BSI BS EN 61508-1

Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems - Part 1: General Requirements-CORR 10631: August 1999; AMD 13779; March 15, 2002; Renumbers BS IEC 61508-1: 1999

BSI BS EN 60950-1

Information technology equipment Safety Part 1: General requirements-CORR 16481: June, 2006: CORR 16565: August, 2006

BSI BS EN 55022

Information technology equipment Radio disturbance characteristics Limits and methods of measurement-CORR 16829: November 30, 2006

BSI BS EN 61508-2

Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems - Part 2: Requirements for Electrical/Electronic/Programmable Electronic Safety-Related Systems-AMD 13780:March 15, 2002; Renumbers BS IEC 61508-2:2000;

BSI BS EN 61000-4-2

Electromagnetic Compatibility (EMC) - Part 4.2: Testing and Measurement Techniques - Electrostatic Discharge Immunity Test-AMD 13187: September 28, 2001; IEC 61000-4-2: 1995;

BSI BS EN 60950

Safety of Information Technology Equipment-CORR 13834: July 8, 2002

BSI BS EN 61000-3-2

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current greater than or equal to 16 A per phase)

BSI BS EN 61000-4-4

Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques Electrical fast transient/burst immunity test-AMD 16840: January 31, 2007

BSI BS EN 61000-6-2

Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments

BSI BS 3G 100-2.3.12

General Requirements for Equipment for Use on Aircraft Part 2: All Equipment Section 3: Environmental Conditions Subsection 3.12: Fluid Contamination

BSI BS 2S 143

Chromium-Nickel-Copper-Molybdenum Corrosion- Resisting Steel (Precipitation Hardening) Billets, Bars, Forgings and Parts (930-1080 MPa)-AMD 13268: November 30, 2001; Supersedes BS S 143

BSI BS ISO/IEC 90003

Software engineering Guidelines for the application of ISO 9001:2000 to computer software-Supersedes BS EN ISO 9000-3:1997

BSI BS 3G. 100-2.2

General requirements for equipment in aircraft Part 2: All equipment Section 2: Magnetic influence-AMD 2791: May 1979;

BSI BS EN 61000-4-3

Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques Radiated, radio-frequency, electromagnetic field immunity test

BSI BS EN 9100

Quality management systems Requirements (based on ISO 9001:2000) and Quality systems Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994)

BSI BS ISO/IEC 12207

Information technology Software life cycle processes

BSI 4A 100

Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1 249 MPa

BSI BS ISO/IEC 27001

Information technology Security techniques Information security management systems Requirements-Supersedes BS 7799-2: 2002

BSI BS 3032

1958 Higher Tensile Steel Shackles-AMD 5045: October 1963;

BSI BS ISO/IEC 17799

Information technology Security techniques Code of practice for information security management-Also Known as BS 7799-1: 2005

BSI BS EN 61000-6-4

Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

BSI L 168

Bars and Extruded Sections of Aluminium- Copper-Magnesium- Silicon-Manganese Alloy (Solution Treated and Artificially Aged) (Not Exceeding 200 mm Diameter or Minor Sectional Dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (AMD 7876) 8-15-93 (S)-Amd 1;

BSI BS EN 10277-2

Bright steel products Technical delivery conditions Part 2: Steels for general engineering purposes-CORR 1638: September 29, 2006; Together with BS EN 10278 and BS EN 10277 Parts 1,3,4 and 5 Supersedes BS 970-3:1991

BSI BS IEC 61000-5-2

Electromagnetic Compatibility (EMC) - Part 5: Installation and Mitigation Guidelines Section 2: Earthing and Cabling

BSI 4L 100

Procedure for Inspection, Testing and Acceptance of Wrought Aluminium and Aluminium Alloys (AMD 8717) November 15, 1995 (S)-Amd 2;

BSI BS EN 61340-5-1

Electrostatics - Part 5-1: Protection of Electronic Devices from Electrostatic Phenomena - General Requirements-CORR 12093: November 2000; AMD 13198: November 8, 2001; CORR 14392; June 20, 2003; CORR 16300: June 2006; Renumbers BS IEC 61340-5-1: 1998; Supersedes BS EN 100015-1: 1992, BS EN 100015-2: 1994, BS EN 100015-3: 1994 and BS EN 100015-4: 1994

BSI BS 3S 144

Chromium-Nickel-Copper- Molybdenum Corrosion Resisting Steel (Precipitation Hardening) Billets, Bars, Forgings and Parts (1130 MPa to 1330 MPa)-AMD 8996; July 1996; Revision of BS 2S 144: 1976

BSI BS EN 61000-4-5

Electromagnetic Compatibility (EMC) - Part 4-5: Testing and Measurement Techniques - Surge Immunity Test-IEC 61000-4-5: 2005;

BSI BS 4F 68

Controlled storage of vulcanized rubbers for use in aerospace applications-Supersedes BS 3F 68: 1977;

BSI BS EN 55011

Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

BSI BS EN 61000-3-3

Electromagnetic compatibility (EMC) Part 3: Limits Section 3: Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current less than or equal to 16 A per phase and not subject to conditional connection-AMD 9789: January 1998; AMD 13568: April 02, 2002; AMD 16215: August 31, 2006; IEC 61000-3-3: 1994;

BSI BS EN 61000-6-1

Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments

BSI BS EN 2859

Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series Classification: 1 100 MPa (at ambient temperature)/235°C

BSI BS EN 60073

Basic and Safety Principles for Man-Machine Interface, Marking and Identification - Coding Principles for Indicators and Actuators

BSI BS EN 61000-6-3

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

BSI BS EN 61000-4-1

Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series

BSI BS L 165

Specification for Sheet and Strip of Aluminium-Coated Aluminium-Copper-Magnesium-Silicon-Manganese Alloy (Solution Treated and Artificially Aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)-AMD 13572: April 5, 2002;

BSI 2X 34

Two Component Polyurethane Finish for Aerospace Purposes-Supersedes X 34: 1991;

BSI BS EN 61000-4-11

Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests

BSI A 260-A 265

Specification for Metric Screws-Amd 2;

BSI BS 5S 99

2.5 Percent Nickel- Chromium-Molybdenum (High Carbon)Steel Billets, Bars, Forgings and Parts (1230-1420 MPa: Limiting Ruling Section 150 mm)-Supersedes 4S 99: 1976

