|
BSI BS ISO 8573-7 |
Compressed air Part 7: Test method for viable microbiological contaminant content |
|
BSI BS 1016-108.3 |
Methods for Analysis and Testing of Coal and Coke Part 108: Tests Special to Coke Section 108.3: Determination of Bulk Density (Small Container)-ISO 567: 1995; |
|
BSI BS 2713 |
2-Ethoxyethanol (Ethylene Glycol Monoethyl Ether) (AMD 7628) May 15, 1993 (W)-Amd 1; |
|
BSI BS 3591 |
Industrial Methylated Spirits |
|
BSI BS 3900 PART B16 |
Methods of Test for Paints Group B: Tests Involving Chemical Examination of Liquid Paints and Dried Paint Films Part B16: Determination of Total Mercury (Read in Conjunction with BS 3900: Part 0) |
|
BSI BS 3900 PART B4 |
Methods of Test for Paints Group B: Tests Involving Chemical Examination of Liquid Paints and Dried Paint Films Part B4: Determination of Total Lead in Paints and Similar Materials |
|
BSI BS 3900 PART F15 |
Methods of Test for Paints Part F15: Determination of Resistance to Humidity (Intermittent Condensation) (ISO 11503: 1995) (W) |
|
BSI BS 3900 PART J6 |
Methods of Test for Paints Part J6: Determination of Density of Coating Powders by Gas Comparison Pyknometer (Referee Method) (ISO 8130-2: 1992) (W) |
|
BSI BS 684-2.16 |
Methods of analysis of Fats and fatty oils Part 2: Other methods Section 2.16: Determination of copper colorimetric method |
|
BSI BS 684-2.47 |
Methods of Analysis of Fats and Fatty Oils - Part 2: Other Methods - Section 2.47: Determination of Benzo(a)pyrene Content by Reverse-Phase High-Performance Liquid Chromatography-ISO 15302:1998; |
|
BSI BS EN ISO 7278-1 |
Liquid Hydrocarbons - Dynamic Measurement - Proving Systems for Volumetric Meters Part 1: General Principles (AMD 8895) April 15, 1996 (W)-Amd 1; |
|
BSI BS ISO 8068 |
Lubricants, industrial oils and related products (class L) Family T (Turbines) Specification for lubricating oils for turbines |
|
BSI BS ISO/TR 9494 |
Petroleum Liquids - Automatic Pipeline Sampling - Statistical Assessment of Performance of Automatic Samplers Determining the Water Content in Hydrocarbon Liquids-ISO/TR 9494: 1997; |
|
BSI BS 1016-8 |
Methods for Analysis and Testing of Coal and Coke Part 8: Chlorine in Coal and Coke-AMD 6984; May 1, 1992; Superseded by BS 1016: Subsection 106.6.1: 1997 and BS 1016: Subsection 106.6.2; |
|
BSI BS 1336 |
Knotting |
|
BSI BS 3762 PART 0 |
Analysis of Formulated Detergents Part 0: General Introduction |
|
BSI BS 3900 PART B15 |
Methods of Test for Paints Group B: Tests Involving Chemical Examination of Liquid Paints and Dried Paint Films Part B15: Rapid Method for Estimation of Lead in Liquid Paints |
|
BSI BS 3900 PART D10 |
Methods of Test for Paints Group D: Optical Tests on Paint Films Part D10: Determination of Colour and Colour Difference: Calculation |
|
BSI BS 4267 PART 2 |
Ammonium Nitrate Part 2: Method for Determination of Total Nitrogen Content |
|
BSI BS 4401 PART 2 |
Methods of Test for Meat and Meat Products Part 2: Determination of Nitrogen Content (Reference Method) |
|
BSI BS 4401-4 |
Methods of test for Meat and meat products Part 4: Determination of total fat content-AMD 6557: December 1990; |
|
BSI BS 576 PART 2 |
Acetic Acid For Industrial Use Part 2: Methods of Test for Acetic Acid |
|
BSI BS 5763-0 |
Methods for Microbiological Examination of Food and Animal Feeding Stuffs - Part 0: General Laboratory Practices-AMD 13218: January 30, 2002; ISO 7218: 1996; |
|
BSI BS 684-1.4 |
Methods of analysis of Fats and fatty oils Part 1: Physical methods Section 1.4: Determination of flow and drop points |
|
BSI BS 7554 |
Beaded Desiccant Silica Gel-AMD 9656; September 1997; |
|
BSI BS 7873 |
Code of practice for application and testing of hot enamel external and/or internal coating of iron and steel pipes-AMD 13844: October 14, 2002; |
|
BSI BS EN 1062-7 |
Paints and varnishes Coating materials and coating systems for exterior masonry and concrete Part 7: Determination of crack bridging properties |
|
BSI BS EN 1308 |
Adhesives for Tiles - Determination of Slip |
|
BSI BS EN 14332 |
Foodstuffs Determination of trace elements Determination of arsenic in seafood by graphite furnace atomic absorption spectrometry (GFAAS) after microwave digestion |
|
BSI BS EN 1500 |
Chemical Disinfectants and Antiseptics - Hygienic Handrub - Test Method and Requirements (Phase 2/Step 2) |
|
BSI BS EN 23270 |
Temperatures and Humidities for Conditioning and Testing Paints, Varnishes and Their Raw Materials-ISO 3270: 1984; Partially Replaces BS 3900: Part 0: 1989; |
|
BSI BS EN 26922 |
Adhesives - Determination of Tensile Strength of Butt Joints (ISO 6922: 1987) (AMD 7613) August 15, 1993 (Formerly BS 5350: Part C3: 1989 Replaces BS 5350: Part C3: 1978) (W)-Amd 1; |
|
BSI BS EN 898 |
Chemicals used for treatment of water intended for human consumption Sodium hydrogen carbonate |
|
BSI BS EN ISO 10426-4 |
Petroleum and natural gas industries Cements and materials for well cementing Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure |
|
BSI BS EN ISO 10426-5 |
Petroleum and natural gas industries Cements and materials for well cementing Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure |
|
BSI BS EN ISO 11334-4 |
Walking Aids Manipulated by One Arm - Requirements and Test Methods - Part 4: Walking Sticks with Three or More Legs-BS 4922: 1990; |
|
BSI BS EN ISO 11341 |
Paints and varnishes Artificial weathering and exposure to artificial radiation Exposure to filtered xenon-arc radiation-Also known as BS 3900-F14:2004 |
|
BSI BS EN ISO 11890-2 |
Paints and Varnishes - Determination of Volatile Organic Compound (VOC) Content - Part 2: Gas-Chromatographic Method-CORR 13646: January 25, 2002; Renumbers BS 3900-A24: 2000; |
|
BSI BS EN ISO 15546 |
Petroleum and natural gas industries Aluminium alloy drill pipe |
|
BSI BS EN ISO 3248 |
Paints and Varnishes - Determination of the Effect of Heat-AMD 12096: April 2001; Renumbers BS 3900-G7:1998 |
|
BSI BS EN ISO 4257 |
Methods of Test for Petroleum and Its Products - BS 2000-477: Liquefied Petroleum Gases - Method of Sampling --Also Known as BS 2000-477: 2001; |
|
BSI BS ISO 7278-4 |
Liquid Hydrocarbons - Dynamic Measurement - Proving Systems for Volumetric Meters - Part 4: Guide for Operators of Pipe Provers-ISO 7278-4:1999; |
|
BSI BS ISO 8243 |
Cigarettes Sampling |
|
BSI BS 1016-10 |
Methods for the Analysis and Testing of Coal and Coke Part 10: Arsenic in Coal and Coke |
|
BSI BS 3900 PART B10 |
Methods of Test for Paints Group B: Tests Involving Chemical Examination of Liquid Paints and Dried Paint Films Part B10: Determination of Hexavalent Chromium Content of Solid Matter |
|
BSI BS 3900 PART B12 |
Methods of Test for Paints Group B: Tests Involving Chemical Examination of Liquid Paints and Dried Paint Films Part B12: Determination of 'Soluble'Mercury Content |
|
BSI BS 3900 PART B5 |
Methods of Test for Paints Group B: Tests Involving Chemical Examination of Liquid Paints and Dried Paint Films Part B5: Preparation of Acid Extracts from Liquid Paints of Coating Powders (For Use in Conjunction with Parts B6 to B12) |
|
BSI BS 3900 PART B7 |
Methods of Test for Paints Group B: Tests Involving Chemical Examination of Liquid Paints and Dried Paint Films Part B7: Determination of 'Soluble'Antimony Content |
|
BSI BS 3900 PART F6 |
Methods of Test for Paints Group F: Durability Tests on Paint Films Part F6: Notes for Guidance on the Conduct of Natural Weathering Tests |
|
BSI BS 506 PART 1 |
Methanol for Industrial Use Part 1: Methanol |
|
BSI BS 684-1.13 |
Methods of analysis of Fats and fatty oils Part 1: Physical methods Section 1.13: Determination of cooling curve |
|
BSI BS 684-1.7 |
Methods of analysis of Fats and fatty oils Part 1: Physical methods Section 1.7: Determination of surface-drying time |
|
BSI BS 684-2.36 |
Methods of analysis of Fats and fatty oils Part 2: Other methods Section 2.36: Determination of butylhydroxyanisole (BHA) and butylhydroxytoluene (BHT)-ISO 6463: 1982; |
|
BSI BS 684-2.48 |
Methods of Analysis of Fats and Fatty Oils - Part 2: Other Methods - Section 2.48: Determination of Mineral Acidity |
|
BSI BS EN 1062-6 |
Paints and Varnishes Coating Materials and Coating Systems for Exterior Masonry and Concrete Part 6: Determination of Carbon Dioxide Permeability |
|
BSI BS EN 13805 |
Foodstuffs - Determination of Trace Elements - Pressure Digestion |
|
BSI BS EN 1464 |
Adhesives - Determination of Peel Resistance of High- Strength Adhesive Bonds - Floating Roller Method (W) |
|
BSI BS EN 302-2 |
Adhesives for load-bearing timber structures Test methods Part 2: Determination of resistance to delamination |
|
BSI BS EN 302-7 |
Adhesives for load-bearing timber structures Test methods Part 7: Determination of the conventional working life |
|
BSI BS EN 599-1 |
Durability of Wood and Wood-Based Products - Performance of Preventive Wood Preservatives as Determined by Biological Tests Part 1: Specification According to Hazard Class |
|
BSI BS EN 937 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Chlorine |
|
BSI BS EN ISO 11339 |
Adhesives T-peel test for flexible-to-flexible bonded assemblies-Supersedes BS EN 14173:2002 |
|
BSI BS EN ISO 13503-2 |
Petroleum and natural gas industries Completion fluids and materials Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations |
|
BSI BS EN ISO 14680-3 |
Paints and varnishes — Determination of pigment content — Part 3: Filtration method-AMD 16871: February 28, 2007 |
|
BSI BS EN ISO 3993 |
Liquefied Petroleum Gas and Light Hydrocarbons - Determination of Density or Relative Density - Pressure Hydrometer Method (W) |
|
BSI BS EN ISO 6144 |
Gas analysis — Preparation of calibration gas mixtures — Static volumetric method-AMD 16905: February 28, 2007 |
|
BSI BS EN ISO 6271-2 |
Clear liquids Estimation of colour by the platinum-cobalt scale Part 2: Spectrophotometric method-Also known as BS 6782-12-2:2004 |
|
BSI BS EN ISO 8780-1 |
Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics Part 1: Introduction (AMD 8533) August 15, 1995 (Formerly BS 3483: Part D1: 1991) (W)-Amd 1; |
|
BSI BS ISO 1041 |
Essential Oils - Determination of Freezing Point |
|
BSI BS ISO 20203 |
Carbonaceous materials used in the production of aluminium Calcined coke Determination of crystallite size of calcined petroleum coke by X-ray diffraction |
|
BSI BS ISO 7278-3 |
Liquid Hydrocarbons - Dynamic Measurement - Proving Systems for Volumetric Meters - Part 3: Pulse Interpolation Techniques-Supersedes BS 6866:Part 3:1987; ISO 7278-3:1998; |
|
BSI BS 1016-1 |
Methods for the Analysis and Testing of Coal and Coke Part 1: Total Moisture of Coal |
|
BSI BS 1016-104.1 |
Methods for Analysis and Testing of Coal and Coke - Part 104: Proximate Analysis - Section 104.1: Determination of Moisture Content of the General Analysis Test Sample-ISO 11722: 1999; |
|
BSI BS 1016-111 |
Methods for Analysis and Testing of Coal and Coke - Part 111: Determination of Abrasion Index of Coal-ISO 12900: 1998; |
|
BSI BS 1016-14 |
Methods for the Analysis and Testing of Coal and Coke Part 14: Analysis of Coal Ash and Coke Ash |
|
BSI BS 1940 |
Butanone (Methyl Ethyl Ketone) for Industrial Use |
|
BSI BS 3156 PART 4 |
Method for the Analysis of Fuel Gases Part 4: Gas Chromatographic Analysis |
|
BSI BS 3544 |
Methods of Test for Polyvinyl Acetate Adhesives for Wood-AMD 5936: November 3, 1966; AMD 6873: January 31, 1992; Partially Replaced by BS EN 205: 1991 |
|
BSI BS 3900 PART B9 |
Methods of Test for Paints Group B: Tests Involving Chemical Examination of Liquid Paints and Dried Paint Films Part B9: Determination of 'Soluble' Cadmium Content |
|
BSI BS 509 PART 2 |
Acetone for Industrial Use Part 2: Methods of Test-Amd 1; |
|
BSI BS 5350 PART C1 |
Methods of Test for Adhesives Group C: Adhesively Bonded Joints: Mechanical Tests Part C1: Determination of Cleavage Strength of Adhesive Bonds |
|
BSI BS 5707 |
Preparations of Wood Preservations in Organic Solvents |
|
BSI BS 6075 PART 1 |
Sampling and Test for Sodium Hydroxide for Industrial Use Part 1: Determination of Sodium Hydroxide Content |
|
BSI BS EN 1139 |
Method for Determination of D-Isocitric Acid Content of Fruit and Vegetable Juices: NADPH Spectrometric Method (W) |
|
BSI BS EN 12393-2 |
Non-Fatty Foods - Multiresidue Methods for the Gas Chromatographic Determination of Pesticide Residues - Part 2: Methods for Extraction and Clean-Up |
|
BSI BS EN 1965-2 |
Structural Adhesives - Corrosion - Part 2: Determination and Classification of Corrosion to a Brass Substrate-Supersedes DD ENV 1965-2:1996; |
|
BSI BS EN 828 |
Adhesives - Wettability - Determination by Measurement of Contact Angle and Critical Surface Tension of Solid Surface |
|
BSI BS EN ISO 16276-1 |
Corrosion protection of steel structures by protective paint systems — Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating — Part 1: Pull-off testing |
|
BSI BS EN ISO 3549 |
Zinc dust pigments for paints - Specifications and test methods-AMD 14167: February 12, 2003; Renumbers BS 3982:1996; |
|
BSI BS EN ISO 8222 |
Petroleum measurement systems Calibration Temperature corrections for use when calibrating volumetric proving tanks-CORR 14315: January 29, 2003; |
|
BSI BS ISO 11408 |
Chemical Conversion Coatings - Black Oxide Coating on Iron and Steel - Specification and Test Methods |
|
BSI BS ISO 4269 |
Petroleum and Liquid Petroleum Products - Tank Calibration by Liquid Measurement - Incremental Method Using Volumetric Meters |
|
BSI BS ISO 6743-5 |
Lubricants, industrial oils and related products (class L) Classification Part 5: Family T (Turbines)-Supersedes BS 6413-5:1988 |
|
BSI BS ISO 8216-1 |
Petroleum Products - Fuels (Class F) - Classification - Part 99: General-Supersedes BS 6843-1:1996 |
|
BSI BS ISO 8573-6 |
Compressed air Part 6: Test methods for gaseous contaminant content |
|
BSI PD CEN/TR 15160 |
Petroleum and related products Applicability of diesel fuel test methods for Fatty Acid Methyl Esters (FAME) Information and results on round robin tests |
|
BSI BS 1016-6 |
Methods for Analysis and Testing of Coal and Coke Part 6: Ultimate Analysis of Coal-AMD 7689; May 15, 1993; Partially Replaced by BS 1016: Subsection 106.4.1: 1993; |
|
BSI BS 2474 |
Recommendations for Names for Chemicals Used in Industry |
|
BSI BS 388 |
Aluminium Pigments |
|
BSI BS 3900 PART A11 |
Methods of Test for Paints Group A: Tests on Liquid Paints (Excluding Chemical Tests) Part A11: Small Scale Test for Combustibility |
|
BSI BS 3900 PART B11 |
Methods of Test for Paints Part B11:Determination of total chromium content of liquid matter [ISO title: Paints and varnishes Determination of “soluble†metal content Part 6: Determination of total chromium content of the liquid portion of the paint Flame atomic absorption spectrometric method]-ISO 3856-6:1984; |
|
BSI BS 3900 PART B6 |
Methods of Test for Paints Group B: Tests Involving Chemical Examination of Liquid Paints and Dried Paint Films Part B6: Determination of Content 'Soluble' Lead Content |
|
BSI BS 5350 PART 0 |
Methods of Test for Adhesives Part 0: General Introduction |
|
BSI BS 5350 PART C15 |
Methods of Test for Adhesives Group C: Adhesively Bonded Joints: Mechanical Tests Part C15: Determination of Bond Strength in Compressive Shear |
|
BSI BS 6376 PART 1 |
Reagents for Chemical Analysis Part 1: Methods of Test |
|
BSI BS 7393 |
Method for Determination of Total Acid Number in Petroleum Products by Semi-Micro Colour Indicator Titration |
|
BSI BS EN 12948 |
Liming Materials - Determination of Size Distribution by Dry and Wet Sieving |
|
BSI BS EN 13130-8 |
Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 8: Determination of isocyanates in plastics |
|
BSI BS EN 13196 |
Fruit and Vegetable Juices - Determination of Total Sulfur Dioxide by Distillation |
|
BSI BS EN 15336 |
Adhesives — Determination of the time to rupture of bonded joints under static load |
|
BSI BS EN 302-3 |
Adhesives for load-bearing timber structures Test methods Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength-AMD 15973: February 14, 2006 |
|
BSI BS EN 939 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Hydrochloric Acid |
|
BSI BS EN ISO 10519 |
Rapeseed - Determination of Chlorophyll Content - Spectrometric Method-AMD 11091: Feburary 2001; CORR 13102: March 2001; Renumbers BS 4289-10:1998 |
|
BSI BS EN ISO 11541 |
Natural gas Determination of water content at high pressure-AMD 14241: March 3, 2003; Renumbers BS 3156-11.6: 1997; |
|
BSI BS EN ISO 16000-2 |
Indoor air Part 2: Sampling strategy for formaldehyde-AMD 16405: August, 2006;:2004 |
|
BSI BS EN ISO 7783-2 |
Paints and Varnishes - Coating Materials and Coating Systems for Exterior Masonary and Concrete - Part 2: Determination and Classification of Water-Vapour Transmission Rate (Permeability) |
|
BSI BS ISO/TR 9122-5 |
Toxicity Testing of Fire Effluents Part 5: Prediction of Toxic Effects of Fire Effluents |
|
BSI PD IEC/TR 62010 |
Analyser systems Guidance for maintenance management |
|
BSI BS 2690 PART 117 |
Water Used in Industry Part 117: Long-Chain Fatty Amines: Spectrophotometric Method |
|
BSI BS 4024 |
Pentachlorophenyl Laurate |
|
BSI BS 4401-1 |
Methods of Test for Meat and Meat Products - Part 1: Determination of Total Ash-ISO 936: 1998; |
|
BSI BS 4968-70 |
Di-Isobutyl Phthalate, Di-Isoctyl Phthalate and Di-Isocytl Sebacate |
|
BSI BS 506 PART 2 |
Methanol for Industrial Use Part 2: Methods of Test-Amd 1; |
|
BSI BS 5202-12 |
Methods for Chemical Analysis of Tobacco and Tobacco Products - Part 12: Determination of Nicotine in Smoke Condensate of Cigarettes (Gas-Chromatographic Method)-CORR 13043: May 2001; ISO 10315:2000; |
|
BSI BS 5309 PART 4 |
Methods for Sampling Chemical Products Part 4: Sampling of Solids |
|
BSI BS 5348 PART 2 |
Methods for Sampling Meat and Meat Products Part 2: Preparation of Test Samples for Microbiological Examination (ISO 3100-2: 1988) |
|
BSI BS 5350 PART B9 |
Methods of Test for Adhesives Group B: Adhesives Part B9: Determination of Resistance to Sagging (Flow After Application) |
|
BSI BS 5350 PART C14 |
Methods of Test for Adhesives Group C: Adhesively Bonded Joints: Mechanical Tests Part C14: 90 Degree Peel Test for a Rigid- To-Rigid Assembly |
|
BSI BS 5350 PART D4 |
Methods of Test for Adhesives Group D: Adhesively Bonded Joints: Environmental Tests Part D4: Determination of Staining Potential (AMD 5803) February 28, 1989-Amd 1; |
|
BSI BS 553 |
Ethyl Acetate for Industrial Use |
|
BSI BS 684 SEC 1.12 |
Methods of Analysis of Fats and Fatty Oils Part 1: Physical Methods Section 1.12: Determination of Dilation |
|
BSI BS 7114 PART 2 |
Fireworks Part 2: Specification for Fireworks-Partially Superseded by BS EN 14035-6:2004, BS EN 14035-7:2004, BS EN 14035-15:2003, BS EN 14035-19:2003, BS EN 14035-22:2004, BS EN 14035-23:2003, BS EN 14035-24:2004, BS EN 14035-25:2006; BS EN 14035-27:2003, BS EN 14035-28:2004, BS EN 14035-29:2004, BS EN 14035-34:2003; BS EN 14035-35:2004 and BS EN 14035-36:2004 |
|
BSI BS 7207 |
Crude Vegetable Fats-Supersedes BS 628, BS 629, BS 631, BS 650 - 653, BS 655, BS 1939 (all 1967) and BS 5170: 1975; |
|
BSI BS 7959-2 |
Materials Used for the Control of Liquid Spillages - Part 2: Determination of Water Repellency or Buoyancy for Hydrophobic (Oil Sorbent) Materials |
|
BSI BS EN 1186-4 |
Materials and Articles in Contact with Foodstuffs - Plastics - Part 4: Test Methods for Overall Migration into Olive Oil by Cell-Supersedes DD ENV 1186-4: 1994; |
|
BSI BS EN 12255-4 |
Wastewater Treatment Plants - Part 4: Primary Settlement-CORR 13961: June 21, 2002; |
|
BSI BS EN 12808-1 |
Adhesives and Grouts for Tiles - Part 1: Determination of Chemical Resistance of Reaction Resin Mortars |
|
BSI BS EN 13130-3 |
Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 3: Determination of acrylonitrile in food and food simulants |
|
BSI BS EN 13438 |
Paints and varnishes Powder organic coatings for galvanized or sherardised steel products for construction purposes-Supersedes BS 6497: 1984 |
|
BSI BS EN 1528-2 |
Fatty Food - Determination of Pesticides and Polychlorinated Biphenyls (PCBs) Part 2: Extraction of Fat, Pesticides and PCBs, and Determination of Fat Content |
|
BSI BS EN 1940 |
Self Adhesive Tapes - Measurement of Breaking Strength (W) |
|
BSI BS EN 205 |
Adhesives Wood adhesives for non-structural applications Determination of tensile shear strength of lap joints |
|
BSI BS EN 29117 |
Paints and Varnishes - Determination of Through-Dry Time - Method of Test (ISO 9117: 1990) (AMD 7501) December 15, 1992 (Formerly BS 3900: Part C3: 1990 Replaces BS 3900: Part C3: 1971) (W)-Amd 2; |
|
BSI BS EN ISO 15029-1 |
Petroleum and Related Products - Determination of Spray Ignition Characteristics of Fire-Resistant Fluids - Part 1: Spray Flame Persistence - Hollow-Cone Nozzle Method |
|
BSI BS EN ISO 2884-1 |
Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear-AMD 16865: February 28, 2007 |
|
BSI BS EN ISO 3231 |
Paints and Varnishes - Determination of Resistance to Humid Atmospheres Containing Sulfur Dioxide-AMD 9930: 3/1998; Renumbers BS 3900: Part F8: 1993 |
|
BSI BS EN ISO 3262-12 |
Extenders for Paints - Specifications and Methods of Test - Part 12: Muscovite-Type Mica-CORR 13750: March 15, 2002; |
|
BSI BS EN ISO 3262-3 |
Extenders for Paints - Specifications and Methods of Test - Part 3: Blanc Fixe-Together with the Other Parts of BS EN ISO 3262, it Will Supersede BS 1795: 1976 Which is Declared Obsolescent; |
|
BSI BS EN ISO 3262-7 |
Extenders for Paints - Specifications and Methods of Test - Part 7: Dolomite-Together with the Other Parts of BS EN ISO 3262, it Will Supersede BS 1795: 1976 Which is Declared Obsolescent; |
|
BSI BS EN ISO 4625-1 |
Binders for paints and varnishes Determination of softening point Part 1: Ring-and-ball method-Amd 16196:04/28/2006; Renumbers BS ISO 4625-1:2004 |
|
BSI BS EN ISO 787-18 |
General Methods of Test for Pigments and Extenders Part 18: Determination of Residue on Sieve - Mechanical Flushing Procedure (W) |
|
BSI BS EN ISO 787-2 |
General Methods of Test for Pigments and Extenders Part 2: Determination of Matter Volatile at 105 Degrees C (AMD 8506) August 15, 1995 (Formerly BS 3483: Part B6: 1982) (W)-Amd 1; |
|
BSI BS EN ISO 8130-9 |
Coating Powders - Part 9: Sampling-AMD 10702: March 2000; Renumbers BS 3900-J1:1993; Supersedes BS 3900-J1:1987 |
|
BSI BS ISO 11723 |
Solid mineral fuels Determination of arsenic and selenium Eschka’s mixture and hydride generation method |
|
BSI BS ISO 11997-1 |
Paints and varnishes Determination of resistance to cyclic corrosion conditions Part 1: Wet (salt fog)/dry/humidity-Supersedes BS 3900-F18:1998; Also Known as BS 3900-F18:2005 |
|
BSI BS ISO 8573-8 |
Compressed air Part 8: Test methods for solid particle content by mass concentration |
|
BSI BS ISO 9403 |
Crude Petroleum - Transfer Accountability - Guidelines for Cargo Inspection |
|
BSI DD CEN/TS 13130-13 |
Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 13: Determination of 2,2-bis(4-hydroxyphenyl)propane (Bisphenol A) in food simulants |
|
BSI DD CEN/TS 14778-1 |
Solid biofuels Sampling Part 1: Methods for sampling |
|
BSI BS 1016-105 |
Methods for Analysis and Testing of Coal and Coke Part 105: Determination of Gross Calorific Value |
|
BSI BS 1016-106.4.1 |
Methods for Analysis and Testing of Coal and Coke Part 106: Ultimate Analysis of Coal and Coke Section 106.4: Determination of Total Sulfur Content Subsection 106.4.1: Eschka Method (W) |
|
BSI BS 1016-108.2 |
Methods for Analysis and Testing of Coal and Coke Part 108: Tests Special to Coke Section 108.2: Determination of Micum and Irsid Indices |
|
BSI BS 1016-112 |
Methods for Analysis and Testing of Coal and Coke Part 112: Determination of Hardgrove Grindability Index of Hard Coal-ISO 5074: 1994; |
|
BSI BS 3482 PART 6 |
Methods of Test for Desiccants Part 6: Determination of Adsorptive Capacity |
|
BSI BS 3674 |
Sodium Carbonate (Technical Grades) |
|
BSI BS 4367 |
Methods of Test for Nitric Acid |
|
BSI BS 5350 PART C13 |
Methods of Test for Adhesives Group C: Adhesively Bonded Joints: Mechanical Tests Part 13: Climbing Drum Peel Test |
|
BSI BS 5350 PART E1 |
Methods of Test For Adhesives Part E1: Guide to Statistical Analysis (AMD 6285) April 30, 1990-Amd 1; |
|
BSI BS 6209 |
Solvent Cement for Non-Pressure Thermoplastics Pipe Systems |
|
BSI BS 6245-1 |
Sampling Tobacco and Tobacco Products - Part 1: Method of Sampling Batches of Raw Material (General Principles)-ISO 4874: 2000; |
|
BSI BS 684 SEC 1.11 |
Methods of Analysis of Fats and Fatty Oils Part 1: Physical Methods Section 1.11: Determination of Penetration Value |
|
BSI BS 7557 |
Limits of Metal Release from Painted Surfaces of Articles, Liable to Come into Contact with Foodstuffs (W) |
|
BSI BS 7956 |
Specification for Primers for Woodwork-Supersedes BS 5082: 1993 and BS 7779: 1994; |
|
BSI BS EN 1014-4 |
Wood Preservatives - Creosote and Creosoted Timber - Methods of Sampling and Analysis Part 4: Determination of the Water Extractable Phenols Content of Creosote (W) |
|
BSI BS EN 12002 |
Adhesives for Tiles - Determination of Transverse Deformation for Cementitious Adhesives and Grouts |
|
BSI BS EN 12393-1 |
Non-Fatty Foods - Multiresidue Methods for the Gas Chromatographic Determination of Pesticide Residues - Part 1: General Considerations |
|
BSI BS EN 12393-3 |
Non-Fatty Foods - Multiresidue Methods for the Gas Chromatographic Determination of Pesticide Residues - Part 3: Determination and Confirmatory Tests |
|
BSI BS EN 1275 |
Chemical Disinfectants and Antiseptics - Basic Fungicidal Activity - Test Method and Requirements (Phase 1) |
|
BSI BS EN 12808-2 |
Grouts for Tiles - Part 2: Determination of Resistance to Abrasion |
|
BSI BS EN 13130-1 |
Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and the selection of conditions of exposure to food simulants |
|
BSI BS EN 13650 |
Soil Improvers and Growing Media - Extraction of Aqua Regia Soluble Elements |
|
BSI BS EN 13673-2 |
Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours Part 2: Determination of the maximum rate of explosion pressure rise |
|
BSI BS EN 13704 |
Chemical Disinfectants - Quantitative Suspension Test for the Evaluation of Sporicidal Activity of Chemical Disinfectants Used in Food, Industrial, Domestic and Institutional Areas - Test Method and Requirements (Phase 2, Step 1) |
|
BSI BS EN 14122 |
Foodstuffs Determination of vitamin B1 by HPLC-CORR 16206: July 31, 2006 |
|
BSI BS EN 14156 |
Derivatives from coal pyrolysis Coal tar based oils: Coal tar fuel Specifications and test methods |
|
BSI BS EN 15284 |
Materials and articles in contact with food stuffs — Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastics cookware |
|
BSI BS EN 1965-1 |
Structural Adhesives - Corrosion - Part 1: Determination and Classification of Corrosion to a Copper Substrate-Supersedes DD ENV 1965-1:1996; |
|
BSI BS EN 49-1 |
Wood Preservatives - Determination of the Protective Effectiveness Against Anobium Punctatum (De Geer) by Egg-Laying and Larval Survival - Part 1: Application by surface treatment (Laboratory method) |
|
BSI BS EN 599-2 |
Durability of Wood and Wood-Based Products - Performance of Preventive Wood Preservatives as Determined by Biological Tests Part 2: Classification and Labelling |
|
BSI BS EN 923 |
Adhesives - Terms and Definitions |
|
BSI BS EN ISO 10283 |
Binders for paints Part 10: Determination of monomeric diisocyanates in polyisocyanate resins-AMD 16200: August 2006; Renumbers BS 6782-10:1998 |
|
BSI BS EN ISO 10964 |
Adhesives - Determination of Torque Strength of Anaerobic Adhesives on Threaded Fasteners-Supersedes BS 5350: Part G1: 1987; |
|
BSI BS EN ISO 11997-2 |
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light-AMD 16874: February 28, 2007 |
|
BSI BS EN ISO 14935 |
Petroleum and Related Products - Determination of Wick Flame Persistence of Fire-Resistant Fluids |
|
BSI BS EN ISO 15605 |
Adhesives — Sampling-CORR 16857: January 31, 2007 |
|
BSI BS EN ISO 3262-1 |
Extenders for Paints - Specifications and Methods of Test - Part 1: Introduction and General Test Methods-Together with the Other Parts of BS EN ISO 3262, it Will Supersede BS 1795: 1976 Which is Declared Obsolescent; |
|
BSI BS EN ISO 3262-16 |
Extenders for Paints - Specifications and Methods of Test - Part 16: Aluminium Hydroxides-CORR 11070, September 2000; Together with the Other Parts of BS EN ISO 3262, Will Supersede BS 1795:1976; |
|
BSI BS EN ISO 3961 |
Animal and Vegetable Fats and Oils - Determination of Iodine Value-AMD 10896: 12/2000; Renumbers BS 684-2.13: 1996 |
|
BSI BS EN ISO 4623-2 |
Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates-Also known as BS 3900-F20:2004 |
|
BSI BS EN ISO 6272-1 |
Paints and varnishes Rapid-deformation (impact resistance) tests Part 1: Falling-weight test, large-area indenter-Supersedes BS EN ISO 6272:1994; Also known as BS 3900-E13:2004 |
|
BSI BS EN ISO 6326-5 |
Natural Gas - Determination of Sulfur Compounds Part 5: Lingener Combustion Method-AMD 9992: June 1998; Renumbers BS 3156: SUBSEC 11.4.5: 1994 |
|
BSI BS EN ISO 7784-1 |
Paints and varnishes - Determination of resistance to abrasion — Part 1: Rotating abrasive-paper-covered wheel method-CORR 16870: February 28, 2007 |
|
BSI BS EN ISO 787-3 |
General Methods of Test for Pigments and Extenders - Part 3: Determination of Matter Soluble in Water - Hot Extraction Method-CORR 13422: October 5,2001; |
|
BSI BS EN ISO 8780-2 |
Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics Part 2: Dispersion Using an Oscillatory Shaking Machine (AMD 8529) August 15, 1995 (Formerly BS 3483: Part D2: 1991. Replaces BS 3483: Part B5: 1974) (W)-Amd 1; |
|
BSI BS EN ISO 8780-3 |
Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics Part 3: Dispersion Using a High-Speed Impeller Mill-AMD 8528: August 15, 1995; Renumbers BS 3483: Part D3:1991 |
|
BSI BS EN ISO 8780-4 |
Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics Part 4: Dispersion Using a Bead Mill (AMD 8527) August 15,1995 (Formerly BS 3483: Part D4: 1991) (W)-Amd 1; |
|
BSI BS EN ISO 8780-5 |
Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics Part 5: Dispersion Using an Automatic Muller (AMD 8526) August 15, 1995 (Formerly BS 3483: Part D5: 1991) (W)-Amd 1; |
|
BSI BS EN ISO 8780-6 |
Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics Part 6: Dispersion Using a Triple-Roll Mill (AMD 8531) August 15, 1995 (Formerly BS 3483: Part D6: 1991) (W)-Amd 1; |
|
BSI BS EN ISO 8781-3 |
Pigments and Extenders - Methods of Assessment of Dispersion Characteristics Part 3: Assessment from the Change in Gloss (AMD 8532) August 15, 1995 (Formerly BS 3483: Part E3: 1991) (W)-Amd 1; |
|
BSI BS ISO 13302 |
Sensory analysis Methods for assessing modifications to the flavour of foodstuffs due to packaging |
|
BSI BS ISO 22489 |
Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy |
|
BSI BS ISO 4619 |
Driers for Paints and Varnishes-Supersedes BS 332: 1956; ISO 4619: 1998; |
|
BSI BS ISO/TR 9122-6 |
Toxicity Testing of Fire Effluents Part 6: Guidance for Regulators and Specifiers on the Assessment of Toxic Hazard in Fires in Buildings and Transport |
|
BSI DD CEN/TS 14235 |
Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration |
|
BSI PD CEN/TR 14548 |
Adhesives Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
|
BSI BS 1016-104.3 |
Methods for Analysis and Testing of Coal and Coke - Part 104: Proximate Analysis - Section 104.3: Determination of Volatile Matter Content-ISO 562: 1998; |
|
BSI BS 1016-104.4 |
Methods for Analysis and Testing of Coal and Coke - Part 104: Proximate Analysis - Section 104.4: Determination of Ash-AMD 10511 November 1999; ISO 1171: 1997; |
|
BSI BS 1016-108.1 |
Methods for Analysis and Testing of Coal and Coke Part 108: Test Special to Coke Section 108.1: Determination of Shatter Indices-ISO 616: 1995; |
|
BSI BS 1016-108.5 |
Methods for Analysis and Testing of Coal and Coke Part 108: Tests Special to Coke Section 108.5: Determination of Density and Porosity |
|
BSI BS 2690 PART 104 |
Water Used in Industry Part 104: Silica: Reactive, Total and Suspended |
|
BSI BS 4401 PART 6 |
Methods of Test for Meat and Meat Products Part 6: Determination of Chloride Content (Volhard Method) (ISO 1841-1: 1996) (W) |
|
BSI BS 4401-7 |
Methods of Test for Meat and Meat Products Part 7: Determination of Nitrate Content |
|
BSI BS 4431 |
Methods of Sampling and Test for Liquefied Anhydrous Ammonia |
|
BSI BS 508 PART 2 |
Butan-1-ol for Industrial Use Part 2: Methods of Test |
|
BSI BS 5202-14 |
Methods for Chemical Analysis of Tobacco and Tobacco Products - Part 14: Determination of Total and Nicotine-Free Dry Particulate Matter Using a Routine Analytical Smoking Machine-ISO 4387: 2000 |
|
BSI BS 5350 PART A1 |
Methods of Test for Adhesives Part A1: Adherend Preparation (AMD 6556) January 31, 1991-Amd 1; |
|
BSI BS 5634 |
Potassium Hydroxide |
|
BSI BS 6219 |
Test Sieves for Cereals-AMD 10785, May 2000; ISO 5223: 1995; |
|
BSI BS 6248-7 |
Caseins and Caseinates - Part 7: Method for Determination of Protein Content (Reference Method) |
|
BSI BS 6279-2 |
Storage of Cereals and Pulses - Part 2: Practical Recommendations-ISO 6322-2:2000; |
|
BSI BS 6392 PART 0 |
Testing of Ethanol for Industrial Use Part 0: General Introduction-Amd 1; |
|
BSI BS 6392 PART 7 |
Testing of Ethanol for Industrial Use Part 7: Method for Determination of Methanol Content (0.10% (V/V) to 1.50% (V/V)) (Visual Colorimetric Method )-Amd 1; |
|
BSI BS 684 SEC 1.5 |
Methods of Analysis of Fats and Fatty Oils Part 1: Physical Methods Section 1.5: Determination of Cloud Point-Amd 1; |
|
BSI BS 684 SEC 1.6 |
Methods of Analysis of Fats and Fatty Oils Part 1: Physical Methods Section 1.6: Determination of Titre |
|
BSI BS 684 SEC 1.8 |
Methods of Analysis of Fats and Fatty Oils Part 1: Physical Methods Section 1.8: Determination of Smoke Point (AMD 7982) November 15, 1993 (W)-Amd 1; |
|
BSI BS 684 SEC 2.11 |
Methods of Analysis of Fats and Fatty Oils Part 2: Other Methods Section 2.11: Determination of Volatile Acids (Reichert, Polenske and Kirschner Values) |
|
BSI BS 684 SEC 2.27 |
Methods of Analysis of Fats and Fatty Oils Part 2: Other Methods Section 2.27: Determination of Bleachability |
|
BSI BS 696-1 |
Gerber Method for the Determination of Fat in Milk and Milk Products Part 1: Apparatus |
|
BSI BS 7702 |
Guide to Volumetric Metering of Viscous Hydrocarbons (ISO 9200: 1993) (W) |
|
BSI BS 7959-1 |
Materials used for the control of liquid spillages Part 1: Determination of sorbency |
|
BSI BS EN 1014-1 |
Wood Preservatives - Creosote and Creosoted Timber - Methods of Sampling and Analysis Part 1: Procedure for Sampling Creosote |
|
BSI BS EN 1062-1 |
Paints and Varnishes - Coating Materials and Coating Systems for Exterior Masonry and Concrete - Part 1: Classification |
|
BSI BS EN 12808-4 |
Grouts for Tiles - Part 4: Determination of Shrinkage |
|
BSI BS EN 12808-5 |
Grouts for Tiles - Part 5: Determination of Water Absorption |
|
BSI BS EN 14175-4 |
Fume cupboards — Part 4: On-site test methods |
|
BSI BS EN 1499 |
Chemical Disinfectants and Antiseptics - Hygienic Handwash - Test Method and Requirements (Phase 2/Step 2) |
|
BSI BS EN 15326 |
Bitumen and bituminous binders — Measurement of density and specific gravity — Capillary-stoppered pyknometer method |
|
BSI BS EN 20-1 |
Wood Preservatives - Determination of the Protective Effectiveness Against Lyctus Brunneus (Stephens) - Part 1: Application by Surface Treatment (Laboratory Method) |
|
BSI BS EN 28510-1 |
Adhesives - Peel Test for a Flexible-Bonded-to-Rigid Test Specimen Assembly Part 1: 90 Degree Peel (ISO 8510-1: 1990) (AMD 7559) Aug 15, 1993 (Formerly BS 5350: Part C10: 1991 Replaces BS 5350: Part C10: 1979) (W)-Amd 1; |
|
BSI BS EN 3665 |
Test Methods for Paints and Varnishes - Filiform Corrosion Resistance Test on Aluminium Alloys |
|
BSI BS EN 61207-3 |
Gas analyzers Expression of performance Part 3: Paramagnetic oxygen analyzers |
|
BSI BS EN ISO 12228 |
Animal and Vegetable Fats and Oils - Determination of Individual and Total Sterols Contents - Gas Chromatographic Method-Also Known as BS 684-2.38: 1999; Supersedes BS 684-2.38: 1992 |
|
BSI BS EN ISO 12922 |
Lubricants, Industrial Oils and Related Products (Class L) - Family H (Hydraulic Systems) - Specifications for Categories HFAE, HFAS, HFB, HFC, HFDR and HFDU-AMD 13874: 7/15/2002; Corr 13158: 6/2001; Renumbers BS ISO 12922: 1999 |
|
BSI BS EN ISO 13503-1 |
Petroleum and natural gas industries Completion fluids and materials Part 1: Measurement of viscous properties of completion fluids-AMD 16056: February 2006;: 2003 |
|
BSI BS EN ISO 1517 |
Paints and Varnishes - Surface-Drying Test - Ballotini Method-AMD 8609: September 15, 1995; Supersedes BS 3900-C2: 1971; Also Known as BS 3900-C2: 1994 |
|
BSI BS EN ISO 17642-2 |
Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 2: Self-restraint tests |
|
BSI BS EN ISO 17895 |
Paints and varnishes Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) |
|
BSI BS EN ISO 21469 |
Safety of machinery Lubricants with incidental product contact Hygiene requirements |
|
BSI BS EN ISO 3262-10 |
Extenders for Paints - Specifications and Methods of Test - Part 10: Natural Talc/Chlorite in Lamellar Form-CORR 13425: October 5,2001; Together with the Other Parts of BS EN ISO 3262, Will Supersede BS 1795:1976 Which is Declared Obsolescent; |
|
BSI BS EN ISO 3678 |
Paints and Varnishes - Print-Free Test-AMD 8613: September 15, 1995; Renumbers BS 3900: Part C8: 1978 |
|
BSI BS EN ISO 4622 |
Paints and Varnishes - Pressure Test for Stackability (AMD 8357) February 15, 1995 (W)-Amd 1; |
|
BSI BS EN ISO 5555 |
Animal and Vegetable Fats and Oils - Sampling-CORR 13755: March 6, 2002; |
|
BSI BS EN ISO 787-5 |
General Methods of Test for Pigments and Extenders Part 5: Determination of Oil Absorption Value (AMD 8687) December 15, 1995 (Formerly BS 3483: Part B7: 1982) (W)-Amd 1; |
|
BSI BS ISO 11056 |
Sensory Analysis - Methodology - Magnitude Estimation Method |
|
BSI BS ISO 16820 |
Sensory analysis Methodology Sequential analysis |
|
BSI BS ISO 18132-1 |
Refrigerated light hydrocarbon fluids General requirements for automatic level gauges Part 1: Gauges onboard ships carrying liquefied gases |
|
BSI BS ISO 6145-1 |
Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 1: Methods of calibration-Supersedes BS 4559-5-1:1987 |
|
BSI BS ISO 6743-99 |
Lubricants, industrial oils and related products (class L) Classification Part 99: General-Supersedes BS 6413-0: 1983; |
|
BSI BS ISO 8587 |
Sensory analysis Methodology Ranking-Supersedes BS 5929-6:1989 |
|
BSI BS ISO 9587 |
Metallic and Other Inorganic Coatings - Pretreatment of Iron or Steel to Reduce the Risk of Hydrogen Embrittlement |
|
BSI DD CEN/TS 14778-2 |
Solid biofuels Sampling Part 2: Methods for sampling particulate material transported in lorries |
|
BSI BS 1016-107.1 |
Analysis and Testing of Coal and Coke Part 107: Caking and Swelling Properties of Coal Section 107.1: Determination of Crucible Swelling Number |
|
BSI BS 1016-107.2 |
Analysis and Testing of Coal and Coke Part 107: Caking and Swelling Properties of Coal Section 107.2: Assessment of Caking Power by Gray-King Coke Test |
|
BSI BS 2511 |
Methods for the Determination of Water (Karl Fischer Method) |
|
BSI BS 2621-5 |
Glycerol (Glycerine)-AMD 3398: October 31, 1980; |
|
BSI BS 2690 PART 15 |
Water Used in Industry Part 15: Free EDTA, Total Salts of EDTA, Polyacrylate and Polymethacrylate |
|
BSI BS 3947 |
Liquid Chlorine (AMD 7587) April 15, 1993 (W)-Amd 1; |
|
BSI BS 4401 PART 15 |
Methods of Test for Meat and Meat Products Part 15: Detection of Polyphosphates |
|
BSI BS 4651 PART 2 |
Ammonia Solution Part 2: Method for Determination of Ammonia Content |
|
BSI BS 5350 PART A2 |
Methods of Test for Adhesives Group A: Adherends Part A2: Guide to the Selection of Adherend Materials |
|
BSI BS 5350 PART C7 |
Methods of Test for Adhesives Group C: Adhesively Bonded Joints: Mechanical Tests Part C7: Determination of Creep and Resistance to Sustained Application of Force |
|
BSI BS 5551 SUBSEC 4.1.4 |
Fertilizers Part 4: Chemical Analysis Sec 4 Determination of Nitro- gen Subsection 4.1.4: Method for Determination of Ammoniacal Nitrogen Content in the Presence of Other Substance Which Rel Ammonia When Treated with Sodium Hydroxide (Titrimetric Method) |
|
BSI BS 5598 PART 11 |
Methods of Sampling and Test for Halogenated Hydrocarbons Part 11: Determination of 'Inert' Gas Content of Chlorofluorohydrocarbons Gas Chromatographic Method, General Purposes |
|
BSI BS 573 |
Plasticizer Esters (Also BS 574, 1995, 2535, 2536, & 3647) |
|
BSI BS 5797 |
Methods for Measurement of Gassing of Insulating Liquids Under Electrical Stress and Ionization-AMD 5617: August 1987; IEC 628:1985; |
|
BSI BS 6215 PART 1 |
Methods of Test for Agricultural Food Products Part 1: Determination of Crude Fibre Content (General Method) (ISO 5498: 1981) (AMD 7726) June 15, 1993 (W)-Amd 2; |
|
BSI BS 6248 PART 2 |
Caseins and Caseinates Part 2: Method for Determination of 'Fixed Ash' of Caseins (Reference Method) |
|
BSI BS 662 PART 2 |
Carbon Disulphide for Industrial Use Part 2: Sampling and Methods of Test |
|
BSI BS 684 SEC 1.9 |
Methods of Analysis of Fats and Fatty Oils Part 1: Physical Methods Section 1.9: Determination of Water- Insoluble Solvents |
|
BSI BS 684 SEC 2.15 |
Methods of Analysis of Fats and Fatty Oils Part 2: Other Methods Section 2.15: Calculation of Total Saponifiable Matter |
|
BSI BS 7420 |
Determination of Calorific Values of Solid, Liquid and Gaseous Fuels (Including Definitions) |
|
BSI BS 770 PART 7 |
Methods for Chemical Analysis of Cheese Part 7: Determination of Citric Acid Content of Cheese and Processed Cheese Products (Enzymatic Method)-(W); ISO 2963: 1997 |
|
BSI BS 7849 PART 1 |
Petroleum and Liquid Petroleum Products - Direct Static Measurements - Contents of Vertical Storage Tanks Part 1: Mass Measurement by Hydrostatic Tank Gauging (ISO 11223-1: 1995) (W) |
|
BSI BS EN 1067 |
Adhesives - Examination and Preparation of Samples for Testing |
|
BSI BS EN 1276 |
Chemical Disinfectants and Antiseptics - Quantitative Suspension Test for the Evaluation of Bactericidal Activity of Chemical Disinfectants and Antiseptics Used in Food, Industrial, Domestic, and Institutional Areas - Test Method and Requirements (Phase 2, Step 1)-CORR 13801: September 17, 2002; Supersedes BS 6471: 1984 and BS 808: 1986; Together with BS EN 1650: 1984 it Supersedes DD 177: 1998; |
|
BSI BS EN 12808-3 |
Grouts for Tiles - Part 3: Determination of Flexural and Compressive Strength |
|
BSI BS EN 12981 |
Coating plants Spray booths for application of organic powder coating material Safety requirements |
|
BSI BS EN 1324 |
Adhesives for Tiles - Determination of Shear Adhesion Strength of Dispersion Adhesives |
|
BSI BS EN 1347 |
Adhesives for Tiles - Determination of Wetting Capability |
|
BSI BS EN 13585 |
Foodstuffs - Determination of Fumonisins B1 and B2 in Maize - HPLC Method with Solid Phase Extraction Clean-Up |