|
ASTM D 5419 |
Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures |
|
ASTM D 5998 |
Standard Specification for Molded Polyethylene Shipping and Storage Drums |
|
ASTM D 6247 |
Standard Test Method for Analysis of Elemental Content in Polyolefins by X-Ray Fluorescence Spectrometry |
|
ASTM D 7192 |
Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors |
|
ASTM F 2658 |
Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings |
|
ASTM F 610/F 610M REV A |
Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride)(PVC) Plastic Pipe Fittings by the Heat Reversion Technique |
|
ASTM F 725 |
Standard Practice for Drafting Impact Test Requirements in Thermoplastic Pipe and Fittings Standards |
|
ASTM D 6868 |
Standard Specification for Biodegradable Plastics Used as Coatings on Paper and Other Compostable Substrates |
|
ASTM D 6953 |
Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC) |
|
ASTM F 1865 REV A |
Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing |
|
ASTM F 689 |
Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe within Metallic Casings |
|
ASTM D 1636 |
Standard Specification for Allyl Molding Compounds |
|
ASTM D 4474 |
Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) |
|
ASTM D 5815 |
Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low- Density Polyethylene Using Liquid Chromatography (LC) |
|
ASTM D 6340 |
Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment |
|
ASTM D 6835 |
Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE) |
|
ASTM D 705 |
Standard Specification for Urea-Formaldehyde Molding Compounds |
|
ASTM D 3594 |
Standard Test Method for Copolymerized Ethyl Acrylate in Ethylene-Ethyl Acrylate Copolymers |
|
ASTM D 4443 |
Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography |
|
ASTM D 6260 |
Standard Test Method for Gravimetric Determination of Carbon Black in Nylon Materials (PA) |
|
ASTM D 6436 |
Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers |
|
ASTM D 3291 |
Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression |
|
ASTM D 6692 |
Standard Test Method for Determining the Biodegradability of Radiolabeled Polymeric Plastic Materials in Seawater |
|
ASTM D 6867 |
Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing |
|
ASTM D 2383 |
Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds under Humid Conditions |
|
ASTM D 3768 |
Standard Test Method for Microcellular Urethanes - Flexural Recovery |
|
ASTM D 5990 |
Standard Classification System for Polyketone Injection Molding and Extrusion Materials (PK) |
|
ASTM D 6437 |
Standard Test Method for Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols) |
|
ASTM D 6865 |
Standard Classification System for Acrylonitrile Styrene Acrylate (ASA) and Acrylonitrile EPDM Styrene (AES) Plastics and Alloys Molding and Extrusion Materials |
|
ASTM F 1735 |
Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits |
|
ASTM D 4754 |
Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell |
|
ASTM D 5017 |
Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance |
|
ASTM D 7134 |
Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/ Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS) |
|
ASTM D 7252 |
Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates |
|
ASTM D 4890 |
Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols |
|
ASTM D 5422 |
Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer |
|
ASTM D 5991 |
Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake |
|
ASTM D 6776 |
Standard Test Method for Determining Anaerobic Biodegradability of Radiolabeled Plastic Materials in a Laboratory-Scale Simulated Landfill Environment |
|
ASTM D 4634 |
Standard Specification for Styrene-Maleic Anhydride Materials (S/MA) |
|
ASTM D 4669 |
Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols |
|
ASTM D 6040 |
Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
|
ASTM D 6691 |
Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium |
|
ASTM D 7133 |
Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids |
|
ASTM D 7209 |
Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products |
|
ASTM D 1201 |
Standard Specification for Thermosetting Polyester Molding Compounds |
|
ASTM D 4166 |
Standard Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity Instrument |
|
ASTM D 6339 |
Standard Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS) |
|
ASTM D 2741 |
Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation |
|
ASTM D 7107 |
Standard Test Method for Creep Measurement of Self-Lubricating Bushings |
|
ASTM D 7253 |
Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols |
|
ASTM D 6099 |
Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates |
|
ASTM D 7132 |
Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam |
|
ASTM D 7251 |
Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products |
|
ASTM D 4877 |
Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates |
|
ASTM D 5951 |
Standard Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and Compost Quality Testing |
|
ASTM D 6288 |
Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing |
|
ASTM D 7026 |
Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis |
|
ASTM D 7082 |
Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe |
|
ASTM D 4659 |
Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates |
|
ASTM D 6979 |
Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen |
|
ASTM D 7083 |
Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography |
|
ASTM D 7029 |
Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0°F [82.2°C] |