|
ASTM D 7115 |
Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading |
|
ASTM D 7128 |
Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation |
|
ASTM D 7147 |
Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers |
|
ASTM D 7149 |
Standard Practice for Determining the Freeze Thaw Stability of Adhesives |
|
ASTM D 7158 |
Standard Test Method for Wind Resistance of Sealed Asphalt Shingles (Uplift Force/Uplift Resistance Method) |
|
ASTM D 7173 |
Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt |
|
ASTM D 7174 |
Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction |
|
ASTM D 7175 |
Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer |
|
ASTM D 7177 |
Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes |
|
ASTM D 7179 |
Standard Test Method for Determining Geonet Breaking Force |
|
ASTM D 7180 |
Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects |
|
ASTM D 7186 |
Standard Practice for Quality Assurance Observation of Roof Construction and Repair |
|
ASTM D 722 |
Standard Test Method for Grease Resistance of Paper |
|
ASTM D 724 |
Standard Test Method for Surface Wettability of Paper (Angle-Of-Contact Method) |
|
ASTM D 726 |
Standard Test Method for Resistance of Nonporous Paper to Passage of Air |
|
ASTM D 727 |
Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method-TAPPI T 427 SU-71 |
|
ASTM D 75 |
Standard Practice for Sampling Aggregates-AASHTO No. T2 |
|
ASTM D 774/D 774M |
Standard Test Method for Bursting Strength of Paper |
|
ASTM D 776 |
Standard Test Method for Determination of Effect of Dry Heat on Properties of Paper and Board |
|
ASTM D 777 |
Standard Test Methods for Flammability of Treated Paper and Paperboard |
|
ASTM D 778 |
Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot Extraction and Cold-Extraction Procedures) |
|
ASTM D 779 |
Standard Test Method for Water Resistance of Paper, Paperboard, and Other Sheet Materials by the Dry Indicator Method |
|
ASTM D 780 |
Standard Test Method for Printing Ink Permeation of Paper (Castor Oil Test)- TAPPI T 462 Su 72 |
|
ASTM D 8 |
Standard Terminology Relating to Materials for Roads and Pavements |
|
ASTM D 806 |
Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures |
|
ASTM D 824 |
Standard Test Method for Rate of Absorption of Water by Bibulous Papers |
|
ASTM D 828 |
Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus |
|
ASTM D 829 |
Standard Test Methods for Wet Tensile Breaking Strength of Paper and Paper Products |
|
ASTM D 854 |
Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer |
|
ASTM D 88 |
Standard Test Method for Saybolt Viscosity-AASHTO No.: T72 |
|
ASTM D 880 |
Standard Test Method for Impact Testing for Shipping Containers and Systems |
|
ASTM D 896 |
Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents |
|
ASTM D 897 |
Standard Test Method for Tensile Properties of Adhesive Bonds |
|
ASTM D 898 |
Standard Test Method for Applied Weight per Unit Area of Dried Adhesive Solids |
|
ASTM D 899 |
Standard Practice for Applied Weight per Unit Area of Liquid Adhesive |
|
ASTM D 9 |
Standard Terminology Relating to Wood and Wood-Based Products |
|
ASTM D 903 |
Standard Test Method for Peel or Stripping Strength of Adhesive Bonds |
|
ASTM D 904 |
Standard Practice for Exposure of Adhesive Specimens to Artificial Light |
|
ASTM D 905 |
Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading |
|
ASTM D 906 |
Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading |
|
ASTM D 907 |
Standard Terminology of Adhesives |
|
ASTM D 918 |
Standard Test Method for Blocking Resistance of Paper and Paperboard- TAPPI T 477 m-47 |
|
ASTM D 919 |
Standard Test Method for Copper Number of Paper and Paperboard-TAPPI T 430m-52 |
|
ASTM D 946 |
Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction |
|
ASTM D 950 |
Standard Test Method for Impact Strength of Adhesive Bonds- (Reinstated) |
|
ASTM D 951 |
Standard Test Method for Water Resistance of Shipping Containers by Spray Method |
|
ASTM D 977 |
Standard Specification for Emulsified Asphalt |
|
ASTM D 979 |
Standard Practice for Sampling Bituminous Paving Mixtures |
|
ASTM D 98 |
Standard Specification for Calcium Chloride |
|
ASTM D 982 |
Standard Test Method for Organic Nitrogen in Paper and Paperboard- Reinstated |
|
ASTM D 984 |
Standard Test Methods for Reducible Sulfur in Paper-TAPPI T 406 Su- 72 |
|
ASTM D 985 |
Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm) |
|
ASTM D 994 |
Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type) |
|
ASTM D 995 REV B |
Standard Specification for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures |
|
ASTM D 996 |
Standard Terminology of Packaging and Distribution Environments |
|
ASTM D 999 |
Standard Test Methods for Vibration Testing of Shipping Containers |
|
ASTM E 1007 |
Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures |
|
ASTM E 1014 |
Standard Guide for Measurement of Outdoor A-Weighted Sound Levels |
|
ASTM E 102 |
Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures |
|
ASTM E 1042 |
Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray |
|
ASTM E 1050 |
Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System |
|
ASTM E 1057 |
Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems |
|
ASTM E 1074 |
Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems |
|
ASTM E 108 |
Standard Test Methods for Fire Tests of Roof Coverings |
|
ASTM E 1082 |
Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness |
|
ASTM E 1091 |
Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels |
|
ASTM E 11 |
Standard Specification for Wire Cloth and Sieves for Testing Purposes |
|
ASTM E 1105 |
Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference |
|
ASTM E 1110 |
Standard Classification for Determination of Articulation Class |
|
ASTM E 1111 |
Standard Test Method for Measuring the Interzone Attenuation of Open Office Components |
|
ASTM E 1121 |
Standard Practice for Measuring Payback for Investments in Buildings and Building Systems |
|
ASTM E 1123 |
Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials |
|
ASTM E 1124 |
Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method |
|
ASTM E 1130 |
Standard Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index |
|
ASTM E 1136 |
Standard Specification for a Radial Standard Reference Test Tire |
|
ASTM E 1155 |
Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers |
|
ASTM E 1155M |
Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers (Metric) |
|
ASTM E 1166 |
Standard Guide for Network Level Pavement Management |
|
ASTM E 1170 |
Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surface |
|
ASTM E 1179 |
Standard Specification for Sound Sources Used for Testing Open Office Components and Systems |
|
ASTM E 1185 |
Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems |
|
ASTM E 1186 |
Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems |
|
ASTM E 119 REV A |
Standard Test Methods for Fire Tests of Building Construction and Materials |
|
ASTM E 1190 |
Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members |
|
ASTM E 1215 |
Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness |
|
ASTM E 1222 |
Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
|
ASTM E 1233 |
Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Cyclic Air Pressure Differential |
|
ASTM E 1258 |
Standard Test Method for Airflow Calibration of Fan Pressurization Devices |
|
ASTM E 1264 |
Standard Classification for Acoustical Ceiling Products |
|
ASTM E 1265 |
Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers-(Reinstated 2004) |
|
ASTM E 1274 |
Standard Test Method for Measuring Pavement Roughness Using a Profilograph-(Reinstated) |
|
ASTM E 1289 |
Standard Specification for Reference Specimen for Sound Transmission Loss |
|
ASTM E 1300 |
Standard Practice for Determining Load Resistance of Glass in Buildings |
|
ASTM E 1307 |
Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels |
|
ASTM E 1317 REV A |
Standard Test Method for Flammability of Marine Surface Finishes |
|
ASTM E 1318 |
Standard Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods |
|
ASTM E 1321 REV A |
Standard Test Method for Determining Material Ignition and Flame Spread Properties |
|
ASTM E 1332 |
Standard Classification for Determination of Outdoor-Indoor Transmission Class |
|
ASTM E 1333 |
Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber |
|
ASTM E 1334 |
Standard Practice for Rating the Serviceability of a Building or Building- Related Facility |
|
ASTM E 1337 |
Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire |
|
ASTM E 1352 |
Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies |
|
ASTM E 1353 |
Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture |
|
ASTM E 1354 REV A |
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
|
ASTM E 1355 REV A |
Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models |
|
ASTM E 136 |
Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750 Degrees C |
|
ASTM E 1364 |
Standard Test Method for Measuring Road Roughness by Static Level Method |
|
ASTM E 1368 |
Standard Practice for Visual Inspection of Asbestos Abatement Projects |
|
ASTM E 1369 |
Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems |
|
ASTM E 1374 |
Standard Guide for Open Office Acoustics and Applicable ASTM Standards |
|
ASTM E 1375 |
Standard Test Method for Measuring the Interzone Attenuation of Furniture Panels Used as Acoustical Barriers |
|
ASTM E 1376 |
Standard Test Method for Measuring the Interzone Attenuation of Sound Reflected by Wall Finishes and Furniture Panels |
|
ASTM E 1399 |
Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
|
ASTM E 1408 |
Standard Test Method for Laboratory Measurement of the Sound Transmission Loss of Door Panels and Door Systems |
|
ASTM E 1410 |
Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings |
|
ASTM E 1414 REV A |
Standard Test Method for Airborne Sound Attenuation between Rooms Sharing a Common Ceiling Plenum |
|
ASTM E 1423 |
Standard Practice for Determining the Steady State Thermal Transmittance of Fenestration Systems |
|
ASTM E 1424 |
Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors under Specified Pressure and Temperature Differences Across the Specimen |
|
ASTM E 1425 |
Standard Practice for Determining the Acoustical Performance of Exterior Windows and Doors |
|
ASTM E 1433 |
Standard Guide for Selection of Standards on Environmental Acoustics |
|
ASTM E 1448 |
Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness |
|
ASTM E 1464 |
Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities |
|
ASTM E 1472 |
Standard Guide for Documenting Computer Software for Fire Models |
|
ASTM E 1474 |
Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter |
|
ASTM E 1480 |
Standard Terminology of Facility Management (Building-Related) |
|
ASTM E 1481 REV A |
Standard Terminology of Railing Systems and Rails for Buildings |
|
ASTM E 1486 |
Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria |
|
ASTM E 1486M |
Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric) |
|
ASTM E 1489 |
Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device |
|
ASTM E 1494 |
Standard Practice for Encapsulants for Spray- or Trowel-Applied Friable Asbestos-Containing Building Materials |
|
ASTM E 1503 |
Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System |
|
ASTM E 1509 |
Standard Specification for Room Heaters, Pellet Fuel-Burning Type |
|
ASTM E 1512 |
Standard Test Methods for Testing Bond Performance of Bonded Anchors |
|
ASTM E 1513 |
Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs) |
|
ASTM E 1514 |
Standard Specification for Structural Standing Seam Steel Roof Panel Systems |
|
ASTM E 1537 REV A |
Standard Test Method for Fire Testing of Upholstered Furniture |
|
ASTM E 154 |
Standard Test Methods for Water Vapor Retarders Used in Contact with Earth under Concrete Slabs, on Walls, or as Ground Cover |
|
ASTM E 1546 |
Standard Guide for Development of Fire-Hazard-Assessment Standards |
|
ASTM E 1551 REV A |
Standard Specification for Special Purpose, Smooth-Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment |
|
ASTM E 1554 |
Standard Test Methods for Determining External Air Leakage of Air Distribution Systems by Fan Pressurization |
|
ASTM E 1555 |
Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair |
|
ASTM E 1556 |
Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair |
|
ASTM E 1557 |
Standard Classification for Building Elements and Related Sitework - UNIFORMAT II |
|
ASTM E 1573 |
Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels |
|
ASTM E 1574 |
Standard Test Method for Measurement of Sound in Residential Spaces |
|
ASTM E 1590 |
Standard Test Method for Fire Testing of Mattresses |
|
ASTM E 1591 |
Standard Guide for Obtaining Data for Deterministic Fire Models |
|
ASTM E 1592 |
Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference |
|
ASTM E 1602 |
Standard Guide for Construction of Solid Fuel Burning Masonry Heaters |
|
ASTM E 1605 |
Standard Terminology Relating to Lead in Buildings |
|
ASTM E 1612 |
Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
|
ASTM E 1613 |
Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
|
ASTM E 162 REV A |
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
|
ASTM E 1623 |
Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
|
ASTM E 1637 |
Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems |
|
ASTM E 1643 |
Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular Fill under Concrete Slabs |
|
ASTM E 1644 |
Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
|
ASTM E 1645 |
Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
|
ASTM E 1646 |
Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference |
|
ASTM E 1656 |
Standard Guide for Classification of Automated Pavement Condition Survey Equipment |
|
ASTM E 1660 REV A |
Standard Classification for Serviceability of an Office Facility for Support for Office Work |
|
ASTM E 1661 REV A |
Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness |
|
ASTM E 1662 REV A |
Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment |
|
ASTM E 1663 |
Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology |
|
ASTM E 1664 REV A |
Standard Classification for Serviceability of an Office Facility for Layout and Building Factors |
|
ASTM E 1665 REV A |
Standard Classification for Serviceability of an Office Facility for Facility Protection |
|
ASTM E 1666 REV A |
Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions |
|
ASTM E 1667 REV A |
Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants |
|
ASTM E 1668 REV A |
Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff |
|
ASTM E 1669 REV A |
Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding |
|
ASTM E 1670 REV A |
Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance |
|
ASTM E 1671 REV A |
Standard Classification for Serviceability of an Office Facility for Cleanliness |
|
ASTM E 1677 |
Standard Specification for an Air Retarder (AR) Material or System for Low- Rise Framed Building Walls |
|
ASTM E 1678 |
Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis |
|
ASTM E 1679 |
Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility |
|
ASTM E 1680 |
Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems |
|
ASTM E 1686 |
Standard Guide for Selection of Environmental Noise Measurements and Criteria |
|
ASTM E 1692 REV A |
Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants |
|
ASTM E 1693 |
Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets |
|
ASTM E 1694 REV A |
Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies |
|
ASTM E 1699 |
Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems |
|
ASTM E 1700 |
Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope |
|
ASTM E 1701 |
Standard Classification for Serviceability of an Office Facility for Manageability |
|
ASTM E 1703/E 1703M |
Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge |
|
ASTM E 1704 |
Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures |
|
ASTM E 171 |
Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials |
|
ASTM E 1725 |
Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components |
|
ASTM E 1726 |
Standard Practice for Preparation of Soils Samples by Hotplate Digestion for Subsequent Lead Analysis |
|
ASTM E 1727 |
Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
|
ASTM E 1728 |
Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
|
ASTM E 1729 |
Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination |
|
ASTM E 1730 |
Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores |
|
ASTM E 1740 |
Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter |
|
ASTM E 1741 |
Standard Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry |
|
ASTM E 1745 |
Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs |
|
ASTM E 1748 |
Standard Test Method for Evaluating the Engagement between Windows and Insect Screens as an Integral System |
|
ASTM E 1749 |
Standard Terminology Relating to Rigid Wall Relocatable Shelters |
|
ASTM E 1753 |
Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
|
ASTM E 176 REV A |
Standard Terminology of Fire Standards |
|
ASTM E 1765 |
Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems |
|
ASTM E 1773 |
Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants |
|
ASTM E 1775 |
Standard Guide for Evaluating Performance of On-Site Extraction and Field- Portable Electrochemical or Spectrophotometric Analysis for Lead |
|
ASTM E 1776 |
Standard Guide for Development of Fire-Risk-Assessment Standards |
|
ASTM E 1777 |
Standard Guide for Prioritization of Data Needs for Pavement Management |
|
ASTM E 1778 REV A |
Standard Terminology Relating to Pavement Distress |
|
ASTM E 1779 REV A |
Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements |
|
ASTM E 1780 |
Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source |
|
ASTM E 1783 |
Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
|
ASTM E 1792 |
Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
|
ASTM E 1793 |
Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters |
|
ASTM E 1794 |
Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200 Degrees F Elevated Humidity Service), Type II Panels |
|
ASTM E 1795 |
Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
|
ASTM E 1796 |
Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
|
ASTM E 1797 |
Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
|
ASTM E 1800 |
Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels |
|
ASTM E 1801 |
Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters |
|
ASTM E 1804 |
Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project |
|
ASTM E 1822 REV B |
Standard Test Method for Fire Testing of Stacked Chairs |
|
ASTM E 1825 |
Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems |
|
ASTM E 1826 |
Standard Specification for Low Volatile Organic Compound (VOC) Corrosion- Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded |
|
ASTM E 1827 |
Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door |
|
ASTM E 1828 |
Standard Guide for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint |
|
ASTM E 1836 |
Standard Classification for Building Floor Area Measurements for Facility Management |
|
ASTM E 1844 |
Standard Specification for A Size 10 x 4-5 Smooth-Tread Friction Test Tire |
|
ASTM E 1851 |
Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures |
|
ASTM E 1857 |
Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces |
|
ASTM E 1859 |
Standard Test Method for Friction Coefficient Measurements between Tire and Pavement Using a Variable Slip Technique |
|
ASTM E 1864 |
Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and Around Buildings and Related Structures |
|
ASTM E 1886 |
Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
|
ASTM E 1889 |
Standard Guide for Pavement Management Implementation |
|
ASTM E 1890 |
Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment |
|
ASTM E 1895 |
Standard Guide for Determining Uses and Limitations of Deterministic Fire Models |
|
ASTM E 1908 |
Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) |
|
ASTM E 1911 |
Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester |
|
ASTM E 1925 |
Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures |
|
ASTM E 1926 |
Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements |
|
ASTM E 1927 |
Standard Guide for Conducting Subjective Pavement Ride Quality Ratings |
|
ASTM E 1946 |
Standard Practice for Measuring Cost Risk of Buildings and Building Systems |
|
ASTM E 1957 |
Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers |
|
ASTM E 1960 |
Standard Practice for Calculating International Friction Index of a Pavement Surface |
|
ASTM E 1966 |
Standard Test Method for Fire-Resistive Joint Systems |
|
ASTM E 1971 |
Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings |
|
ASTM E 1974 REV A |
Standard Specification for Shelter, Electrical, Equipment S-250/G |
|
ASTM E 1975 REV A |
Standard Specification for Shelter, Electrical, Equipment S-280/G |
|
ASTM E 1976 |
Standard Specification for Shelter, Tactical, Nonexpandable |
|
ASTM E 1977 |
Standard Specification for Shelter, Tactical, Expandable, One- Side |
|
ASTM E 1978 |
Standard Specification for Shelter, Tactical, Expandable, Two- Side |
|
ASTM E 1979 |
Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
|
ASTM E 1980 |
Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces |
|
ASTM E 1991 |
Standard Guide for Environmental Life Cycle Assessment of Building Materials/Products |
|
ASTM E 1993 |
Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs |
|
ASTM E 1995 REV A |
Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, with the Test Specimen Oriented Horizontally |
|
ASTM E 1996 REV B |
Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
|
ASTM E 1998 |
Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances |
|
ASTM E 2004 |
Standard Test Method for Facing Cleavage of Sandwich Panels |
|
ASTM E 2010 |
Standard Test Method for Positive Pressure Fire Tests of Window Assemblies |
|
ASTM E 2013 |
Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study |
|
ASTM E 2025 |
Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies |
|
ASTM E 2026 |
Standard Guide for the Estimation of Building Damageability in Earthquakes |
|
ASTM E 2029 |
Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution |
|
ASTM E 2032 |
Standard Guide for Extension of Data from Fire Endurance Tests |
|
ASTM E 2034 |
Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces |
|
ASTM E 2051 |
Standard Practice for the Determination of Lead in Paint, Settled Dust, Soil and Air Particulate by Field-Portable Electroanalysis |
|
ASTM E 2052 |
Standard Guide for Evaluation, Management, and Control of Lead Hazards in Facilities-Replaces PS53-1997 |
|
ASTM E 2058 |
Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA) |
|
ASTM E 2061 |
Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles |
|
ASTM E 2067 |
Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
|
ASTM E 2068 |
Standard Test Method for Determination of Operating Force of Sliding Windows and Doors |
|
ASTM E 2074 |
Standard Test Method for Fire Tests of Door Assemblies, Including Positive Pressure Testing of Side-Hinged and Pivoted Swinging Door Assemblies |
|
ASTM E 2083 |
Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit |
|
ASTM E 2094 |
Standard Practice for Evaluating the Service Life of Chromogenic Glazings |
|
ASTM E 2098 |
Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), After Exposure to a Sodium Hydroxide Solution |
|
ASTM E 2099 |
Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems |
|
ASTM E 2100 |
Standard Practice for Calculating the International Runway Friction Index |
|
ASTM E 2101 |
Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer |
|
ASTM E 2102 REV A |
Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
|
ASTM E 2103 |
Standard Classification for Bridge Elements and Related Approach Work |
|
ASTM E 2110 |
Standard Terminology for Exterior Insulation and Finish Systems (EIFS) |
|
ASTM E 2112 |
Standard Practice for Installation of Exterior Windows, Doors and Skylights |
|
ASTM E 2114 REV A |
Standard Terminology for Sustainability Relative to the Performance of Buildings |
|
ASTM E 2119 |
Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices |
|
ASTM E 2120 |
Standard Practice for the Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films |
|
ASTM E 2121 |
Standard Practice for Installing Radon Mitigation Systems in Existing Low- Rise Residential Buildings |
|
ASTM E 2126 |
Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings |
|
ASTM E 2127 REV A |
Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction |
|
ASTM E 2128 REV A |
Standard Guide for Evaluating Water Leakage of Building Walls |
|
ASTM E 2129 |
Standard Practice for Data Collection for Sustainability Assessment of Building Products |
|
ASTM E 2133 |
Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface |
|
ASTM E 2134 |
Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS) |
|
ASTM E 2136 |
Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings - Durability |
|
ASTM E 2140 |
Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head |
|
ASTM E 2141 |
Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units |
|
ASTM E 2150 |
Standard Classification for Life-Cycle Environmental Work ElementsEnvironmental Cost Element Structure |
|
ASTM E 2151 |
Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings |
|
ASTM E 2156 |
Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single- Family Attached and Detached Dwellings |
|
ASTM E 2157 |
Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter |
|
ASTM E 2158 |
Standard Specification for Dedicated Short Range Communication (DSRC) Physical Layer Using Microwave in the 902 to 928 MHz Band |
|
ASTM E 2166 |
Standard Practice for Organizing and Managing Building Data |
|
ASTM E 2167 |
Standard Guide for Selection and Use of Stone Consolidants |
|
ASTM E 2168 |
Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating |