|
BSI BS EN ISO 8501-1 |
Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings-AMD 13362: December 2002; Also Known as BS 7079-A1:1989; 28 Photos cannot be reproduced |
|
BSI BS EN 1473 |
Installation and equipment for liquefied natural gas — Design of onshore installations |
|
BSI BS 381C |
Colours for Identification, Coding and Special Purposes |
|
BSI BS EN ISO 13706 |
Petroleum, petrochemical and natural gas industries Air-cooled heat exchangers |
|
BSI BS EN ISO 16812 |
Petroleum, petrochemical and natural gas industries — Shell-and-tube heat exchangers |
|
BSI BS EN 590 |
Automotive fuels — Diesel — Requirements and test methods-CORR 17164: June 29, 2007 |
|
BSI BS EN ISO 13705 |
Petroleum, petrochemical and natural gas industries Fired heaters for general refinery service |
|
BSI BS EN ISO 13628-6 |
Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems-: 2000 |
|
BSI BS EN 228 |
Automotive fuels — Unleaded petrol — Requirements and test methods-CORR 17166: June 29, 2007 |
|
BSI BS EN 14214 |
Automotive fuels Fatty acid methyl esters (FAME) for diesel engines Requirements and test methods-AMD 15183:May 14, 2004 |
|
BSI BS EN ISO 13628-2 |
Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications |
|
BSI BS ISO 23251 |
Petroleum, petrochemical and natural gas industries Pressure-relieving and depressuring systems |
|
BSI BS EN 60898-1 |
Electrical accessories Circuit breakers for overcurrent protection for household and similar installations Part 1: Circuit-breakers for a.c. operation-AMD 15779: October 31, 2006;:1991 |
|
BSI BS EN ISO 6976 |
Natural gas — Calculation of calorific values, density, relative density and Wobbe index from composition |
|
BSI BS EN ISO 14224 |
Petroleum, petrochemical and natural gas industries — Collection and exchange of reliability and maintenance data for equipment |
|
BSI BS 2869 |
Fuel oils for agricultural, domestic and industrial engines and boilers - Specifications-AMD 16678:September 2006 |
|
BSI BS ISO 8217 |
Petroleum products Fuels (class F) Specifications of marine fuels-:1996 |
|
BSI BS EN ISO 19901-2 |
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria |
|
BSI BS EN ISO 4624 |
Paints and varnishes Pull-off test for adhesion-Supersedes BS EN 24624: 1993; Also known as BS 3900-E10: 2003 |
|
BSI BS ISO 15649 |
Petroleum and Natural Gas Industries - Piping |
|
BSI BS EN ISO 19901-1 |
Petroleum and natural gas industries Specific requirements for offshore structures Part 1: Metocean design and operating considerations |
|
BSI BS EN ISO 2409 |
Paints and varnishes - Cross-cut test |
|
BSI BS EN ISO 12944-2 |
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 2: Classification of Environments-Together with the Other Seven Parts of BS EN ISO 12944, it Partially Supersedes BS 5493: 1977; |
|
BSI BS EN ISO 12944-1 |
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 1: General Introduction-Together with the Other Seven Parts of BS EN ISO 12944, it Partially Supersedes BS 5493: 1977; |
|
BSI BS EN ISO 4628-3 |
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting-CORR 14877: November 25, 2003; Supersedes BS 3900-H3:1983; Also Known As BS 3900-H3:2003 |
|
BSI BS EN ISO 2808 |
Paints and Varnishes - Determination of Film Thickness |
|
BSI BS EN ISO 12944-4 |
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 4: Types of Surface and Surface Preparation-Together with the Other Seven Parts of BS EN ISO 12944, it Partially Supersedes BS 5493: 1977; |
|
BSI BS EN ISO 12944-5 |
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 5: Protective Paint Systems-Together with the Other Seven Parts of BS EN ISO 12944, it Partially Supersedes BS 5493: 1977; |
|
BSI BS EN ISO 19901-5 |
Petroleum and natural gas industries Specific requirements for offshore structures Part 5: Weight control during engineering and construction |
|
BSI BS 4652 |
Zinc-Rich Priming Paint (Organic Media)-AMD 10074 July 1998; |
|
BSI BS EN 60065 |
Audio, video and similar electronic apparatus – Safety requirements-CORR 14137: February 14, 2003; AMD 16501: October 31, 2006;:1997 |
|
BSI BS ISO 13704 |
Petroleum and Natural Gas Industries - Calculation of Heater-Tube Thickness in Petroleum Refineries-CORR 15176: May 21, 2004 |
|
BSI BS EN ISO 12944-3 |
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 3: Design Considerations-Together with the Other Seven Parts of BS EN ISO 12944, it Partially Supersedes BS 5493: 1977; |
|
BSI BS EN ISO 10441 |
Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — Special-purpose applications |
|
BSI BS EN 14112 |
Fat and oil derivatives Fatty Acid Methyl Esters (FAME) Determination of oxidation stability (accelerated oxidation test) |
|
BSI BS EN ISO 10715 |
Natural Gas - Sampling Guidelines-AMD 12077: March 2001; CORR 16977: February 28, 2007 |
|
BSI BS ISO 13628-7 |
Petroleum and natural gas industries Design and operation of subsea production systems Part 7: Completion/workover riser systems |
|
BSI BS EN ISO 12156-1 |
Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method |
|
BSI BS EN ISO 19901-4 |
Petroleum and natural gas industries Specific requirements for offshore structures Part 4: Geotechnical and foundation design considerations |
|
BSI BS 3416 |
Bitumen-Based Coatings for Cold Application, Suitable for Use in Contact with Potable Water-AMD 7288: September 15, 1992; |
|
BSI BS EN ISO 4628-1 |
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system-CORR 14875: November 25, 2003; Supersedes BS 3900-H1: 1983; Also known as BS 3900-H1: 2003 |
|
BSI BS EN 589 |
Automotive fuels — LPG — Requirements and test methods-CORR 15384:September 28, 2004; CORR 17167: June 29, 2007 |
|
BSI BS EN ISO 12944-7 |
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 7: Execution and Supervision of Paintwork-Together with the Other Seven Parts of BS EN ISO 12944, it Partially Supersedes BS 5493: 1977; |
|
BSI BS EN ISO 13628-7 |
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems-AMD 16887: January 31, 2007 |
|
BSI BS EN ISO 6974-3 |
Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 3: Determination of Hydrogen, Helium, Oxygen, Nitrogen, Carbon Dioxide and Hydrocarbons up to C8 Using Two Packed Columns-AMD 13862: 7/16/2002; Renumbers BS ISO 6974-3: 2000 |
|
BSI BS 6920-2.1 |
Suitability of Non-Metallic Products for Use in Contact with Water Intended for Human Consumption with Regard to Their Effect on the Quality of the Water - Part 2: Methods of Test - Section 2.1: Samples for Testing-AMD 12084:October 29,2001; AMD 14718: January 21, 2004 |
|
BSI BS EN ISO 12944-6 |
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 6: Laboratory Performance Test Methods-Together with the Other Seven Parts of BS EN ISO 12944, it Partially Supersedes BS 5493: 1977; |
|
BSI BS EN ISO 12944-8 |
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 8: Development of Specifications for New Work and Maintenance-Together with the Other Seven Parts of BS EN ISO 12944, it Partially Supersedes BS 5493: 1977; |
|
BSI BS 6920-2.2.1 |
Suitability of Non-Metallic Products for Use in Contact with Water Intended for Human Consumption with Regard to Their Effect on the Quality of the Water - Part 2: Methods of Test - Section 2.2: Odour and Flavour of Water - Sub-Section 2.2.1: General Method of Test-AMD 14719: January 21, 2004 |
|
BSI BS EN 14175-2 |
Fume cupboards Part 2: Safety and performance requirements-AMD 17040: April 30, 2007 |
|
BSI BS EN 15154-1 |
Emergency safety showers Part 1: Plumbed-in body showers for laboratories |
|
BSI BS EN 14103 |
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of ester and linolenic acid methyl ester contents |
|
BSI BS EN ISO 4628-2 |
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering-CORR 14876: November 25, 2003; Supersedes BS 3900-H2: 1983; Also known as BS 3900-H2: 2003 |
|
BSI BS EN ISO 13628-10 |
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe-Amd 16775: December 29, 2006 |
|
BSI BS 6920-2.2.2 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water Part 2: Methods of test Section 2.2: Odour and flavour of water Sub-section 2.2.2: Method of testing odours and flavours imparted to water by hoses and composite pipes and tubes-CORR 14418: August 4, 2003; |
|
BSI BS EN ISO 21647 |
Medical electrical equipment Particular requirements for the basic safety and essential performance of respiratory gas monitors-CORR 16264: August 2006; Supersedes BS EN 12598:1999, BS EN 864:1997 and BS EN ISO 11196:1997 |
|
BSI BS EN ISO 6974-1 |
Natural gas Determination of composition with defined uncertainty by gas chromatography Part 1: Guidelines for tailored analysis-AMD 13845: May 10, 2002; Renumbers BS ISO 6974-1:2000 |
|
BSI BS EN ISO 13628-9 |
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 9: Remotely operated tool (ROT) intervention systems-AMD 16908: February 28, 2007 |
|
BSI BS EN ISO 15663-1 |
Petroleum and natural gas industries — Life cycle costing — Part 1: Methodology-AMD 16902: February 28, 2007 |
|
BSI BS 4250 |
Commercial Butane and Commercial Propane-Supersedes BS 4250: Part 1: 1995; |
|
BSI BS EN 14105 |
Fat and oil derivatives Fatty Acid Methyl Esters (FAME) Determination of free and total glycerol and mono-, di-, triglyceride contents (Reference method) |
|
BSI BS EN 60282-1 |
High-voltage fuses Part 1: Current-limiting fuses |
|
BSI BS EN ISO 22000 |
Food safety management systems Requirements for any organization in the food chain |
|
BSI BS 6920-2.2.3 |
Suitability of Non-Metallic Products for Use in Contact with Water Intended for Human Consumption with Regard to Their Effect on the Quality of the Water - Part 2: Methods of Test - Section 2.2: Odour and Flavour of Water - Sub-Section 2.2.3: Method of Testing Odours and Flavours Imparted to Water by Hoses for Conveying Water for Food and Drink Preparation-AMD 14720: January 21,2004 |
|
BSI BS EN ISO 16708 |
Petroleum and natural gas industries — Pipeline transportation systems — Reliability-based limit state methods |
|
BSI BS EN 14331 |
Liquid petroleum products Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates Liquid chromatography (LC)/gas chromatography (GC) method |
|
BSI BS 6920-3 |
Suitability of Non-Metallic Products for Use in Contact with Water Intended for Human Consumption with Regard to Their Effect on the Quality of the Water - Part 3: High Temperature Tests |
|
BSI BS EN ISO 19903 |
Petroleum and natural gas industries — Fixed concrete offshore structures-AMD 16926: March 30, 2007 |
|
BSI BS 6920-2.5 |
Suitability of Non-Metallic Products for Use in Contact with Water Intended for Human Consumption with Regard to Their Effect on the Quality of the Water Part 2: Methods of Test - Section 2.5: The Extraction of Substances that May be of Concern to Public Health-AMD 14721: January 21, 2004 |
|
BSI BS EN 15154-2 |
Emergency safety showers Part 2: Plumbed-in eye wash units |
|
BSI BS EN ISO 6974-2 |
Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 2: Measuring-System Characteristics and Statistics for Processing of Data-AMD 13855: 7/15/2002; Renumbers BS ISO 6974-2: 2001 |
|
BSI BS 3900-F4 |
Methods of test for paints Part F4: Resistance to continuous salt spray-AMD 1620: November 1974 |
|
BSI BS EN ISO 19901-7 |
Petroleum and natural gas industries Specific requirements for offshore structures Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units-AMD 16988: March 30, 2007 |
|
BSI BS EN ISO 3696 |
Water for Analytical Laboratory Use - Specification and Test Methods (AMD 8807) September 15, 1995 (Formerly BS 3978: 1987, Replaces BS 3978: 1966) (W)-Amd 1; |
|
BSI BS 6150 |
Painting of buildings – Code of practice |
|
BSI BS EN ISO 4628-5 |
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 5: Assessment of degree of flaking-CORR 14878: November 25, 2003; Supersedes BS 3900-H5:1983; Also Known as BS 3900-H5:2003 |
|
BSI BS 6920-2.4 |
Suitability of Non-Metallic Products for Use in Contact with Water Intended for Human Consumption with Regard to Their Effect on the Quality of the Water Part 2: Methods of Test Section 2.4: Growth of Aquatic Microorganisms Test |
|
BSI BS 489 |
Specification for Turbine Lubricants |
|
BSI BS 6008 |
Preparation of a Liquor of Tea for Use in Sensory Tests |
|
BSI BS 6920-2.6 |
Suitability of Non-Metallic Products for Use in Contact with Water Intended for Human Consumption with Regard to Their Effect on the Quality of the Water Part 2: Methods of Test Section 2.6: The Extraction of Metals-AMD 14722: January 21, 2004 |
|
BSI BS EN ISO 19904-1 |
Petroleum and natural gas industries — Floating offshore structures — Part 1: Monohulls, semi-submersibles and spars-AMD 16927: March 30, 2007 |
|
BSI BS EN ISO 13679 |
Petroleum and natural gas industries — Procedures for testing casing and tubing connections-AMD 16774: December 29, 2006 |
|
BSI BS EN ISO 4628-4 |
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking-CORR 14874: November 25, 2003; Supersedes BS 3900-H4:1983; Also Known As BS 3900-H4:2003 |
|
BSI BS EN ISO 6974-5 |
Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 5: Determination of Nitrogen, Carbon Dioxide and C1 to C5 and C6+ Hydrocarbons for a Laboratory and On-Line Process Application Using Three Columns-AMD 13863: 7/15/2002; Renumbers BS ISO 6974-5: 2000 |
|
BSI BS EN 437 |
Test gases Test pressures Appliance categories |
|
BSI BS EN ISO 6974-4 |
Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 4: Determination of Nitrogen, Carbon Dioxide and C1 to C5 and C6+ Hydrocarbons for a Laboratory and On-line Measuring System Using Two Columns-AMD 13838: 7/15/2002; Renumbers BS ISO 6974-4: 2000 |
|
BSI BS EN ISO 19739 |
Natural gas — Determination of sulfur compounds using gas chromatography-AMD 16788, December 29, 2006 |
|
BSI BS 1427 |
Field and On-Site Test Methods for the Analysis of Waters-CORR 14851: January 5, 2004; |
|
BSI BS EN ISO 13710 |
Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps |
|
BSI BS EN ISO 15711 |
Paints and varnishes Determination of resistance to cathodic disbonding of coatings exposed to sea water |
|
BSI BS EN 14175-1 |
Fume cupboards Part 1: Vocabulary-AMD 17039: April 30, 2007 |
|
BSI BS EN ISO 18453 |
Natural gas Correlation between water content and water dew point |
|
BSI BS ISO 13628-10 |
Petroleum and natural gas industries Design and operation of subsea production systems Part 10: Specification for bonded flexible pipe |
|
BSI BS EN 13201-3 |
Road lighting Part 3: Calculation of performance-CORR 15882: January 11, 2006 |
|
BSI BS 6920-2.3 |
Suitability of Non-Metallic Products for Use in Contact with Water Intended for Human Consumption with Regard to Their Effect on the Quality of the Water Part 2: Methods of Test Section 2.3: Appearance of Water |
|
BSI BS EN 1348 |
Adhesives for Tiles - Determination of Tensile Adhesion Strength for Cementitious Adhesives |
|
BSI BS EN ISO 6743-4 |
Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems)-AMD 14102: December 11, 2002; Renumbers BS ISO 6743-4: 1999; Supersedes BS 6413-4: 1982; |
|
BSI BS 3900-F2 |
Methods of Test for Paints Group F: Durability Tests on Paint Films Part F2: Determination of Resistance to Humidity Under Condensation Conditions-Amd 1; |
|
BSI BS EN 14111 |
Fat and oil derivatives Fatty Acid Methyl Esters (FAME) Determination of iodine value |
|
BSI BS EN ISO 8754 |
CORR 1 Methods of Test for Petroleum and Its Products - BS 2000-336: Petroleum Products - Determination of Sulfur Content - Energy - Dispersive X-Ray Fluorescence Spectrometry-CORR 14812: October 27, 2003; Also Known as BS 2000-336 |
|
BSI BS 1203 |
Hot-Setting Phenolic and Aminoplastic Wood Adhesives - Classification and Test Methods |
|
BSI BS EN ISO 12213-1 |
Natural gas Calculation of compression factor Part 1: Introduction and guidelines-AMD 16146: March 17,2006;: 1997 |
|
BSI BS 3900 PART 0 |
Methods of Test for Paints Part 0: General Introduction (AMD 6911) February 28, 1992 (W)-Amd 1; |
|
BSI BS EN 14110 |
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of methanol content |
|
BSI BS EN ISO 13535 |
Petroleum and Natural Gas Industries - Drilling and Production Equipment - Hoisting Equipment-CORR 13996: July 15, 2002 |
|
BSI BS EN 14109 |
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of potassium content by atomic absorption spectrometry |
|
BSI BS 3900-C1 |
Methods of Test for Paints - Part C1: Wet edge time-AMD 6807: November 1991; |
|
BSI BS EN ISO 4320 |
Non-Ionic Surface Active Agents - Determination of Cloud Point Index Volumetric Method-Supersedes BS 6829: Section 4.4: 1989; ISO 4320: 1977; |
|
BSI BS EN ISO 4628-6 |
Paints and varnishes Evaluation of degradation of paint coatings Designation of intensity, quantity and size of common types of defect Part 6: Rating of degree of chalking by tape method-AMD 14123: January 21, 2003; Renumbers BS 3900-H6: 1991; |
|
BSI BS 2015 |
Paint and Related Terms (AMD 9341) November 15, 1996 (W)-Amd 1; |
|
BSI BS EN 12546-1 |
Materials and Articles in Contact with Foodstuffs - Insulated Containers for Domestic Use - Part 1: Specification for Vacuum Ware, Insulated Flasks and Jugs-CORR 15686: March 2006; Supersedes BS 6672 Part 1 |
|
BSI BS EN 14104 |
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of acid value |
|
BSI BS EN ISO 1519 |
Paints and Varnishes - Bend Test (Cylindrical Mandrel)-CORR 13931: May 17, 2002; Also Known as BS 3900-E1: 2002 |
|
BSI BS ISO 12213-2 |
Natural Gas - Calculation of Compression Factor Part 2: Calculation Using a Molar Composition Analysis |
|
BSI BS 245 |
Mineral Solvents (White Spirit and Related Hydrocarbon Solvents) for Paints and Other Purposes |
|
BSI BS EN 14108 |
Fat and oil derivatives Fatty Acid Methyl Esters (FAME) Determination of sodium content by atomic absorption spectrometry |
|
BSI BS 3900-F11 |
Methods of test for paints Determination of resistance to cathodic disbonding of coatings for use on land-based buried structures-Cathodic disbonding (land-based); |
|
BSI BS EN ISO 2431 |
Paints and Varnishes - Determination of Flow Time by Use of Flow Cups-CORR 10889:February 19, 2002; Supersedes BS EN 535: 1991; Also Known as BS 3900-A6:1996 |
|
BSI BS EN ISO 8442-2 |
Materials and articles in contact with foodstuffs Cutlery and table holloware Part 2: Requirements for stainless steel and silver-plated cutlery-AMD 10200: January 1999; AMD 10647: January 2000; CORR 16518: August 2006;:1984 |
|
BSI BS ISO 8007-3 |
Carbonaceous materials used in the production of aluminium Sampling plans and sampling from individual units Part 3: Sidewall blocks |
|
BSI BS 4366 |
Industrial Nitrogen |
|
BSI BS 684-1.14 |
Methods of Analysis of Fats and Fatty Oils - Part 1: Physical Methods - Section 1.14: Determination of Lovibond Colour-ISO 15305: 1998; |
|
BSI BS EN 1377 |
Foodstuffs - Determination of Acesulfame K in Table Top Sweetner Preparations - Spectrometric Method |
|
BSI BS EN ISO 13533 |
Petroleum and natural gas industries Drilling and production equipment Drill-through equipment-CORR 14176:October 17, 2002; CORR 16372:August 2006 |
|
BSI BS 6920-4 |
Suitability of Non-Metallic Products for Use in Contact with Water Intended for Human Consumption with Regard to Their Effect on the Quality of the Water - Part 4: Method for the GCMS Identification of Water Leachable Organic Substances |
|
BSI BS EN 12546-3 |
Materials and Articles in Contact with Foodstuffs - Insulated Containers for Domestic Use - Part 3: Specification for Thermal Packs-Supersedes BS 6671: 1986 which is Withdrawn; |
|
BSI BS EN ISO 21329 |
Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors |
|
BSI BS ISO 12156-2 |
Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 2: Limit |
|
BSI BS 3900 PART G6 |
Methods of Test for Paints Group G: Environmental Tests on Paint Films (Including Tests for Resistance to Corrosion and Chemicals) Part G6: Assessment of Resistance to Fungal Growth (Read in Conjunction with BS 3900: Part 0) |
|
BSI BS EN 14107 |
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry |
|
BSI BS EN ISO 6978-2 |
Natural gas Determination of mercury Part 2: Sampling of mercury by amalgamation on gold/platinum alloy-AMD 16345: July 2006,:2003; Together with BS ISO 6978-1 and -3, it supersedes BS 7678:1993 |
|
BSI BS 6376 PART 3 |
Reagents for Chemical Analysis Part 3: Second Series |
|
BSI BS EN ISO 13443 |
Natural Gas - Standard Reference Conditions-AMD 16149: March 2006; Renumbers BS ISO 13443:1997 |
|
BSI BS EN ISO 1514 |
Paints and varnishes Standard panels for testing-Also Known as BS 3900-A3:2004 |
|
BSI BS 7800 |
Automotive Fuel - High Octane (Super) Unleaded Petrol - Specification-CORR 16679:September 2006 |
|
BSI BS ISO 13357-2 |
Petroleum products Determination of the filterability of lubricating oils Part 2: Procedure for dry oils-CORR 16145: January 2006;:1999 |
|
BSI BS ISO 6974-6 |
Natural gas Determination of composition with defined uncertainty by gas chromatography Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns |
|
BSI BS 1070 |
Black Paint (Tar-Based) (W) |
|
BSI BS EN 12878 |
Pigments for the colouring of building materials based on cement and/or lime Specifications and methods of test |
|
BSI BS EN ISO 10427-1 |
Petroleum and natural gas industries Casing centralizers Part 1: Bow-spring casing centralizers-CORR 14173: October 15, 2002 |
|
BSI BS EN ISO 5508 |
Animal and Vegetable Fats and Oils - Analysis by Gas Chromatography of Methyl Esters of Fatty Acids-AMD 8672: July 15,1995; Renumbers BS 627-2.35:1990; Supersedes 684-2-35:1980 |
|
BSI BS ISO 15741 |
Paints and Varnishes - Friction-Reduction Coatings for the Interior of On- and Offshore Steel Pipelines for Non-Corrosive Gases |
|
BSI BS 3900 PART E3 |
Methods of Test for Paints Part E3: Impact (Falling Weight) Resistance (AMD 6907) February 28, 1992 (W)-Amd 1; |
|
BSI BS EN ISO 1513 |
Paints and Varnishes - Examination and Preparation of Samples for Testing Also Numbered BS 3900: Part A2: 1993 Replaces BS 3900: Part A2:1983) (W)-Amd 8331: February 1995 |
|
BSI BS 3900-J3 |
Methods of Test for Paints Part J3: Determination of Gel Time of Coating Powders-ISO 8130-6: 1992 and Amendment 1:1998; |
|
BSI BS EN ISO 4628-8 |
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 8: Assessment of degree of delamination and corrosion around a scribe-Also known as BS 3900-H8:2005 |
|
BSI BS 3900 PART F10 |
Methods of Test for Paints Group F: Durability Tests on Paint Films Part F10: Determination of Resistance to Cathodic Disbonding of Coatings for Use in Marine Environments |
|
BSI BS ISO 15380 |
Lubricants, Industrial Oils and Related Products (Class L) - Family H (Hydraulic Systems) - Specifications for Categories HETG, HEPG, HEES and HEPR |
|
BSI BS 144 |
Coal Tar Creosote for Wood Preservation-AMD 9947; April 1998; |
|
BSI BS EN 12546-2 |
Materials and Articles in Contact with Foodstuffs - Insulated Containers for Domestic Use - Part 2: Specification for Insulated Bags and Boxes |
|
BSI BS EN 12697-6 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens |
|
BSI BS EN ISO 12213-3 |
Natural gas Calculation of compression factor Part 3: Calculation using physical properties-AMD 16148: Febuary 2006;:1997 |
|
BSI BS EN ISO 15136-2 |
Petroleum and natural gas industries Progressing cavity pumps systems for artificial lift Part 2: Surface drive systems |
|
BSI BS EN ISO 2813 |
Paints and Varnishes - Determination of Specular Gloss of Non-Metallic Paint Films at 20 Degrees, 60 Degrees and 85 Degrees-AMD 10590: 3/2000; Renumbers BS 3900-D5: 1997 |
|
BSI BS ISO 19739 |
Natural gas Determination of sulfur compounds using gas chromatography |
|
BSI BS EN 12215 |
Coating plants Spray booths for application of organic liquid coating materials Safety requirements |
|
BSI BS ISO 6743-3 |
Lubricants, industrial oils and related products (class L) Classification Part 3: Family D (Compressors)-Supersedes BS 6413-3.1:1998 and BS 6413-3.2:1989 |
|
BSI BS 3900-F5 |
Methods of test for paints Part F5: Determination of light fastness of paints for interior use exposed to artificial light sources-Light Fastness; |
|
BSI BS 6376 PART 2 |
Reagents for Chemical Analysis Part 2: Specifications (First Series)-Amd 1; |
|
BSI BS 684-2.14 |
Methods of Analysis of Fats and Fatty Oils - Part 2.14: Other Methods - Determination of Peroxide Value-ISO 3960: 2001; |
|
BSI BS 6949 |
Bitumen-Based Coatings for Cold Application, Excluding Use in Contact with Potable Water-AMD 7287: September 15,1992 |
|
BSI BS EN 14106 |
Fat and oil derivatives Fatty Acid Methyl Esters (FAME) Determination of free glycerol content |
|
BSI BS EN ISO 18274 |
Welding consumables — Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys — Classification-CORR 16156: August 2006; CORR 16567: August 2006; CORR 17043: April 30, 2007 |
|
BSI BS ISO 11158 |
Lubricants, Industrial Oils and Related Products (Class L) - Family H (Hydraulic Systems) - Specifications for Categories HH, HL, HM, HV and HG |
|
BSI BS 6580 |
Corrosion Inhibiting, Engine Coolant Concentrate ('Antifreeze') (AMD 7987) November 15, 1993 (W)-Amd 1; |
|
BSI BS EN ISO 4618 |
Paints and varnishes Terms and definitions-Supersedes BS EN 971-1:1996, BS EN ISO 4618-2:2000 and BS EN ISO 4618-3:2000 |
|
BSI BS 3900 PART E7 |
Methods of Test for Paints Part E7: Resistance to Impact (Falling Ball Test) (AMD 6909) February 28, 1992 (W)-Amd 2; |
|
BSI BS 3900-A10 |
Methods of Test for Paints Group A10: Determination of Percentage Volume of Non-Volatile Matter by Measurement of the Density of a Dried Coating-ISO 3233; 1998; |
|
BSI BS EN 1040 |
Chemical disinfectants and antiseptics — Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antiseptics — Test method and requirements (phase 1) |
|
BSI BS EN ISO 10426-1 |
Petroleum and Natural Gas Industries - Cements and Materials for Well Cementing - Part 1: Specification |
|
BSI BS 4130 |
Specification for Sodium hydroxide (technical grades)-AMD 7671: April 1993 |
|
BSI BS EN ISO 13734 |
Natural Gas - Organic Sulfur Compounds Used as Odorants - Requirements and Test Methods-AMD 10888: 2/2001; Renumbers BS ISO 13734:1998; |
|
BSI BS EN ISO 4628-10 |
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 10: Assessment of degree of filiform corrosion-CORR 14870: November 24, 2003; Also known as BS 3900-H10:2003 |
|
BSI BS ISO 5024 |
Petroleum Liquids and Liquefied Petroleum Gases - Measurement - Standard Reference Conditions-ISO 5024:1999; |
|
BSI BS 1282 |
Wood Preservatives - Guidance on Choice, Use and Application |
|
BSI BS 3900-J13 |
Methods of Test for Paints - Group J: Testing of Coating Powders - Part J13: Particle Size Analysis by Laser Diffraction-ISO 8130-13:2001; |
|
BSI BS 4364 |
Industrial Oxygen |
|
BSI BS EN 1101 |
Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the ignitability of vertically oriented specimens (small flame)-AMD 16142: May 31, 2006 |
|
BSI BS EN ISO 12543-6 |
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 6: Appearance |
|
BSI BS EN ISO 2812-2 |
Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method |
|
BSI BS EN ISO 4263-1 |
Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 1: Procedure for mineral oils |
|
BSI BS ISO 23874 |
Natural gas — Gas chromatographic requirements for hydrocarbon dewpoint calculation |
|
BSI BS EN ISO 12543-2 |
Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass |
|
BSI BS 3900-E19 |
Methods of Test for Paints - Part E19: Determination of Film Hardness by Pencil Test-ISO 15184: 1998; |
|
BSI BS 509 PART 1 |
Acetone for Industrial Use Part 1: Acetone |
|
BSI BS EN 14678-1 |
LPG equipment and accessories Construction and performance of LPG equipment for automotive filling stations Part 1: Dispensers |
|
BSI BS EN ISO 12543-3 |
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 3: Laminated Glass |
|
BSI BS EN ISO 4628-7 |
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 7: Assessment of degree of chalking by velvet method-CORR 14869: November 24, 2003; Also Known As BS 3900-H7:2003 |
|
BSI BS EN ISO 5509 |
Animal and Vegetable Fats and Oils - Preparation of Methyl Esters of Fatty Acids-Supersedes BS 684-2.34: 1980; Also Known as BS 684-2.34: 2001 |
|
BSI BS 2523 |
Lead-Based Priming Paints-AMD 3941: May 15, 1982; Formerly BS 2521 & 2523: 1966; Replaces BS 2521: 1954, BS 2522: 1954, BS 2523: 1954, BS 2524: 1954; Partially replaced by BS 5082: 1974 and BS 5358: 1976; |
|
BSI BS 3900 PART J8 |
Methods of Test for Paints Part J8: Calculation of Lower Explosion Limit of Coating Powders (ISO 8130-4: 1992) (W) |
|
BSI BS 3900-J12 |
Methods of Test for Paints - Part J12: Determination of Compatibility of Coating Powders-ISO 8130-12: 1998; |
|
BSI BS 7340 |
Schedule for Compressibility Factors for Petroleum Hydrocarbons in the Density Range 638kg/m3 to 1074 kg/m3-ISO 9770: 1989; |
|
BSI BS EN 143 |
Respiratory protective devices Particle filters Requirements, testing, marking-CORR 14049: December 16, 2002; CORR 15725: August 2006; AMD 16500: July 31, 2006 |
|
BSI BS EN ISO 13500 |
Petroleum and natural gas industries Drilling fluid materials Specifications and tests |
|
BSI BS EN ISO 6270-1 |
Paints and Varnishes - Determination of Resistance to Humidity - Part 1: Continous Condensation-CORR 13641:January 18,2002; Supersedes BS EN ISO 6270:1995; Also Known as BS 3900-F9:2001 |
|
BSI BS ISO 7507-3 |
Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 3: Optical-triangulation method |
|
BSI BS 2626 |
Lubricants for Refrigerant Compressors |
|
BSI BS 3900 PART A5 |
Paints Part A5: Large-Scale Brushing Tests for Paints and Varnishes (Read in Conjunction with BS 3900: Part 0) |
|
BSI BS EN 1346 |
Adhesives for Tiles - Determination of Open Time |
|
BSI BS EN 302-1 |
Adhesives for load-bearing timber structures Test methods Part 1: Determination of bond strength in longitudinal tensile shear strength |
|
BSI BS EN ISO 20763 |
Petroleum and related products Determination of anti-wear properties of hydraulic fluids Vane pump method-CORR 16012: January 19, 2006; Supersedes BS 2000-281:1993 |
|
BSI BS EN ISO 8442-5 |
Materials and articles in contact with foodstuffs Cutlery and holloware Part 5: Specification for sharpness and edge retention test of cutlery |
|
BSI BS 1016-7 |
Methods for Analysis and Testing of Coal and Coke Part 7: Ultimate Analysis of Coke-AMD 7690; May 15, 1993; Partially Replaced by BS 1016: Subsection 106.4.1: 1993; |
|
BSI BS 3900 PART J2 |
Methods of Test for Paints Part J2: Determination of Particle Size Distribution of Coating Powders by Sieving (ISO 8130-1: 1992) (W) |
|
BSI BS 3900-D11 |
Methods of Test for Paints - Group D11: Determination of Contrast Ratio (Opacity) of Light-Coloured Paints at a Fixed Spreading Rate-ISO 6504-3: 1998; |
|
BSI BS 5309 PART 1 |
Methods for Sampling Chemical Products Part 1: Introduction and General Principles |
|
BSI BS 5309 PART 2 |
Methods for Sampling Chemical Products Part 2: Sampling of Gases |
|
BSI BS 6380 |
Guide to Low Temperature Properties and Cold Weather Use of Diesel Fuels and Gas Oils Conforming to BS EN 590 and Classes A2 and D of BS 2869 |
|
BSI BS EN 1014-2 |
Wood Preservatives - Creosote and Creosoted Timber - Methods of Sampling and Analysis Part 2: Procedure for Obtaining a Sample of Creosote from Creosoted Timber for Subsequent Analysis |
|
BSI BS EN 14175-3 |
Fume cupboards — Part 3: Type test methods |
|
BSI BS EN 302-4 |
Adhesive for load-bearing timber structures Test methods Part 4: Determination of the effects of wood shrinkage on the shear strength |
|
BSI BS 3900-D6 |
Methods of test for paints Part D6: Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate, using polyester film-Including Amendment No. 1; |
|
BSI BS EN ISO 10101-1 |
Natural Gas - Determination of Water by the Karl Fischer Method - Part 1: Introduction-AMD 10051: July 1998; Renumbers BS 3156: Subsection 11.3.1: 1994 |
|
BSI BS EN ISO 12543-5 |
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 5: Dimensions and Edge Finishing |
|
BSI BS EN ISO 14111 |
Natural Gas - Guidelines to Traceability in Analysis-AMD 10655: December 1999; Renumbers BS 3156-11.0.3:1997; Also Known as BS 3156-11.0.3:1999 |
|
BSI BS EN ISO 4267-2 |
Petroleum and Liquid Petroleum Products - Calculation of Oil Quantities Part 2: Dynamic Measurements (AMD 8896) March 15, 1996 (W)-Amd 1; |
|
BSI BS 1017-2 |
Sampling of Coal and Coke Part 2: Methods for Sampling of Coke (W)-Superseded by BS ISO 13909-1 to 8 |
|
BSI BS 3900 PART J5 |
Methods of Test for Paints Part J5: Determination of Loss of Mass of Coating Powders on Heating (ISO 8130-7: 1992) (W) |
|
BSI BS 5350-C5 |
Methods of Test for Adhesives - Determination of Bond Strength in Longitudinal Shear for Rigid Adherends |
|
BSI BS EN 1323 |
Adhesives for Titles - Concrete Slab for Test |
|
BSI BS EN ISO 10156-2 |
Gas cylinders Gases and gas mixtures Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures |
|
BSI BS EN ISO 2815 |
Paints and varnishes Buchholz indentation test-Supersedes BS 3900-E9: 1998; Also Known as BS 3900-E9: 2003 |
|
BSI BS 3900-E12.1 |
Methods of Test for Paints - Part E12.1: Determination of Knoop Hardness by Measurement of the Indentation Length Using a Microscope-ISO 6441-1: 1999; |
|
BSI BS 4764 |
Powder Cement Paints |
|
BSI BS EN 1650 |
Chemical Disinfectants and Antiseptics - Quantitative Suspension Test for the Evaluation of Fungicidal Activity of Chemical Disinfectants and Antiseptics Used in Food, Industrial, Domestic and Institutional Areas - Test Method and Requirements (Phase 2, Step 1)-CORR 13800: September 17, 2002; Together with BS EN 1276: 1997 it Supersedes DD 177: 1988; |
|
BSI BS EN 1939 |
Self adhesive tapes Determination of peel adhesion properties |
|
BSI BS EN ISO 12543-1 |
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 1: Definitions and Description of Component Parts |
|
BSI BS EN ISO 591-1 |
Titanium Dioxide Pigments for Paints - Part 1: Specifications and Methods of Test-CORR 13423: October 5,2001; Supersedes BS 1851:1978; |
|
BSI BS EN ISO 6860 |
Paints and varnishes — Bend test (conical mandrel) |
|
BSI BS ISO 12917-1 |
Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 1: Manual methods |
|
BSI BS 3900 PART J11 |
Methods of Test for Paints Part J11: Determination of Flow of Coating Powders (Inclined-Plane Method)-ISO 8130-11: 1997 |
|
BSI BS 3900 PART J7 |
Methods of Test for Paints Part J7: Determination of Density of Coating Powders by Liquid Displacement Pyknometer (ISO 8130-3: 1992) (W) |
|
BSI BS 3900-J10 |
Methods of Test for Paints - Part J10: Determination of Deposition Effiency of Coating Powders-ISO 8130-10: 1998; |
|
BSI BS 4040 |
Leaded Petrol (Gasoline) for Motor Vehicles |
|
BSI BS 5350 PART C6 |
Methods of Test for Adhesives Group C: Adhesively Bonded Joints: Mechanical Tests Part 6: Determination of Bond Strength in Direct Tension in Sandwich Panels |
|
BSI BS EN 1134 |
Method for Determination of Sodium, Potassium, Calcium and Magnesium Contents of Fruit and Vegetable Juices by Atomic Absorption Spectrometry (W) |
|
BSI BS EN 204 |
Classification of Thermoplastic Wood Adhesives for Non-Structural Applications |
|
BSI BS EN ISO 13686 |
Natural gas Quality designation-AMD 16105: Febuary 2006;:1998 |
|
BSI BS EN ISO 6143 |
Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures-AMD 16904: February 28, 2007 |
|
BSI BS ISO 4268 |
Petroleum and Liquid Petroleum Products - Temperature Measurements - Manual Methods-ISO 4268: 2000; |
|
BSI BS ISO/TS 16922 |
Natural gas - Guidelines for odorizing gases |
|
BSI BS 318 |
Chromic Oxide Green Pigments for Paints |
|
BSI BS 3900 PART A17 |
Methods of Test for Paints Group A: Tests on Liquid Paints (Excluding Chemical Tests) Part A17: Coating of Test Panels at a Spreading Rate |
|
BSI BS 3900 PART J4 |
Methods of Test for Paints Part J4: Determination of the Storage Stability of Coating Powders (ISO 8130-8: 1994) (W) |
|
BSI BS 3900-E12.2 |
Methods of Test for Paints - Part E12.2: Determination of Knoop Hardness by Measurement of the Indentation Depth-ISO 6441-2: 1999; |
|
BSI BS 4231 |
Viscosity Grades of Industrial Liquid Lubricants (ISO 3448: 1992) |
|
BSI BS 6441 |
Petroleum Measurement Tables (ISO 91-1: 1992) |
|
BSI BS EN 14175-6 |
Fume cupboards — Part 6: Variable air volume fume cupboards |
|
BSI BS EN ISO 12543-4 |
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 4: Test Methods for Durability |
|
BSI BS EN ISO 13445 |
Adhesives Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method |
|
BSI BS EN ISO 6326-3 |
Natural Gas - Determination of Sulfur Compounds Part 3: Determination of Hydrogen Sulfide, Mercaptan Sulfur, and Carbonyl Sulfide Sulfur by Potentiometry-AMD 9993: June 1998; Renumbers BS 3156 SUB SEC 11.4.3:1994 |
|
BSI BS ISO 6743-9 |
Lubricants, industrial oils and related products (class L) Classification Part 9: Family X (Greases)-Supersedes BS 6413-9:1988 |
|
BSI BS 1016-9 |
Methods for the Analysis and Testing of Coal and Coke Part 9: Phosphorus in Coal and Coke |
|
BSI BS 3488 |
Technical Anhydrous Lanolin (AMD 6162) February 28, 1990-Amd 1; |
|
BSI BS 3900 PART A16 |
Methods of Test for Paints Group A: Tests on Liquid Paints (Excluding Chemical Tests) Part A16: Determination of Natural Spreading Rate by Brush Application |
|
BSI BS 3900 PART B8 |
Methods of Test for Paints Group B: Tests Involving Chemical Examination of Liquid Paints and Dried Paint Films Part B8: Determination of 'Soluble' Barium Content |
|
BSI BS 3900 PART C9 |
Methods of Test for Paints Group C: Tests Associated with Paint Film Formation Part C9: Methods for Evaluation of the Compatibility of a Product with a Surface to Be Painted |
|
BSI BS 3900 PART J9 |
Methods of Test for Paints Part J9: Determination of Flow Properties of a Coating Powder/Air Mixture (ISO 8130-5: 1992) (W) |
|
BSI BS 684 SEC 0.1 |
Methods of Analysis of Fats and Fatty Oils Part 0: General Introduction Section 0.1: General Procedures and List of Determinations in BS 684 (W) |
|
BSI BS EN 12945 |
Liming materials Determination of neutralizing value Titrimetric methods |
|
BSI BS EN 1465 |
Adhesives - Determination of Tensile Lap-Shear Strength of Rigid-to- Rigid Bonded Assemblies (W) |
|
BSI BS EN ISO 10101-2 |
Natural Gas - Determination of Water by the Karl Fischer Method - Part 2: Titration Procedure-AMD 10052: July 1998; Renumbers BS 3156: Subsection 11.3.2: 1994 |
|
BSI BS EN ISO 6142 |
Gas analysis — Preparation of calibration gas mixtures — Gravimetric method-AMD 16906: February 28, 2007 |
|
BSI BS ISO 14912 |
Gas analysis — Conversion of gas mixture composition data-CORR 17150: June 29, 2007 |
|
BSI BS ISO 4587 |
Adhesives Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies |
|
BSI BS 1016-108.4 |
Methods for Analysis and Testing of Coal and Coke Part 108: Tests Special to Coke Section 108.4: Determination of Bulk Density (Large Container) (ISO 1013: 1995) (W) |
|
BSI BS 1595-1 |
Propan-2-Ol (Isopropyl Alcohol) for Industrial Use Part 1: Propan-2-01 (Isopropyl Alcohol) |
|
BSI BS 3761 |
Solvent-Based Paint Remover (W) |
|
BSI BS 3900 PART A9 |
Methods of Test for Paints Group A: Tests on Liquid Paints (Excluding Chemical Tests) Part A9: Determination of Flashpoint (Closed Cup Equilibrium Method)-Also Known as BS 6664-2: 1986; ISO 1523:1983 |
|
BSI BS 3900 PART D9 |
Methods of Test for Paints Group D: Optical Tests on Paint Films Part D9: Determination of Colour and Colour Difference Measurement |
|
BSI BS 4072 |
Copper/Chromium/Arsenic Preparations for Wood Preservation |
|
BSI BS 4404 |
Determination of Arsenic (Silver Diethyldithiocarbamate Procedure) |
|
BSI BS 753 |
Density-Composition Tables for Aqueous Solutions of Sulphuric Acid |
|
BSI BS EN 13697 |
Chemical Disinfectants and Antiseptics - Quantitative Non-Porous Surface Test for the Evaluation of Bactericidal and/or Fungicidal Activity of Chemical Disinfectants Used in Food, Industrial, Domestic and Institutional Areas - Test Method and Requirements without Mechanical Action (Phase 2/Step 2) |
|
BSI BS EN 1776 |
Gas Supply - Natural Gas Measuring Stations - Functional Requirements |
|
BSI BS EN 1860-2 |
Appliances, solid fuels and firelighters for barbecueing - Part 2: Barbecue charcoal and barbecue charcoal briquettes - Requirements and test methods |
|
BSI BS EN ISO 16276-2 |
Corrosion protection of steel structures by protective paint systems — Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating — Part 2: Cross-cut testing and X-cut testing |
|
BSI BS EN ISO 2814 |
Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour |
|
BSI BS EN ISO 3251 |
Paints, varnishes and plastics Determination of non-volatile-matter content-Supersedes BS EN ISO 3251: 1995, BS EN ISO 8618:1998 and BS ISO 1625:1998; Also known as BS 8900-B18:2003 |
|
BSI BS EN ISO 4630-1 |
Clear liquids Estimation of colour by the Gardner colour scale Part 1: Visual method-Supersedes BS 6782-5:1997; Also known as BS 6782-5.1:2004 |
|
BSI BS EN ISO 5378 |
Starches and Derived Products - Determination of Nitrogen Content by the Kjeldahl Method - Spectrometric Method (W) |
|
BSI BS ISO 13357-1 |
Petroleum products Determination of the filterability of lubricating oils Part 1: Procedure for oils in the presence of water |
|
BSI BS ISO 13740 |
Crude Petroleum and Petroleum Products - Transfer Accountability - Assessment of Vessel Experience Factor on Loading (VEFL) and Vessel Experience Factor on Discharging (VEFD) of Ocean-Going Tanker Vessels |
|
BSI BS ISO 17194 |
Structural adhesives — A standard database of properties |
|
BSI BS ISO 8005 |
Carbonaceous materials used in the production of aluminium Green and calcined coke Determination of ash content-ISO 8005:2005; Supersedes BS 6043-2-2:1985 |
|
BSI BS 1016-100 |
Methods for Analysis and Testing of Coal and Coke Part 100: General Introduction and Methods for Reporting Results |
|
BSI BS 1017-1 |
Sampling of Coal and Coke Part 1: Methods for Sampling of Coal-Partially superseded by BS ISO 13909-1 and BS ISO 13909-3 thru 13909-8 |
|
BSI BS 2690-116 |
Methods of testing Water used in industry Part 116: Morpholine: spectrophotometric method |
|
BSI BS 3900 PART B3 |
Group B: Tests Involving Chemical Examination of Liquid Paints and Dried Paint Films: Part B3: Determination of 'Soluble' Lead in Solid Matter in Liquid Paints: Method for Use in Conjunction with the Control of Lead at Work Regulations, 1980 (S.I. 1980 No. 1248) |
|
BSI BS 3900 PART D8 |
Methods of Test for Paints Group D: Optical Tests on Paint Films Part D8: Determination of Colour and Colour Difference Principles |
|
BSI BS 507 |
Ethanol for Industrial Use |
|
BSI BS 5355 |
Filling Ratios and Developed Pressures for Liquefiable and Permanent Gases-Supersedes BS 1736: 1951; Partially superseded by BS EN 13099:2003; |
|
BSI BS EN 1014-3 |
Wood Preservatives - Creosote and Creosoted Timber - Methods of Sampling and Analysis Part 3: Determination of the Benzo[a]pyrene Content of Creosote-Supersedes DD ENV 1014-3: 1995; |
|
BSI BS EN ISO 10101-3 |
Natural Gases - Determination of Water by the Karl Fischer Method - Part 3: Coulometric Procedure-AMD 10053: July 1998; Renumbers BS 3156: Subsection 11.3.3: 1994 |
|
BSI BS EN ISO 11507 |
Paints and Varnishes - Exposure of Coatings to Artificial Weathering - Exposure to Fluorescent UV and Water-CORR 13639: January 21, 2002; Renumbers BS 3900-F16:1997; |
|
BSI BS EN ISO 13501 |
Petroleum and natural gas industries — Drilling fluids — Processing systems evaluation-AMD 16886: January 31, 2007 |
|
BSI BS EN ISO 2871-1 |
Surface Active Agents - Detergents - Determination of Cationic-Active Matter Content Part 1: High Molecular Mass Cationic-Active Matter (W) |
|
BSI BS EN ISO 7278-2 |
Liquid Hydrocarbons - Dynamic Measurement - Proving Systems for Volumetric Meters Part 2: Pipe Provers (AMD 8899) June 15, 1996 (W)-Amd 1; |
|
BSI BS ISO 12917-2 |
Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 2: Internal electro-optical distance-ranging method |