|
ASTM A 551/A 551M |
Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications |
|
ASTM A 553/A 553M |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel |
|
ASTM A 554 |
Standard Specification for Welded Stainless Steel Mechanical Tubing |
|
ASTM A 555/A 555M |
Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods |
|
ASTM A 556/A 556M |
Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes |
|
ASTM A 560/A 560M |
Standard Specification for Castings, Chromium-Nickel Alloy |
|
ASTM A 561 |
Standard Practice for Macroetch Testing of Tool Steel Bars |
|
ASTM A 562/A 562M |
Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings |
|
ASTM A 563 REV A |
Standard Specification for Carbon and Alloy Steel Nuts |
|
ASTM A 563M |
Standard Specification for Carbon and Alloy Steel Nuts [Metric] |
|
ASTM A 564/A 564M |
Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
|
ASTM A 565/A 565M REV A |
Standard Specification for Martensitic Stainless Steel Bars for High- Temperature Service |
|
ASTM A 568/A 568M REV A |
Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
|
ASTM A 571/A 571M |
Standard Specification for Austenitic Ductile Iron Castings for Pressure- Containing Parts Suitable for Low-Temperature Service |
|
ASTM A 572/A 572M |
Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel-AASHTO No.: M223 |
|
ASTM A 573/A 573M |
Standard Specification for Structural Carbon Steel Plates of Improved Toughness |
|
ASTM A 574 |
Standard Specification for Alloy Steel Socket-Head Cap Screws |
|
ASTM A 574M |
Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric] |
|
ASTM A 575 |
Standard Specification for Steel Bars, Carbon, Merchant Quality, M- Grades |
|
ASTM A 576 REV B |
Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality |
|
ASTM A 577/A 577M |
Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates |
|
ASTM A 578/A 578M |
Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications |
|
ASTM A 579/A 579M REV A |
Standard Specification for Superstrength Alloy Steel Forgings |
|
ASTM A 580/A 580M |
Standard Specification for Stainless Steel Wire |
|
ASTM A 581/A 581M REV B |
Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods |
|
ASTM A 582/A 582M |
Standard Specification for Free-Machining Stainless Steel Bars |
|
ASTM A 586 REV A |
Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand |
|
ASTM A 587 |
Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry |
|
ASTM A 588/A 588M |
Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance-AASHTO No.: M 222 |
|
ASTM A 589 |
Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe |
|
ASTM A 591/A 591M |
Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight (Mass) Applications |
|
ASTM A 592/A 592M |
Standard Specification for High-Strength Quenched and Tempered Low- Alloy Steel Forged Fittings and Parts for Pressure Vessels |
|
ASTM A 595 REV A |
Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use |
|
ASTM A 596/A 596M |
Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens |
|
ASTM A 597 |
Standard Specification for Cast Tool Steel |
|
ASTM A 598/A 598M |
Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores |
|
ASTM A 599/A 599M |
Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold- Rolled Sheet |
|
ASTM A 6/A 6M REV A |
Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling |
|
ASTM A 600 REV A |
Standard Specification for Tool Steel High Speed |
|
ASTM A 601 |
Standard Specification for Electrolytic Manganese Metal |
|
ASTM A 602 |
Standard Specification for Automotive Malleable Iron Castings |
|
ASTM A 603 |
Standard Specification for Zinc-Coated Steel Structural Wire Rope |
|
ASTM A 604 |
Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets |
|
ASTM A 606 |
Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance |
|
ASTM A 608/A 608M |
Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High- Alloy Tubing for Pressure Application at High Temperatures |
|
ASTM A 609/A 609M |
Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof |
|
ASTM A 610 |
Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size |
|
ASTM A 612/A 612M |
Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service |
|
ASTM A 615/A 615M REV A |
Standard Specification for Deformed and Plain Carbon Steel Bars for Concrete Reinforcement-AASHTO No.: M 31 |
|
ASTM A 618/A 618M |
Standard Specification for Hot-Formed Welded and Seamless High- Strength Low-Alloy Structural Tubing |
|
ASTM A 623 |
Standard Specification for Tin Mill Products, General Requirements |
|
ASTM A 623M |
Standard Specification for Tin Mill Products, General Requirements [Metric] |
|
ASTM A 624/A 624M |
Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced |
|
ASTM A 625/A 625M |
Standard Specification for Tin Mill Products, Black Plate, Single- Reduced |
|
ASTM A 626/A 626M |
Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced |
|
ASTM A 630 |
Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate |
|
ASTM A 632 |
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service |
|
ASTM A 633/A 633M |
Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates |
|
ASTM A 635/A 635M |
Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High- Strength Low-Alloy with Improved Formability, General Requirements for |
|
ASTM A 636 |
Standard Specification for Nickel Oxide Sinter |
|
ASTM A 638/A 638M |
Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service |
|
ASTM A 640 |
Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable |
|
ASTM A 641/A 641M |
Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire |
|
ASTM A 644 |
Standard Terminology Relating to Iron Castings |
|
ASTM A 645/A 645M |
Standard Specification for Pressure Vessel Plates, 5 % and 5 1.2 % Nickel Alloy Steels, Specially Heat Treated |
|
ASTM A 646/A 646M |
Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings |
|
ASTM A 648 REV A |
Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe |
|
ASTM A 649/A 649M |
Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery |
|
ASTM A 65 |
Standard Specification for Steel Track Spikes |
|
ASTM A 650/A 650M |
Standard Specification for Tin Mill Products, Black Plate, Double Reduced |
|
ASTM A 653/A 653M REV A |
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
|
ASTM A 656/A 656M |
Standard Specification for Hot-Rolled Structural Steel, High-Strength Low- Alloy Plate with Improved Formability |
|
ASTM A 657/A 657M |
Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced |
|
ASTM A 659/A 659M |
Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled |
|
ASTM A 66 |
Standard Specification for Steel Screw Spikes |
|
ASTM A 660 |
Standard Specification for Centrifugally Cast Carbon Steel Pipe for High- Temperature Service |
|
ASTM A 662/A 662M |
Standard Specification for Pressure Vessel Plates, Carbon-Manganese- Silicon Steel, for Moderate and Lower Temperature Service |
|
ASTM A 663/A 663M |
Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties |
|
ASTM A 664 |
Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications |
|
ASTM A 666 |
Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
|
ASTM A 667/A 667M |
Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders |
|
ASTM A 668/A 668M |
Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use-AASHTO No.: M 102 |
|
ASTM A 67 |
Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot- Worked |
|
ASTM A 671 |
Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
|
ASTM A 672 |
Standard Specification for Electric-Fusion-Welded Steel Pipe for High- Pressure Service at Moderate Temperatures |
|
ASTM A 673/A 673M REV A |
Standard Specification for Sampling Procedure for Impact Testing of Structural Steel-AASHTO T 243 |
|
ASTM A 674 |
Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids |
|
ASTM A 675/A 675M |
Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties |
|
ASTM A 677 |
Standard Specification for Nonoriented Electrical Steel Fully Processed Types |
|
ASTM A 678/A 678M |
Standard Specification for Quenched-and-Tempered Carbon and High- Strength Low-Alloy Structural Steel Plates |
|
ASTM A 679/A 679M |
Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn |
|
ASTM A 681 |
Standard Specification for Tool Steels Alloy |
|
ASTM A 682/A 682M |
Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For |
|
ASTM A 683 |
Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types |
|
ASTM A 684/A 684M |
Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled |
|
ASTM A 686 |
Standard Specification for Tool Steel, Carbon |
|
ASTM A 688/A 688M |
Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes |
|
ASTM A 689 |
Standard Specification for Carbon and Alloy Steel Bars for Springs |
|
ASTM A 690/A 690M |
Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments |
|
ASTM A 691 |
Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion- Welded for High-Pressure Service at High Temperatures |
|
ASTM A 693 |
Standard Specification for Precipitation-Hardening Stainless and Heat- Resisting Steel Plate, Sheet, and Strip |
|
ASTM A 694/A 694M |
Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service |
|
ASTM A 696 REV A |
Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components |
|
ASTM A 697/A 697M |
Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods |
|
ASTM A 698/A 698M |
Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields |
|
ASTM A 700 |
Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment |
|
ASTM A 701 |
Standard Specification for Ferromanganese-Silicon |
|
ASTM A 702 |
Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought |
|
ASTM A 703/A 703M |
Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts |
|
ASTM A 704/A 704M |
Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement |
|
ASTM A 705/A 705M |
Standard Specification for Age-Hardening Stainless Steel Forgings |
|
ASTM A 706/A 706M REV A |
Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement |
|
ASTM A 707/A 707M |
Standard Specification for Forged Carbon and Alloy Steel Flanges for Low- Temperature Service |
|
ASTM A 709/A 709M |
Standard Specification for Structural Steel for Bridges |
|
ASTM A 710/A 710M |
Standard Specification for Precipitation-Strengthened Low-Carbon Nickel- Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates |
|
ASTM A 711 |
Standard Specification for Steel Forging Stock |
|
ASTM A 712 |
Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys |
|
ASTM A 713 |
Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
|
ASTM A 714 |
Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe |
|
ASTM A 716 |
Standard Specification for Ductile Iron Culvert Pipe |
|
ASTM A 717/A 717M |
Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens |
|
ASTM A 719/A 719M |
Standard Test Method for Lamination Factor of Magnetic Materials |
|
ASTM A 720/A 720M |
Standard Test Method for Ductility of Nonoriented Electrical Steel |
|
ASTM A 721/A 721M |
Standard Test Method for Ductility of Oriented Electrical Steel |
|
ASTM A 722/A 722M |
Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete |
|
ASTM A 723/A 723M |
Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application |
|
ASTM A 724/A 724M |
Standard Specification for Pressure Vessel Plates, Carbon-Manganese- Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels |
|
ASTM A 726 |
Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types |
|
ASTM A 727/A 727M |
Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness |
|
ASTM A 729/A 729M REV A |
Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service |
|
ASTM A 732/A 732M |
Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures |
|
ASTM A 733 |
Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples |
|
ASTM A 734/A 734M REV A |
Standard Specification for Pressure Vessel Plates, Alloy Steel and High- Strength Low-Alloy Steel, Quenched-and-Tempered |
|
ASTM A 735/A 735M |
Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service |
|
ASTM A 736/A 736M |
Standard Specification for Pressure Vessel Plates, Low-Carbon Age- Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese- Molybdenum-Columbium Alloy Steel |
|
ASTM A 737/A 737M |
Standard Specification for Pressure Vessel Plates, High-Strength, Low- Alloy Steel |
|
ASTM A 738/A 738M |
Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon- Manganese- Silicon Steel, for Moderate and Lower Temperature Service |
|
ASTM A 739 REV A |
Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both |
|
ASTM A 74 |
Standard Specification for Cast Iron Soil Pipe and Fittings-AASHTO No.: M263-77 |
|
ASTM A 740 |
Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) |
|
ASTM A 741 |
Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail |
|
ASTM A 742/A 742M |
Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe-AASHTO No.: M 246/M 246M |
|
ASTM A 743/A 743M |
Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application |
|
ASTM A 744/A 744M |
Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
|
ASTM A 745/A 745M |
Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings |
|
ASTM A 746 |
Standard Specification for Ductile Iron Gravity Sewer Pipe |
|
ASTM A 747/A 747M |
Standard Specification for Steel Castings, Stainless, Precipitation Hardening |
|
ASTM A 748/A 748M |
Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use |
|
ASTM A 749/A 749M |
Standard Specification for Steel, Strip, Carbon and High-Strength, Low- Alloy, Hot-Rolled, General Requirements for |
|
ASTM A 751 |
Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products |
|
ASTM A 752 |
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel |
|
ASTM A 752M |
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] |
|
ASTM A 753 |
Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) |
|
ASTM A 754/A 754M |
Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence |
|
ASTM A 755/A 755M |
Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
|
ASTM A 756 |
Standard Specification for Stainless Anti-Friction Bearing Steel |
|
ASTM A 757/A 757M |
Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service |
|
ASTM A 758/A 758M |
Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness |
|
ASTM A 759 |
Standard Specification for Carbon Steel Crane Rails |
|
ASTM A 760/A 760M REV A |
Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains-AASHTO No.: M 36/M 36M |
|
ASTM A 761/A 761M |
Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches-AASHTO No.: M 167/M 167M |
|
ASTM A 762/A 762M |
Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains-AASHTO No. M245/M245M |
|
ASTM A 763 |
Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels |
|
ASTM A 764 |
Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs |
|
ASTM A 765/A 765M |
Standard Specification for Carbon Steel and Low-Alloy Steel Pressure- Vessel-Component Forgings with Mandatory Toughness Requirements |
|
ASTM A 767/A 767M |
Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement |
|
ASTM A 768/A 768M |
Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
|
ASTM A 769/A 769M |
Standard Specification for Carbon and High-Strength Electric Resistance Welded Steel Structural Shapes |
|
ASTM A 770/A 770M |
Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications |
|
ASTM A 772/A 772M |
Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current |
|
ASTM A 773/A 773M |
Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs |
|
ASTM A 774/A 774M |
Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures |
|
ASTM A 775/A 775M REV A |
Standard Specification for Epoxy-Coated Steel Reinforcing Bars |
|
ASTM A 778 |
Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products |
|
ASTM A 779/A 779M |
Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete |
|
ASTM A 780 |
Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings |
|
ASTM A 781/A 781M REV A |
Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A 782/A 782M |
Standard Specification for Pressure-Vessel Plates, Quenched-and- Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel |
|
ASTM A 786/A 786M |
Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates |
|
ASTM A 787 |
Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing |
|
ASTM A 788/A 788M REV C |
Standard Specification for Steel Forgings, General Requirements |
|
ASTM A 789/A 789M REV B |
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
|
ASTM A 790/A 790M REV B |
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
|
ASTM A 792/A 792M |
Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
|
ASTM A 793 |
Standard Specification for Rolled Floor Plate, Stainless Steel |
|
ASTM A 794 |
Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled |
|
ASTM A 795/A 795M |
Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use |
|
ASTM A 796/A 796M REV A |
Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications |
|
ASTM A 798/A 798M |
Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications |
|
ASTM A 799/A 799M |
Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content |
|
ASTM A 800/A 800M |
Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof |
|
ASTM A 801 |
Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650) |
|
ASTM A 802/A 802M |
Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination |
|
ASTM A 803/A 803M |
Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes |
|
ASTM A 804/A 804M |
Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens |
|
ASTM A 805 |
Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled |
|
ASTM A 807/A 807M |
Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications |
|
ASTM A 809 |
Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire |
|
ASTM A 810 |
Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh |
|
ASTM A 811 |
Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques |
|
ASTM A 813/A 813M |
Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe |
|
ASTM A 814/A 814M |
Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe |
|
ASTM A 815/A 815M |
Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
|
ASTM A 817 |
Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire |
|
ASTM A 818 |
Standard Specification for Coppered Carbon Steel Wire |
|
ASTM A 82/A 82M REV A |
Standard Specification for Steel Wire, Plain, for Concrete Reinforcement- AASHTO Standard AASHTO No. M 32 |
|
ASTM A 820/A 820M |
Standard Specification for Steel Fibers for Fiber-Reinforced Concrete |
|
ASTM A 821/A 821M |
Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks |
|
ASTM A 822/A 822M |
Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service |
|
ASTM A 823 |
Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
|
ASTM A 824 |
Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use with Chain Link Fence |
|
ASTM A 827/A 827M |
Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications |
|
ASTM A 829/A 829M |
Standard Specification for Alloy Structural Steel Plates |
|
ASTM A 830/A 830M |
Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements |
|
ASTM A 832/A 832M |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Molybdenum-Vanadium |
|
ASTM A 833 |
Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers |
|
ASTM A 834 |
Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
|
ASTM A 835/A 835M |
Standard Specification for Sizes of Ferroalloys and Alloy Additives |
|
ASTM A 836/A 836M |
Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service |
|
ASTM A 837/A 837M |
Standard Specification for Steel Forgings, Alloy, for Carburizing Applications |
|
ASTM A 838 |
Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications |
|
ASTM A 839 |
Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications |
|
ASTM A 841/A 841M REV A |
Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP) |
|
ASTM A 842 |
Standard Specification for Compacted Graphite Iron Castings |
|
ASTM A 844/A 844M |
Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process |
|
ASTM A 847/A 847M |
Standard Specification for Cold-Formed Welded and Seamless High- Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance |
|
ASTM A 848 |
Standard Specification for Low-Carbon Magnetic Iron |
|
ASTM A 849 |
Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe |
|
ASTM A 852/A 852M |
Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi (485 MPa) Minimum Yield Strength to 4 in. (100 mm) Thick |
|
ASTM A 853 |
Standard Specification for Steel Wire, Carbon, for General Use |
|
ASTM A 854/A 854M |
Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire |
|
ASTM A 855/A 855M |
Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand |
|
ASTM A 856/A 856M |
Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
|
ASTM A 857/A 857M |
Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage |
|
ASTM A 858/A 858M |
Standard Specification for Heat-Treated Carbon Steel Fittings for Low- Temperature and Corrosive Service |
|
ASTM A 859/A 859M |
Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components |
|
ASTM A 860/A 860M |
Standard Specification for Wrought High-Strength Low-Alloy Steel Butt- Welding Fittings |
|
ASTM A 861 |
Standard Specification for High-Silicon Iron Pipe and Fittings |
|
ASTM A 862/A 862M |
Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe |
|
ASTM A 865 |
Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
|
ASTM A 866 |
Standard Specification for Medium Carbon Anti-Friction Bearing Steel |
|
ASTM A 867 |
Standard Specification for Iron-Silicon Relay Steels |
|
ASTM A 871/A 871M |
Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Atmospheric Corrosion Resistance |
|
ASTM A 872/A 872M |
Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments |
|
ASTM A 874/A 874M |
Standard Specification for Ferritic Ductile Iron Castings Suitable for Low- Temperature Service |
|
ASTM A 875/A 875M |
Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process |
|
ASTM A 876 |
Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types-Replaces A665, A725, and A843 |
|
ASTM A 877/A 877M |
Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality |
|
ASTM A 878/A 878M |
Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality |
|
ASTM A 879/A 879M |
Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface |
|
ASTM A 881/A 881M |
Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low- Relaxation for Prestressed Concrete Railroad Ties |
|
ASTM A 882/A 882M REV A |
Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand |
|
ASTM A 883/A 883M |
Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials |
|
ASTM A 884/A 884M |
Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement |
|
ASTM A 885/A 885M |
Standard Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe |
|
ASTM A 886/A 886M |
Standard Specification for Steel Strand, Indented, Seven-Wire Stress- Relieved for Prestressed Concrete |
|
ASTM A 887 |
Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application |
|
ASTM A 888 |
Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications |
|
ASTM A 889/A 889M |
Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame |
|
ASTM A 890/A 890M |
Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application |
|
ASTM A 891 |
Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels |
|
ASTM A 892 |
Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels |
|
ASTM A 893/A 893M |
Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies |
|
ASTM A 894/A 894M |
Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials |
|
ASTM A 895 |
Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip |
|
ASTM A 896 |
Standard Practice for Conducting Case Studies on Galvanized Structures |
|
ASTM A 898/A 898M |
Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes |
|
ASTM A 899 |
Standard Specification for Steel Wire, Epoxy-Coated |
|
ASTM A 90/A 90M |
Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings |
|
ASTM A 900/A 900M |
Standard Test Method for Lamination Factor of Amorphous Magnetic Strip |
|
ASTM A 901 |
Standard Specification for Amorphous Magnetic Core Alloys, Semi- Processed Types |
|
ASTM A 902 REV A |
Standard Terminology Relating to Metallic Coated Steel Products |
|
ASTM A 903/A 903M |
Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection |
|
ASTM A 904 |
Standard Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Parts |
|
ASTM A 905 |
Standard Specification for Steel Wire, Pressure Vessel Winding |
|
ASTM A 906/A 906M |
Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting |
|
ASTM A 908 |
Standard Specification for Stainless Steel Needle Tubing |
|
ASTM A 909 |
Standard Specification for Steel Forgings, Microalloy, for General Industrial Use |
|
ASTM A 910/A 910M |
Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete |
|
ASTM A 911/A 911M |
Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Railroad Ties |
|
ASTM A 912/A 912M |
Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens |
|
ASTM A 913/A 913M |
Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST) |
|
ASTM A 914/A 914M |
Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements |
|
ASTM A 915/A 915M |
Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades |
|
ASTM A 917 |
Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements) |
|
ASTM A 918 |
Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface |
|
ASTM A 920/A 920M REV A |
Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
|
ASTM A 921/A 921M |
Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging |
|
ASTM A 922 |
Standard Specification for Silicon Metal |
|
ASTM A 923 |
Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels |
|
ASTM A 924/A 924M |
Standard Specification for General Requirements for Steel Sheet, Metallic- Coated by the Hot-Dip Process |
|
ASTM A 925 |
Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand |
|
ASTM A 926 |
Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe |
|
ASTM A 927/A 927M |
Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method |
|
ASTM A 928/A 928M |
Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal |
|
ASTM A 929/A 929M |
Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe |
|
ASTM A 930 |
Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits |
|
ASTM A 931 |
Standard Test Method for Tension Testing of Wire Ropes and Strand |
|
ASTM A 932/A 932M |
Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens |
|
ASTM A 933/A 933M |
Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement |
|
ASTM A 934/A 934M |
Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars |