|
ASTM D 610 |
Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces-SSPC-VIS-2 |
|
ASTM D 6131 |
Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments |
|
ASTM D 6132 |
Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage |
|
ASTM D 6133 |
Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph |
|
ASTM D 6137 |
Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
|
ASTM D 6142 |
Standard Test Method for Analysis of Phenol by Capillary Gas Chromatograpy-Supersedes ASTM D 4961 |
|
ASTM D 6143 |
Standard Test Method for Iron Content of Bisphenol A (4,4´ - Isopropylidenediphenol) |
|
ASTM D 6144 |
Standard Test Method for Analysis of AMS (alpha-Methylstyrene) by Capillary Gas Chromatography |
|
ASTM D 6165 |
Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials |
|
ASTM D 6166 |
Standard Test Method for Color of Naval Stores and Related Products (Instrumental Determination of Gardner Color) |
|
ASTM D 6188 |
Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall |
|
ASTM D 6189 |
Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings |
|
ASTM D 6191 |
Standard Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings |
|
ASTM D 6206 |
Standard Practice for Sampling of Coating Films |
|
ASTM D 6212 |
Standard Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Rateometric Colorimetry |
|
ASTM D 6229 |
Standard Test Method for Trace Benezene in Hydrocarbon Solvents by Capillary Gas Chromatography |
|
ASTM D 6237 |
Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
|
ASTM D 6266 REV A |
Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released from Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
|
ASTM D 6267 |
Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures |
|
ASTM D 6279 |
Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings |
|
ASTM D 6280 |
Specification for Zinc Phosphate Pigments |
|
ASTM D 6313 |
Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Sulfur Specific Difference Photometry |
|
ASTM D 6336 |
Practice for Evaluation of Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer |
|
ASTM D 6337 |
Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics |
|
ASTM D 6367 |
Standard Specification for AMS (a-Methylstyrene) |
|
ASTM D 6386 |
Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
|
ASTM D 6387 |
Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography |
|
ASTM D 6419 |
Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks |
|
ASTM D 6428 |
Test Method for Total Sulfur in Liquid Aromatic Hydrocarbons and Their Derivatives by Oxidative Combustion and Electrochemical Detection |
|
ASTM D 6438 |
Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography |
|
ASTM D 6440 |
Standard Terminology Relating to Hydrocarbon Resins |
|
ASTM D 6441 |
Standard Test Methods for Measuring the Hiding Power of Powder Coatings |
|
ASTM D 6442 |
Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water |
|
ASTM D 6486 |
Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings |
|
ASTM D 6487 |
Standard Practice for Preparing Prints of Paste Printing Inks by Rollouts on a Laboratory Flat-Bed Press |
|
ASTM D 6488 |
Standard Terminology Relating to Print Problems |
|
ASTM D 6489 |
Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated with a Water Repellent Coating |
|
ASTM D 6490 |
Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels |
|
ASTM D 6491 |
Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test |
|
ASTM D 6492 |
Standard Practice for Detection of Hexavalent Chromium on Zinc and Zinc/Aluminum Alloy Coated Steel |
|
ASTM D 6493 |
Standard Test Methods for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus |
|
ASTM D 6526 |
Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography |
|
ASTM D 6531 |
Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement |
|
ASTM D 6532 |
Standard Test Method for Evaluation of Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens |
|
ASTM D 6563 |
Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography |
|
ASTM D 6577 REV A |
Standard Guide for Testing Industrial Protective Coatings |
|
ASTM D 6578 |
Standard Practice for Determination of Graffiti Resistance |
|
ASTM D 6579 |
Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography |
|
ASTM D 6580 |
Standard Test Method for the Determination of Metallic Zinc in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings |
|
ASTM D 6583 |
Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption |
|
ASTM D 660 |
Standard Test Method for Evaluating Degree of Checking of Exterior Paints |
|
ASTM D 6604 |
Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry |
|
ASTM D 6605 |
Standard Practice for Determining the Color Stability of Hydrocarbon Resins After Heating |
|
ASTM D 6606 |
Standard Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer |
|
ASTM D 661 |
Standard Test Method for Evaluating Degree of Cracking of Exterior Paints |
|
ASTM D 6619 |
Standard Practice for Incorporating Pigments by High Speed Dispersion |
|
ASTM D 662 |
Standard Test Method for Evaluating Degree of Erosion of Exterior Paints |
|
ASTM D 6621 |
Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials |
|
ASTM D 6631 |
Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method |
|
ASTM D 6632 |
Standard Test Method for Total Copper in Antilfouling Paints |
|
ASTM D 6665 |
Standard Practice for Evaluation of Aging Resistance of Pre-Stressed Prepainted Metal in a Boiling Water Test |
|
ASTM D 6675 |
Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
|
ASTM D 6676 |
Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating |
|
ASTM D 6677 |
Standard Test Method for Evaluating Adhesion by Knife |
|
ASTM D 6686 |
Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings |
|
ASTM D 6687 |
Standard Guide for Testing Printing Ink Vehicles and Components Thereof |
|
ASTM D 6688 |
Standard Test Method for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Method |
|
ASTM D 6695 REV B |
Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
|
ASTM D 6736 |
Standard Test Method for Burnish Resistance of Latex Paints |
|
ASTM D 6737 |
Standard Test Method for Bulk Density of Tapered Paintbrush Filaments |
|
ASTM D 6762 REV A |
Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings |
|
ASTM D 6763 |
Standard Guide for Testing Exterior Wood Stains |
|
ASTM D 6801 REV A |
Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art Materials |
|
ASTM D 6809 |
Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
|
ASTM D 6821 |
Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer |
|
ASTM D 6846 |
Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage |
|
ASTM D 6875 |
Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor |
|
ASTM D 6886 |
Standard Test Method for Speciation of the Volatile Organic Compounds (VOCs) in Low VOC Content Waterborne Air-Dry Coatings by Gas Chromatograpy |
|
ASTM D 6887 |
Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions |
|
ASTM D 6899 |
Standard Guide for Laboratory Cyclic Corrosion Testing of Automotive Painted Steel |
|
ASTM D 6900 |
Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate |
|
ASTM D 6901 |
Standard Specification for Artists Colored Pencils |
|
ASTM D 6902 |
Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings |
|
ASTM D 6904 |
Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry |
|
ASTM D 6905 |
Standard Test Method for Impact Flexibility of Organic Coatings |
|
ASTM D 6906 |
Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence |
|
ASTM D 6942 |
Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments |
|
ASTM D 6943 |
Standard Practice for Immersion Testing of Industrial Protective Coatings |
|
ASTM D 6944 |
Standard Test Method for Resistance of Cured Coatings to Thermal Cycling |
|
ASTM D 6957 |
Standard Practice for Measuring Curl in Paint Brush Filling Material |
|
ASTM D 6989 |
Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions |
|
ASTM D 6990 |
Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems |
|
ASTM D 6991 |
Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method |
|
ASTM D 7011 |
Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
|
ASTM D 7054 |
Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America |
|
ASTM D 7055 |
Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings |
|
ASTM D 7057 |
Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard) |
|
ASTM D 7072 |
Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings |
|
ASTM D 7073 |
Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films |
|
ASTM D 7087 REV A |
Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments |
|
ASTM D 7088 |
Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry |
|
ASTM D 7090 |
Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography |
|
ASTM D 7091 |
Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non- Ferrous Metals |
|
ASTM D 7093 |
Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome |
|
ASTM D 7108 |
Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist |
|
ASTM D 711 |
Standard Test Method for No-Pick-Up Time of Traffic Paint |
|
ASTM D 7124 |
Standard Specification for Benzene for use with Zeolite Based Catalysts |
|
ASTM D 7125 |
Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process |
|
ASTM D 7127 |
Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument |
|
ASTM D 713 |
Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials |
|
ASTM D 714 |
Standard Test Method for Evaluating Degree of Blistering of Paints |
|
ASTM D 715 |
Standard Test Methods for Analysis of Barium Sulfate Pigment |
|
ASTM D 716 |
Standard Test Methods for Evaluating Mica Pigment |
|
ASTM D 7163 |
Standard Test Method for Specular Gloss of Printed Matter |
|
ASTM D 7167 |
Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant |
|
ASTM D 717 |
Standard Test Methods for Analysis of Magnesium Silicate Pigment |
|
ASTM D 718 |
Standard Test Methods for Analysis of Aluminum Silicate Pigment |
|
ASTM D 7187 |
Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching |
|
ASTM D 7188 |
Standard Terminology for Printing Inks, Materials, and Processes |
|
ASTM D 7189 |
Standard Test Method for Relative Mileage of News Ink on Newsprint |
|
ASTM D 7190 |
Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films |
|
ASTM D 740 |
Standard Specification for Methyl Ethyl Ketone |
|
ASTM D 763 |
Standard Specification for Raw and Burnt Umber Pigments |
|
ASTM D 765 |
Standard Specification for Raw and Burnt Sienna Pigments |
|
ASTM D 768 |
Standard Specification for Yellow Iron Oxide Hydrated |
|
ASTM D 769 |
Standard Specification for Black Synthetic Iron Oxide |
|
ASTM D 770 |
Standard Specification for Isopropyl Alcohol |
|
ASTM D 772 |
Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints |
|
ASTM D 79 |
Standard Specification for Zinc Oxide Pigments-AASHTO No.: M124 |
|
ASTM D 801 |
Standard Test Methods for Sampling and Testing Dipentene |
|
ASTM D 802 |
Standard Test Methods for Sampling and Testing Pine Oils |
|
ASTM D 803 |
Standard Test Methods for Testing Tall Oil |
|
ASTM D 804 |
Terminology Relating to Naval Stores, Including Tall Oil and Related Products |
|
ASTM D 81 |
Standard Specification for Basic Carbonate White Lead Pigment |
|
ASTM D 817 |
Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate |
|
ASTM D 822 |
Standard Practice for Filtered Open-Flame Carbon-Arc Exposure Apparatus of Paint and Related Coatings |
|
ASTM D 823 |
Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels |
|
ASTM D 83 |
Standard Specification for Red Lead Pigment |
|
ASTM D 841 |
Standard Specification for Nitration Grade Toluene |
|
ASTM D 843 |
Standard Specification for Nitration Grade Xylene |
|
ASTM D 847 |
Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons |
|
ASTM D 848 |
Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons |
|
ASTM D 849 |
Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons |
|
ASTM D 85 |
Standard Specification for Ochre Pigment |
|
ASTM D 850 |
Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials |
|
ASTM D 852 |
Standard Test Method for Solidification Point of Benzene |
|
ASTM D 853 |
Standard Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic Hydrocarbons |
|
ASTM D 868 |
Standard Test Method for Evaluating Degree of Bleeding of Traffic Paint |
|
ASTM D 869 |
Standard Test Method for Evaluating Degree of Settling of Paint |
|
ASTM D 870 |
Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
|
ASTM D 871 |
Standard Test Methods of Testing Cellulose Acetate |
|
ASTM D 889 |
Standard Test Method for Volatile Oil in Rosin |
|
ASTM D 890 |
Standard Test Method for Water in Liquid Naval Stores |
|
ASTM D 913 |
Standard Test Method for Evaluating Degree of Resistance to Wear of Traffic Paint-Discontinued 2002 - Reinstated |
|
ASTM D 914 |
Standard Test Methods for Ethylcellulose |
|
ASTM D 960 REV A |
Standard Specification for Raw Castor Oil |
|
ASTM D 961 |
Standard Specification for Dehydrated Castor Oil |
|
ASTM D 962 |
Standard Specification for Aluminum Powder and Paste Pigments for Paints |
|
ASTM D 964 |
Standard Specification for Metallic Copper Powder for Use in Antifouling Paints |
|
ASTM D 968 |
Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive |
|
ASTM D 969 |
Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint |
|
ASTM E 1341 |
Standard Practice for Obtaining Spectroradiometric Data from Radiant Sources for Colorimetry |
|
ASTM E 1348 |
Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
|
ASTM E 1349 |
Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry |
|
ASTM E 1708 |
Standard Practice for Electronic Interchange of Color and Appearance Data |
|
ASTM E 2194 |
Standard Practice for Multiangle Color Measurement of Metal Flake Pigmented Materials |
|
ASTM E 28 |
Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus |
|
ASTM E 284 REV A |
Standard Terminology of Appearance |
|
ASTM E 308 |
Standard Practice for Computing the Colors of Objects by Using the CIE System |
|
ASTM E 811 |
Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors under Nighttime Conditions |
|
ASTM E 848 |
Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates |
|
ASTM E 991 |
Standard Practice for Color Measurement of Fluorescent Specimens |
|
ASTM G 10 |
Standard Test Method for Specific Bendability of Pipeline Coatings |
|
ASTM G 11 |
Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings |
|
ASTM G 12 |
Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel |
|
ASTM G 14 |
Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test) |
|
ASTM G 17 |
Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod) |
|
ASTM G 18 |
Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines |
|
ASTM G 19 |
Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial |
|
ASTM G 20 |
Standard Test Method for Chemical Resistance of Pipeline Coatings |
|
ASTM G 42 |
Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures |
|
ASTM G 55 |
Standard Test Method for Evaluating Pipeline Coating Patch Materials |
|
ASTM G 6 |
Standard Test Method for Abrasion Resistance of Pipeline Coatings |
|
ASTM G 62 |
Standard Test Methods for Holiday Detection in Pipeline Coatings |
|
ASTM G 70 |
Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test) |
|
ASTM G 8 |
Standard Test Methods for Cathodic Disbonding of Pipeline Coatings |
|
ASTM G 80 |
Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings |
|
ASTM G 9 |
Standard Test Method for Water Penetration into Pipeline Coatings |
|
ASTM G 95 |
Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method) |