ASTM D 5681 REV A

Standard Terminology for Waste and Waste Management

ASTM D 5745

Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation

ASTM D 6044

Standard Guide for Representative Sampling for Management of Waste and Contaminated Media

ASTM D 6317

Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

ASTM E 2205

Standard Guide for Risk-Based Corrective Action for Protection of Ecological Resources

ASTM F 715

Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage

ASTM D 1739

Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)

ASTM D 4725

Standard Terminology for Engine Coolants

ASTM D 4861

Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air

ASTM D 5257

Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography

ASTM E 711

Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter

ASTM F 1737

Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems

ASTM D 3443

Standard Test Method for Chloride in Trichlorotrifluoroethane

ASTM D 3919

Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry

ASTM D 4282

Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion

ASTM D 4489

Standard Practices for Sampling of Waterborne Oils

ASTM D 5752

Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines

ASTM D 5765

Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating

ASTM E 1733

Standard Guide for Use of Lighting in Laboratory Testing

ASTM F 2564

Standard Specification for Design and Performance of a Light Sport Glider

ASTM D 1914

Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres

ASTM D 3326

Standard Practice for Preparation of Samples for Identification of Waterborne Oils

ASTM D 3651

Standard Test Method for Barium in Brackish Water, Seawater, and Brines

ASTM D 5462

Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water

ASTM D 6670

Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products

ASTM D 7283

Standard Test Method for Alpha- And Beta- Activity in Water By Liquid Scintillation Counting

ASTM E 1821

Standard Test Mehtod for Determination of Carbohydrates in Biomass by Gas Chromatography

ASTM E 2313

Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (Spectrophotometric Method)

ASTM F 1522

Standard Guide for Use of the Steam Stripping Process in Mitigating Chemical Spills

ASTM D 3561

Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry

ASTM D 5196

Standard Guide for Bio-Applications Grade Water

ASTM D 6502

Standard Test Method for On-Line Measurement of Low Level Particulate and Dissolved Metals in Water by X-Ray Flourescence (XRF)

ASTM D 6520

Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and Its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds

ASTM D 7316

Standard Guide for Interpretation of Existing Field Instrumentation to Influence Emergency Response Decisions

ASTM D 887

Standard Practices for Sampling Water-Formed Deposits

ASTM E 1755

Standard Test Method for Ash in Biomass

ASTM E 1757

Standard Practice for Preparation of Biomass for Compositional Analysis

ASTM E 1787

Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography

ASTM D 3084

Standard Practice for Alpha-Particle Spectrometry of Water

ASTM D 3741

Standard Test Methods for Appearance of Admixtures Containing Halogenated Organic Solvents

ASTM D 3862

Standard Test Method for Retention Characteristics of 0.2-Micrometer Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality

ASTM D 3869

Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines

ASTM D 3875

Standard Test Method for Alkalinity in Brackish Water, Seawater, and Brines

ASTM D 3972

Standard Test Method for Isotopic Uranium in Water by Radiochemistry

ASTM D 5544

Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water

ASTM D 6420

Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry

ASTM D 7326

Standard Practice for Handling, Transportation, and Storage of HFC Blend B (CH2FCF3, CHF2 CF3, and CO2)

ASTM E 1609

Standard Guide for Development and Implementation of a Pollution Prevention Program

ASTM E 1705

Standard Terminology Relating to Biotechnology

ASTM E 1863

Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography

ASTM E 2277

Standard Guide for Design and Construction of Coal Ash Structural Fills

ASTM F 2067

Standard Practice for Development and Use of Oil-Spill Trajectory Models

ASTM D 1941

Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume

ASTM D 5058

Standard Test Methods for Compatibility of Screening Analysis of Waste

ASTM D 5468

Standard Test Method for Gross Calorific and Ash Value of Waste Materials

ASTM D 5829

Standard Guide for Preparing a Training Program for Environmental Analytical Laboratories

ASTM D 6216

Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications

ASTM D 6503

Standard Test Method for Enterococci in Water Using Enterolert

ASTM D 6800

Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals

ASTM D 7282

Standard Practice for Set-up, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements

ASTM E 2238

Standard Guide for Evacuation Route Diagrams

ASTM D 4962

Standard Practice for NaI(TI) Gamma-Ray Spectrometry of Water

ASTM D 6209

Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)

ASTM D 6504

Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water

ASTM E 1758

Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography

ASTM D 4323

Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance

ASTM D 4793

Standard Test Method for Sequential Batch Extraction of Waste with Water

ASTM D 5541

Standard Practice for Developing a Stage-Discharge Relation for Open Channel Flow

ASTM D 6697

Standard Test Method for Determination for Chemical Oxygen Demand (Manganese III Oxygen Demand) of Water

ASTM E 1721

Standard Test Method for Determination of Acid-Insoluble Residue in Biomass

ASTM F 2483

Standard Practice for Maintenance and the Development of Maintenance Manuals for Light Sport Aircraft

ASTM F 2563

Standard Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation

ASTM D 2108

Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale)

ASTM D 3976

Standard Practice for Preparation of Sediment Samples for Chemical Analysis

ASTM D 4096

Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)

ASTM D 5072

Standard Test Method for Radon in Drinking Water

ASTM D 5790

Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry

ASTM D 6065

Standard Practice for Handling, Transportation, and Storage of HFC-227ea 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)

ASTM D 6231

Standard Specification for HFC-125 (Pentafluoroethane, C2HF5)

ASTM D 6698

Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water

ASTM D 6830

Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media

ASTM D 932

Standard Test Method for Iron Bacteria in Water and Water-Formed Deposits

ASTM E 410

Standard Test Method for Moisture and Residue in Liquid Chlorine

ASTM F 2152

Standard Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom

ASTM F 2205

Standard Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response: Tropical Environments

ASTM F 2352

Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft

ASTM D 4515

Standard Practice for Estimation of Holding Time for Water Samples Containing Organic Constituents

ASTM D 5530

Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry

ASTM D 5960

Standard Specification for Technical Grade Ethylene Dichloride

ASTM D 6348

Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy

ASTM D 6806

Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography

ASTM D 6842

Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making

ASTM D 7315

Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode

ASTM E 778

Standard Test Methods for Nitrogen in the Analysis Sample of Refuse-Derived Fuel

ASTM E 871

Standard Method for Moisture Analysis of Particulate Wood Fuels

ASTM F 2507

Standard Specification for Recreational Airpark Design

ASTM F 2533

Standard Guide for In-Situ Burning of Oil in Ships or Other Vessels

ASTM D 3866

Standard Test Methods for Silver in Water

ASTM D 4190

Standard Test Method for Elements in Water by Direct-Current Plasma Atomic Emission Spectroscopy

ASTM D 4490

Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes

ASTM D 5241

Standard Practice for Micro-Extraction of Water for Analysis of Volatile and Semi- Volatile Organic Compounds in Water

ASTM D 6301

Standard Practice for the Collection of Samples of Filterable and Nonfilterable Matter in Water

ASTM D 7201

Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)

ASTM D 7203

Standard Test Method for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor

ASTM E 1294

Standard Test Method for Pore Size Characteristics of Membrane Filters Using Automated Liquid Porosimeter

ASTM E 1689

Standard Guide for Developing Conceptual Site Models for Contaminated Sites

ASTM E 2180

Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agent(s) In Polymeric or Hydrophobic Materials

ASTM F 1738

Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants

ASTM F 1834

Standard Guide for Consideration of Anaerobic Bioremediation as a Chemical Pollutant Mitigation Method on Land

ASTM D 3372

Standard Test Method for Molybdenum in Water

ASTM D 4165

Standard Test Method for Cyanogen Chloride in Water

ASTM D 4454

Standard Test Method for Simultaneous Enumeration of Total and Respiring Bacteria in Aquatic Systems by Microscopy

ASTM D 5013

Standard Practices for Sampling Wastes from Pipes and Other Point Discharges

ASTM D 6640

Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations

ASTM E 2037

Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)

ASTM F 1093

Standard Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom

ASTM F 1600 REV A

Standard Terminology Relating to Bioremediation

ASTM F 2059

Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using the Swirling Flask

ASTM D 1901

Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures

ASTM D 4185

Standard Practice for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry

ASTM D 4192

Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry

ASTM D 4516

Standard Practice for Standardizing Reverse Osmosis Performance Data

ASTM D 5659

Standard Test Method for Chlorophenoxy Acid Herbicides in Waste Using HPLC

ASTM D 5812

Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography

ASTM D 6161

Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration and Reverse Osmosis Membrane Processes

ASTM D 6250

Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions

ASTM D 6689

Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization

ASTM E 1286

Standard Guide for Identification of Herpes Simplex Virus or Its DNA

ASTM E 2036

Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)

ASTM E 2318

Standard Guide for Environmental Health Site Assessment Process for Military Deployments

ASTM F 2532

Standard Guide for Determining Net Environmental Benefit of Dispersant Use

ASTM F 838

Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration-Reinstated

ASTM D 3087

Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal

ASTM D 4012

Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water

ASTM D 4755

Standard Test Method for Free Halogens in Halogenated Organic Solvents and Their Admixtures

ASTM D 5015

Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination

ASTM D 5242

Standard Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs

ASTM D 5828

Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates

ASTM D 5955

Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM

ASTM D 6831 REV A

Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

ASTM E 1259

Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390 Degree C

ASTM E 1497

Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids

ASTM E 224

Standard Test Methods for Analysis of Hydrochloric Acid

ASTM F 2506

Standard Specification for Design and Testing of Fixed-Pitch or Ground Adjustable Light Sport Aircraft Propellers

ASTM D 2331

Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits

ASTM D 3731

Standard Practices for Measurement of Chlorophyll Content of Algae in Surface Waters

ASTM D 3923

Standard Practices for Detecting Leaks in Reverse Osmosis Devices

ASTM D 5175

Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography

ASTM D 5317

Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector

ASTM D 5916

Standard Test Method for Detection and Enumeration of Clostridium Perfringens from Water and Extracted Sediments by Membrane Filtration (MF)

ASTM D 5996

Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography

ASTM D 6323

Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities

ASTM E 1117

Standard Practice for Design of Fuel-Alcohol Manufacturing Facilities

ASTM E 1427

Standard Guide for Selecting Test Methods to Determine the Effectiveness of Antimicrobial Agents and Other Chemicals for the Prevention, Inactivation and Removal of Biofilm

ASTM E 2148

Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety

ASTM E 2469

Standard Test Method for Chloride in Monoethylene Glycol by Ion Chromatography

ASTM E 869

Standard Test Method for Performance Evaluation of Fuel Ethanol Manufacturing Facilities

ASTM F 1481

Standard Guide for Ecological Considerations for the Use of Bioremediation in Oil Spill Response - Sand and Gravel Beaches

ASTM F 1524

Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills

ASTM F 726

Standard Test Method for Sorbent Performance of Adsorbents

ASTM D 2667

Standard Test Method for Biodegradability of Alkylbenzene Sulfonates

ASTM D 3269

Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Manual Procedures)

ASTM D 4309

Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water

ASTM D 5245

Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses

ASTM D 6050

Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste

ASTM D 6471

Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service

ASTM D 6501

Standard Test Method for Phosphonate in Brines

ASTM D 6807

Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from 2 to 100 S/cm1

ASTM E 1178

Standard Test Methods for Analysis of Acrylonitrile

ASTM E 1370

Standard Guide for Air Sampling Strategies for Worker and Workplace Protection

ASTM E 1584

Standard Test Method for Assay of Nitric Acid

ASTM E 1625

Standard Test Method for Determining Biodegradability of Organic Chemicals in Semi-Continuous Activated Sludge (SCAS)

ASTM E 2308

Standard Guide for Limited Asbestos Screens of Buildings

ASTM E 611

Standard Test Methods for Low Concentrations of Diethylene Glycol in Ethylene Glycol by Gas Chromatography

ASTM F 2436

Standard Test Method for Measuring the Performance of Synthetic Rope Rescue Belay Systems Using a Drop Test

ASTM D 4079

Standard Specification for Vapor-Degreasing Grade Methylene Chloride

ASTM D 4382

Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace

ASTM D 4520

Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods

ASTM D 5231

Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste

ASTM D 5316

Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography

ASTM D 5411

Standard Practice for Calculation of Average Energy per Disintegration (E) for a Mixture of Radionuclides in Reactor Coolant

ASTM D 6994

Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection

ASTM E 2275

Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance-Supersedes ASTM D 3946 and ASTM E 686

ASTM E 2418

Standard Guide for Readily Observable Mold and Conditions Conducive to Mold in Commercial Buildings: Baseline Survey Process

ASTM F 1209

Standard Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs

ASTM F 2084

Standard Guide for Collecting Containment Boom Performance Data in Controlled Environments

ASTM F 2240

Standard Specification for Manufacturer Quality Assurance Program for Powered Parachute Aircraft

ASTM D 1607

Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess- Saltzman Reaction)

ASTM D 2332

Standard Practice for Analysis of Water-Formed Deposits by Wavelength- Dispersive X-Ray Fluorescence

ASTM D 3162

Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)

ASTM D 5281

Standard Test Method for Collection and Analysis of Hexavalent Chromium in Ambient Atmospheres

ASTM D 5320

Standard Test Methods for Determination of 1,1,1- Trichloroethane and Methylene Chloride Content in Stabilized Trichloroethylene and Tetrachloroethylene

ASTM D 5640

Standard Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water

ASTM D 6107

Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service

ASTM D 6129

Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy

ASTM D 934

Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits by X-Ray Diffraction

ASTM E 1391

Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates-Supersedes ASTM D 4346

ASTM E 1882

Standard Test Method for Evaluation of Antimicrobial Formulations by the Agar Patch Technique

ASTM E 1972

Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment

ASTM E 2197

Standard Quantitative Disk Carrier Test Method for Determining the Bactericidal, Virucidal, Fungicidal, Mycobactericidal and Sporicidal Activities of Liquid Chemical Germicides

ASTM E 256

Standard Test Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition

ASTM F 2317/F 2317M

Standard Specification for Design of Weight-Shift-Control Aircraft1

ASTM F 2415

Standard Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft

ASTM D 3147

Standard Test Method for Testing Stop-Leak Additives for Engine Coolants

ASTM D 3844

Standard Guide for Labeling Halogenated Hydrocarbon Solvent Containers

ASTM D 4517

Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy

ASTM D 5614

Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs

ASTM D 5759

Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses

ASTM D 5956

Standard Guide for Sampling Strategies for Heterogeneous Wastes

ASTM D 6009

Standard Guide for Sampling Wastes Piles

ASTM D 6062

Standard Guide for Personal Samplers of Health-Related Aerosol Fractions

ASTM D 6329

Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers

ASTM D 7144 REV A

Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination

ASTM E 1054

Standard Test Methods for Evaluation of Inactivators of Antimicrobial Agents

ASTM E 1847

Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines

ASTM E 1990

Standard Guide for Performing Evaluations of Underground Storage Tank Systems for Operational Conformance with 40 CFR, Part 280 Regulations

ASTM E 2348

Standard Guide for Framework for a Consensus-based Environmental Decisionmaking Process

ASTM E 2407

Standard Test Method for Effectiveness of Defoaming Agents

ASTM E 872

Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels

ASTM F 1657

Standard Practice for Emergency Joining of Booms with Incompatible Connectors

ASTM F 1872

Standard Guide for Use of Chemical Shoreline Cleaning Agents: Environmental and Operational Condiderations

ASTM F 2355 REV A

Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft

ASTM D 3558

Standard Test Methods for Cobalt in Water

ASTM D 3868

Standard Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines

ASTM D 4193

Standard Test Method for Thiocyanate in Water

ASTM D 4298

Standard Guide for Intercomparing Permeation Tubes to Establish Traceability

ASTM D 5042

Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins

ASTM D 5284

Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid

ASTM D 5495

Standard Practice for Sampling with a Composite Liquid Waste Sampler (COLIWASA)

ASTM D 5633

Standard Practice for Sampling with a Scoop

ASTM D 5788

Standard Guide for Spiking Organics into Aqueous Samples

ASTM D 6233

Standard Guide for Data Assessment for Environmental Waste Management Activities

ASTM D 6330

Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers under Defined Test Conditions

ASTM D 6363

Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method

ASTM D 6620

Standard Practice for Asbestos Detection Limit Based on Counts

ASTM D 7204

Standard Practice for Sampling Waste Streams on Conveyors

ASTM D 7327

Standard Specification for HFC Blend B (CH2FCF3, CHF2CF3, and CO2)

ASTM E 1120

Standard Specification for Liquid Chlorine

ASTM E 1147

Standard Test Method for Partition Coefficient (N-Octanol/Water) Estimation by Liquid Chromatography

ASTM E 1534

Standard Test Method for Determination of ASH Content of Particulate Wood Fuels

ASTM E 1542

Standard Terminology Relating to Occupational Health and Safety

ASTM E 2564

Standard Test Method for Enumeration of Mycobacteria in Metalworking Fluids by Direct Microscopic Counting (DMC) Method

ASTM F 1656

Standard Guide for Health and Safety Training of Oil Spill Responders in the United States

ASTM D 3796

Standard Practice for Calibration of Type S Pitot Tubes

ASTM D 5012

Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition

ASTM D 5057

Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste

ASTM D 5233

Standard Test Method for Single Batch Extraction Method for Wastes

ASTM D 5258

Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating

ASTM D 6176

Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors

ASTM D 6346

Standard Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs

ASTM D 6661

Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling

ASTM E 1498

Standard Guide for Conducting Sexual Reproduction Tests with Seaweeds

ASTM E 1615

Standard Test Methods for Iron in Trace Quantities Using the FerroZine Method

ASTM E 1688 REV A

Standard Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic Invertebrates

ASTM E 1746

Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities-Replaces E412-93; E1-2001

ASTM E 1984

Standard Guide for Brownfields Redevelopment

ASTM E 2122

Standard Guide for Conducting In-Situ Field Bioassays with Caged Bivalves

ASTM E 777

Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse- Derived Fuel

ASTM E 850

Standard Practice for Use of Inorganic Process Wastes as Structural Fill

ASTM F 1788

Standard Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations

ASTM F 1847

Standard Guide for Demonstrating Minimum Skills of Search and Rescue Dogs and Handlers

ASTM F 2008

Standard Guide for Qualitative Observation of Skimmer Performance

ASTM D 1245

Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy

ASTM D 3454

Standard Test Method for Radium-226 in Water

ASTM D 3697

Standard Test Method for Antimony in Water

ASTM D 3863

Standard Test Method for Retention Characteristics of 0.40 to 0.45- m Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality

ASTM D 4823

Standard Guide for Core Sampling Submerged, Unconsolidated Sediments

ASTM D 4982

Standard Test Methods for Flammability Potential Screening Analysis of Waste

ASTM D 5085

Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography

ASTM D 5157

Standard Guide for Statistical Evaluation of Indoor Air Quality Models

ASTM D 5475

Standard Test Method for Nitrogen- and Phosphorus-Containing Pesticides in Water by Gas Chromatography with a Nitrogen-Phosphorus Detector

ASTM D 6268

Standard Practice for Handling, Transportation, and Storage of HFC-125, Pentafluoroethane (C2HF5)

ASTM D 6480

Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy

ASTM D 6498

Standard Guide for Household Hazardous Waste Training Outline for Household Hazardous Waste Collection Operations

ASTM D 6552

Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols

ASTM D 6669 REV A

Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints

ASTM D 6734

Standard Test Method for Low Levels of Coliphages in Water

ASTM D 6808

Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis

ASTM D 6908

Standard Practice for Integrity Testing of Water Filtration Membrane Systems

ASTM D 7065

Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert- Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry

ASTM D 7237

Standard Test Method for Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection

ASTM E 1839

Standard Test Method for Efficacy of Slimicides for the Paper Industry—Bacterial and Fungal Slime

ASTM E 2314

Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)

ASTM E 723

Standard Test Method for Efficacy of Antimicrobials as Preservatives for Aqueous-Based Products Used in the Paper Industry (Bacterial Spoilage)

ASTM F 1210

Standard Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies

ASTM F 1490 REV A

Standard Terminology Relating to Search and Rescue

ASTM F 2099

Standard Guide for Use of Universal Transverse Mercator (UTM) Grids When Preparing and Using a Field Map for Land Search

ASTM F 2465

Standard Guide for Oil Spill Dispersant Application Equipment: Single-point Spray Systems

ASTM F 2560

Standard Specification for Supralaryngeal Airways and Connectors

ASTM D 2251

Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures

ASTM D 3865

Standard Test Method for Plutonium in Water

ASTM D 4472

Standard Guide for Recordkeeping for Reverse Osmosis Systems

ASTM D 4778

Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions

ASTM D 4978

Standard Test Methods for Screening of Reactive Sulfides in Waste

ASTM D 4994

Standard Practice for Recovery of Viruses from Wastewater Sludges

ASTM D 5315

Standard Test Method for Determination of N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization

ASTM D 5744

Standard Test Method for Accelerated Weathering of Solid Materials Using a Modified Humidity Cell

ASTM D 5831

Standard Test Method for Screening Fuels in Soils

ASTM D 6331

Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)

ASTM D 6494

Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction