ASTM D 5182

Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)

ASTM D 2549

Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography

ASTM D 2008

Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products

ASTM D 2501

Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils

ASTM D 7213

Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615°C by Gas Chromatography

ASTM D 6228

Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection

ASTM D 2013

Standard Practice for Preparing Coal Samples for Analysis

ASTM D 1250 ADJ V3

Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume III Table 6C - Volume Correction Factors for Individual and Special Applications Volume Correction to 60 Degrees F Against Thermal Expansion Coefficients at 60 Degrees F-Addendum - January 1995; API Standard: API MPMS Ch.11.1; IP Designation: 200/80 (90); API Standard: 2540; IP Designation: 200; ISO/DIS91/1.2

ASTM D 1405

Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

ASTM D 2427

Standard Test Method for Determination of C2 Through C5 Hydrocarbons in Gasolines by Gas Chromatography

ASTM D 3336

Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures

ASTM D 2425

Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry

ASTM D 7155

Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils

ASTM D 2782

Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)-IP Designation: 240/84

ASTM D 121

Standard Terminology of Coal and Coke

ASTM D 1321

Standard Test Method for Needle Penetration of Petroleum Waxes

ASTM D 4239

Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High- Temperature Tube Furnace Combustion Methods

ASTM D 5373

Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke

ASTM D 4468

Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry

ASTM D 6439

Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems

ASTM D 3173

Standard Test Method for Moisture in the Analysis Sample of Coal and Coke

ASTM D 6278

Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Appartus

ASTM D 6078

Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)

ASTM D 7214

Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation

ASTM D 6277

Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy

ASTM D 6892

Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)

ASTM D 909

Standard Test Method for Knock Characteristics of Aviation Gasolines by the Supercharge Method-IP Designation: 119/96

ASTM D 4539

Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)

ASTM D 2502

Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements

ASTM D 6184

Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)

ASTM D 4628

Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry

ASTM D 4636

Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils

ASTM D 7212

Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter

ASTM D 5003 REV A

Standard Test Method for the Hardgrove Grindability Index (HGI) of Petroleum Coke

ASTM D 6617

Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material

ASTM D 2070

Standard Test Method for Thermal Stability of Hydraulic Oils

ASTM D 5865

Standard Test Method for Gross Calorific Value of Coal and Coke

ASTM D 6481

Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-Ray Fluorescence Spectroscopy

ASTM D 2392

Standard Test Method for Color of Dyed Aviation Gasolines

ASTM D 3341

Standard Test Method for Lead in Gasoline - Iodine Monochloride Method

ASTM D 4171

Standard Specification for Fuel System Icing Inhibitors

ASTM D 4307

Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards

ASTM D 5482

Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method - Atmospheric)

ASTM D 5600

Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

ASTM D 3174

Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal

ASTM D 6258

Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels

ASTM D 3233

Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)

ASTM D 5986

Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8 C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy

ASTM D 6224

Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

ASTM D 5305

Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor

ASTM D 2269

Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption

ASTM D 3176

Standard Practice for Ultimate Analysis of Coal and Coke

ASTM D 2597

Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography

ASTM D 4174

Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems

ASTM D 6756

Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer

ASTM D 1092

Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases

ASTM D 2234/D 2234M

Standard Practice for Collection of a Gross Sample of Coal

ASTM D 4950

Standard Classification and Specification for Automotive Service Greases

ASTM D 1157

Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons

ASTM D 4741

Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer

ASTM D 7060

Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)

ASTM D 7156

Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine

ASTM D 1250 ADJ V6

Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume VI Table 24C - Volume Correction Factors for Individual and Special Applications Volume Correction to 60 Degrees F Against Thermal Expansion Coefficients at 60 Degrees F-API Standard API MPMS Ch.11.1; IP Designation: 200/80 (90); BSI Handbook; API Standard 2540; IP Designation: 200; ISO/DIS91/1.2

ASTM D 409

Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method

ASTM D 7171

Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy

ASTM D 3339

Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration

ASTM D 2766

Standard Test Method for Specific Heat of Liquids and Solids

ASTM D 346

Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis

ASTM D 5704

Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

ASTM D 6158

Standard Specification for Mineral Hydraulic Oils

ASTM C 611

Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature

ASTM D 4084

Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)

ASTM D 6159

Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography

ASTM D 6200

Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis

ASTM D 6350

Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy

ASTM D 5967

Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

ASTM D 6375

Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method

ASTM D 7157

Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)

ASTM D 5954

Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy

ASTM D 2670

Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)

ASTM D 4423

Standard Test Method for Determination of Carbonyls in C4 Hydrocarbons

ASTM D 5797

Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines

ASTM D 6593

Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

ASTM D 7094

Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester

ASTM D 5142

Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures

ASTM D 6594

Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C

ASTM D 937

Standard Test Method for Cone Penetration of Petrolatum-IP Designation: 179/79(95)

ASTM D 2593

Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography-IP Designation: 194/74(81)

ASTM D 7059

Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography

ASTM D 2603

Test Method for Sonic Shear Stability of Polymer-Containing Oils

ASTM D 2786

Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry

ASTM D 7235

Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices

ASTM D 1016

Standard Test Method for Purity of Hydrocarbons from Freezing Points

ASTM D 2650

Standard Test Method for Chemical Composition of Gases by Mass Spectrometry

ASTM D 2669

Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)

ASTM D 4424

Standard Test Method for Butylene Analysis by Gas Chromatography

ASTM D 5901

Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method)-IP Designation: 434/98

ASTM D 1480

Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer

ASTM D 2503

Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure

ASTM D 4049

Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray

ASTM D 4626

Standard Practice for Calculation of Gas Chromatographic Response Factors-IP Designation: 378/87

ASTM D 3177

Standard Test Methods for Total Sulfur in the Analysis Sample of Coal and Coke

ASTM C 651

Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature

ASTM D 4170

Standard Test Method for Fretting Wear Protection by Lubricating Greases

ASTM D 6335 REV B

Standard Test Method for Determination of High Temperature Deposits by Thermo- Oxidation Engine Oil Simulation Test

ASTM D 3524

Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography

ASTM D 6186

Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)

ASTM D 2780

Standard Test Method for Solubility of Fixed Gases in Liquids

ASTM D 5799

Standard Test Method for Determination of Peroxides in Butadiene

ASTM D 3702

Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine

ASTM D 1481

Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer

ASTM D 322

Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation

ASTM D 2982

Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils

ASTM D 6849

Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods

ASTM D 4241

Standard Practice for Design of Gas Turbine Generator Lubricating Oil Systems

ASTM D 5598

Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling

ASTM D 6595

Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

ASTM C 714

Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method

ASTM D 7152

Standard Practice for Calculating Viscosity of a Blend of Petroleum Products

ASTM D 7320

Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine

ASTM D 6417

Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography

ASTM D 2595

Standard Test Method for Evaporation Loss of Lubricating Greases over Wide-Temperature Range

ASTM D 7319

Standard Test Method for Determination of Total and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography

ASTM D 5662 REV A

Standard Test Method for Determining Automotive Gear Oil Compatability with Typical Oil Seal Elastomers

ASTM D 6793

Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus

ASTM D 71

Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)

ASTM D 2717

Standard Test Method for Thermal Conductivity of Liquids

ASTM D 3117

Standard Test Method for Wax Appearance Point of Distillate Fuels

ASTM D 2384

Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures

ASTM D 6227 REV A

Standard Specification for Grade 82 Unleaded Aviation Gasoline

ASTM D 1091

Standard Test Methods for Phosphorus in Lubricating Oils and Additives

ASTM D 4248

Standard Practice for Design of Steam Turbine Generator Oil Systems

ASTM D 7038

Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants

ASTM D 1662

Standard Test Method for Active Sulfur in Cutting Oils

ASTM D 6185

Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases

ASTM D 7261 REV A

Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer

ASTM D 4810

Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes

ASTM D 4860

Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating)

ASTM D 3525

Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography

ASTM D 4053

Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy

ASTM D 6357

Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively Coupled Plasma Mass Spectrometry, and Graphite Furnace Atomic Absorption Spectrometry

ASTM D 6376

Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy

ASTM D 4808

Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy

ASTM D 5483

Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry

ASTM D 6749

Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)

ASTM D 2511

Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants

ASTM D 5481

Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer

ASTM D 6546

Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydrualic Fluid Applications

ASTM D 7318

Standard Test Method for Total Inorganic Sulfate in Ethanol by Potentiometric Titration

ASTM D 3236

Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials

ASTM D 3519

Standard Test Method for Foam in Aqueous Media (Blender Test)

ASTM D 5454

Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers

ASTM D 6709

Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

ASTM D 2492

Standard Test Method for Forms of Sulfur in Coal

ASTM D 2532

Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants

ASTM D 3302

Standard Test Method for Total Moisture in Coal

ASTM D 3520

Standard Test Method for Quenching Time of Heat-Treating Fluids (Magnetic Quenchometer Method)-(Reinstated)

ASTM D 4054

Standard Practice for Evaluating the Compatibility of Additives with Aviation-Turbine Fuels and Aircraft Fuel System Materials

ASTM D 4419

Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)

ASTM D 7260

Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants

ASTM D 4072

Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch

ASTM C 749

Standard Test Method for Tensile Stress-Strain of Carbon and Graphite

ASTM D 1015

Standard Test Method for Freezing Points of High-Purity Hydrocarbons

ASTM D 7098

Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B

ASTM D 3601

Standard Test Method for Foam in Aqueous Media (Bottle Test)

ASTM D 5968

Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121 Degrees C

ASTM D 6074

Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils

ASTM D 3712

Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography

ASTM D 6296

Standard Test Method for Total Olefins in Spark-Ignition Engine Fuels by Multi-Dimensional Gas Chromatography

ASTM D 2789

Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry

ASTM D 6121 REV A

Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles

ASTM D 6920

Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection

ASTM D 1072

Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration

ASTM D 4047

Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method-IP Designation: 149/93

ASTM D 6743

Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids

ASTM C 565

Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials

ASTM D 4326

Standard Test Method for Major and Minor Elements in Coal and Coke Ash by X-Ray Fluorescence

ASTM D 4864

Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography

ASTM D 5183

Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine

ASTM D 5303

Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography

ASTM D 7224

Standard Test Method for Determining Water Separation Characteristics of Kerosinetype Aviation Turbine Fuels Containing Additives by Portable Separometer

ASTM C 747

Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance

ASTM D 3663

Standard Test Method for Surface Area of Catalysts and Catalyst Carriers

ASTM D 3827

Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids

ASTM D 5292

Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy

ASTM D 6974

Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid FuelsFiltration and Culture Procedures

ASTM D 7223

Standard Specification for Aviation Certification Turbine Fuel

ASTM D 2649

Standard Test Method for Corrosion Characteristics of Solid Film Lubricants

ASTM D 4742 REV A

Standard Test Method for Oxidation Stabiliy of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)

ASTM D 6203

Standard Test Method for Thermal Stability of Way Lubricants

ASTM D 2619

Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)

ASTM D 5187

Standard Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction

ASTM D 3527

Standard Test Method for Life Performance of Automotive Wheel Bearing Grease

ASTM D 6985 REV A

Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications

ASTM D 5442

Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography

ASTM D 5969

Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments

ASTM D 6021

Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection

ASTM C 709

Standard Terminology Relating to Manufactured Carbon and Graphite

ASTM D 4641

Standard Practice for Calculation of Pore Size Distributions of Catalysts from Nitrogen Desorption Isotherms

ASTM D 483

Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils

ASTM D 6138

Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases under Dynamic Wet Conditions (Emcor Test)

ASTM C 748

Standard Test Method for Rockwell Hardness of Graphite Materials

ASTM D 2638

Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer

ASTM D 2878

Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils

ASTM D 4046

Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry

ASTM D 6822

Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method-Designation: Manual of Petroleum Measurement Standards (MPMS), Chapter 9.3

ASTM D 6984

Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine

ASTM D 4284

Standard Test Method for Determining Pore Volume Distribution of Catalysts by Mercury Intrusion Porosimetry

ASTM D 6201

Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

ASTM D 6750

Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine 1K Procedure (0.4% Fuel Sulfur) and 1N Procedure (0.04% Fuel Sulfur)

ASTM D 5984

Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration

ASTM D 1550

Standard ASTM Butadiene Measurement Tables

ASTM D 3603

Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)

ASTM D 388

Standard Classification of Coals by Rank

ASTM D 6837

Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine

ASTM D 3239

Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry

ASTM D 6334

Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence

ASTM D 6445

Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry

ASTM D 7154

Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)-IP 528

ASTM D 1832

Standard Test Method for Peroxide Number of Petroleum Wax-TAPPI T 659 su-67

ASTM D 1833

Standard Test Method for Odor of Petroleum Wax-TAPPI T 654 ts-64; IP Designation: 185/69 (85)

ASTM D 6557

Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils

ASTM D 7216

Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers

ASTM D 6968

Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection

ASTM D 1826

Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter

ASTM D 4179

Standard Test Method for Single Pellet Crush Strength of Formed Catalyst Shapes

ASTM D 4222

Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements

ASTM D 4291

Standard Test Method for Trace Ethylene Glycol in Used Engine Oil

ASTM D 4292

Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke

ASTM D 6160

Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography

ASTM D 1263

Standard Test Method for Leakage Tendencies of Automotive Wheel Bearing Greases

ASTM D 4693

Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings

ASTM D 565

Standard Test Method for Carbonizable Substances in White Mineral Oil

ASTM D 2318

Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch

ASTM D 4290

Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions

ASTM D 4422

Standard Test Method for Ash in Analysis of Petroleum Coke

ASTM D 6080

Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids

ASTM D 6971

Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry

ASTM D 3523

Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)

ASTM D 4365

Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst

ASTM D 7220

Standard Test Method for Sulfur in Automotive Fuels by Polarization X-ray Fluorescence Spectrometry

ASTM D 3682

Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes

ASTM D 3707

Standard Test Method for Storage Stability of Water-In-Oil Emulsions by the Oven Test Method

ASTM D 5622

Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

ASTM D 5706

Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

ASTM D 5864

Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components

ASTM C 561

Standard Test Method for Ash in a Graphite Sample

ASTM D 4418

Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines

ASTM D 4702

Standard Practice for Quality Management of Mechanical Coal Sampling Systems

ASTM D 4998

Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids

ASTM D 6547

Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple

ASTM D 6794

Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6-h) Heating Time

ASTM D 2268

Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography

ASTM D 3179

Standard Test Methods for Nitrogen in the Analysis Sample of Coal and Coke

ASTM D 4871

Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus

ASTM D 5770

Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing

ASTM D 6425

Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine

ASTM D 3104

Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)

ASTM D 3829

Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil

ASTM D 4312 REV A

Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)

ASTM D 5273

Standard Guide for Analysis of Propylene Concentrates

ASTM D 6710

Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil

ASTM D 6761

Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers

ASTM D 1988

Standard Test Method for Mercaptans in Natural Gas Using Length-Of-Stain Detector Tubes

ASTM D 2320

Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)

ASTM D 5763

Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware

ASTM D 7317

Standard Test Method for Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method

ASTM D 1018

Standard Test Method for Hydrogen in Petroleum Fractions

ASTM D 4058

Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers

ASTM D 6728

Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

ASTM D 6897 REV A

Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)

ASTM C 838

Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes

ASTM D 197

Standard Test Method for Sampling and Fineness Test of Pulverized Coal

ASTM D 3704

Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

ASTM D 4567

Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method

ASTM D 4892

Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)

ASTM D 6748 REV A

Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

ASTM D 7109

Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles

ASTM D 1025

Standard Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene

ASTM D 2962

Standard Test Method for Calculating Volume-Temperature Correction for Coal-Tar Pitches

ASTM D 3766

Standard Terminology Relating to Catalysts and Catalysis

ASTM D 4208

Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method

ASTM D 5500

Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

ASTM D 7236

Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)

ASTM D 2416

Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)

ASTM D 2883

Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials

ASTM D 2884

Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method

ASTM D 3705

Standard Test Method for Misting Properties of Lubricating Fluids

ASTM D 4296

Standard Practice for Sampling Pitch

ASTM D 6795

Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time

ASTM D 6810

Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in HL Turbine Oils by Linear Sweep Voltammetry

ASTM D 2426

Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography

ASTM D 4164

Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers

ASTM D 4784

Standard Specification for LNG Density Calculation Models

ASTM D 5707

Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

ASTM D 4305 REV A

Standard Test Method for Filter Flow of Aviation Fuels at Low Temperatures

ASTM D 5056

Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption

ASTM D 6681

Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine - Caterpiller 1P Test Procedure

ASTM D 6891 REV A

Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine

ASTM D 6922

Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils