BSI BS EN 10204

Metallic products Types of inspection documents

BSI BS EN 10025-1

Hot rolled products of structural steels Part 1: General technical delivery conditions-Together with BS EN 10025-2 Supersedes BS EN 10025:1993; Together with BS EN 10025-3 Supersedes BS EN 10113-1:1993 and BS EN 10113-2:1993; Together with BS EN 10025-4 Supersedes BS EN 10113-3:1993; Together with BS EN 10025-6 Supersedes BS EN 10137-1:1996 and BS EN 10137-2:1996; Together with BS EN 10025-5 Supersedes BS EN 10155:1993

BSI BS EN 10025-2

Hot rolled products of structural steels Part 2: Technical delivery conditions for non-alloy structural steels-Together with BS EN 10025-1:2004 supersedes BS EN 10025:1993

BSI BS 4-1

Structural Steel Sections - Part 1: Specification for Hot-Rolled Sections

BSI BS EN 10083-1

Steels for quenching and tempering Part 1: General technical delivery conditions

BSI BS EN 10088-1

Stainless steels - Part 1: List of stainless steels

BSI BS EN 10210-1

Hot finished structural hollow sections of non-alloy and fine grain steels Part 1: Technical delivery conditions

BSI BS 4449

Steel for the reinforcement of concrete - Weldable reinforcing steel - Bar, coil and decoiled product - Specification-AMD 17103: April 30, 2007

BSI BS EN 10025-3

Hot rolled products of structural steels Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels-Together with BS EN 10025-1 and BS EN 10025-4 Supersedes BS EN 10113-1:1993; Together with BS EN 10025-1 Supersedes BS EN 10113-2:1993

BSI BS EN 10088-2

Stainless steels Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

BSI BS EN 10088-3

Stainless steels Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes-Supersedes BS 1554:1990

BSI BS EN 10210-2

Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties-CORR 17062: April 30, 2007

BSI BS EN 10225

Weldable Structural Steels for Fixed Offshore Structures - Technical Delivery Conditions-CORR 14055: January 17, 2003; Supersedes BS 7191:1989;

BSI BS EN 485-2

Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties

BSI BS EN 10025-6

Hot rolled products of structural steels Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition-Together with BS EN 10025-1 Supersedes BS EN 10137-1:1996 and BS EN 10137-2:1996

BSI BS EN 10028-1

Flat Products Made of Steels for Pressure Purposes - Part 1: General Requirements-AMD 14284: March 3, 2003;

BSI BS EN 10083-2

Steels for quenching and tempering Part 2: Technical delivery conditions for non alloy steels

BSI BS 8666

Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete Specification

BSI BS EN 10025-4

Hot rolled products of structural steels Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels-Together with BS EN 10025-1 and BS EN 10025-3 Supersedes BS EN 10113-1:1993; Together with BS EN 10025-1 Supersedes BS EN 10113-3:1993

BSI BS EN 10028-3

Flat products made of steels for pressure purposes Part 3: Weldable fine grain steels, normalized

BSI BS EN 10028-2

Flat products made of steels for pressure purposes Part 2: Non-alloy and alloy steels with specified elevated temperature properties-CORR 16824: December 29, 2006

BSI BS EN 10027-1

Designation Systems for Steels - Part 1: Steel Names-:1998

BSI BS EN 10020

Definition and Classification of Grades of Steel

BSI BS 7608

Code of Practice for Fatigue Design and Assessment of Steel Structures (AMD 8337) February 15, 1995 (V)-Amd 1;

BSI BS 8118 PART 1

Structural Use of Aluminium Part 1: Code of Practice for Design-AMD 10485; July 1999;

BSI BS EN 10028-7

Flat products made of steels for pressure purposes Part 7: Stainless steels-CORR 15330:August 17, 2004; Supersedes BS 1501-3:1990

BSI BS EN 10025-5

Hot rolled products of structural steels Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance-Together with BS EN 10025-1 Supersedes BS EN 10155:1993

BSI BS EN 10002-1

Metallic Materials - Tensile Testing - Part 1: Method of Test at Ambient Temperature

BSI BS EN ISO 14692-2

Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 2: Qualification and manufacture-CORR 16390; August 31, 2006

BSI BS 4483

Steel Fabric for the Reinforcement of Concrete - Specification-AMD 17105: April 30, 2007

BSI BS EN 10083-3

Steels for quenching and tempering Part 3: Technical delivery conditions for alloy steels

BSI BS EN 10160

Ultrasonic Testing of Steel Flat Product of Thickness Equal or Greater Than 6 mm (Reflection Method)-(V) Supersedes BS 5996:1993

BSI BS EN 10130

Cold rolled low carbon steel flat products for cold forming Technical delivery conditions

BSI BS EN 10219-1

Cold Formed Welded Structural Hollow Sections of Non-Alloy and Fine Grain Steels - Part 1: Technical delivery conditions

BSI BS EN 755-2

Aluminium and Aluminium Alloys - Extruded Rod/Bar, Tube and Profiles Part 2: Mechanical Properties-CORR 10035: June 1998; Supersedes BS 1474: 1987, BS 4300/12: 1969, BS 4300/15: 1973, BS 4300/4: 1973 and BS 4300/5: 1973;

BSI BS EN 10045-1

Charpy Impact Test on Metallic Materials Part 1: Test Method (V- and U-Notches) (V)

BSI BS EN 485-1

Aluminium and Aluminium Alloys - Sheet, Strip and Plate Part 1: Technical Conditions for Inspection and Delivery (V)

BSI BS EN 10027-2

Designation systems for steels Part 2: Steel numbers

BSI BS EN 10056-1

Structural Steel Equal and Unequal Leg Angles - Part 1: Dimensions-Supersedes BS 4848-4: 1972;

BSI BS EN 1057

Copper and Copper Alloys - Seamless, Round Copper Tubes for Water and Gas in Sanitary and Heating Applications

BSI BS EN 10219-2

Cold formed welded structural hollow sections of non-alloy and fine grain steels Part 2: Tolerances, dimensions and sectional properties

BSI BS EN 515

Aluminium and Aluminium Alloys - Wrought Products - Temper Designations (V)

BSI BS EN 10216-5

Seamless steel tubes for pressure purposes Technical delivery conditions Part 5: Stainless steel tubes-Supersedes BS 3605-1:1991

BSI BS EN 1982

Copper and Copper Alloys - Ingots and Castings-Supersedes BS 1400: 1985 and DD 187: 1990;

BSI BS EN ISO 6507-1

Metallic Materials - Vickers Hardness Test Part 1: Test Method

BSI BS 4482

Steel wire for the reinforcement of concrete products - Specification-AMD 17104: April 30, 2007

BSI BS EN 573-3

Aluminium and aluminium alloys Chemical composition and form of wrought products Part 3: Chemical composition

BSI BS 7448-1

Fracture Mechanics Toughness Tests - Part 1: Method for Determination of KIc, Critical CTOD and Critical J Values of Metallic Materials-CORR 12018:February 27,2002; Partially Superseded by BS EN ISO 12737:1999

BSI BS EN 10095

Heat Resisting Steels and Nickel Alloys-Supersedes BS 1449-2: 1983 and BS 970-1 (Section 5): 1996;

BSI BS EN 1563

Founding - Spheroidal graphite cast irons-AMD 14004: November 1, 2002; AMD 16115: August 2006; Supersedes BS 2789: 1985

BSI BS 3076

Nickel and Nickel Alloys: Bar

BSI BS EN 755-1

Aluminium and Aluminium Alloys - Extruded Rod/Bar, Tube and Profiles Part 1: Technical Conditions for Inspection and Delivery

BSI BS 2752

Chloroprene rubber compounds Specification

BSI BS EN ISO 8503-1

Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates Part 1: Specifications and Definitions for ISO Surface Profile Comparators for the Assessment of Abrasive Blast-Cleaned Surfaces-AMD 8652: December 15, 1995; Renumbers BS 7079:Part C1:1989

BSI BS EN 1652

Corr.1 Copper and Copper Alloys - Plate, Sheet, Strip and Circles for General Purposes-CORR 10198; September 15, 1998; Together with BS EN 1653: 1998 and BS EN 1654: 1998, it Supersedes BS 2870: 1980 and BS 2875: 1969;

BSI BS EN 10079

Definition of steel products

BSI BS 6262-3

Glazing for buildings - Part 3: Code of practice for fire, security and wind loading

BSI BS EN 573-1

Aluminium and aluminium alloys Chemical composition and form of wrought products Part 1: Numerical designation system

BSI BS EN 10164

Steel products with improved deformation properties perpendicular to the surface of the product Technical delivery conditions

BSI BS EN 485-3

Aluminium and aluminium alloys Sheet, strip and plate Part 3: Tolerances on dimensions and form for hot-rolled products

BSI BS 8118 PART 2

Structural Use of Aluminium Part 2: Specification for Materials, Workmanship and Protection-AMD 10486; July 1999

BSI BS EN 10028-6

Flat products made of steels for pressure purposes Part 6: Weldable fine grain steels, quenched and tempered

BSI BS EN 12163

Copper and Copper Alloys - Rod for General Purposes-Together with BS EN 12164 and BS EN 12167, it Supersedes BS 2874: 1986;

BSI BS 7448 PART 2

Fracture Mechanics Toughness Tests Part 2: Method for Determination of KIc, Critical CTOD and Critical J Values of Welds in Metallic Materials

BSI BS EN 10305-1

Steel tubes for precision applications Technical delivery conditions Part 1: Seamless cold drawn tubes-CORR 14626: August 6, 2003; CORR 17112: June 29, 2007; Together with BS EN 10305-4:2003 Supersedes BS 6323-4:1982; Together with BS EN 10296-1:2003, BS EN 10296-2:2005, BS EN 10297-1:2003, BS EN 10305-2:2002, BS EN 10305-3:2002, BS EN 10305-4:2003, BS EN 10305-5:2003 and BS EN 10305-6:2005 Supersedes BS 6323-1:1982

BSI BS EN 10279

Hot rolled steel channels - Tolerances on shape, dimension and mass-CORR 12002: October 2000

BSI BS EN 10255

Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions-AMD 17127: May 31, 2007; CORR 17157: May 31, 2007

BSI BS EN ISO 527-1

Plastics - Determination of Tensile Properties Part 1: General Principles-AMD 8633: July 15, 1996; Also Known as BS 2782-3:METH 321:1994; ISO 527-1: 1993

BSI BS ISO 2230

Rubber Products - Guidelines for Storage-Supersedes BS 3574: 1989;

BSI BS EN ISO 6506-1

Metallic Materials - Brinell Hardness Test - Part 1: Test Method

BSI BS 1449 SEC 1.1

Steel Plate, Sheet and Strip Part 1: Carbon and Carbon-Manganese Plate, Sheet and Strip Section 1.1: General Specification

BSI BS EN 10277-1

Bright steel products - Technical delivery conditions - Part 1: General-Together with BS EN 10278 and BS EN 10277 Parts 2 to 5 Supersedes BS 970-3:1991

BSI BS EN 10028-4

Flat products made of steels for pressure purposes Part 4: Nickel alloy steels with specified low temperature properties-CORR 16825: December 29, 2006

BSI BS EN 60751

Industrial Platinum Resistance Thermometer Sensors (IEC 751: 1983) (V)

BSI BS EN ISO 8502-3

Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for Surface Cleanliness - Part 3: Assessment of Dust on Steel Surface Prepared for Painting (Pressure-Sensitive Tape Method)-AMD 10701: June 2000; Renumbers BS 7079-B3:1993

BSI BS 7079 PART A1

Preparation of Steel Substrates Before Application of Paints and Related Products Group A: Visual Assessment of Surface Cleanliness Part A1: Specification for Rust Grades and Preparation Grades of Uncoated Steel Substrates and of Steel Substrates After Overall Removal of Previous Coatings (V) (ISO 8501-1: 1988) (Read in Conjunction with BS 7079: Part 0. Replaces BS 4232: 1967)

BSI BS EN 12449

Copper and Copper Alloys - Seamless, Round Tubes for General Purposes-Supersedes BS 2871-2:1972;

BSI BS 6262-2

Glazing for buildings Part 2: Code of practice for energy, light and sound

BSI BS EN 485-4

Aluminium and Aluminium Alloys - Sheet, Strip and Plate Part 4: Tolerances on Shape and Dimensions for Cold-Rolled Products (V)

BSI BS EN ISO 8503-2

Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast - Cleaned Steel Substrates Part 2: Method for the Grading of Surface Profile of Abrasive Blast-Cleaned Steel - Comparator Procedure-AMD 8661: December 15, 1995; Renumbers BS 7079:Part C2:1989

BSI BS ISO 1817

Rubber, Vulcanized - Determination of the Effect of Liquids

BSI BS EN 10080

Steel for the reinforcement of concrete Weldable reinforcing steel General

BSI BS EN ISO 8502-2

Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 2: Laboratory determination of chloride on cleaned surfaces

BSI BS EN 10220

Seamless and welded steel tubes - Dimensions and masses per unit length-CORR 16892: February 28, 2007

BSI BS EN ISO 178

Plastics - Determination of flexural properties-CORR 14450: April 9, 2003; AMD 15772: June 30, 2006

BSI BS EN ISO 527-2

Plastics - Determination of Tensile Properties - Part 2: Test Conditions for Moulding and Extrusion Plastics-AMD 8639: November 15, 1996; Renumbers BS 2782PT3: METH 322:1994; Together with BS 2782: Method 321: 1993 Partially Supersedes Methods 320A and 320B given in BS 2782 : Methods 32OA to 32OF : 1976

BSI BS EN 10056-2

Structural Steel Equal and Unequal Leg Angles Part 2: Tolerances on Shape and Dimensions-Partially Replaces BS 4848: Part 4: 1972

BSI BS 2751

General Purpose Acrylonitrile-Butadiene Rubber Compounds - Specification-CORR 13623: December 21, 2001;

BSI BS 1435-2

Rubber hose assemblies for oil suction and discharge services Part 2: Recommendations for storage, testing and use

BSI BS EN 1561

Founding - Grey Cast Irons-Supersedes BS 1452: 1990;

BSI BS EN ISO 8504-2

Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 2: Abrasive Blast-Cleaning-AMD 13361: October 19, 2001; Renumbers BS 7079-D2:2000

BSI BS EN ISO 9227

Corrosion tests in artificial atmospheres Salt spray tests-Supersedes BS 7479: 1991 and BS EN ISO 7253: 2001

BSI BS EN 573-4

Aluminium and Aluminium Alloys - Chemical Composition and Form of Wrought Products Part 4: Forms of products

BSI BS EN 12385-1

Steel wire ropes Safety Part 1: General requirements-CORR 15085: March 17, 2004;

BSI BS EN ISO 6508-1

Metallic materials Rockwell hardness test Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)

BSI BS 6262-7

Glazing for buildings Part 7: Code of practice for the provision of information

BSI BS 7773

Code of Practice for Cleaning and Preparation of Metal Surfaces (V)

BSI BS EN 10045-2

Charpy Impact Test on Metallic Materials Part 2: Method for the Verification of Impact Testing Machines (V)

BSI BS EN ISO 8504-1

Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 1: General Principles-AMD 13360: October 19, 2001; Renumbers BS 7079-D1:2000

BSI BS EN 12164

Copper and Copper Alloys - Rod for Free Machining Purposes-AMD 11036; January 2001; Together with BS EN 12163 and BS EN 12167 it Supersedes BS 2874: 1986;

BSI BS EN 573-2

Aluminium and Aluminium Alloys - Chemical Composition and Form of Wrought Products Part 2: Chemical Symbol Based Designation System (V)

BSI BS EN ISO 18265

Metallic materials Conversion of hardness values-CORR 14919: December 23, 2003; Supersedes BS 860: 1967;

BSI BS EN 12385-4

Steel wire ropes Safety Part 4: Stranded ropes for general lifting applications-Supersedes BS 302-2: 1987;

BSI BS EN 13509

Cathodic protection measurement techniques-CORR 14827: December 1, 2003;

BSI BS EN 10163-1

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements-CORR 17030: April 30, 2007

BSI BS EN ISO 1133

Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

BSI BS EN 10028-5

Flat products made of steels for pressure purposes Part 5: Weldable fine grain steels, thermomechanically rolled

BSI BS EN 755-9

Aluminium and Aluminium Alloys - Extruded Rod/Bar, Tube and Profiles - Part 9: Profiles, Tolerances on Dimensions and Form-CORR 13301:July 2001; Together with BS EN 515:1993, BS EN 573-3 and -4:1995, BS EN 755-1 and -2:1997, BS EN 755-3 Thru -6:1996, BS EN 755-7 and -8:1998, BS EN 455-9:2001, and BS EN 12020-1 and -2:2001 Supersedes BS 1474:1987, BS 4300-4:1973, BS 4300-12:1969 and BS 4300-15:1973;

BSI BS EN ISO 8503-3

Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast -Cleaned Steel Substrates Part 3: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of Surface Profile - Focusing Microscope Procedure-AMD 8653: December 15, 1995; Renumbers BS 7079-C3:1989

BSI BS 1449-1.8

Steel Plate, Sheet and Strip Part 1: Carbon and Carbon-Manganese Plate, Sheet and Strip Section 1.8: Specification for Hot Rolled Narrow Strip Based on Formability

BSI BS EN 10021

General technical delivery conditions for steel products

BSI BS EN ISO 7500-1

Metallic materials Verification of static uniaxial testing machines Part 1: Tension/compression testing machines Verification and calibration of the force-measuring system

BSI BS EN 10293

Steel castings for general engineering uses-Supersedes BS 3100:1991

BSI BS EN 10163-2

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections Part 2: Plate and wide flats

BSI BS EN 1008

Mixing Water for Concrete - Specification for Sampling, Testing and Assessing the Suitability of Water, Including Water Recovered from Processes in the Concrete Industry, as Mixing Water for Concrete-Supersedes BS 3148:1980

BSI BS EN 10277-5

Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering-Together with BS EN 10278 and BS EN 10277 Parts 1 to 4 Supersedes BS 970-3:1991

BSI BS EN 755-3

Aluminium and Aluminium Alloys - Extruded Rod/ Bar, Tube and Profiles Part 3: Round Bars, Tolerances on Dimensions and Form (V)

