|
ASTM 00.01 |
ANNUAL BOOK OF ASTM STANDARDS - SUBJECT INDEX; ALPHANUMERIC LIST |
|
ASTM A 1 |
Standard Specification for Carbon Steel Tee Rails |
|
ASTM A 100 |
Standard Specification for Ferrosilicon |
|
ASTM A 1000 |
Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality |
|
ASTM A 1001 |
Standard Specification for High Strength Steel Castings in Heavy Sections |
|
ASTM A 1002 |
Standard Specification for Castings, Nickel-Aluminum Ordered Alloy |
|
ASTM A 1003/A 1003M |
Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic- Coated for Cold-Formed Framing Members |
|
ASTM A 1004/A 1004M |
Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members |
|
ASTM A 1005/A 1005M |
Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded |
|
ASTM A 1006/A 1006M |
Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded |
|
ASTM A 1007 |
Standard Specification for Carbon Steel Wire for Wire Rope |
|
ASTM A 1008/A 1008M REV B |
Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High- Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable |
|
ASTM A 1009 |
Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications |
|
ASTM A 101 |
Standard Specification for Ferrochromium |
|
ASTM A 1010/A 1010M |
Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip |
|
ASTM A 1011/A 1011M REV A |
Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High- Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability |
|
ASTM A 1012 |
Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes with Integral Fins |
|
ASTM A 1013 |
Standard Test Method for High-Frequency (10 KHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter- Wattmeter Method |
|
ASTM A 1014 |
Standard Specification for Precipitation-Hardening Bolting Material (UNS N07718) for High Temperature Service |
|
ASTM A 1015 |
Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications |
|
ASTM A 1016/A 1016M REV A |
Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes |
|
ASTM A 1017/A 1017M |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
|
ASTM A 1018/A 1018M REV B |
Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot- Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, and High-Strength Low- Alloy with Improved Formability |
|
ASTM A 1019/A 1019M |
Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains |
|
ASTM A 102 |
Standard Specification for Ferrovanadium |
|
ASTM A 1020/A 1020M |
Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications |
|
ASTM A 1021/A 1021M |
Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service |
|
ASTM A 1022 |
Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement |
|
ASTM A 1023/A 1023M |
Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes |
|
ASTM A 1024/A 1024M |
Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless |
|
ASTM A 1025 |
Standard Specification for Ferroalloys and Other Alloying Materials, General Requirements |
|
ASTM A 1026 |
Standard Specification for Alloy Steel Structural Shapes for Use in Building Framing1 |
|
ASTM A 1028 |
Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils |
|
ASTM A 1030/A 1030M |
Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products |
|
ASTM A 1031 |
Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled |
|
ASTM A 1032 |
Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe |
|
ASTM A 1033 |
Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations |
|
ASTM A 1034/A 1034M REV B |
Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars |
|
ASTM A 1035/A 1035M |
Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement |
|
ASTM A 1036 |
Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers |
|
ASTM A 1037/A 1037M |
Standard Specification for Steel Line Pipe, Black, Furnace-Butt- Welded |
|
ASTM A 1038 |
Standard Practice for Portable Hardness Testing by the Ultrasonic Contact Impedance Method |
|
ASTM A 1039/A 1039M |
Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial and Structural, Produced by the Twin-Roll Casting Process |
|
ASTM A 1040 |
Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels |
|
ASTM A 1041/A 1041M |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten |
|
ASTM A 1042/A 1042M |
Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains |
|
ASTM A 1043/A 1043M |
Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings |
|
ASTM A 1044/A 1044M |
Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete |
|
ASTM A 1045 |
Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Water Closets to Sanitary Drainage System |
|
ASTM A 1047/A 1047M |
Standard Test Method for Pneumatic Leak Testing of Tubing |
|
ASTM A 105/A 105M |
Standard Specification for Carbon Steel Forgings for Piping Applications |
|
ASTM A 106/A 106M REV B |
Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service |
|
ASTM A 108 |
Standard Specification for Steel Bar, Carbon and Alloy, Cold- Finished |
|
ASTM A 109/A 109M |
Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled |
|
ASTM A 111 REV A |
Standard Specification for Zinc-Coated (Galvanized) Iron Telephone and Telegraph Line Wire |
|
ASTM A 116 |
Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric |
|
ASTM A 121 |
Standard Specification for Metallic-Coated Carbon Steel Barbed Wire |
|
ASTM A 123/A 123M |
Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
|
ASTM A 125 |
Standard Specification for Steel Springs, Helical, Heat-Treated |
|
ASTM A 126 |
Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings |
|
ASTM A 128/A 128M |
Standard Specification for Steel Castings, Austenitic Manganese |
|
ASTM A 131/A 131M REV A |
Standard Specification for Structural Steel for Ships |
|
ASTM A 132 |
Standard Specification for Ferromolybdenum |
|
ASTM A 134 |
Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and over) |
|
ASTM A 135 |
Standard Specification for Electric-Resistance-Welded Steel Pipe |
|
ASTM A 139/A 139M |
Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) |
|
ASTM A 143/A 143M |
Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement |
|
ASTM A 144 |
Standard Specification for Ferrotungsten |
|
ASTM A 146 |
Standard Specification for Molybdenum Oxide Products |
|
ASTM A 148/A 148M |
Standard Specification for Steel Castings, High Strength, for Structural Purposes |
|
ASTM A 153/A 153M |
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware-AASHTO No.: M232 |
|
ASTM A 159 |
Standard Specification for Automotive Gray Iron Castings |
|
ASTM A 167 |
Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
|
ASTM A 176 |
Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip |
|
ASTM A 178/A 178M |
Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes |
|
ASTM A 179/A 179M REV A |
Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat- Exchanger and Condenser Tubes |
|
ASTM A 181/A 181M |
Standard Specification for Carbon Steel Forgings, for General-Purpose Piping |
|
ASTM A 182/A 182M REV A |
Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
|
ASTM A 183 |
Standard Specification for Carbon Steel Track Bolts and Nuts |
|
ASTM A 184/A 184M |
Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement |
|
ASTM A 185/A 185M REV A |
Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete |
|
ASTM A 192/A 192M |
Standard Specification for Seamless Carbon Steel Boiler Tubes for High- Pressure Service |
|
ASTM A 194/A 194M REV B |
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
|
ASTM A 2 |
Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
|
ASTM A 20/A 20M |
Standard Specification for General Requirements for Steel Plates for Pressure Vessels |
|
ASTM A 203/A 203M |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel |
|
ASTM A 204/A 204M |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum |
|
ASTM A 209/A 209M |
Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes |
|
ASTM A 210/A 210M |
Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes |
|
ASTM A 213/A 213M REV C |
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
|
ASTM A 214/A 214M |
Standard Specification for Electric-Resistance-Welded Carbon Steel Heat- Exchanger and Condenser Tubes |
|
ASTM A 216/A 216M |
Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service |
|
ASTM A 217/A 217M |
Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
|
ASTM A 220/A 220M |
Standard Specification for Pearlitic Malleable Iron |
|
ASTM A 225/A 225M |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel |
|
ASTM A 227/A 227M |
Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs |
|
ASTM A 228/A 228M |
Standard Specification for Steel Wire, Music Spring Quality |
|
ASTM A 229/A 229M |
Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs |
|
ASTM A 230/A 230M |
Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality |
|
ASTM A 231/A 231M |
Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire |
|
ASTM A 232/A 232M |
Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire |
|
ASTM A 234/A 234M REV A |
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
|
ASTM A 239 |
Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles |
|
ASTM A 240/A 240M REV A |
Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
|
ASTM A 242/A 242M |
Standard Specification for High-Strength Low-Alloy Structural Steel- AASHTO No.: M 161 |
|
ASTM A 247 |
Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings |
|
ASTM A 249/A 249M REV A |
Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat- Exchanger, and Condenser Tubes |
|
ASTM A 250/A 250M |
Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes |
|
ASTM A 252 |
Standard Specification for Welded and Seamless Steel Pipe Piles |
|
ASTM A 254 |
Standard Specification for Copper-Brazed Steel Tubing |
|
ASTM A 255 |
Standard Test Methods for Determining Hardenability of Steel |
|
ASTM A 262 REV A |
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
|
ASTM A 263 |
Standard Specification for Stainless Chromium Steel-Clad Plate |
|
ASTM A 264 |
Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate |
|
ASTM A 265 |
Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate |
|
ASTM A 266/A 266M REV A |
Standard Specification for Carbon Steel Forgings for Pressure Vessel Components |
|
ASTM A 268/A 268M REV A |
Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
|
ASTM A 269 |
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
|
ASTM A 27/A 27M |
Standard Specification for Steel Castings, Carbon, for General Application |
|
ASTM A 270 REV A |
Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing |
|
ASTM A 275/A 275M |
Standard Test Method for Magnetic Particle Examination of Steel Forgings |
|
ASTM A 276 REV A |
Standard Specification for Stainless Steel Bars and Shapes |
|
ASTM A 278/A 278M |
Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650 Degrees F (350 Degrees C) |
|
ASTM A 283/A 283M |
Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates |
|
ASTM A 285/A 285M |
Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength |
|
ASTM A 288 |
Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators |
|
ASTM A 289/A 289M |
Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators |
|
ASTM A 29/A 29M |
Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for |
|
ASTM A 290/A 290M |
Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears |
|
ASTM A 291/A 291M |
Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears |
|
ASTM A 295/A 295M |
Standard Specification for High-Carbon Anti-Friction Bearing Steel |
|
ASTM A 297/A 297M |
Standard Specification for Steel Castings, Iron-Chromium and Iron- Chromium-Nickel, Heat Resistant, for General Application |
|
ASTM A 299/A 299M |
Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon |
|
ASTM A 3 |
Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated) |
|
ASTM A 302/A 302M |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
|
ASTM A 304 |
Standard Specification for Carbon and Alloy Steel Bars Subject to End- Quench Hardenability Requirements |
|
ASTM A 307 |
Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength |
|
ASTM A 308/A 308M |
Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process |
|
ASTM A 309 |
Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test |
|
ASTM A 31 |
Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels |
|
ASTM A 311/A 311M |
Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements |
|
ASTM A 312/A 312M REV A |
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
|
ASTM A 313/A 313M |
Standard Specification for Stainless Steel Spring Wire |
|
ASTM A 314 |
Standard Specification for Stainless Steel Billets and Bars for Forging |
|
ASTM A 319 |
Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts |
|
ASTM A 320/A 320M REV A |
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service |
|
ASTM A 321 |
Standard Specification for Steel Bars, Carbon, Quenched and Tempered |
|
ASTM A 322 |
Standard Specification for Steel Bars, Alloy, Standard Grades |
|
ASTM A 323 |
Standard Specification for Ferroboron |
|
ASTM A 324 |
Standard Specification for Ferrotitanium |
|
ASTM A 325 REV B |
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength-AASHTO No.: M 164 |
|
ASTM A 325M |
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric] |
|
ASTM A 328/A 328M |
Standard Specification for Steel Sheet Piling-AASHTO No.: M 202 |
|
ASTM A 333/A 333M |
Standard Specification for Seamless and Welded Steel Pipe for Low- Temperature Service |
|
ASTM A 334/A 334M REV A |
Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service |
|
ASTM A 335/A 335M REV A |
Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High- Temperature Service |
|
ASTM A 336/A 336M |
Standard Specification for Alloy Steel Forgings for Pressure and High- Temperature Parts |
|
ASTM A 338 |
Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures up to 650 Degrees F (345 Degrees C) |
|
ASTM A 34/A 34M |
Standard Practice for Sampling and Procurement Testing of Magnetic Materials |
|
ASTM A 340 REV A |
Standard Terminology of Symbols and Definitions Relating to Magnetic Testing |
|
ASTM A 341/A 341M |
Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods |
|
ASTM A 342/A 342M |
Standard Test Methods for Permeability of Feebly Magnetic Materials |
|
ASTM A 343/A 343M |
Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame |
|
ASTM A 345 |
Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications |
|
ASTM A 348/A 348M |
Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame |
|
ASTM A 350/A 350M REV A |
Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components |
|
ASTM A 351/A 351M |
Standard Specification for Castings, Austenitic, for Pressure-Containing Parts |
|
ASTM A 352/A 352M |
Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service |
|
ASTM A 353/A 353M |
Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered |
|
ASTM A 354 |
Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners |
|
ASTM A 355 |
Standard Specification for Steel Bars, Alloys, for Nitriding |
|
ASTM A 356/A 356M |
Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines |
|
ASTM A 358/A 358M |
Standard Specification for Electric-Fusion-Welded Austenitic Chromium- Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
|
ASTM A 36/A 36M |
Standard Specification for Carbon Structural Steel |
|
ASTM A 363 |
Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand |
|
ASTM A 367 |
Standard Test Methods of Chill Testing of Cast Iron |
|
ASTM A 368 REV A |
Standard Specification for Stainless Steel Wire Strand |
|
ASTM A 369/A 369M |
Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service |
|
ASTM A 370 |
Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
|
ASTM A 372/A 372M |
Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels |
|
ASTM A 376/A 376M |
Standard Specification for Seamless Austenitic Steel Pipe for High- Temperature Central-Station Service |
|
ASTM A 377 |
Standard Index of Specifications for Ductile-Iron Pressure Pipe |
|
ASTM A 380 |
Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
|
ASTM A 381 |
Standard Specification for Metal-Arc-Welded Steel Pipe for Use with High- Pressure Transmission Systems |
|
ASTM A 384/A 384M |
Standard Practice for Safeguarding Against Warpage and Distortion During Hot- Dip Galvanizing of Steel Assemblies |
|
ASTM A 385 |
Standard Practice for Providing High-Quality Zinc Coatings (Hot- Dip) |
|
ASTM A 387/A 387M REV A |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Molybdenum |
|
ASTM A 388/A 388M |
Standard Practice for Ultrasonic Examination of Heavy Steel Forgings |
|
ASTM A 389/A 389M |
Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service |
|
ASTM A 390 |
Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) |
|
ASTM A 391/A 391M |
Standard Specification for Grade 80 Alloy Steel Chain |
|
ASTM A 392 |
Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
|
ASTM A 394 |
Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare |
|
ASTM A 395/A 395M |
Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
|
ASTM A 400 |
Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties |
|
ASTM A 401/A 401M |
Standard Specification for Steel Wire, Chromium-Silicon Alloy |
|
ASTM A 403/A 403M |
Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
|
ASTM A 407 |
Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs |
|
ASTM A 409/A 409M |
Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
|
ASTM A 411 |
Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire |
|
ASTM A 413/A 413M |
Standard Specification for Carbon Steel Chain |
|
ASTM A 414/A 414M |
Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels |
|
ASTM A 416/A 416M |
Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete |
|
ASTM A 417 |
Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square- Formed, and Sinuous-Type Upholstery Spring Units |
|
ASTM A 418/A 418M |
Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings |
|
ASTM A 420/A 420M |
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
|
ASTM A 421/A 421M |
Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete-AASHTO No.: M 204 |
|
ASTM A 423/A 423M |
Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes |
|
ASTM A 424 |
Standard Specification for Steel, Sheet, for Porcelain Enameling |
|
ASTM A 426/A 426M |
Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service |
|
ASTM A 427 |
Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction |
|
ASTM A 428/A 428M |
Standard Test Method for Weight (Mass) of Coating on Aluminum-Coated Iron or Steel Articles |
|
ASTM A 434 |
Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered |
|
ASTM A 435/A 435M |
Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
|
ASTM A 436 |
Standard Specification for Austenitic Gray Iron Castings |
|
ASTM A 437/A 437M |
Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service |
|
ASTM A 439 |
Standard Specification for Austenitic Ductile Iron Castings |
|
ASTM A 447/A 447M |
Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25- 12 Class), for High-Temperature Service |
|
ASTM A 449 REV B |
Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/ 105/90 ksi Minimum Tensile Strength, General Use |
|
ASTM A 450/A 450M REV A |
Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes |
|
ASTM A 451/A 451M |
Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High- Temperature Service |
|
ASTM A 453/A 453M |
Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels |
|
ASTM A 455/A 455M |
Standard Specification for Pressure Vessel Plates, Carbon Steel, High- Strength Manganese |
|
ASTM A 456/A 456M |
Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings |
|
ASTM A 459 |
Standard Specification for Zinc-Coated Flat Steel Armoring Tape |
|
ASTM A 460 |
Standard Specification for Copper-Clad Steel Wire Strand |
|
ASTM A 463/A 463M |
Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process |
|
ASTM A 466/A 466M |
Standard Specification for Weldless Chain |
|
ASTM A 467/A 467M |
Standard Specification for Machine and Coil Chain |
|
ASTM A 469/A 469M |
Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors |
|
ASTM A 47/A 47M |
Standard Specification for Ferritic Malleable Iron Castings |
|
ASTM A 470/A 470M |
Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts |
|
ASTM A 471 |
Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels |
|
ASTM A 472/A 472M |
Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings |
|
ASTM A 473 |
Standard Specification for Stainless Steel Forgings |
|
ASTM A 474 |
Standard Specification for Aluminum-Coated Steel Wire Strand |
|
ASTM A 475 |
Standard Specification for Zinc-Coated Steel Wire Strand |
|
ASTM A 476/A 476M |
Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
|
ASTM A 478 |
Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
|
ASTM A 479/A 479M REV A |
Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
|
ASTM A 48/A 48M |
Standard Specification for Gray Iron Castings |
|
ASTM A 480/A 480M |
Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
|
ASTM A 481 |
Standard Specification for Chromium Metal |
|
ASTM A 482 |
Standard Specification for Ferrochrome-Silicon |
|
ASTM A 483 |
Standard Specification for Silicomanganese |
|
ASTM A 484/A 484M REV A |
Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings |
|
ASTM A 485 |
Standard Specification for High Hardenability Antifriction Bearing Steel |
|
ASTM A 487/A 487M |
Standard Specification for Steel Castings Suitable for Pressure Service |
|
ASTM A 488/A 488M |
Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel |
|
ASTM A 489 |
Standard Specification for Carbon Steel Lifting Eyes |
|
ASTM A 49 |
Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars |
|
ASTM A 490 REV A |
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength-AASHTO No.: M 253 |
|
ASTM A 490M REV A |
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] |
|
ASTM A 491 |
Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric |
|
ASTM A 492 |
Standard Specification for Stainless Steel Rope Wire |
|
ASTM A 493 |
Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
|
ASTM A 494/A 494M |
Standard Specification for Castings, Nickel and Nickel Alloy |
|
ASTM A 495 |
Standard Specification for Calcium-Silicon Alloys |
|
ASTM A 496/A 496M |
Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement |
|
ASTM A 497/A 497M REV A |
Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete |
|
ASTM A 498 |
Standard Specification for Seamless and Welded Carbon Steel Heat- Exchanger Tubes with Integral Fins |
|
ASTM A 499 |
Standard Specification for Steel Bars and Shapes, Carbon Rolled from T Rails |
|
ASTM A 500 REV A |
Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
|
ASTM A 501 |
Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing |
|
ASTM A 502 |
Standard Specification for Rivets, Steel, Structural |
|
ASTM A 503/A 503M |
Standard Specification for Ultrasonic Examination of Forged Crankshafts |
|
ASTM A 504/A 504M |
Standard Specification for Wrought Carbon Steel Wheels |
|
ASTM A 505 |
Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold- Rolled, General Requirements for |
|
ASTM A 506 |
Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled |
|
ASTM A 507 |
Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled |
|
ASTM A 508/A 508M REV B |
Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels |
|
ASTM A 510 |
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel |
|
ASTM A 510M |
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric] |
|
ASTM A 511 |
Standard Specification for Seamless Stainless Steel Mechanical Tubing |
|
ASTM A 512 |
Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing |
|
ASTM A 513 |
Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing |
|
ASTM A 514/A 514M |
Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding |
|
ASTM A 515/A 515M |
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
|
ASTM A 516/A 516M |
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
|
ASTM A 517/A 517M |
Standard Specification for Pressure Vessel Plates, Alloy Steel, High- Strength, Quenched and Tempered |
|
ASTM A 518/A 518M |
Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
|
ASTM A 519 |
Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
|
ASTM A 521 |
Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use |
|
ASTM A 522/A 522M |
Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service |
|
ASTM A 523 |
Standard Specification for Plain End Seamless and Electric-Resistance- Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
|
ASTM A 524 |
Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures |
|
ASTM A 529/A 529M |
Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality |
|
ASTM A 53/A 53M |
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
|
ASTM A 530/A 530M REV A |
Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe |
|
ASTM A 531/A 531M |
Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings |
|
ASTM A 532/A 532M REV A |
Standard Specification for Abrasion-Resistant Cast Irons |
|
ASTM A 533/A 533M |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
|
ASTM A 534 |
Standard Specification for Carburizing Steels for Anti-Friction Bearings |
|
ASTM A 536 |
Standard Specification for Ductile Iron Castings |
|
ASTM A 537/A 537M |
Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon- Manganese-Silicon Steel |
|
ASTM A 540/A 540M |
Standard Specification for Alloy-Steel Bolting Materials for Special Applications |
|
ASTM A 541/A 541M |
Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components |
|
ASTM A 542/A 542M |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched- And-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium |
|
ASTM A 543/A 543M |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum |
|
ASTM A 550 |
Standard Specification for Ferrocolumbium |