ASTM D 5963

Standard Test Method for Rubber PropertyAbrasion Resistance (Rotary Drum Abrader)

ASTM F 1094

Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method

ASTM F 78

Standard Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards

ASTM F 91

Standard Practice for Testing for Leaks in the Filters Associated with Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector

ASTM D 176

Standard Test Methods for Solid Filling and Treating Compounds Used for Electrical Insulation

ASTM D 3185

Standard Test Methods for Rubber - Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures with Oil

ASTM D 3187

Standard Test Methods for Rubber - Evaluation of NBR (Acrylonitrile-Butadiene Rubber)

ASTM D 3380

Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates

ASTM D 619

Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation

ASTM D 7150

Standard Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress at Low Temperature

ASTM F 2357

Standard Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool RCA Abrader

ASTM F 72

Standard Specification for Gold Wire for Semiconductor Lead Bonding

ASTM F 2467

Standard Practice for Measuring Static Sealing Pressure Using Pressure- Indicating Film (PIF) in Transportation Applications

ASTM F 2592

Standard Test Method for Measuring the Force-Displacement of a Membrane Switch

ASTM D 3150

Standard Specification for Crosslinked and Noncrosslinked Poly (Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation

ASTM D 3667

Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors

ASTM D 6095

Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials

ASTM F 16

Standard Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps

ASTM D 2230

Standard Test Method for Rubber PropertyExtrudability of Unvulcanized Compounds

ASTM D 3056

Standard Test Method for Gel Time of Solventless Varnishes

ASTM D 3144

Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation

ASTM D 3284

Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters

ASTM D 4768

Standard Test Method for Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6-Ditertiary-Butyl Phenol in Insulating Liquids by Gas Chromatography

ASTM D 5230

Standard Test Method for Carbon BlackAutomated Individual Pellet Hardness

ASTM D 814

Standard Test Method for Rubber Property - Vapor Transmission of Volatile Liquids

ASTM F 1958/F 1958M

Standard Test Method for Determining the Ignitability of Non-Flame-Resistant Materials for Clothing by Electric Arc Exposure Method Using Mannequins

ASTM F 1812

Standard Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding

ASTM F 2378

Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials

ASTM D 3349

Standard Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black

ASTM D 3636

Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials

ASTM F 816

Standard Test Method for Combined Fine and Gross Leaks for Large Hybrid Microcircuit Packages

ASTM F 914

Standard Test Method for Acoustic Emission for Insulated and Non-Insulated Aerial Personnel Devices Without Supplemental Load Handling Attachments

ASTM D 2802

Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable

ASTM D 6602 REV B

Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both

ASTM F 147

Standard Test Method for Flexibility of Non-Metallic Gasket Materials

ASTM F 1574 REV A

Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures

ASTM D 2219

Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60 Degrees C Operation

ASTM D 2304

Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials

ASTM D 3314

Standard Test Method for RubberChemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices

ASTM F 1564

Standard Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers

ASTM F 2561

Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in- Place Liner

ASTM D 1698

Standard Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils

ASTM D 3265

Standard Test Method for Carbon Black - Tint Strength

ASTM F 2468

Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications

ASTM F 526

Standard Test Method for Measuring Dose for Use in Linear Accelerator Pulsed Radiation Effects Tests

ASTM F 76

Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors

ASTM D 1817

Standard Test Method for Rubber ChemicalsDensity

ASTM D 2759

Standard Practice for Sampling Gas from a Transformer Under Positive Pressure

ASTM D 3896

Standard Practice for Rubber From Synthetic Sources—Sampling

ASTM D 4514

Standard Specification for Friction Tape

ASTM F 1996

Standard Test Method for Silver Migration for Membrane Switch Circuirty

ASTM F 289

Standard Specification for Molybdenum Wire and Rod for Electronic Applications

ASTM F 96

Standard Specification for Electronic Grade Alloys of Copper and Nickel in Wrought Forms

ASTM D 3188

Standard Test Methods for Rubber - Evaluation of IIR (Isobutene-Isoprene Rubber)

