|
BSI BS EN 1822-2 |
High Efficiency Air Filters (HEPA and ULPA) - Part 2: Aerosol Production, Measuring Equipment, Particle Counting Statistics |
|
BSI BS EN 1869 |
Fire Blankets |
|
BSI BS EN ISO 11979-8 |
Ophthalmic implants Intraocular lenses Part 8: Fundamental requirements-:2000 |
|
BSI BS EN 12094-6 |
Fixed firefighting systems Components for gas extinguishing systems Part 6: Requirements and test methods for non-electrical disable devices |
|
BSI BS EN 1868 |
Personal Protective Equipment Against Falls from a Height - List of Equivalent Terms |
|
BSI BS EN 45544-1 |
Workplace Atmospheres - Electrical Apparatus Used for the Direct Detection and Direct Concentration Measurement of Toxic Gases and Vapours - Part 1: General Requirements and Test Methods |
|
BSI BS EN 60255-22-1 |
Electrical relays Part 22-1: Electrical disturbance tests for measuring relays and protection equipment 1 MHz burst immunity tests |
|
BSI BS EN 60335-2-54 |
Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam-AMD 15480:January 7, 2005; AMD 16454: June 30, 2006; AMD 17101: May 31, 2007 |
|
BSI BS EN 61010-2-051 |
Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring-CORR 15004: February 2, 2004; |
|
BSI BS EN 868-6 |
Packaging Materials and Systems for Medical Devices Which are to Be Sterilized - Part 6: Paper for the Manufacture of Packs for Medical Use for Sterilization by Ethylene Oxide or Irradiation - Requirements and Test Methods |
|
BSI BS EN ISO 8536-8 |
Infusion equipment for medical use Part 8: Infusion equipment for use with pressure infusion apparatus |
|
BSI BS ISO 14520-12 |
Gaseous fire-extinguishing systems Physical properties and system design Part 12: IG-01 extinguishant |
|
BSI PD 6519-3 |
Guide to Effects of Current on Human Beings and Livestock - Part 3: Effects of Currents Passing Through the Body of Livestock-IEC 60479-3: 1998; |
|
BSI BS EN 13911 |
Protective clothing for firefighters Requirements and test methods for fire hoods for firefighters |
|
BSI BS EN 352-3 |
Hearing Protectors - General Requirements - Part 3: Ear-Muffs Attached to an Industrial Safety Helmet |
|
BSI BS EN 379 |
Personal eye-protection Automatic welding filters |
|
BSI BS EN 61157 |
Requirements for the Declaration of the Acoustic Output of Medical Diagnostic Ultrasonic Equipment (IEC 1157: 1992) (N) |
|
BSI BS EN 868-9 |
Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 9: Uncoated Nonwoven Materials of Polyolefines for Use in the Manufacture of Heat Sealable Pouches, Reels and Lids - Requirements and Test Methods |
|
BSI BS EN ISO 10524-1 |
Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices-: 1997 |
|
BSI BS EN ISO 7726 |
Ergonomics of the thermal environment Instruments for measuring physical quantities-CORR 13697: February 20, 2002; Supersedes BS EN 27726:1994 |
|
BSI BS 3909 |
Ingot Lead for Radiation Shielding |
|
BSI BS EN 165 |
Personal Eye-Protection - Vocabulary |
|
BSI BS EN 1822-5 |
High Efficiency Particulate Air Filters (HEPA and ULPA) - Part 5: Determining the Efficiency of Filter Element |
|
BSI BS EN 341 |
Personal Protective Equipment Against Falls From a Height - Descender Devices-AMD 9423 March 1997; |
|
BSI BS EN 60601-2-26 |
Medical electrical equipment Part 2-26: Particular requirements for the safety - Specification for electroencephalographs |
|
BSI BS ISO 10294-1 |
Fire Resistance Tests - Fire Dampers for Air Distribution Systems Part 1: Test Method |
|
BSI BS ISO 14520-8 |
Gaseous fire-extinguishing systems Physical properties and system design Part 8: HFC 125 extinguishant |
|
BSI BS 7867 |
Portable Fire Extinguishers for Use in Aircraft-Together with BS EN 3, Part 1 thru Part 6 and BS 7867) it supersedes BS 5423 : 1987 |
|
BSI BS EN 13795-1 |
Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment Part 1: General requirements for manufacturers, processors and products |
|
BSI BS EN 367 |
Protective Clothing - Protection Against Heat and Flames - Test Method: Determination of the Transmission on Exposure to Flame-AMD 7667: May 15, 1993; Supersedes BS 3791: 1970; |
|
BSI BS EN 60335-2-86 |
Household and similar electrical appliances Safety Part 2-86: Particular requirements for electric fishing machines-AMD 15737: May 31, 2006 |
|
BSI BS EN 60601-2-36 |
Medical Electrical Equipment Part 2: Particular Requirements for Safety - Specification for Equipment for Extra-Corporeally Induced Lithotripsy-Also Known as BS 5724-2-36:1997; IEC 60601-2-36: 1997 |
|
BSI BS EN 60601-2-8 |
Medical Electrical Equipment - Part 2: Particular Requirements for Safety Section 2.8 Specification for Therapeutic X-Ray Equipment Operating in the Range 10 kV to 1 MV-CORR 10098: November 1998; Supersedes BS 5724-2.8:1987; Also Known as BS 5724-2.8:1998; IEC 60601-2-8/A1: 1987 |
|
BSI BS EN 61242 |
Electrical accessories - Cable reels for household and similar purposes-CORR 13485: October 31, 2001; AMD 13563: October 1, 2004; AMD 16403: July 31, 2006 |
|
BSI BS EN ISO 20347 |
Gas cylinders - Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles-CORR 17018: April 30, 2007 |
|
BSI BS 3251 |
Indicator plates for fire hydrants and emergency water supplies-AMD 6736: September 1991; |
|
BSI BS EN 1060-1 |
Non-invasive sphygmomanometers - Part 1: General requirements-AMD 13881: October 8, 2002; Supersedes BS 2743: 1990 |
|
BSI BS EN 1717 |
Protection Against Pollution of Potable Water in Water Installations and General Requirements of Devices to Prevent Pollution by Backflow |
|
BSI BS EN 60601-2-11 |
Medical Electrical Equipment Part 2: Particular Requirements for Safety - Section 2.11: Specification for Gamma Beam Therapy Equipment-AMD 15391: October 28,2004; Supersedes BS 5724: Section 2.11: 1989, BS 5724: Section 2.11: Supplement 1: 1989 and BS 5724: Section 2.11: Supplement 2: 1993; Also Known as BS 5724-2.11: 1998; IEC 601-2-11: 1997 |
|
BSI BS EN 60601-2-41 |
Medical Electrical Equipment - Part 2-41: Particular Requirements for the Safety of Surgical Luminaires and Luminaires FOR Diagnosis-IEC 60601-2-41:2000; |
|
BSI BS EN ISO 11979-2 |
Ophthalmic Implants - Intraocular Lenses - Part 2: Optical Properties and Test Methods-CORR 16077: July 31,2006 |
|
BSI BS EN ISO 15197 |
In vitro diagnostic test systems Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus-CORR 14616: August 5, 2003; |
|
BSI PD ISO/TR 14061 |
Information to Assist Forestry Organizations in the Use of Envionmental Management System Standards ISO 14001 and ISO 14004-ISO/TR 14061: 1998; |
|
BSI BS EN 1143-1 |
Secure Storage Units - Requirements, Classification and Methods of Test for Resistance to Burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms |
|
BSI BS EN 12470-5 |
Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device) |
|
BSI BS EN 13725 |
Air quality - Determination of odour concentration by dynamic olfactometry-CORR 16253: April 28, 2006 |
|
BSI BS EN 60601-2-28 |
Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.128: Specification for X-Ray Source Assemblies and X-Ray Tube Assemblies for Medical Diagnosis-Also Known as BS 5724: Section 2.128: 1993; IEC 601-2-28: 1993 |
|
BSI BS EN 60601-2-3 |
Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.3: Specification for Short-Wave Therapy Equipment-AMD 10420: April 1999; AMD 7879: August 15, 1993; Renumbers BS 5724-2.3:1992; IEC 60601-2-3:1991 |
|
BSI BS EN ISO 15798 |
Ophthalmic implants - Ophthalmic viscosurgical devices-CORR 17072: April 30, 2007 |
|
BSI BS ISO 15378 |
Primary packaging materials for medicinal products Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP) |
|
BSI PD CEN/TR 15281 |
Guidance on Inerting for the Prevention of Explosions |
|
BSI BS EN 12564 |
Non-Active Surgical Implants - Joint Replacement Implants - Specific Requirements for Knee Joint Replacement Implants |
|
BSI BS EN 138 |
Respiratory Protective Devices - Fresh Air Hose Breathing Apparatus for Use with Full Face Mask, Half Mask or Mouthpiece Assembly - Requirements, Testing, Marking-Supersedes BS 4667: Part 3: 1974; |
|
BSI BS EN 14181 |
Stationary source emissions Quality assurance of automated measuring systems |
|
BSI BS EN 175 |
Personal Protection - Equipment for Eye and Face Protection During Welding and Allied Processes-AMD 9902: January 15, 1998; Supersedes BS 1542: 1982; |
|
BSI BS EN 470-1 |
Protective Clothing for Use in Welding and Allied Processes Part 1: General Requirements-AMD 10318: February 15, 1999; Supersedes BS 2653: 1955; |
|
BSI BS EN 739 |
Low-pressure hose assemblies for use with medical gases-AMD 13722: October 16, 2002; Together with BS EN 737-1: 1998, it Partially Supersedes BS 5682: 1984; |
|
BSI BS EN 872 |
Water quality Determination of suspended solids Method by filtration through glass fibre filters-Also known as BS 6068-2.54:2005 |
|
BSI BS EN ISO 11979-5 |
Ophthalmic implants Intraocular lenses Part 5: Biocompatibility-:2001 |
|
BSI BS ISO 14025 |
Environmental labels and declarations Type III environmental declarations Principles and procedures |
|
BSI BS 6068-4.12 |
Water Quality - Part 4: Microbiological Methods - Section 4.12: Detection and Enumeration of Legionella-Supersedes DD 211: 1992; ISO 11731: 1998; |
|
BSI BS 7899-2 |
Code of Practice for Assessment of Hazard to Life and Health from Fire - Part 2: Guidance on Methods for the Quantification of Hazards to Life and Health and Estimation of Time to Incapacitation and Death in Fires-Together with Parts 1 and 3, It Supersedes DD 180; |
|
BSI BS EN 12094-5 |
Fixed firefighting systems Components for gas extinguishing systems Part 5: Requirements and test methods for high and low pressure selector valves and their actuators |
|
BSI BS EN 12183 |
Manually Propelled Wheelchairs - Requirements and Test Methods-CORR 10712; September 1999 |
|
BSI BS EN 14387 |
Respiratory protective devices Gas filter(s) and combined filter(s) Requirements, testing, marking-Supersedes BS EN 141:2000, BS EN 371:1992 and BS EN 372:1992 |
|
BSI BS EN 1486 |
Protective Clothing for Fire-Fighters - Test Methods and Requirements for Reflective Clothing for Specialized Fire-Fighting |
|
BSI BS EN 352-7 |
Hearing protectors - Safety requirements and testing - Part 7: Level-dependent ear-plugs |
|
BSI BS EN 868-4 |
Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 4:Paper Bags - Requirements and Test Methods-Supersedes BS 6257: 1989; |
|
BSI BS EN ISO 10535 |
Hoists for the transfer of disabled persons - Requirements and test methods |
|
BSI BS EN ISO 14956 |
Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty-CORR 14186: October 17, 2002; |
|
BSI BS EN ISO 15025 |
Protective clothing Protection against heat and flame Method of test for limited flame spread-Supersedes BS EN 532: 1995; |
|
BSI BS EN ISO 20346 |
Personal protective equipment - Protective footwear-CORR 17019: April 30, 2007 |
|
BSI BS 6658 |
Specification for Protective helmets for vehicle users-AMD 5128: February, 1986; AMD 15925: October, 2005 |
|
BSI BS 7244 |
Flame Arresters for General Use-Partially Superseded by BS EN 12874: 2001 |
|
BSI BS EN 12902 |
Products used for treatment of water intended for human consumption Inorganic supporting and filtering materials Methods of test |
|
BSI BS EN 144-2 |
Respiratory Protective Devices - Gas Cylinder Valves - Part 2: Outlet Connections |
|
BSI BS EN 14470-2 |
Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders |
|
BSI BS EN 1846-2 |
Firefighting and rescue service vehicles Part 2: Common requirements Safety and performance-AMD 15441: February 8, 2005; CORR 15618:March 1, 2005; AMD 16686: October 31, 2006 |
|
BSI BS EN 1865 |
Specifications for Stretchers and Other Patient Handling Equipment Used in Road Ambulances-CORR 15987: September 27, 2005 |
|
BSI BS EN 464 |
Protective Clothing - Protection Against Liquid and Gaseous Chemicals, Including Liquid Aerosols and Solid Particles - Test Method: Determination of Leak-Tightness of Gas-Tight Suits (Internal Pressure Test) (AMD 8619) May 15, 1995 (N)-Amd 1; |
|
BSI BS EN 60601-2-47 |
Medical Electrical Equipment - Part 2-47: Particular Requirements for the Safety, Including Essential Performance, of Ambulatory Electrocardiographic Systems-IEC 60601-2-47:2001; |
|
BSI BS EN ISO 11138-5 |
Sterilization of health care products Biological indicators Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes-:2000 |
|
BSI BS EN ISO 11140-4 |
Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
|
BSI BS EN ISO 12870 |
Ophthalmic optics Spectacle frames Requirements and test methods-Supersedes BS EN ISO 12870:1998 and BS EN ISO 9456:1997 |
|
BSI BS EN ISO 14729 |
Ophthalmic Optics - Contact Lens Care Products - Microbiological Requirements and Test Methods for Products and Regimens for Hygienic Management of Contact Lenses-Also Known as BS 7208-26:2001; Supersedes BS 7208 PART 3:1992 |
|
BSI BS EN ISO 15001 |
Anaesthetic and respiratory equipment Compatibility with oxygen-AMD 15145:June 24, 2004; Renumbers BS ISO 15001:2003 |
|
BSI BS EN ISO 16000-11 |
Indoor air Part 11: Determination of the emission of volatile organic compounds from building products and furnishing Sampling, storage of samples and preparation of test specimens-CORR 16355: August 2006; Supersedes DD ENV 15419-3: 1999 |
|
BSI BS ISO 14520-14 |
Gaseous fire-extinguishing systems Physical properties and system design Part 14: IG-55 extinguishant |
|
BSI BS EN 13824 |
Sterilization of medical devices Aseptic processing of liquid medical devices Requirements |
|
BSI BS EN 374-1 |
Protective gloves against chemicals and micro-organisms Part 1: Terminology and performance requirements |
|
BSI BS EN 50402 |
Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen Requirements on the functional safety of fixed gas detection systems |
|
BSI BS EN 60601-2-9 |
Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.9: Specification for Patient Contact Dosemeters Used in Radiotherapy with Electrically Connected Radiation Detectors-Supersedes BS 5724: Section 2.9:1988; Also Known as BS 5724: Section 2.9: 1997; IEC 601-2-9: 1996 |
|
BSI BS EN 868-8 |
Packaging Materials and Systems for Medical Devices Which are to Be Sterilized - Part 8: Re-Usable Sterilization Containers for Steam Sterilizers Conforming to EN 285 - Requirements and Test Methods |
|
BSI BS EN ISO 11979-9 |
Ophthalmic implants Intraocular lenses Part 9: Multifocal intraocular lenses |
|
BSI BS EN ISO 8536-1 |
Infusion Equipment for Medical Use - Part 1: Infusion Glass Bottles |
|
BSI DD ENV ISO 13530 |
Water Quality - Guide to Analytical Quality Control for Water Analysis |
|
BSI BS EN 12470-4 |
Clinical Thermometers - Part 4: Performance of Electrical Thermometers for Continuous Measurement |
|
BSI BS EN 13640 |
Stability Testing of in Vitro Diagnostic Reagents |
|
BSI BS EN 14384 |
Pillar fire hydrants |
|
BSI BS EN 402 |
Respiratory protective devices - Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking |
|
BSI BS EN 50270 |
Electromagnetic Compatibility - Electrical Apparatus for the Detection and Measurement of Combustible Gases, Toxic Gases or Oxygen |
|
BSI BS EN 60318-1 |
Electroacoustics - Simulators of Human Head and Ear - Part 1: Ear Simulator for the Calibration of Supra-Aural Earphones-Supersedes BS 4669: 1971; IEC 60318-1: 1998; |
|
BSI BS EN 60601-2-32 |
Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.32: Specification for Associated Equipment of X-Ray Equipment-Also Known as BS 5724-2.32:1995; IEC 601-2-32: 1994 |
|
BSI BS EN 60601-2-46 |
Medical Electrical Equipment - Part 2: Particular Requirements for Safety - Specification for Operating Tables-Supersedes BS 5724-2.22: 1987; Also Known as BS 5724-2.46: 1998; IEC 60601-2-46: 1998; |
|
BSI BS EN 60601-2-5 |
Medical Electrical Equipment - Part 2-5: Particular Requirements for the Safety of Ultrasonic Physiotherapy Equipment-Supersedes BS 5724-2-5: 1985; |
|
BSI BS EN 868-3 |
Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 3: Paper for Use in the Manufacture of Paper Bags (Specified in EN 868-4) and in the Manufacture of Pouches and Reels (Specified in EN 868-5) - Requirements and Test Methods |
|
BSI BS EN ISO 11608-1 |
Pen-Injectors for Medical Use - Part 1: Pen-Injectors - Requirements and Test Methods |
|
BSI BS EN ISO 12402-2 |
Personal flotation devices - Part 2: Lifejackets, performance level 275 - Safety requirements-:1994 |
|
BSI BS EN ISO 407 |
Small medical gas cylinders Pin-index yoke-type valve connections-Supersedes BS EN 850:1997 |
|
BSI BS EN ISO 5667-16 |
Water Quality - Sampling - Part 16: Guidance on Biotesting of Samples-AMD 10703; January 2000; Also Known as BS 6068-6.16:1998 |
|
BSI BS EN ISO 7153-1 |
Surgical Instruments - Metallic Materials - Part 1: Stainless Steel-AMD 13007: March 2001; Renumbers BS 5194-1:1991 |
|
BSI BS 4094 PART 1 |
Recommendations for Data on Shielding from Ionizing Radiation Part 1: Shielding from Gamma Radiation |
|
BSI BS 6068-1.9 |
Water Quality Part 1: Glossary Section 1.9: Alphabetical List and Subject Index-ISO 6107-9: 1997; |
|
BSI BS EN 12094-8 |
Fixed Firefighting Systems - Components for Gas Extinguishing Systems - Part 8: Requirements and Test Methods for Flexible Connectors for CO2 Systems |
|
BSI BS EN 12385-7 |
Steel wire ropes Safety Part 7: Locked coil ropes for mine shafts |
|
BSI BS EN 13949 |
Respiratory equipment Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen Requirements, testing, marking |
|
BSI BS EN 14522 |
Determination of the auto ignition temperature of gases and vapours |
|
BSI BS EN 14710-2 |
Fire-fighting pumps Fire-fighting centrifugal pumps without primer Part 2: Verification of general and safety requirements |
|
BSI BS EN 1822-3 |
High Efficiency Air Filters (HEPA and ULPA) - Part 3: Testing Flat Sheet Filter Media |
|
BSI BS EN 374-2 |
Protective gloves against chemicals and micro-organisms Part 2: Determination of resistance to penetration |
|
BSI BS EN 45544-2 |
Workplace Atmospheres - Electrical Apparatus Used for the Direct Detection and Direct Concentration Measurement of Toxic Gases and Vapours - Part 2: Performance Requirements for Apparatus Used for Measuring Concentrations in the Region of Limit Values |
|
BSI BS EN 481 |
Workplace Atmospheres - Size Fraction Definitions for Measurement of Airborne Particles-Also Known as BS 6069-3.5:1993 |
|
BSI BS EN 60601-2-45 |
Medical Electrical Equipment - Part 2-45: Particular Requirements for Safety of Mammographic X-Ray Equipment and Mammographic Stereotactic Devices-Also Known as BS 5724-2-45:2001; IEC 60601-2-45:2001 |
|
BSI BS EN 60695-11-5 |
Fire hazard testing Part 11-5: Test flames Needle-flame test method Apparatus, confirmatory test arrangement and guidance-Supersedes BS EN 60695-2-2:1995 |
|
BSI BS EN ISO 12402-10 |
Personal flotation devices Part 10: Selection and application of personal flotation devices and other relevant devices-:1998 |
|
BSI BS EN ISO 12402-9 |
Personal flotation devices - Part 9: Test methods |
|
BSI BS EN ISO 16000-9 |
Indoor air Part 9: Determination of the emission of volatile organic compounds from building products and furnishing Emission test chamber method |
|
BSI BS EN ISO 5667-13 |
Water Quality - Sampling Part 13: Guidance on Sampling of Sludges from Sewage and Water Treatment Works-CORR 10043: May 1998; CORR 10228 January 15, 1999; Also Known As BS 6068-6.13:1998 |
|
BSI BS EN ISO 75-2 |
Plastics Determination of temperature of deflection under load Part 2: Plastics and ebonite-CORR 16416: August 2006 |
|
BSI BS ISO 14520-2 |
Gaseous fire-extinguishing systems Physical properties and system design Part 2: CF3I extinguishant |
|
BSI BS ISO 14520-7 |
Gaseous Fire-Extinguishing Systems - Physical Properties and System Design - Part 7: HCFC Blend 124 Extinguishant-Together with BS ISO 14520-1, BS ISO 14520-2, BS ISO 14520-3, BS ISO 14520-4, BS ISO 14520-6, BS ISO 14520-8,BS ISO 14520-9, BS ISO 14520-10, BS ISO 14520-11, BS ISO 14520-12, BS ISO 14520-13, BS ISO 14520-14, BS ISO 14520-15, It Supersedes DD 233:1996 Which is Withdrawn; |
|
BSI BS 6068-6.14 |
Water Quality - Part 6: Sampling - Section 6.14 Guidance on Quality Assurance of Environmental Water Sampling and Handling-ISO 5667-14: 1998; |
|
BSI BS 7899 PART 1 |
Code of Practice for Assessment of Hazard to Life and Health from Fire Part 1: General Guidance |
|
BSI BS 7937 |
Specification for Portable Fire Extinguishers for Use on Cooking Oil Fires (Class F) |
|
BSI BS 8468-1 |
Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Part 1: Positive pressure, self-contained, open-circuit breathing apparatus - Specification-CORR 16807: November 30, 2006 |
|
BSI BS EN 12094-13 |
Fixed Firefighting Systems - Components for Gas Extinguishing Systems - Part 13: Requirements and Test Methods for Check Valves and Non-Return Valves-CORR 13873: September 19, 2002; |
|
BSI BS EN 12094-7 |
Fixed Firefighting Systems - Components for Gas Extinguishing Systems - Part 7: Requirements and Test Methods for Nozzles for CO2 Systems-AMD 16385: August 2006 |
|
BSI BS EN 12566-3 |
Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants-AMD 17159: May 31, 2007 |
|
BSI BS EN 13060 |
Small steam sterilizers-Supersedes BS 3970-4:1990 |
|
BSI BS EN 13287 |
Personal protective equipment Footwear Test method for slip resistance-Supersedes DD ENV 13287:2000 |
|
BSI BS EN 14373 |
Explosion suppression systems |
|
BSI BS EN 14466 |
Fire fighting pumps Portable pumps Safety and performance requirements, tests |
|
BSI BS EN 1899-1 |
Water Quality - Determination of Biochemical Oxygen Demand After n Days (BODn) - Part 1: Dilution and Seeding Method with Allylthiourea Addition-Also Known as BS 6068-2.63: 1998; Supersedes BS 6068-2.14: 1990 |
|
BSI BS EN 375 |
Information Supplied by the Manufacturer with in Vitro Diagnostic Reagents for Professional Use |
|
BSI BS EN 60601-2-43 |
Medical Electrical Equipment - Part 2-43: Particular Requirements for the Safety of X-Ray Equipment for Interventional Procedures-IEC 60601-2-43:2000; |
|
BSI BS EN 943-2 |
Protective Clothing Against Liquid and Gaseous Chemicals, Including Liquid Aerosols and Solid Particles - Part 2: Performance Requirements for |
|
BSI BS EN ISO 12402-1 |
Personal flotation devices Part 1: Lifejackets for seagoing ships Safety requirements |
|
BSI BS EN ISO 12402-4 |
Personal flotation devices - Part 4: Lifejackets, performance level 100 - Safety Requirements-:1995 |
|
BSI BS EN ISO 9999 |
Assistive products for persons with disability - Classification and terminology |
|
BSI BS ISO 14520-13 |
Gaseous fire-extinguishing systems Physical properties and system design Part 13: IG-100 extinguishant |
|
BSI BS 6440 |
Powered Lifting Platforms for Use by Disabled Persons - Code of Practice-AMD 10960 May 2000; |
|
BSI BS EN 1028-2 |
Fire-Fighting Pumps Fire-Fighting Centrifugal Pumps with Primer Part 2: Verification of General and Safety Requirements |
|
BSI BS EN 737-1 |
Medical Gas Pipeline Systems - Part 1: Terminal Units for Compressed Medical Gases and Vacuum-Together with BS EN 739: 1998, it Partially Supersedes BS 5682: 1984: |
|
BSI BS EN 813 |
Personal Protective Equipment for Prevention of Falls from a Height - Sit Harnesses |
|
BSI BS EN ISO 12402-5 |
Personal flotation devices - Part 5: Buoyancy aids (level 50) Safety requirements-:1994 |
|
BSI BS EN ISO 13406-2 |
Ergonomic requirements for work with visual displays based on flat panels Part 2: Ergonomic requirements for flat panel displays |
|
BSI BS EN ISO 18778 |
Respiratory equipment Infant monitors Particular requirements |
|
BSI BS ISO 14520-5 |
Gaseous fire-extinguishing systems Physical properties and system design Part 5: FK-5-1-12 extinguishant |
|
BSI BS 3970-2 |
Sterilizing and Disinfecting Equipment for Medical Products Part 2: Specification for Steam Sterilizers for Aqueous Fluids in Sealed Rigid Containers |
|
BSI BS EN 13795-2 |
Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment Part 2: Test methods |
|
BSI BS EN 1866 |
Mobile Fire Extinguishers |
|
BSI BS EN 421 |
Protective Gloves Against Ionizing Radiation and Radioactive Contamination (N) |
|
BSI BS EN 60601-2-39 |
Medical Electrical Equipment - Part 2-39: Particular Requirements for Safety - Specification for Peritoneal Dialysis Equipment-CORR 1 10990: June 2001; Supersedes BS EN 50072: 1992; IEC 60601-2-39: 1999; Also Known as BS 5724-2.39: 1999 |
|
BSI BS EN 694 |
Fire-fighting hoses Semi-rigid hoses for fixed systems |
|
BSI BS EN ISO 11228-3 |
Ergonomics - Manual handling - Part 3: Handling of low loads at high frequency |
|
BSI BS EN ISO 1135-4 |
Transfusion equipment for medical use - Part 4: Transfusion sets for single use-CORR 16991: March 30, 2007 |
|
BSI BS EN ISO 17294-2 |
Water quality Application of inductively coupled plasma mass spectrometry (ICP-MS) Part 2: Determination of 62 elements-AMD 15467:November 29, 2004; Renumbers BS ISO 17294-2:2003; Also known as BS 6068-2.89:2004 |
|
BSI BS EN ISO 5349-2 |
Mechanical Vibration - Measurement and Evaluation of Human Exposure to Hand-Transmitted Vibration - Part 2: Practical Guidance for Measurement at the Workplace |
|
BSI BS ISO 14520-3 |
Gaseous Fire-Extinguishing Systems - Physical Properties and System Design - Part 3: FC-2-1-8 Extinguishant-Together with BS ISO 14520-1, BS ISO 14520-2, BS ISO 14520-4, BS ISO 14520-6, BS ISO 14520-7, BS ISO 14520-8,BS ISO 14520-9, BS ISO 14520-10, BS ISO 14520-11, BS ISO 14520-12, BS ISO 14520-13, BS ISO 14520-14, BS ISO 14520-15, It Supersedes DD 233:1996 Which is Withdrawn; |
|
BSI BS ISO 17493 |
Clothing and Equipment for Protection Against Heat - Test Method for Convective Heat Resistance using a Hot Air Circulating Oven |
|
BSI BS 5330 |
Method of Test for Estimating the Risk of Hearing Handicap Due to Noise Exposure |
|
BSI BS 5724 SEC 2.14 |
Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.14: Specification for Electroconvulsive Therapy Equipment (IEC 601-2-14: 1989) (AMD 6800) December 24, 1991-Amd 1; |
|
BSI BS 8478 |
Respiratory protective devices - Breathing gases for diving and hyperbaric applications |
|
BSI BS EN 12094-2 |
Fixed firefighting systems Components for gas extinguishing systems Part 2: Requirements and test methods for non-electrical automatic control and delay devices |
|
BSI BS EN 12568 |
Foot and Leg Protectors - Requirements and Test Methods for Toecaps and Metal Penetration Resistant Inserts |
|
BSI BS EN 1281-2 |
Anaesthetic and Respiratory Equipment - Conical Connectors Part 2: Screw-Threaded, Weight-Bearing Connectors (N) |
|
BSI BS EN 12841 |
Personal fall protection equipment Rope access systems Rope adjustment devices |
|
BSI BS EN 1364-3 |
Fire resistance tests for non-loadbearing elements Part 3: Curtain walling Full configuration (complete assembly) |
|
BSI BS EN 13726-1 |
Test Methods for Primary Wound Dressings - Part 1: Aspects of Absorbency |
|
BSI BS EN 13975 |
Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects |
|
BSI BS EN 14792 |
Stationary source emissions Determination of mass concentration of nitrogen oxides (NOx) Reference method: Chemiluminescence |
|
BSI BS EN 29241-3 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 3: Visual Display Requirements-AMD 13606: April 8, 2005; Supersedes BS 7179-3:1990; ISO 9241-3:1992 |
|
BSI BS EN 342 |
Protective clothing Ensembles and garments for protection against cold |
|
BSI BS EN 352-5 |
Hearing protectors Safety requirements and testing Part 5: Active noise reduction ear-muffs-AMD 16152: September 29, 2006 |
|
BSI BS EN 60601-2-20 |
Medical Electrical Equipment Part 2: Particular Requirements for Safety - Specification for Transport Incubators-Supersedes BS 5724 Section 2.120: 1991; Also Known as BS 5724-2.120: 1997; IEC 601-2-20: 1990 |
|
BSI BS EN 60601-2-40 |
Medical Electrical Equipment - Part 2-40: Particular Requirements for Safety - Specification for Electromyographs and Evoked Response Equipment-Also Numbered as BS 5724-2.40: 1998; IEC 60601-2-40: 1998; |
|
BSI BS EN ISO 10301 |
Water Quality - Determination of Highly Volatile Halogenated Hydrocarbons - Gas-Chromatographic Methods-Also Known as BS 6068-2.58:1997 |
|
BSI BS EN ISO 11553-1 |
Safety of machinery Laser processing machines Part 1: General safety requirements-Supersedes BS EN 12626:1997 |
|
BSI BS EN ISO 11810-1 |
Lasers and laser-related equipment Test method and classification for the laser resistance of surgical drapes and/or patient protective covers Part 1: Primary ignition and penetration-Supersedes BS EN ISO 11810:2002 |
|
BSI BS EN ISO 11885 |
Water Quality - Determination of 33 Elements by Inductively Coupled Plasma Atomic Emission Spectroscopy-Also Known as BS 6068-2.60:1998 |
|
BSI BS EN ISO 12402-6 |
Personal flotation devices - Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods |
|
BSI BS EN ISO 14534 |
Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Fundamental Requirements-CORR 14036: August 14, 2002; |
|
BSI BS EN ISO 14911 |
Water Quality - Determination of Dissolved Li+, Na+, NH4+, K+, Mn+, Ca2+, Mg2+, Sr2+, and Ba2+ Using Ion Chromatography - Method for Water and Waste Water |
|
BSI BS EN ISO 17510-1 |
Sleep Apnoea Breathing Therapy - Part 1: Sleep Apnoea Breathing Therapy Devices |
|
BSI BS EN ISO 6942 |
Protective clothing Protection against heat and fire Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat-Supersedes BS EN 366:1993; |
|
BSI BS EN ISO 8537 |
Sterile, Single-Use Syringes, with or without Needle, for Insulin-AMD 13035; May 2001; |
|
BSI BS ISO 10294-3 |
Fire Resistance Tests - Fire Dampers for Air Distribution Systems - Part 3: Guidance on the Test Method |
|
BSI BS ISO 14520-11 |
Gaseous fire-extinguishing systems Physical properties and system design Part 11: HFC 236fa extinguishant |
|
BSI BS ISO 5667-17 |
Water Quality - Sampling - Part 17: Guideance on Sampling of Suspended Sediments |
|
BSI BS ISO 5667-6 |
Water quality Sampling Part 6: Guidance on sampling of rivers and streams-ISO 5667-6:2005; Supersedes BS 6068-6.6:1991 |
|
BSI BS ISO 8600-1 |
Optics and Optical Instruments - Medical Endoscopes and Endoscopic Accessories Part 1: General Requirements |
|
BSI BS 3521 PART 2 |
Terms Relating to Ophthalmic Optics and Spectacle Frames Part 2: Glossary of Terms Relating to Spectacle Frames (AMD 9203) August 15, 1996 (N)-Amd 1; Supersedes BS 3521 PARTS 1&2:1962 |
|
BSI BS 4001 PART 2 |
Recommendations for the Care and Maintenance of Underwater Breathing Apparatus Part 2: Standard Diving Equipment-Amd 1; |
|
BSI BS EN 12094-16 |
Fixed firefighting systems Components for gas extinguishing systems Part 16: Requirements and test methods for odorizing devices for CO2 low |
|
BSI BS EN 1621-2 |
Motorcyclists’ protective clothing against mechanical impact Part 2: Motorcyclists’ back protectors Requirements and test methods-CORR 15030: February 24, 2004 |
|
BSI BS EN 1839 |
Determination of explosion limits of gases and vapours |
|
BSI BS EN 25923 |
Fire Protection - Fire Extinguishing Media - Carbon Dioxide (AMD 8041) March 15, 1994 (ISO 5923: 1989) (Formerly BS 6535: Part 1: 1990 Replaces BS 6535: Part 1: 1984) (N)-Amd 1; |
|
BSI BS EN 45544-3 |
Workplace Atmospheres - Electrical Apparatus Used for the Direct Detection and Direct Concentration Measurement of Toxic Gases and Vapours - Part 3: Performance Requirements for Apparatus Used for Measuring Concentrations Well Above Limit Values |
|
BSI BS EN 60601-2-16 |
Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Haemodialysis, Haemodiafiltration and Haemofiltration Equipment-CORR 10991: March 2001; Supersedes BS 5724-2-16: 1989; Also Known as BS 5724-2-16: 1998; IEC 60601-2-16: 1998 |
|
BSI BS EN 60601-2-21 |
Medical Electrical Equipment Part 2: Particular Requirements for Safety - Specification for Infant Radiant Warmers-Also Known as BS 5724: Section 2.121: 1997; IEC 601-2-21: 1995 |
|
BSI BS EN 61223-3-5 |
Evaluation and routine testing in medical imaging departments Part 3-5: Acceptance tests Imaging performance of computed tomography X-ray equipment |
|
BSI BS EN 61472 |
Live working Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV A method of calculation |
|
BSI BS EN ISO 10707 |
Water Quality Evaluation in an Aqueous Medium of the `Ultimate' Aerobic Biodegradability of Organic Compounds - Method by Analysis of Biochemical Oxygen Demand (Closed Bottle Test)-AMD 9903: March 1998; Renumbers BS 6068: Section 5.16:1995 |
|
BSI BS EN ISO 8185 |
Humidifiers for medical use General requirements for humidification systems-CORR 14088: February 19, 2003; Supersedes BS 5724-2-24: 1989; Also Known as BS 5724-2-24: 1998 |
|
BSI BS EN ISO 9886 |
Ergonomics Evaluation of thermal strain by physiological measurements-CORR 15064: March 23, 2004 |
|
BSI DD ISO/PAS 18152 |
Ergonomics of human-system interaction Specification for the process assessment of human-system issues |
|
BSI BS 1679-8 |
Containers for Pharmaceutical Dispensing Part 8: Specification for Glass and Plastics Containers for Solid Dosage Forms, Semi-Solids and Powders |
|
BSI BS 6068 SEC 6.7 |
Water Quality Part 6: Sampling Section 6.7: Guidance on Sampling of Water and Steam in Boiler Plants (ISO 5667-7: 1993) (N) |
|
BSI BS EN 133 |
Respiratory Protective Devices - Classification |
|
BSI BS EN 13795-3 |
Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - Part 3: Performance requirements and performance levels |
|
BSI BS EN 142 |
Respiratory Protective Devices - Mouthpiece Assemblies - Requirements, Testing, Marking-Supersedes BS 7309:1990; |
|
BSI BS EN 14385 |
Stationary source emissions Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V |
|
BSI BS EN 352-4 |
Hearing Protectors - Safety Requirements and Testing - Part 4: Level-Dependent Ear-Muffs-AMD 16102: March 2006 |
|
BSI BS EN 50077 |
Low Profile Connectors (IS-1) for Implantable Pacemakers (N) |
|
BSI BS EN 60601-2-19 |
Medical Electrical Equipment Part 2: Particular Requirements for Safety - Specification for Baby Incubators-Supersedes BS 5724 Section 2.119:1991; Also Known as BS 5724-2.119:1997; IEC 601-2-19: 1990 |
|
BSI BS EN ISO 11980 |
Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Guidance for Clinical Investigations-Also Known as BS 7208-16: 1998; Supersedes BS 7208 PART 3:1992 |
|
BSI BS EN ISO 16000-1 |
Indoor air Part 1: General aspects of sampling strategy-AMD 16406: August 2006; Renumbers BS ISO 16000-1:2004 |
|
BSI BS EN ISO 16000-10 |
Indoor air Part 10: Determination of the emission of volatile organic compounds from building products and furnishing Emission test cell method |
|
BSI BS EN ISO 18472 |
Sterilization of health care products Biological and chemical indicators Test equipment |
|
BSI BS EN ISO 6360-1 |
Dentistry Number coding system for rotary instruments Part 1: General characteristics-Supersedes BS 6828-5.1:1987 |
|
BSI BS EN ISO 7886-4 |
Sterile hypodermic syringes for single use Part 4: Syringes with re-use prevention feature |
|
BSI BS ISO 10294-2 |
Fire Resistance Tests - Fire Dampers for Air Distribution Systems - Part 2: Classification, Criteria and Field of Application of Test Results |
|
BSI BS ISO 14520-10 |
Gaseous fire-extinguishing systems Physical properties and system design Part 10: HFC 23 extinguishant |
|
BSI BS ISO 14520-4 |
Gaseous Fire-Extinguishing Systems - Physical Properties and System Design - Part 4: FC-3-1-10 Extinguishant-Together with BS ISO 14520-1, BS ISO 14520-2, BS ISO 14520-3, BS ISO 14520-6, BS ISO 14520-7, BS ISO 14520-8,BS ISO 14520-9, BS ISO 14520-10, BS ISO 14520-11, BS ISO 14520-12, BS ISO 14520-13, BS ISO 14520-14, BS ISO 14520-15, It Supersedes DD 233:1996 Which is Withdrawn; |
|
BSI BS ISO 14520-6 |
Gaseous fire-extinguishing systems Physical properties and system design Part 6: HCFC Blend A extinguishant |
|
BSI PD 6609 |
Environmental Cleanliness in Enclosed Spaces - Guide to Test Methods |
|
BSI PD CEN/TR 14568 |
EN 54 Fire detection and fire alarm systems Interpretation of specific clauses of EN 54-2:1997 |
|
BSI PD CLC/TR 50427 |
Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation Guide |
|
BSI BS 7944 |
Type 1 Heavy Duty Fire Blankets and Type 2 Heavy Duty Heat Protective Blankets-Supersedes BS 6575: 1985; |
|
BSI BS 7967-2 |
Carbon monoxide in dwellings and the combustion performance of gas-fired appliances Part 2: Guide for using electronic portable combustion gas analysers in the measurement of carbon monoxide and the determination of combustion performance |
|
BSI BS EN 1073-1 |
Protective Clothing Against Radioactive Contamination - Part 1: Requirements and Test Methods for Ventilated Protective Clothing Against Particulate Radioactive Contamination |
|
BSI BS EN 13641 |
Elimination or Reduction of Risk of Infection Related to In Vitro Diagnostic Reagents |
|
BSI BS EN 1364-1 |
Fire Resistance Tests for Non-Loadbearing Elements - Part 1: Walls |
|
BSI BS EN 140 |
Respiratory Protective Devices - Half Masks and Quarter Masks - Requirements, Testing, Marking-Supersedes BS 7356: 1990; |
|
BSI BS EN 14593-1 |
Respiratory protective devices Compressed air line breathing apparatus with demand valve Part 1: Apparatus with a full mask Requirements, testing, marking-Together with BS EN 14593-2:2005 and BS EN 14594:2005 supersedes BS EN 139:1995 |
|
BSI BS EN 61217 |
Radiotherapy Equipment - Coordinates, Movements and Scales-AMD 13331:February 15, 2002; IEC 61217: 1996; |
|
BSI BS EN ISO 11140-3 |
Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test |
|
BSI BS EN ISO 11734 |
Water Quality - Evaluation of the |
|
BSI BS EN ISO 16672 |
Ophthalmic implants - Ocular endotamponades |
|
BSI BS EN ISO 17510-2 |
Sleep apnoea breathing therapy Part 2: Masks and application accessories |
|
BSI BS EN ISO 18777 |
Transportable liquid oxygen systems for medical use Particular requirements |
|
BSI BS EN ISO 5356-1 |
Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets |
|
BSI BS EN ISO 9703-3 |
Anaesthetic and Respiratory Care Alarm Signals - Part 3: Guidance on Application of Alarms |
|
BSI BS ISO 10294-4 |
Fire Resistance Tests - Fire Dampers for Air Distribution Systems - Part 4: Test of Thermal Release Mechanism |
|
BSI BS ISO 15705 |
Water quality Determination of the chemical oxygen demand index (ST-COD) Small-scale sealed-tube method-Also known as BS 6068-2.80:2002; |
|
BSI BS ISO 16603 |
Clothing for protection against contact with blood and body fluids Determination of the resistance of protective clothing materials to penetration by blood and body fluids Test method using synthetic blood |
|
BSI BS ISO 7240-15 |
Fire detection and alarm systems Part 15: Point type fire detectors using scattered light, transmitted light or ionization sensors in combination with a heat sensor-CORR 16081: March 2006 |
|
BSI PD CEN ISO/TR 11610 |
Protective clothing Vocabulary |
|
BSI PD ISO/TR 27628 |
Workplace atmospheres - Ultrafine, nanoparticle and nano-structured aerosols - Inhalation exposure characterization and assessment |
|
BSI BS 2909 |
Cabinets for the electrical euthanasia of dogs |
|
BSI BS 3970-1 |
Sterilizing and disinfecting equipment for medical products Part 1: Specification for general requirements-Partially Superseded by BS EN 1422: 1998 |
|
BSI BS 3970-5 |
Sterilizing and disinfecting equipment for medical products Part 5: Specification for low temperature steam disinfectors |
|
BSI BS 6068 SEC 2.50 |
Water Quality Part 2: Physical, Chemical and Biochemical Methods Section 2.50: Determination of pH (N) |
|
BSI BS 6068-3-2 |
Water Quality Part 3: Radiological Methods Section 3.2: Measurement of Gross Beta Activity in Non-Saline Water (ISO 9697: 1992) |
|
BSI BS 8468-2 |
Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents -Part 2: Negative pressure, air purifying devices with full face mask - Specification |
|
BSI BS EN 1005-5 |
Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency |
|
BSI BS EN 1060-3 |
Non-invasive sphygmomanometers Part 3: Supplementary requirements for electro-mechanical blood pressure measuring systems-AMD 16177: August 31, 2006 |
|
BSI BS EN 1073-2 |
Protective Clothing Against Radioactive Contamination - Part 2: Requirements and Test Methods for Non-Ventilated Protective Clothing Against Particulate Radioactive Contamination |
|
BSI BS EN 12182 |
Technical Aids for Disabled Persons - General Requirements and Test Methods |
|
BSI BS EN 13274-2 |
Respiratory Protective Devices - Methods of Test - Part 2: Practical Performance Tests |
|
BSI BS EN 134 |
Respiratory Protective Devices - Nomenclature of Components |
|
BSI BS EN 14143 |
Respiratory equipment Self-contained re-breathing diving apparatus |
|
BSI BS EN 14710-1 |
Fire-fighting pumps Fire-fighting centrifugal pumps without primer Part 1: Classification, general and safety requirements |
|
BSI BS EN 1497 |
Rescue Equipment - Rescue Harnesses (N) |
|
BSI BS EN 405 |
Respiratory Protective Devices - Valved Filtering Half Masks to Protect Against Gases or Gases and Particles - Requirements, Testing, Marking |
|
BSI BS EN 60325 |
Radiation protection instrumentation Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and monitors-BS IEC 60325:2002 |
|
BSI BS EN 689 |
Workplace Atmospheres - Guidance for the Assessment of Exposure by Inhalation to Chemical Agents for Comparison with Limit Values and Measurement Strategy-Also Known as BS 6069-3.7:1996 |
|
BSI BS EN 794-3 |
Lung ventilators Part 3: Particular requirements for emergency and transport ventilators-AMD 16094: April 28, 2006 |
|
BSI BS EN ISO 10075-1 |
Ergonomic Principles Related to Mental Work-Load - Part 1: General Terms and Definitions-ISO 10075:1991; |
|
BSI BS EN ISO 10079-2 |
Medical Suction Equipment - Part 2: Manually Powered Suction Equipment |
|
BSI BS EN ISO 10651-4 |
Lung Ventilators - Part 4: Particular Requirements for Operator-Powered Resuscitators-CORR 16254: September 2006; Partially Supersedes BS 6850:1987 |
|
BSI BS EN ISO 11986 |
Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Guidelines for the Determination of Preservative Uptake and Release-AMD 13224: June 2001; CORR 13428: October 11, 2001; Also Known as BS 7208-21: 2001; Renumbers BS ISO 11986: 1999 |
|
BSI BS EN ISO 12402-3 |
Personal flotation devices Part 3: Lifejackets, performance level 150 Safety requirements-:1994 |
|
BSI BS EN ISO 14738 |
Safety of machinery Anthropometric requirements for the design of workstations at machinery-CORR 16581: September 29, 2006 |
|
BSI BS EN ISO 22870 |
Point-of-care testing (POCT) Requirements for quality and competence |
|
BSI BS EN ISO 5667-19 |
Water quality Sampling Part 19: Guidance on sampling in marine sediments-Also Known as BS 6068-6.19:2004 |
|
BSI BS EN ISO 7887 |
Water Quality - Examination and Determination of Colour-Also Known as BS 6068 SEC 2.22:1995; Supersedes BS 6068: Section 2.22: 1986 |
|
BSI BS EN ISO 8536-11 |
Infusion equipment for medical use Part 11: Infusion filters for use with pressure infusion equipment |
|
BSI BS IEC 60861 |
Equipment for monitoring of radionuclides in liquid effluents and surface waters |
|
BSI BS ISO 11731-2 |
Water quality Detection and enumeration of Legionella Part 2: Direct membrane filtration method for waters with low bacterial counts-Also known as BS 6068-4.18:2004 |
|
BSI DD ENV 50354 |
Electrical Arc Test Methods for Material and Garments, for Use by Workers at Risk from Exposure to an Electrical Arc |
|
BSI BS 3367 |
Specification for Ropes and Lines for Fire Service Use Other Than for Rope Rescue Purposes |
|
BSI BS 6068 SEC 6.10 |
Water Quality Part 6: Sampling Section 6.10: Guidance on Sampling of Waste Waters (ISO 5667-10: 1992) |
|
BSI BS EN 1150 |
Protective Clothing - Visibility Clothing for Non-Professional Use - Test Methods and Requirements |
|
BSI BS EN 1201 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Potassium Dihydrogen Orthophosphate |
|
BSI BS EN 12132-2 |
Feather and down Methods of testing the down-proof properties of fabrics Part 2: Impact test-AMD 14532: November 18, 2003; |
|
BSI BS EN 13726-3 |
Non-active medical devices Test methods for primary wound dressings Part 3: Waterproofness |
|
BSI BS EN 14139 |
Ophthalmic optics Specifications for ready-to-wear spectacles-CORR 16762:November 30, 2006 |
|
BSI BS EN 1433 |
Drainage channels for vehicular and pedestrian areas Classification, design and testing requirements, marking and evaluation of conformity-AMD 16109: March 2006; CORR 16739: October 31, 2006 |
|
BSI BS EN 1483 |
Water quality - Determination of mercury - Method using atomic absorption spectrometry |