|
BSI PD CEN/TR 81-10 |
Safety rules for the construction and installation of lifts Basics Part 10: System of the EN 81 series of standards |
|
BSI PD ISO/TR 14799-1 |
Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison |
|
BSI BS 1968 |
Floats for Ballvalves (Copper)-Amd 2; |
|
BSI BS 2655 PART 5 |
Lifts, Escalators, Passenger Conveyors and Paternosters Part 5: General Requirements for Paternosters-AMD 1572: October 16, 1974; |
|
BSI BS 4207 |
Installation of Monolithic Linings for Steel Chimneys and Flues |
|
BSI BS 4508 PART 1 |
Thermally Insulated Underground Pipelines Part 1: Specification for Steel Cased Systems with Air Gap (AMD 7727) July 15, 1993 (R)-Amd 1; |
|
BSI BS 4901 |
Plastics Colours for Building Purposes |
|
BSI BS 5803 PART 1 |
Thermal Insulation for Use in Pitched Roof Spaces in Dwellings Part 1: Specification for Man-Made Mineral Fibre Thermal Insulation Mats-AMD 8168; May 15, 1994; |
|
BSI BS 5834 PART 2 |
Surface Boxes, and Guards for Underground Stopvalves for Gas and Waterworks Purposes Part 2: Small Surface Boxes |
|
BSI BS 5871-1 |
Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances Part 1: Gas fires, convector heaters, fire/back boilers and heating stoves (2nd and 3rd family gases) |
|
BSI BS 5964 PART 1 |
Building Setting Out and Measurement Part 1: Methods of Measuring, Planning and Organization and Acceptance Criteria-AMD 9314 December 15, 1996; ISO 4463-1: 1989 |
|
BSI BS 6228 |
Format and Content of Manuals on Operation and Maintenance for Earth- Moving Machinery |
|
BSI BS 6579 PART 7 |
Safety Fences and Barriers for Highways Part 7: Components for Untensioned Corrugated Beam Safety Fence |
|
BSI BS 7036 PART 3 |
Code of Practice for Safety at Powered Doors for Pedestrian Use Part 3: Swing Doors and Balanced Doors (R) |
|
BSI BS 7291-2 |
Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings Part 2: Specification for polybutylene (PB) pipe and associated fittings |
|
BSI BS 7989 |
Recirculatory Filtration Fume Cupboards |
|
BSI BS EN 1026 |
Windows and Doors - Air Permeability - Test Method-Supersedes BS 5368-1:1976 |
|
BSI BS EN 1065 |
Adjustable Telescopic Steel Props - Product Specifications, Design and Assessment by Calculation and Test |
|
BSI BS EN 12086 |
Thermal Insulating Products for Building Applications - Determination of Water Vapour Transmission Properties |
|
BSI BS EN 12094-4 |
Fixed firefighting systems Components for gas extinguishing systems Part 4: Requirements and test methods for container valve assemblies and their actuators |
|
BSI BS EN 12445 |
Industrial, Commercial and Garage Doors and Gates - Safety in Use of Power Operated Doors - Test Methods |
|
BSI BS EN 12715 |
Execution of Special Geotechnical Work - Grouting |
|
BSI BS EN 12843 |
Precast concrete products Masts and poles |
|
BSI BS EN 1297 |
Flexible sheets for waterproofing Bitumen, plastic and rubber sheets for roof waterproofing Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water |
|
BSI BS EN 13162 |
Thermal insulation products for buildings Factory made mineral wool (MW) products Specification-CORR 16194: March 2006 |
|
BSI BS EN 13187 |
Thermal Performance of Buildings - Qualitative Detection of Thermal Irregularities in Building Envelopes - Infrared Method-ISO 6781: 1983 Modified; |
|
BSI BS EN 13263-2 |
Silica fume for concrete Part 2: Conformity evaluation |
|
BSI BS EN 13304 |
Bitumen and bituminous binders Framework for specification of oxidised bitumens |
|
BSI BS EN 13384-1 |
Chimneys Thermal and fluid dynamic calculation methods Part 1: Chimneys serving one appliance-AMD 15819: May 31, 2006 |
|
BSI BS EN 13747 |
Precast concrete products Floor plates for floor systems |
|
BSI BS EN 14388 |
Road traffic noise reducing devices Specifications |
|
BSI BS EN 771-2 |
Specification for masonry units Part 2: Calcium silicate masonry units-AMD 15974: November 28, 2005 |
|
BSI BS EN ISO 10545-4 |
Ceramic Tiles Part 4: Determination of Modulus of Rupture and Breaking Strength |
|
BSI BS EN ISO 10545-9 |
Ceramic Tiles Part 9: Determination of Resistance to Thermal Shock-Supersedes BS 6431: Part 16: 1983 |
|
BSI BS EN ISO 11654 |
Acoustics - Sound Absorbers for Use in Buildings - Rating of Sound Absorption |
|
BSI PD ISO/TR 11071-1 |
Comparison of worldwide lift safety standards Part 1: Electric lifts (elevators) |
|
BSI PD ISO/TR 11071-2 |
Comparison of worldwide lift safety standards Part 2: Hydraulic lifts (elevators) |
|
BSI BS 1622 |
Spreaders for Winter Maintenance |
|
BSI BS 4050 PART 2 |
Mosaic Parquet Panels Part 2: Classification and Quality Requirements (Formerly BS 4050: 1966)-Amd 2; |
|
BSI BS 4078-2 |
Powder Actuated Fixing Systems - Part 2: Specification for Tools-AMD 10692: October 1999; |
|
BSI BS 5642 PART 2 |
Sills and Copings Part 2: Coping of Precast Concrete, Cast Stone, Clayware, Slate and Natural Stone |
|
BSI BS 6282 PART 1 |
Devices with Moving Parts for the Prevention of Contamination of Water by Backflow Part 1: Check Valves of Nominal Size up to and Including DN 54 |
|
BSI BS 7158 |
Plastics Inspection Chambers for Drains and Sewers - Specification |
|
BSI BS 8218 |
Code of Practice for Mastic Asphalt Roofing-Supersedes CP 144: Part 4: 1970; |
|
BSI BS 835 |
Asbestos-Cement Flue Pipes and Fittings, Heavy Quality-Amd 1; |
|
BSI BS EN 1015-3 |
Methods of test for mortar for masonry Part 3: Determination of consistence of fresh mortar (by flow table)-AMD 15419:November 17, 2004; AMD 16882: January 31, 2007 |
|
BSI BS EN 12094-10 |
Fixed firefighting systems Components for gas extinguishing systems Part 10: Requirements and test methods for pressure gauges and pressure switches |
|
BSI BS EN 12094-12 |
Fixed firefighting systems Components for gas extinguishing systems Part 12: Requirements and test methods for pneumatic alarm devices |
|
BSI BS EN 12158-1 |
Builders Hoists for Goods - Part 1: Hoists with Accessible Platforms |
|
BSI BS EN 12354-2 |
Building Acoustics - Estimation of Acoustic Performance of Buildings from the Performance of Elements - Part 2: Impact Sound Insulation between Rooms |
|
BSI BS EN 12566-1 |
Small Wastewater Treatment Systems for Up to 50 PT - Part 1: Prefabricated Septic Tanks-AMD 14918: January 30, 2004; |
|
BSI BS EN 12697-39 |
Bituminous mixtures Test methods for hot mix asphalt Part 39: Binder content by ignition |
|
BSI BS EN 12697-4 |
Bituminous mixtures Test methods for hot mix asphalt Part 4: Bitumen recovery: Fractionating column |
|
BSI BS EN 12813 |
Temporary works equipment Load bearing towers of prefabricated components Particular methods of structural design |
|
BSI BS EN 12966-1 |
Road vertical signs - Variable message traffic signs - Part 1: Product standard |
|
BSI BS EN 13141-2 |
Ventilation for buildings Performance testing of components/products for residential ventilation Part 2: Exhaust and supply air terminal devices |
|
BSI BS EN 14227-1 |
Hydraulically bound mixtures Specifications Part 1: Cement bound granular mixtures |
|
BSI BS EN 1543 |
Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of Tensile Strength Development for Polymers |
|
BSI BS EN 1863-1 |
Glass In Building - Heat Strengthened Soda Lime Silicate Glass - Part 1: Definition and Description |
|
BSI BS EN 433 |
Resilient Floor Coverings - Determination of Residual Indentation After Static Loading (R) |
|
BSI BS EN 474-8 |
Earth-Moving Machinery - Safety - Part 8: Requirements for Graders |
|
BSI BS EN 772-20 |
Methods of test for masonry units Part 20: Determination of flatness of faces of masonry units-AMD 15683: January 16, 2006 |
|
BSI BS EN 772-6 |
Methods of Test for Masonry Units - Part 6: Determination of Bending Tensile Strength of Aggregate Concrete Masonry Units |
|
BSI BS EN 832 |
Thermal Performance of Buildings - Calculation of Energy Use for Heating - Residential Buildings-CORR 11044: July 2001; |
|
BSI BS EN ISO 10545-11 |
Ceramic Tiles Part 11: Determination of Crazing Resistance for Glazed Tiles-Supersedes BS 6431: Part 17: 1983 |
|
BSI BS EN ISO 13793 |
Thermal Performance of Buildings - Thermal Design of Foundations to Avoid Frost Heave |
|
BSI BS ISO 12006-2 |
Building Construction - Organization of Information About Construction Works - Part 2: Framework for Classification of Information |
|
BSI DD 213 |
Method of Determination of the Indirect Tensile Stiffness Modulus of Bituminous Mixtures (R) |
|
BSI PD 6680 |
Guidance on the new European Standards for thermal insulation materials-Supersedes PD 6621: 1998; |
|
BSI BS 1187 |
Wood Blocks for Floors-AMD 21: June 15, 1968; |
|
BSI BS 1196 |
Clayware Field Drain Pipes and Junctions |
|
BSI BS 2655 PART 8 |
Lifts, Escalators, Passenger Conveyors and Paternosters Part 8: Modernization or Reconstruction of Lifts, Escalators and Paternosters-AMD 3019: May 31, 1979; Partially replaced by Parts 1, 11 and 12 of BS 5655; |
|
BSI BS 4154 PART 1 |
Corrugated Plastics Translucent Sheets Made from Thermo-Setting Polyester Resin (Glass Fibre Reinforced) Part 1: Material and Performance Requirements |
|
BSI BS 4508 PART 4 |
Thermally Insulated Under Ground Piping Systems Part 4: Specific Testing and Inspection Requirements for Cased Systems Without Air Gap |
|
BSI BS 4904 |
External Cladding Colours for Building Purposes |
|
BSI BS 7533-8 |
Pavements constructed with clay, natural stone, or concrete pavers Part 8: Guide for the structural design of lightly trafficked pavements of precast concrete flags and natural stone flags |
|
BSI BS 7542 |
Method of Test for Curing Compounds for Concrete |
|
BSI BS 7566-4 |
Installation of factory-made chimneys to BS 4543 for domestic appliances Part 4: Recommendations for installation design and installation-CORR 14210: March 18, 2003; |
|
BSI BS 7593 |
Code of practice for treatment of water in domestic hot water central heating systems |
|
BSI BS 7641 |
Performance Standards in Building - Definition and Calculation of Area and Space Indicators (ISO 9836: 1992) |
|
BSI BS EN 1015-1 |
Methods of Test for Mortar for Masonry - Part 1: Determination of Particle Size Distribution (By Sieve Analysis)-AMD 16884: January 31, 2007 |
|
BSI BS EN 1015-18 |
Methods of Test for Mortar for Masonry - Part 18: Determination of Water Absorption Coefficient Due to Capillary Action of Hardened Mortar |
|
BSI BS EN 1052-2 |
Methods of Test for Masonry - Part 2: Determination of Flexural Strength |
|
BSI BS EN 1052-3 |
Methods of Test for Masonry Part 3: Determination of Initial Shear Strength |
|
BSI BS EN 1143-2 |
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 2: Deposit systems-CORR 14417: April 17, 2003; |
|
BSI BS EN 12094-11 |
Fixed firefighting systems Components for gas extinguishing systems Part 11: Requirements and test methods for mechanical weighing devices |
|
BSI BS EN 1213 |
Building Valves - Copper Alloy Stopvalves for Potable Water Supply in Buildings - Tests and Requirements |
|
BSI BS EN 12697-28 |
Bituminous Mixtures - Test Methods for Hot Mix Asphalt - Part 28: Preparation of Samples for Determining Binder Content, Water Content and Grading |
|
BSI BS EN 12792 |
Ventilation for buildings Symbols, terminology and graphical symbols-Supersedes PD 6611: 1997; |
|
BSI BS EN 1288-1 |
Glass in Building - Determination of the Bending Strength of Glass - Part 1: Fundamentals of Testing Glass |
|
BSI BS EN 13084-2 |
Free-Standing Chimneys Part 2: Concrete Chimneys |
|
BSI BS EN 13124-2 |
Windows, doors and shutters Explosion resistance Test method Part 2: Range test |
|
BSI BS EN 13198 |
Precast concrete products Street furniture and garden products |
|
BSI BS EN 13241-1 |
Industrial, commercial and garage doors and gates Product standard Part 1: Products without fire resistance or smoke control characteristics-CORR 14656: September 12, 2003; |
|
BSI BS EN 13279-1 |
Gypsum binders and gypsum plasters Part 1: Definitions and requirements-CORR 16072: May 31, 2006; Together with BS EN 13279-2:2004 supersedes BS 1191-1:1973 and BS 1191-2:1975 |
|
BSI BS EN 13280 |
Glass Fibre Reinforced Cisterns of One-Piece and Sectional Construction, for the Storage, Above Ground, of Cold Water-Supersedes BS 7491-1:1991, -2:1992 and -3:1994; |
|
BSI BS EN 1352 |
Determination of Static Modulus of Elasticity under Compression of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure |
|
BSI BS EN 1365-4 |
Fire Resistance Tests for Loadbearing Elements - Part 4: Columns |
|
BSI BS EN 14277 |
Ventilation for buildings Air terminal devices Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes |
|
BSI BS EN 1608 |
Thermal Insulating Products for Building Applications - Determination of Tensile Strength Parallel to Faces-AMD 9747; November 15, 1997; |
|
BSI BS EN 1794-1 |
Road traffic noise reducing devices Non-acoustic performance Part 1: Mechanical performance and stability requirements |
|
BSI BS EN 1932 |
External Blinds and Shutters - Resistance to Wind Loads - Method of Testing |
|
BSI BS EN 325 |
Wood-Based Panels - Determination of Dimensions of Test Pieces (R) |
|
BSI BS EN 500-1 |
Mobile road construction machinery Safety Part 1: Common requirements |
|
BSI BS EN 62053-23 |
Electricity metering equipment (a.c.) Particular requirements Part 23: Static meters for reactive energy (classes 2 and 3)-CORR 15024: February 24, 2004 |
|
BSI BS EN 950 |
Door Leaves - Determination of the Resistance to Hard Body Impact |
|
BSI BS EN ISO 10545-15 |
Ceramic Tiles Part 15: Determination of Lead and Cadmium Given off by Glazed Tiles |
|
BSI BS EN ISO 13790 |
Thermal performance of buildings Calculation of energy use for space heating |
|
BSI BS EN ISO 1806 |
Fishing nets Determination of mesh breaking force of netting-Supersedes BS 4650:1970; |
|
BSI BS ISO 14654 |
Epoxy-Coated Steel for the Reinforcement of Concrete-Supersedes BS 7295-1: 1990; |
|
BSI CP 342 PART 2 |
Centralized Hot Water Supply Part 2: Buildings Other Than Individual Dwellings |
|
BSI BS 1421 |
Specification for Picks, Beater Picks and Mattocks |
|
BSI BS 1446 |
Mastic Asphalt (Natural Rock Asphalt Fine Aggregate) for Roads and Footways |
|
BSI BS 2081-1 |
Closets for Use with Chemicals - Part 1: Specifications for Portable Closets |
|
BSI BS 3136-2 |
Cold emulsion spraying machines for roads Part 2: Metric units |
|
BSI BS 4737 SEC 3.8 |
Intruder Alarm Systems in Buildings Part 3: Requirements for Detection Devices Section 3.8: Volumetric Capacitive Detectors-Amd 1; |
|
BSI BS 4737 SEC 5.2 |
Intruder Alarm Systems in Buildings Part 5: Terms and Symbols Section 5.2: Recommendations for Symbols for Diagrams |
|
BSI BS 5369 |
Methods of Testing Doors; Behaviour Under Humidity Variations of Door Leaves Placed in Successive Uniform Climates |
|
BSI BS 5502-21 |
Buildings and structures for agriculture Part 21: Code of practice for selection and use of construction materials-AMD 13577: June 10, 2003; Supersedes BS 5502 SEC 1.1:1986; Supersedes BS 5502 SEC 3.2:1978 |
|
BSI BS 5504 PART 2 |
Wall Hung WC Pan Part 2: Wall Hung WC Pan with Independent Water Supply. Connecting Dimensions (AMD 7318) October 15, 1992-Amd 1; |
|
BSI BS 5520 |
Vitreous China Bowl Urinals. Rimless Type-Amd 1; |
|
BSI BS 5821 PART 3 |
Method for Rating Sound Insulation in Buildings and of Building Elements Part 3: Method for Rating the Airborne Sound Insulation of Facade Elements and Facades |
|
BSI BS 644 |
Timber windows Factory assembled windows of various types Specification-Supersedes BS 644-1:1989, BS 644-2:1958 and BS 644-3:1951; |
|
BSI BS 7074 PART 1 |
Application, Selection and Installation of Expansion Vessels and Ancillary Equipment for Sealed Water Systems Part 1: Code of Practice for Domestic Heating and Hot Water Supply |
|
BSI BS 7655-1.5 |
Specifications for Insulating and seathing materials for cables - Part 1: Cross-linked elastomeric insulating compounds - Section 1.5: Flame retardant composites-AMD 16089: July 2006 |
|
BSI BS 7955 |
Containment Nets and Sheets on Construction Works - Specification for Performance and Test Methods |
|
BSI BS 8104 |
Code of Practice for Assessing Exposure of Walls to Wind-Driven Rain (AMD 8358) February 15, 1995 (R)-Amd 1; |
|
BSI BS EN 1096-4 |
Glass in building Coated glass Part 4: Evaluation of conformity/Product standard |
|
BSI BS EN 12046-1 |
Operating forces Test method Part 1: Windows-It partially supersedes BS 6375-2:1987; |
|
BSI BS EN 12109 |
Vacuum Drainage Systems Inside Buildings |
|
BSI BS EN 12589 |
Ventilation for Buildings - Air Terminal Units - Aerodynamic Testing and Rating of Constant and Variable Rate Terminal Units |
|
BSI BS EN 12667 |
Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Products of High and Medium Thermal Resistance-Together with BS EN 12664 and BS EN 12939 Supersedes BS 874-2.1:1986 and BS 874-2.2:1988; |
|
BSI BS EN 12697-20 |
Bituminous mixtures Test methods for hot mix asphalt Part 20: Indentation using cube or Marshall specimens |
|
BSI BS EN 12697-3 |
Bituminous mixtures Test methods for hot mix asphalt Part 3: Bitumen recovery: Rotary evaporator |
|
BSI BS EN 12697-40 |
Bituminous mixtures Test methods for hot mix asphalt Part 40: In situ drainability |
|
BSI BS EN 12697-41 |
Bituminous mixtures Test methods for hot mix asphalt Part 41: Resistance to de-icing fluids |
|
BSI BS EN 13141-6 |
Ventilation for buildings Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling |
|
BSI BS EN 13244-4 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage Polyethylene (PE) Part 4: Valves |
|
BSI BS EN 1353 |
Determination of Moisture Content of Autoclaved Aerated Concrete |
|
BSI BS EN 13785 |
Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures-Together with BS EN 13786:2004 it supersedes BS 3016:1989 |
|
BSI BS EN 13877-3 |
Concrete pavements Part 3: Specifications for dowels to be used in concrete pavements |
|
BSI BS EN 14991 |
Precast concrete products - Foundation elements |
|
BSI BS EN 1744-3 |
Tests for Chemical Properties of Aggregates - Part 3: Preparation of Eluates by Leaching of Aggregates |
|
BSI BS EN 1794-2 |
Road traffic noise reducing devices Non-acoustic performance Part 2: General safety and environmental requirements |
|
BSI BS EN 1863-2 |
Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard |
|
BSI BS EN 1931 |
Flexible Sheets for Waterproofing - Bitumen, Plastic and Rubber Sheets for Roof Waterproofing - Determination of Water Vapour Transmission Properties-CORR 13231: September 17, 2001; |
|
BSI BS EN 274-3 |
Waste Fitting for Sanitary Appliances Part 3: Quality Control-CORR 14958: February 10, 2004; Together with BS EN 274-1: 2002 and BS EN 274-2: 2002 Supersedes BS EN 274: 1993, BS EN 329: 1997, BS EN 411: 1995, BS 3380: 1982 and BS 3943: 1979 |
|
BSI BS EN 324-1 |
Wood-Based Panels - Determination of Dimensions of Boards Part 1: Determination of Thickness, Width and Length (R) |
|
BSI BS EN 326-1 |
Wood-Based Panels - Sampling, Cutting and Inspection Part 1: Sampling and Cutting of Test Pieces and Expression of Test Results (R) |
|
BSI BS EN 425 |
Resilient and Laminate Floor Coverings - Castor Chair Test |
|
BSI BS EN 595 |
Timber Structures - Test Methods - Test of Trusses for the Determination of Strength and Deformation Behaviour-Partially Replaces BS 5268: Part 3: 1985 |
|
BSI BS EN 822 |
Thermal Insulating Products for Building Applications - Determination of Length and Width (F) |
|
BSI BS EN 823 |
Thermal Insulating Products for Building Applications - Determination of Thickness (F) |
|
BSI BS EN 826 |
Thermal Insulating Products for Building Applications - Determination of Compression Behaviour |
|
BSI BS EN ISO 10052 |
Acoustics Field measurements of airborne and impact sound insulation and of service equipment sound Survey method |
|
BSI BS EN ISO 22476-2 |
Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing-CORR 16932: February 28, 2007 |
|
BSI CP 143 PART 12 |
Sheet Roof and Wall Coverings Part 12: Copper. Metric Units-Amd 2; |
|
BSI PAS 32-1 |
Specification for Examination and Test of New Lifts Before Putting into Service - Part 1: Electric Tractor Lifts |
|
BSI PD 6687 |
Background paper to the UK National Annexes to BS EN 1992-1 |
|
BSI PD CEN/TR 14788 |
Ventilation for buildings - Design and dimensioning of residential ventilation systems |
|
BSI PD ISO/TR 16765 |
Comparison of worldwide safety standards on lifts for firefighters |
|
BSI BS 1244-1 |
Metal Sinks for Domestic Purposes Part 1: Imperial Units with Metric Equivalents-AMD 1677: February 28, 1975; |
|
BSI BS 1982 PART 0 |
Fungal Resistance of Panel Products Made of or Containing Materials of Organic Origin Part 0: Guide to Methods for Determination |
|
BSI BS 3678 |
Access Hooks for Chimneys and Other High Structures in Steel (AMD 8079) February 15, 1994 (R)-Amd 1; |
|
BSI BS 4248 |
Supersulphated Cement |
|
BSI BS 5642 PART 1 |
Sills and Copings Part 1: Specification for Window Sills of Precast Concrete, Cast Stone, Clayware, Slate and Natural Stone |
|
BSI BS 598 PART 111 |
Sampling and Examination of Bituminous Mixtures for Roads and Other Paved Areas Part 111: Method for Determination of Resistance to Permanent Deformation of Bituminous Mixtures Subject to Unconfined Uniaxial Loading-Supersedes DD 185: 1990; |
|
BSI BS 6283 PART 4 |
Safety and Control Devices for Use in Hot Water Systems Part 4: Specification for Drop-Tight Pressure Reducing Valves of Nominal Size up to and Including DN 50 for Supply Pressures up to and Including 12 Bar |
|
BSI BS 6515 |
Polyethylene Damp-Proof Courses for Masonry-Amd 1; |
|
BSI BS 6543 |
Guide to Use of Industrial by-Products and Waste Materials in Building and Civil Engineering |
|
BSI BS 6913 PART 14 |
Operation and Maintenance of Earth-Moving Machinery Part 14: Specification for Lubrication Fittings - Grease-Gun Nozzles-ISO 6392-2: 1996; |
|
BSI BS 7036 PART 4 |
Code of Practice for Safety at Powered Doors for Pedestrian Use Part 4: Low Energy Swing Doors (R) |
|
BSI BS 7357 |
7.5 LWC Flushing Cisterns (R) |
|
BSI BS 8481 |
Design, preparation and application of internal gypsum, cement, cement and lime plastering systems - Specification |
|
BSI BS 8490 |
Guide to siphonic roof drainage systems |
|
BSI BS EN 1052-4 |
Methods of Test for Masonry - Part 4: Determination of Shear Strength Including Damp Proof Course |
|
BSI BS EN 1063 |
Glass in Building - Security Glazing - Testing and Classification of Resistance Against Bullet Attack |
|
BSI BS EN 1195 |
Timber Structures - Test Methods - Performance of Structural Floor Decking-AMD 9976; May 1998; |
|
BSI BS EN 12001 |
Conveying, spraying and placing machines for concrete and mortar Safety requirements |
|
BSI BS EN 12354-4 |
Building Acoustics - Estimation of Acoustic Performance of Buildings from the Performance of Elements - Part 4: Transmission of Indoor Sound to the Outside |
|
BSI BS EN 1264-4 |
Floor Heating - Systems and Components - Part 4: Installation |
|
BSI BS EN 12697-19 |
Bituminous mixtures Test methods for hot mix asphalt Part 19: Permeability of specimen |
|
BSI BS EN 12697-43 |
Bituminous mixtures Test methods for hot mix asphalt Part 43: Resistance to fuel |
|
BSI BS EN 12716 |
Execution of Special Geotechnical Works - Jet Grouting |
|
BSI BS EN 13055-2 |
Lightweight aggregates Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
|
BSI BS EN 13108-20 |
Bituminous mixtures Material specifications Part 20: Type Testing |
|
BSI BS EN 13124-1 |
Windows, Doors and Shutters - Explosion Resistance - Test Method - Part 1: Shock Tube |
|
BSI BS EN 13161 |
Natural Stone Test Methods - Determination of Flexural Strength under Constant Moment |
|
BSI BS EN 13224 |
Precast concrete products Ribbed floor elements-AMD 15922: March, 2006 |
|
BSI BS EN 13286-47 |
Unbound and hydraulically bound mixtures Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling |
|
BSI BS EN 1366-7 |
Fire resistance tests for service installations Part 7: Conveyor systems and their closures |
|
BSI BS EN 1453-1 |
Plastics Piping Systems with Structured-Wall Pipes for Soil and Waste Discharge (Low and High Temperature) Inside Buildings - Unplasticized Poly(Vinyl Chloride) (PVC-U) - Part 1: Specifications for Pipes and the System |
|
BSI BS EN 14647 |
Calcium aluminate cement - Composition, specifications and conformity criteria-CORR 16970: February 28, 2007 |
|
BSI BS EN 14731 |
Execution of special geotechnical works Ground treatment by deep vibration |
|
BSI BS EN 33 |
Pedestal W.C. pans with close-coupled flushing cistern Connecting dimensions-CORR 16151: June 2006 |
|
BSI BS EN 427 |
Resilient Floor Coverings - Determination of the Side Length, Squareness and Straightness of Tiles (R) |
|
BSI BS EN 772-14 |
Methods of Test for Masonry Units - Part 14: Determination of Moisture Movement of Aggregate Concrete and Manufactured Stone Masonry Units |
|
BSI BS EN ISO 10545-6 |
Ceramic Tiles Part 6: Determination of Resistance to Deep Abration for Unglazed Tiles |
|
BSI BS EN ISO 10545-7 |
Ceramic Tiles - Part 7: Determination of Resistance to Surface Abrasion for Glazed Tiles-Supersedes BS 6431-20: 1984; |
|
BSI DD ENV 1090-6 |
Execution of Steel Structures - Part 6: Supplementary Rules for Stainless Steel |
|
BSI DD ISO/TS 22559-1 |
Safety requirements for lifts (elevators) Part 1: Global safety requirements (GESR's) for lifts (elevators) |
|
BSI PAS 24-1 |
Enhanced security performance requirements for door assemblies - Part 1: Single and double leaf, hinged external door assemblies to dwellings-AMD 10972: April, 2000; AMD 13943: July 10, 2003; AMD 16108: November 30, 2005; CORR 16144: December 16, 2005; AMD 16981: February 28, 2007 |
|
BSI PAS 32-2 |
Specification for Examination and Test of New Lifts Before Putting into Service - Part 2: Hydraulic Lifts |
|
BSI BS 1245 |
Metal Door Frames (Steel) |
|
BSI BS 1567 |
Wood Door Frames and Linings-Amd 6; |
|
BSI BS 4035 |
Linear Measuring Instruments for Use on Building and Civil Engineering Constructional Works. Steel Measuring Tapes, Steel Bands and Retractable Steel Pocket Rules-Amd 1; |
|
BSI BS 5502-25 |
Buildings and Structures for Agriculture - Part 25: Code of Practice for Design and Installation of Services and Facilities-AMD 13545: May 24, 2002; Supersedes BS 5502: Part 1: Section 1.5: 1978; |
|
BSI BS 5528 |
Operator's Controls on Excavators Used for Earth Moving-Amd 1; |
|
BSI BS 5834 PART 1 |
Surface Boxes and Guards for Underground Stopvalves for Gas and Waterworks Purposes Part 1: Guards, Including Foundation Units |
|
BSI BS 5834 PART 3 |
Surface Boxes and Guards for Underground Stopvalves for Gas and Waterworks Purposes Part 3: Large Surface Boxes |
|
BSI BS 598-112 |
Sampling and examination of bituminous mixtures for roads and other paved areas Part 112: Method for the use of road surface hardness probe |
|
BSI BS 6263 PART 2 |
Care and Maintenance of Floor Surfaces Part 2: Code of Practice for Resilient Sheet and Tile Flooring |
|
BSI BS 6264 |
Procedure for Operator Training for Earth- Moving Machinery |
|
BSI BS 6336 |
Guide to the Development of Fire Tests, the Presentation of Test Data and the Role of Tests in Hazard Assessment |
|
BSI BS 6340 PART 2 |
Shower Units Part 2: Installation of Shower Units |
|
BSI BS 6340 PART 5 |
Shower Units Part 5: Prefabricated Shower Trays Made from Acrylic Material (AMD 5913) May 31, 1989-Amd 2; |
|
BSI BS 6583 |
Methods for Volumetric Testing for Rating of Fan Sections in Central Station Air Handling Units (Including Guidance on Rating) |
|
BSI BS 6611 |
Evaluation of the Response of Occupants of Fixed Structures, Especially Buildings and Offshore Structures, to Low-Frequency Horizontal Motion (0.063 Hz to 1 Hz) |
|
BSI BS 7334 PART 2 |
Measuring Instruments for Building Construction Part 2: Methods for Determining Accuracy in Use: Measuring Tapes (AMD 9318) November 15, 1996 (R)-Amd 1; |
|
BSI BS 7533-10 |
Pavements constructed with clay, natural stone or concrete pavers Part 10: Guide for the structural design of trafficked pavements constructed of natural stone setts |
|
BSI BS EN 1015-17 |
Methods of test for mortar for masonry Part 17: Determination of water-soluble chloride content of fresh mortars-AMD 15418:November 30, 2004 |
|
BSI BS EN 12272-3 |
Surface dressing Test method Part 3: Determination of binder aggregate adhesivity by the Vialit plate shock test method |
|
BSI BS EN 1264-1 |
Floor Heating - Systems and Components Part 1: Definitions and Symbols |
|
BSI BS EN 1264-2 |
Floor Heating - Systems and Components Part 2: Determination of the Thermal Output |
|
BSI BS EN 12676-1 |
Anti-Glare Systems for Roads - Part 1: Performance and Characteristics-AMD 14516: July 11, 2003; |
|
BSI BS EN 12697-10 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactibility-CORR 17052: March 30, 2007 |
|
BSI BS EN 12697-27 |
Bituminous Mixtures - Test Methods for Hot Mix Asphalt - Part 27: Sampling |
|
BSI BS EN 12697-36 |
Bituminous mixtures Test methods for hot mix asphalt Part 36: Determination of the thickness of a bituminous pavement |
|
BSI BS EN 12737 |
Precast concrete products Floor slats for livestock |
|
BSI BS EN 1288-3 |
Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending) |
|
BSI BS EN 13049 |
Windows - Soft and heavy body impact - Test method, safety requirements and classification |
|
BSI BS EN 13051 |
Curtain Walling - Watertightness - Site Test |
|
BSI BS EN 13108-21 |
Bituminous mixtures Material specifications Part 21: Factory Production Control |
|
BSI BS EN 13119 |
Curtain walling - Terminology |
|
BSI BS EN 13123-2 |
Windows, doors, and shutters Explosion resistance Requirements and classification Part 2: Range test |
|
BSI BS EN 13142 |
Ventilation for buildings Components/products for residential ventilation Required and optional performance characteristics |
|
BSI BS EN 13244-3 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage Polyethylene (PE) Part 3: Fittings |
|
BSI BS EN 13285 |
Unbound Mixtures - Specification |
|
BSI BS EN 13286-2 |
Unbound and hydraulically bound mixtures Part 2: Test methods for the determination of the laboratory reference density and water content Proctor compaction |
|
BSI BS EN 13305 |
Bitumen and bituminous binders - Framework of specification of hard industrial bitumens |
|
BSI BS EN 1354 |
Determination of compressive strength of lightweight aggregate concrete with open structure |
|
BSI BS EN 13893 |
Resilient, laminate and textile floor coverings Measurement of dynamic coefficient of friction on dry floor surfaces |
|
BSI BS EN 14068 |
Products and systems for the protection and repair of concrete structures Test methods Determination of watertightness of injected cracks without movement in concrete |
|
BSI BS EN 14134 |
Ventilation for buildings Performance testing and installation checks of residential ventilation systems |
|
BSI BS EN 14227-3 |
Hydraulically bound mixtures Specifications Part 3: Fly ash bound mixtures |
|
BSI BS EN 14227-4 |
Hydraulically bound mixtures Specifications Part 4: Fly ash for hydraulically bound mixtures |
|
BSI BS EN 14227-5 |
Hydraulically bound mixtures Specifications Part 5: Hydraulic road binder bound mixtures |
|
BSI BS EN 14449 |
Glass in building Laminated glass and laminated safety glass Evaluation of conformity/Product standard |
|
BSI BS EN 14540 |
Fire-fighting hoses Non-percolating layflat hoses for fixed systems |
|
BSI BS EN 14629 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete |
|
BSI BS EN 1544 |
Products and systems for the protection and repair of concrete structures Test methods Determination of creep under sustained tensile load for synthetic resin products (PC) for anchoring of reinforcing bars |
|
BSI BS EN 1604 |
Thermal Insulating Products for Building Applications - Determination of Dimensional Stability Under Specified Temperature and Humidity Conditions-AMD 9743: November 15, 1997; AMD 16797: January 31, 2007 |
|
BSI BS EN 1605 |
Thermal Insulating Products for Building Applications - Determination of Deformation Under Specified Compressive Load and Temperature Conditions-AMD 9744: November 15, 1997; AMD 16795: January 31, 2007 |
|
BSI BS EN 1852-1 |
Plastic piping systems for non-pressure underground drainage and sewerage Polypropylene (PP) Part 1: Specifications for pipes, fittings and the system-AMD 14514: August 6, 2003; |
|
BSI BS EN 1928 |
Flexible Sheets for Waterproofing - Bitumen, Plastic and Rubber Sheets for Roof Waterproofing - Determination of Watertightness |
|
BSI BS EN 303-3 |
Heating boilers Part 3: Gas-fired central heating boilers Assembly comprising a boiler body and a forced draught burner-AMD 15305:September 3, 2004; CORR 16503: July 31, 2006 |
|
BSI BS EN 442-3 |
Radiators and convectors Part 3: Evaluation of conformity |
|
BSI BS EN 4533-004 |
Aerospace series Fibre optic systems Handbook Part 004: Repair, maintenance and inspection |
|
BSI BS EN 534 |
Corrugated bitumen sheets Product specification and test methods |
|
BSI BS EN 61821 |
Electrical installations for lighting and beaconing of aerodromes Maintenance of aeronautical ground lighting constant current series circuits |
|
BSI BS EN 673 |
Glass in building Determination of thermal transmittance (U value) Calculation method-AMD 14300: April 11, 2003; Supersedes BS 6993 Part 1:1989 |
|
BSI BS EN 772-10 |
Methods of Test for Masonry Units - Part 10: Determination of Moisture Content of Calcium Silicate and Autoclaved Aerated Concrete Units |
|
BSI BS EN 816 |
Sanitary Tapware - Automatic Shut-Off Valves PN 10 |
|
BSI BS EN 845-3 |
Specification for ancillary components for masonry Part 3: Bed joint reinforcement of steel meshwork |
|
BSI BS EN ISO 10848-2 |
Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 2: Application to light elements when the junction has a small influence-Supersedes BS EN 20140-9:1994 and BS EN ISO 140-12:2000 |
|
BSI BS ISO 14656 |
Epoxy Powder and Sealing Material for the Coating of Steel for the Reinforcement of Concrete-Supersedes BS 7295-2: 1990; |
|
BSI BS 1566-1 |
Copper Cylinders for Domestic Purposes Part 1: Open Vented Copper Cylinders Requirements and Test Methods-Supersedes BS 699: 1984 and BS 699: 1984; |
|
BSI BS 3198 |
Copper hot water storage combination units for domestic purposes-AMD 6599: September 1990; Reprinted incorporating Amendment Nos. 1 and 2; |
|
BSI BS 3470 |
Field Gates and Posts |
|
BSI BS 3690 PART 3 |
Bitumens for Building and Civil Engineering Part 3: Mixtures of Bitumen with Pitch, Tar and Trinidad Lake Asphalt |
|
BSI BS 5502 PART 43 |
Buildings and Structures for Agriculture Part 43: Code of Practice for Design and Construction of Poultry Buildings (AMD 9237) September 15, 1996 (R)-Amd 1; |
|
BSI BS 567 |
Asbestos-Cement Flue Pipes and Fittings, Light Quality (AMD 5963) April 28, 1989-Amd 1; |
|
BSI BS 5803-5 |
Thermal Insulation for Pitched Roof Spaces in Dwellings Part 5: Specification for Installation of Man-Made Mineral Fibre and Cellulose Fibre Insulation-AMD 8040: Febuary 15,1994 |
|
BSI BS 5964 PART 2 |
Building Setting out and Measurement Part 2: Measuring Stations and Targets (ISO 4463-2: 1995) (R) |
|
BSI BS 5964 PART 3 |
Building Setting-Out and Measurement Part 3: Check-Lists for the Procurement of Surveys and Measurement Services (ISO 4463-3: 1995) (R) |
|
BSI BS 6340 PART 8 |
Shower Units Part 8: Prefabricated Shower Trays Made from Glazed Ceramic |
|
BSI BS 6457 |
Reconstructed Stone Masonry Units |
|
BSI BS 7834 |
Turbine Meters Used for the Measurement of Gas Flow in Closed Conduits (ISO 9951: 1993) (R) |
|
BSI BS 8221-1 |
Code of Practice for Cleaning and Surface Repair of Buildings - Part 1: Cleaning of Natural Stones, Brick, Terracotta and Concrete-Together with Part 2, It Supersedes BS 6270-1: 1982 and BS 6270-2: 1985; |
|
BSI BS 8411 |
Code of practice for safety nets on construction sites and other works |
|
BSI BS EN 1015-6 |
Methods of Test for Mortar for Masonry - Part 6: Determination of Bulk Density of Fresh Mortar-AMD 16877: January 31, 2007 |
|
BSI BS EN 111 |
Wall-hung hand rinse basins Connecting dimensions |
|
BSI BS EN 12159 |
Builders Hoists for Persons and Materials with Vertically Guided Cages |
|
BSI BS EN 12365-1 |
Building hardware Gasket and weatherstripping for doors, windows, shutters and curtain walling Part 1: Performance requirements and classification |
|
BSI BS EN 12365-2 |
Building hardware Gasket and weatherstripping for doors, windows, shutters and curtain walling Part 2: Linear compression force test methods |
|
BSI BS EN 12371 |
Natural Stone Test Methods - Determination of Frost Resistance |
|
BSI BS EN 12407 |
Natural Stone Test Methods - Petrographic Examination |
|
BSI BS EN 12615 |
Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of Slant Shear Strength-Supersedes BS 6319-4: 1984; |
|
BSI BS EN 12697-32 |
Bituminous mixtures Test methods for hot mix asphalt Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor |
|
BSI BS EN 12697-38 |
Bituminous mixtures Test methods for hot mix asphalt Part 38: Common equipment and calibration |
|
BSI BS EN 1288-5 |
Glass in Building - Determination of the Bending Strength of Glass - Part 5: Coaxial Double Ring Test on Flat Specimens with Small Test Surface Areas |
|
BSI BS EN 12970 |
Mastic Asphalt for Waterproofing - Definitions, requirements and Test Methods |
|
BSI BS EN 13108-4 |
Bituminous mixtures Material specifications Part 4: Hot Rolled Asphalt |
|
BSI BS EN 13116 |
Curtain Walling - Resistance to Wind Load - Performance Requirements |
|
BSI BS EN 13579 |
Products and systems for the protection and repair of concrete structures Test methods Drying test for hydrophobic impregnation |
|
BSI BS EN 13808 |
Bitumen and bituminous binders Framework for specifying cationic bituminous emulsions |
|
BSI BS EN 13892-2 |
Methods of test for screed materials Part 2: Determination of flexural and compressive strength |
|
BSI BS EN 14216 |
Cement Composition, specifications and conformity criteria for very low heat special cements |
|
BSI BS EN 14227-10 |
Hydraulically bound mixtures Specifications Part 10: Soil treated by cement |
|
BSI BS EN 14236 |
Ultrasonic domestic gas meters |