|
AWS D10.7M/D10.7 |
Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe |
|
AWS D18.1 |
Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygienic) Applications |
|
AWS D3.7 |
Guide for Aluminum Hull Welding |
|
AWS WQAG |
Welding Quality Assurance Guideline for Fabricators |
|
AWS AWS FUMES AND GASES |
The environment surrounding many welding processes contains fumes (particulate matter) that may be harmful (toxic) or relatively hanniess and gases that may have pulmonary or non-pulmonary effects. |
|
AWS C1.2 |
Recommended Practices for Spot Welding Aluminium and Aluminium Alloys |
|
AWS C2.18 ERTA |
Guide for the Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and Their Alloys and Composites |
|
AWS EG4.0 |
Guide for the Training and Qualification of Welding Personnel Level III - Expert Welder |
|
AWS PRGT |
The Practical Reference Guide for Welding Titanium |
|
AWS A5.02/A5.02M |
Specification for Filler Metal Standard Sizes, Packaging, and Physical Attributes-1st Edition |
|
AWS B2.1-1-008 |
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1, P-1 or S-1), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License |
|
AWS B2.1-1-020 |
Standard Welding Procedure Specification (WPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E70T-1 and E71T-1, As-Welded or PWHT Condition Site License |
|
AWS C3.8M/C3.8 |
SPECIFICATION FOR THE ULTRASONIC EXAMINATION OF BRAZED JOINTS |
|
AWS C5.2 |
Recommended Practices for Plasma Arc Cutting and Gouging |
|
AWS CC-IM |
Code Clinic for Study of AWS D1.1 Structural Welding code - Steel |
|
AWS A5.2/A5.2M |
Specification for Carbon and Low- Alloy Steel Rods for Oxyfuel Gas Welding |
|
AWS A9.1 |
Standard Guide for Describing Arc Welds in Computerized Material Property and Nondestructive Examination Databases |
|
AWS API-IM |
Code Clinic for Study of API Standard 1104 Eighteenth Edition Welding of Pipelines and Related Facilities - Instruction Manual |
|
AWS ARE-11 |
Mechanized, Automated, and Robotic Welding |
|
AWS B2.1-1/8-227 |
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick, ER309(L), As-Welded Condition, Primarily Pipe Applications Site License |
|
AWS C4.4/C4.4M |
Recommended Practices for Heat Shaping and Straightening with Oxyfuel Gas Heating Torches |
|
AWS C6.2/C6.2M |
Specification for Friction Welding of Metals |
|
AWS G2.1M/G2.1 |
Guide for the Joining of Wrought Nickel-Based Alloys-Reprinted, Incorporates Errata: October 2003 |
|
AWS PASS |
Professional´s Advisor on Welding Stainless Steels |
|
AWS QC11 |
Specification for Qualification and Certification for Level II - Advanced Welders |
|
AWS B2.1-1-018 |
Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E71T-8, As-Welded Condition Site License |
|
AWS B2.1-1-201 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications Site License |
|
AWS B2.1-1-208 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition (Primarily Pipe Applications) |
|
AWS B2.1-8-024 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 Through 1-1/2 Inch Thick, ER3XX, As-Welded Condition Primarily Plate and Structural Applications Site |
|
AWS F4.1 |
Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping |
|
AWS A5.24/A5.24M |
Specification for Zirconium and Zirconium-Alloy Welding Electrodes and Rods |
|
AWS D10.13/D10.13M |
Recommended Practices for the Brazing of Copper Tubing and Fittings for Medical Gas Systems |
|
AWS D14.2 |
Specification for Metal Cutting Machine Tool Weldments |
|
AWS D14.5 |
Specification for Welding of Presses and Press Components |
|
AWS EG3.0 |
Guide for the Training and Qualification of Welding Personnel Level II - Advanced Welder |
|
AWS PRGVT |
The Practical Reference Guide for Welding Inspection Management - Visual Inspection of Pressure Vessels and Pressure Piping |
|
AWS QC10 |
Specification for Qualification and Registration of Level IEntry Welders |
|
AWS WPP W |
Welding Processes and Practices Workbook |
|
AWS B2.1-1-011 |
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Galvanized Steel(M-1), 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing Site License-Incorporates Errata: 01/2005 |
|
AWS B2.1-1-021 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition Site License |
|
AWS B2.1-8-212 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 Through 1-1/2 Inch Thick, ER3XX, As-Welded Condition, Primarily Pipe Applications |
|
AWS CMWS |
CERTIFIED WELDING SUPERVISOR MANUAL FOR QUALITY AND PRODUCTIVITY IMPROVEMENT |
|
AWS D1.9/D1.9M |
Structural Welding Code- Titanium |
|
AWS A5.25/A5.25M |
Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding |
|
AWS B2.1-1-235 |
Standard Welding Procedure Specification (SWPS) for Argon plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, ER70S-3, Flat Position Only, As-Welded or PWHT Condition, Primarily Pipe Applications |
|
AWS B2.1-8-009 |
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8,P-8,or S-8), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License |
|
AWS B5.9 |
Specification for the Qualification of Welding Supervisors |
|
AWS C4.5M |
Uniform Designation System for Oxyfuel Nozzles |
|
AWS F3.2M/F3.2 |
Ventilation Guide for Weld Fume |
|
AWS PRG |
The Practical Reference Guide for Radiographic Inspection - Acceptance Criteria |
|
AWS B2.1-1/8-014 |
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel, (M-1 to M-8/P-8/S-8, Group 1), 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing Site License |
|
AWS B2.1-1/8-228 |
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, E309(L)-15, -16, or -17, As-Welded Condition, Primarily Pipe Applications Site License |
|
AWS B2.1-1-017 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010, As-Welded or PWHT Condition Site License |
|
AWS B2.1-1-019 |
Standard Welding Procedure Specification (WPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E70T-1 and E71T-1, As-Welded Condition Site License |
|
AWS B2.1-1-202 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications Site License |
|
AWS B2.1-1-232 |
Standard Welding Procedure Specification (SWPS) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuiting Transfer Mode) followed by Argon Plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, ER70S-3 and E7XT-X, As-Welded or PWHT Condition, Primarily Pipe Application |
|
AWS B5.4 |
Specification for the Qualification of Welder Test Facilities |
|
AWS C2.2 |
Recommended Practices for Metallizing with Aluminium and Zinc for Protection of Iron and Steel |
|
AWS C5.3 |
Recommended Practices for Air Carbon Arc Gouging and Cutting |
|
AWS D16.2M/D16.2 |
Guide for Components of Robotic and Automatic Arc Welding Installations |
|
AWS DPW |
Design and Planning Manual for Cost-Effective Welding |
|
AWS WIT-W-99 |
Welding Inspection Technology Wookbook-Third Edition |
|
AWS AWN |
Arc Welding and Cutting Noise |
|
AWS B2.1-1/8-230 |
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick, IN309 and ER309(L), As-Welded Condition, Primarily Pipe Applications Site License |
|
AWS C2.21M/C2.21 |
Specification for Thermal Spray Equipment Acceptance Inspection |
|
AWS F2.2 |
Lens Shade Selector |
|
AWS F3.1 |
Guide for Welding Fume Control |
|
AWS UEAW |
Handbook on the Ultrasonic Examination of Austenitic Welds |
|
AWS B2.1-1/8-006 |
Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8, P-8 or S-8), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License |
|
AWS B2.1-1/8-010 |
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1, P-1, S-1 to M-8, P-8, or S-8), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License |
|
AWS B2.1-1/8-231 |
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1,Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8,Group 1),1/8 through 1-1/2 inch Thick, IN309, ER309, and E309-15, -16, or -17,or IN309, ER309(L), and ER309(L)-15, -16, or -17, As-Welded Condition, Primarily Pipe |
|
AWS B2.1-1-205 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications Site License |
|
AWS B2.1-1-206 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications |
|
AWS B2.1-1-207 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2, As- Welded or PWHT Condition (Primarily Pipe Applications) Site License |
|
AWS B2.1-5A-225 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 3/4 in. Thick, PWHT Condition, IN521 and ER90S-B3, Primarily Pipe Applications Site License |
|
AWS B2.1-8-213 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, ER3XX-XX, As-Welded Condition (Primarily Pipe Applications) Site License |
|
AWS D14.7/D14.7M |
Recommended Practices for Surfacing and Reconditioning of Industrial Mill Rolls-1st Edition |
|
AWS EWH-1 |
Effects of Welding on Health I |
|
AWS PRGHF |
The Practical Reference Guide for Hardfacing |
|
AWS A9.2 |
Standard Guide for Recording Arc Weld Material Property and Nondestructive Examination Data in Computerized Databases |
|
AWS B2.1.002 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 Through 7/8 Inch, in the As-Welded Condition, with or without Backing Site License |
|
AWS B2.1-1-203 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill), As-Welded Condition (Primarily Pipe Applications) Site License |
|
AWS B2.1-1-204 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill Root with the Balance Vertical Uphill), As-Welded Condition, Primarily Pipe Applications Site License |
|
AWS B2.1-1-209 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition (Primarily Pipe Applications) Site License |
|
AWS B2.1-4-217 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), ER80S-B2, 1/8 Through 1/2 in. Thick As-Welded Condition, 1/8 Through 3/4 in. Thick, PWHT Condition, Primarily Pipe Applications Site License |
|
AWS B2.1-5A-222 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), ER90S-B3, 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 3/4 in. Thick, PWHT Condition, Primarily Pipe Applications Site License |
|
AWS B5.5 |
Specification for the Qualification of Welding Educators |
|
AWS C4.6M |
Thermal Cutting Classification of Thermal Cuts Geometric Product Specification and Quality Tolerances-(ISO 9013:2002 IDT) |
|
AWS F1.1M |
Method for Sampling Airborne Particulates Generated by Welding and Allied Processes |
|
AWS HOT |
Hands-On Training use of Measuring Tools for the AWS Certified Welding Inspector Hands-On Examination |
|
AWS PRGC |
The Practical Reference Guide for Corrosion of Welds - Causes and Cures |
|
AWS QC12 |
Specification for Qualification and Certification for Level III - Expert Welders |
|
AWS B2.1-1/8-229 |
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/ S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/ P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, ER309(L) and ER309(L)-15, -16, or -17, As-Welded Condition, Primarily Pipe Applications Site License-Incorporates Errata: 5/2006 |
|
AWS B2.1-1-012 |
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1,P-1, or S-1 to M-1, P-1 or S-1), 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing Site License |
|
AWS B2.1-1-026 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018, As-Welded or PWHT Condition Site License |
|
AWS B2.1-1-233 |
Standard Welding Procedure Specification (SWPS) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuiting Transfer Mode) followed by Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, ER70S-3, As-Welded or PWHT Condition, Primarily Pipe Applications |
|
AWS B2.1-8-005 ERTA |
Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Austenitic Stainless Steel (M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing |
|
AWS B2.1-8-013 |
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel, (SWPS) 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing Site License |
|
AWS B2.1-8-215 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Insert of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, IN3XX and ER3XX, As-Welded Condition, (Primarily Pipe Applications) |
|
AWS C5.1 |
Recommended Practices for Plasma-Arc Welding |
|
AWS D8.6 |
Specification for Automotive Resistance Spot Welding Electrodes |
|
AWS EWH-I |
Effects of Welding on Health, IndexI through XII |
|
AWS FACT SHEET NO. 19 |
Laser Welding and Cutting Safety |
|
AWS G1.6 |
Specification for the Qualification of Plastics Welding Inspectors for Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds |
|
AWS GWF |
Guide for the Design of a Welder Training Facility |
|
AWS SGSH |
The Independent Shop s Guide to Welding Safety and Health |
|
AWS VIW-IM |
Visual Inspection Workshop Instructors Manual |
|
AWS B2.1-1-022 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018, As-Welded or PWHT Condition Site License |
|
AWS B2.1-1-027 |
Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1/2 Inch Thick, E71T-11, As-Welded Condition Site License |
|
AWS B2.1-5A-224 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1-1/2 in. Thick, PWHT Condition, ER90S-B3 and E9018-B3, Primarily Pipe Applications Site License |
|
AWS B2.1-8-025 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, E3XX-XX, As-Welded Condition, Primarily Plate and Structural Applications |
|
AWS B2.1-8-214 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, ER3XX, E3XX-XX As-Welded Condition, Primarily Pipe Applications State License |
|
AWS D16.4M/D16.4 |
Specification for the Qualification of Robotic Arc Welding Personnel-2nd Editon |
|
AWS D8.1M |
Specification for Automotive Weld Quality— Resistance Spot Welding of Steel |
|
AWS D8.7M |
Recommended Practices for Automotive Weld Quality Resistance SpotWelding-Supersedes D8.7:1988 |
|
AWS F1.3M |
Sampling Strategy Guide for Evaluating Contaminants in the Welding Environment |
|
AWS F2.3M |
Specification for Use and Performance of Transparent Welding Curtains and Screens |
|
AWS QC17 |
STANDARD FOR ACCREDITATION OF WELDING FABRICATORS FOR AWS CERTIFIED WELDING FABRICATOR PROGRAM |
|
AWS A10.1M |
Specification for Calibration and Performance Testing of Secondary Current Sensing Coils and Weld Current Monitors used in Single-Phase AC Resistance Welding |
|
AWS B2.1-1-210 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications Site License |
|
AWS B2.1-1-211 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Insert Root Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S- 1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick INMs-1, ER70S-2, and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications |
|
AWS B2.1-4-221 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1-1/2 in. Thick, PWHT Condition IN515, ER80S-B2, and E8018-B2, Primarily Pipe Applications Site License |
|
AWS B2.1-8-023 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, As-Welded Condition Site License |
|
AWS B2.1-8-216 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Insert Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, IN3XX, ER3XXX, and E3XX-XX, As-Welded Condition Primarily Pipe Applications |
|
AWS B5.14 |
Specification for the Qualification of Welding Sales Representatives |
|
AWS C1.5 |
Specification for the Qualification of Resistance Welding Technician |
|
AWS D16.1M/D16.1 |
Specification for Robotic Arc Welding Safety |
|
AWS D8.14M/D8.14 |
Specification for Automotive and Light Truck Components Weld Quality - Aluminum Arc Welding |
|
AWS EWH-11 |
Effects of Welding on Health, XI |
|
AWS FGW |
Fumes and Gases In the Welding Environment |
|
AWS G1.1M/G1.1 |
Guide to Ultrasonic Assembly of Thermoplastics |
|
AWS G1.2M/G1.2 |
Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics |
|
AWS QC19 |
STANDARDS FOR THE AWS CERTIFICATION OF ROBOTIC ARC WELDING PERSONNEL |
|
AWS WZC |
Welding Zinc-Coated Steel-First Edition; Reprinted August 1983 |
|
AWS B2.1-1-234 |
Standard Welding Procedure Specification (SWPS) for Argon plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, E7XT-X, As-Welded or PWHT Condition, Primarily Pipe Applications |
|
AWS B2.1-4-218 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 Through 1/2 in. Thick As-Welded Condition, 1/8 Through 1-1/2 in. Thick, PWHT Condition, Primarily Pipe Applications Site License-Incorporates Errata 09/2005 |
|
AWS B2.1-4-219 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1-1/2 in. Thick, PWHT Condition, ER80S-B2 and E8018-B2, Primarily Pipe Applications Site License |
|
AWS B2.1-4-220 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 3/4 in. Thick, PWHT Condition IN515 and ER80S-B2, Primarily Pipe Applications Site License |
|
AWS B2.1-5A-223 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), ER9018-B3, 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1-1/2 in. Thick, PWHT Condition, Primarily Pipe Applications Site License-Incorporates Errata: 8/05 |
|
AWS B2.1-5A-226 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1-1/2 in. Thick, PWHT Condition, IN521, ER90S-B3, and E9018-B3, Primarily Pipe Applications Site License |
|
AWS FACT SHEET NO. 18 |
Lockout/Tagout |
|
AWS G1.10M |
Guide for The Evaluation of Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds |
|
AWS QC4 |
Standard for Accreditation of Test Facilities for AWS Certified Welder Program |
|
AWS C2.20/C2.20M |
Specificatiopn for Thermal Spraying Zinc Anodes on Steel Reinforced Concrete |
|
AWS FACT SHEET NO. 13 |
Ergonomics in the Welding Environment |
|
AWS FACT SHEET NO. 17 |
Electric and Magnetic Fields (EMF) |
|
AWS FACT SHEET NO. 3 |
Noise |
|
AWS FACT SHEET NO. 6 |
Fire and Explosion Prevention |
|
AWS SHF |
Safety and Health Fact Sheets-Third Edition |
|
AWS WHB-2.8 VOL 1 SPANISH |
Welding Handbook Volume 2 - Welding Processes - Spanish-Eighth Edition |
|
AWS WI CH 1 |
Application and Scope |
|
AWS D16.3M/D16.3 |
Risk Assessment Guide for Robotic Arc Welding |
|
AWS F1.4 |
Methods for Analysis of Airborne Particulates Generated by Welding and Allied Processes |
|
AWS FACT SHEET NO. 1 |
Fumes and Gases |
|
AWS FACT SHEET NO. 11 |
Confined Spaces |
|
AWS FACT SHEET NO. 14 |
Graphic Symbols for Precautionary Labels |
|
AWS FACT SHEET NO. 4 |
Chromium and Nickel in Welding Fume |
|
AWS SP |
Safe Practices-Reprint of WHB-1 CH 16 |
|
AWS ULR |
ULTRAVIOLET REFLECTANCE OF PAINT |
|
AWS CAWF |
Characterization of Arc Welding Fume |
|
AWS EWH-12 |
Effects of Welding on Health, XII |
|
AWS EWH-2 |
Effects of Welding on Health II |
|
AWS F1.5M |
Methods for Sampling and Analyzing Gases from Welding and Allied Processes |
|
AWS F2.1 |
Recommended Safe Practice for Electron Beam Welding and Cutting |
|
AWS FACT SHEET NO. 12 |
Contact Lens Wear |
|
AWS FACT SHEET NO. 15 |
Style Guidelines for Safety and Health Documents |
|
AWS FGW PT 5 |
Fumes and Gases from Oxygen Cutting |
|
AWS TSS |
Thermal Spraying - Practice, Theory, and Application |
|
AWS EWH-10 |
Effects of Welding on Health X |
|
AWS EWH-13 |
Effects of Welding on Health, XIII |
|
AWS EWH-3 |
Effects of Welding on Health III |
|
AWS EWH-4 |
Effects of Welding on Health IV |
|
AWS EWH-5 |
Effects of Welding on Health V |
|
AWS EWH-6 |
Effects of Welding on Health VI |
|
AWS EWH-7 |
Effects of Welding on Health VII |
|
AWS EWH-8 |
Effects of Welding on Health VIII |
|
AWS EWH-9 |
Effects of Welding on Health IX |
|
AWS FACT SHEET NO. 10 |
Falling Objects |
|
AWS FACT SHEET NO. 16 |
Pacemakers and Welding |
|
AWS FACT SHEET NO. 20 |
Thermal Spraying Safety |
|
AWS FACT SHEET NO. 5 |
Electrical Hazards |
|
AWS FACT SHEET NO. 7 |
Burn Protection |
|
AWS FACT SHEET NO. 8 |
Mechanical Hazards |
|
AWS FACT SHEET NO. 9 |
Tripping and Falling |
|
AWS FGW APP C |
Tables C1 to C4 (Summary of Original Data, Part III) |
|
AWS FGW APP D |
Tables D1 and D2 (Laboratory Data Sheets for Part IV) |
|
AWS FGW PT 2 |
Arc Welding Fumes and Gases |
|
AWS FGW PT 4 |
Thermal Spraying Fumes and Gases |
|
AWS LVOS |
Laboratory Validation of Ozone Sampling with Spill-Proof Impingers |
|
AWS WFDP |
Welding Fume Control, a Demonstration Project 1982 |
|
AWS F1.6 |
Guide for Estimating Welding Emissions for EPA and Ventilation Permit Reporting |
|
AWS FGW APP B |
Tables B1 to B43 (Tubular Data on Fume Generation Characteristics of Electrodes Used in Part II) |
|
AWS FGW APP E |
Tables E1 to E6 (Laboratory Data Sheets for Part V) |
|
AWS FGW PT 3 |
Brazing Fumes and Gases |
|
AWS WHB-2.8 VOL 3 SPANISH |
Welding Handbook Volume 2 - Welding Processes - Spanish-Eighth Edition |
|
AWS WHB-2.8 VOL 2 SPANISH |
Welding Handbook Volume 2 - Welding Processes - Spanish-Eighth Edition |
|
AWS A2.1 WC & DC |
Welding Symbols Wall and Desk Charts (Laminated) |