BSI BS 1449-1.14

14Steel Plate, Sheet and Strip Part 1: Carbon and Carbon-Manganese Plate, Sheet and Strip Section 1.14: Supplied in a Range of Conditions for Heat Treatment and General Engineering Purposes (Continues)

BSI BS 7448-4

Fracture Mechanics Toughness Tests - Part 4: Method for Determination of Fracture Resistance Curves and Initiation Values for Stable Crack Extension in Metallic Materials-CORR 12017:July 2001;

BSI BS EN 10228-3

Non-Destructive Testing of Steel Forgings - Part 3: Ultrasonic Testing of Ferritic or Martensitic Steel Forgings-Together with BS EN 10228-4: 1998, They Supersede BS 4124: 1991;

BSI BS EN 1706

Aluminium and Aluminium Alloys - Castings - Chemical Composition and Mechanical Properties-Partially Supersedes BS 1490:1988;

BSI BS 1154

Natural rubber compounds - Specification

BSI BS EN ISO 6507-2

Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines

BSI BS EN 13601

Copper and Copper Alloys - Copper Rod, Bar and Wire for General Electrical Purposes-Supersedes BS 1432: 1987 and BS 1433: 1970;

BSI BS EN 10278

Dimensions and tolerances of bright steel products-Together with BS EN 10277 Parts 1 to 5 Supersedes BS 970-3:1991

BSI BS EN 755-7

Aluminium and Aluminium Alloys - Extruded Rod/Bar, Tube and Profiles - Part 7: Seamless Tubes, Tolerances on Dimensions and Form

BSI BS EN 10143

Continuously hot-dip coated steel sheet and strip Tolerances on dimensions and shape

BSI BS EN ISO 8503-4

Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates Part 4: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of Surface Profile - Stylus Instrument Procedure-AMD 8654: December 15, 1995; Renumbers BS 7079 PART C4:1989

BSI BS 903-0

Physical testing of rubber Part 0: General

BSI BS EN ISO 868

Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)-CORR 14577; July 11, 2003;

BSI BS EN 10087

Free cutting steels Technical delivery conditions for semi-finished products, hot-rolled bars and rods-CORR 10442: February, 1999; CORR 15803: January 23, 2006; Together with BS EN 10083-1: 1991, BS EN 10084: 1998, BS EN 10088-1: 1995, BS EN 10088-2: 1995 and BS EN 10088-3: 1995 supersedes BS 970-1: 1996

BSI BS 903-A26

Physical Testing of Rubber - Part A26: Method for Determination of Hardness (Hardness Between 10 IRHD and 100 IRHD)-AMD 13157:August 2001; ISO 48:1994;

BSI BS EN 10163-3

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections Part 3: Sections

BSI BS 2050

Electrical Resistance of Conducting and Antistatic Products Made from Flexible Polymeric Material-AMD 4499: May 15, 1984; Partially Superseded by BS ISO 2878: 2005

BSI BS EN 10277-3

Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels-Together with BS EN 10278 and BS EN 10277 Parts 1,2,4 and 5 Supersedes BS 970-3:1991;

BSI BS 4978

Visual strength grading of softwood - Specification

BSI BS EN 10111

Continuously Hot-Rolled Low Carbon Steel Sheet and Strip for Cold Forming - Technical Delivery Conditions-Supersedes BS 1449: Section 1.2: 1991;

BSI BS EN ISO 11124-1

Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives Part 1: General Introduction and Classification-AMD 9589: September 1997; Renumbers BS 7079: Part E1: 1994

BSI BS EN 755-5

Aluminium and Aluminium Alloys - Extruded Rod/ Bar, Tube and Profiles - Part 5: Rectangular Bars, Tolerances on Dimensions and Form (V)

BSI BS ISO 10204

Iron ores Determination of magnesium Flame atomic absorption spectrometric method-:1993

BSI BS EN 10213-2

Technical Delivery Conditions for Steel Castings for Pressure Purposes Part 2: Steel Grades for Use at Room Temperature and at Elevated Temperature (V)

BSI BS EN 10305-2

Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes-CORR 14627: August 6, 2003; CORR 17111: June 29, 2007; Together with BS EN 10305-3:2002 and BS EN 10305-6:2005 Supersedes BS 6323-6:1982; Together with BS EN 10296-1:2003, BS EN 10296-2:2005, BS EN 10297-1:2003, BS EN 10305-1:2002, BS EN 10305-3:2002, BS EN 10305-4:2003, BS EN 10305-5:2003 and BS EN 10305-6:2005 Supersedes BS 6323-1:1982

BSI BS EN 60534-1

Industrial-process control valves Part 1: Control valve terminology and general considerations-CORR 15662: April 19, 2005

BSI PD 970

Wrought steels for mechanical and allied engineering purposes Requirements for carbon, carbon manganese and alloy hot worked or cold finished steels-CORR 15637: May 18, 2005

BSI BS EN ISO 8504-3

Preparation of Steel Substrates Before Application of Paints and Related Products - Part 3: Hand - and Power-Tool Cleaning-AMD 13357: October 17, 2001; Renumbers BS 7079-D3:1993

BSI BS EN 10089

Hot rolled steels for quenched and tempered springs Technical delivery conditions-Supersedes BS 970-2:1988

BSI BS EN 12499

Internal cathodic protection of metallic structures-CORR 14828: December 1, 2003; CORR 16497: July 31, 2006

BSI BS EN ISO 527-3

Plastics - Determination of Tensile Properties - Part 3: Test Conditions for Films and Sheets-CORR 13253: August 2001; CORR 15005: March 16, 2004; Supersedes BS 2782: Part 3: Methods 326A to 326C: 1977; Also Known as BS 2782-3 Method 326E

BSI BS EN 12472

Method for the simulation of wear and corrosion for the detection of nickel release from coated items

BSI BS EN 755-4

Aluminium and Aluminium Alloys - Extruded Rod/ Bar, Tube and Profiles Part 4: Square Bars, Tolerances on Dimensions and Form (V)

BSI BS EN ISO 8502-9

Preparation of Steel Substrates Before Application of Paints and Related Products - Group B: Methods for the Assessment of Surface Cleanliness - Part B9: Field Method for the Conductometric Determination of Water-Soluble Salts-AMD 12095:June 2001; Renumbers BS 7079-B9:1998

BSI BS EN 10305-3

Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes-CORR 14628: August 6, 2003; CORR 17110: June 29, 2007; Together with BS EN 10296-1:2003 and BS EN 10305-5:2003 Supersedes BS 6323-5:1982; Together with BS EN 10305-2:2002 and BS EN 10305-6:2005 it supersedes BS 6323-6:1982; Together with BS EN 10296-1:2003, BS EN 10296-2:2005, BS EN 10297-1:2003, BS EN 10305-1:2002, BS EN 10305-2:2002, BS EN 10305-4:2003, BS EN 10305-5:2003 and BS EN 10305-6:2005 Supersedes BS 6323-1:1982

BSI BS EN 12451

Copper and Copper Alloys - Seamless, Round Tubes for Heat Exchangers-Supersedes BS 2871: Part 3: 1972;

BSI BS EN ISO 7438

Metallic materials - Bend test

BSI BS ISO 1431-3

Rubber, Vulcanized or Thermoplastic - Resistance to Ozone Cracking - Part 3: Reference and Alternative Methods for Determining the Ozone Concentration in Laboratory Test Chambers-Also Known as BS 903-A45:2000

BSI BS EN 1564

Founding - Austempered Ductile Cast Irons-AMD 16225: April 28, 2006; AMD 9893: January 15, 1998;

BSI BS EN 10297-1

Seamless circular steel tubes for mechanical and general engineering purposes Technical delivery conditions Part 1: Non-alloy and alloy steel tubes-CORR 14629: August 6, 2003; Supersedes BS 6323-3: 1982;

BSI BS EN 10051

Continuously Hot-Rolled Uncoated Plate, Sheet and Strip of Non-Alloy and Alloy Steels - Tolerances on Dimensions and Shape-AMD 9872; February 1998;

BSI BS EN 10131

Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming Tolerances on dimensions and shape

BSI BS 3734-1

Rubber - Tolerances for Products - Part 1: Dimensional Tolerances-AMD 13324: October 16,2001; ISO 3302-1: 1996;

BSI BS EN ISO 8502-4

Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 4: Guidance on the Estimation of the Probability of Condensation Prior to Paint Application-AMD 10700: June 2000; Renumbers BS 7079-B4: 1993

BSI NA TO BS EN 1991-1-3

UK National Annex to Eurocode 1: Actions on structures Part 1-3: General actions Snow loads-CORR 17170: June 29, 2007

BSI BS 2572

Phenolic Laminated Sheet and Epoxy Cotton Fabric Laminated Sheet-AMD 8841: October 15, 1995; Supersedes BS 5102: 1974; Partially superseded by BS EN 60893-2: 1995;

BSI BS 7448-3

Fracture mechanics toughness tests Part 3: Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPaÂÂm0.5s-1

BSI BS EN ISO 8502-10

Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 10: Field method for the titrimetric determination of water-soluble chloride-AMD 15514:February 2, 2005; Renumbers BS 7079-B10:2000; Also known as BS 7079-B10:2004

BSI BS EN ISO 11124-3

Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives Part 3: High-Carbon Cast-Steel Shot and Grit-AMD 9722: November 1997; Renumbers BS 7079: Part E3: 1994; Partially Supersedes BS 2451: 1963

BSI BS EN 12020-1

Aluminium and Aluminium Alloys - Extruded Precision Profiles in Alloys EN AW-6060 and EN AW-6063 - Part 1: Technical Conditions for Inspection and Delivery-Together with BS EN 515:1993, BS EN 573-3 and -4:1995, BS EN 755-1 and -2:1997, BS EN 755-3 Thru -6:1996, BS EN 755-7 and -8:1998, BS EN 755-9:2001, and BS EN 12020-2:2001 it Supersedes BS 1474:1987;

BSI BS EN ISO 11124-4

Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives Part 4: Low-Carbon Cast-Steel Shot-AMD 9723: November 1997; Renumbers as BS 7079: Part E4:1994; Together with BS EN ISO 11124 Part 3 Supersedes BS 2451: 1963

BSI BS EN ISO 11124-2

Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives Part 2: Chilled-Iron Grit-AMD 9721: November 1997; Renumbers as BS 7079: Part E2: 1994

BSI BS EN 10162

Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances-Supersedes BS 2994: 1976;

BSI BS EN 736-3

Valves - Terminology - Part 3: Definition of terms-AMD 14094: October 24, 2002;

BSI BS EN ISO 8502-5

Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)-Also known as BS 7079-BS:2004

BSI DD ENV ISO 8502-1

Preparation of Steel Substrates before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 1: Field Test for Soluble Iron Corrosion Products-AMD 10892: March 2001; Renumbers DD 207: 1992

BSI BS EN 12020-2

Aluminium and Aluminium Alloys - Extruded Precision Profiles in Alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on Dimensions and Form-Together with BS EN 515:1993, BS EN 573-3 and -4:1995, BS EN 755-1 and -2:1997, BS EN 755-3 Thru -6:1996, BS EN 755-7 and -8:1998, BS EN 755-9:2001, and BS EN 12020-1:2001 it Supersedes BS 1474:1987;

BSI BS EN 736-1

Valves - Terminology Part 1: Definition of Types of Valves (V)

BSI BS EN 10228-4

Non-Destructive Testing of Steel Forgings - Part 4: Ultrasonic Testing of Austenitic and Austenitic-Ferritic Stainless Steel Forgings-AMD 13204; September 2001; Together with BS EN 10228-3: 1998, Supersedes BS 4124: 1991;

BSI BS EN ISO 180

Plastics - Determination of Izod impact strength-AMD 16990: March 30, 2007

BSI BS EN ISO 8502-8

Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 8: Field method for the refractometric determination of moisture-AMD 15515:February 2, 2005; Renumbers BS 7079-B8:2001; Also known as BS 7079-B8:2004

BSI BS EN 10090

Valve Steels and Alloys for Internal Combustion Engines-Supersedes BS 970-4:1970

BSI BS EN 755-8

Aluminium and Aluminium Alloys - Extruded Rod/Bar; Tube and Profiles - Part 8: Porthole Tubes, Tolerances on Dimensions and Form

BSI BS EN ISO 11126-1

Preparation of Steel Substrates Before Application of Paints and Related Products Group F: Non-Metallic Blast Cleaning Abrasives Part F1: General Introduction and Classification-Supersedes BS 7079 Part F1:1994; Also Known as BS 7079 Part F1:1997

BSI BS EN ISO 6507-4

Metallic materials Vickers hardness tests Part 4: Tables of hardness values

BSI BS EN 10305-5

Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes-CORR 17008: March 30, 2007

BSI BS EN 1653

Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units-AMD 12044: May 2001; Together with BS EN 1652: 1998 and BS EN 1654: 1998, it supersedes BS 2870: 1980 and BS 2875: 1969;

BSI BS EN ISO 3651-2

Determination of Resistance to Intergranular Corrosion of Stainless Steels - Part 2: Ferritic, Austenitic and Ferritic-Austenitic (Duplex) Stainless Steels - Corrosion Test in Media Containing Sulfuric Acid-Supersedes BS 5903: 1980;

BSI BS EN ISO 4957

Tool Steels-Supersedes BS 4659:1989

BSI BS EN 1976

Copper and copper Alloys - Cast Unwrought Copper Products-Together with BS EN 1978:1998 Supersedes BS 6017:1981

BSI BS 7079 PART 0

Preparation of Steel Substrates Before Application of Paints and Related Products Part 0: Introduction

BSI BS EN 10228-1

Non-Destructive Testing of Steel Forgings - Part 1: Magnetic Particle Inspection

BSI BS EN ISO 1872-2

Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

BSI BS 3072

Nickel and Nickel Alloys: Sheet and Plate

BSI BS EN ISO 6975

Natural gas Extended analysis Gas chromatographic method-AMD 16104: February 2006;:1997

BSI BS ISO 37

Rubber, vulcanized or thermoplastic Determination of tensile stress-strain properties-Supersedes BS 903 Part A2: 1995

BSI BS EN ISO 527-5

Plastics - Determination of Tensile Properties Part 5: Test Conditions for Unidirectional Fibre-Reinforced Plastic Composites-Also Numbered as BS 2782: PT 3: METH 326G: 1997;

BSI BS 2782-3 METH 340A-B

Methods of Testing Plastics - Part 3: Mechanical Properties - Method 340A: Determination of Shear Strength of Moulding Material - Method 340B: Determination of Shear Strength of Sheet Material-AMD 5168: July 1987

BSI BS EN ISO 11126-10

Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 10: Almandite garnet-AMD 15511:February 2, 2005; Renumbers BS 7079-F10:2000; Also known as BS 7079-F10:2004

BSI BS EN ISO 11357-1

Plastics - Differential Scanning Calorimetry (DSC) Part 1: General Principles

BSI BS EN 10139

Cold Rolled Uncoated Mild Steel Narrow Strip for Cold Forming - Technical Delivery Conditions-Supersedes BS 1449: Section 1.9: 1991;

BSI BS EN 10270-3

Steel Wire for Mechanical Springs - Part 3: Stainless Spring Steel Wire-Supersedes BS 2056:1991;

BSI BS EN 572-8

Glass in building Basic soda lime silicate glass products Part 8: Supplied and final cut sizes

BSI BS EN ISO 8502-12

Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 12: Field method for the titrimetric determination of water-soluble ferrous ions-AMD 15513:February 3, 2005; Renumbers BS 7079-B12:2003; Also known as BS 7079-B12:2004

BSI BS 1052

Mild steel wire for general engineering purposes-AMD 6530: May 1991;

BSI BS EN 10277-4

Bright steel products - Technical delivery conditions - Part 4: Case-hardening steels-Together with BS EN 10278 and BS EN 10277 Parts 1,2,3 and 5 Supersedes BS 970-3:1991;

BSI BS EN ISO 1043-1

Plastics - Symbols and Abbreviated Terms - Part 1: Basic Polymers and Their Special Characteristics-CORR 13827: April 02, 2002; ISO 1043-1: 2001;

BSI BS EN ISO 527-4

Plastics - Determination of Tensile Properties Part 4: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites-Also Numbered as BS 2782: PT 3: METH 326F: 1997;

BSI BS 5756

Visual grading of hardwood - Specification

BSI BS EN 10067

Hot Rolled Bulb Flats - Dimensions and Tolerances on Shape, Dimensions and Mass-Supersedes BS 4848: Part 5: 1980;

BSI BS EN 438-1

High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (Usually called Laminates) Part 1: Introduction and general information-Together With BS EN 438 Parts 2 thru 7 supersedes BS EN 438-2:1991

BSI BS 3412

General Purpose Polyethylene Materials for Moulding and Extrusion (V)

BSI BS EN 10132-4

Cold rolled narrow steel strip for heat treatment Ð Technical delivery conditions Ð Part 4: Spring steels and other applications-Together with BS EN 10132-1 it Supersedes BS 5770 Parts 1,2 and 3:1981;

BSI BS EN 10228-2

Non-Destructive Testing of Steel Forgings - Part 2: Penetrant Testing

BSI BS EN 764-1

Pressure equipment Part 1: Terminology Pressure, temperature, volume, nominal size-Supersedes BS EN 764:1995

BSI BS EN ISO 6506-2

Metallic Materials - Brinell Hardness Test - Part 2: Verification and calibration of testing machines

BSI BS EN ISO 6507-3

Metallic materials Vickers hardness test Part 3: Calibration of reference blocks

BSI BS EN 10024

Hot Rolled Taper Flange I Sections - Tolerances on Shape and Dimensions-AMD 8995: December 15, 1995;

BSI BS EN 12167

Copper and Copper Alloys - Profiles and Rectangular Bar for General Purposes-Together with BS EN 12163 and BS EN 12164 it Supersedes BS 2874: 1986;

BSI BS EN ISO 1183-1

Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method-CORR 15108: April 8, 2004;

BSI BS 131-1

Methods for Notched Bar Tests Part 1: The Izod Impact Test on Metals-Amd 2;

BSI BS 7079 PT A1: SUPP 1

Prep of Steel Substrates Before Application of Paints and Related Prods Grp A: Visual Assessment of Surface Cleanliness Pt A1: Spec for Rust Grades and Prep Grades of Uncoated Steel Substrates and of Steel Substrates After Overal Reoval of Previous Coating Supp 1: Representative Photographic Examples of the Change of Appearance Imparted to Steel When Blast-Cleaned with Different Abrasives-ISO 8501-1:Informative Supplement: 1994

BSI BS EN 15257

Cathodic protection - Competence levels and certification of cathodic protection personnel

BSI BS 1088-1

Marine plywood Part 1: Requirements-Together with BS 1088-2:2003 Supersedes BS 1088 & 4079:1966;

BSI BS EN 10052

Vocabulary of Heat Treatment Terms for Ferrous Products (V)

BSI BS EN 27963

Calibration Block No. 2 for Ultrasonic Examination of Welds-Together with BS EN 12223: 2000, Supersedes BS 2704: 1978; ISO 7963: 1985;

BSI BS EN 10246-7

Non-destructive testing of steel tubes Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections

BSI BS EN ISO 7539-7

Corrosion of metals and alloys Stress corrosion testing Part 7: Method for slow strain rate testing

BSI BS 5383

Material Identification of Steel, Nickel Alloy and Titanium Alloy Tubes by Continuous Character Marking and Colour Coding of Steel Tubes

BSI BS EN 10213-3

Corr.1 Technical Delivery Conditions for Steel Castings for Pressure Purposes Part 3: Steels for Use at Low Temperatures-CORR 10195; September 15, 1998; Together with Parts 1,2 and 4, it Supersedes BS 1504: 1976;

BSI PD 6525 PART 1

Elevated Temperature Properties for Steels for Pressure Purposes Part 1: Stress Rupture Properties-AMD 8802: December 15, 1995

BSI BS 5409 PART 1

Specification for Nylon Tubing Part 1: Fully Placticized Nylon Tubing Types 11 and 12 for Use Primarily in Pneumatic Installations-Amd 1;

BSI BS EN 10055

Hot Rolled Steel Equal Flange Tees with Radiused Root and Toes - Dimensions and Tolerances on Shape and Dimensions (V)

BSI BS EN 10327

Continuously hot-dip coated strip and sheet of low carbon steels for cold forming Technical delivery conditions-Supersedes BS EN 10142:2000, and together with BS EN 10326:2006, supersedes BS EN 10154:2004:1995 and BS EN 10215:1995

BSI BS EN ISO 7539-1

Corrosion of Metals and Alloys - Stress Corrosion Testing Part 1: General Guidance on Testing Procedures-AMD 8715: October 1995

BSI BS EN 10244-2

Steel Wire and Wire Products - Non-Ferrous Metallic Coatings on Steel Wire - Part 2: Zinc or Zinc Alloy Coatings-CORR 13233: September 14, 2001; Supersedes BS 443: 1982;

BSI BS EN 10270-1

Steel Wire for Mechanical Springs - Part 1: Patented Cold Drawn Unalloyed Spring Steel Wire-Supersedes BS 5216:1991;

BSI BS EN 1676

Aluminium and Aluminium Alloys - Alloyed Ingots for Remelting - Specifications-Partially Supersedes BS 1490: 1988;

BSI BS EN 60320-1

Appliance Couplers for Household and Similar General Purposes Part 1: General Requirements

BSI BS EN ISO 377

Steel and Steel Products - Location and Preparation of Samples and Test Pieces for Mechanical Testing

BSI BS ISO 11463

Corrosion of Metals and Alloys - Evaluation of Pitting Corrosion

BSI BS ISO 188

Rubber, Vulcanized or Thermoplastic - Accelerated Ageing and Heat Resistance Tests-CORR 14802: November 26, 2003; Supersedes BS 903-A19:1986; Also Known as BS 903-A19:1998

BSI BS EN 10283

Corrosion Resistant Steel Castings

BSI BS EN 12735-1

Copper and copper alloys Seamless, round copper tubes for air-conditioning and refrigeration Part 1: Tubes for piping systems-AMD 16627: September 29, 2006

BSI BS EN 14179-1

Glass in building Heat soaked thermally toughened soda lime silicate safety glass Part 1: Definition and description

BSI BS EN ISO 7539-6

Corrosion of metals and alloys Stress corrosion testing Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement-CORR 14438:April 4, 2003;

BSI BS 1088-2

Marine plywood Part 2: Determination of bonding quality using the knife test-Together with BS 1088-1:2003 Supersedes BS 1088 & 4079:1966;

BSI BS 1407

High Carbon Bright Steel (Silver Steel) (V)-Amd 1;

BSI BS 3146 PART 2

Investment Castings in Metal Part 2: Corrosion and Heat Resisting Steels, Nickel and Cobalt Base Alloys-Amd 1;

BSI BS EN 10296-2

Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel-CORR 17061: April 30, 2007

BSI BS EN 12201-4

Plastic Piping Systems for Water Supply Polyethylene (PE) Part 4: Valves

BSI BS EN ISO 3651-1

Determination of Resistance to Intergranular Corrosion of Stainless Steels - Part 1: Austenitic and Ferritic-Austenitic (Duplex) Stainless Steels - Corrosion Test in Nitric Acid Medium by Measurement of Loss in Mass (Huey Test)

BSI BS EN ISO 4892-1

Plastics - Methods of Exposure to Laboratory Light Sources - Part 1: General Guidance-AMD 13148: 9/17/2001; Renumbers BS 2782-5: Method 540D: 1999

BSI BS 2S 140

Specification for 2

BSI BS EN 10268

Cold rolled steel flat products with high yield strength for cold forming Technical delivery conditions

BSI BS EN ISO 13000-1

Plastics Polytetrafluoroethylene (PTFE) semi-finished products Part 1: Requirements and designation

BSI BS EN ISO 75-1

Plastics Determination of temperature of deflection under load Part 1: General test method

BSI BS EN 10085

Nitriding Steel - Technical Delivery Conditions

BSI BS EN 10140

Cold rolled narrow steel strip Tolerances on dimensions and shape

BSI BS EN 10296-1

Welded circular steel tubes for mechanical and general engineering purposes Technical delivery conditions Part 1: Non-alloy and alloy steel tubes-Supersedes BS 6323-7:1982; Supersedes BS 6323 PART 2:1982

BSI BS EN ISO 6508-2

Metallic Materials - Rockwell Hardness Test - Part 2: Verification and Calibration of Testing Machines (Scales A, B, C, D, E, F, G, H, K, N, T)

BSI BS EN ISO 9400

Nickel-Based Alloys - Determination of Resistance to Intergranular Corrosion

BSI BS 2571

General-Purpose Flexible PVC Compounds for Moulding and Extrusion

BSI BS 3075

Nickel and Nickel Alloys: Wire-Amd 1;

BSI BS 3953

Synthetic Resin Bonded Woven Glass Fabric Laminated Sheet (AMD 8840) October 15, 1995 (V)-Amd 2;

BSI BS 903 PART A6

Physical Testing of Rubber Part A6: Method for Determination of Compression Set at Ambient, Elevated or Low Temperatures (AMD 7975) March 15, 1994 (ISO 815: 1991) (V)-Amd 1;

BSI BS EN 10229

Evaluation of Resistance of Steel Products to Hydrogen Induced Cracking (HIC)

BSI BS EN ISO 12162

Thermoplastics Materials for Pipes and Fittings for Pressure Applications - Classification and Designation - Overall Service (Design) Coefficient(V)

BSI BS EN ISO 6506-4

Metallic materials Brinell hardness test Part 4: Table of hardness values

BSI BS EN 10149-2

Specification for Hot-rolled flat products made of high yield strength steels for cold forming Part 2: Delivery conditions for thermomechanically rolled steels-AMD 9546; July 2,1997; Supersedes BS 1449 : Section 1.4:1991 and BS 1449 : Section 1.10 : 1991;

BSI BS ISO 11357-2

Plastics - Differential Scanning Calorimetry (DSC) - Part 2: Determination of Glass Transition Temperature

BSI BS EN 12385-5

Steel wire ropes Safety Part 5: Stranded ropes for lifts-Supersedes BS 302-4: 1987;

BSI BS EN ISO 6508-3

Metallic materials Rockwell hardness test Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)

BSI BS EN ISO 11126-3

Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 3: Copper refinery slag-AMD 9843: February 1998; Renumbers as BS 7079-F3: 1994

BSI BS EN 10058

Hot rolled flat steel bars for general purposes Dimensions and tolerances on shape and dimensions

BSI BS EN 13599

Copper and copper alloys Copper plate, sheet and strip for electrical purposes-Supersedes BS 4608: 1970;

BSI BS EN 1386

Aluminium and Aluminium Alloys - Tread Plate - Specifications

BSI BS ISO 5893

Rubber and Plastics Test Equipment Tensile, Flexural and Compression Types (Constant Rate of Traverse) Specification-Supersedes BS 5214-1: 1995;

BSI BS 5288

Sealed Radioactive Sources

BSI BS EN 1369

Founding - Magnetic Particle Inspection-Supersedes BS 4080:Part 1:1989;

BSI BS EN 438-2

High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (Usually called Laminates) Part 2: Determination of properties-Together with BS EN 438 Parts 1 and 3 to 7 supersedes BS EN 438-1:1991

BSI BS 1186-3

Timber for and Workmanship in Joinery Part 3: Specification for Wood Trim and Its Fixing-AMD 9386: April 15, 1997; Supersedes BS 584: 1967;

BSI BS 3146 PART 1

Investment Castings in Metal Part 1: Carbon and Low Alloy Steels

BSI BS EN 10223-2

Steel Wire and Wire Products for Fences - Part 2: Hexagonal Steel Wire Netting for Agricultural, Insulation and Fencing Purposes-AMD 15204: July 5, 2004;

BSI BS EN 10240

Internal and/or External Protective Coatings for Steel Tubes - Specification for Hot Dip Galvanized Coatings Applied in Automatic Plants

BSI BS EN 12165

Copper and Copper Alloys - Wrought and Unwrought Forging Stock-Supersedes BS 2872: 1989;

BSI BS EN ISO 175

Plastics - Methods of Test for the Determination of the Effects of Immersion in Liquid Chemicals-AMD 13097: May 2001; Renumbers BS 2782-8:Method 830A:1999

BSI BS EN ISO 4892-2

Plastics Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps

BSI BS ISO 11357-3

Plastics - Differential Scanning Calorimetry (DSC) - Part 3: Determination of Temperature and Enthalpy of Melting and Crystallization

BSI BS ISO 7619-1

Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)-Together with BS ISO 7619-2:2004, supersedes BS 903-A57:1997

BSI BS 903 PART A1

Physical Testing of Rubber Part A1: Determination of Density (ISO 2781: 1988) (V)

BSI BS EN 10106

Cold Rolled Non-Oriented Electrical Steel Sheet and Strip Delivered in the Fully Processed State (V)

BSI BS EN 10308

Non-Destructive Testing - Ultrasonic Testing of Steel Bars

BSI BS EN 12588

Lead and Lead Alloys - Rolled Lead Sheet for Building Purposes

BSI BS EN 10306

Iron and Steel - Ultrasonic Testing of H Beams with Parallel Flanges and IPE Beams

BSI BS EN ISO 11126-4

Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast Cleaning Abrasives Part 4: Coal Furnance Slag-AMD 10090 August 1998; Also Known as BS 7079: Part F4: 1994;

BSI BS EN ISO 62

Plastics - Determination of Water Absorption-Supersedes BS 2782-4: Methods 430A to 430D: 1983;

BSI BS EN ISO 7539-2

Corrosion of Metals and Alloys - Stress Corrosion Testing Part 2: Preparation and Use of Bent-Beam Specimens-AMD 8714: October 1994; Formerly BS 6980: Part 2: 1990

BSI BS EN ISO 7539-4

Corrosion of Metals and Alloys - Stress Corrosion Testing Part 4: Preparation and Use of Uniaxially Loaded Tension Specimens-AMD 8713; October 1995; Formerly BS 6980: Part 4: 1990

BSI BS 2782-1:METHOD 140E

Methods of Testing Plastics - Part 1: Thermal Properties - Method 140E. Flammability of a Small, Inclined Test Piece Exposed to an alcohol Flame (Laboratory Method)-AMD 5439: April 1987

BSI BS 5589

Code of Practice for Preservation of Timber

BSI BS EN 10297-2

Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel-CORR17060: April 30, 2007

BSI BS EN 1654

Copper and copper alloys Strip for springs and connectors-CORR 14412: March 27, 2003; Together with BS EN 1652:1998 and BS EN 1653:1998 it supersedes BS 2870:1980;