BSI BS S 154

2 1/2 Per Cent Nickel- Chromium- Molybdenum Steel Billets, Bars, Forging and Parts (880- 1080 MPa: Limiting Ruling Section 150 mm)-AMD 5676: October 31, 1988; Replaces BS 2S 96: 1964

BSI BS EN 61800-3

Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods

BSI BS 2X 33

Specification for two component primer for aerospace purposes-AMD 15983: November 28, 2005

BSI BS ISO/IEC 15288

Systems engineering System life cycle processes

BSI BS 3A 125-132

3A 136-143, 3A 147-168, 3A 180-181, 3A 186-187, 3A 192-193, 3A 200-201, 2A 213-216 Stiffnuts (Unified Threads) for Aircraft-Replaces BS 2A 125 to 2A 132; 2A 136 to 2A 143; 2A 147 to 2A 168; 2A 180; 2A 181; 2A 192; 2A 193; 2A 186; 2A 187; 2A 200; 2A 201; A 213 to A 216: 1958

BSI BS 7531

Rubber bonded fibre jointing for industrial and aerospace purposes - Specification

BSI DD ISO/TS 24817

Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection

BSI BS EN 55014-1

Electromagnetic compatibility Requirements for household appliances, electric tools and similar apparatus Part 1: Emission

BSI BS L 164

Sheet and Strip of Aluminium-Coated Aluminium- Copper- Magnesium-Silicon- Manganese Alloy (Solution Treated and Aged at Room Temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)-AMD 10928: September 2000;

BSI BS EN 61131-3

Programmable controllers Part 3: Programming languages

BSI 3G 100-3

General Requirements for Equipment for Use in Aircraft Part 3: Characteristics of Aircraft Electrical Power Supplies-AMD 4425: December 1983;

BSI BS EN 10084

Case Hardening Steels - Technical Delivery Conditions-AMD 10308; October 15, 1998; CORR 15801: March 2006; Together with BS EN 10083-1:1991, BS EN 10087:1999, BS EN 10098-1:1995, BS EN 10088-2:1995 and BS EN 10088-3:1995 supersedes BS 970-1:1996

BSI BS EN 9102

Quality systems First article inspection

BSI 2SP 68-71

100 Degree Countersunk Precision Head Aluminium and Aluminium Alloy Rivets for Aircraft-Amd 2;

BSI BS EN 55024

Information Technology Equipment - Immunity Characteristics - Limits and Methods of Measurement-AMD 14388: June 9, 2003; CISPR 24: 1997;

BSI BS EN 61000-2-4

Electromagnetic compatibility (EMC) Part 2-4: Environment Compatibility levels in industrial plants for low-frequency conducted disturbances

BSI BS EN 61131-2

Programmable controllers Part 2: Equipment requirements and tests-AMD 15180:June 24, 2004

BSI 2A 204

2A 206, 2A 208, A 217- 225 Machine Screws and Nuts (Unified Threads) Below 1/4 in for Aeronautical Purposes-Amd 2;

BSI BS EN 60146-1-1

Semiconductor Convertors General Requirements and Line Commutated Convertors Part 1-1: Specifications of Basic Requirements-AMD 10063; September 15, 1998; Together with BS EN 60146-1-3, Supersedes BS 4417: 1969; Partially Superseded by BS EN 50328:2003; IEC 60146-1-1: 1991;

BSI BS EN 62040-3

Uninterruptible power systems (UPS) Part 3: Method of specifying the performance and test requirements-CORR 14671: November 10, 2003; Supersedes DD ENV 50091-3:1999;

BSI BS EN 61000-2-2

Electromagnetic Compatibility (EMC) Part 2-2: Environment Compatibility Levels for Low-Frequency Conducted Disturbances and Signalling in Public Low-Voltage Power Supply Systems-Supersedes DD ENV 61000-2-2: 1993;

BSI BS 2A 241

General requirements for steel protrudinghead bolts of tensile strength 1250 MPa (180 000 lbf/in2) or greater Specification-Supersedes BS A 241:1973

BSI BS 3S 145

Chromium-Nickel-Copper-Molybdenum Corrosion Resisting Steel (Precipitation Hardening) Billets, Bars, Forgings and Parts (1270 MPa to 1470 MPa)-AMD 9768; February 15, 1998; Supersedes BS 2S 145: 1976

BSI BS EN 61131-1

Programmable controllers Part 1: General information

BSI BS EN 61000-4-8

Electromagnetic Compatibility (EMC) - Part 4-8: Testing and Measurement Techniques - Power Frequency Magnetic Field Immunity Test-AMD 13188: October 10,2001; IEC 61000-4-8: 1993;

BSI 4T 100

Procedure for Inspection, Testing and Acceptance of Seamless Steel Tubes and Tubestock

BSI BS EN 14399-1

High-strength structural bolting assemblies for preloading Part 1: General requirements

BSI 2L 93

Plate of Aluminium- Copper-Magnesium-Silicon -Manganese Alloy (Solution Treated, Controlled Stretched and Precipitation Treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.85) (AMD 6841) November 29, 1991-Amd 1;

BSI 3A 103

Steel Nuts (Unified Hexagons and Unified Threads) (Ordinary, Thin, Slotted and Castle) for Aircraft-Amd 3;

BSI BS 2M 54

Temperature Control in the Heat Treatment of Metals

BSI BS EN 3332

Aluminium alloy AL-P7475-T762 Clad sheet and strip 1,0 mm less than or equal to a less than or equal to 6 mm

BSI BS EN 4179

Qualification and Approval of Personnel for Non-Destructive Testing

BSI BS S 162

Specification for 18 % nickel-cobaltmolybdenum maraging steel for forging stock, forgings, bars and parts (1800 MPa: double vacuum melted)-AMD 6373: July, 1991; AMD 16005: October, 2005

BSI BS 7799-3

Information security management systems - Part 3: Guidelines for information security risk management

BSI BS EN 55015

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

BSI BS 2S 147

0.5 Per Cent Nickel- Chromium-Molybdenum Steel Bars for the Manufacture of Forged Bolts and Forged Nuts-AMD 6836: November 29, 1991; Replaces BS S 147: 1969

BSI BS 4A 104

Specification for Corrosion-Resisting Steel Bolts (Unified Hexagons and Unified Threads) for Aircraft-AMD 16375: June 2006

BSI BS 2S 130

18/9 Chromium-Nickel Corrosion-Resisting Steel (Niobium Stabilized) Billets, Bars, Forgings and Parts (540 MPa; Limiting Ruling Section 150 mm)-Amd 1; Replaces BS S 130: 1964

BSI BS EN 2654

Screws, 100 Degree Countersunk Normal Head, Slotted, Threaded to Head, in Brass, Tin Plated - Classification: 380 MPa (at Ambient Temperature)/80 Degrees C

BSI BS EN 3333

Aluminium alloy AL-P7475-T762 Sheet and strip 0,6 mm less than or equal to a less than or equal to 6 mm

BSI 2L 99

Ingots and Castings of Aluminium-Silicon- Magnesium Alloy (Solution Treated and Precipitation Treated) (Si 7, Mg 0.3) (AMD 6543) March 28, 1991-Amd 2;

BSI BS EN 1915-1

Aircraft Ground Support Equipment - General Requirements - Part 1: Basic Safety Requirements

BSI BS IEC 61000-3-4

Electromagnetic Compatibility (EMC) - Part 3-4: Limits - Limitation of Emission of Harmonic Currents in Low-Voltage Power Supply Systems for Equipment with Rated Current Greater Than 16 A

BSI BS L 163

Specification for Sheet and Strip of Aluminium-Coated Aluminium-Copper-Magnesium-Silicon-Manganese Alloy - (Solution Treated, Cold Worked for Flattening and Aged at Room Temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)-AMD 13569: April 5, 2002;

BSI T 72-73

18/10 Chromium-Nickel Corrosion-Resisting Steel Tube for Hydraulic Purposes (Niobium/ Titanium Stabilized: 550 MPa) (AMD 6852) December 24, 1991-Amd 1;

BSI BS EN 2138

Washers, Flat, in Steel, Cadmium Plated

BSI 2TA 11

Bar and Section for Machining of Titanium- Aluminium-Vanadium Alloy (Tensile Strength 900 1160 MPa) (Limiting Ruling Section 150 mm)

BSI BS L 166

Specification for Close Toleranced Sheet and Strip of Aluminium-Coated Aluminium-Copper-Magnesium-Silicon-Manganese Alloy (Solution Treated and Aged at Room Temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)-AMD 13571: April 5, 2002;

BSI L 113

Sheet and Strip of Aluminium-Magnesium- Silicon-Manganese Alloy (Solution Treated and Precipitation Treated)

BSI BS ISO/IEC 9126-1

Information Technology - Software Product Quality - Part 1: Quality Model

BSI BS 6259

Code of Practice for the Design, Planning, Installation, Testing and Maintenance of Sound Systems

BSI BS SP 90

Corrosion-Resisting Steel Split Cotter Pins for Aircraft-Amd 3;

BSI BS 2G 100-2

Specification for General requirements for electrical equipment and indicating instruments for aircraft Part 2: Environmental and Operating Conditions-AMD 4797: February 1963: AMD 5071: November 1963; AMD 5543: June 1965; AMD 6389: April 1968; AMD 390: December 1969

BSI BS 6701

Telecommunications equipment and telecommunications cabling Specification for installation, operation and maintenance

BSI BS 6SP 4

Pins Headed, Plain Shank, Drilled, Steel Alloy and Corrosion Resisting Steel with a Strength Class 880/ 1 080 MPa-CORR 11017: August 2000; AMD 16018: January 13, 2006; Supersedes BS 5SP 4:1944

BSI BS EN 60146-1-3

Semiconductor Convertors General Requirements and Line Commutated Convertors Part 1-3: Transformers and Reactors (IEC 146-1-3: 1991) (S)

BSI BS ISO/IEC 15434

Information technology Automatic identification and data capture techniques Syntax for high-capacity ADC media

BSI 2S 98

2 1/2 Per Cent Nickel- Chromium Molybdenum Steel (75/85 Tonf/Sq in: Limiting Ruling Section 6 in) (AMD 5680) July 29, 1988-Amd 2;

BSI BS 6656

Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation Guide

BSI BS EN 2002-1

Metallic materials Test methods Part 1: Tensile testing at ambient temperature

BSI BS EN 61000-4-7

Electromagnetic compatibility (EMC) Part 4-7: Testing and measurement techniques General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto-CORR 15316: August 18, 2004; CORR 15665: May 9, 2005

BSI BS 2L 169

Ingots (as Cast) and Castings (Solution Treated and Artificially Aged) of Aluminium-Silicon-Magnesium Alloy (Si 7, Mg 0.6)-Supersedes BS L 169:1986;

BSI BS EN 2326

Aluminium Alloy AL-P6082-T6 Extruded Bars and Sections a or D Less Than or Equal to 200 mm

BSI BS 2S 135

1% carbon-chromium steel billets, bars, forgings and parts (Limiting ruling section 25 mm)-AMD 14141; May 30, 2003;

BSI BS EN 60825-2

Safety of laser products Part 2: Safety of optical fibre communication systems (OFCS)-AMD 17036: March 30, 2007

BSI BS EN 50174-3

Information technology Cabling installation Part 3: Installation planning and practices outside buildings

BSI A 281-A 286

Hexagon (Thin) Self- Locking Nuts with Non- Metallic Locking Inserts. Metric Series

BSI BS EN 60947-5-5

Low-Voltage Switchgear and Controlgear Part 5-5: Control Circuit Devices and Switching Elements - Electrical Emergency Stop Devices with Mechanical Latching Function-AMD 15592: October 31, 2006

BSI BS EN 60950-21

Information technology equipment Safety Part 21: Remote power feeding

BSI BS EN 61131-5

Programmable Controllers - Part 5: Communications-IEC 61131-5: 2000;

BSI BS EN ISO 9241-1

Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 1: General Introduction-AMD 13617: July 24, 2002; Supersedes BS EN 29241-1: 1993;

BSI BS IEC 61000-2-7

Electromagnetic Compatibility (EMC) - Part 2: Environment - Section 7: Low Frequency Magnetic Fields in Various Environments

BSI BS EN 2122

Washers, Flat, in Aluminium Alloy, Anodized or Chromated (S)

BSI BS EN 55020

Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement

BSI BS EN 61000-3-12

Electromagnetic compatibility (EMC) Part 3-12: Limits Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current greater than 16 A and equal to or less than 75 A per phase

BSI BS EN ISO 9241-5

Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 5: Workstation Layout and Postural Requirements-Supersedes BS 7179-5: 1990;

BSI BS EN 2089

Aluminium alloy AL-P2014A-T6 or T62 Sheet and strip 0,4 mm less than or equal to a less than or equal to 6 mm

BSI BS EN 4449

Aluminium alloy AL-P7050 T76 Sheet 0,8 mm less than or equal to a less than or equal to 6 mm

BSI 2S 510

carbon steel sheet and strip (430/540 MPa) (suitable for welding)-AMD 14158: May 30, 2003; Supersedes BS S 510: 1956;

BSI A 287-292

Hexagon Socket Head Cap Screws. Metric Series

BSI BS EN 60669-1

Switches for household and similar fixed-electrical installations Part 1: General requirements-AMD 12098: March 2001; AMD 14684:October 10, 2003; CORR 16997: March 30, 2007

BSI BS 3G 230

Specification for General Requirements for Aircraft Electrical Cables (Second Series)-CORR 13474: December 21, 2001;

BSI BS EN 61643-11

Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and tests-AMD 17012: May 31, 2007

BSI L 111

Bars and Extruded Sections of Aluminium- Magnesium-Manganese Alloy (Solution Treated and Precipitation Treated)

BSI S 534

Specification for chromium-molybdenum steel sheet and strip (880/1 080 MPa) (suitable for welding)-AMD 14146: May 27, 2003; Superseding BS S 518;

BSI BS 3S 132

3 % chromiummolybdenum- vanadium steel billets, bars, forgings and parts (1 320-1 470 MPa: limiting ruling section 70 mm) (suitable for nitriding)-AMD 14160; May 30, 2003; Supersedes BS 2S 132

BSI BS EN 60146-2

Semiconductors convertors - Part 2: Self-commutated semiconductor converters including direct d.c. converters-CORR 11067: September 2000; IEC 60146-2: 1999;

BSI BS EN 61131-7

Programmable Controllers - Part 7: Fuzzy Control Programming-IEC 61131-7:2000;

BSI BS ISO 13374-1

Condition monitoring and diagnostics of machines Data processing, communication and presentation Part 1: General guidelines

BSI BS S 527

Specification for softened 18/10 chromium-nickel corrosion-resisting steel sheet and strip (niobium stabilized: 540 MPa)-AMD 14150: May 27, 2003;

BSI BS EN 60945

Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results

BSI DD IEC TS 62239

Process management for avionics Preparation of an electronic components management plan-Supersedes PD IEC/PAS 62239:2001;

BSI 3F 69

Packaging and Identification of Vulcanized Rubber Items-AMD 9771; February 15, 1998; Supersedes BS 2F 69;

BSI HR 650

High Expansion Heat- Resisting Steel Bar and Wire for the Manufacture of Bolts, Studs, Set Screws and Nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (Limiting Ruling Section 20 mm)-Amd 2;

BSI BS EN 2139

Washers, Flat Heat Resisting Steel

BSI BS EN 61158-2

Digital data communications for measurement and control Fieldbus for use in industrial control systems Part 2: Physical layer specification and service definition-Together with BS EN 61158-3:1994, BS EN 61158-4:2004, BS EN 61158-5:2004, BS EN 61158-6:2004 and BS EN 61784-1:2004, supersedes BS EN 50170:1997 and BS EN 50254:1999

BSI S 535

Specification for chromium-molybdenum steel sheet and strip (1 150/1 300 MPa) (suitable for welding)-AMD 14145:May 27, 2003; Superseding BS S 519;

BSI BS 4A 102

Specification for steel bolts (Unified hexagons and Unified threads) for aircraft-AMD 1: June, 2006;: 1962

BSI BS EN 55014-2

Electromagnetic Compatibility Requirements for Household Appliances, Electric Tools and Similar Apparatus Part 2: Immunity Product Family Standard-AMD 13662: September 18, 2002; AMD 9962: April 1998; Supersedes BS EN 55104:1995; CISPR 14-2: 1997

BSI PD IEC TR 61131-8

Programmable controllers Part 8: Guidelines for the application and implementation of programming languages

BSI BS 2A 25

Specification for Steel hexagonal-headed bolts (B.A. and B.S.F. threads) for aircraft-AMD 4726:November 1962; AMD 5298:August 1962; AMD 2106:October 1976; AMD 5751:November 1987; AMD 6082:November 1990

BSI BS EN 61000-4-12

Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test

BSI BS EN ISO 15225

Nomenclature Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange-AMD 15036: March 31, 2004; AMD 15844: November 9, 2005

BSI 2S 511

Deep drawing carbon steel sheet and strip (280/400 MPa) (suitable for welding)-AMD 14157: May 30, 2003; Supersedes BS S 511: 1956;

BSI 4A 4

Test Pieces and Test Methods for Metallic Materials for Aircraft (AMD 7919) November 15, 1993 (S)-Amd 3;

BSI BS 8418

Installation and remote monitoring of detector activated CCTV systems  Code of practice-AMD 15833: August 3, 2005; Supersedes PAS 38: 2000

BSI TA 56

Plate of Titanium- Aluminium-Vanadium Alloy (Tensile Strength 895-1150 MPa) (Maximum Thickness 100 mm)-Amd 1;

BSI BS 3998

Recommendations for Tree Work (AMD 6549) December 21, 1990-Amd 1;

BSI BS EN 60215

Safety Requirements for Radio Transmitting Equipment-AMD 9197: June 15, 1996; Renumbers BS 3192:1990; Also Known as BS 3192:1996

BSI PD IEC TR 61850-1

Communication networks and systems in substations Part 1: Introduction and overview

BSI BS EN 60794-1-1

Optical fibre cables Part 1-1: Generic specification General-CORR 15445: November 29, 2004

BSI BS 3S 500

Procedure for Inspection, Testing and Acceptance of Steel Sheet and Strip-AMD 9327; February 15, 1997

BSI BS EN 13914-1

Design, preparation and application of external rendering and internal plastering Part 1: External rendering-AMD 13914: August 2006;: 1991

BSI BS EN 50174-1

Information Technology - Cabling Installation - Part 1: Specification and Quality Assurance-Supersedes BS 7718;

BSI BS EN 55013

Sound and television broadcast receivers and associated equipment Radio disturbance characteristics Limits and methods of measurement-CORR 13656: Janu146 15, 2002; AMD 14680: September 30, 2003; AMD 16532: September 29, 2006

BSI BS EN 61000-4-16

Electromagnetic compatibility (EMC) Part 4-16: Testing and measurement techniques Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz-CORR 10059:May 1998; AMD 15273:July 2004; IEC 61000-4-16: 1998;

BSI BS EN 1387

Machine Readable Cards - Health Care Applications - Cards: General Characteristics

BSI BS IEC 61000-3-8

Electromagnetic Compatibility (EMC) - Part 3-8: Limits - Guide to Signalling on Low-Voltage Electrical Installations - Emission Levels, Frequency Bands and Electromagnetic Disturbance Levels-AMD 10238; February 2000;

BSI BS ISO/IEC 16085

Systems and software engineering - Life cycle processes - Risk management

BSI 2S 513

Specification for spring steel strip-AMD 14156: May 30, 2003; Superceding BS S 513;

BSI BS EN 14399-5

High-strength structural bolting assemblies for preloading Part 5: Plain washers-CORR 16228: August 2006; Together with BS EN 14399-1:2005, BS EN 14399-2:2005, BS EN 14399-3:2005, BS EN 14399-4:2005 and BS EN 14399-6:2005:1969

BSI BS EN 50173-1

Information technology - Generic cabling systems - Part 1: General requirements and office areas-CORR 14357: April 11, 2003; AMD 17194: June 29, 2007

BSI BS EN 50174-2

Information Technology - Cabling Installation - Part 2: Installation Planning and Practices Inside Buildings-Supersedes BS 7718;

BSI 2TA 100

Procedure for Inspection and Testing of Wrought Titanium and Titanium Alloys-AMD 10739; June 2000 ; Supersedes BSI TA 100;

BSI 5M 23

Specification for an Identification Scheme for Pipelines (AMD 6071) July 31, 1989-Amd 1;

BSI BS ISO/IEC 15504-1

Information technology Process assessment Part 1: Concepts and vocabulary-Supersedes BS ISO/IEC TR 15504-1:1998 and BS ISO/IEC TR 15504-9:1998

BSI S 524

Specification for cold-rolled 18/10 chromium-nickel corrosion-resisting steel sheet and strip (titanium stabilized: 800 MPa)-AMD 14153: May 27, 2003; Superseding in Part BS S 520;

BSI BS EN 14399-6

High-strength structural bolting assemblies for preloading Part 6: Plain chamfered washers-CORR 1629: August 2006; Together with BS EN 14399-1:2005, BS EN 14399-2:2005, BS EN 14399-3:2005, BS EN 14399-4:2005 and BS EN 14399-5:2005 Supersedes BS 4395-1:1969 and BS 4395-2:1969

BSI BS EN 50310

Application of Equipotential Bonding and Earthing Buildings with Information Technology Equipment

BSI BS IEC 61000-6-6

Electromagnetic compatibility (EMC) Part 6-6: Generic standards HEMP immunity for indoor equipment

BSI BS SP 114

Specification for Eye bolts (unified threads) for aircraft-AMD 4081: February 1961; AMD 1800: August 1975; AMD 3350: July 1980

BSI PD ISO/IEC TR 9126-2

Software engineering Product quality Part 2: External metrics

BSI 2HC 101

Precipitation Hardening Chromium-Nickel-Copper- Molybdenum Steel Castings (950 MPa) (Cr 14.0, Ni 4.5, Cu 2.5, Mo 1.5) (AMD 6704) April 30, 1991-Amd 2;

BSI 2S 92

Carbon-Manganese Steel (Suitable for Welding)

BSI 3G 210

PTFE Insulated Equipment Wires and Cables, Single- and Multi-Core, with Silver Plated Copper Conductors (190 Degrees C) or Nickel Plated Copper Conductors (260 Degrees C) (S)

BSI B 23

Copper-Aluminium- Nickel-Iron Alloy Rods, Sections, Forging Stock and Forgings

BSI BS 6464

Reinforced Plastics Pipes, Fittings and Joints for Process Plants-Amd 1;

BSI BS A 346

UNJ Threads - General Requirements and Limit Dimensions-Supersedes BS 4084: 1996; ISO 3161: 1999;

BSI BS EN 1915-2

Aircraft Ground Support Equipment - General Requirements - Part 2: Stability and Strength Requirements, Calculations and Test Methods

BSI BS EN 2437

Chromate Conversion Coatings (Yellow) for Aluminium and Aluminium Alloys

BSI PD IEC TR 62380

Reliability data handbook Universal model for reliability prediction of electronics components, PCBs and equipment

BSI 2SP 157-163

Solid Rivets with Universal Head Made from L 86 (SP 157 and SP 163), L 58 (SP 160 and SP 161), L 37 (SP 162) and DTD 204 (SP 158 and SP 159) Materials-Amd 2;

BSI 4A 228

Steel Double Hexagon Bolts - 1250 MPa (180,000 lbf/in2) for Aircraft-Supersedes 3A 288: 1979;

BSI BS 6657

Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation Guide-CORR 14499: June 30, 2003;

BSI PD ISO/IEC TR 9126-3

Software engineering Product quality Part 3: Internal metrics

BSI BS 7818

Specification for pedestrian restraint systems in metal-CORR 15047: May 10, 2004; CORR 16540: September 29, 2006; Supersedes BS 3049:1976

BSI BS EN 14399-2

High-strength structural bolting assemblies for preloading Part 2: Suitability test for preloading

BSI BS 5N 100-7

Aircraft Oxygen Systems and Equipment - Part 7: Guide to Cleaning Labelling and Packaging-Supersedes BS 4N 100-7: 1999;

BSI BS EN 62040-1-2

Uninterruptible power systems (UPS) Part 1-2: General and safety requirements for UPS used in restricted access locations-CORR 15043: March 26, 2004

BSI BS ISO/IEC 16022

Information technology Automatic identification and data capture techniques Data Matrix bar code symbology specification

BSI 2SP 95

Elastomeric Grommets (Polychloroprene) for Aerospace Use (AMD 3515) February 27, 1981-Amd 1;

BSI BS 2SP 1

Shackles-Amd 4;

BSI BS 3573

Polyolefin Copper- Conductor Telecommunication Cables

BSI 4G 198 PART 1

Sleeves and Moulded Components for Aircraft Electric Cables and Equipment Wires Part 1: Specification for Elastomeric Sleeves for Binding and Identification-(S); Supersedes 3G 198: Part 1: 1989

BSI BS EN 2367

Split Pins in Steel EN 2573

BSI L 115

Plate of Aluminium- Magnesium-Silicon- Manganese Alloy (Solution Treated, Controlled Stretched and Precipitation Treated) (Not Exceeding 25 mm Thickness) (Suitable for Welding) (Mg 0.8, Si 1, Mn 0.7) (AMD 6844) Nov. 29, 1991-Amd 1;

BSI 2TA 10

Sheet of Titanium- Aluminium-Vanadium Alloy (Tensile Strength 960-1270 MPa)-Amd 2;

BSI BS EN 2874

Bolts, Large Bihexagonal Head, Close Tolerance Normal Shank, Medium Length Thread, in Heat Resisting Nickel Base Alloy, Passivated - Classification: 1550 MPa (at Ambient Temperature) /315 Degrees C

BSI BS EN 61000-4-10

Electromagnetic Compatibility (EMC) - Part 4-10: Testing and Measurement Techniques - Damped Oscillatory Magnetic Field Immunity Test-AMD 13192: October 5,2001; IEC 61000-4-10:1993;

BSI BS EN 61000-4-13

Electromagnetic Compatibility (EMC) - Part 4-13: Testing and Measurement Techniques - Harmonics and Interharmonics Including Mains Signalling at a.c. Power Port, Low Frequency Immunity Tests-IEC 61000-4-13: 2002;

BSI BS EN ISO 9241-6

Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 6: Guidance on the Work Environment-Supersedes BS 7179-6: 1990;

BSI 4T 45

Carbon-Manganese Steel Tube (700 N/Square mm) (Tube 12.5 mm Outside Diameter and Greater) (Weldable)

BSI BS EN ISO 13407

Human-Centred Design Processes for Interactive Systems

BSI BS EN ISO 14620-1

Space systems Safety requirements Part 1: System safety

BSI L 102

Bars and Extruded Sections of Aluminium- Copper-Magnesium- Silicon-Manganese Alloy (Solution Treated and Aged at Room Temperature) (Not Exceeding 200 mm Diameter or Minor Sectional Dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)

BSI 2SP 77-80

Snap Head Aluminium and Aluminium Alloy Rivets for Aircraft

BSI BS EN 3643

Rivets, Solid, 100 Degree Countersunk Normal Head, in Titanium TI-PO2, Anodized, Inch Based Series

BSI BS EN 9200

Programme management Guidelines for project management specification

BSI BS EN ISO/IEC 15416

Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Print Quality Test Specification - Linear Symbols-CORR 13861: April 19, 2002; Supersedes BS EN 1635: 1998;

BSI BS ISO/IEC TR 15846

Information Technology - Software Life Cycle Processes - Configuration Management

BSI DD IEC TS 61000-1-2

Electromagnetic Compatibility (EMC) - Part 1-2: General - Methodology for the Achievement of the Functional Safety of Electrical and Electronic Equipment with Regard to Electromagnetic Phenomena

BSI 2L 77

Forging Stock and Forgings of Aluminium- Copper-Magnesium- Silicon-Manganese Alloy (Solution Treated and Precipitation Treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)

BSI 4A 113

Specification for Cadmium-Plated, Mushroom-Headed, Unified-Thread, Slotted Drive, Bolts-AMD 10624; November 1999; Supersedes BS 3A 113:1962;

BSI BS EN 60831-1

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1kV Part 1: General Performance, testing and rating Safety requirements Guide for installation and operation-AMD 15017: March 10, 2004; IEC 60831-1: 1996

BSI BS EN 61000-2-9

Electromagnetic Compatibility (EMC) Part 2: Environment Section 9: Description of HEMP Environment - Radiated Disturbance - Basic EMC Publication-IEC 1000-2-9: 1996;

BSI BS EN 9111

Quality management systems Assessment applicable to maintenance organizations

BSI BS L 167

Specification for Close Toleranced Sheet and Strip of Aluminium-Coated Aluminium-Copper-Magnesium-Silicon-Manganese Alloy (Solution Treated and Artificially Aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)-AMD 13570: April 5, 2002;

BSI 2SP 83-85

Mushroom Head Aluminium Alloy Rivets for Aircraft-AMD 3266: June 30, 1980

BSI 2TA 2

Sheet and Strip of Commercially Pure Titanium - (Tensile Strength 390-540 N/mm2)-AMD 10740; April 2000;

BSI BS 2SP 47

Single coil spring washers for aircraft-AMD 2891: September 1957

BSI BS 4A 169

Specification for Aluminium Alloy Bolts (Unified Hexagons and Unified Threads) for Aircraft-AMD 16376: June 2006

BSI BS EN 2997-001

Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peak Part 001: Technical specification-:1997

BSI BS EN 9110

Quality systems Model for quality assurance applicable to maintenance organizations

BSI BS EN ISO 16484-5

Building automation and control systems Part 5: Data communication protocol-Supersedes DD ENV 1805-1:1998;

BSI DD IEC/TS 61850-2

Communication networks and systems in substations Part 2: Glossary

BSI L 160

AMD 1 Bars and Extruded Sections of Aluminium- Zinc-Magnesium-Copper- Chromium Alloy (Solution Treated and Artificially Aged to an Overaged Condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)

BSI 2L 95

Plate of Aluminium-Zinc- Magnesium-Copper- Chromium Alloy (Solution Treated, Controlled Stretched and Precipitation Treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15) (AMD 6842) November 29, 1991-Amd 1;

BSI 2S 514

Carbon-manganese steel sheet and strip (for use in the hardened and tempered condition: 770/1 000 MPa) (suitable for welding)-AMD 14155: May 30, 2003; Supersedes BS S 514: 1956;

BSI BS 6221 PART 3

Printed Wiring Boards Part 3: Guide for the Design and Use of Printed Wiring Boards (IEC 326-3: 1991) (S)

BSI BS EN 60598-2-11

Luminaires Part 2-11: Particular requirements Aquarium luminaires

BSI BS EN 60794-1-2

Optical fibre cables Part 1-2: Generic specification Basic optical cable test procedures-AMD 15456: November 26, 2004; Together with BS EN 60794-1-1:2002 Supersedes BS EN 187000:1994

BSI BS EN ISO 16484-2

Building automation and control systems (BACS) Part 2: Hardware

BSI BS ISO/IEC 14882

Programming Languages - C++

BSI PD IEC TR 60825-14

Safety of laser products Part 14: A user's guide

BSI 2A 173

100 Degrees Countersunk Head Steel Bolts (Unified Treads) for Aircraft-AMD 5385 July 29, 1988; Replaces BS A 173: 1956;

BSI BS EN 60794-3

Optical Fibre Cables - Part 3: Sectional Specification - Outdoor Cables-IEC 60794-3: 2001;

BSI PD IEC TR 61000-1-4

Electromagnetic compatability (EMC) Part 1-4: General Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz

BSI BS EN 10217-5

Welded steel tubes for pressure purposes Technical delivery conditions Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties-AMD 15470: March 6, 2006; Together with BS EN 10217-3:2002 supersedes BS 3602-2:1991

BSI BS EN 3303

Screws, Cap Head, Hexagon Socket, Coarse Tolerance Normal Shank, Medium Length Thread, in Alloy Steel, Cadmium Plated - Classification: 1100 MPa (at Ambient Temperature)/235 Degrees C

BSI BS M 34

Method of Preparation and Use of Radiographic Techniques-AMD 13184: December 13, 2001;

BSI BS SP 107-112

Tab Washers for Unified Hexagons for Aircraft-AMD 2577: September 1956; AMD 5272: July 1964; AMD 17121: April 30, 2007

BSI PD 0028

Quantitative software management Software measurement methods A guide to the use of ISO/IEC and other standards for obtaining and using software measurements for product and process improvement

BSI A 275-A 280

Hexagon Self-Locking Nuts with Non-Metallic Locking Inserts. Metric Series-Amd 1;

BSI BS EN 2948

Washers, Tab, in Heat Resisting Steel, Passivated

BSI BS EN 60352-2

Solderless Connections - Part 2: Crimped Connections - General Requirements, Test Methods and Practical Guidance-IEC 60352-2:2006

BSI BS EN 61000-2-10

Electromagnetic Compatibility (EMC) - Part 2-10: Environment - Description of HEMP Environment - Conducted Disturbance-IEC 61000-2-10: 1998;

BSI BS EN 61000-3-11

Electromagnetic Compatibility (EMC) - Part 3-11: Limits - Limitation of Voltage Changes, Voltage Fluctuations and Flicker in Public Low-Voltage Supply Systems - Equipment with Rated Voltage Current Greater than or Equal to 75 A and Subject to Conditional Connection-CORR 13042: February 2001; IEC 61000-3-11:2000;

BSI BS EN 61000-4-9

Electromagnetic Compatibility (EMC) - Part 4-9: Testing and Measurement Techniques - Pulse Magnetic Field Immunity Test-AMD 13059: October 30, 2001; IEC 61000-4-9:1993 + A1:2000;

BSI 2A 110

Steel Nuts (Unified Hexagons and Unified Threads) for Shear Bolts for Aircraft-Amd 4;

BSI 3G 100PT 2: SUBSEC 3.8

General Requirements for Equipment for Use in Aircraft Part 2: All Equipment Section 3: Environmental Conditions Subsection 3.8: Salt Mist-Amd 1;

BSI 4L 56

Tube of Aluminium - 2 1/4% Magnesium Alloy (Temper Designation - 0) (Seamless: Tested Hydraulically) (Not Exceeding 12 mm Wall Thickness) (AMD 5993) August 31, 1988-Amd 1;

BSI BS 4058

Data Processing Flow Chart Symbols, Rules and Conventions

BSI BS EN 2087

Aluminium alloy AL-P2014A T6 or T62 Clad sheet and strip 0,4 mm less than or equal to a less than or equal to 6 mm

BSI BS EN 2635

Aluminium alloy AL-P2014A T6511 Extruded bar and section a or D less than or equal to 200 mm with peripheral coarse grain control

BSI BS EN 4069

Nuts, Hexagonal, Plain, Reduced Height, Reduced Across Flats, in Heat Resisting Steel, Passivated - Classification: 600 MPa (at Ambient Temperature)/650 Degrees C

BSI PD ISO/IEC TR 9126-4

Software engineering Product quality Part 4: Quality in use metrics

BSI 2L 83

Forging Stock, Bars, Extruded Sections and Forgings of Aluminium- Copper-Nickel-Magnesium- Iron-Silicon Alloy (Solution Treated and Precipitation Treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9)

BSI 3A 116

Steel Pan Head Bolts (Unified Threads) for Aircraft (AMD 5386) June 30, 1988-Amd 4;

BSI BS 2TA 6

Specification for Sheet and Strip of Commercially Pure Titanium - (Tensile Strength 570-730 n/mm2)-AMD 10741 July 2000; Incorporating Amendment Nos. 1, 2 and 3;

BSI BS A 31-54

British Association (B.A.) Low Screws and Nuts for Aeronautical Purposes-AMD 4065: February 1961

BSI BS EN 12312-5

Aircraft ground support equipment Specific requirements Part 5: Aircraft fuelling equipment

BSI BS EN 13136

Refrigerating Systems and Heat Pumps - Pressure Relief Devices and Their Associated Piping - Methods for Calculation-AMD 15928: July 31, 2006

BSI BS EN 2101

Chromic Acid Anodizing of Aluminium and Wrought Aluminium Alloys

BSI BS EN 4234

Aerospace series Clamps, worm drive Dimensions, masses

BSI 2SP 91-92

Carbon Steel Worm Drive Clamps for Aircraft-Amd 3;

BSI 2SP 93

Elastomeric Grommets (Acrylonitrile- Butadiene) for Aerospace Use-Amd 1;

BSI 3G 100PT 2: SUBSEC 3.6

General Requirements for Equipment for Use in Aircraft Part 2: All Equipment Section 3: Environmental Conditions Subsection 3.6: Acceleration Requirements-Amd 1;

BSI A 358-2

MJ Threads - Part 2: Limit Dimensions for Bolts and Nuts-Supersedes BS 6293-2:1994; ISO 5855-2:1999;

BSI BS EN 61000-4-28

Electromagnetic compatibility (EMC) Part 4-28: Testing and measurement techniques Variation of power frequency, immunity test-AMD 15275:July 26, 2004; IEC 61000-4-28:1999

BSI BS EN 61204-3

Low Voltage Power Supplies, D.C. Output - Part 3: Electromagnetic Compatibility (EMC)-CORR 14689: September 9, 2003; IEC 61204-3:2000;

BSI BS ISO/IEC 18000-1

Information technology Radio frequency identification for item management Part 1: Reference architecture and definition of parameters to be standardized

BSI BS SP 41-46

Specifications for Tab washers - For aircraft-AMD 2576: September 1956; AMD 5271: July 1964; AMD 17122: April 30, 2007

BSI BS EN 1361

Rubber hoses and hose assemblies for aviation fuel handling Specification-Supersedes BS 3158:1985

BSI PD IEC/TR 61000-2-8

Electromagnetic compatibility (EMC) Part 2-8: Environment Voltage dips and short interruptions on public electric power supply systems with statistical measurement results

BSI S 533

Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening: 1 180/1 370MPa)-AMD 14147: May 27, 2003;

BSI 2A 24

Corrosion-Resisting Steel Hexagon Nuts (B.A. and B.S.F. Threads) (Ordinary, Thin, Slotted and Castle) for Aircraft (AMD 6066) May 31, 1990-Amd 2;

BSI 3L 86

Wire for Solid, Cold- Forged Rivets of Aluminium-Copper- Magnesium Alloy (Not Exceeding 10 mm Diameter) (Cu 2.5, Mg 0.3)

BSI BS EN ISO 9241-8

Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) Part 8: Requirements for Displayed Colours

BSI S 525

Specification for cold-rolled 18/10 chromium-nickel corrosion-resisting steel sheet and strip (niobium stabilized: 800 MPa)-AMD 14152: May 27, 2003; Superseding in Part BS S 520;

BSI S 526

Specification for softened 18/10 chromium-nickel corrosion-resisting steel sheet and strip (titanium stabilized: 540 MPa)-AMD 14151: May 27, 2003; Superseding in Part BS S 521;

BSI 2S 97

2 1/2 Per Cent Nickel- Chromium-Molybdenum Steel (65/75 Tonf/Sq in: Limiting Ruling Section 6 in) (S)-Amd 2;

BSI 5G 178-1

Crimped Joints for Aircraft Electrical Cables and Wires Part 1: Specification for Design Requirements (Including Tests) for Components and Tools (S)

BSI A 358-1

MJ Threads - Part 1: General Requirements-Supersedes BS 6293-1:1994; ISO 5855-1:1999;

BSI BS EN 3341

Aluminium alloy AL-P6061-T4 or T42 Sheet and strip 0,4 mm less than or equal to a less than or equal to 6 mm

BSI BS EN 61000-2-12

Electromagnetic compatibility (EMC) Part 2-12: Environment Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems

BSI BS EN 61000-4-15

Electromagnetic compatibility (EMC) Part 4-15: Testing and measurement techniques Flickermeter Functional and design specifications-AMD 14654: November 6, 2003; IEC 61000-4-15:1997;

BSI BS EN 61000-4-29

Electromagnetic Compatibility (EMC) - Part 4-29: Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations on D.C. Input Power Port Immunity Tests-IEC 61000-4-29:2000;

BSI BS ISO/IEC 15504-5

Information technology Process Assessment Part 5: An exemplar Process Assessment Model

BSI BS SP 57-58

Rivet Burrs for Aircraft-AMD 4700: March 1985; AMD 17123: April 30, 2007

BSI 3A 105

Corrosion-Resisting Steel Nuts (Unified Hexagons and Unified Threads) (Ordinary, Thin, Slotted and Castle) for Aircraft

BSI 3G 100PT 2: SUBSEC 3.1

General Requirements for Equipment for Use in Aircraft Part 2: All Equipment Section 3: Environmental Conditions Subsection 3.1: Vibration-Amd 1;

BSI 3HR 100

Inspection and Testing of Wrought Heat-Resisting Alloys-AMD 8999; March 15, 1996;

BSI 4A 114

Specification for Corrosion-Resisting Steel, Mushroom-Headed, Slotted-Drive, Bolts (Strength a Class 880/1080)-Supersedes 3A 114: 1962;

BSI A 300

Procurement of Alloy Steel Bolts with Strength Classification 1100 MPa and MJ Threads

BSI BS 2A 293

Procurement of self-locking nuts with non-metallic locking elements Metric series Specification-Supersedes BS A 293:1983

BSI BS 2S 142

1 Per Cent Chromium- Molybdenum Steel Billets, Bars, Forgings and Parts (900-1100 MPa: Limiting Ruling Section 40 mm)-Amd 1; Replaces BS S 142: 1968

BSI BS EN 61000-4-14

Electromagnetic Compatibility (EMC) Part 4-14: Testing and measurement techniques Voltage fluctuation immunity test-AMD 15272:July 26, 2004; IEC 61000-4-14:1999

BSI BS EN 61000-5-7

Electromagnetic Compatibility - Part 5-7: Installation and Mitigation Guidelines - Degrees of Protection by Enclosures Against Electromagnetic Disturbances (EM Code)

BSI BS EN 61158-3

Digital data communications for measurement and control Fieldbus for use in industrial control systems Part 3: Data link service definition-Together with BS EN 61158-2:2004, BS EN 61158-4:2004, BS EN 61158-5:2004, BS EN 61158-6:2004 and BS EN 61784-1:2004 Supersedes BS EN 50170:1997 and BS EN 50254:1999