|
BSI BS EN 60761-5 |
Equipment for continuous monitoring radioactivity in gaseous effluents Part 5: Specific requirements for tritium monitors-AMD 15423: March 10, 2005; Renumbers BS IEC 60761-5:2002 |
|
BSI BS EN 61303 |
Medical Electrical Equipment - Radionuclide Calibrators - Particular Methods for Describing Performance-IEC 1303: 1994; |
|
BSI BS EN 61582 |
Radiation protection instrumentation In vivo counters Classification, general requirements and test procedures for portable, transportable and installed equipment |
|
BSI BS EN 61669 |
Electroacoustics - Equipment for the Measurement of Real-Ear Acoustical Characteristics of Hearing Aids |
|
BSI BS EN 61675-2 |
Radionuclide Imaging Devices - Characteristics and Test Conditions - Part 2: Single Photon Emission Computer Tomographs-AMD 15583: May 6, 2005; IEC 61675-2: 1998 |
|
BSI BS EN 885 |
Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide silicate |
|
BSI BS EN 889 |
Chemicals used for treatment of water intended for human consumption Iron (II) sulfate |
|
BSI BS EN 891 |
Chemicals used for treatment of water intended for human consumption Iron (III) chloride sulfate |
|
BSI BS EN ISO 10271 |
Dental Metallic Materials - Corrosion Test Methods-CORR 13648: January 23, 2002; Supersedes PD 6583:1993; |
|
BSI BS EN ISO 10322-1 |
Ophthalmic Optics - Semi-Finished Spectacle Lens Blanks - Part 1: Specifications for Single-Vision and Multifocal Lens Blanks |
|
BSI BS EN ISO 10322-2 |
Ophthalmic Optics - Semi-Finished Spectacle Lens Blanks - Part 2: Specifications for Progressive Power Lens Blanks |
|
BSI BS EN ISO 10342 |
Ophthalmic Instruments - Eye Refractometers-CORR 14782: October 21, 2003; |
|
BSI BS EN ISO 10343 |
Ophthalmic Instruments - Ophthalmometers-AMD 10608: September 1999; Renumbers BS ISO 10343: 1997 |
|
BSI BS EN ISO 10942 |
Ophthalmic Instruments - Direct Ophthalmoscopes |
|
BSI BS EN ISO 11143 |
Dental Equipment - Amalgam Separators |
|
BSI BS EN ISO 11499 |
Dental Cartridges for Local Anaesthetics-AMD 10696: September 1999; Renumbers BS ISO 11499: 1999 |
|
BSI BS EN ISO 13897 |
Dentistry Amalgam capsules |
|
BSI BS EN ISO 14233 |
Dentistry Polymer-based die materials-CORR 14635: August 5, 2003; |
|
BSI BS EN ISO 14356 |
Dentistry Duplicating material-CORR 14634: August 6, 2003; |
|
BSI BS EN ISO 15087-5 |
Dental Elevators - Part 5: Bein Elevators |
|
BSI BS EN ISO 16408 |
Dentistry Oral hygiene products Oral rinses-ISO 16408:2004 |
|
BSI BS EN ISO 16744 |
Dentistry Base metal materials for fixed dental restorations-CORR 15060: March 17, 2004 |
|
BSI BS EN ISO 18153 |
In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials |
|
BSI BS EN ISO 20079 |
Water quality - Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) - Duckweed growth inhibition test-AMD 17054: March 30, 2007 |
|
BSI BS EN ISO 21649 |
Needle-free injectors for medical use Requirements and test methods |
|
BSI BS EN ISO 3630-3 |
Dental Root-Canal Instruments Part 3: Condensers, Pluggers and Spreaders |
|
BSI BS EN ISO 6871-1 |
Dental Base Metal Casting Alloys Part 1: Cobalt-Based Alloys-Supersedes BS 3366: Part 1: 1988 and Part 2: 1976; |
|
BSI BS EN ISO 6871-2 |
Dental Base Metal Casting Alloys Part 2: Nickel-Based Alloys-Supersedes BS 3366: Part 1: 1988 and Part 2: 1976; |
|
BSI BS EN ISO 6874 |
Dentistry Polymer-based pit and fissure sealants-Supersedes BS EN 26874: 1992 |
|
BSI BS EN ISO 7491 |
Dental Materials - Determination of Colour Stability-Supersedes BS 6790 |
|
BSI BS EN ISO 7899-1 |
Water Quality - Detection and Enumeration of Intestinal Enterococci - Part 1: Miniaturized Method (Most Probable Number) for Surface and Waste Water-CORR 13020:June 2001; Supersedes BS 6068-4.3: 1989; Also Known as BS 6068-4.3: 1999 |
|
BSI BS EN ISO 7899-2 |
Water Quality - Detection and Enumeration of Intestinal Enterococci - Part 2: Membrane Filtration Method-Also Known as BS 6068-4.4: 2000; Supersedes BS 6068-4.4: 1989; |
|
BSI BS EN ISO 8669-2 |
Urine Collection Bags Part 2: Requirements and Test Methods |
|
BSI BS EN ISO 8670-2 |
Ostomy Collection Bags - Part 2: Requirements and Test Methods-Supersedes BS 7127: Part 101: 1992; |
|
BSI BS EN ISO 8847 |
Small craft Steering gear Cable and pulley systems-CORR 16060: August 2006; Supersedes BS 7163:1990 |
|
BSI BS EN ISO 9187-1 |
Injection equipment for medical use Part 1: Ampoules for injectables |
|
BSI BS EN ISO 9187-2 |
Injection Equipment for Medical Use - Part 2: One-Point-Cut (OPC) Ampoules-CORR 10826; April 2000; |
|
BSI BS EN ISO 9391 |
Water Quality Sampling in Deep Waters for Macro-Invertebrates - Guidance on the Use of Colonization, Qualitative and Quantitative Samplers-Also Known as BS 6068-5.15:1995 |
|
BSI BS ISO 10542-1 |
Technical Systems and Aids for Disabled or Handicapped Persons - Wheelchair Tiedown and Occupant-Restraint Systems - Part 1: Requirements and Test Methods for All Systems |
|
BSI BS ISO 10542-5 |
Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 5: Systems for specific wheelchairs |
|
BSI BS ISO 11418-1 |
Containers and accessories for pharmaceutical preparations Part 1: Drop-dispensing glass bottles |
|
BSI BS ISO 13405-3 |
Prosthetics and Orthotics - Classification and Description of Prosthetic Components Part 3: Description of Upper-Limb Prosthetic Components |
|
BSI BS ISO 14243-3 |
Implants for surgery Wear of total knee-joint prostheses Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test |
|
BSI BS ISO 15142-2 |
Implants for surgery Metal intramedullary nailing systems Part 2: Locking components-BS ISO 15142-1: 2003 and BS ISO 15142-3: 2003 supersedes BS 3531-14.1: 1990; |
|
BSI BS ISO 19238 |
Radiation protection Performance criteria for service laboratories performing biological dosimetry by cytogenetics |
|
BSI BS ISO 22048 |
Surface chemical analysis Information format for static secondary-ion mass spectrometry |
|
BSI BS ISO 7176-6 |
Wheelchairs - Part 6: Determination of Maximum Speed, Acceleration and Deceleration of Electric Wheelchairs |
|
BSI BS ISO 8548-4 |
Prosthetics and Orthotics - Limb Deficiencies - Part 4: Description of Casual Conditions Leading to Amputation |
|
BSI BS ISO 8835-2 |
Inhalational Anaesthesia Systems - Part 2: Anaesthetic Breathing Systems for Adults-Supersedes BS 7734: 1994; |
|
BSI DD 256 |
Assessment of the Potential for Metallic Materials to Affect Adversely the Quality of Water Intended for Human Consumption - Specification-Revision of BS 7766:1994; |
|
BSI DD CEN/TS 14997 |
Characterization of waste Leaching behaviour tests Influence of pH on leaching with continuous pH-control |
|
BSI DD CEN/TS 15279 |
Workplace exposure Measurement of dermal exposure Principles and methods |
|
BSI DD ENV 12537-1 |
Medical Informatics - Registration of Information Objects Used for EDI in Healthcare - Part 1: The Register |
|
BSI DD ENV 60695-2-4/2 |
Fire Hazard Testing Part 2: Test Methods Section 4/Sheet 2: 500 W Nominal Test Flames and Guidance (IEC 695-2-4/2: 1994) (N) |
|
BSI DD ISO/TS 16628 |
Tracheobronchial tubes Recommendations for size designation and labelling |
|
BSI DD ISO/TS 4869-5 |
Acoustics Hearing protectors Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects-ISO/TS 4869-5:2006 |
|
BSI PAS 59 |
Filled collective fall arrest systems-AMD 15221:August 20, 2004 |
|
BSI PD 13846 |
Recommendations to Preserve and Extend Sludge Utilization and Disposal Routes-CORR 10986; June 2000; CR 13846: 2000; |
|
BSI PD 6545 |
Intended use of human head and ear simulators Guide |
|
BSI PD IEC/TR 61948-1 |
Nuclear Medicine Instrumentation - Routine Tests - Part 1: Radiation Counting Systems-IEC/TR 61948-1:2001; |
|
BSI PD ISO/TR 17737 |
Workplace air - Guidelines for selecting analytical methods for sampling and analysing isocyanates in air |
|
BSI BS 1679-6 |
Containers for Pharmaceutical Dispensing Part 6: Specification for Glass Medicine Bottles (N) |
|
BSI BS 1715-2.11 |
Analysis of Soaps Part 2: Quantitative Test Methods Section 2.11: Method for Determination of Ethanol-Insoluble Matter Content (ISO 673-1981) |
|
BSI BS 1715-2.2 |
Analysis of Soaps Part 2: Quantitative Test Methods Section 2.2: Method for Determination of Total Free Alkali Content (ISO 684-1974) |
|
BSI BS 2838 PART 1 |
Examination and General Treatment Couches Part 1: Specification for Fixed Height Couches |
|
BSI BS 2982 |
Materials and Packaging of Surgical Scalpels with Detachable Blades (AMD 8300) February 15, 1995 (N)-Amd 1; |
|
BSI BS 3221 PART 1 |
Medicine Measures Part 1: Specification for Medicine Measures of 50 mL Total Graduated Capacity (AMD 5368) August 29, 1986-Amd 1; |
|
BSI BS 3348 |
Antral Trocars and Cannulae |
|
BSI BS 3487-4 |
Tracheal Tubes Part 4: Specification for Tubes of the Cole Type-ISO 5361-4:1987; |
|
BSI BS 3520 |
Dental Wrought Precious Metal Alloy Wire |
|
BSI BS 3619 |
Mobile Infusion Stands-Amd 1; |
|
BSI BS 4009 |
Artificial mastoids for the calibration of bone vibrators used in hearing aids and audiometers |
|
BSI BS 4222 |
Dimensions of the Transmission Coupling (Slip-Joint) to Dental Handpieces |
|
BSI BS 4272 PART 1 |
Anaesthetic and Analgesic Machines Part 1: Anaesthetic Machines of the On-Demand Type Supplied with Nitrous Oxide and Oxygen from Separate Containers |
|
BSI BS 4316 |
Apparatus for Measurement of Packed Red Cell Volume-Amd 1; |
|
BSI BS 4669 |
An Artificial Ear of the Wide Band Type for the Calibration of Earphones Used in Audiometry-Replaced by BS EN 60318-1:1998 but remains current |
|
BSI BS 5724 SEC 2.29: |
Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.29: Specification for Peritoneal Dialysis Equipment |
|
BSI BS 6058 |
Specifying and Verifying the Characteristics of Rotating Anode X-Ray Tubes and X-Ray Tube Assemblies Used in Medical Diagnosis-AMD 6761: September 1991; EN 60613:1990; IEC 613:1989; |
|
BSI BS 6068 SEC 5.17 |
Water Quality Part 5: Biological Methods Section 5.17: Determination of the Prolonged Toxicity of Substances to Freshwater Fish - Method for Evaluating the Effects of Substances on the Growth Rate of Rainbow Trout (Oncorhynchus Mykiss Walbaum (Teleostei, Salminidae))-ISO 10229: 1994; |
|
BSI BS 6083 PART 5 |
Hearing Aids Part 5: Specifications for Dimensions of the Nipple and Sealing Device for Insert Earphones (AMD 6182) October 31, 1990-Amd 1; |
|
BSI BS 6747 |
Orthodontic Resins (AMD 6663) April 30 1991-Amd 1; |
|
BSI BS 7143 |
Catheter Mounts (Flexible Adaptors) for Use with Medical Breathing Systems-AMD 13226: November 12, 2001; |
|
BSI BS 7252 PART 10 |
Metallic Materials for Surgical Implants Part 10: Specification for Wrought Titanium 5-Aluminium 2,5-Iron Alloy-ISO 5832-10: 1996; |
|
BSI BS 7252 PART 7 |
Metallic Materials for Surgical Implants Part 7: Specification for Cobalt-Chromium- Nickel-Molybdenum-Iron Alloy (ISO 5832-7: 1994) (N) |
|
BSI BS 7313 PART 4 |
Prosthetics and Orthotics Part 4: Method of Describing Upper Limb Amputation Stumps (ISO 8548-3: 1993) (N) |
|
BSI BS 7582 |
Code of practice for reconditioning of used safes |
|
BSI BS 7710 PART 3 |
Urine Absorbing Aids - Vocabulary - Part 3: Identification of Product Types (ISO 9949-3: 1993) (N) |
|
BSI BS 7843 SEC 1.2 |
Guide to the Acquisition and Management of Meteorological Precipitation Data Part 1: Network Design Section 1.2: Network Design and Monitoring (N) |
|
BSI BS 7843-3.1 |
Acquisition and Management of Meteorological Precipitation Data - Part 3: Specification for Raingauges - Section 3.1: Storage Rainguages |
|
BSI BS 7967-4 |
Carbon monoxide in dwellings and the combustion performance of gas-fired appliances - Part 4: Guide for using electronic portable combustion gas analysers as part of the process of servicing and maintenance of gas-fired appliances |
|
BSI BS 7971-11 |
Protective clothing and equipment for use in violent situations and in training - Part 11: Foot and ankle protectors and foot protectors - Requirements and test methods |
|
BSI BS 7971-4 |
Protective clothing and equipment for use in violent situations and in training Part 4: Limb protectors Requirements and test methods |
|
BSI BS EN 1202 |
Chemicals used for treatment of water intended for human consumption Dipotassium hydrogen orthophosphate |
|
BSI BS EN 12181 |
Oropharyngeal Airways-Supersedes BS 6153:1987; |
|
BSI BS EN 12287 |
In Vitro Diagnostic Medical Devices - Measurement of Quantities in Samples of Biological Origin - Description of Reference Materials |
|
BSI BS EN 12457-1 |
Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 1/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
|
BSI BS EN 12918 |
Water Quality - Determination of Parathion, Parathion-Methyl and Some Other Organophosphorus Compounds in Water by Dichloromethane Extraction and Gas Chromatographic Analysis-Also Known as BS 6068-2.67:1999 |
|
BSI BS EN 13342 |
Characterization of Sludges - Determination of Kjeldahl Nitrogen |
|
BSI BS EN 13370 |
Characterization of waste Analysis of eluates Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN-,F--Supersedes DD ENV 13370: 2001; |
|
BSI BS EN 13606-4 |
Health informatics - Electronic health record communication - Part 4: Security |
|
BSI BS EN 14128 |
Durability of wood and wood-based products Performance criteria for curative wood preservatives as determined by biological tests |
|
BSI BS EN 1421 |
Chemicals Used for Treatment of Water Intended for Human Consuption - Ammonium Chloride |
|
BSI BS EN 14211 |
Ambient air quality - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
|
BSI BS EN 14253 |
Mechanical vibration Measurement and calculation of occupational exposure to whole-body vibration with reference to health Practical guidance |
|
BSI BS EN 14454 |
Devices to prevent pollution by backflow of potable water Hose union backflow preventer DN 15 to DN 32 Family H, type A |
|
BSI BS EN 14486 |
Water quality Detection of human enteroviruses by monolayer plaque assay |
|
BSI BS EN 14530 |
Workplace atmospheres Determination of diesel particulate matter General requirements |
|
BSI BS EN 14561 |
Chemical disinfectants and antiseptics Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area Test method and requirements (phase 2, step 2) |
|
BSI BS EN 14662-1 |
Ambient air quality Standard method for measurement of benzene concentrations Part 1 : Pumped sampling followed by thermal desorption and gas chromatography |
|
BSI BS EN 14662-4 |
Ambient air quality Standard method for measurement of benzene concentrations Part 4: Diffusive sampling followed by thermal desorption and gas chromatography |
|
BSI BS EN 14662-5 |
Ambient air quality Standard method for measurement of benzene concentrations Part 5: Diffusive sampling followed by solvent desorption and gas chromatography |
|
BSI BS EN 14671 |
Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride |
|
BSI BS EN 14735 |
Characterization of waste Preparation of waste samples for ecotoxicity tests |
|
BSI BS EN 14954 |
Surfaces for sports areas Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas |
|
BSI BS EN 14962 |
Water quality Guidance on the scope and selection of fish sampling methods-Also Known As BS 6068-5.40: 2006 |
|
BSI BS EN 15424 |
Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices |
|
BSI BS EN 1658 |
Requirements for Marking of In Vitro Diagnostic Instruments |
|
BSI BS EN 1733 |
Suction catheters for use in the respiratory tract |
|
BSI BS EN 1911-3 |
Stationary Source Emissions - Manual Method of Determination of HCI - Part 3: Absorption Solutions Analysis and Calculation |
|
BSI BS EN 569 |
Mountaineering Equipment - Pitons - Safety Requirements and Test Methods |
|
BSI BS EN 60761-2 |
Equipment for continuous monitoring radioactivity in gaseous effluents Part 2: Specific requirements for aerosol monitors including transuranic aerosols-AMD 15426:March 10, 2005; Renumbers BS IEC 60761-2:2002 |
|
BSI BS EN 60761-4 |
Equipment for continuous monitoring radioactivity in gaseous effluents Part 4: Specific requirements for iodine monitors-AMD 15424:February 3, 2005; Renumbers BS IEC 60761-4:2002 |
|
BSI BS EN 60984 |
Specification for Sleeves of Insulating Material for Live Working-AMD 9891: April 1998; AMD 13831: November 20, 2002 |
|
BSI BS EN 61168 |
Medical Electrical Equipment Part 3: Particular Requirements for Performance Section 3.129: Methods of Declaring Functional Performance Characteristics of Radiotherapy Simulators-Also Known as BS 5724 Section 3.129:1994; IEC 1168: 1993 |
|
BSI BS EN 61266 |
Ultrasonics Hand-Held Probe Doppler Foetal Heartbeat Detectors Performance Requirements and Methods of Measurement and Reporting (IEC 1266: 1994) (N) |
|
BSI BS EN 61331-1 |
Protective devices against diagnostic medical X-radiation Part 1: Method for determination of attenuation properties of sheet materials-AMD 13968: November 25, 2002; Renumbers BS 7817-1: 1995; |
|
BSI BS EN 61391-1 |
Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response |
|
BSI BS EN 61674 |
Medical Electrical Equipment - Dosimeters with Ionization Chambers and/or Semi-Conductor Detectors as Used in X-Ray Diagnosis Imaging-AMD 14463: August 5, 2003; IEC 61674: 1997; |
|
BSI BS EN 61953 |
Diagnostic X-Ray Imaging Equipment - Characteristics of Mammographic Anti-Scatter Grids-IEC 61953: 1997; |
|
BSI BS EN 886 |
Chemicals used for treatment of water intended for human consumption - Polyaluminium hydroxide silicate sulfate |
|
BSI BS EN ISO 10139-1 |
Dentistry Soft lining materials for removable dentures Part 1: Materials for short-term use-Supersedes BS EN 30139-1: 1994 |
|
BSI BS EN ISO 10451 |
Dental Implant Systems - Contents of Technical File-CORR 13910: May 15, 2002; |
|
BSI BS EN ISO 11369 |
Water Quality - Determination of Selected Plant Treatment Agents - Method Using High Performance Liquid Chromatography with UV Detection After Solid-Liquid Extraction-Also Known as BS 6068-2.61: 1997 |
|
BSI BS EN ISO 13295 |
Dental Rotary Instruments - Mandrels-AMD 9649: 11/1997; Also Numbered as BS ISO 13295: 1994 |
|
BSI BS EN ISO 13397-3 |
Periodontal Curettes, Dental Scalers and Excavators Part 3: Dental Scalers - H-Type |
|
BSI BS EN ISO 13397-4 |
Periodontal Curettes, Dental Scalers and Excavators Part 4: Dental Excavators - Discard Type |
|
BSI BS EN ISO 15087-2 |
Dental Elevators - Part 2: Warwick James Elevators |
|
BSI BS EN ISO 15087-3 |
Dental Elevators - Part 3: Cryer Elevators |
|
BSI BS EN ISO 15606 |
Dental Handpieces - Air-Powered Scalers and Scaler Tips |
|
BSI BS EN ISO 15681-2 |
Water quality Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Part 2: Method by continuous flow analysis (CFA)-CORR 15003:February 18, 2004; AMD 15546:February 28, 2005; CORR 15625:March 8, 2005; Renumbers BS ISO 15681-2:2003; Also known as BS 6068-2.87:2004 |
|
BSI BS EN ISO 15839 |
Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests-Amd 16752: November 30, 2006 |
|
BSI BS EN ISO 15854 |
Dentistry Casting and baseplate waxes-Supersedes BS EN ISO 12163: 2000 and BS EN ISO 1561: 1998 |
|
BSI BS EN ISO 16021 |
Urine-Absorbing Aids - Basic Principles for Evaluation of Single-Use Adult-Incontinence-Absorbing Aids from the Perspective of Users and Caregivers |
|
BSI BS EN ISO 16201 |
Technical aids for disabled persons Environmental control systems for daily living |
|
BSI BS EN ISO 18857-1 |
Water quality Determination of selected alkylphenols Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection-Renumbers BS ISO 18857-1:2005; AMD 16672: October 31, 2006 |
|
BSI BS EN ISO 1924-2 |
Paper and Board - Determination of Tensile Properties Part 2: Constant Rate of Elongation Method (N) |
|
BSI BS EN ISO 1942-5 |
Dental Vocabulary Part 5: Terms Associated with Testing (N) |
|
BSI BS EN ISO 22478 |
Water quality Determination of certain explosives and related compounds .. Method using .. high-performance liquid chromatography (HPLC) with UV detection |
|
BSI BS EN ISO 22868 |
Forestry machinery Noise test code for portable hand-held machines with internal combustion engine Engineering method (Grade 2 accuracy) |
|
BSI BS EN ISO 3630-1 |
Dental Root-Canal Instruments Part 1: Files, Reamers, Barbed Broaches, Rasps, Paste Carriers, Explorers and Cotton Broaches (AMD 8632) May 15, 1995 (Formerly Replaces BS 6815: Part 1: 1993, Replaces BS 6815: 1987 and BS 6815-1: 1993) (N)-Amd 1; |
|
BSI BS EN ISO 4073 |
Dental equipment Items of dental equipment at the working place Identification system |
|
BSI BS EN ISO 6529 |
Protective Clothing - Protection Against Chemicals - Determination of Protective Clothing Materials to Permeation by Liquids and Gases-ISO 6529:2001; Supersedes BS EN 369:1993; |
|
BSI BS EN ISO 6876 |
Dental root canal sealing materials-CORR 14333: February 5, 2003; Supersedes BS 6934: 1988; |
|
BSI BS EN ISO 7492 |
Dental Explorers-AMD 10134: 9/1998; Renumbers BS ISO 7492: 1997; Partly Supersedes BS 2965: 1970 |
|
BSI BS EN ISO 7493 |
Dental Operator's Stool |
|
BSI BS EN ISO 7494-1 |
Dentistry Dental units Part 1: General requirements and test methods-Supersedes BS EN ISO 7494:1998 |
|
BSI BS EN ISO 7494-2 |
Dentistry Dental units Part 2: Water and air supply-CORR 14575: July 14, 2003; |
|
BSI BS EN ISO 7551 |
Dental Absorbent Points-AMD 10135: 9/1998; Renumbers BS ISO 7551: 1997 |
|
BSI BS EN ISO 7785-1 |
Dental Handpieces - Part 1: High-Speed Air Turbine Handpieces-Supersedes BS EN 27785-1: 1994; ISO 7785-1: 1997; |
|
BSI BS EN ISO 7785-2 |
Dental Handpieces Part 2: Straight and Geared Angle Handpieces-Supersedes BS EN 27785-2: 1994; |
|
BSI BS EN ISO 8689-2 |
Water Quality - Biological Classification of Rivers - Part 2: Guidance on the Presentation of Biological Quality Data from Surveys of Benthic Macroinvertebrates-Also Known as BS 6068-5.27:2000 |
|
BSI BS EN ISO 8692 |
Water quality Freshwater algal growth inhibition test with unicellular green algae-Supersedes BS EN 28692:1993; BS 6068-5.10:2004 |
|
BSI BS EN ISO 8871-2 |
Elastomeric parts for parenterals and for devices for pharmaceutical use Part 2: Identification and characterization-Together with BS EN ISO 8871-1 and -3, Partially supersedes BS EN ISO 8871:1997 |
|
BSI BS EN ISO 8872 |
Aluminium caps for transfusion, infusion and injection bottles General requirements and test methods-CORR 14519: June 11, 2003; Supersedes BS EN 28872:1993; |
|
BSI BS EN ISO 8980-5 |
Ophthalmic optics Uncut finished spectacle lenses Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant |
|
BSI BS EN ISO 9333 |
Dentistry - Brazing materials |
|
BSI BS EN ISO 9693 |
Metal-Ceramic Dental Restorative Systems |
|
BSI BS EN ISO 9917-2 |
Dental Water-Based Cements - Part 2: Light-Activated Cements |
|
BSI BS ISO 10390 |
Soil quality Determination of pH-Supersedes BS 7755-3.2:1995 |
|
BSI BS ISO 10542-3 |
Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 3: Docking-type tiedown systems |
|
BSI BS ISO 10542-4 |
Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 4: Clamp-type tiedown systems |
|
BSI BS ISO 10705-3 |
Water quality Detection and enumeration of bacteriophages Part 3: Validation of methods for concentration of bacteriophages from water-Also Known as BS 6068-4.16:2003; |
|
BSI BS ISO 10936-1 |
Optics and Optical Instruments - Operation Microscopes - Part 1: Requirements and Test Methods |
|
BSI BS ISO 10936-2 |
Optics and Optical Instruments - Operation Microscopes - Part 2: Light Hazard from Operation Microscopes Used in Ocular Surgery |
|
BSI BS ISO 11599 |
Determination of Gas Porosity and Gas Permeability of Hydraulic Binders Containing Embedded Radioactive Waste |
|
BSI BS ISO 11933-3 |
Components for Containment Enclosures - Part 3: Transfer Systems Such as Plain Doors, Airlock Chambers, Double Door Transfer Systems, Leaktight Connections for Waste Drums |
|
BSI BS ISO 13405-1 |
Prosthetics and Orthotics - Classification and Description of Prosthetic Components Part 1. Classification of Prosthetic Components |
|
BSI BS ISO 14152 |
Neutron radiation protection shielding Design principles and considerations for the choice of appropriate materials |
|
BSI BS ISO 14242-1 |
Implants for Surgery - Wear of Total Hip-Joint Prostheses - Part 1: Loading and Displacement Parameters for Wear-Testing Machines and Corresponding Environmental Conditions for Test |
|
BSI BS ISO 14242-2 |
Implants for Surgery - Wear of Total Hip Joint Prostheses - Part 2: Methods of Measurement |
|
BSI BS ISO 14835-1 |
Mechanical vibration and shock Cold provocation tests for the assessment of peripheral vascular function Part 1: Measurement and evaluation of finger skin temperature |
|
BSI BS ISO 14835-2 |
Mechanical vibration and shock Cold provocation tests for the assessment of peripheral vascular function Part 2: Measurement and evaluation of finger systolic blood pressure |
|
BSI BS ISO 15010 |
Disposable Hanging Devices for Transfusion and Infusion Bottles - Requirements and Test Methods |
|
BSI BS ISO 15176 |
Soil quality - Characterization of excavated soil and other soil materials intended for re-use |
|
BSI BS ISO 15674 |
Cardiovascular Implants and Artificial Organs - Hard-Shell Cardiotomy/Venous Reservoir Systems (with/without Filter) and Soft Venous Reservoir Bags |
|
BSI BS ISO 20552 |
Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry |
|
BSI BS ISO 28077 |
Photocarcinogenesis action spectrum (non-melanoma skin cancers) |
|
BSI BS ISO 5832-2 |
Implants for Surgery - Metallic Materials - Part 2: Unalloyed Titanium-Supersedes BS 7252-2:1994 |
|
BSI BS ISO 7176-15 |
Wheelchairs Part 15: Requirements for Information Disclosure, Documentation and Labelling |
|
BSI BS ISO 7176-22 |
Wheelchairs - Part 22: Set-up Procedures |
|
BSI BS ISO 7176-9 |
Wheelchairs - Part 9: Climatic Tests for Electric Wheelchairs |
|
BSI BS ISO 7206-10 |
Implants for surgery Partial and total hip-joint prostheses Part 10: Determination of resistance to static load of modular femoral heads |
|
BSI BS ISO 8009-10 |
Reusable Rubber Contraceptive Diaphragms Part 10: Recommendations for Storage-Together with BS ISO 8009: Parts 1 to 9, it Supersedes BS 4028: 1989; |
|
BSI BS ISO 8009-5 |
Reusable Rubber Contraceptive Diaphragms Part 5: Determination of Tensile Properties-Together with BS ISO 8009: Parts 1 to 4, and Parts 6 to 10, it Supersedes BS 4028: 1989; |
|
BSI BS ISO 8548-5 |
Prosthetics and orthotics Limb deficiencies Part 5: Description of the clinical condition of the person who has had an amputation |
|
BSI BS ISO 9802 |
Raw Optical Glass - Vocabulary-CORR 15953: August 2006 |
|
BSI DD CLC/TS 50418 |
Safety of machinery Electro-sensitive protective equipment Passive infra-red protective devices (PIPDs) |
|
BSI PAS 61 |
Determination of priority pollutants in surface water using passive sampling-First Edition |
|
BSI PD 6589 |
Method for Defining Profiles for Healthcare (CR 12161: 1995) (N) |
|
BSI PD CEN/TR 15310-1 |
Characterization of waste Sampling of waste materials Part 1: Guidance on selection and application of criteria for sampling under various conditions |
|
BSI PD CEN/TR 15419 |
Protective clothing Guidelines for selection, use, care and maintenance of chemical protective clothing |
|
BSI PD CR 13714 |
Characterisation of sludges Sludge management in relation to use or disposal |