|
BSI BS EN ISO 105-Z07 |
Textiles - Tests for Colour Fastness Part Z07: Determination of Application Solubility and Solution Stability of Water-Soluble Dyes-ISO 105-Z07: 1995; |
|
BSI BS EN ISO 17229 |
Leather Physical and mechanical tests Determination of water vapour absorption-CORR 14707: September 15, 2003; |
|
BSI BS EN ISO 9902-3 |
Textile Machinery - Determination of Noise Emission - Part 3: Nonwoven Machines-Together with BS EN ISO 9902-1, -2 and -4 to -7, Supersedes BS ISO 9902:1993; |
|
BSI BS ISO 10381-3 |
Soil Quality - Sampling - Part 3: Guidance on Safety |
|
BSI BS ISO 105-F04 |
Textiles - Tests for Colour Fastness - Part F04: Specification for Polyester Adjacent Fabric |
|
BSI BS ISO 5751-3 |
Motorcycle tyres and rims (metric series) Part 3: Range of approved rim contours-Supersedes BS AU 50-4.6.2b:1999 |
|
BSI BS ISO 8640-2 |
Textile machinery and accessories Flat warp knitting machines Part 2: Vocabulary of warp let-off, fabric take-up and batching |
|
BSI DD ENV 14443 |
Domestic furniture Seating Test methods for the determination of durability of upholstery |
|
BSI PAS 23-1 |
General performance requirements for door assemblies - Part 1: Single leaf, external door assemblies to dwellings-AMD 10971: April 2000; AMD 13944: July 10, 2003; CORR 14716: September 25, 2003; AMD 15600: May; 12, 2005; AMD 16980: February 28, 2007 |
|
BSI PD IEC TR 61010-3-042 |
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-042: Conformity Verification Report for IEC 61010-2-042:1997, Particular Requirements for Autoclaves and Sterilizers Using Toxic Gas for the Treatment of Medical Materials, and for Laboratory Processes |
|
BSI BS 2861 |
Presentation of a Weave Diagram and Plans for Drafting, Denting and Lifting |
|
BSI BS 5708 |
Pruner Shears (Secateurs) |
|
BSI BS 5815 PART 2 |
Sheets, Sheeting, Pillowslips, Towels, Napkins, Counterpanes and Continental Quilt Secondary Covers Suitable for Use in the Public Sector Part 2: Towels and Napkins (AMD 8677) September 15, 1995 (L)-Amd 1; |
|
BSI BS 6307 |
Determination of the Effects of a Small Source of Ignition on Textile Floor Coverings (Methenamine Tablet Test) |
|
BSI BS 7755 SUBSEC 4.4.2 |
Soil Quality Part 4: Biological Methods Section 4.4 Effects of Pollutants on Microbes Subsection 4.4.2 Determination of Soil Microbial Mass - Fumigation-Extraction Method-ISO 14240-2: 1997; |
|
BSI BS EN 1102 |
Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the flame spread of vertically oriented specimens |
|
BSI BS EN 12571 |
Materials and Articles in Contact with Foodstuffs - Transport Units for Catering Containers Containing Prepared Foodstuffs - Thermal and Hygienic Requirements and Testing |
|
BSI BS EN 13210 |
Child use and care articles Children's harnesses, reins and similar type articles Safety requirements and test methods |
|
BSI BS EN 132400 |
Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Fixed Capacitors for Electromagnetic Interference Suppresion and Connection to the Supply Mains (Assessment Level D)-AMD 13455: February 8, 2002; Supersedes BS 6201 Part 3: 1982 |
|
BSI BS EN 13252 |
Geotextiles and geotextile-related products Characteristics required for use in drainage systems-AMD 15873: January 16, 2006 |
|
BSI BS EN 13453-1 |
Furniture Bunk beds and high beds for non-domestic use Part 1: Safety, strength and durability requirements |
|
BSI BS EN 13538-1 |
Determination of Dimensional Characteristics of Sleeping Bags Part 1: Internal Dimensions |
|
BSI BS EN 13770 |
Textiles Determination of the Abrasion Resistance of Knitted Footwear Garments |
|
BSI BS EN 14327 |
Leather Physical and mechanical tests Determination of abrasion resistance of automotive leather |
|
BSI BS EN 14697 |
Textiles Terry towels and terry towel fabrics Specification and methods of test |
|
BSI BS EN 1929-1 |
Basket Trolleys - Part 1: Requirements and Tests for Basket Trolleys with or without a Child Carrying Facility-AMD 10935, September 2000; Supersedes BS 7646: 1993; |
|
BSI BS EN 20105-N01 |
Textiles - Tests for Colour Fastness Part N01: Colour Fastness to Bleaching: Hypochlorite (ISO 105-N01: 1993) (L) |
|
BSI BS EN 428 |
Resilient Floor Coverings - Determination of Overall Thickness |
|
BSI BS EN 50136-1-1 |
Alarm Systems - Alarm Transmission Systems and Equipment - Part 1-1: General Requirements for Alarm Transmission Systems-AMD 13441:March 8,2002; |
|
BSI BS EN 565 |
Mountaineering equipment - Tape - Safety requirements and test methods |
|
BSI BS EN 60730-2-12 |
Automatic electrical controls for household and similar use - Part 2-12: Particular requirements for electrically operated door locks |
|
BSI BS EN ISO 105-E08 |
Textiles Tests for Colour Fastness Part E08: Colour Fastness to Hot Water |
|
BSI BS EN ISO 105-G02 |
Textiles - Tests for Colour Fastness Part G02: Colour Fastness to Burnt-Gas Fumes-Supersedes the Relevant Method in BS 1006: 1990 Which is Withdrawn by Amendment; |
|
BSI BS EN ISO 105-G03 |
Textiles - Tests for Colour Fastness Part G03: Colour Fastness to Ozone in the Atmosphere-Supersedes the Relevant Method in BS 1006: 1990 Which is Withdrawn by Amendment; |
|
BSI BS EN ISO 105-J01 |
Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface Colour-Supersedes Method J01 of BS 1006: 1990; |
|
BSI BS EN ISO 105-X01 |
Textiles - Tests for Colour Fastness Part X01: Colour Fastness to Carbonizing: Aluminium Chloride (L) |
|
BSI BS EN ISO 105-X02 |
Textiles - Tests for Colour Fastness Part X02: Colour Fastness to Carbonizing: Sulfuric Acid (L) |
|
BSI BS EN ISO 105-Z04 |
Textiles - Tests for Colour Fastness - Part Z04: Disperse Dyes-ISO 105-Z04: 1995; |
|
BSI BS EN ISO 14931 |
Leather Guide to the selection of leather for apparel (excluding furs) |
|
BSI BS EN ISO 19952 |
Footwear Vocabulary |
|
BSI BS EN ISO 20127 |
Dentistry Powered toothbrushes General requirements and test methods |
|
BSI BS EN ISO 3377-2 |
Leather Physical and mechanical tests Determination of tear load Part 2: Double edge tear-CORR 14710: September 18, 2003; Partially supersedes BS 3144: 1968; |
|
BSI BS EN ISO 4047 |
Leather - Determination of Sulphated Total Ash and Sulphated Water-Insoluble Ash-Supersedes BS 1309: 1974, Clause 6; |
|
BSI BS EN ISO 9902-7 |
Textile Machinery - Determination of Noise Emission - Part 7: Dyeing and Finishing Machines-Together with BS EN ISO 9902-1 to -6, Supersedes BS ISO 9902:1993; |
|
BSI BS ISO 6356 |
Textile Floor Coverings - Assessment of Static Electrical Propensity - Walking Test |
|
BSI BS ISO 8640-1 |
Textile machinery and accessories Flat warp knitting machines Part 1: Vocabulary of basic structure and knitting elements |
|
BSI DD ISO/TS 17450-2 |
Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties |
|
BSI BS 1252 |
Domestic Solid Mineral Fuel-Fired, Free-Standing Cookers with or without Boilers |
|
BSI BS 1892-2.9 |
Gymnasium Equipment Part 2: Particular Requirements Section 2.9: Weight Training Equipment |
|
BSI BS 2087-2 |
Preservative Textile Treatments Part 2: Methods of Test |
|
BSI BS 3356 |
Determination of Bending Length and Flexural Rigidity of Fabrics (AMD 6337) June 28, 1991-Amd 1; |
|
BSI BS 3424-38 |
Testing Coated Fabrics - Part 38: Method 41. Determination of Wounded Burst Strength |
|
BSI BS 3456 SEC 202.19 |
Safety of Household Electrical Appliances Part 202: Particular Requirements Section 202.19: Battery-Powered Shavers, Hair Clippers and Similar Appliances and Their Charging and Battery Assemblies-Read in Conjunction with BS 3456: Part 201 |
|
BSI BS 3584 |
Determination of Solubility of Wool in Urea-Bisulphite Solution |
|
BSI BS 3749 |
E Glass Fibre Woven Roving Fabrics for the Reinforcement of Polyester and Epoxy Resin Systems |
|
BSI BS 4086 |
Recommendations for Maximum Surface Temperatures of Heated Domestic Equipment-Amd 1; |
|
BSI BS 5131 SEC 5.6 |
Methods of Test for Footwear and Footwear Materials Part 5: Testing of Complete Footwear Section 5.6: Impact Test for Rigid Units and Shoe Bottoms |
|
BSI BS 5335 PART 1 |
Continental Quilts Part 1: Specification for Quilts Containing Fillings Other Than Feather and/or Down-AMD 10071; September 15, 1998; |
|
BSI BS 5592 |
Size Designation of Clothes. Headwear |
|
BSI BS 6341 |
Fabrics for Camping Tents (AMD 7645) MAY 15, 1993-Amd 1; |
|
BSI BS 7078 |
Method for Determination of the Electrical Resistance to Earth of an Installed Textile Floor Covering |
|
BSI BS 7271 |
(OBSOLESCENT)1990 Touch and Close Fasteners |
|
BSI BS 7755 SEC 3.4 |
Soil Quality Part 3: Chemical Methods Section 3.4 Determination of the Specific Electrical Conductivity-AMD 9508 July, 19997 |
|
BSI BS 7755 SUBSEC 4.4.3 |
Soil Quality Part 4: Biological Methods Section 4.4 Effects of Pollutants on Microbes Subsection 4.4.3 Determination of Nitrogen Mineralization and Nitrification in Soils and the Influence of Chemicals on These Processes-ISO 14238: 1997; |
|
BSI BS 7755-5.3 |
Soil Quality - Part 5: Physical Methods - Section 5.3: Determination of Particle Density-ISO 11508: 1998; |
|
BSI BS 8459 |
Determination of extractable matter in textiles Method-CORR 15668: May 16, 2005 |
|
BSI BS EN 1078 |
Helmets for pedal cyclists and for users of skateboards and roller skates-AMD 16166: August 31, 2006;:1989 |
|
BSI BS EN 1116 |
Kitchen furniture Co-ordinating sizes for kitchen furniture and kitchen appliances |
|
BSI BS EN 1164 |
Feather and Down - Test Methods - Determination of the Turbidity of an Aqueous Extract |
|
BSI BS EN 1183 |
Materials and Articles in Contact with Foodstuffs - Test Methods for Thermal Shock and Thermal Shock Endurance |
|
BSI BS EN 12222 |
Footwear - Standard Atmospheres for Conditioning and Testing of Footwear and Components for Footwear |
|
BSI BS EN 14073-2 |
Office furniture Storage furniture Part 2: Safety requirements |
|
BSI BS EN 14465 |
Textiles Upholstery fabrics Specification and methods of test-CORR 15130: April 16, 2004; |
|
BSI BS EN 14703 |
Furniture - Links for non-domestic seating linked together in a row - Strength requirements and test methods |
|
BSI BS EN 14766 |
Mountain-bicycles Safety requirements and test methods-:1992 |
|
BSI BS EN 14908-2 |
Open data communication in building automation, controls and building management - Building network protocol - Part 2: Twisted pair communication-Together with BS EN 14908-1: 2005 supersedes DD ENV 13154-2: 1998 |
|
BSI BS EN 1651 |
Paragliding Equipment - Harnesses - Safety Requirements and Strength Tests |
|
BSI BS EN 60350 |
Electric Cooking Ranges, Hobs, Ovens and Grills for Household Use - Methods for Measuring Performance-CORR 10948: March 2001; Supersedes BS 3999-5:1990; IEC 60350:1999; |
|
BSI BS EN 60730-2-13 |
Automatic electrical controls for household and similar use Part 2-13: Particular requirements for humidity sensing controls-CORR 11099: January 2001; AMD 13870: October 30, 2002; AMD 15747: June 30, 2006 |
|
BSI BS EN 60730-2-15 |
Automatic Electrical Controls for Household and Similar Use - Part 2-15: Particular Requirements for Automatic Electrical Water Level Sensing Controls of the Float or Electrode-Sensor Type Used in Boiler Applications-CORR 13269: March 4, 2002; IEC 60730-2-15: 1994; |
|
BSI BS EN ISO 10320 |
Geotextiles and Geotextile-Related Products - Identification on Site-Supersedes BS EN 30320: 1998; |
|
BSI BS EN ISO 105-B05 |
Textiles - Tests for Colour Fastness Part B05: Detection and Assessment of Photochromism (L) |
|
BSI BS EN ISO 105-J02 |
Textiles - Tests for Colour Fastness - Part J02: General Principles for Measurement of Surface Colour-Supersedes Method J02 of BS 1006: 1990; |
|
BSI BS EN ISO 105-J03 |
Textiles - Tests for Colour Fastness Part J03: Calculation of Colour Differences |
|
BSI BS EN ISO 105-Z02 |
Textiles - Tests for Colour Fastness Part Z02: Colour Fastness to Metals in the DyeBath: Iron and Copper (L) |
|
BSI BS EN ISO 11642 |
Leather - Test for Colour Fastness - Colour Fastness to Water-Supersedes Method UK-LD of BS 1006: 1990; |
|
BSI BS EN ISO 15502 |
Household refrigerating appliances Characteristics and test methods-Supersedes BS EN 28187:1992, BS EN ISO 5155:1996, BS EN ISO 7371:1996 and BS EN ISO 8561:1996 |
|
BSI BS EN ISO 2418 |
Leather Chemical, physical and mechanical and fastness tests Sampling location-CORR 14791: October 21, 2003; Partially supersedes BS 3144:1998 and BS 1309:1974; |
|
BSI BS EN ISO 4684 |
Leather Chemical tests Determination of volatile matter |
|
BSI BS EN ISO 9902-6 |
Textile Machinery - Determination of Noise Emission - Part 6: Fabric Manufacturing Machines-Together with BS EN ISO 9902-1 to -5 and -7, Supersedes BS ISO 9902:1993; |
|
BSI BS ISO 10290 |
Textiles - Cotton Yarns - Specifications (L) |
|
BSI BS ISO 22241-1 |
Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements-Supersedes DD ISO/PAS 22241-1:2005 |
|
BSI BS ISO 9073-12 |
Textiles Test methods for nonwovens Part 12: Demand absorbency |
|
BSI DD 8855-1 |
Soil Analysis - Part 1: Determination of Polycyclic Aromatic Hydrocarbons (PAH) |
|
BSI PD 2777 |
Fabric flammability and burning accidents-AMD 14409: June 3, 2003; |
|
BSI BS 2049 |
Paraffin Lighting Appliances for Domestic Use-AMD 7615: February 15, 1993; |
|
BSI BS 2049 |
Specification for Kerosine (paraffin) lighting appliances for domestic use-AMD 2636: June 1978 |
|
BSI BS 2780 |
Leather Terms |
|
BSI BS 3378 |
Roomheaters burning solid mineral fuels-AMD 6139: May 1990; |
|
BSI BS 3424 PART 19 |
Testing Coated Fabrics Part 19: Methods 22A, 22B and 22C Determination of Sulphur Staining (Read in Conjunction with BS 3424: Part 0 Partially Replaces BS 3424: 1973) |
|
BSI BS 3424 PART 22 |
Testing Coated Fabrics Part 22: Method 25. Methods for Determination of Fusion of PVC Coatings and the State of Cure of Vulcanized Rubber Coatings |
|
BSI BS 3424 PART 31 |
Testing Coated Fabrics Part 31: Method 34 Method for Determination of Resistance to Scuffing and Snagging (Read in Conjunction with BS 3424: Part 0) |
|
BSI BS 3424-13 |
Testing Coated Fabrics - Part 13: Guide to the Selection of Methods for Colour Fastness to Light Testing |
|
BSI BS 3456 SEC 202.20 |
Safety of Household and Similar Electrical Appliances Part 202: Particular Requirements Section 202.20: Battery-Powered Tooth- Brushes and Their Charging and Battery Assemblies (To be Read in Conjunction w/ BS 3456: Part 201)-To be Read in Conjunction with BS 3456: Part 201 |
|
BSI BS 3568 |
Method of Determination of Solubility of Wool in Alkali |
|
BSI BS 5131 SEC 6.2 |
Methods of Test for Footwear and Footwear Materials Part 6: Codes of Practice Sec. 6.2: Identification in Footwear Wear Trials of Major Weaknesses in Design or Construction and the Assessment of Fitness-For-Purpose |
|
BSI BS 5258 PART 2 |
Safety of Domestic Gas Appliances Part 2: Cooking Appliances-Amd 2; |
|
BSI BS 5452 |
Hospital Hollow-Ware Made of Plastics Material |
|
BSI BS 5651 |
Cleansing and wetting procedures for use in the assessment of the effect of cleansing and wetting on the flammability of textile fabrics and fabric assemblies-AMD 4012: July 1982 |
|
BSI BS 6185 |
Size Designation of Men's Wear-Amd 1; |
|
BSI BS 6246 PART 5 |
Industrial Laundry Machinery Part 5: Methods for the Assessment of the Effect of Shaped Garment Finishing Machinery on Textiles |
|
BSI BS 7305 |
Method for Determination of the Maximum Safe Ironing Temperature of Fabrics |
|
BSI BS 7370 PART 3 |
Grounds Maintenance Part 3: Recommendations for Maintenance of Amenity and Functional Turf (Other Than Sports Turf) |
|
BSI BS 7755 SEC 3.10 |
Soil Quality Part 3: Chemical Methods Section 3.10: Determination of Carbonate Content - Volumetric Method (ISO 10693: 1995) (L) |
|
BSI BS 7755 SEC 5.2 |
Soil Quality Part 5: Physical Methods Section 5.2: Determination of Water Content in the Unsaturated Zone - Neutron Depth Probe Method (ISO 10573: 1995) (L) |
|
BSI BS EN 1111 |
Sanitary Tapware - Thermostatic Mixing Valves (PN 10) - General Technical Specification |
|
BSI BS EN 12221-1 |
Changing Units for Domestic Use Part 1: Saftey Requirements |
|
BSI BS EN 12225 |
Geotextiles and Geotextile-Related Products - Method for Determining the Microbiological Resistance by a Soil Burial Test-Supersedes DD ENV 12225:1997; |
|
BSI BS EN 12277 |
Mountaineering equipment - Harnesses - Safety requirements and test methods |
|
BSI BS EN 1272 |
Child Care Articles - Table Mounted Chairs - Safety Requirements and Test Methods-Supersedes BS 7495: 1991; |
|
BSI BS EN 12743 |
Footwear - Test Methods For Outsoles - Compression Energy-CORR 13350: January 08, 2002; |
|
BSI BS EN 12745 |
Footwear - Test Methods For Insoles - Pin Holding Strength |
|
BSI BS EN 12772 |
Footwear - Test Methods for Outsoles - Dimensional Stability-Supersedes BS 5131-2.10:1991; |
|
BSI BS EN 12782 |
Footwear - Test Methods for Insoles - Resistance to Stitch Tear-Supersedes BS 5131-4-3: 1990; |
|
BSI BS EN 12801 |
Footwear - Test Methods for Insoles, Lining and Insocks - Perspiration Resistance-AMD 13686: June 21, 2002; |
|
BSI BS EN 12934 |
Feather and Down - Composition Labelling of Processed Feathers and Down for Use as Sole Filling Material-CORR 13130:March 2001; Together with BS EN 1885 and BS EN 13186 (In Preparation) Supersede PD 6522; |
|
BSI BS EN 1307 |
Textile Floor Coverings - Classification of Pile Carpets |
|
BSI BS EN 13248 |
Cookware Coffee makers for domestic use with an independent heat source Definitions, requirements and test methods |
|
BSI BS EN 13277-3 |
Protective Equipment for Martial Arts - Part 3: Additional Requirements and Test Methods for Trunk Protectors |
|
BSI BS EN 13329 |
Laminate Floor Coverings - Specifications, Requirements and Test Methods |
|
BSI BS EN 14533 |
Textiles and textile products Burning behaviour of bedding items Classification scheme |
|
BSI BS EN 1725 |
Domestic Furniture - Beds and Mattresses - Safety Requirements and Test Methods-Supersedes BS 7397: 1991; |
|
BSI BS EN 1870-16 |
Safety of woodworking machines Circular sawing machines Part 16: Double mitre sawing machines for V-cutting |
|
BSI BS EN 1930 |
Child Care Articles - Safety Barriers - Safety Requirements and Test Methods-Supersedes BS 4125;1991; |
|
BSI BS EN 28653 |
Jewellery - Ring-Sizes - Definition, Measurement and Designation (L) |
|
BSI BS EN 29202 |
Jewellery - Fineness of Precious Metal Alloys (ISO 9202: 1991) |
|
BSI BS EN 426 |
Resilient Floor Coverings - Determination of Width, Length, Straightness and Flatness of Sheet Material (L) |
|
BSI BS EN 497 |
Dedicated Liquefied Petroleum Gas Appliances - Multi-Purpose Boiling Burners for Outdoor Use |
|
BSI BS EN 50106 |
Safety of Household and Similar Electrical Appliances - Particular Rules for Routine Tests Referring to Appliances under the Scope of BS EN 60335-1 and BS EN 60967-CORR 13562: November 22, 2001 |
|
BSI BS EN 50338 |
Safety of household and similar electrical appliances Particular requirements for pedestrian-controlled battery powered electrical lawn mowers-CORR 16778: October 31, 2006 |
|
BSI BS EN 60311 |
Electric irons for household or similar use Methods for measuring performance-AMD 16339: May 31, 2006 |
|
BSI BS EN 60317-0-4 |
Specifications for Particular Types of Winding Wires - Part 0-4: General Requirements - Glass-Fibre Wound Resin or Varnish Impregnated, Bare or Enamelled Rectangular Copper Wire-AMD 10909: May 2001; AMD 16168: March 2006; IEC 60317-0-4: 1997 |
|
BSI BS EN 60456 |
Clothes Washing Machines for Household Use - Methods for Measuring the Performance |
|
BSI BS EN 685 |
Resilient, textile and laminate floor coverings Classification |
|
BSI BS EN ISO 105-N05 |
Textiles - Tests for Colour Fastness Part N05: Colour Fastness to Stoving (L) |
|
BSI BS EN ISO 11111-4 |
Textile machinery Safety requirements Part 4: Yarn processing, cordage and rope manufacturing machinery-Together with BS EN ISO 11111-1 Thru BS EN ISO 11111-3 and BS EN ISO 11111-5 thru BS EN ISO 11111-7 supersedes BS EN ISO 11111:1996 |
|
BSI BS EN ISO 17227 |
Leather Physical and mechanical tests Determination of dry heat resistance of leather-CORR 14708: September 15, 2003; |
|
BSI BS EN ISO 17236 |
Leather Physical and mechanical tests Determination of extension set-CORR 14715: September 17, 2003; |
|
BSI BS EN ISO 22777 |
Footwear Test method for accessories: touch and close fasteners Peel strength before and after repeated closing |
|
BSI BS EN ISO 5404 |
Leather Physical and mechanical tests Determination of the water resistance of heavy leathers-CORR 14793: October 22, 2003; |
|
BSI BS ISO 105-F03 |
Textiles - Tests for Colour Fastness - Part F03: Specification for Polyamide Adjacent Fabric |
|
BSI BS ISO 17202 |
Textiles Determination of twist in single spun yarns Untwist/retwist method |
|
BSI BS ISO 22702 |
Utility lighters General consumer-safety requirements |
|
BSI BS ISO 5431 |
Leather - Wet Blue Goat Skins - Specification |
|
BSI PD CEN ISO/TR 20883 |
Footwear - Performance requirements for components for footwear - Shanks |
|
BSI BS 1694 |
Hospital Ward Cots for Children |
|
BSI BS 1913 |
Soft Soap |
|
BSI BS 3300 |
Paraffin Unflued Space Heating and Cooking Appliances for Domestic Use-AMD 6251; July 31, 1989 |
|
BSI BS 3424 PART 10 |
Testing Coated Fabrics Part 10: Methods 12A and 12B. Determination of Surface Drag |
|
BSI BS 3424 PART 16 |
Testing Coated Fabrics Part 16: Method 18: Determination of Air Permeability (Read in Conjunction with BS 3424: Part 0) (L) |
|
BSI BS 3424 PART 17 |
Testing Coated Fabrics Part 17: Methods 20. Method for Determination of Dimensional Stability to Water Immersion |
|
BSI BS 3477 |
Determination of Oils, Fats and Waxes in Cotton-Amd 1; |
|
BSI BS 3838 |
Blazer Cloths-Amd 1; |
|
BSI BS 3999 PART 1 |
Methods of Measuring the Performance of Household Electrical Appliances Part 1: Electric Kettles and Jugs (IEC 530: 1975) |
|
BSI BS 4578 |
Methods of Test for Hardness of, and Air Flow Through, Infants' Pillows-Amd 1; |
|
BSI BS 4655 |
Determination of Pile Loss of Cut-Pile and Non-Loop Pile Upholstery Fabrics |
|
BSI BS 5131 SEC 4.8 |
Methods of Test for Footwear and Footwear Materials Part 4: Other Components Section 4.8: Resistance of Heels of Ladies' Shoes to Lateral Impact |
|
BSI BS 5136 |
Toothpastes-AMD 3781 October 30, 1981 |
|
BSI BS 5779 |
Spray Mixing Taps |
|
BSI BS 5808 |
Underlays for textile floor coverings-AMD 15385:March 9, 2005 |
|
BSI BS 5866 PART 3 |
Blankets Suitable for Use in the Public Sector Part 3: Specification for Synthetic Fibre Cellular Blankets |
|
BSI BS 5873 PART 5 |
Educational Furniture Part 5: Specification for Security of Fixed Secure Storage Furniture for Educational Institutions |
|
BSI BS 6047-1 |
Flame supervision devices for domestic, commercial and catering gas appliances Part 1: Specification for heat sensitive type |
|
BSI BS 6453 |
Performance of Leathers for Garments |
|
BSI BS 6684 |
Safety Harnesses (Including Detachable Walking Reins) for Restraining Children When in Perambulators (Baby Carriages), Pushchairs and High Chairs and When Walking (AMD 6531) June 29, 1990-Amd 1; |
|
BSI BS 6810-1 |
Determination of metals in textiles - Part 1: Analysis by atomic absorption and colorimetric spectroscopy-AMD 8187: May 1994; AMD 15538: May 24, 2005; Renumbers BS 6810: 1987 |
|
BSI BS 7562 PART 3 |
Planning, Design and Installation of Irrigation Schemes Part 3: Guide to Irrigation Water Requirements (L) |
|
BSI BS 7562-5 |
Planning, design and installation of irrigation schemes - Part 5: Guide for irrigation equipment |
|
BSI BS 7755 SEC 5.1 |
Soil Quality Part 5: Physical Methods Section 5.1: Determination of Pore Water Pressure - Tensiometer Method (ISO 11276: 1995) (L) |
|
BSI BS 7755 SUBSEC 4.2.1 |
Soil Quality Part 4: Biological Methods Section 4.2: Effects of Pollutants on Soil Fauna Subsection 4.2.1: Determination of Acute Toxicity to Earthworms (Eisenia Fetida) Using Artificial Soil Substrate (ISO 11268-1: 1993) (L) |
|
BSI BS 7755 SUBSEC 4.4.1 |
Soil Quality Part 4: Biological Methods Section 4.4 Effects of Pollutants on Microbes Subsection 4.4.1 Determination of Soil Microbial Mass - Substrate-Induced Respiration Method-ISO 14240-1: 1997; |
|
BSI BS 7755 SUBSEC 4.4.4 |
Soil Quality Part 4: Biological Methods Section 4.4 Effects of Pollutants on Microbes Subsection 4.4.4 Laboratory Incubation Systems for Measuring the Mineralization of Organic Chemicals in Soil Under Aerobic Conditions-ISO 14239: 1997; |
|
BSI BS 7755-4.2.4 |
Soil Quality - Part 4: Biological Methods - Section 4.2: Effects of Pollutants on Soil Fauna - Subsection 4.2.4: Inhibition of Reproduction of Collembola (Folsomia Candida) by Soil Pollutants-ISO 11267:1999; |
|
BSI BS 7755-5.4 |
Soil Quality - Part 5: Physical Methods - Section 5.4: Determination of Particle Size Distribution in Mineral Soil Material - Method by Sieving and Sedimentation-ISO 11277: 1998; |
|
BSI BS 7755-5.6 |
Soil Quality - Part 5: Physical Methods - Section 5.6: Determination of Dry Bulk Density-ISO 11272: 1998 |
|
BSI BS 8474 |
Furniture - Chairs with electrially operated support surfaces - Requirements-CORR 16556: August 2006 |
|
BSI BS 947 |
Universal System for Designating Linear Density of Textiles (Tex System)-AMD 1376: May 3, 1974 |
|
BSI BS EN 1023-1 |
Office Furniture - Screens Part 1: Dimensions |
|
BSI BS EN 1023-3 |
Office Furniture - Screens - Part 3: Test Methods |
|
BSI BS EN 1163 |
Feather and Down - Test Methods - Determination of the Oil and Fat Content |
|
BSI BS EN 12224 |
Geotextiles and Geotextile-Related Products - Determination of the Resistance to Weathering-Supersedes DD ENV 12224:1997; |
|
BSI BS EN 12227-2 |
Playpens for Domestic Use - Part 2: Test Methods-Supersedes BS 4863:1991; |
|
BSI BS EN 12590 |
Textiles - Industrial Sewing Threads Made Wholly or Partly from Synthetic Fibres-Supersedes BS 6157: 1990; |
|
BSI BS EN 12628 |
Diving Accessories - Combined Bouyancy and Rescue Devices - Functional and Safety Requirements, Test Methods |
|
BSI BS EN 12748 |
Footwear - Test Methods for Outsoles, Insoles, Linings and Insocks - Water Soluble Content-Supersedes Method 5 of BS 1309: 1974; |
|
BSI BS EN 12774 |
Footwear - Test Methods for Outsoles - Determination of Split Tear Strength and Delamination Resistance |
|
BSI BS EN 12790 |
Child care articles Reclined cradles |
|
BSI BS EN 13088 |
Manufactured Articles Filled with Feather and Down - Method for the Determination of a Filled Product's Total Mass and of the Mass of the Filling |
|
BSI BS EN 13780 |
Touch and close fasteners Determination of longitudinal shear strength |
|
BSI BS EN 14036 |
Child use and care articles Baby bouncers Safety requirements and test methods |
|
BSI BS EN 1415 |
Touch-and-Close Fasteners - Behaviour of Slit Selvedges |
|
BSI BS EN 14153-2 |
Recreational diving services Safety related minimum requirements for the training of recreational scuba divers Part 2: Level 2 Autonomous Diver |
|
BSI BS EN 14329 |
Inland navigation vessels Installation of berths and loading areas |
|
BSI BS EN 14344 |
Child use and care articles Child seats for cycles Safety requirements and test methods |
|
BSI BS EN 14413-1 |
Recreational diving services Safety related minimum requirements for the training of scuba instructors Part 1: Level 1 |
|
BSI BS EN 14468-2 |
Table tennis Part 2: Posts for net assemblies Requirements and test methods |
|
BSI BS EN 14764 |
City and trekking bicycles Safety requirements and test methods-CORR 16439: June 30, 2006;:1992 |
|
BSI BS EN 1646-1 |
Leisure Accommodation Vehicles - Motor Caravans - Part 1: Habitation Requirements Relating to Health and Safety |
|
BSI BS EN 50367 |
Railway applications Current collection systems Technical criteria for the interaction between pantograph and overhead line (to achieve free access) |
|
BSI BS EN 60730-2-19 |
Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements-AMD 15742: January 20, 2006 |
|
BSI BS EN 61855 |
Household electrical hair care appliances Methods of measuring the performance |
|
BSI BS EN 959 |
Mountaineering Equipment - Rock Anchors - Safety Requirements and Test Methods |
|
BSI BS EN ISO 10472-1 |
Corr.1 Safety Requirements for Industrial Laundry Machinery Part 1: Common Requirements-CORR 10222; December 15, 1998; ISO 10472-1: 1997; |
|
BSI BS EN ISO 10472-5 |
Corr.1 Safety Requirements for Industrial Laundry Machinery Part 5: Flatwork Ironers, Feeders and Folders-CORR 10226; January 15, 1999; ISO 10472-5: 1997; |
|
BSI BS EN ISO 105-E13 |
Textiles - Tests for Colour Fastness Part E13: Colour Fastness to Acid-Felting: Severe-Supersedes BS 1006: 1990; |
|
BSI BS EN ISO 105-E14 |
Textiles - Test for Colour Fastness Part E14: Colour Fastness to Acid-Felting: Mild-Supersedes BS 1006: 1990; |
|
BSI BS EN ISO 105-S02 |
Textiles - Tests for Colour Fastness Part S02: Colour Fastness to Vulcanization: Sulfur Monochloride (L) |
|
BSI BS EN ISO 105-S03 |
Textiles - Tests for Colour Fastness Part S03: Colour Fastness to Vulcanization: Open Steam (L) |
|
BSI BS EN ISO 11111-1 |
Textile machinery Safety requirements Part 1: Common requirements-Together with BS EN ISO 11111-2 thru BS EN ISO 11111-7 supersedes BS EN ISO 11111:1996 |
|
BSI BS EN ISO 11111-2 |
Textile machinery Safety requirements Part 2: Spinning preparatory and spinning machines-Together with BS EN ISO 11111-1, BS EN ISO 11111-3 Thru BS EN ISO 11111-7 supersedes BS EN ISO 11111:1996 |
|
BSI BS EN ISO 11111-5 |
Textile machinery Safety requirements Part 5: Preparatory machinery to weaving and knitting-Together with BS EN ISO 11111-1 thru BS EN ISO 11111-4, BS EN ISO 11111-6 and BS EN ISO 11111-7 Supersedes BS EN ISO 11111:1996 |
|
BSI BS EN ISO 11111-6 |
Textile machinery Safety requirements Part 6: Fabric manufacturing machinery-Together with BS EN ISO 11111-1 thru BS EN ISO 11111-5 and BS EN ISO 11111-7 supersedes BS EN ISO 11111:1996 |
|
BSI BS EN ISO 1140 |
Fibre ropes Polyamide 3-, 4- and 8-strand ropes-Supersedes BS EN 696:1995 |
|
BSI BS EN ISO 12236 |
Geosynthetics Static puncture test (CBR test) |
|
BSI BS EN ISO 15700 |
Leather - Tests for Colour Fastness - Colour Fastness to Water Spotting |
|
BSI BS EN ISO 17693 |
Footwear Test methods for uppers Resistance to damage on lasting-Supersedes BS EN 13511: 2002 |
|
BSI BS EN ISO 19958 |
Footwear Test methods for heels and top pieces Top piece retention strength |
|
BSI BS EN ISO 22776 |
Footwear Test method for accessories: Touch and close fasteners Shear strength before and after repeated closing |
|
BSI BS EN ISO 2417 |
Leather Physical and mechanical tests Determination of the static absorption of water-CORR 14706: September 18, 2003; Partially supersedes BS 3144: 1968; |
|
BSI BS EN ISO 295 |
Plastics Compression moulding of test specimens of thermosetting materials-CORR 15135: April 8, 2004 |
|
BSI BS EN ISO 5912 |
Camping tents-AMD 15519: June 2006; Renumbers BS ISO 5912: 2003 |
|
BSI BS EN ISO 9902-2 |
Textile Machinery - Noise Test Code - Part 2: Spinning Preparatory and Spinning Machinery-Together with BS EN ISO 9902-1, -3 to -7, Supersedes BS ISO 9902:1993; |
|
BSI BS ISO 10223 |
Textile machinery and accessories Flat warp knitting machines Numbering of guide bars |
|
BSI BS ISO 105-A08 |
Textiles - Tests for Colour Fastness - Part A08: Vocabulary Used in Measurement-CORR 13321:August 2001; |
|
BSI BS ISO 105-F06 |
Textiles - Tests for Colour Fastness - Part F06: Specification for Silk Adjacent Fabric |
|
BSI BS ISO 13990-1 |
Textile machinery and accessories Yarn feeders and yarn control for knitting machines Part 1: Vocabulary |
|
BSI BS ISO 17373 |
Road vehicles Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact |
|
BSI BS ISO 8117 |
Textile machinery - Knitting machines - Nominal diameters of circular machines |
|
BSI PD 6537 PART 1 |
Variability of Methods of Test for Textiles and Reports of Inter-Laboratory Trials on Certain Methods Part 1: Phase 1: BS 2576, BS 4303 and ISO 9290 (L) |
|
BSI PD 6537 PART 2 |
Variability of Methods of Test for Textiles and Reports of Inter-Laboratory Trials on Certain Methods Part 2: Phase 2: BS 3320, BS 2010 and BS 1932 (L) |
|
BSI PD CEN ISO/TR 20882 |
Footwear - Performance requirements for components for footwear - Lining and insocks |
|
BSI BS 1781 |
Linen and Linen Union Textiles |
|
BSI BS 1892-2.11 |
Gymnasium Equipment Part 2: Particular Requirements Section 2.11: Practice and Games Netting and Supporting Trackways |
|
BSI BS 3424 PART 25 |
Testing Coated Fabrics Part 25: Method 28. Method for Determination of the Coating Thickness and Thickness of Any Expanded Layer (Read in Conjunction with BS 3424: Part 0) |
|
BSI BS 3424 PART 5 |
Testing Coated Fabrics Part 5: Methods 7A, 7B and 7C. Methods for Determination of Tear Strength-Replaces Method 7 of BS 3424: 1973; Partially Superseded by BS EN ISO 4674-1: 2003 |
|
BSI BS 3546 |
Coated Fabrics for Use in the Manufacture of Water Penetration Resistant Clothing-Supersedes BS 3546-2:1993, BS 3546-4:1991; and BS 3546-5:1995; |
|
BSI BS 3962 PART 6 |
Methods of Test for Clear Finishes for Wooden Furniture Part 6: Assessment of Resistance to Mechanical Damage (AMD 5937) April 28, 1989-Amd 1; |
|
BSI BS 4359 PART 4 |
Determination of the Specific Surface Area of Powders Part 4: Recommendations for Methods of Determination of Metal Surface Area Using Gas Adsorption Techniques (L) |
|
BSI BS 4814 |
Expansion Vessels Using an Internal Diaphragm, for Sealed Hot Water Heating Systems (AMD 8864) December 15, 1995 (L)-Amd 1; |
|
BSI BS 5455 |
Polyurethane Coated Nylon Fabric for Mattress Covers |
|
BSI BS 5873 PART 4 |
Educational Furniture Part 4: Specification for Strength and Stability of Storage Furniture for Educational Institutions |
|
BSI BS 6408 |
Clothing Made from Coated Fabrics for Protection Against Wet Weather |
|
BSI BS 7755 SEC 3.1 |
Soil Quality Part 3: Chemical Methods Section 3.1: Determination of Dry Matter and Water Content on a Mass Basis by a Gravimetric Method (ISO 11465: 1993) (L) |
|
BSI BS 7755 SEC 3.12 |
Soil Quality Part 3: Chemical Methods Section 3.12: Determination of the Potential Cation Exchange Capacity and Exchangeable Cations Using Barium Chloride Solution Buffered at pH=8.1 (ISO 13536: 1995) (L) |
|
BSI BS 7755 SEC 3.7 |
Soil Quality Part 3: Chemical Methods Section 3.7: Determination of Total Nitrogen - Modified Kjeldahl Method (ISO 11261: 1995) (L) |
|
BSI BS 7755 SEC 3.8 |
Soil Quality Part 3: Chemical Methods Section 3.8: Determination of Organic and Total Carbon After Dry Combusion (Elementary Analysis) (ISO 10694: 1995) (L) |
|
BSI BS 8461 |
Football goals Code of practice for their procurement, installation, maintenance, storage and inspection |
|
BSI BS EN 12130 |
Feather and Down - Test Methods - Determination of the Filling Power (Massic Volume)-CORR 10425: April 15, 1999; Supersedes BS 5334: 1976; |
|
BSI BS EN 12131 |
Feather and Down - Test Methods - Determination of the Quantitive Composition of Feather and Down (Manual Method) |
|
BSI BS EN 12221-2 |
Changing Units for Domestic Use Part 2: Test Methods |
|
BSI BS EN 12332-1 |
Rubber- or Plastics-Coated Fabrics - Determination of Bursting Strength - Part 1: Steel Ball Method-Supersedes Method 8A of BS 3424-6: 1982; |
|
BSI BS EN 12655 |
Gymnastic Equipment - Hanging Rings - Functional and Safety Requirements, Test Methods |
|
BSI BS EN 12746 |
Footwear Test methods for insoles and insocks Water absorption and desorption-AMD 16370: August 2006 |
|
BSI BS EN 12800 |
Footwear - Test Methods for Insoles - Dimensional Stability |
|
BSI BS EN 12803 |
Footwear - Test Methods for Outsoles - Tensile Strength and Elongation-CORR 15131: April 15, 2004 |
|
BSI BS EN 12947 |
Liming Materials - Determination of Magnesium Content - Atomic Absorption Spectrometric Method |
|
BSI BS EN 13243 |
Safety requirements for cableway installations designed to carry persons Electrical equipment other than for drive systems-CORR 15866: May 31, 2006 |
|
BSI BS EN 13277-4 |
Protective Equipment for Martial Arts - Part 4: Additional Requirements and Test Methods for Head Protectors |
|
BSI BS EN 13453-2 |
Furniture Bunk beds and high beds for non-domestic use Part 2: Test methods |
|
BSI BS EN 13517 |
Footwear - Test Methods for Uppers, Lining and Insocks - Colour Migration |
|
BSI BS EN 13537 |
Requirements for Sleeping Bags |
|
BSI BS EN 13845 |
Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification |
|
BSI BS EN 14225-3 |
Diving Suits Part 3: Actively heated or cooled suits (systems) Requirements and test methods |
|
BSI BS EN 15114 |
Textile floor coverings Classification of textile floor coverings without pile |
|
BSI BS EN 15306 |
Surfaces for outdoor sports areas - Exposure of synthetic turf to simulated wear |
|
BSI BS EN 1929-7 |
Basket trolleys Part 7: Requirements and tests for basket trolleys with baby and child carrying facilities |
|
BSI BS EN 203-2-1 |
Gas heated catering equipment Part 2-1: Specific requirements Open burners and wok burners-Together with BS EN 203-2-2, BS EN 203-2-3, BS EN 203-2-4, BS EN 203-2-5, BS EN 203-2-6, BS EN 203-2-7, BS EN 203-2-8, BS EN 203-2-9, BS EN 203-2-10 and BS EN 203-2-11 Supersedes BS EN 203-2:1995 |
|
BSI BS EN 203-2-4 |
Gas heated catering equipment Part 2-4: Specific requirements Fryers-Together with BS EN 203-2-1, BS EN 203-2-2, BS EN 203-2-3, BS EN 203-2-5, BS EN 203-2-6, BS EN 203-2-7, BS EN 203-2-8, BS EN 203-2-9, BS EN 203-2-10 and BS EN 203-2-11 Supersedes BS EN 203-2:1995 |
|
BSI BS EN 30-1-1 |
Domestic cooking appliances burning gas fuel Part 1-1: Safety General-AMD 15961: March 2006; AMD 14746:October 8, 2004; AMD 10610:November 1999 |
|
BSI BS EN 30-1-3 |
Domestic cooking appliances burning gas Part 1-3: Safety Appliances having a glass ceramic hotplate-CORR 16285: March 2006; AMD 16803: December 29, 2006 |
|
BSI BS EN 50130-5 |
Alarm Systems - Part 5: Environmental Test Methods |
|
BSI BS EN 50136-2-1 |
Alarm Systems - Alarm Transmission Systems and Equipment - Part 2-1: General Requirements for Alarm Transmission Equipment-AMD 13439: March 08, 2002; |
|
BSI BS EN 597-2 |
Furniture - Assessment of the Ignitability of Mattresses and Upholstered Bed Bases Part 2: Ignition Source: Match Flame Equivalent (L) |
|
BSI BS EN 60730-2-5 |
Automatic Electrical Controls for Household and Similar Use - Part 2-5: Particular Requirements for Automatic Electrical Burner Control Systems-AMD 15589: August 31, 2006; AMD 15751 December 14, 2005 |
|
BSI BS EN 60974-6 |
Arc welding equipment Part 6: Limited duty manual metal arc welding power sources-CORR 15792: December 12, 2005;:1990 |
|
BSI BS EN 695 |
Kitchen Sinks - Connecting Dimensions |
|
BSI BS EN 892 |
Mountaineering Equipment - Dynamic Mountaineering Ropes - Safety Requirements and Test Methods |
|
BSI BS EN 916 |
Gymnastic equipment - Vaulting boxes - Requirements and test methods including safety |
|
BSI BS EN ISO 105-E11 |
Textiles - Tests for Colour Fastness Part E11: Colour Fastness to Steaming-Supersedes BS 1006: 1990; |
|
BSI BS EN ISO 14460 |
Protective Clothing for Automobile Racing Drivers - Protection Against Heat and Flame - Performance Requirements and Test Methods-AMD 13736: October 7, 2002; |
|
BSI BS EN ISO 15797 |
Textiles Industrial washing and finishing procedures for testing of workwear-CORR 15001:March 4, 2004; AMD 15168:May 26, 2004; Renumbers BS ISO 15797:2002 |
|
BSI BS EN ISO 17233 |
Leather Physical and mechanical tests Determination of cold crack temperature of surface coatings-CORR 14711: September 15, 2003; |
|
BSI BS EN ISO 20863 |
Footwear Test method for stiffeners and toepuffs Bondability |
|
BSI BS EN ISO 3377-1 |
Leather Physical and mechanical tests Determination of tear load Part 1: Single edge tear-CORR 15078: March 17, 2004 |
|
BSI BS EN ISO 4044 |
Leather - Preparation of Chemical Test Samples-Supersedes BS 1309: 1974, Clause 2; |
|
BSI BS EN ISO 5403 |
Leather Physical and mechanical tests Determination of water resistance of flexible leather |
|
BSI BS ISO 10361 |
Textile Floor Coverings - Production of Changes in Appearance by Means of Vettermann Drum and Hexapod Tumbler Testers-Supersedes BS 6659-2:1986; |
|
BSI BS ISO 19932-1 |
Equipment for crop protection Knapsack sprayers Part 1: Requirements and test methods |
|
BSI BS ISO 22241-2 |
Diesel engines NOx reduction agent AUS 32 Part 2: Test methods-Supersedes DD ISO/PAS 22241-2:2005 |
|
BSI BS ISO 5751-1 |
Motorcycle tyres and rims (metric series) Part 1: Design guides-CORR 16538: September 29, 2006; Supersedes BS AU 50-1.6.1C:2002 |