ASTM D 4243

Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards

ASTM D 5424

Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

ASTM D 7103

Standard Guide for Assessment of Medical Gloves

ASTM F 1372

Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components

ASTM F 1701

Standard Specification for Unused Polypropylene Rope with Special Electrical Properties-]

ASTM F 478

Standard Specification for In-Service Care of Insulating Line Hose and Covers

ASTM D 1459

Standard Specification for Silicone Varnished Glass Cloth and Tape for Electrical Insulation

ASTM D 1618

Standard Test Method for Carbon Black Extractables - Transmittance of Toluene Extract

ASTM D 2226

Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use

ASTM D 2413

Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric

ASTM D 3853

Standard Terminology Relating to Rubber and Rubber LaticesAbbreviations for Chemicals Used in Compounding

ASTM D 4578

Standard Test Methods for Rubber ChemicalsDetermination of Percent Sulfur by Extraction

ASTM D 6049

Standard Test Method for Rubber PropertyMeasurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates

ASTM D 6284

Standard Test Method for Rubber Property - Effect of Aqueous Solutions with Available Chlorine and Chloramine

ASTM F 1512

Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies

ASTM F 31

Standard Specification for 42 % Nickel-6 % Chromium-Iron Sealing Alloy

ASTM D 2149

Standard Test Method for Permittivity (Dielectric Constant) and Dissipation Factor of Solid Dielectrics at Frequencies to 10 MHz and Temperatures to 500 Degrees C

ASTM D 2754

Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape

ASTM D 2945

Standard Test Method for Gas Content of Insulating Oils

ASTM D 3949

Standard Specification for Coated Glass Fabrics Used for Electrical Insulation

ASTM D 4652

Standard Specification for Silicone Fluid Used for Electrical Insulation

ASTM D 6601

Standard Test Method for Rubber PropertiesMeasurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer

ASTM F 1277

Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique

ASTM F 1373

Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components

ASTM F 1430

Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments

ASTM F 2114

Standard Guide for ASTM Standard Test Methods, Standard Practices, and Typical Values of a Membrane Switch

ASTM D 454

Standard Test Method for Rubber Deterioration by Heat and Air Pressure

ASTM D 5670

Standard Test Method for Rubber - Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry

ASTM D 6871

Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus

ASTM D 7121

Standard Test Method for Rubber PropertyResilience Using Schob Type Rebound Pendulum

ASTM F 1394

Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves

ASTM D 2144

Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption

ASTM D 3455

Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin

ASTM D 6054

Standard Practice for Conditioning Electrical Insulating Materials for Testing

ASTM F 1578

Standard Practice for Contact Closure Cycling of a Membrane Switch

ASTM F 1896

Test Method for Determining the Electrical Resistivity of a Printed Conductive Material

ASTM F 205

Standard Test Method for Measuring Diameter of Fine Wire by Weighing

ASTM F 448

Standard Test Method for Measuring Steady-State Primary Photocurrent-Supersedes A448M-94

ASTM D 1508

Standard Test Method for Carbon Black, Pelleted Fines and Attrition

ASTM D 1917

Standard Test Methods for Rubber Property - Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR)

ASTM D 1933

Standard Specification for Nitrogen Gas as an Electrical Insulating Material

ASTM D 2296

Standard Specification for Continuity of Quality of Electrical Insulating Polybutene Oil for Capacitors

ASTM D 2865M

Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing

ASTM D 3191

Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber) - Recipe and Evaluation Procedures

ASTM D 3579

Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type

ASTM D 5774

Standard Test Methods for Rubber - Chemical Analysis of Extractables

ASTM D 6194

Standard Test Method for Glow-Wire Ignition of Materials

ASTM D 866

Standard Specification for Crosslinked Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable

ASTM F 1797

Standard Test Method for Acoustic Emission Testing of Insulated Digger Derricks

ASTM D 1039

Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation

ASTM D 1511

Standard Test Method for Carbon BlackPellet Size Distribution

ASTM D 2484

Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape

ASTM D 5109

Standard Test Methods for Copper-Clad Thermosetting Laminates for Printed Wiring Boards

ASTM D 531

Standard Test Method for Rubber PropertyPusey and Jones Indentation

ASTM D 6124

Standard Test Method for Residual Powder on Medical Gloves

ASTM D 926

Standard Test Method for Rubber Property - Plasticity and Recovery (Parallel Plate Method)

ASTM F 1374

Standard Test Method for Ionic/Organic Extractables of Internal Surfaces-IC/GC/FTIR for Gas Distribution System Components

ASTM F 148

Standard Test Method for Binder Durability of Cork Composition Gasket Materials

ASTM F 1805

Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces

ASTM F 2493

Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire

ASTM F 868

Standard Classification for Laminated Composite Gasket Materials

ASTM D 1523

Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90 Degrees C Operation

ASTM D 1534

Standard Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration

ASTM D 2433

Standard Test Methods for Rubber Thread

ASTM D 3004

Standard Specification for Extruded Crosslinked and Thermoplastic Semi-Conducting, Conductor and Insulation Shielding Materials

ASTM D 3192

Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)

ASTM D 3277

Standard Test Methods for Moisture Content of Oil-Impregnated Cellulosic Insulation

ASTM D 3376

Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation

ASTM D 3493

Standard Test Method for Carbon BlackOil Absorption Number of Compressed Sample (COAN)

ASTM D 3772

Standard Specification for Natural Rubber Finger Cots

ASTM D 5376

Standard Test Method for Rubber Compounding MaterialsDetermination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ

ASTM F 1683

Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Tail Assembly or Membrane Switch Component

ASTM F 1971

Standard Test Method for Electrical Resistance of Tires under Load on the Test Bench

ASTM F 2072

Standard Practice for Hosedown of a Membrane Switch

ASTM F 408

Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer

ASTM F 996

Standard Test Method for Separating an Ionizing Radiation-Induced MOSFET Threshold Voltage Shift into Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold Current-Voltage Characteristics

ASTM D 3313 REV A

Standard Test Method for Carbon Black - Individual Pellet Hardness

ASTM D 5044

Standard Test Method for Rubber Compounding MaterialsFree 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)

ASTM D 6113

Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

ASTM F 1398

Standard Test Method for Determination of Total Hydrocarbon Contribution by Gas Distribution System Components

ASTM F 290

Standard Specification for Round Wire for Winding Electron Tube Grid Laterals

ASTM D 1931

Standard Specification for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation

ASTM D 3005

Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape

ASTM D 4568

Standard Test Methods for Evaluating Compatibility between Cable Filling and Flooding Compounds and Polyolefin Wire and Cable Materials

ASTM D 5288

Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)

ASTM D 5485

Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter

ASTM D 5712

Standard Test Method for the Analysis of Aqueous Extractable Protein in Natural Rubber and Its Products Using the Modified Lowry Method

ASTM F 1263

Standard Guide for Analysis of Overtest Data in Radiation Testing of Electronic Parts

ASTM F 1375

Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components

ASTM F 1650

Standard Practice for Evaluating Tire Traction Performance Data under Varying Test Conditions

ASTM F 2073

Standard Test Method for Non-Destructive Short Circuit Testing of a Membrane Switch

ASTM D 1456

Standard Test Method for Rubber Property - Elongation at Specific Stress

ASTM D 3189

Standard Test Methods for Rubber - Evaluation of Solution BR (Polybutadiene Rubber)

ASTM D 3190

Standard Test Method for Rubber - Evaluation of Chloroprene Rubber (CR)

ASTM D 3288

Standard Test Methods for Magnet-Wire Enamels

ASTM D 4821

Standard Guide for Carbon BlackValidation of Test Method Precision and Bias

ASTM D 5537

Standard Test Method for Heat Release, Flame Spread Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

ASTM D 5805

Standard Test Methods for RubberDetermination of Carbon Black in Masterbatches

ASTM F 1364

Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System

ASTM F 1742

Standard Specification for PVC Insulating Sheeting

ASTM F 434

Standard Test Method for Blow-Out Testing of Preformed Gaskets

ASTM F 528

Standard Test Method of Measurement of Common-Emitter D-C Current Gain of Junction Transistors

ASTM F 798

Standard Practice for Determining Gettering Rate, Sorption Capacity, and Gas Content of Nonevaporable Getters in the Molecular Flow Region

ASTM D 3849

Standard Test Method for Carbon BlackMorphological Characterization of Carbon Black Using Electron Microscopy

ASTM F 1572

Standard Test Methods for Tire Performance Testing on Snow and Ice Surfaces

ASTM F 1595

Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches

ASTM F 616M

Standard Test Method for Measuring MOSFET Drain Leakage Current (Metric)

ASTM F 744

Standard Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits

ASTM D 2449

Standard Specification for Rubber Bales From Natural Sources—Limit on Coating

ASTM D 3485

Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable

ASTM D 3554

Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 Degrees C Operation

ASTM D 411

Standard Test Methods for Shellac Used for Electrical Insulation

ASTM D 4730

Standard Specification for Flooding Compounds for Telecommunications Wire and Cable

ASTM D 4936

Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration

ASTM F 1260M

Standard Test Method for Estimating Electromigration Median Time-to-Failure and Sigma of Integrated Circuit Metallizations (Metric)

ASTM F 1596

Standard Practice for Exposure of Membrane Switches to Temperature and Relative Humidity

ASTM F 1649

Standard Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems

ASTM F 1796

Standard Specification for High Voltage Detectors - Part 1 Capacitive Type to Be Used for Voltages Exceeding 600 Volts AC

ASTM F 1893

Guide for Measurement of Ionizing Dose-Rate Burnout of Semiconductor Devices

ASTM F 1995

Standard Test Method for Determining the Bond Strength of a Surface Mount Device (SMD) on a Membrane Switch by Applying Shear Force

ASTM D 1305

Standard Specification for Electrical Insulating Paper and Paperboard - Sulfate (Kraft) Layer Type

ASTM D 2400

Standard Specification for Varnished Glass-Polyester Cloth Used for Electrical Insulation

ASTM D 2527

Standard Specification for Rubber Seals-Splice Strength

ASTM D 3006

Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape

ASTM D 3305

Standard Practice for Sampling Small Gas Volume in a Transformer

ASTM D 3809

Standard Methods of Testing Synthetic Dielectric Fluids for Capacitors

ASTM D 3958

Standard Test Methods for Rubber-Evaluation of BIIR and CIIR (Halogenated Isobutene-Isoprene Rubber)

ASTM D 5605

Standard Practice for Styrene-Butadiene Rubber (SBR)—Establishing Raw Mooney Viscosity Target Values

ASTM D 668

Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation

ASTM D 6978

Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs

ASTM F 1895

Practice for Submersion of a Membrane Switch

ASTM F 19

Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals

ASTM F 2174

Standard Practice for Verifying Acoustic Emission Sensor Response

ASTM F 377

Standard Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires

ASTM D 2522

Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation

ASTM D 3346

Standard Test Methods for Rubber PropertyProcessability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)

ASTM D 5604

Standard Test Methods for Precipitated Silica - Surface Area by Single Point B.E.T. Nitrogen Adsorption

ASTM D 6319 REV A

Standard Specification for Nitrile Examination Gloves for Medical Application

ASTM F 1709

Standard Specification for High Purity Titanium Sputtering Targets for Electronic Thin Film Applications

ASTM D 1766

Standard Test Method for Rubber Chemicals - Solubility

ASTM D 3394

Standard Test Methods for Sampling and Testing Electrical Insulating Board

ASTM D 3635

Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry

ASTM D 5900

Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)

ASTM D 6738

Standard Test Method for Precipitated Silica - Volatile Content

ASTM E 2544

Standard Terminology for Three-Dimensional (3-D) Imaging Systems

ASTM F 1598

Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)

ASTM F 2320

Standard Specification for Rubber Insulating Sheeting

ASTM F 73

Standard Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps

ASTM F 773M

Standard Practice for Measuring Dose Rate Response of Linear Integrated Circuits (Metric)

ASTM D 2129

Standard Test Method for Color of Clear Electrical Insulating Liquids (Platinum-Cobalt Scale)

ASTM D 2285

Standard Test Method for Interfacial Tension of Electrical Insulating Oils of Petroleum Origin Against Water by the Drop-Weight Method

ASTM D 2685

Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography

ASTM D 3157

Standard Test Method for Rubber from Natural SourcesColor

ASTM D 4004

Standard Test Methods for RubberDetermination of Metal Content by Flame Atomic Absorption (AAS) Analysis

ASTM D 4026

Standard Test Method for Rubber LatexStyrene-Butadiene Copolymer Determination of Residual Styrene

ASTM D 4731

Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable

ASTM D 5644

Standard Test Methods for Rubber Compounding Materials - Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber

ASTM D 6802

Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry

ASTM D 6915

Standard Practice for Carbon Black - Evaluation of Standard Reference Blacks

ASTM F 2466

Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications

ASTM F 724 REV A

Standard Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance

ASTM D 1460

Standard Test Method for Rubber Property - Change in Length During Liquid Immersion

ASTM D 2756

Standard Test Method for Weight Loss of Electrical Insulating Varnishes

ASTM D 3664

Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment

ASTM D 4075

Standard Test Methods for Rubber Compounding MaterialsFlame Atomic Absorption AnalysisDetermination of Metals

ASTM D 4583

Standard Practice for Carbon Black - Calculation of Process Indexes from an Analysis of Process Control Data

ASTM D 6180

Standard Test Method for Stability of Insulating Oils of Petroleum Origin under Electrical Discharge

ASTM F 1262M

Standard Guide for Transient Radiation Upset Threshold Testing of Digital Integrated Circuits (Metric)

ASTM F 1397

Standard Test Method for Determination of Moisture Contribution by Gas Distribution System Components

ASTM F 1806

Standard Practice for Tire Testing Operations - Basic Concepts and Terminology for Reference Tire Use

ASTM F 2522

Standard Test Method for Determining the Protective Performance of a Shield Attached on Live Line Tools or on Racking Rods for Electric Arc Hazards

ASTM D 1677

Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation

ASTM D 2518

Standard Specification for Woven Glass Fabrics for Electrical Insulation

ASTM D 352

Standard Test Methods for Pasted Mica Used in Electrical Insulation

ASTM D 4246

Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90 Degrees C Operation

ASTM D 4315

Standard Test Methods for Rubber Compounding Material - Zinc Oxide

ASTM D 5297

Standard Test Methods for Rubber Chemical Accelerator-Purity by High Performance Liquid Chromatography

ASTM D 5425

Standard Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products

ASTM F 1367

Standard Specification for Chromium Sputtering Targets for Thin Film Applications

ASTM F 1593

Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer

ASTM F 1689

Standard Test Method for Determining the Insulation Resistance of a Membrane Switch

ASTM F 2187

Standard Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly

ASTM F 357

Standard Practice for Determining Solderability of Thick Film Conductors

ASTM F 457

Standard Test Method for Speed and Distance Calibration of a Fifth Wheel Equipped with Either Analog or Digital Instrumentation

ASTM F 870

Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements

ASTM D 3283

Standard Specification for Air as an Electrical Insulating Material

ASTM D 4122

Standard Practice for Carbon BlackEvaluation of an Industry Reference Black

ASTM D 4872

Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds

ASTM D 4881

Standard Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire

ASTM D 5282

Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation

ASTM D 5902

Standard Test Method for Rubber - Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value

ASTM D 669

Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials

ASTM F 1261M

Standard Test Method for Determining the Average Electrical Width of a Straight, Thin-Film Metal Line [Metric]

ASTM F 1513

Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications

ASTM F 1662

Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch

ASTM F 1710

Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer

ASTM F 1761

Standard Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets

ASTM F 2321

Standard Specification for Flexible Insulated Temporary By-Pass Jumpers

ASTM F 2523

Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers

ASTM F 358

Standard Test Method for Wavelength of Peak Photoluminescence and the Corresponding Composition of Gallium Arsenide Phosphide Wafers

ASTM F 4

Standard Specification for Carbonized Nickel Strip and Carbonized Nickel-Plated and Nickel-Clad Steel Strip for Electron Tubes

ASTM F 421

Standard Test Method for Measuring Groove and Void Depth in Passenger Car Tires

ASTM F 559

Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel

ASTM F 615M

Standard Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components (Metric)

ASTM F 762

Standard Test Method for Determining Change in Groove (or Void) Depth with Distance Traveled for Passenger Car Tires

ASTM D 1082

Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica

ASTM D 3765

Standard Test Method for Carbon BlackCTAB (Cetyltrimethylammonium Bromide) Surface Area

ASTM D 4679

Standard Specification for Rubber General Purpose, Household or Beautician Gloves

ASTM D 5051

Standard Test Method for Rubber Compounding MaterialsBenzothiazyl Disulfide (MBTS)Assay

ASTM D 5460

Standard Test Method for Rubber Compounding MaterialsWater in Rubber Additives

ASTM D 6053

Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes

ASTM D 6746

Standard Test Method for Raw Rubber or Unvulcanized CompoundsDetermination of Tensile Green Strength

ASTM F 1238

Standard Specification for Refractory Silicide Sputtering Targets for Microelectronic Applications

ASTM F 1259M

Standard Guide for Design of Flat, Straight-Line Test Structures for Detecting Metallization Open-Circuit or Resistance-Increase Failure Due to Electromigration [Metric]

ASTM F 1396

Standard Test Method for Determination of Oxygen Contribution by Gas Distribution System Components

ASTM F 1594

Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications

ASTM F 1597

Standard Test Method for Determining the Actuation Force and Contact Force of a Membrane Switch

ASTM F 204

Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire

ASTM F 414

Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger

ASTM F 538

Standard Terminology Relating to the Characteristics and Performance of Tires

ASTM D 1168

Standard Test Methods for Hydrocarbon Waxes Used for Electrical Insulation

ASTM D 1937

Standard Test Method for Carbon Black, Pelleted - Mass Strength

ASTM D 1991

Standard Test Method for Rubber Chemicals - 2- Mercaptobenzothiazole (MBT) - Assay

ASTM D 2131

Standard Classification for Natural Muscovite Mica Splittings

ASTM D 3377

Standard Test Method for Weight Loss of Solventless Varnishes

ASTM D 6097 REV A

Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials

ASTM D 6355

Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves

ASTM F 1016

Standard Practice for Linear Tire Treadwear Data Analysis

ASTM F 1046

Standard Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing

ASTM F 1894

Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness

ASTM F 744M

Standard Test Method for Measuring Dose Rate Threshold for Upset of Digital Intergrated Circuits (Metric)

ASTM D 1992

Standard Guide for Testing Synthetic Plasticizers Used in Rubber

ASTM D 2132

Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials

ASTM D 3484

Standard Test Methods for RubberEvaluation of Oil-Extended Solution BR (Polybutadiene Rubber)

ASTM D 6181

Standard Test Method for Measurement of Turbidity in Mineral Insulating Oil of Petroleum Origin

ASTM D 6814

Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density

ASTM F 1276

Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials

ASTM F 1680

Standard Test Method for Determining Circuit Resistance of a Membrane Switch

ASTM F 1825

Standard Specification for Clampstick Type Live Line Tools

ASTM F 2188

Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly

ASTM F 3 REV A

Standard Specification for Nickel Strip for Electron Tubes

ASTM F 495 REV A

Standard Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures

ASTM F 806 REV A

Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials

ASTM D 2284

Standard Test Method for Acidity of Sulfur Hexafluoride

ASTM D 3194

Standard Test Method for Rubber from Natural Sources - Plasticity Retention Index (PRI)

ASTM D 3353

Standard Test Methods for Fibrous-Insulated Magnet Wire