|
BSI BS 7253 PART 2 |
Non-Metallic Materials for Surgical Implants Part 2: Specification for Ceramic Materials Based on High Purity Alumina-ISO 6474: 1994; |
|
BSI BS 7313 PART 2 |
Prosthetics and Orthotics Part 2: Method of Describing Limb Deficiencies Present at Birth |
|
BSI BS 7313 SEC 1.2 |
Prosthetics and Orthotics Part 1: Terminology Section 1.2: Glossary of Terms Relating to External Limb Prostheses and Wearers of External Limb Prostheses |
|
BSI BS 748 |
Haemacytometer and Particle Counting Chambers |
|
BSI BS 7731 |
Method for Radiographic Examination of Cast Metallic Surgical Implants (ISO 9584: 1993) (N) |
|
BSI BS 7843 SEC 1.1 |
Guide to the Acquisition and Management of Meteorological Precipitation Data Part 1: Network Design Section 1.1: the User Requirement for Precipitation Data (N) |
|
BSI BS 7843 SEC 2.3 |
Guide to the Acquisition and Management of Meteorological Precipitation Data Part 2: Field Practices and Data Management Section 2.3: Data Management (N) |
|
BSI BS 8447 |
Anaesthetic and respiratory equipment - Hook-on fittings for the attachment of vaporizers to an anaesthetic gas delivery device |
|
BSI BS 8469 |
Personal protective equipment for firefighters - Assessment of ergonomic performance and compatibility - Requirements and test methods |
|
BSI BS EN 1093-2 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant |
|
BSI BS EN 1205 |
Chemicals used for treatment of water intended for human consumption Disodium dihydrogen pyrophosphate |
|
BSI BS EN 1206 |
Chemicals used for treatment of water intended for human consumption Tetrasodium pyrophosphate |
|
BSI BS EN 1209 |
Chemicals used for treatment of water intended for human consumption Sodium silicate |
|
BSI BS EN 1217 |
Materials and Articles in Contact with Foodstuffs - Test Methods for Water Absorption of Ceramic Articles |
|
BSI BS EN 12376 |
In Vitro Diagnostic Medical Devices - Information Supplied by the Manufacturer with in Vitro Diagnostic Reagents for Staining in Biology |
|
BSI BS EN 12441-10 |
Zinc and zinc alloys Chemical analysis Part 10: Determination of chromium and titanium in zinc alloys Spectrophotometric method |
|
BSI BS EN 12906 |
Products used for treatment of water intended for human consumption Pumice |
|
BSI BS EN 12907 |
Products used for the treatment of water intended for human consumption - Pyrolyzed coal material |
|
BSI BS EN 12920 |
Characterization of waste Methodology for the Determination of the Leaching Behaviour of Waste under Specified Conditions-:1998 |
|
BSI BS EN 13137 |
Characterization of Waste - Determination of Total Organic Carbon (TOC) in Waste, Sludges and Sediments |
|
BSI BS EN 13634 |
Protective Footwear for Professional Motorcycle Riders - Requirements and Test Methods |
|
BSI BS EN 13752 |
Products used for treatment of water intended for human consumption Manganese dioxide |
|
BSI BS EN 14039 |
Characterization of waste Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography |
|
BSI BS EN 14135 |
Coverings Determination of fire protection ability |
|
BSI BS EN 14204 |
Chemical disinfectants and antiseptics Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics used in the veterinary area Test method and requirements (phase 2, step 1) |
|
BSI BS EN 14664 |
Chemicals used for treatment of water intended for human consumption Iron(III) sulfate, solid |
|
BSI BS EN 14701-2 |
Characterization of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration |
|
BSI BS EN 14701-3 |
Characterization of sludges - Filtration properties - Part 3: Determination of the compressibility |
|
BSI BS EN 14786 |
Protective clothing Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions Atomizer test |
|
BSI BS EN 14884 |
Air quality Stationary source emissions Determination of total mercury: automated measuring systems |
|
BSI BS EN 15182-3 |
Hand-held branchpipes for fire service use - Part 3: Smooth bore jet and/or one fixed spray jet angle branchpipes PN 16 |
|
BSI BS EN 15204 |
Water quality Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermohl technique) |
|
BSI BS EN 1657 |
Chemical disinfectants and antiseptics Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area Test method and requirements (phase 2, step 1) |
|
BSI BS EN 1827 |
Corr.1 Respiratory Protective Devices - Half Masks without Inhalation Valves and with Separable Filters to Protect Against Gases or Gases and Particles Only - Requirements, Testing, Marking-CORR 10669; August 1999; |
|
BSI BS EN 21942-3 |
Dental Vocabulary Part 3: Dental Instruments (ISO 1942-3: 1989) (N) |
|
BSI BS EN 26461-1 |
Water Quality - Detection and Enumeration of the Spores of Sulfite-Reducing Anaerobes (Clostridia) - Part 1: Method by Enrichment in a Liquid Medium-Also Known as (BS 6068-4.8):1993; ISO 6461-1:1986 |
|
BSI BS EN 27787-3 |
Dental Rotary Instruments - Cutters Part 3: Carbide Laboratory Cutters for Milling Machines (ISO 7787-3: 1994) (AMD 8281) October 15, 1994 (Formerly BS 6828: Part 8.3) (N)-Amd 1; |
|
BSI BS EN 27828 |
Water Quality - Methods of Biological Sampling - Guidance on Handnet Sampling of Aquatic Benthic Macro-Invertebrates-AMD 8179: June 15,1994; Renumbers BS 6068-5.5:1985; ISO 7828: 1985 |
|
BSI BS EN 28265 |
Water Quality Design and Use of Quantitative Samplers for Benthic Macro-Invertebrates on Stony Substrata in Shallow Freshwaters-AMD 8180: June 15,1994; Renumbers BS 6068-5.8:1989; ISO 8265: 1988 |
|
BSI BS EN 50134-5 |
Alarm systems Social alarm systems Part 5: Interconnections and communications |
|
BSI BS EN 50286 |
Electrical Insulating Protective Clothing for Low-Voltage Installations-CORR 15613: May 6, 2005 |
|
BSI BS EN 591 |
Instructions for Use for In Vitro Diagnostic Instruments for Professional Use |
|
BSI BS EN 61205 |
Ultrasonics - Dental Descaler Systems - Measurement and Declaration of the Output Characteristics (IEC 1205: 1993) (N) |
|
BSI BS EN 61331-2 |
Protective devices against diagnostic medical X-radiation Part 2: Specification for protective glass plates-AMD 13969: November 25, 2002; Renumbers BS 7817-2: 1995; |
|
BSI BS EN 61331-3 |
Protective Devices Against Diagnostic Medical X-Radiation - Part 3: Protective Clothing and Protective Devices for Gonads-Also Known as BS 7817-3:1999; IEC 61331-3:1998 |
|
BSI BS EN 61526 |
Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters and monitors-CORR 17102: June 29, 2007 |
|
BSI BS EN 62274 |
Medical electrical equipment Safety of radiotherapy record and verify systems |
|
BSI BS EN 838 |
Workplace Atmospheres - Diffusive Samplers for the Determination of Gases and Vapours - Requirements and Test Methods |
|
BSI BS EN 883 |
Chemicals used for treatment of water intended for human consumption Polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulfate |
|
BSI BS EN ISO 10139-2 |
Dentistry - Soft Lining Materials for Removable Dentures - Part 2: Materials for Long-Term Use |
|
BSI BS EN ISO 10477 |
Dentistry - Polymer-Based Crown and Bridge Materials-CORR 13104:March 2001; Renumbers BS 7651:1993; |
|
BSI BS EN ISO 10940 |
Ophthalmic Instruments - Fundus Cameras |
|
BSI BS EN ISO 10979-3 |
Ophthalmic implants Intraocular lenses Part 3: Mechanical properties and test methods-:2000 |
|
BSI BS EN ISO 11199-2 |
Walking Aids Manipulated by Both Arms - Requirements and Test Methods - Part 2: Rollators |
|
BSI BS EN ISO 11199-3 |
Walking aids manipulated by both arms Requirements and test methods Part 3: Walking tables |
|
BSI BS EN ISO 11715-1 |
Corr.1 Opthalmic Optics - Format of Digital Data Files for Data Transfer for Profiling of Spectacle Lenses - Part 1: Two-Dimensional Tracers-CORR 10288; October 15, 1998; |
|
BSI BS EN ISO 11987 |
Ophthalmic Optics - Contact Lenses - Determination of Shelf-Life-CORR 9954: March 1998; Also Known as BS 7208-14: 1998; Supersedes BS 7208 PART 3:1992 |
|
BSI BS EN ISO 13294 |
Dental Handpieces - Dental Air-Motors |
|
BSI BS EN ISO 13397-1 |
Periodontal Curettes, Dental Scalers and Excavators Part 1: General Requirements (N) |
|
BSI BS EN ISO 13478 |
Thermoplastics Pipes for the Conveyance of Fluids - Determination of Resistance to Rapid Crack Propagation (RCP) - Full-Scale Test |
|
BSI BS EN ISO 15098-1 |
Dental Tweezers - Part 1: General Requirements |
|
BSI BS EN ISO 15098-3 |
Dental Tweezers - Part 3: College Types |
|
BSI BS EN ISO 15536-1 |
Ergonomics Computer manikins and body templates Part 1: General requirements |
|
BSI BS EN ISO 22803 |
Dentistry Membrane materials for guided tissue regeneration in oral and maxillofacial surgery Contents of a technical file |
|
BSI BS EN ISO 3107 |
Dentistry Zinc oxide/eugenol and zinc oxide/non-eugenol cements-Supersedes BS 7214:1989 |
|
BSI BS EN ISO 6875 |
Dental Equipment - Dental Patient Chair |
|
BSI BS EN ISO 8612 |
Ophthalmic Instruments - Tonometers |
|
BSI BS EN ISO 8689-1 |
Water Quality - Biological Classification of Rivers - Part 1: Guidance on the Interpretation of Biological Quality Data from Surveys of Benthic Macroinvertebrates-Also Known as BS 6068-5.26:2000 |
|
BSI BS EN ISO 9173-1 |
Dentistry Extraction forceps Part 1: General requirements and test methods |
|
BSI BS EN ISO 9873 |
Dental Hand Instruments - Reusable Mirrors and Handles-Supersedes BS EN 29873: 1994; |
|
BSI BS ISO 10542-2 |
Technical Systems and Aids for Disabled or Handicapped Persons - Wheelchair Tiedown and Occupant-Restraint Systems - Part 2: Four-Point Strap-Type Tiedown Systems |
|
BSI BS ISO 11040-4 |
Prefilled syringes - Part 4: Glass barrels for injectables |
|
BSI BS ISO 11174 |
Workplace Air - Determination of Particulate Cadmium and Cadmium Compounds - Flame and Electro-Thermal Atomic Absorption Spectrometric Method |
|
BSI BS ISO 11418-2 |
Containers and accessories for pharmaceutical preparations Part 2: Screw-neck glass bottles for syrups |
|
BSI BS ISO 11418-4 |
Containers and accessories for pharmaceutical preparations Part 4: Tablet glass bottles |
|
BSI BS ISO 13765-3 |
Refractory mortars Part 3: Determination of joint stability-Together with BS ISO 13765-1, -2 and -4 thru -6:1991 |
|
BSI BS ISO 14243-2 |
Implants for Surgery - Wear of Total Knee Joint Prostheses - Part 2: Methods of Measurement |
|
BSI BS ISO 15032 |
Prostheses - Structural Testing of Hip Joints |
|
BSI BS ISO 15142-1 |
Implants for surgery Metal intramedullary nailing systems Part 1: Intramedullary nails-BS ISO 15142-2: 2003 and BS ISO 15142-3:2003 supersedes BS 3531-14.1: 1990 ; |
|
BSI BS ISO 15621 |
Urine-Absorbing Aids - General Guidance on Evaluation |
|
BSI BS ISO 16121-2 |
Road vehicles Ergonomic requirements for the driver’s workplace in line-service buses Part 2: Visibility |
|
BSI BS ISO 16772 |
Soil quality Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry |
|
BSI BS ISO 17353 |
Water quality Determination of selected organotin compounds Gas chromatographic method |
|
BSI BS ISO 20282-1 |
Ease of operation of everyday products Part 1: Design requirements for context of use and user characteristics |
|
BSI BS ISO 5834-5 |
Implants for surgery Ultra-high molecular-weight polyethylene Part 5: Morphology assessment method |
|
BSI BS ISO 7176-21 |
Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters |
|
BSI BS ISO 7176-8 |
Wheelchairs - Part 8: Requirements and Test Methods for Static, Impact and Fatigue Strengths |
|
BSI BS ISO 8009-2 |
Reusable Rubber Contraceptive Diaphragms Part 2: Determination of Size-Together with BS ISO 8009: Part 1 and Parts 3 to 10, This Document Supersedes BS 4028: 1989; |
|
BSI BS ISO 8009-3 |
Reusable Rubber Contraceptive Diaphragms Part 3: Determination of Dome Thickness-Together with BS ISO 8009: Parts 1 and 2 and Parts 4 to 10, This Document Supersedes BS 4028: 1989; |
|
BSI BS ISO 8009-6 |
Reusable Rubber Contraceptive Diaphragms Part 6: Determination of Deterioration After Accelerated Ageing-Together with BS ISO 8009: Parts 1 to 5, and Parts 7 to 10, it Supersedes BS 4028: 1989; |
|
BSI BS ISO 8009-9 |
Reusable Rubber Contraceptive Diaphragms Part 9: Packaging and Labelling-Together with BS ISO 8009: Parts 1 to 8, and Part 10, it Supersedes BS 4028: 1989; |
|
BSI BS ISO 8038-2 |
Optics and Optical Instruments - Screw Threads for Microscope Objectives and Related Nosepieces - Part 2: Screw Thread Type M25 x 0,75 mm |
|
BSI DD CEN/TS 14405 |
Characterization of waste Leaching behaviour tests Up-flow percolation test (under specified conditions) |
|
BSI DD CLC/TS 62046 |
Safety of machinery Application of protective equipment to detect the presence of persons |
|
BSI DD ENV 1068 |
Medical Informatics - Healthcare Information Interchange - Registration of Coding Schemes |
|
BSI DD ENV ISO/TR 13843 |
Water Quality - Guidance on Validation of Microbiological Methods-CORR 13488: October 11,2001; |
|
BSI DD IEC TS 61334-5-5 |
Distribution automation using distribution line carrier systems Part 5-5: Lower layer profiles Spread spectrum-fast frequency hopping (SS-FFH) profile |
|
BSI PD 6630 |
Nomenclature System for Medical Devices for the Purpose of Regulatory Data Exchange - Rationale |
|
BSI PD CEN/TR 15175 |
Characterization of sludges - Protocol for organizing and conducting interlaboratory tests of methods for chemical and microbiological analysis of sludges |
|
BSI PD CLC/TR 50479 |
Electrical installation guide - Selection and erection of electrical equipment - Wiring systems - Limitation of temperature rise of connecting interfaces |
|
BSI PD CR 12401 |
Dentistry Guidance on the classification of dental devices and accessories-Supersedes PD 6618:1997 |
|
BSI PD ISO/TR 13570 |
Guidelines for the Appplication of the ISO 7176 Series on Wheelchairs-ISO/TR 13570:2001; |
|
BSI BS 1439 |
Single-Ply Wet-Creped Paper Towelling |
|
BSI BS 1715-2.4 |
Analysis of Soaps Part 2: Quantitative Test Methods Section 2.4: Method for Determination of Free Fatty Acids Content |
|
BSI BS 1715-2.5 |
Analysis of Soaps Part 2: Quantitative Test Methods Section 2.5: Method for Determination of Unsaponifiable, Unsaponified, and Unsaponified Saponifiable Matter Contents (ISO 1067-1974) |
|
BSI BS 1715-2.8 |
Analysis of Soaps Part 2: Quantitative Test Methods Section 2.8: Method for Determination of Glycerol Content (ISO 1066-1975) |
|
BSI BS 3259 |
Peters' Aural Specula |
|
BSI BS 3445 PART 2 |
Agricultural Water Troughs and Water Fittings Part 2: Code of Practice for Installation and Operation |
|
BSI BS 3886 |
Dental Impression Compounds |
|
BSI BS 4031 |
X-Ray Protective Lead Glasses |
|
BSI BS 4272-2 |
Anaesthetic and Analgesic Machines - Part 2: Specification for Intermittent (Demand) Flow Analgesic Machines for Use with 50/50 % (V/V) Nitrous Oxide and Oxygen-AMD 13963: January 14, 2003; |
|
BSI BS 4272-3 |
Anaesthetic and analgesic machines - Part 3: Specification for continuous flow anaesthetic machines-AMD 6506: December 1990; |
|
BSI BS 4751 |
Mobile Sanitary Chairs |
|
BSI BS 4997 |
Wooden Axilla Crutches-Partially Superseded by BS EN 1985: 1999 |
|
BSI BS 6083 PART 11 |
Hearing Aids Part 11: Specification for Symbols and Other Markings on Hearing Aids and Related Equipment (AMD 6187) October 31, 1990 (N)-Amd 1; |
|
BSI BS 6655 |
Pure Tone Air Conduction Threshold Audiometry for Hearing Conservation Purposes (AMD 7339) October 15, 1992-Amd 1; |
|
BSI BS 6706 |
Disposable Glass Serological Pipettes (AMD 7384) December 15, 1992-Amd 1; |
|
BSI BS 6850 |
Gas Powered Ventilatory Resuscitators |
|
BSI BS 6859 PART 1 |
Operating Tables Part 1: Mobile General Operating Tables |
|
BSI BS 6935 PART 5 |
Wheelchair Tests Part 5: Methods for Determination of Overall Dimensions, Mass and Turning Space |
|
BSI BS 7208 PART 2 |
Contact Lenses Part 2: Method of Classifying Contact Lens Materials |
|
BSI BS 7254 PART 4 |
Orthopaedic Implants Part 4: Recommendations for Retrieval and Examination of Implants and Associated Tissues |
|
BSI BS 7254 PART 5 |
Orthopaedic Implants Part 5: Production of Castings Made of Cobalt- Chromium-Molybdenum Alloy |
|
BSI BS 7254: PART 3 |
Orthopaedic Implants Part 3: Recommendations for Care and Handling-Replaces BS 3531: Part 17: 1985; |
|
BSI BS 7313 SEC 1.3 |
Prosthetics and Orthotics Part 1: Terminology Section 1.3: Glossary of Terms Relating to External Orthoses |
|
BSI BS 7327 PART 1 |
Small Fixed Fire Extinguishers Part 1: Small Fixed Halon Fire Extinguishers |
|
BSI BS 7843 SEC 2.2 |
Guide to the Acquisition and Management of Meteorological Precipitation Data Part 2: Field Practices and Data Management Section 2.2: Methods of Observation and Data Tabulation (N) |
|
BSI BS 7971-10 |
Protective clothing and equipment for use in violent situations and in training Part 10: Coveralls Requirements and test methods |
|
BSI BS 7971-5 |
Protective clothing and equipment for use in violent situations and in training Part 5: Footwear Requirements and test methods |
|
BSI BS 7982 |
Guidance on the Environmental Impact of Large-Scale Fires Involving Plastics Materials |
|
BSI BS 8414-2 |
Fire performance of external cladding systems Part 2: Test method for non-loadbearing external cladding systems fixed to and supported by a structural steel frame |
|
BSI BS 8432 |
Spinal orthoses Guide to design-Supersedes BS 5473: 1977 |
|
BSI BS EN 12176 |
Characterization of Sludge - Determination of pH Value |
|
BSI BS EN 12254 |
Screens for Laser Working Places - Safety Requirements and Testing-AMD 14415: June 12,2003; |
|
BSI BS EN 12914 |
Products Used for Treatment of Water Intended for Human Consumption - Powdered Perlite |
|
BSI BS EN 12919 |
Workplace Atmospheres - Pumps for the Sampling of Chemical Agents with a Volume Flow Rate of Over 5 l/min - Requirements and Test Methods |
|
BSI BS EN 13014 |
Connections for gas sampling tubes to anaesthetic and respiratory equipment-CORR 14062: December 16, 2002; |
|
BSI BS EN 13052-1 |
Influence of Materials on Water Intended for Human Consumption - Organic Materials - Determination of Colour and Turbidity of Water in Piping Systems - Part 1: Test Method |
|
BSI BS EN 13211 |
Air Quality - Stationary Source Emissions - Manual Method of Determination of the Concentration of Total Mercury |
|
BSI BS EN 13440 |
Packaging Rate of recycling Definition and method of calculation |
|
BSI BS EN 13486 |
Temperature Recorders and Thermometers for the Transport, Storage and Distribution of Chilled, Frozen, Deep-Frozen, Deep-Frozen/Quick-Frozen Food and Ice Cream - Periodic Verification |
|
BSI BS EN 13754 |
Products used for treatment of water intended for human consumption Bentonite |
|
BSI BS EN 13781 |
Protective Helmets for Drivers and Passengers of Snowmobiles and Bobsleighs |
|
BSI BS EN 13826 |
Peak expiratory flow meters |
|
BSI BS EN 14184 |
Water quality Guidance standard for the surveying of aquatic macrophytes in running waters-Also known as BS 6068-5.34: 2003; |
|
BSI BS EN 14207 |
Water quality - Determination of epichlorohydrin-Also Known as BS 6068-2.81: 2002; |
|
BSI BS EN 14347 |
Chemical disinfectants and antiseptics Basic sporicidal activity Test method and requirements (phase 1, step 1) |
|
BSI BS EN 14349 |
Chemical disinfectants and antiseptics Quantitative surface test for the evaluation of bacterial activity of chemical disinfectants and antiseptics used in veterinary field on non-porous surfaces without mechanical action Test method and requirements (phase 2, step 2) |
|
BSI BS EN 14595 |
Tanks for transport of dangerous goods Service equipment for tanks Pressure and vacuum breather vent |
|
BSI BS EN 14614 |
Water quality Guidance standard for assessing the hydromorphological features of rivers-Also known as BS 6068-5.36:2004 |
|
BSI BS EN 14625 |
Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry-Supersedes BS ISO 13964:1998 |
|
BSI BS EN 14672 |
Characterization of sludges Determination of total phosphorus |
|
BSI BS EN 14675 |
Chemical disinfectants and antiseptics Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary field Test method and requirements (phase 2, step 1) |
|
BSI BS EN 15110 |
Water quality Guidance standard for the sampling of zooplankton from standing waters-Also known as BS 6068-5.41:2006 |
|
BSI BS EN 15182-1 |
Hand-held branchpipes for fire service use - Part 1: Common requirements |
|
BSI BS EN 15182-4 |
Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40 |
|
BSI BS EN 15196 |
Water quality Guidance on sampling and processing of the pupal exuviae of Chironomidae (Order Diptera) for ecological assessment-: 2006 |
|
BSI BS EN 15207 |
Tanks for transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage |
|
BSI BS EN 1639 |
Dentistry Medical devices for dentistry Instruments |
|
BSI BS EN 1644-2 |
Test Methods for Nonwoven Compresses for Medical Use - Part 2: Finished Compresses |
|
BSI BS EN 1659 |
In Vitro Diagnostic Systems - Culture Media for Microbiology - Terms and Definitions |
|
BSI BS EN 21942-4 |
Dental vocabulary Part 4: Dental equipment-ISO 1942-4: 1989; |
|
BSI BS EN 26595 |
Water Quality - Determination of Total Arsenic - Silver Diethyldithiocarbamate Spectrophotometric Method-AMD 7427:May 15, 1993; Renumbers BS 6068 SEC 2.1: 1983; ISO 6695: 1982 |
|
BSI BS EN 29168 |
Dental Handpieces - Hose Connectors (ISO 9168: 1991) (N) |
|
BSI BS EN 60627 |
Diagnostic X-ray imaging equipment Characteristics of general purpose and mammographic anti-scatter grids-CORR 14056: October 23, 2002; IEC 60627: 2001; Supersedes BS 5913: 1980; |
|
BSI BS EN 61220 |
Ultrasonics - Fields - Guidance for the Measurement and Characterization of Ultrasonic Fields Generated by Medical Ultrasonic Equipment Using Hydrophones in the Frequency Range 0.5 MHz to 15 MHz (IEC 1220: 1993) (N) |
|
BSI BS EN ISO 10323 |
Dental Rotary Instruments - Bore Diameters for Discs and Wheels |
|
BSI BS EN ISO 10341 |
Ophthalmic Instruments - Refractor Heads-AMD 10606: September 1999; Renumbers BS ISO 10341: 1997 |
|
BSI BS EN ISO 10637 |
Dental Equipment - High- and Medium-Volume Suction Systems |
|
BSI BS EN ISO 10650-1 |
Dentistry Powered polymerization activators Part 1: Quartz tungsten halogen lamps |
|
BSI BS EN ISO 10695 |
Water Quality - Determination of Selected Organic Nitrogen and Phosphorus Compounds - Gas Chromatographic Methods |
|
BSI BS EN ISO 10705-2 |
Water Quality - Detection and Enumeration of Bacteriophages - Part 2: Enumeration of Somatic Coliphages-CORR 10977: June 2000; AMD 13447: November 2001; Renumbers BS 6068-4.13:2000; ISO 10705-2:2000 |
|
BSI BS EN ISO 10943 |
Ophthalmic Instruments - Indirect Ophthalmoscopes |
|
BSI BS EN ISO 10944 |
Ophthalmic Optics - Synoptophores |
|
BSI BS EN ISO 12865 |
Ophthalmic instruments - Retinoscopes |
|
BSI BS EN ISO 12867 |
Ophthalmic Instruments - Trial Frames |
|
BSI BS EN ISO 13397-2 |
Dentistry Periodontal curettes, dental scalers and excavators Part 2: Periodontal curettes of Gr-type |
|
BSI BS EN ISO 13716 |
Dentistry - Reversible-Irreversible Hydrocolloid Impression Material Systems |
|
BSI BS EN ISO 13753 |
Mechanical Vibration and Shock - Hand-Arm Vibration - Method for Measuring the Vibration Transmissibility of Resilient Materials When Loaded by the Hand-Arm System |
|
BSI BS EN ISO 13997 |
Protective Clothing - Mechanical Properties - Determination of Resistance to Cutting by Sharp Objects |
|
BSI BS EN ISO 15087-4 |
Dental Elevators - Part 4: Coupland Elevators |
|
BSI BS EN ISO 15087-6 |
Dental Elevators - Part 6: Flohr Elevators |
|
BSI BS EN ISO 15098-2 |
Dental Tweezers - Part 2: Meriam Types |
|
BSI BS EN ISO 15253 |
Ophthalmic Optics and Instruments - Optical Devices for Low-Vision Aids-CORR 13964: August 2, 2002; Supersedes BS 7522-1: 1992 and BS 7522-2: 1993 |
|
BSI BS EN ISO 15254 |
Ophthalmic optics and instruments - Electro-optical devices for enhancing low vision-CORR 14184: October 16, 2002; |
|
BSI BS EN ISO 15265 |
Ergonomics of the thermal environment Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions |
|
BSI BS EN ISO 15681-1 |
Water quality Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Part 1: Method by flow injection analysis (FIA)-CORR 15002:February 18, 2004; AMD 15545:February 7, 2005; CORR 15596:February 11, 2005; Renumbers BS ISO 15681-1:2003; Also known as BS 6068-2.86:2004 |
|
BSI BS EN ISO 15841 |
Dentistry Wires for use in orthodontics |
|
BSI BS EN ISO 15912 |
Dentistry Casting investments and refractory die materials-Supersedes BS EN ISO 11244:2000, BS EN ISO 11245:2000, BS EN ISO 11246:2000, BS EN ISO 7490:2001 and BS EN ISO 9694:1999 |
|
BSI BS EN ISO 16284 |
Ophthalmic optics Information interchange for ophthalmic optical equipment |
|
BSI BS EN ISO 16588 |
Water quality Determination of six complexing agents Gas-chromatographic method-AMD 14910: January 23, 2004; Also Known as BS 6068-2.82: 2003; Renumbers BS ISO 16588: 2002; |
|
BSI BS EN ISO 16665 |
Water quality Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna-Also known as BSI BS 6068-5.38:2005 |
|
BSI BS EN ISO 16712 |
Water quality Determination of acute toxicity of marine or estuarine sediment to amphipods-AMD 16801:December 29, 2006; Renumbers BS ISO 16712 |
|
BSI BS EN ISO 19116 |
Geographic information Positioning services-AMD 16381: August 2006;: 2005 |
|
BSI BS EN ISO 19980 |
Ophthalmic instruments Corneal topographers |
|
BSI BS EN ISO 21530 |
Dentistry Materials used for dental equipment surfaces Determination of resistance to chemical disinfectants |
|
BSI BS EN ISO 21533 |
Dentistry Reusable cartridge syringes intended for intraligamentary injections-CORR 14762: October 20, 2003; |
|
BSI BS EN ISO 21671 |
Dentistry Rotary polishers |
|
BSI BS EN ISO 22112 |
Dentistry Artificial teeth for dental prostheses-:1996 and (BS EN ISO 4824):1997 |
|
BSI BS EN ISO 24234 |
Dentistry Mercury and alloys for dental amalgam-Supersedes BS EN ISO 1559:2001 and BS 4227:1986 |
|
BSI BS EN ISO 3630-2 |
Dental Root-Canal Instruments - Part 2: Enlargers-Supersedes BS EN 23630-2: 1992; |
|
BSI BS EN ISO 389-5 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz |
|
BSI BS EN ISO 6873 |
Dental Gypsum Products-Supersedes BS 7013: 1989; |
|
BSI BS EN ISO 7029 |
Acoustics - Statistical Distribution of Hearing Thresholds as a Function of Age-Supersedes BS 6957:1988; |
|
BSI BS EN ISO 7488 |
Dental Amalgamators (N) |
|
BSI BS EN ISO 7786 |
Dental Rotary Instruments - Laboratory Abrasive Instruments-CORR 13334:July 2001; Supersedes BS EN 27786:1992; |
|
BSI BS EN ISO 7885 |
Sterile Dental Injection Needles for Single Use |
|
BSI BS EN ISO 8282 |
Dental Equipment - Mercury and Alloy Mixers and Dispensers |
|
BSI BS EN ISO 8871-4 |
Elastomeric parts for parenterals and for devices for pharmaceutical use Part 4: Biological requirements and test methods |
|
BSI BS EN ISO 8891 |
Dental Casting Alloys with Noble Metal Content of at Least 25% but Less than 75% |
|
BSI BS EN ISO 9687 |
Dental Equipment - Graphical Symbols (AMD 9232) September 15 1996 (N)-Amd 1; |
|
BSI BS EN ISO 9997 |
Dental Cartridge Syringes-Supersedes BS 7432: 1991; |
|
BSI BS ISO 10705-4 |
Water quality Detection and enumeration of bacteriophages Part 4: Enumeration of bacteriophages infecting Bacteriodes fragilis-Also known as BS 6068-4.17:2001 |
|
BSI BS ISO 11418-3 |
Containers and accessories for pharmaceutical preparations Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms |
|
BSI BS ISO 13405-2 |
Prosthetics and Orthotics - Classification and Description of Prosthetic Components Part 2: Description of Lower-Limb Prosthetic Components |
|
BSI BS ISO 13994 |
Clothing for Protection Against Liquid Chemicals - Determination of the Resistance of Protective Clothing Materials to Penetration by Liquids under Pressure |
|
BSI BS ISO 14879-1 |
Implants for Surgery - Total Knee-Joint Prostheses - Part 1: Determination of Endurance Properties of Knee Tibial Trays |
|
BSI BS ISO 14997 |
Optics and optical instruments Test methods for surface imperfections of optical elements |
|
BSI BS ISO 15142-3 |
Implants for surgery Metal intramedullary nailing systems Part 3: Connection devices and reamer diameter measurements-Together both BS ISO 15142-1 and BS ISO 15142-2:2003 supersedes BS 3531-14.1: 1990; |
|
BSI BS ISO 16038 |
Rubber condoms Guidance on the use of ISO 4074 in the quality management of natural rubber latex condoms |
|
BSI BS ISO 16429;03/305240 DC |
Implants for surgery - Long-term measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices |
|
BSI BS ISO 17166 |
Erythema Reference Action Spectrum and Standard Erythema Dose |
|
BSI BS ISO 19258 |
Soil quality Guidance on the determination of background values |
|
BSI BS ISO 22608 |
Protective clothing Protection against liquid chemicals Measurement of repellency, retention, and penetration of liquid pesticide formulations through protective clothing materials |
|
BSI BS ISO 23470 |
Soil quality - Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution |
|
BSI BS ISO 7176-4 |
Wheelchairs Part 4: Energy Consumption of Electric Wheelchairs and Scooters for Determination of Theoretical Distance Range |
|
BSI BS ISO 8009-4 |
Reusable Rubber Contraceptive Diaphragms Part 4: Freedom from Visible Defects-Together with BS ISO 8009: Parts 1 to 3 and Parts 5 to 10, it Supersedes BS 4028: 1989; |
|
BSI BS ISO 8009-7 |
Reusable Rubber Contraceptive Diaphragms Part 7: Determination of Compression Resistance of Coil Spring and Flat Spring Diaphragms-Together with BS ISO 8009: Parts 1 to 6, and Parts 8 to 10, it Supersedes BS 4028: 1989; |
|
BSI BS ISO 8009-8 |
Reusable Rubber Contraceptive Diaphragms Part 8: Determination of Twisting During Compression of Coil Spring and Flat Spring Diaphragms-Together with BS ISO 8009: Parts 1 to 7, and Parts 9 to 10, it Supersedes BS 4028: 1989; |
|
BSI BS ISO 8600-2 |
Optics and Optical Instruments Medical Endoscopes and Endoscopic Accessories Part 2: Particular Requirements for Rigid Bronchoscopes |
|
BSI BS ISO 9921-1 |
Ergonomic Assessment of Speech Communication: Part 1: Speech Interference Level and Communication Distances for Persons with Normal Hearing Capacity in Direct Communication (SIL Method) |
|
BSI DD CEN/TS 14793 |
Stationary source emission Intralaboratory validation procedure for an alternative method compared to a reference method |
|
BSI DD ISO/TS 18835 |
Inhalational anaesthesia systems Draw-over vaporizers and associated equipment |
|
BSI PD 6540 |
Dental Implants - Guidelines for Developing Dental Implants (ISO/TR 11175: 1993) (N) |
|
BSI PD 6587 |
Profiles for Medical Image Interchange (CR 12069: 1995) (N) |
|
BSI PD 6610 |
Medical Informatics - Methodology for the Development of Healthcare Messages |
|
BSI PD CEN/TR 14819-2 |
Safety recommendations for cableway installations designed to carry persons Prevention and fight against fire Part 2: Other funicular railways and other installations |
|
BSI PD CEN/TR 14922 |
Portable fire extinguishers Model laboratory Report in compliance with EN 3-7 |
|
BSI PD CEN/TR 15018 |
Characterization of waste Digestion of waste samples using alkali-fusion techniques |
|
BSI PD IEC/TR 61948-3 |
Nuclear medicine instrumentation Routine tests Part 3: Positron emission tomographs-IEC/TR 61948-3:2005 |
|
BSI BS 1715-2.6 |
Analysis of Soaps Part 2: Quantitative Test Methods Section 2.6: Method for Determination of Moisture and Volatile Matter Content (ISO 672-1978) |
|
BSI BS 1715-2.7 |
Analysis of Soaps Part 2: Quantitative Test Methods Section 2.7: Method for Determination of Chloride Content (ISO 4323: 1977) |
|
BSI BS 1922 |
Specification for glass dispensing measures for pharmaceutical purposes-AMD 15032:September 3, 2004 |
|
BSI BS 1929 |
Screw Threads and External Dimensions of Lamps for Endoscopic and Diagnostic Instruments |
|
BSI BS 3043 |
Specification for Storage Envelopes for Processed X-Ray Films for Medical Radiography-AMD 1662: February 1975 |
|
BSI BS 3221 PART 7 |
Medicine Measures Part 7: Specification for Oral Syringes Delivering Doses Up to and Including 5 ml (N) |
|
BSI BS 3507 |
Orthodontic Wire and Tape and Dental Ligature Wire |
|
BSI BS 3985 |
Haemiglobincyanide (cyanmethaemoglobin) preparation as a standard for spectrometric haemoglobinometry |
|
BSI BS 4269 PART 2 |
Dental Elastic Impression Material Part 2: Specification for Alginate Impression Material (ISO 1563: 1990) (AMD 7037) May 1, 1992-Amd 1; |
|
BSI BS 5724 SEC 3.26 |
Medical Electrical Equipment Part 3: Particular Requirements for Performance Section 3.26: Method for Declaring Parameters for Ultrasonic Diagnostic Equipment Using Test Objects |
|
BSI BS 5724-3.1: SUPP 1 |
Medical electrical equipment Part 3: Particular requirements for performance Section 3.1 Methods of declaring functional performance characteristics of medical electron accelerators in the range 1 MeV to 50 MeV Supplement 1: Guide to functional performance values-AMD 14212:March 25, 2003; IEC 977:1989; |
|
BSI BS 6068 SEC 2.20 |
Water Quality Part 2: Physical, Chemical and Bio-Chemical Methods Section 2.20: Methods for Determination of Cyanide by Diffusion at pH6 |
|
BSI BS 6069 SEC 4.2 |
Characterization of Air Quality Part 4: Stationary Source Emissions Section 4.2: Method for the Determination of Asbestos Plant Emissions by Fibre Count Measurement |
|
BSI BS 6083 PART 9 |
Hearing Aids Part 9: Methods for Measurement of Characteristics of Hearing Aids with Bone Vibrator Output (AMD 6186) October 31, 1990-Amd 1; |
|
BSI BS 6090 |
Personal Photographic Dosemeters |
|
BSI BS 6155 |
Tracheal Tubes for Large Animals in Veterinary Anaesthesia-AMD 13225; August 2001; |
|
BSI BS 6905 |
Method for Estimation of Concentration of Disinfectants Used in 'Dirty' Conditions in Hospitals by the Modified Kelsey-Sykes Test (AMD 8277) November 15, 1994 (N)-Amd 1; |
|
BSI BS 7088 |
Pneumatic Tourniquet Equipment |
|
BSI BS 7126 PART 1 |
Urine Collection Bags Part 1: Glossary of Terms (ISO 8669-1: 1988) |
|
BSI BS 7127 PART 1 |
Ostomy Collection Bags Part 1: Glossary of Terms (ISO 8670-1: 1988) |
|
BSI BS 7252 PART 1 |
Metallic Materials for Surgical Implants Part 1: Specification for Wrought Stainless Steel-ISO 5832-1: 1997; |
|
BSI BS 7252 PART 11 |
Metallic Materials for Surgical Implants Part 11: Specification for Wrought Titanium 6-Aluminium 7-Niobium Alloy (ISO 5832-11: 1994) (N) |
|
BSI BS 7252 PART 12 |
Metallic Materials for Surgical Implants Part 12: Specification for Wrought Cobalt-Chromium-Molybdenum Alloy-ISO 5832-12: 1996; |
|
BSI BS 7252 PART 13 |
Metallic Materials for Surgical Implants Part 13: Specification for Unalloyed Tantalum for Surgical Implant Applications-ISO 13782: 1996; |
|
BSI BS 7252 PART 8 |
Metallic Materials for Surgical Implants Part 8: Specification for Wrought Cobalt-Nickel-Chromium-Molybdenum-Tungsten-Iron Alloy-ISO 5832-8: 1997; |
|
BSI BS 7313 PART 3 |
Prosthetics and Orthotics Part 3: Method of Describing Lower Limb Amputation Stumps (ISO 8548-2: 1993) (N) |
|
BSI BS 7313 SEC 1.1 |
Prosthetics and Orthotics Part 1: Terminology Section 1.1: Glossary of General Terms Relating to External Limb Prostheses and External Orthoses |
|
BSI BS 7659 |
Dog Muzzles (N) |
|
BSI BS 7710 PART 1 |
Urine Absorbing Aids - Vocabulary - Part 1: Conditions of Urinary Incontinence (ISO 9949-1: 1993) (N) |
|
BSI BS 7710 PART 2 |
Urine Absorbing Aids - Vocabulary - Part 2: Products (ISO 9949-2: 1993) (N) |
|
BSI BS 7843 SEC 2.1 |
Guide to the Acquisition and Management of Meteorological Precipitation Data Part 2: Field Practices and Data Management Section 2.1: Technical Aspects in the Field-AMD 9415 March 15, 1997; |
|
BSI BS 7971-3 |
Protective clothing and equipment for use in violent situations and in training Part 3: Personal defence shields Requirements and test methods |
|
BSI BS EN 12173 |
Products used for treatment of water intended for human consumption Sodium fluoride |
|
BSI BS EN 12286 |
1999 In Vitro Diagnostic Medical Devices - Measurement of Quantities in Samples of Biological Origin - Presentation of Reference Measurement Procedures-AMD 11034: January 2001; |
|
BSI BS EN 12673 |
Water Quality - Gas Chromatographic Determination of Some Selected Chlorophenols in Water-Also Known as BS 6068-2.65:1999 |
|
BSI BS EN 12791 |
Chemical disinfectants and antiseptics Surgical hand disinfection Test method and requirement (phase 2/step 2) |
|
BSI BS EN 12881-1 |
Conveyor belts Fire simulation flammability testing Part 1: Propane burner tests-Supersedes BS 490-11.2: 1991 |
|
BSI BS EN 12881-2 |
Conveyor belts Fire simulation flammability testing Part 2: Large scale fire test |
|
BSI BS EN 13167 |
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification-AMD 15213: June 30, 2004; CORR 16189: March, 2006 |
|
BSI BS EN 13205 |
Workplace Atmospheres - Assessment of Performance of Instruments for Measurement of Airborne Particle Concentrations |
|
BSI BS EN 13484 |
Helmets for Users of Luges |
|
BSI BS EN 13870 |
Food processing machinery Chop cutting machines Safety and hygiene requirements |
|
BSI BS EN 13890 |
Workplace atmospheres Procedures for measuring metals and metalloids in airborne particles Requirements and test methods |
|
BSI BS EN 13946 |
Water quality Guidance standard for the routine sampling and pretreatment of benthic diatoms from rivers-Also Known AS BS 6068-5.33: 2003; |
|
BSI BS EN 14011 |
Water quality - Sampling of fish with electricity |
|
BSI BS EN 14255-2 |
Measurement and assessment of personal exposures to incoherent optical radiation Part 2: Visible and infrared radiation emitted by artificial sources in the workplace |
|
BSI BS EN 14328 |
Protective clothing Gloves and armguards protecting against cuts by powered knives Requirements and test methods |
|
BSI BS EN 14346 |
Characterization of waste - Calculation of dry matter by determination of dry residue or water content |
|
BSI BS EN 14375 |
Child-resistant non-reclosable packaging for pharmaceutical products Requirements and testing-CORR 16342: June 2006 |
|
BSI BS EN 14583 |
Workplace atmospheres Volumetric bioaerosol sampling devices Requirements and test methods |
|
BSI BS EN 14662-2 |
Ambient air quality Standard method for measurement of benzene concentrations Part 2 : Pumped sampling followed by solvent desorption and gas chromatography |
|
BSI BS EN 14996 |
Water quality Guidance on assuring the quality of biological and ecological assessments in the aquatic environment-Also Known As BS 6068-5.42: 2006 |
|
BSI BS EN 1644-1 |
Test Methods for Nonwoven Compresses for Medical Use Part 1: Nonwovens Used in the Manufacture of Compresses |
|
BSI BS EN 21942-1 |
Dental Vocabulary Part 1: General and Clinical Terms (ISO 1942-1: 1989) |
|
BSI BS EN 21942-2 |
Dental Vocabulary Part 2: Dental Materials (ISO 1942-2: 1989) (N) |
|
BSI BS EN 25264-3 |
Pulps - Laboratory Beating Part 3: Jokro Mill Method (ISO 5264-3: 1979) (N) |
|
BSI BS EN 282 |
Avalanche Beacons - Transmitter/Receiver Systems - Safety Requirements and Testing |
|
BSI BS EN 50072 |
Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.29: Specification for Peritoneal Dialysis Equipment-Superseded by BS EN 60601-2-39: 1999 |
|
BSI BS EN 510 |
Protective Clothing for Use Where There is a Risk of Entanglement with Moving Parts (N) |
|
BSI BS EN 60731 |
Medical Electrical Equipment - Dosimeters with Ionization Chambers as Used in Radiotherapy-AMD 14464: October 27, 2003; IEC 60731:1997; |