|
ASTM E 1496 |
Standard Test Method for Neutron Radiographic Dimensional Measurements |
|
ASTM E 1504 |
Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS) |
|
ASTM E 1505 |
Standard Guide for Determining SIMS Relative Sensitivity Factors from Ion Implanted External Standards |
|
ASTM E 1507 |
Standard Guide for Describing and Specifying the Spectrometer of an Optical Emission Direct-Reading Instrument |
|
ASTM E 1508 |
Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy |
|
ASTM E 1510 |
Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs |
|
ASTM E 1511 |
Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography |
|
ASTM E 1523 |
Standard Guide to Charge Control and Charge Referencing Techniques in X- Ray Photoelectron Spectroscopy |
|
ASTM E 1543 |
Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems |
|
ASTM E 1544 |
Standard Practice for Construction of a Stepped Block and Its Use to Estimate Errors Produced by Speed-of-Sound Measurement Systems for Use on Solids |
|
ASTM E 155 |
Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings |
|
ASTM E 1552 |
Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys Using D-C Argon Plasma Spectrometer |
|
ASTM E 1558 |
Standard Guide for Electrolytic Polishing of Metallographic Specimens |
|
ASTM E 1561 |
Standard Practice for Analysis of Strain Gage Rosette Data |
|
ASTM E 1568 |
Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry |
|
ASTM E 1569 |
Standard Test Method for Determination of Oxygen in Tantalum Powder |
|
ASTM E 1571 |
Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
|
ASTM E 1577 |
Standard Guide for Reporting of Ion Beam Parameters Used in Surface Analysis |
|
ASTM E 1578 |
Standard Guide for Laboratory Information Management Systems (LIMS) |
|
ASTM E 1587 |
Standard Test Methods for Chemical Analysis of Refined Nickel |
|
ASTM E 159 |
Standard Test Method for Hydrogen Loss of Cobalt, Copper, Tungsten, and Iron Powders |
|
ASTM E 1600 |
Standard Test Method for Determination of Gold in Cyanide Solutions by Atomic Absorption Spectrometry |
|
ASTM E 1601 |
Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
|
ASTM E 1606 |
Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes |
|
ASTM E 1621 |
Standard Guide for X-Ray Emission Spectrometric Analysis |
|
ASTM E 1622 |
Standard Practice for Correction of Spectral Line Overlap in Wavelength- Dispersive X-Ray Spectrometry-E1 |
|
ASTM E 1629 |
Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes |
|
ASTM E 1634 |
Standard Guide for Performing Sputter Crater Depth Measurements |
|
ASTM E 1635 |
Standard Practice for Reporting Imaging Data in Secondary Ion Mass Spectrometry (SIMS) |
|
ASTM E 1636 |
Standard Practice for Analytically Describing Sputter-Depth-Profile Interface Data by an Extended Logistic Function |
|
ASTM E 164 |
Standard Practice for Ultrasonic Contact Examination of Weldments |
|
ASTM E 1647 |
Standard Practice for Determining Contrast Sensitivity in Radiology |
|
ASTM E 1648 |
Standard Reference Radiographs for Examination of Aluminum Fusion Welds |
|
ASTM E 165 |
Standard Test Method for Liquid Penetrant Examination |
|
ASTM E 1657 |
Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography |
|
ASTM E 1659 |
Standard Test Methods for Coating Weight and Chemical Analysis of Zinc- Nickel Alloy Electrolytically Coated on Steel Sheet |
|
ASTM E 1672 |
Standard Guide for Computed Tomography (CT) System Selection |
|
ASTM E 1681 |
Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
|
ASTM E 1683 |
Standard Practice for Testing the Performance of Scanning Raman Spectrometers |
|
ASTM E 1685 |
Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique |
|
ASTM E 1691 |
Standard Guide for Evaluation and Assessment of Analytical Chemistry Laboratories |
|
ASTM E 1695 |
Standard Test Method for Measurement of Computed Tomography (CT) System Performance |
|
ASTM E 1698 |
Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography |
|
ASTM E 1724 |
Standard Guide for Testing and Certification of Metal, Ore, and Metal- Related Reference Materials |
|
ASTM E 1734 |
Standard Practice for Radioscopic Examination of Castings |
|
ASTM E 1735 |
Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MV |
|
ASTM E 1736 |
Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels |
|
ASTM E 1742 |
Standard Practice for Radiographic Examination |
|
ASTM E 1747 |
Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications |
|
ASTM E 1761 |
Standard Guide for Recommended Formats for Data Records Used in Computerization of Fatigue and Fracture Data of Metals |
|
ASTM E 1763 |
Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods |
|
ASTM E 1770 |
Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment |
|
ASTM E 1771 |
Standard Test Method for Determination of Copper in Anode and Blister Copper |
|
ASTM E 1774 |
Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
|
ASTM E 1781 |
Standard Practice for Secondary Calibration of Acoustic Emission Sensors |
|
ASTM E 18 |
Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials |
|
ASTM E 1805 |
Standard Test Method for Fire Assay Determination of Gold in Copper Concentrates by Gravimetry |
|
ASTM E 1806 |
Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
|
ASTM E 1813 |
Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy |
|
ASTM E 1814 |
Standard Practice for Computed Tomographic (CT) Examination of Castings |
|
ASTM E 1816 |
Standard Practice for Ultrasonic Examinations Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
|
ASTM E 1817 |
Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
|
ASTM E 1829 |
Standard Guide for Handling Specimens Prior to Surface Analysis |
|
ASTM E 1833 |
Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition |
|
ASTM E 1834 |
Standard Test Method for Determination of Lead in Nickel Alloys by Electrothermal Atomic Absorption Spectrometric Method |
|
ASTM E 1835 |
Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry |
|
ASTM E 1852 |
Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Electrothermal Atomic Absorption Spectrometry |
|
ASTM E 1856 |
Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines |
|
ASTM E 186 |
Standard Reference Radiographs for Heavy-Walled (2 to 4 1/2-in. (51 to 114- mm)) Steel Castings |
|
ASTM E 1862 |
Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers |
|
ASTM E 1875 |
Standard Test Method for Dynamic Young´s Modulus, Shear Modulus, and Poisson´s Ratio by Sonic Resonance |
|
ASTM E 1876 |
Standard Test Method for Dynamic Young´s Modulus, Shear Modulus, and Poisson´s Ratio by Impulse Excitation of Vibration |
|
ASTM E 1880 |
Standard Practice for Tissue Cryosection Analysis with SIMS |
|
ASTM E 1881 |
Standard Guide for Cell Culture Analysis with SIMS |
|
ASTM E 1888/E 1888M |
Standard Test Method for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced with Balsa Wood Cores |
|
ASTM E 1897 |
Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers |
|
ASTM E 1898 |
Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry |
|
ASTM E 190 |
Standard Test Method for Guided Bend Test for Ductility of Welds |
|
ASTM E 1901 |
Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods |
|
ASTM E 1914 |
Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis |
|
ASTM E 1915 |
Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry |
|
ASTM E 1916 |
Standard Guide for Identification and/or Segregation of Mixed Lots of Metals |
|
ASTM E 1917 |
Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by the Phosphovanadomolybdate Molecular Absorption Spectrometric Method |
|
ASTM E 192 |
Standard Reference Radiographs for Investment Steel Castings of Aerospace Applications |
|
ASTM E 1920 |
Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings |
|
ASTM E 1921 |
Standard Test Method for Determination of Reference Temperature, To , for Ferritic Steels in the Transition Range |
|
ASTM E 1922 |
Standard Test Method for Translaminar Fracture Toughness of Laminated Polymer Matrix Composite Materials |
|
ASTM E 1928 |
Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-Walled Tubing |
|
ASTM E 1930 |
Standard Test Method for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission |
|
ASTM E 1931 |
Standard Guide for X-Ray Compton Scatter Tomography |
|
ASTM E 1932 |
Standard Guide for Acoustic Emission Examination of Small Parts |
|
ASTM E 1933 REV A |
Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers |
|
ASTM E 1934 REV A |
Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography |
|
ASTM E 1935 |
Standard Test Method for Calibrating and Measuring CT Density |
|
ASTM E 1936 |
Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems |
|
ASTM E 1937 |
Standard Test Method for Determination of Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique |
|
ASTM E 1938 |
