling Code |
|
ASTM D 6134 |
Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems |
|
ASTM D 6819 |
Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus |
|
ASTM E 1795 |
Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
|
ASTM E 2013 |
Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study |
|
ASTM E 2413 |
Standard Guide for Hospital Preparedness and Response |
|
ASTM F 1355 |
Standard Guide for Irradiation of Fresh Agricultural Produce as a Phytosanitary Treatment |
|
ASTM F 2555 |
Standard Practice for Determining Page Yield of Ink Jet Printer Cartridges Continuous Printing Method |
|
ASTM F 79 |
Standard Specification for Type 101 Sealing Glass |
|
ASTM C 1022 |
Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate |
|
ASTM C 1027 |
Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile |
|
ASTM C 1082 |
Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill |
|
ASTM C 1162 |
Standard Test Method for Loose Density of Asbestos |
|
ASTM C 1189 |
Standard Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors |
|
ASTM C 1558 |
Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation1 |
|
ASTM C 1629/C 1629M |
Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels |
|
ASTM C 163 |
Standard Practice for Mixing Thermal Insulating Cement Samples |
|
ASTM C 444M |
Standard Specification for Perforated Concrete Pipe (Metric) |
|
ASTM C 458 |
Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
|
ASTM C 502 |
Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile |
|
ASTM C 600 |
Standard Test Method of Thermal Shock Test on Glass Pipe |
|
ASTM C 654M REV A |
Standard Specification for Porous Concrete Pipe [Metric] |
|
ASTM C 877M |
Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, And Precast Box Sections [Metric] |
|
ASTM C 903 |
Standard Practice for Preparing Refractory Castable Specimens by Cold Gunning |
|
ASTM C 917 |
Standard Test Method for Evaluation of Cement Strength Uniformity from a Single Source |
|
ASTM D 1109 |
Standard Test Method for 1 % Sodium Hydroxide Solubility of Wood |
|
ASTM D 1110 |
Standard Test Methods for Water Solubility of Wood |
|
ASTM D 1582 |
Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives |
|
ASTM D 1669 |
Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings |
|
ASTM D 2175 |
Standard Test Method for Book Bulk and Book Bulking Number of Paper |
|
ASTM D 2976 |
Standard Test Method for pH of Peat Materials |
|
ASTM D 315 |
Standard Specification for Woven Asbestos Tape |
|
ASTM D 3423 |
Standard Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type) |
|
ASTM D 3496 |
Standard Practice for Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing |
|
ASTM D 3808 |
Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion |
|
ASTM D 4223 |
Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils |
|
ASTM D 4506 |
Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using a Radial Jacking Test |
|
ASTM D 4933 |
Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials |
|
ASTM D 5040 |
Standard Test Methods for Ash Content of Adhesives |
|
ASTM D 5228 |
Standard Test Method for Determination of Butane Working Capacity of Activated Carbon |
|
ASTM D 5335 |
Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gages |
|
ASTM D 5474 |
Standard Guide for Selection of Data Elements for Ground-Water Investigations |
|
ASTM D 5608 |
Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites |
|
ASTM D 5754 |
Standard Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements - Trilinear Diagrams for Two or More Analyses |
|
ASTM D 5764 REV A |
Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
|
ASTM D 5887 |
Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter |
|
ASTM D 5973 |
Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing |
|
ASTM D 6249 |
Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals |
|
ASTM D 645/D 645M |
Standard Test Method for Thickness of Paper and Paperboard |
|
ASTM D 6510 |
Standard Guide for Selection of Asphalt Used in Built-Up Roofing Systems |
|
ASTM D 6694 |
Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing |
|
ASTM D 7002 |
Standard Practice for Leak Location on Exposed Geomembranes Using the Water Puddle System |
|
ASTM D 7048 |
Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs |
|
ASTM D 7322 |
Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions |
|
ASTM D 776 |
Standard Test Method for Determination of Effect of Dry Heat on Properties of Paper and Board |
|
ASTM D 829 |
Standard Test Methods for Wet Tensile Breaking Strength of Paper and Paper Products |
|
ASTM E 1334 |
Standard Practice for Rating the Serviceability of a Building or Building-Related Facility |
|
ASTM E 1424 |
Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors under Specified Pressure and Temperature Differences Across the Specimen |
|
ASTM E 1551 |
Standard Specification for Special Purpose, Smooth-Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment |
|
ASTM E 1656 |
Standard Guide for Classification of Automated Pavement Condition Survey Equipment |
|
ASTM E 2029 |
Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution |
|
ASTM E 660 |
Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine |
|
ASTM F 1125 |
Standard Terminology of Image Quality in Impact Printing Systems |
|
ASTM F 144 |
Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods |
|
ASTM F 1857 |
Standard Terminology Relating to Ink Jet Printers and Images Made Therefrom |
|
ASTM F 2349 |
Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems |
|
ASTM F 842 |
Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact |
|
ASTM C 1023 |
Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards |
|
ASTM C 1054 |
Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens |
|
ASTM C 1212 |
Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids |
|
ASTM C 1236 |
Standard Guide for In-Plant Performance Evaluation of Automatic Vehicle SNM Monitors |
|
ASTM C 1255 |
Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy |
|
ASTM C 1351M |
Standard Test Method for Measurement of Viscosity of Glass Between 104 PaÂs and 108 PaÂs by Viscous Compression of a Solid Right Cylinder [Metric] |
|
ASTM C 1483 |
Standard Specification for Exterior Solar Radiation Control Coatings on Buildings |
|
ASTM C 1487 |
Standard Guide for Remedying Strucutral Silicone Glazing |
|
ASTM C 1506 |
Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters |
|
ASTM C 1606 |
Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware |
|
ASTM C 1647 |
Standard Practice for Removal of Uranium or Plutonium, or both, for Impurity Assay in Uranium or Plutonium Materials |
|
ASTM C 1652/C 1652M |
Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids |
|
ASTM C 416 |
Standard Classification of Silica Refractory Brick |
|
ASTM C 598 |
Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending |
|
ASTM C 686 |
Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation |
|
ASTM C 711 |
Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants |
|
ASTM C 889 |
Standard Test Methods for Chemical and Mass Spectrographic Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder |
|
ASTM D 3481 |
Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions |
|
ASTM D 4341 |
Standard Test Method for Creep of Hard Rock Core Specimens in Uniaxial Compression |
|
ASTM D 4405 |
Standard Test Method for Creep of Soft Rock Core Specimens in Uniaxial Compression at Ambient or Elevated Temperature |
|
ASTM D 5105 |
Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight |
|
ASTM D 5469 |
Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems |
|
ASTM D 5493 |
Standard Test Method for Permittivity of Geotextiles Under Load |
|
ASTM D 6170 |
Standard Guide for Selecting A Ground-Water Modeling Code |
|
ASTM D 6551/D 6551M |
Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus |
|
ASTM D 6884 |
Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems |
|
ASTM D 6948 |
Standard Practice for Application of Refined Coal Tar (Ready to Use, Commercial Grade) |
|
ASTM D 7001 |
Standard Specification for Geocomposites for Pavement Edge Drains and Other High- Flow Applications |
|
ASTM E 1007 |
Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures |
|
ASTM E 1222 |
Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
|
ASTM E 2099 |
Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems |
|
ASTM E 2100 |
Standard Practice for Calculating the International Runway Friction Index |
|
ASTM E 2158 |
Standard Specification for Dedicated Short Range Communication (DSRC) Physical Layer Using Microwave in the 902 to 928 MHz Band |
|
ASTM E 2399 |
Standard Test Method for Maximum Media Density for Dead Load Analysis of Green Roof Systems |
|
ASTM F 1425 |
Standard Test Method for Determining the Tribocharge of Two-Component Developer Materials |
|
ASTM F 2250 |
Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials |
|
ASTM F 854 |
Standard Test Method for Cleanliness of Carbon Paper |
|
ASTM C 1073 REV A |
Standard Test Method for Hydraulic Activity of Ground Slag by Reaction with Alkali |
|
ASTM C 1091 REV A |
Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines |
|
ASTM C 1171 |
Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories |
|
ASTM C 1225 |
Standard Specification for Non-Asbestos Fiber-Cement Roofing Shingles, Shakes, and Slates |
|
ASTM C 1318 |
Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD) |
|
ASTM C 1382 |
Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints |
|
ASTM C 1411 |
Standard Practice for the Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis |
|
ASTM C 1518 |
Standard Specification for Precured Elastomeric Silicone Joint Sealants |
|
ASTM C 1519 |
Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures |
|
ASTM C 1530 |
Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses |
|
ASTM C 1531 |
Standard Test Methods for In Situ Measurement Of Masonry Mortar Joint Shear Strength Index |
|
ASTM C 1542/C 1542M |
Standard Test Method for Measuring Length of Concrete Cores |
|
ASTM C 212 |
Standard Specification for Structural Clay Facing Tile |
|
ASTM C 288 |
Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide |
|
ASTM C 508 |
Standard Specification for Asbestos-Cement Underdrain Pipe-AASHTO No.: M 189-81 |
|
ASTM C 551 |
Standard Specification for Asbestos-Cement Fiberboard Insulating Panels |
|
ASTM C 657 |
Standard Test Method for D-C Volume Resistivity of Glass |
|
ASTM C 663 |
Standard Specification for Asbestos-Cement Storm Drain Pipe |
|
ASTM C 737 |
Standard Specification for Limestone for Dusting of Coal Mines |
|
ASTM C 786 |
Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-Micrometer (No. 50), 150-Micrometer (No. 100), and 75- Micrometer (No. 200) Sieves by Wet Methods |
|
ASTM C 788 |
Standard Specification for Nuclear-Grade Uranyl Nitrate Solution or Crystals |
|
ASTM C 806 |
Standard Test Method for Restrained Expansion of Expansive Cement Mortar |
|
ASTM C 964 |
Standard Guide for Lock-Strip Gasket Glazing |
|
ASTM D 2980 |
Standard Test Method for Volume Mass, Moisture-Holding Capacity, and Porocity of Saturated Peat Materials |
|
ASTM D 3747 |
Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation |
|
ASTM D 4267 |
Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers |
|
ASTM D 4502 |
Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints |
|
ASTM D 4544 |
Standard Practice for Estimating Peat Deposit Thickness |
|
ASTM D 4696 |
Standard Guide for Pore-Liquid Sampling from the Vadose Zone |
|
ASTM D 4825 |
Standard Test Method for Measurement of Curl in Cut-Sized Office Paper |
|
ASTM D 5602 |
Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens |
|
ASTM D 5634 |
Standard Guide for Selection of Permanent and Durable Offset and Book Papers |
|
ASTM D 6036 |
Standard Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements - Use of Maps |
|
ASTM D 6496 REV A |
Standard Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners |
|
ASTM D 6998 |
Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts |
|
ASTM D 7064 |
Standard Practice for Open-Graded Friction Course (OGFC) Mix Design |
|
ASTM E 1170 |
Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surface |
|
ASTM E 1265 |
Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers-(Reinstated 2004) |
|
ASTM E 1612 |
Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
|
ASTM E 1796 |
Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
|
ASTM E 2354 |
Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units |
|
ASTM E 2398 |
Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Green Roof Systems |
|
ASTM F 1050 |
Standard Test Method for Determining Winding Torque and Tension of Typewriter Ribbons |
|
ASTM F 1320 |
Standard Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument |
|
ASTM C 1134 |
Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion |
|
ASTM C 1419 REV A |
Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young´s Modulus |
|
ASTM C 1489 |
Standard Specification for Lime Putty for Structural Purposes |
|
ASTM C 1546 |
Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems |
|
ASTM C 1555 REV A |
Standard Practice for Autoclaved Aerated Concrete Masonry |
|
ASTM C 221 |
Standard Specification for Corrugated Asbestos-Cement Sheets |
|
ASTM C 541 |
Standard Specification for Linings for Asbestos-Cement Pipe |
|
ASTM C 607 |
Standard Practice for Coking Large Shapes of Carbon-Bearing Materials |
|
ASTM C 731 |
Standard Test Method for Extrudability, After Package Aging, of Latex Sealants |
|
ASTM C 777 |
Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass |
|
ASTM C 863 |
Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures |
|
ASTM C 887 |
Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar |
|
ASTM D 1107 |
Standard Test Method for Ethanol-Toluene Solubility of Wood-TAPPI T 204 OS-76 |
|
ASTM D 1634 |
Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method) |
|
ASTM D 1994 |
Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives |
|
ASTM D 2399 |
Standard Practice for Selection of Cutback Asphalts |
|
ASTM D 2946 |
Standard Terminology for Asbestos and Asbestos-Cement Products |
|
ASTM D 3507 |
Standard Test Methods for Penetration of Preservatives in Wood and for Differentiating between Heartwood and Sapwood |
|
ASTM D 3802 |
Standard Test Method for Ball-Pan Hardness of Activated Carbon |
|
ASTM D 5266 |
Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints |
|
ASTM D 5414 |
Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films |
|
ASTM D 5652 |
Standard Test Methods for Bolted Connections in Wood and Wood-Based Products |
|
ASTM D 5714 |
Standard Specification for Content of Digital Geospatial Metadata |
|
ASTM D 5726 |
Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing |
|
ASTM D 586 |
Standard Test Method for Ash in Pulp, Paper, and Paper Products |
|
ASTM D 6034 |
Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test |
|
ASTM D 6325 |
Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives |
|
ASTM D 6574 |
Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow |
|
ASTM D 6586 |
Standard Practice for the Prediction of Contaminat Adsorption on GAC in Aqueous Systems Using Rapid Small-Scale Column Tests |
|
ASTM D 7100 |
Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions |
|
ASTM D 7228 REV A |
Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures |
|
ASTM E 1258 |
Standard Test Method for Airflow Calibration of Fan Pressurization Devices |
|
ASTM E 1602 |
Standard Guide for Construction of Solid Fuel Burning Masonry Heaters |
|
ASTM E 1644 |
Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
|
ASTM E 2240 |
Standard Test Method for Assessing the Current-Voltage Cycling Stability at 90°C (194°F) of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units |
|
ASTM E 2268 |
Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference |
|
ASTM E 2515 |
Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel |
|
ASTM F 1278 |
Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment |
|
ASTM F 1319 |
Standard Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method) |
|
ASTM F 1423 |
Standard Practice for Determination of the Quality of Monochrome Images Produced from Non-Impact Personal Computer Printers |
|
ASTM F 1424 |
Standard Test Method for Estimating Toner Usage in Full-Color Copiers Utilizing Dry Mono-Or-Dual-Component Toners |
|
ASTM F 1550 |
Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter |
|
ASTM F 1942 |
Standard Practice for Creating Test Targets for Determining the Ink Yield of the Imaging Supplies Used in Ink Jet Printers |
|
ASTM F 974 |
Standard Practice for Determination of Color Response of Electrostatic Copying System, Black and White Output |
|
ASTM C 1031 |
Standard Specification for Nuclear-Grade Aluminum Oxide Powder |
|
ASTM C 1130 |
Standard Practice for Calibrating Thin Heat Flux Transducers |
|
ASTM C 1190 |
Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick |
|
ASTM C 1265 |
Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications |
|
ASTM C 1439 |
Standard Test Methods for Polymer-Modified Mortar and Concrete |
|
ASTM C 1463 |
Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis |
|
ASTM C 1526 |
Standard Specification for Serpentine Dimension Stone |
|
ASTM C 1532 |
Standard Practice for Selection, Removal, and Shipment of Masonry Specimens from Existing Construction |
|
ASTM C 159 |
Standard Specification for Vitrified Clay Filter Blocks |
|
ASTM C 1607 |
Standard Test Method for Determination of “Microwave Safe for Reheating†for Ceramicware |
|
ASTM C 1630 |
Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations |
|
ASTM C 659 |
Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels |
|
ASTM C 727 |
Standard Practice for Installation and Use of Reflective Insulation in Building Constructions |
|
ASTM C 732 |
Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants |
|
ASTM C 770 |
Standard Test Method for Measurement of Glass Stress - Optical Coefficient |
|
ASTM C 846 |
Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing |
|
ASTM C 922 |
Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets |
|
ASTM D 1975 |
Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails |
|
ASTM D 2063 |
Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures |
|
ASTM D 3061 |
Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans |
|
ASTM D 3105 |
Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials |
|
ASTM D 3458 |
Standard Specification for Copies from Office Copying Machines for Permanent Records |
|
ASTM D 3889/D 3889M |
Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature |
|
ASTM D 4105 |
Standard Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method |
|
ASTM D 6125 |
Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester) |
|
ASTM D 6285 |
Standard Guide for Locating Abandoned Wells |
|
ASTM D 6627 |
Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures |
|
ASTM D 6655 |
Standard Terminology Relating to Mechanical Pump Dispensers |
|
ASTM D 6704 |
Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material |
|
ASTM D 6932 |
Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures |
|
ASTM D 7229 |
Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor |
|
ASTM D 985 |
Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm) |
|
ASTM E 1130 |
Standard Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index |
|
ASTM E 1727 |
Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
|
ASTM E 2187 |
Standard Test Method for Measuring the Ignition Strength of Cigarettes |
|
ASTM E 2461 |
Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs |
|
ASTM E 2560 |
Standard Specification for Data Format for Pavement Profile |
|
ASTM E 518 |
Standard Test Methods for Flexural Bond Strength of Masonry |
|
ASTM E 69 |
Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus |
|
ASTM F 2251 |
Standard Test Method for Thickness Measurement of Flexible Packaging Material |
|
ASTM C 1160 |
Standard Specification for Chemical-Resistant Carbon Brick |
|
ASTM C 1187 |
Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks |
|
ASTM C 1274 |
Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption |
|
ASTM C 1276 |
Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer |
|
ASTM C 1336 |
Standard Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions |
|
ASTM C 1374 |
Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation |
|
ASTM C 1405 REV A |
Standard Specification for Glazed Brick (Single Fired, Brick Units) |
|
ASTM C 1407 |
Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes |
|
ASTM C 1429 |
Standard Test Methods for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer |
|
ASTM C 1457 |
Standard Test Method for Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction |