|
BSI BS EN 14488-2 |
Testing sprayed concrete Part 2: Compressive strength of young sprayed concrete |
|
BSI BS EN 1456-1 |
Plastic Piping Systems for Buried and Above-Ground Drainage and Sewerage under Pressure - Unplasticized Poly(Vinyl Chloride) (PVC-U) - Part 1: Specifications for Piping Components and the System |
|
BSI BS EN 14651 |
Test method for metallic fibered concrete Measuring the flexural tensile strength (limit of proportionality (LOP), residual) |
|
BSI BS EN 14801 |
Conditions for pressure classification of products for water and wastewater pipelines |
|
BSI BS EN 1491 |
Building Valves - Expansion Valves - Tests and Requirements-Supersedes BS 6283-1:1991; |
|
BSI BS EN 1527 |
Building Hardware - Hardware for Sliding Doors and Folding Doors - Requirements and Test Methods |
|
BSI BS EN 1671 |
Pressure Sewerage Systems Outside Buildings |
|
BSI BS EN 1737 |
Determination of Shear Strength of Welded Joints of Reinforcement Mats or Cages for Prefabricated Components Made of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure |
|
BSI BS EN 1740 |
Performance Test for Prefabricated Reinforced Components Made of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure under Predominantly Longitudinal Load (Vertical Components) |
|
BSI BS EN 1824 |
Road Marking Materials - Road Trials-CORR 10463: April 15, 1999; |
|
BSI BS EN 1846-3 |
Firefighting and rescue service vehicles Part 3: Permanently installed equipment Safety and performance |
|
BSI BS EN 323 |
Wood-Based Panels - Determination of Density (R) |
|
BSI BS EN 474-9 |
Earth-moving machinery - Safety - Part 9: Requirements for pipelayers |
|
BSI BS EN 483 |
Gas-fired central heating boilers Type C boilers of nominal heat input not exceeding 70 kW-AMD 13369: February 13,2002; CORR 16504: August 31, 2006; Partially Supersedes BS 5258-1:1986 and BS 6332-1:1988 |
|
BSI BS EN 596 |
Timber Structures - Test Methods - Soft Body Impact Test of Timber Framed Walls |
|
BSI BS EN 825 |
Thermal Insulating Products for Building Applications - Determination of Flatness (F) |
|
BSI BS EN ISO 13786 |
Thermal Performance of Building Components - Dynamic Thermal Characteristics - Calculation Methods |
|
BSI BS EN ISO 6683 |
Earth-moving machinery Seat belts and seat belt anchorages Performance requirements and tests |
|
BSI BS EN ISO 8339 |
Building construction Sealants Determination of tensile properties (Extension to break)-Supersedes BS EN 28339: 1991 |
|
BSI BS ISO 15928-1 |
Houses Description of performance Part 1: Structural safety |
|
BSI DD 222 |
Specification for Rack and Pinion Lifts (R) |
|
BSI DD 229 |
Method for Determination of the Relative Hydraulic Conductivity of Permeable Surfacings (R) |
|
BSI DD CEN/TS 1456-2 |
Plastics piping systems for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinylchloride) (PVC-U) Part 2: Guidance for the assessment of conformity |
|
BSI DD ENV 1317-4 |
Road Restraint Systems - Part 4: Performance Classes, Impact Test Acceptance Criteria and Test Methods for Terminals and Transitions of Safety Barriers |
|
BSI BS 1206 |
Fireclay Sinks. Dimensions and Workmanship-AMD 2023: April 28, 1989; AMD 4916: April 28, 1989 |
|
BSI BS 1982 PART 2 |
Fungal Resistance of Panel Products Made of or Containing Materials of Organic Origin Part 2: Method for Determination of Resistance to Cellulose- Decomposing Microfungi |
|
BSI BS 2081-2 |
Closets for Use with Chemicals - Part 2: Specifications for Permanently Installed Closets |
|
BSI BS 4305 PART 1 |
Baths for Domestic Purposes Made of Acrylic Material Part 1: Finished Baths |
|
BSI BS 4880 PART 1 |
Urinals Part 1: Stainless Steel Slab Urinals-Amd 1; |
|
BSI BS 5578 PART 2 |
Building Construction. Stairs Part 2: Modular Coordination. Specification for Coordinating Dimensions for Stairs and Stair Openings |
|
BSI BS 6282 PART 2 |
Devices with Moving Parts for the Prevention of Contamination of Water by Backflow Part 2: Terminal Anti- Vacuum Valves of Nominal Size up to and Including DN 54 |
|
BSI BS 6282 PART 4 |
Devices with Moving Parts for the Prevention of Contamination of Water by Backflow Part 4: Combined Check and Anti-Vacuum Valves of Nominal Size up to and Including DN 42 |
|
BSI BS 6767-2 |
Transportable Accommodation Units Part 2: Recommendations for Design and Installation of Services and Fittings with Guidance on Transportation, Siting and Aspects Relating to Habitation-Supersedes BS 6492-2: 1995; |
|
BSI BS 6770 |
Guide for Exterior Colours for Park Homes (Mobile Homes), Holiday Caravans and Transportable Accommodation Units |
|
BSI BS 690 PART 6 |
Asbestos-Cement Slates and Sheets Part 6: Fittings for Use with Corrugated Sheets (AMD 5487) July 31, 1989-Amd 1; |
|
BSI BS 6954 PART 3 |
Tolerances for Building Part 3: Recommendations for Selecting Target Size and Predicting Fit |
|
BSI BS 7005 |
Design and Manufacture of Carbon Steel Unfired Pressure Vessels for Use in Vapour Compression Refrigeration Systems |
|
BSI BS 7036 PART 5 |
Code of Practice for Safety at Powered Doors for Pedestrian Use Part 5: Revolving Doors (R) |
|
BSI BS 7307 PART 1 |
Building Tolerances: Measurement of Buildings and Building Products Part 1: Methods and Instruments-AMD 9316 December 15, 1996; ISO 7976-1: 1989 |
|
BSI BS 7334 PART 6 |
Measuring Instruments for Building Construction Part 6: Methods for Determining Accuracy in Use of Laser Instruments (ISO 8322-6: 1991) |
|
BSI BS 7939 |
Smoke Security Devices - Code of Practice for Manufacture, Installation and Maintenance |
|
BSI BS EN 12051 |
Building Hardware - Door and Window Bolts - Requirements and Test Methods |
|
BSI BS EN 12211 |
Windows and Doors - Resistance to Wind Load - Test Methods-Supersededs by BS 5368-3:1978 |
|
BSI BS EN 12618-2 |
Products and systems for the protection and repair of concrete structures Test methods Part 2: Determination of the adhesion of injection products, with or without thermal cycling Adhesion by tensile bond strength |
|
BSI BS EN 12618-3 |
Products and systems for the protection and repair of concrete structures Test methods Part 3: Determination of the adhesion of injection products, with or without thermal cycling Slant shear method |
|
BSI BS EN 12676-2 |
Anti-Glare Systems for Roads - Part 2: Test Methods |
|
BSI BS EN 12697-2 |
Bituminous mixtures Test methods for hot mix asphalt Part 2: Determination of particle size distribution |
|
BSI BS EN 1288-2 |
Glass in Building - Determination of the Bending Strength of Glass - Part 2: Coaxial Double Ring Test on Flat Specimens with Large Test Surface Areas |
|
BSI BS EN 1288-4 |
Glass in Building - Determination of the Bending Strength of Glass - Part 4: Testing of Channel Shaped Glass |
|
BSI BS EN 13030 |
Ventilation for Buildings - Terminals - Performance Testing of Louvres Subjected to Simulated Rain |
|
BSI BS EN 13108-6 |
Bituminous mixtures Material specifications Part 6: Mastic Asphalt |
|
BSI BS EN 13108-8 |
Bituminous mixtures Material specifications Part 8: Reclaimed asphalt |
|
BSI BS EN 13141-1 |
Ventilation for buildings Performance testing of components/products for residential ventilation Part 1: Externally and internally mounted air transfer devices |
|
BSI BS EN 13141-3 |
Ventilation for buildings Performance testing of components/products for residential ventilation Part 3: Range hoods for residential use |
|
BSI BS EN 13244-5 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage Polyethylene (PE) Part 5: Fitness for purpose of the system |
|
BSI BS EN 1365-2 |
Fire Resistance Tests for Loadbearing Elements - Part 2: Floors and Roofs |
|
BSI BS EN 13724 |
Postal services Apertures of private letter boxes and letter plates Requirements and test methods-Supersedes BS 2911: 1974; |
|
BSI BS EN 13755 |
Natural Stone Test Methods - Determination of Water Absorption at Atmospheric Pressure-Corrigendum 15148: May 5, 2004 |
|
BSI BS EN 13830 |
Curtain walling Product standard |
|
BSI BS EN 13892-6 |
Methods of test for screed materials Part 6: Determination of surface hardness |
|
BSI BS EN 13978-1 |
Precast concrete products Precast concrete garages Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions |
|
BSI BS EN 14227-11 |
Hydraulically bound mixtures Specifications Part 11: Soil treated by lime |
|
BSI BS EN 14227-2 |
Hydraulically bound mixtures Specifications Part 2: Slag bound mixtures |
|
BSI BS EN 14474 |
Precast concrete products Concrete with wood-chips as aggregate Requirements and test methods |
|
BSI BS EN 14488-7 |
Testing sprayed concrete Part 7: Fibre content of fibre reinforced concrete |
|
BSI BS EN 14518 |
Ventilation for buildings Chilled beams Testing and rating of passive chilled beams |
|
BSI BS EN 14693 |
Flexible sheets for waterproofing Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles Determination of the behaviour of bitumen sheets during application of mastic asphalt |
|
BSI BS EN 1520 |
Prefabricated reinforced components of lightweight aggregate concrete with open structure-CORR 14549: August 28, 2003; |
|
BSI BS EN 1745 |
Masonry and masonry products Methods for determining design thermal values |
|
BSI BS EN 2511 |
Aluminium alloy AL-P7075-T7351 Plate 6 mm less than a less than or equal to 100 mm |
|
BSI BS EN 303-2 |
Heating boilers Part 2: Heating boilers with forced draught burners Special requirements for boilers with atomizing oil burners-AMD 15311:September 15, 2004 |
|
BSI BS EN 31 |
Pedestal Wash Basins - Connecting Dimensions-Supersedes BS 5506-1: 1977; |
|
BSI BS EN 320 |
Fibreboards - Determination of Resistance to Axial Withdrawal of Screws (R) |
|
BSI BS EN 326-3 |
Wood-Based Panels - Sampling, Cutting and Inspection Part 3: Inspection of a Isolated Lot of Panels |
|
BSI BS EN 382-1 |
Fibreboards - Determination of Surface Absorption Part 1: Test Method for Dry Process Fibreboards (R) |
|
BSI BS EN 382-2 |
Fibreboards - Determination of Surface Absorption Part 2: Test Method for Hardboards (R) |
|
BSI BS EN 459-2 |
Building lime - Part 2: Test methods-CORR 14098: September 13, 2002; |
|
BSI BS EN 474-11 |
Earth-Moving Machinery - Safety Part 11: Requirements for Earth and Landfill Compactors |
|
BSI BS EN 50379-2 |
Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances Part 2: Performance requirements for apparatus used in statutory inspections and assessment |
|
BSI BS EN 517 |
Prefabricated accessories for roofing Roof safety hooks |
|
BSI BS EN 61773 |
Overhead Lines - Testing of Foundations for Structures-IEC 61773: 1996; |
|
BSI BS EN 62053-61 |
Electricity Metering Equipment (a.c.) - Partricular Requirements - Part 61: Power Consumption and Voltage Requirements-IEC 62053-61: 1998; |
|
BSI BS EN 947 |
Hinged or Pivoted Doors - Determination of the Resistance to Vertical Load |
|
BSI BS EN ISO 22476-3 |
Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test-CORR 16931: February 28, 2007 |
|
BSI BS EN ISO 3822-1 |
Acoustics - Laboratory Tests on Noise Emission from Appliances and Equipment Used in Water Supply Installations - Part 1: Method of Measurement-Supersedes BS 6864-1: 1987; |
|
BSI BS EN ISO 6682 |
Earth-Moving Machinery - Zones of Comfort and Reach for Controls (AMD 8711) July 15, 1995 (Formerly BS 6124: 1987. Replaces BS 6124: 1981) (R)-Amd 2; |
|
BSI BS ISO TR 5925-2 |
Fire Tests - Smoke Control Door and Shutter Assemblies Part 2: Commentary on Test Method and Test Data Application |
|
BSI DD ENV 13282 |
Hydraulic Road Binders - Composition, Specifications and Conformity Criteria-CORR 13065: December 4, 2001; |
|
BSI PD 6512 PART 3 |
Use of Elements of Structural Protection with Particular Reference to the Recommendations Given in BS 5588 Fire Precautions in the Design and Construction of Buildings Part 3: to the Fire Performance of Glass |
|
BSI PD 6682-2 |
Aggregates Part 2: Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas Guidance on the use of BS EN 13043 |
|
BSI PD ISO/TR 14799-2 |
Comparison of Worldwide Escalator and Moving Walk Safety Standards - Part 2: Abbreviated Comparison and Comments |
|
BSI BS 1566-2 |
Copper Indirect Cylinders for Domestic Purposes Part 2: Single Feed Indirect Cylinders-AMD 6601: September 28, 1990; |
|
BSI BS 1982 PART 1 |
Fungal Resistance of Panel Products Made of or Containing Materials of Organic Origin Part 1: Method for Determination of Resistance to Wood- Rotting Basidiomycetes (AMD 7780) June 15, 1993 (R)-Amd 1; |
|
BSI BS 1982 PART 3 |
Fungal Resistance of Panel Products Made of or Containing Materials of Organic Origin Part 3: Methods for Determination of Resistance to Mould or Mildew |
|
BSI BS 2760 |
Pitch-Impregnated Fibre Pipes and Fittings for Below and Above Ground Drainage (AMD 2675) June 30, 1978 (R)-Amd 1; |
|
BSI BS 2995 |
SPECIFICATION FOR CAST AND FORGED STEEL WEDGE GATE, GLOBE, CHECK AND PLUG VALVES SCREWED AND SOCKET-WELDING 0 SIZES 2 IN AND SMALLER FOR THE PETROLEUM INDUSTRY |
|
BSI BS 3376 |
Open Fires Burning Solid Mineral Fuels with Convection, with or without Boilers (R) |
|
BSI BS 3690 PART 2 |
Bitumens for Building and Civil Engineering Part 2: Bitumens for Industrial Purposes |
|
BSI BS 4484 PART 1 |
Measuring Instruments for Constructional Works Part 1: Metric Graduation and Figuring of Instruments for Linear Measurement |
|
BSI BS 4729 |
Clay and calcium silicate bricks of special shapes and sizes Recommendations |
|
BSI BS 4737 SEC 4.3 |
Intruder Alarm Systems in Buildings Part 4: Codes of Practice Section 4.3: Code of Practice for Exterior Alarm Systems |
|
BSI BS 5502 PART 32 |
Buildings and Structures for Agriculture Part 32: Guide to Noise Attenuation-AMD 9086: March 15, 1996; |
|
BSI BS 598-109 |
Sampling and Examination of Bituminous Mixtures for Roads and Other Paved Areas - Part 109: Methods for the Assessment of the Compaction Performance of a Roller and Recommended Procedures for the Measurement of the Temperature of Bituminous Mixtures-AMD 10735; June 2000; Revision of Clause 9 and Appendix A of BS 598-3: 1985; |
|
BSI BS 6485 |
PVC-Covered Conductors for Overhead Power Lines |
|
BSI BS 6571 PART 2 |
Vehicle Parking Control Equipment Part 2: Specification for Electrically Powered Parking Meters (AMD 8284) March 15, 1995 (R)-Amd 2; |
|
BSI BS 6911-13 |
Testing Earth-Moving Machinery - Part 13: Methods of Measuring the Masses of Whole Machines, Their Equipment and Components-ISO 6016: 1998; |
|
BSI BS 6954 PART 2 |
Tolerances for Building Part 2: Recommendations for Statistical Basis for Predicting Fit Between Components Having a Normal Distribution of Sizes |
|
BSI BS 8408 |
Road traffic signs Testing and performance of microprismatic retroreflective sheeting materials Specification-CORR 15899: July 28, 2005 |
|
BSI BS CEN/TS 1793-5 |
Road traffic noise reducing devices Test method for determining the acoustic performance Part 5: Intrinsic characteristics - In situ values of sound reflection and airborne sound insulation |
|
BSI BS EN 12274-3 |
Slurry Surfacing - Test Methods - Part 3: Consistency |
|
BSI BS EN 12311-2 |
Flexible Sheets for Waterproofing - Determination of Tensile Properties - part 2: Plastic and Rubber Sheets for Roof Waterproofing |
|
BSI BS EN 12354-6 |
Building Acoustics Estimation of acoustic performance of buildings from the performance of elements Part 6: Sound absorption in enclosed spaces |
|
BSI BS EN 1253-3 |
Gullies for Buildings - Part 3: Quality Control |
|
BSI BS EN 12697-25 |
Bituminous mixtures Test methods for hot mix asphalt Part 25: Cyclic compression test |
|
BSI BS EN 12697-8 |
Bituminous mixtures Test methods for hot mix asphalt Part 8: Determination of void characteristics of bituminous specimens |
|
BSI BS EN 12831 |
Heating systems in buildings Method for calculation of the design heat load-Partially supersedes BS 5449: 1990; |
|
BSI BS EN 13084-7 |
Free-standing chimneys Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners |
|
BSI BS EN 13180 |
Ventilation for Buildings - Ductwork - Dimensions and Mechanical for Flexible Ducts |
|
BSI BS EN 13213 |
Hollow Floors |
|
BSI BS EN 13286-4 |
Unbound and hydraulically bound mixtures Part 4: Test methods for laboratory reference density and water content Vibrating hammer |
|
BSI BS EN 13294 |
Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of Stiffening Time |
|
BSI BS EN 13318 |
Screed Materials and Floor Screeds - Definitions |
|
BSI BS EN 1343 |
Kerbs of Natural Stone for External Paving - Requirements and Test Methods |
|
BSI BS EN 1383 |
Timber Structures - Test Methods - Pull-Through Resistance of Timber Fasteners-BS EN 1380, BS EN 1381, BS EN 1382 and BS EN 1383 Together Form a Group of Standards that Supersede the Tests for Category A Fasteners Given in BS 6948: 1989; |
|
BSI BS EN 13892-8 |
Methods of test for screed materials Part 8: Determination of bond strength |
|
BSI BS EN 14188-1 |
Joint fillers and sealants Part 1: Specifications for hot applied sealants-Supersedes BS 2499-1:1993 |
|
BSI BS EN 1565-1 |
Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) Within the Building Structure - Styrene Copolymer Blends (SAN+PVC) - Part 1: Specifications for Pipes, Fittings and the System-CORR 13816: November 8, 2002; Partially Supersedes BS 5255:1989; |
|
BSI BS EN 1859 |
Chimneys - Metal Chimneys - Test Methods-Supersedes BS 4543-1: 1990; AMD 16448: August 31, 2006 |
|
BSI BS EN 494 |
Fibre-cement profiled sheets and fittings Product specification and test methods-AMD 16051: February 14, 2006; AMD 16726: October 31, 2006 |
|
BSI BS EN 60297-3-102 |
Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-102: Injector/extractor handle-Supersedes BS EN 60297-4: 1995 and BS EN 60297-5-101: 2001 |
|
BSI BS EN 680 |
Determination of the drying shrinkage of autoclaved aerated concrete |
|
BSI BS EN 772-15 |
Methods of Test for Masonry Units - Part 15: Determination of Water Vapour Permeability of Autoclaved Aerated Concrete Masonry Units |
|
BSI BS EN 951 |
Door Leaves - Method for Measurement of Height, Width, Thickness and Squareness |
|
BSI BS EN 992 |
Determination of the Dry Density of Lightweight Aggregate Concrete with Open Structure (R) |
|
BSI BS ISO 6746-1 |
Earth-moving Definitions of dimensions and codes Part 1: Base machine-Supersedes BS 6914-2: 1988; Also known as BS 6914-2: 2003 |
|
BSI BS ISO TR 11925-1 |
Reaction to Fire Tests - Ignitability of Building Products Subjected to Direct Impingement of Flame - Part 1: Guidance on Ignitability |
|
BSI DD ENV 1090-4 |
Execution of Steel Structures - Part 4: Supplementary Rules for Hollow Section Structures-CORR 13124: April 2001; |
|
BSI DD ISO/TS 14798 |
Lifts (elevators), escalators and moving walks Risk assessment and reduction methodology |
|
BSI BS 4008 |
Specification for Cattle Grids |
|
BSI BS 4154 PART 2 |
Corrugated Plastics Translucent Sheets Made from Thermo-Setting Polyester Resin (Glass Fibre Reinforced) Part 2: Profiles and Dimensions |
|
BSI BS 5502 PART 66 |
Buildings and Structures for Agriculture Part 66: Code of Practice for Design and Construction of Chitting Houses |
|
BSI BS 5502 PART 81 |
Design of Buildings and Structures for Agriculture Part 81: Code of Practice for Design and Construction of Chemical Stores (R) |
|
BSI BS 5803 PART 3 |
Thermal Insulation for Pitched Roof Spaces in Dwellings Part 3: Cellulose Fibre Thermal Insulation for Application by Blowing-AMD 5829: June 30, 1989 |
|
BSI BS 5931 |
Machine Laid In-Situ Edge Details for Paved Areas |
|
BSI BS 6088 |
Solid Glass Beads for Use with Road Marking Compounds and for Other Industrial Uses-AMD 5600; September 30, 1987; Partially Superseded by BS EN 1423: 1998 |
|
BSI BS 6340 PART 7 |
Shower Units Part 7: Prefabricated Shower Trays Made from Vitreous Enamelled Sheet Steel-Amd 1; |
|
BSI BS 6422 |
Volumetric Rating of Loader and Front Loading Excavator Buckets Used for Earth-Moving |
|
BSI BS 6571 PART 6 |
Vehicle Parking Control Equipment Part 6: Specification for Pay-On-Foot Parking Control Equipment (R) |
|
BSI BS 6911 PART 6 |
Testing Earth-Moving Machinery Part 6: Method for the Evaluation of Lift Capacity of Pipelayers and Wheel Tractors or Loaders Equipped with Side Boom (ISO 8813: 1992) |
|
BSI BS 7074 PART 2 |
Application, Selection and Installation of Expansion Vessels and Ancillary Equipment for Sealed Water Systems Part 2: Code of Practice for Low and Medium Temperature Hot Water Heating Systems |
|
BSI BS 7334 PART 7 |
Measuring Instruments for Building Construction Part 7: Methods for Determining Accuracy in Use of Instruments When Used for Setting Out (ISO 8322-7: 1991) |
|
BSI BS 7335 PART 2 |
Installation of Monolithic Refractories Part 2: Code of Practice for Installation by Gunning |
|
BSI BS 7642 |
Performance Standards in Building - Contents and Format of Standards for Evaluation of Performance (ISO 7162: 1992) |
|
BSI BS EN 1091 |
Vacuum Sewerage Systems Outside Buildings |
|
BSI BS EN 1158 |
Building hardware Door coordinator devices Requirements and test methods-AMD 14076: February 20, 2003; CORR 14398: March 13, 2003; CORR 16310: August 2006 |
|
BSI BS EN 12085 |
Thermal Insulating Products for Building Applications - Determination of Linear Dimensions of Test Specimens |
|
BSI BS EN 12188 |
Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of Adhesion Steel-to-Steel for Characterization of Structural Bonding Agents |
|
BSI BS EN 12274-1 |
Slurry Surfacing - Test Methods - Part 1: Sampling for Binder Extraction |
|
BSI BS EN 12274-5 |
Slurry surfacing Test method Part 5: Determination of wearing |
|
BSI BS EN 12279 |
Gas Supply Systems - Gas Pressure Regulating Installations on Service Lines - Functional Requirements-AMD 16178: August 31, 2006 |
|
BSI BS EN 12614 |
Products and systems for the protection and repair of concrete structures Test methods Determination of glass transition temperatures of polymers |
|
BSI BS EN 12697-13 |
Bituminous Mixtures - Test Methods for Hot Mix Asphalt - Part 13: Temperature Measurement-CORR 13172:August 2001; |
|
BSI BS EN 12833 |
Skylight and Conservatory Roller Shutters - Resistance to Snow Load - Test Method |
|
BSI BS EN 13200-4 |
Spectator facilities - Part 4: Seats - Product characteristics |
|
BSI BS EN 13286-3 |
Unbound and hydraulically bound mixtures Part 3: Test methods for laboratory reference density and water content Vibrocompression with controlled parameters |
|
BSI BS EN 13286-41 |
Unbound and hydraulically bound mixtures Part 41: Test method for determination of the compressive strength of hydraulically bound mixtures |
|
BSI BS EN 13286-43 |
Unbound and hydraulically bound mixtures Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures |
|
BSI BS EN 13286-51 |
Unbound and hydraulically bound mixtures Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction |
|
BSI BS EN 13361 |
Geosynthetic barriers Characteristics required for use in the construction of reservoirs and dams-AMD 16746: November 30, 2006 |
|
BSI BS EN 13383-2 |
Armourstone - Part 2: Test Methods |
|
BSI BS EN 13403 |
Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards |
|
BSI BS EN 13407 |
Wall-hung urinals - Functional requirements and test methods |
|
BSI BS EN 13450 |
Aggregates for railway ballast-CORR 15337:August 17, 2004 |
|
BSI BS EN 13529 |
Products and systems for the protection and repair of concrete structures Test methods Determination of resistance to severe chemical attack |
|
BSI BS EN 1356 |
Performance Test for Prefabricated Reinforced Components of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure Under Transverse Load |
|
BSI BS EN 13687-2 |
Products and Systems for the Protection and Repair of Concrete Structures Test Methods Determination of Thermal Compatibility Part 2: Thunder-Shower Cycling (Thermal Shock) |
|
BSI BS EN 14024 |
Metal profiles with thermal barrier Mechanical performance Requirements, proof and tests for assessment-CORR 15432: November 18, 2004 |
|
BSI BS EN 14146 |
Natural stone test methods Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency) |
|
BSI BS EN 14316-1 |
Thermal insulation products for buildings In-situ thermal insulation formed from expanded perlite (EP) products Part 1: Specification for bonded and loose-fill products before installation |
|
BSI BS EN 14351-1 |
Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics |
|
BSI BS EN 14487-1 |
Sprayed concrete Part 1: Definitions, specifications and conformity |
|
BSI BS EN 14487-2 |
Sprayed concrete Part 2: Execution |
|
BSI BS EN 14488-1 |
Testing sprayed concrete Part 1: Sampling fresh and hardened concrete |
|
BSI BS EN 14501 |
Blinds and shutters Thermal and visual comfort Performance characteristics and classification |
|
BSI BS EN 1469 |
Natural stone products Slabs for cladding Requirements |
|
BSI BS EN 14707 |
Thermal insulating products for building equipment and industrial installations Determination of maximum service temperature for preformed pipe insulation |
|
BSI BS EN 14721 |
Test method for metallic fibre concrete Measuring the fibre content in fresh and hardened concrete |
|
BSI BS EN 14758-1 |
Plastics piping systems for non-pressure underground drainage and sewerage Polypropylene with mineral modifiers (PP-MD) Part 1: Specifications for pipes, fittings and the system |
|
BSI BS EN 14830 |
Thermoplastics inspection chamber and manhole bases Test methods for buckling resistance |
|
BSI BS EN 14889-1 |
Fibres for concrete Part 1: Steel fibres Definitions, specifications and conformity |
|
BSI BS EN 14889-2 |
Fibres for concrete Part 2: Polymer fibres Definitions, specifications and conformity |
|
BSI BS EN 15184 |
Products and systems for the protection and repair of concrete structures Test methods Shear adhesion of coated steel to concrete (pull-out test) |
|
BSI BS EN 1844 |
Flexible Sheets for Waterprofing - Determination of Resistance to Ozone - Plastic and Rubber Sheets for Roof Waterprofing |
|
BSI BS EN 331 |
Manually Operated Ball Valves and Closed Bottom Taper Plug Valves for Gas Installations in Buildings |
|
BSI BS EN 357 |
Glass in building Fire resistant glazed elements with transparent or translucent glass products Classification of fire resistance |
|
BSI BS EN 50341-2 |
Overhead electrical lines exceeding AC 45 kV - Part 2: Index of National Normative Aspects-CORR 16810: 01/31/2007 |
|
BSI BS EN 50379-1 |
Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances Part 1: General requirements and test methods |
|
BSI BS EN 524-5 |
Steel Strip Sheaths for Prestressing Tendons - Test Methods Part 5: Determination of Tensile Load Resistance |
|
BSI BS EN 679 |
Determination of the compressive strength of autoclaved aerated concrete |
|
BSI BS EN 772-13 |
Methods of Test for Masonry Units - Part 13: Determination of Net and Gross Dry Density of Masonry Units (Except for Natural Stone) |
|
BSI BS EN 772-19 |
Methods of Test for Masonry Units - Part 19: Determination of Moisture Expansion of Large Horizontally Perforated Clay Masonry Units |
|
BSI BS EN 817 |
Sanitary Tapware - Mechanical Mixers (PN 10) - General Technical Specifications |
|
BSI BS EN 846-9 |
Methods of Test for Ancillary Components for Masonry - Part 9: Determination of Flexural Resistance and Shear Resistance of Lintels |
|
BSI BS EN 989 |
Determination of the Bond Behaviour Between Reinforcing Bars and Autoclaved Aerated Concrete by the |
|
BSI BS EN ISO 12571 |
Hygrothermal Performance of Building Materials and Products - Determination of Hygroscopic Sorption Properties |
|
BSI BS EN ISO 15875-1 |
Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General |
|
BSI BS EN ISO 3822-2 |
Acoustics - Laboratory Tests on Noise Emission from Appliances and Equipment Used in Water Supply Installations Part 2: Mounting and Operating Conditions for Draw-off Taps and Mixing Valves (R) |
|
BSI BS EN ISO 3822-3 |
Acoustics - Laboratory Tests on Noise Emission from Appliances and Equipment Used in Water Supply Installations Part 3: Mounting and Operating Conditions for in-Line Valves and Appliances-Supersedes BS 6864:Part 3 : 1987; |
|
BSI BS EN ISO 3822-4 |
Acoustics - Laboratory Tests on Noise Emission from Appliances and Equipment Used in Water Supply Installations Part 4: Mounting and Operating Conditions for Special Appliances-Supersedes BS 6864: Part 4 : 1987; |
|
BSI BS EN ISO 8497 |
Thermal Insulation - Determination of Steady-State Thermal Transmission Properties of Thermal Insulation for Circular Pipes |
|
BSI BS ISO 15928-2 |
Houses Description of performance Part 2: Structural serviceability |
|
BSI BS ISO 6746-2 |
Earth-moving Definitions of dimensions and codes Part 2: Equipment and attachments-Also known as BS 6914-3: 2003; Supersedes BS 6914-3: 1988 |
|
BSI DD ENV 12977-3 |
Thermal Solar Systems and Components - Custom Built Systems - Part 3: Performance Characterisation of Stores for Solar Heating Systems |
|
BSI PD 6523 |
Information on Access to and Movement Within and Around Buildings and on Certain Facilities for Disabled People |
|
BSI PD 6529 |
Report on a New Approach for Design Loads for Buildings |
|
BSI PD CEN/TR 14862 |
Precast concrete products Full-scale testing requirements in standards on precast concrete products |
|
BSI PD CEN/TR 1749 |
European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) |
|
BSI PD CR 14378 |
Ventilation for buildings Experimental determination of mechanical energy loss coefficients of air handling components-CORR 14069: January 15, 2003; CR 14378: 2002; |
|
BSI BS 2484 |
Straight Concrete Clayware Cable Covers |
|
BSI BS 3247 |
Salt for Spreading on Highways for Winter Maintenance |
|
BSI BS 3408 |
Specification for Tarpaulins-AMD 8301 October 1994 |
|
BSI BS 3809 |
Wood Wool Permanent Formwork and Infill Units for Reinforced Concrete Floors and Roofs |
|
BSI BS 4624 |
Methods of test for Asbestos-cement building products-AMD 7307: October 1992; |
|
BSI BS 5502 PART 72 |
Buildings and Structures for Agriculture Part 72: Code of Practice for Design and Construction of Controlled Environment Stores for Vegetables, Fruit and Flowers |
|
BSI BS 5502 PART 74 |
Buildings and Structures for Agriculture Part 74: Code of Practice for Design and Construction of Bins and Silos for Combinable Crops |
|
BSI BS 5615 |
Insulating Jackets for Domestic Hot Water Storage Cylinders |
|
BSI BS 5834 PART 4 |
Surface Boxes and Guards for Underground Stopvalves for Gas and Waterworks Purposes Part 4: Preformed Chambers |
|
BSI BS 6280 |
Vacuum (Backsiphonage) Test for Water-Using Appliances |
|
BSI BS 6571 PART 7 |
Vehicle Parking Control Equipment Part 7: Specification for Parking Discs-Supersedes BS 4631: 1970; |
|
BSI BS 6912 SEC 22.5 |
Safety of Earth-Moving Machinery Part 22: Operator Enclosure Environment Section 22.5: Windscreen Defrosting System Test Method (ISO 10263-5:1994) (R) |
|
BSI BS 7225 SEC 2.1 |
Classification of Refractories Part 2: Unshaped Refractory Products Section 2.1: Alumina, Silica and Alumino- Silicate Products |
|
BSI BS 7478 |
Selection and Use of Thermostatic Radiator Valves |
|
BSI BS 7770 |
Guide to the Preparation of Climatic Data and Its Application to Building and Civil Engineering (R) |
|
BSI BS 7987 |
Road Traffic Signal Systems |
|
BSI BS EN 1013-1 |
Light Transmitting Profiled Plastic Sheeting for Single Skin Roofing - Part 1: General Requirements and Test Methods |
|
BSI BS EN 1087-1 |
Particleboards - Determination of Moisture Resistance Part 1: Boil Test (R) |
|
BSI BS EN 12088 |
Thermal Insulating Products for Building Applications - Determination of Long Term Water Absorption by Diffusion |
|
BSI BS EN 12152 |
Curtin Walling - Air Permeability - Performance Requirements and Classification |
|
BSI BS EN 12154 |
Curtain Walling - Watertightness - Performance Requirements and Classification |
|
BSI BS EN 12155 |
Curtain Walling - Watertightness - Laboratory Test Under Static Pressure |
|
BSI BS EN 12200-1 |
Plastics Rainwater Piping Systems for Above Ground External Use - Unplasticized Poly(Vinyl Chloride) (PVC-U) - Part 1: Specifications for Pipes, Fittings and the System |
|
BSI BS EN 12210 |
Windows and doors Resistance to wind load Classification-CORR 14690: September 22, 2003; |
|
BSI BS EN 12274-4 |
Slurry surfacing Test methods Part 4: Determination of cohesion of the mix |
|
BSI BS EN 12274-7 |
Slurry surfacing Test methods Part 7: Shaking abrasion test |
|
BSI BS EN 12310-1 |
Flexible Sheets for Waterproofing - Determination of Resistance to Tearing (Nail Shank) - Part 1: Bitumen Sheets for Roof Waterproofing |
|
BSI BS EN 12326-2 |
Slate and stone products for discontinuous roofing and cladding Part 2: Methods of test-AMD 15166:July 26, 2004 |
|
BSI BS EN 12336 |
Tunnelling machines Shield machines, thrust boring machines, auger boring machines, lining erection equipment Safety requirements |
|
BSI BS EN 12617-2 |
Products and systems for the protection and repair of concrete structures Test methods Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage |
|
BSI BS EN 12635 |
Industrial, commercial and garage doors and gates Installation and use |
|
BSI BS EN 12697-17 |
Bituminous mixtures Test methods for hot mix asphalt Part 17: Particle loss of porous asphalt specimen |
|
BSI BS EN 12697-30 |
Bituminous mixtures Test methods for hot mix asphalt Part 30: Specimen preparation by impact compactor |
|
BSI BS EN 12697-37 |
Bituminous mixtures Test methods for hot mix asphalt Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA |
|
BSI BS EN 12898 |
Glass in Building - Determination of the Emissivity |
|
BSI BS EN 13084-5 |
Free-standing chimneys Part 5: Material for brick liners Product specifications-CORR 16483:June 30, 2006 |
|
BSI BS EN 13108-3 |
Bituminous mixtures Material specifications Part 3: Soft Asphalt |
|
BSI BS EN 13108-7 |
Bituminous mixtures Material specifications Part 7: Porous Asphalt |
|
BSI BS EN 13141-4 |
Ventilation for buildings Performance testing of components/products for residential ventilation Part 4: Fans used in residential ventilation systems |
|
BSI BS EN 13169 |
Thermal Insulation Products for Buildings - Factory Made Products of Expanded Perlite (EPB) - Specification-AMD 15214: June 30, 2004 |
|
BSI BS EN 13179-2 |
Tests for Filler Aggregate Used in Bituminous Mixtures - Part 2: Bitumen Number |
|
BSI BS EN 13182 |
Ventilation for buildings Instrumentation requirements for air velocity measurements in ventilated spaces |
|
BSI BS EN 13200-1 |
Spectator facilities Part 1: Layout criteria for spectator viewing area Specification |
|
BSI BS EN 13596 |
Flexible sheets for waterproofing Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles Determination of bond strength |
|
BSI BS EN 14019 |
Curtain walling Impact resistance Performance requirements |
|
BSI BS EN 14066 |
Natural stone test methods Determination of resistance to ageing by thermal shock |
|
BSI BS EN 14227-14 |
Hydraulically bound mixtures Specifications Part 14: Soil treated by fly ash |
|
BSI BS EN 1457 |
Chimneys Clay/ceramic flue liners Requirements and test methods-AMD 14077: February 13, 2003; CORR 16474:June 30, 2006; Supersedes BS 1181: 1989; |
|
BSI BS EN 15361 |
Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete |
|
BSI BS EN 1567 |
Building Valves - Water Pressure Reducing Valves and Combination Water Reducing Valves - Requirements and Tests |
|
BSI BS EN 1606 |
Thermal Insulating Products for Building Applications - Determination of Compressive Creep-AMD 16805: December 29, 2006; AMD 9745; November 15, 1997; |
|
BSI BS EN 1857 |
Chimneys Components Concrete flue liners |
|
BSI BS EN 1912 |
Structural timber Strength classes Assignment of visual grades and species |
|
BSI BS EN 251 |
Shower Trays - Connecting Dimensions |
|
BSI BS EN 37 |
Pedestal W.C. Pans with Independent Water Supply - Connecting Dimensions-Together with BS EN 33: 1999 Supersedes BS 5503-1: 1977; |
|
BSI BS EN 508-2 |
Roofing Products from Metal Sheet - Specification for Self-Supporting Products of Steel, Aluminium or Stainless Steel Sheet - Part 2: Aluminium |
|
BSI BS EN 516 |
Prefabricated accessories for roofing Installations for roof access Walkways, treads and steps |
|
BSI BS EN 524-2 |
Steel Strip Sheaths for Prestressing Tendons - Test Methods Part 2: Determination of Flexural Behaviour |
|
BSI BS EN 60297-3-103 |
Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-103: Keying and alignment pin-Supersedes BS EN 60297-5-104: 2001 and BS EN 60297-5-105: 2001 |
|
BSI BS EN 62053-31 |
Electricity Metering Equipment (a.c.) - Partricular Requirements - Part 31: Pulse Output Devices for Electromechanical and Electronic Meters (Two Wires Only)-IEC 62053-31: 1998; |
|
BSI BS EN 772-18 |
Methods of Test for Masonry Units - Part 18: Determination of Freeze-Thaw Resistance of Calcium Silicate Masonry Units |
|
BSI BS EN 772-3 |
Methods of Test for Masonry Units - Part 3: Determination of Net Voids of Clay Masonry Units by Hydrostatic Weighing-Partially Supersedes BS 3921: 1985; |
|
BSI BS EN 772-7 |
Methods of Test for Masonry Units - Part 7: Determination of Water Absorption of Clay Masonry Damp Proof Course Units by Boiling in Water-Partially Supersedes BS 3921: 1985; |
|
BSI BS EN ISO 10077-2 |
Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 2: Numerical method for frames |
|
BSI BS EN ISO 15877-1 |
Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 1: General |
|
BSI BS EN ISO 15877-2 |
Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 2: Pipes |
|
BSI CP 151 PART 1 |
Doors and Windows Including Frames and Linings Part 1: Wooden Doors-Amd 1; |
|
BSI DD CEN/TS 81-29 |
Safety rules for the construction and installation of lifts Lifts for the transport of persons and goods Part 29: Interpretations related to EN 81-20 up to EN 81-28 (includes EN 81-1:1998 and EN 81-2:1998) |
|
BSI DD ENV 13419-1 |
Building Products - Determination of the Emission of Volatile Organic Compounds - Part 1: Emission Test Chamber Method |
|
BSI PAS 47 |
Electric security fences Design, installation and maintenance Specification |
|
BSI PD 6472 |
Guide to Specifying the Quality of Building Mortars |
|
BSI PD 6662 |
Scheme for the application of European Standards for intruder and hold-up alarm systems-AMD 16155: January 31, 2006 |
|
BSI PD CEN/TR 15128 |
Survey of European Standards for rehabilitation of drain and sewer systems |
|
BSI PD IEC TR 62059-11 |
Electricity metering equipment Dependability Part 11: General concepts |
|
BSI PD ISO/TR 16764 |
Lifts, escalators and passenger conveyors Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibility |
|
BSI BS 2096 |
Method of Testing Oil-Fired Rotary Dryers for Use in Asphalt and Coated Macadam Plant |
|
BSI BS 4046 |
Compressed Straw Building Slabs |
|
BSI BS 4841-1 |
Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications - Part 1: Specification for laminated insulation boards with autoadhesively or separately bonded facings |
|
BSI BS 5442 PART 1 |
Classification of Adhesives for Construction Part 1: Classification of Adhesives for Use with Flooring Materials-Confirmed on 15 August 1997 |
|
BSI BS 5502 PART 65 |
Buildings and Structures for Agriculture Part 65: Code of Practice for Design and Construction of Crop Processing Buildings |
|
BSI BS 5502-11 |
Buildings and Structures for Agriculture Part 11: Guide to Regulations and Sources of Information |
|
BSI BS 5502-23 |
Buildings and structures for agriculture Part 23: Fire precautions Code of practice |