Standard Test Method for Determination of Titanium in Nickel Alloys by the Diantipyrylmethane Molecular Absorption Spectrometric Method |
|
ASTM E 194 |
Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders |
|
ASTM E 1941 |
Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys |
|
ASTM E 1942 |
Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing |
|
ASTM E 1947 |
Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data |
|
ASTM E 1948 |
Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data |
|
ASTM E 1949 |
Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages |
|
ASTM E 1950 |
Standard Practice for Reporting Results from Methods of Chemical Analysis |
|
ASTM E 1951 |
Standard Guide for Calibrating Reticles and Light Microscope Magnifications |
|
ASTM E 1955 |
Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs |
|
ASTM E 1961 |
Standard Practice for Mechanized Ultrasonic Examination of Girth Welds Using Zonal Discrimination with Focused Search Units |
|
ASTM E 1962 |
Standard Test Method for Ultrasonic Surface Examinations Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
|
ASTM E 1964 |
Standard Practice for Compiling and Writing & Terminology |
|
ASTM E 1989 |
Standard Specification for Laboratory Equipment Control Interface (LECIS) |
|
ASTM E 1992 REV B |
Standard Terminology Relating to Terminology Management |
|
ASTM E 1999 |
Standard Test Method for Analysis of Cast Iron Using Optical Emission Spectrometry |
|
ASTM E 2001 |
Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-Metallic Parts |
|
ASTM E 2002 |
Standard Practice for Determining Total Image Unsharpness in Radiology |
|
ASTM E 2003 |
Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators |
|
ASTM E 2007 |
Standard Guide for Computed Radiology (Photostimulable Luminescence (PSL) Method) |
|
ASTM E 2014 |
Standard Guide on Metallographic Laboratory Safety |
|
ASTM E 2015 |
Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination |
|
ASTM E 2023 |
Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators |
|
ASTM E 2024 |
Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector |
|
ASTM E 2027 |
Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials |
|
ASTM E 2028 |
Standard Practice for Receiving, Testing and Reporting Results of Investigation of Metal, Ore, or Metal Related Samples That Are or May Be Involved in Litigation |
|
ASTM E 2033 |
Standard Practice for Computed Radiology (Photostimulable Luminescence Method) |
|
ASTM E 2050 |
Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method |
|
ASTM E 2053 |
Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Metals, Ores, and Related Materials |
|
ASTM E 2055 |
Standard Practice for Referencing Test Methods for Chemical Analysis of Metals and Related Materials |
|
ASTM E 2066 |
Standard Guide for Validation of Laboratory Information Management Systems |
|
ASTM E 2075 |
Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod |
|
ASTM E 2076 |
Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
|
ASTM E 2077 |
Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data |
|
ASTM E 2078 |
Standard Guide for Analytical Data Interchange Protocol for Mass Spectrometric Data |
|
ASTM E 208 REV A |
Standard Test Method for Conducting Drop-Weight Test to Determine Nil- Ductility Transition Temperature of Ferritic Steels |
|
ASTM E 209 |
Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates |
|
ASTM E 2093 |
Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization |
|
ASTM E 2096 |
Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
|
ASTM E 21 |
Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials |
|
ASTM E 2104 |
Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components |
|
ASTM E 2108 |
Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer |
|
ASTM E 2109 |
Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings |
|
ASTM E 213 |
Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing |
|
ASTM E 214 |
Standard Practice for Immersed Ultrasonic Testing by the Reflection Method Using Pulsed Longitudinal Waves |
|
ASTM E 2142 |
Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope |
|
ASTM E 215 |
Standard Practice for Standardizing Equipment for Electromagnetic Examination of Seamless Aluminum-Alloy Tube |
|
ASTM E 2165 |
Standard Practice for Establishing an Uncertainty Budget for the Chemical Analysis of Metals, Ores, and Related Materials |
|
ASTM E 2191 |
Standard Test Method for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission |
|
ASTM E 2192 |
Standard Guide for Planar Flaw Height Sizing by Ultrasonics |
|
ASTM E 2207 |
Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens |
|
ASTM E 2208 |
Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems |
|
ASTM E 2209 |
Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry |
|
ASTM E 2218 |
Standard Test Method for Determining Forming Limit Curves |
|
ASTM E 2223 |
Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics |
|
ASTM E 2242 |
Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure |
|
ASTM E 2244 |
Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer |
|
ASTM E 2245 |
Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer |
|
ASTM E 2246 |
Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer |
|
ASTM E 2261 |
Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique |
|
ASTM E 2274 |
Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants |
|
ASTM E 2283 |
Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features |
|
ASTM E 2293 |
Standard Practice for Drying of Metal Bearing Ores, Concentrates and Related Metallurgical Materials for the Determination of Mercury |
|
ASTM E 2294 |
Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry |
|
ASTM E 2295 |
Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels |
|
ASTM E 2296 |
Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry |
|
ASTM E 2297 |
Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods |
|
ASTM E 23 |
Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
|
ASTM E 2309 |
Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines |
|
ASTM E 2310 |
Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-infrared Spectroscopy |
|
ASTM E 2337 |
Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing1 |
|
ASTM E 2338 |
Standard Practice for Characterization of Coatings Using Conformable Eddy- Current Sensors without Coating Reference Standards |
|
ASTM E 2339 |
Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) |
|
ASTM E 2367 |
Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter |
|
ASTM E 2368 |
Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
|
ASTM E 2371 |
Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry |
|
ASTM E 2373 |
Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique |
|
ASTM E 2374 |
Standard Guide for Acoustic Emission System Performance Verification |
|
ASTM E 2375 |
Standard Practice for Ultrasonic Examination of Wrought Products |
|
ASTM E 238 |
Standard Test Method for Pin-Type Bearing Test of Metallic Materials |
|
ASTM E 2382 |
Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy |
|
ASTM E 2410 |
Standard Practice for Designing and Validating Performance Based Test Methods for the Analysis of Metals, Ores, and Related Materials |
|
ASTM E 2412 |
Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry |
|
ASTM E 2413 |
Standard Guide for Hospital Preparedness and Response |
|
ASTM E 2414 |
Standard Test Method for Quantitative Sporicidal Three-Step Method (TSM) to Determine Sporicidal Efficacy of Liquids, Liquid Sprays, and Vapor or Gases on Contaminated Carrier Surfaces |
|
ASTM E 2422 |
Standard Digital Reference Images for Inspection of Aluminum Castings |
|
ASTM E 243 |
Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes |
|
ASTM E 2437 |
Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials |
|
ASTM E 2438 |
Standard Practice for Implementing Standard Performance Based Test Methods for the Analysis of Metals, Ores, and Related Materials |
|
ASTM E 2443 |
Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets |
|
ASTM E 2445 |
Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems |
|
ASTM E 2446 |
Standard Practice for Classification of Computed Radiology Systems |
|
ASTM E 2448 |
Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials |
|
ASTM E 246 |
Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titration |
|
ASTM E 247 |
Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry |
|
ASTM E 248 |
Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry |
|
ASTM E 251 |
Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages |
|
ASTM E 252 |
Standard Test Method for Thickness of Thin Foil, Sheet and Film by Mass Measuerment |
|
ASTM E 255 |
Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition |
|
ASTM E 260 |
Standard Practice for Packed Column Gas Chromatography |
|
ASTM E 272 |
Standard Reference Radiographs for High-Strength Copper-Base and Nickel- Copper Alloy Castings |
|
ASTM E 273 |
Standard Practice for Ultrasonic Examination of the Weld Zone of Welded Pipe and Tubing |
|
ASTM E 276 |
Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75- mm) Sieve and Finer for Metal-Bearing Ores and Related Materials |
|
ASTM E 278 |
Standard Test Method for the Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry |
|
ASTM E 279 |
Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test |
|
ASTM E 280 |
Standard Reference Radiographs for Heavy-Walled (4 1/2 to 12-in. (114 to 305-mm)) Steel Castings |
|
ASTM E 290 REV A |
Standard Test Methods for Bend Testing of Material for Ductility |
|
ASTM E 292 |
Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials |
|
ASTM E 3 |
Standard Practice for Preparation of Metallographic Specimens |
|
ASTM E 309 |
Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation |
|
ASTM E 310 |
Standard Reference Radiographs for Tin Bronze Castings |
|
ASTM E 314 |
Standard Test Methods for Manganese in Iron Ores |
|
ASTM E 315 |
Standard Test Methods for Chemical Analysis of Molybdenum |
|
ASTM E 316 |
Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titration |
|
ASTM E 317 |
Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Examination Instruments and Systems without the Use of Electronic Measurement Instruments |
|
ASTM E 32 |
Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition |
|
ASTM E 322 |
Standard Test Method for X-Ray Emission Spectrometric Analysis of Low- Alloy Steels and Cast Irons |
|
ASTM E 328 |
Standard Test Methods for Stress Relaxation for Materials and Structures |
|
ASTM E 338 |
Standard Test Method of Sharp-Notch Tension Testing of High-Strength Sheet Materials |
|
ASTM E 34 |
Standard Test Methods for Chemical Analysis of Aluminum and Aluminum- Base Alloys |
|
ASTM E 340 |
Standard Test Method for Macroetching Metals and Alloys |
|
ASTM E 342 |
Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry |
|
ASTM E 345 |
Standard Test Methods of Tension Testing of Metallic Foil |
|
ASTM E 35 |
Standard Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys |
|
ASTM E 350 |
Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron |
|
ASTM E 351 |
Standard Test Methods for Chemical Analysis of Cast Iron - All Types |
|
ASTM E 352 |
Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels |
|
ASTM E 353 |
Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
|
ASTM E 354 |
Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
|
ASTM E 355 |
Standard Practice for Gas Chromatography Terms and Relationships |
|
ASTM E 360 |
Standard Test Methods for Chemical Analysis of Silicon and Ferrosilicon |
|
ASTM E 363 |
Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium |
|
ASTM E 364 |
Standard Test Methods for Chemical Analysis of Ferrochrome- Silicon |
|
ASTM E 367 |
Standard Methods for Chemical Analysis of Ferroniobium |
|
ASTM E 37 |
Standard Test Methods for Chemical Analysis of Pig Lead |
|
ASTM E 371 |
Standard Test Method for the Determination of Boron in Ferroboron |
|
ASTM E 372 |
Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon |
|
ASTM E 376 |
Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Examination Methods |
|
ASTM E 381 |
Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings |
|
ASTM E 382 |
Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets |
|
ASTM E 384 REV A |
Standard Test Method for Microindentation Hardness of Materials |
|
ASTM E 386 |
Standard Practice for Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy |
|
ASTM E 387 |
Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method |
|
ASTM E 388 |
Standard Test Method for Wavelength Accuracy of Spectral Bandwidth of Fluorescence Spectrometers |
|
ASTM E 389 |
Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75- mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials |
|
ASTM E 395 |
Standard Test Method for Total Sulfur in Iron Ores and Related Materials by Combustion-Iodate Titration |
|
ASTM E 396 |
Standard Test Methods for Chemical Analysis of Cadmium |
|
ASTM E 399 |
Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials |
|
ASTM E 4 |
Standard Practices for Force Verification of Testing Machines-AASHTO No: T67 |
|
ASTM E 400 |
Standard Test Method for Analysis of Ores, Minerals, and Rocks by Fire Assay Preconcentration Atomic Emission Spectrometry |
|
ASTM E 402 |
Standard Test Method for Spectrographic Analysis of Uranium Oxide (U3O8) by Gallium Oxide-Carrier Technique |
|
ASTM E 404 |
Standard Test Method for Spectrographic Determination of Boron In Carbon and LowAlloy Steel by the Point-To-Plane Technique |
|
ASTM E 406 |
Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis |
|
ASTM E 407 |
Standard Practice for Microetching Metals and Alloys |
|
ASTM E 415 REV A |
Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel |
|
ASTM E 426 |
Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys |
|
ASTM E 427 |
Standard Practice for Testing for Leaks Using the Halogen Leak Detector (Alkali-Ion Diode) |
|
ASTM E 428 REV A |
Standard Practice for Fabrication and Control of Metal, Other than Aluminum Reference, Blocks Used in Ultrasonic Examination |
|
ASTM E 431 |
Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices |
|
ASTM E 432 |
Standard Guide for Selection of a Leak Testing Method |
|
ASTM E 433 |
Standard Reference Photographs for Liquid Penetrant Inspection |
|
ASTM E 436 |
Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels |
|
ASTM E 439 REV A |
Standard Test Methods for Chemical Analysis of Beryllium |
|
ASTM E 446 |
Standard Reference Radiographs for Steel Castings up to 2 in. (51 mm) in Thickness |
|
ASTM E 448 |
Standard Practice for Scleroscope Hardness Testing of Metallic Materials |
|
ASTM E 45 |
Standard Test Methods for Determining the Inclusion Content of Steel |
|
ASTM E 463 |
Standard Test Method for Silica in Fluorspar by the Silico-Molybdate Visible Spectrometry |
|
ASTM E 465 |
Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titration |
|
ASTM E 466 |
Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials |
|
ASTM E 467 REV A |
Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System |
|
ASTM E 468 |
Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials |
|
ASTM E 478 |
Standard Test Methods for Chemical Analysis of Copper Alloys |
|
ASTM E 479 |
Standard Guide for Preparation of a Leak Testing Specification |
|
ASTM E 485 |
Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-To-Plane Technique |
|
ASTM E 493 |
Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
|
ASTM E 494 |
Standard Practice for Measuring Ultrasonic Velocity in Materials |
|
ASTM E 498 |
Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
|
ASTM E 499 |
Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode |
|
ASTM E 50 |
Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
|
ASTM E 505 |
Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings |
|
ASTM E 507 |
Standard Test Method for Aluminum in Iron Ores by Atomic Absorption Spectrometry |
|
ASTM E 508 |
Standard Test Method for Calcium and Magnesium in Iron Ores by Atomic Absorption Spectrometry |
|
ASTM E 515 |
Standard Test Method for Leaks Using Bubble Emission Techniques |
|
ASTM E 516 REV A |
Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography |
|
ASTM E 517 |
Standard Test Method for Plastic Strain Ratio r for Sheet Metal |
|
ASTM E 520 |
Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectroscopy |
|
ASTM E 527 |
Standard Practice for Numbering Metals and Alloys (UNS) |
|
ASTM E 53 |
Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry |
|
ASTM E 536 |
Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys |
|
ASTM E 539 |
Standard Test Method for X-Ray Emission Spectrometric Analysis of 6AI-4V Titanium Alloy |
|
ASTM E 543 |
Standard Practice for Agencies Performing Nondestructive Testing |
|
ASTM E 545 |
Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination |
|
ASTM E 55 |
Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition |
|
ASTM E 561 |
Standard Test Method for K-R Curve Determination |
|
ASTM E 562 |
Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count |
|
ASTM E 566 |
Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals |
|
ASTM E 569 |
Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation |
|
ASTM E 570 |
Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products |
|
ASTM E 571 |
Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products |
|
ASTM E 572 REV A |
Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry |
|
ASTM E 581 |
Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys |
|
ASTM E 587 |
Standard Practice for Ultrasonic Angle-Beam Examination by the Contact Method |
|
ASTM E 588 |
Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
|
ASTM E 592 |
Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. (6 to 51 mm) Thick with X Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60 |
|
ASTM E 594 |
Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography |
|
ASTM E 6 |
Standard Terminology Relating to Methods of Mechanical Testing |
|
ASTM E 60 |
Standard Practice for Analysis of Metals, Ores, and Related Materials by Molecular Absorption Spectrometry |
|
ASTM E 602 |
Standard Test Method for Sharp-Notch Tension Testing with Cylindrical Specimens |
|
ASTM E 604 |
Standard Test Method for Dynamic Tear Testing of Metallic Materials |
|
ASTM E 606 |
Standard Practice for Strain-Controlled Fatigue Testing |
|
ASTM E 607 |
Standard Test Method for Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere |
|
ASTM E 618 |
Standard Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine |
|
ASTM E 62 |
Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods) |
|
ASTM E 633 |
Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800 Degrees F (1000 Degrees C) in Air |
|
ASTM E 634 |
Standard Practice for Sampling of Zinc and Zinc Alloys for Optical Emission Spectrometric Analysis |
|
ASTM E 643 |
Standard Test Method for Ball Punch Deformation of Metallic Sheet Material |
|
ASTM E 646 |
Standard Test Method for Tensile Strain-Hardening Exponents (n-Values) of Metallic Sheet Materials |
|
ASTM E 647 |
Standard Test Method for Measurement of Fatigue Crack Growth Rates |
|
ASTM E 650 |
Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors |
|
ASTM E 664 |
Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method |
|
ASTM E 673 |
Standard Terminology Relating to Surface Analysis |
|
ASTM E 682 |
Standard Practice for Liquid Chromatography Terms and Relationships |
|
ASTM E 684 |
Standard Practice for Approximate Determination of Current Density of Large- Diameter Ion Beams for Sputter Depth Profiling of Solid Surfaces |
|
ASTM E 685 |
Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography |
|
ASTM E 689 |
Standard Reference Radiographs for Ductile Iron Castings |
|
ASTM E 690 |
Standard Practice for In Situ Electromagnetic (Eddy-Current) Examination of Nonmagnetic Heat Exchanger Tubes |
|
ASTM E 697 |
Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography |
|
ASTM E 7 |
Standard Terminology Relating to Metallography |
|
ASTM E 703 |
Standard Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals |
|
ASTM E 709 |
Standard Guide for Magnetic Particle Examination |
|
ASTM E 716 |
Standard Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis |
|
ASTM E 738 |
Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by Complexometric Titration |
|
ASTM E 739 |
Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (e-N) Fatigue Data |
|
ASTM E 74 |
Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines |
|
ASTM E 740 |
Standard Practice for Fracture Testing with Surface-Crack Tension Specimens |
|
ASTM E 746 |
Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film Systems |
|
ASTM E 747 |
Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology |
|
ASTM E 748 |
Standard Practices for Thermal Neutron Radiography of Materials |
|
ASTM E 749 |
Standard Practice for Acoustic Emission Monitoring During Continuous Welding |
|
ASTM E 75 |
Standard Test Methods for Chemical Analysis of Copper-Nickel and Copper- Nickel-Zinc Alloys |
|
ASTM E 750 |
Standard Practice for Characterizing Acoustic Emission Instrumentation |
|
ASTM E 751 |
Standard Practice for Acoustic Emission Monitoring During Resistance Spot- Welding |
|
ASTM E 766 |
Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope |
|
ASTM E 768 |
Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel |
|
ASTM E 796 |
Standard Test Method for Ductility Testing of Metallic Foil |
|
ASTM E 797 |
Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method |
|
ASTM E 8 |
Standard Test Methods for Tension Testing of Metallic Materials-AASHTO No.: T68 |
|
ASTM E 801 |
Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices |
|
ASTM E 802 |
Standard Reference Radiographs for Gray Iron Castings up to 4 1/2 in. (114 mm) in Thickness |
|
ASTM E 803 |
Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams |
|
ASTM E 81 |
Standard Test Method for Preparing Quantitative Pole Figures |
|
ASTM E 815 |
Standard Test Method for Determination of Calcium Fluoride in Fluorspar by Complexometric Titration |
|
ASTM E 82 |
Standard Test Method for Determining the Orientation of a Metal Crystal |
|
ASTM E 827 |
Standard Practice for Indentifying Elements by the Peaks in Auger Electron Spectroscopy |
|
ASTM E 83 |
Standard Practice for Verification and Classification of Extensometer System |
|
ASTM E 837 |
Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method |
|
ASTM E 840 |
Standard Practice for Using Flame Photometric Detectors in Gas Chromatography |
|
ASTM E 841 |
Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Atomic Absorption Spectrometry |
|
ASTM E 855 |
Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading |
|
ASTM E 877 |
Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials |
|
ASTM E 878 |
Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry |
|
ASTM E 88 |
Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition |
|
ASTM E 882 |
Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory |
|
ASTM E 883 |
Standard Guide for Reflected-Light Photomicrography |
|
ASTM E 8M |
Standard Test Methods for Tension Testing of Metallic Materials (METRIC) |
|
ASTM E 9 REV A |
Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature |
|
ASTM E 902 |
Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers |
|
ASTM E 908 |
Standard Practice for Calibrating Gaseous Reference Leaks |
|
ASTM E 915 |
Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement |
|
ASTM E 92 |
Standard Test Method for Vickers Hardness of Metallic Materials |
|
ASTM E 930 |
Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size) |
|
ASTM E 945 REV A |
Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by Complexometric Titrimetry |
|
ASTM E 963 |
Standard Practice for Electrolytic Extraction of Phases From Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte |
|
ASTM E 975 |
Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation |
|
ASTM E 976 |
Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response |
|
ASTM E 977 |
Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials |
|
ASTM E 983 |
Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy |
|
ASTM E 984 |
Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy |
|
ASTM E 986 |
Standard Practice for Scanning Electron Microscope Beam Size Characterization |
|
ASTM E 995 |
Standard Guide for Background Subtraction Techniques in Auger Electron and X-Ray Photoelectron Spectroscopy |
|
ASTM E 996 |
Standard Practice for Reporting Data in Auger Electron Spectroscopy and X- Ray Photoelectron Spectroscopy |
|
ASTM E 999 |
Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing |
|
ASTM F 1003 |
Standard Specification for Searchlights on Motor Lifeboats |
|
ASTM F 1005 |
Standard Practice for HVAC Duct Shapes; Identification and Description of Design Configuration |
|
ASTM F 1006 |
Standard Specification for Entrainment Separators for Use in Marine Piping Applications |
|
ASTM F 1007 |
Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application |
|
ASTM F 1014 |
Standard Specification for Flashlights on Vessels |
|
ASTM F 1018 REV A |
Standard Specification for Steel Emergency Gear Stowage Locker |
|
ASTM F 1019M |
Standard Specification for Steel Deck Gear Stowage Box (Metric) |
|
ASTM F 1030 |
Standard Practice for Selection of Valve Operators |
|
ASTM F 1043 |
Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework |
|
ASTM F 1058 |
Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel- 7Molybdenum Alloy Wire and Strip for Surgical Implant Applications (UNS R30003 and UNS R30008) |
|
ASTM F 1068 |
Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use |
|
ASTM F 1069 |
Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use |
|
ASTM F 1070 |
Standard Specification for Doors, Non-Tight, for Marine Use |
|
ASTM F 1071 |
Standard Specification for Expanded-Metal Bulkhead Panels |
|
ASTM F 1072 |
Standard Specification for Expanded-Metal Doors |
|
ASTM F 1073 |
Standard Specification for Door Fittings, for Watertight/Gastight/Airtight, Weathertight, and Non-Tight Doors, for Marine Use |
|
ASTM F 1074 |
Standard Specification for Cleats, Welded Horn Type |
|
ASTM F 1075 |
Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self- Contained |
|
ASTM F 1076 |
Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube |
|
ASTM F 1077 |
Standard Guide for Selection of Committee F16 Fastener Specifications |
|
ASTM F 1083 |
Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
|
ASTM F 1085 REV A |
Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels |