|
BSI BS 6756 |
Fibre Rope Cargo Nets |
|
BSI BS 6956 PART 5 |
Jointing Materials and Compounds Part 5: Specification for Jointing Compounds for Use with Water, Low Pressure Saturated Steam, 1st Family Gases (Excluding Coal Gas) and 2nd Family Gases (AMD 8090) April 15, 1994 (Q)-Amd 1; |
|
BSI BS 7027 |
Limits and Methods of Measurement of the Immunity of Marine Electrical and Electronic Equipment to Conducted and Radiated Electromagnetic Interference |
|
BSI BS 7888-4.2 |
Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV Part 2: Cables with impregnated paper insulation-HD 629.2 S2:2006 |
|
BSI BS 7981 |
Code of Practice for the Installation, Maintenance, Thorough Examination and Safe Use of Mast Climbing Work Platforms (MCWPs) |
|
BSI BS EN 10301 |
Steel tubes and fittings for on and offshore pipelines Internal coating for the reduction of friction for conveyance of non corrosive gas |
|
BSI BS EN 12326-1 |
Slate and stone products for discontinuous roofing and cladding Part 1: Product specification-Supersedes BS 680-2:1971 |
|
BSI BS EN 13109 |
LPG tanks Disposal |
|
BSI BS EN 13322-1 |
Transportable gas cylinders Refillable welded steel gas cylinders Design and construction Part 1: Carbon steel-AMD 16352:July 2006; Partially supersedes BS 5045-2:1989 |
|
BSI BS EN 14227-12 |
Hydraulically bound mixtures Specifications Part 12: Soil treated by slag |
|
BSI BS EN 1440 |
LPG equipment and accessories Transportable refillable welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders Periodic inspection |
|
BSI BS EN 14596 |
Tanks for transport of dangerous goods Service equipment for tanks Emergency pressure relief valve |
|
BSI BS EN 1918-2 |
Gas Supply Systems - Underground Gas Storage - Part 2: Functional Recommendations for Storage in Oil and Gas Fields |
|
BSI BS EN 1926 |
Natural stone test methods Determination of uniaxial compressive strength |
|
BSI BS EN 50152-1 |
Railway Applications - Fixed Installations - Particular Requirements for a.c. Switchgear - Part 1: Single-Phase Circuit-Breakers with Um Above 1kV |
|
BSI BS EN 50215 |
Railway Applications - Testing of Rolling Stock After Completion of Construction and Before Entry into Service |
|
BSI BS EN 61069-7 |
Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment Part 7: Assessment of System Safety-IEC 61069-7: 1999; |
|
BSI BS EN 61823 |
Electrical installations for lighting and beaconing of aerodromes AGL series transformers |
|
BSI BS EN ISO 14509-2 |
Small craft Airborne sound emitted by powered recreational craft Part 2: Sound assessment using reference craft |
|
BSI BS IEC 61839 |
Nuclear Power Plants - Design of Control Rooms - Functional Analysis and Assignment |
|
BSI BS ISO 10056 |
Mechanical Vibration - Measurement and Analysis of Whole-Body Vibration to Which Passengers and Crew Are Exposed in Railway Vehicles |
|
BSI BS ISO 16155 |
Ships and marine technology Computer applications Shipboard loading instruments |
|
BSI BS ISO 4512 |
Petroleum and Liquid Petroleum Products - Equipment for Measurement of Liquid Levels in Storage Tanks - Manual Methods |
|
BSI BS ISO 6953-1 |
Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements-CORR 16971: February 28, 2007 |
|
BSI BS MA 2 PART 1 |
Magnetic Compasses and Binnacles Part 1: Class A Magnetic Compasses, Their Binnacles and Azimuth Reading Devices (Including Test Procedures) |
|
BSI BS 3680 PART 2D |
Measurement of Liquid Flow in Open Channels Part 2: Dilution Methods Part 2D: Methods of Measurement Using Fluorescent Tracers (ISO 9555-4: 1992) |
|
BSI BS 3680 PART 8B |
Measurement of Liquid Flow in Open Channels: Measuring Instruments and Equipment: Recommendations for Direct Depth Sounding and Suspension Equipment |
|
BSI BS 3951 SEC 1.4 |
Freight Containers Part 1: General Section 1.4: Glossary of Terminology-AMD 7759: July 15, 1993; ISO 830: 1981; |
|
BSI BS 4019-5 |
Rotary Core Drilling Equipment - Specification for Wireline Diamond Drilling Equipment - System A. Metric Units-ISO 10097-1:1999; |
|
BSI BS 4877 |
Recommendations for General Principles of Nuclear Reactor Instrumentation |
|
BSI BS 490 SEC 10.5 |
Conveyor and Elevator Belting Part 10: Testing for Physical Properties Section 10.5: Method for Determination of Tensile Strength and Elongation at Break of Rubber Covers 1: and Partially Replaces BS 490: BS 490: Part 2: 1975) |
|
BSI BS 519 |
Tractive Armature Direct Current Neutral-Polar Line Relays for Railway Signalling-Amd 3; |
|
BSI BS 5500 ENQ CASE 107 |
Enquiry Case Case 107: UT Sensitivity Setting for Sizing and Sentencing of Indications Against Table 5.7(2) (Q) |
|
BSI BS 561 |
Alternating Current Line Relays, Double-Element, 3-Position (for Railway Signalling) (AMD 4018) January, 1961-Amd 1; |
|
BSI BS 5667 PART 10 |
Continuous Mechanical Handling Equipment. Safety Requirements Part 10: Loose Bulk Materials: Vertical Screw Conveyors |
|
BSI BS 5667 PART 2 |
Continuous Mechanical Handling Equipment. Safety Requirements Part 2: Loose Bulk Materials: Pneumatic Handling Installations |
|
BSI BS 5667 PART 5 |
Continuous Mechanical Handling Equipment. Safety Requirements Part 5: Loose Bulk Materials: Couplings and Hose Components Used in Pneumatic Handling |
|
BSI BS 5667 PART 7 |
Continuous Mechanical Handling Equipment. Safety Requirements Part 7: Loose Bulk Materials: Rotary Drum Feeders and Rotary Vane Feeders |
|
BSI BS 5667 PART 9 |
Continuous Mechanical Handling Equipment. Safety Requirements Part 9: Loose Bulk Materials: Bulk Throwing Machines |
|
BSI BS 5777 |
Methods of Test for Verification of Stability of Pallet Stackers and High Lift Platform Trucks |
|
BSI BS 5892-6 |
Railway Rolling Stock Materials - Part 6: Specification for Wheelsets for Traction and Trailing Stock-AMD 10752: March 2000; AMD 16283: March 2006; |
|
BSI BS 6327 |
Fire Protection of Reciprocating Internal Combustion Engines |
|
BSI BS 7076 PART 3 |
Dimensions of Gaskets for Flanges to BS 1560 Part 3: Specification for Non-Metallic Envelope Gaskets |
|
BSI BS 787-2 |
Specification for Mining type flameproof gate-end boxes Part 2: Gate-end boxes with air-break circuit-breakers (for use on 3-phase a.c. circuits up to 650 volts)-AMD 422: February, 1970 |
|
BSI BS 7905-1 |
Lifting Equipment for Performance, Broadcast and Similar Applications - Part 1: Specification for the Design and Manufacture of Above Stage Equipment (Excluding Trusses and Towers) |
|
BSI BS EN 1175-3 |
Safety of Industrial Trucks - Electrical Requirements - Part 3: Specific Requirements for the Electric Power Transmission Systems of Internal Combustion Engine Powered Trucks |
|
BSI BS EN 12065 |
Installations and Equipment for Liquefied Natural Gas - Testing of Foam Concentrates Designed for Generation of Medium and High Expansion Foam and of Extinguishing Powders Used on Liquefied Natural Gas Fires |
|
BSI BS EN 13281 |
Inland Navigation Vessels - Safety Requirements for Walkways and Working Places |
|
BSI BS EN 13322-2 |
Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 2: Stainless steel-AMD 17094: April 30, 2007 |
|
BSI BS EN 13365 |
Transportable gas cylinders Cylinder bundles for permanent and liquefied gases (excluding acetylene) Inspection at time of filling-AMD 16059: December 22, 2005 |
|
BSI BS EN 13953 |
Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)-AMD 17107: May 31, 2007 |
|
BSI BS EN 1398 |
Dock Levellers |
|
BSI BS EN 14585-1 |
Corrugated metal hose assemblies for pressure applications Part 1: Requirements |
|
BSI BS EN 50152-2 |
Railway Applications - Fixed Installations - Particular Requirements for a.c. Switchgear - Part 2: Single-Phase Disconnectors, Earthing Switches and Switches with Um Above 1 kV Circuit-Breakers with Um Above 1kV |
|
BSI BS EN 50264-2 |
Railway applications Railway rolling stock cables having special fire performance Standard wall Part 2: Single core cables |
|
BSI BS EN 60077-3 |
Railway applications Electric equipment for rolling stock Part 3: Electrotechnical components Rules for d.c. circuit-breakers |
|
BSI BS EN 60077-5 |
Railway applications Electrotechnical equipment for rolling stock Part 5: Electrotechnical components Rules for HV fuses |
|
BSI BS EN 60322 |
Railway Applications - Electric Equipment for Rolling Stock - Rules for Power Resistors of Open Construction-IEC 60322: 2001; Supersedes BS 4846: 1972(1990); |
|
BSI BS EN 60953-3 |
Rules for Steam Turbine Thermal Acceptance Tests - Part 3: Thermal Performance Verification Tests of Retrofitted Steam Turbines-IEC 60953-3:2001; |
|
BSI BS EN 61108-1 |
Maritime navigation and radiocommunication equipment and systems Global navigation satellite systems (GNSS) Part 1: Global positioning system (GPS) Receiver equipment Performance standards, methods of testing and required test results |
|
BSI BS EN 61881 |
Railway Applications - Rolling Stock Equipment - Capacitors for Power Electronics-IEC 61881: 1999; |
|
BSI BS EN ISO 252-1 |
Textile Conveyor Belts - Adhesive Strength between Constitutive Elements - Part 1: Methods of Test-Supersedes BS 490-10.4:1983; |
|
BSI BS ISO 10203 |
Iron ores Determination of calcium Flame atomic absorption spectrometric method-: 1993 |
|
BSI BS ISO 11170 |
Hydraulic fluid power Filter elements Sequence of tests for verifying performance characteristics |
|
BSI BS ISO 13689 |
Refigerated Light Hydrocarbon Fluids - Measurement of Liquid Levels in Tanks Containing Liquefied Gases - Microwave-Type Level Gauge |
|
BSI BS ISO 14258 |
Industrial Automation Systems - Concepts and Rules for Enterprise Models |
|
BSI BS ISO 14943 |
Nuclear fuel technology Administrative criteria related to nuclear criticality safety |
|
BSI BS ISO 15371 |
Ships and Marine Technology - Fire-Extinguishing Systems for Protection of Galley Deep-Fat Cooking Equipment Fire Tests |
|
BSI BS ISO 5057 |
Industrial Trucks - Inspection and Repair of Fork Arms in Service on Fork-Lift Trucks-Supersedes BS 5693-5: 1978; |
|
BSI BS ISO 509 |
Implementation of ISO 509:1996 Pallet trucks Principal dimensions |
|
BSI BS ISO 8566-4 |
Cranes - Cabins - Part 4: Jib Cranes |
|
BSI BS 3297 PART 2 |
Characteristics of Indoor and Outdoor Post Insulators for Systems with Nominal Voltages Greater than 1000 V (IEC 273: 1990) (Q) |
|
BSI BS 3680 PART 10E |
Measurement of Liquid Flow in Open Channels Part 10: Sediment Transport: Part 10E: Sampling and Analysis of Gravel Bed Material (ISO 9195: 1992) (Q) |
|
BSI BS 3680 PART 8H |
Measurement of Liquid Flow in Open Channels Part 8: Measuring Instruments and Equipment Part 8H: Method for Specifying the Performance of Hydrometric Equipment (ISO 11655: 1995) (Q) |
|
BSI BS 3810 PART 8 |
Glossary of Terms Used in Materials Handling Part 8: Terms Used in Connection with Lifts, Lifting Platforms and Inclinded Haulage |
|
BSI BS 490 PART 2 |
Conveyor and Elevator Belting Part 2: Rubber and Plastics Belting of Textile Construction for Use on Bucket Elevators |
|
BSI BS 5500 ENQ CASE 87 |
Enquiry Case Case 87: Use of Duplex Steel for the Construction of Pressure Vessels to BS 5500-Issue 4 |
|
BSI BS 5667 PART 6 |
Continuous Mechanical Handling Equipment. Safety Requirements Part 6: Loose Bulk Materials: Rotary Feeders Used in Pneumatic Handling |
|
BSI BS 7202 |
Non-Incendive Low Voltage Control/ Interlock and Low Voltage Earth Fault Monitoring Circuits for Use in Mines |
|
BSI BS EN 1151-1 |
Pumps Rotodynamic pumps Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations Part 1: Non-automatic circulation pumps, requirements, testing, marking-Supersedes BS EN 1151:1999 |
|
BSI BS EN 12007-4 |
Gas Supply Systems - Pipelines for Maximum Operating Pressure up to and Including 16 Bar - Part 4: Specific Functional Recommendations for Renovation |
|
BSI BS EN 12454 |
Founding - Visual Examination of Surface Discontinuities - Steel Sand Castings |
|
BSI BS EN 12680-2 |
Founding Ultrasonic examination Part 2: Steel castings for highly stressed components |
|
BSI BS EN 13096 |
Transportable gas cylinders - Conditions for filling gases into receptacles - Single component gases-CORR 17034: April 30, 2007 |
|
BSI BS EN 13099 |
Transportable gas cylinders Conditions for filling gas mixtures into receptacles-Partially Supersedes BS 5355:1976; |
|
BSI BS EN 13160-6 |
Leak detection systems Part 6: Sensors in monitoring wells |
|
BSI BS EN 13262 |
Railway applications Wheelsets and bogies Wheels Product requirement |
|
BSI BS EN 13352 |
Specification for the performance of automatic tank contents gauges |
|
BSI BS EN 13382 |
Flat pallets for materials handling - Principal dimensions-CORR 14013: July 26, 2002; |
|
BSI BS EN 14658 |
Continuous handling equipment and systems General safety requirements for continuous handling equipment for opencast lignite mining |
|
BSI BS EN 1679-1 |
Reciprocating Internal Combustion Engines - Safety - Part 1: Compression Ignition Engines |
|
BSI BS EN 45510-6-4 |
Guide for Procurement of Power Station Equipment - Part 6-4: Turbine Auxiliaries - Pumps |
|
BSI BS EN 474-2 |
Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers |
|
BSI BS EN 50123-7-2 |
Railway applications Fixed installations D.C. switchgear Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems Isolating current transducers and other current measuring devices |
|
BSI BS EN 50152-3-2 |
Railway Applications - Fixed Installations - Particular Requirements for A.C. Switchgear - Part 3-2: Measurement, Control and Protection Devices for Specific Use in A.C. Traction Systems - Single-Phase Current Transformers |
|
BSI BS EN 50153 |
Railway applications Rolling stock Protective provisions relating to electrical hazards |
|
BSI BS EN 60654-4 |
Operating Conditions for Industrial-Process Measurement and Control Equipment Part 4: Corrosive and Erosive Influences-AMD 9957: April 1998; Renumbers BS 5967: Part 4: 1988; IEC 654-4: 1987 |
|
BSI BS EN 61069-2 |
Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment Part 2: Assessment Methodology (IEC 1069-2: 1993) (Q) |
|
BSI BS EN 61162-2 |
Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces - Part 2: Single Talker and Multiple Listeners, High-Speed Transmission-IEC 61162-2: 1998; |
|
BSI BS EN 790 |
Inland Navigation Vessels - Stairs with Inclination Angles of 45 Degree to 60 Degree - Requirements, Types |
|
BSI BS IEC 61501 |
Nuclear Reactor Instrumentation - Wide Range Neutron Fluence Rate Meter - Mean Square Voltage Method |
|
BSI BS ISO 11462-1 |
Guidelines for Implementation of Statistical Process Control (SPC) - Part 1: Elements of SPC |
|
BSI BS ISO 19921 |
Ships and marine technology Fire resistance of metallic pipe components with resilient and elastomeric seals Test methods |
|
BSI BS ISO 3322 |
Fluid Power Systems and Components - Cylinders - Nominal Pressures (Q) |
|
BSI BS ISO 6149-4 |
Connections for fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
|
BSI BS ISO 6264 |
Hydraulic Fluid Power - Pressure-Relief Valves - Mounting Surfaces-Supersedes BS 6494: Part 3: 1989; |
|
BSI BS ISO 799 |
Ships and marine technology Pilot ladders-Supersedes BS MA 92:1981 |
|
BSI BS 1090 |
Flameproof Hand-Held Electric Drilling Machines Primarily for Use in Mines |
|
BSI BS 1113 ENQ CASE INTRO |
Specification for Design and Manufacture of Water-Tube Steam Generating Plant (Including Superheaters, Reheaters and Steel Tube Economizers) Enquiry Cases - Introduction-Issue 2; |
|
BSI BS 3237 |
Light and Medium Rolling Stock for Mineral Haulage in Mines-Amd 1; |
|
BSI BS 3680 PART 6 |
Measurement of Liquid Flow in Open Channels: Part 6: Guide to Measurement of Flow in Tidal Channels (Q) |
|
BSI BS 4019 PART 3 |
Rotary Core Drilling Equipment Part 3: Specification for System A. Metric Units (ISO 3551-1: 1992) (Q) |
|
BSI BS 4344 |
Pulley Blocks for Use with Natural and Synthetic Fibre Ropes-Amd 3; |
|
BSI BS 5158 |
Cast Iron Plug Valves |
|
BSI BS 5667 PART 16 |
Continuous Mechanical Handling Equipment. Safety Requirements Part 16: Unit Loads: Slat Band Chain Conveyors |
|
BSI BS EN 12007-3 |
Gas Supply Systems - Pipelines for Maximum Operating Pressure up to and Including 16 Bar - Part 3: Specific Functional Recommendations for Steel |
|
BSI BS EN 1305 |
Inland Navigation Vessels - Connections for the Discharge of Oily Mixture (Q) |
|
BSI BS EN 1439 |
LPG equipment and accessories Transportable refillable welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders Procedure for checking before, during and after filling |
|
BSI BS EN 14767 |
LPG equipment and accessories Transportable refillable composite cylinders for Liquefied Petroleum Gas (LPG) Periodic inspection |
|
BSI BS EN 14841 |
LPG equipment and accessories Discharge procedures for LPG rail tankers |
|
BSI BS EN 50123-7-3 |
Railway applications Fixed installations D.C. switchgear Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems Isolating voltage transducers and other voltage measuring devices |
|
BSI BS EN 50152-3-3 |
Railway Applications - Fixed Installations - Particular Requirements for A.C. Switchgear - Part 3-3: Measurement, Control and Protection Devices for Specific Use in A.C. Traction Systems - Single-Phase Inductive Voltage Transformers |
|
BSI BS EN 50306-4 |
Railway applications Railway rolling stock cables having special fire performance Thin wall Part 4: Multicore and multipair cables standard wall sheathed |
|
BSI BS EN 50327 |
Railway applications Fixed installations Harmonisation of the rated values for converter groups and tests on converter groups |
|
BSI BS EN 50394-1 |
Electrical apparatus for potentially explosive atmospheres Group I Intrinsically safe systems Part 1: Construction and testing |
|
BSI BS EN 60654-3 |
Operating Conditions for Industrial-Process Measurement and Control Equipment Part 3: Mechanical Influences-AMD 9956: April 1998; Renumbers BS 5967: Part 3: 1984; IEC 654-3: 1983 |
|
BSI BS EN 60953-1 |
Rules for Steam Turbine Thermal Acceptance Tests Part 1: Method A: High Accuracy for Large Condensing Steam Turbines (IEC 953-1: 1990) (Q) |
|
BSI BS EN 61003-1 |
Industrial-process control systems Instruments with analogue inputs and two- or multi-state outputs Part 1: Methods of evaluating performance-IEC 61003-1:2004 |
|
BSI BS EN 61162-1 |
Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces - Part 1: Single Talker and Multiple Listeners-IEC 61162-1: 2000; |
|
BSI BS EN 61298-3 |
Process Measurement and Control Devices - General Methods and Procedures for Evaluating Performance Part 3: Tests for the Effects of Influence Quantities-IEC 61298-3: 1998; |
|
BSI BS EN ISO 10427-3 |
Petroleum and natural gas industries Equipment for well cementing Part 3: Performance testing of cementing float equipment-Supersedes BS ISO 18165:2001 |
|
BSI BS EN ISO 15749-1 |
Ships and marine technology Drainage systems on ships and marine structures Part 1: Sanitary drainage-system design |
|
BSI BS EN ISO 15749-5 |
Ships and marine technology Drainage systems on ships and marine structures Part 5: Drainage of decks, cargo spaces and swimming pools |
|
BSI BS EN ISO 16147 |
Small craft Inboard diesel engines Engine-mounted fuel and electrical components |
|
BSI BS EN ISO 5620-1 |
Shipbuilding and Marine Structures - Filling Connection for Drinking Water Tanks Part 1: General Requirements-Supersedes BS MA 85 : 1979; |
|
BSI BS EN ISO 5620-2 |
Shipbuilding and Marine Structures - Filling Connection for Drinking Water Tanks Part 2: Components-Supersedes BS MA 85: 1979; |
|
BSI BS EN ISO 8311 |
Refrigerated Light Hydrocarbon Fluids - Calibration of Membrane Tanks and Independent Prismatic Tanks in Ships Physical Measurement (AMD 8897) June 15, 1996 (Q)-Amd 1; |
|
BSI BS EN ISO 9875 |
Ships and Marine Technology - Marine Echo-Sounding Equipment-CORR 16278: September 29, 2006 |
|
BSI BS IEC 60609-2 |
Cavitation Pitting Evaluation in Hydraulic Turbines, Storage Pumps and Pump Turbines Part 2: Evaluation in Pelton Turbines-Corr 1; AMD 9968; March 15, 1998 (Corrigendum No.1); |
|
BSI BS IEC 60692 |
Nuclear Instrumentation - Density Gauges Utilizing Ionizing Radiation - Definitions and Test Methods |
|
BSI BS IEC 61097-2 |
Global maritime distress and safety system (GMDSS) Part 2: COSPAS-SARSAT EPIRB Satellite emergency position indicating radio beacon operating on 406 MHz Operational and performance requirements, methods of testing and required test results |
|
BSI BS ISO 10494 |
Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/ survey method-AMD 14748: November 14, 2003; Renumbers BS 7721:1994; |
|
BSI BS ISO 15370 |
Ships and marine technology Low-location lighting on passenger ships Arrangement |
|
BSI BS ISO 16874 |
Hydraulic fluid power Identification of manifold assemblies and their components |
|
BSI BS ISO 18813 |
Ships and marine technology Survival equipment for survival craft and rescue boats |
|
BSI BS MA 104 PART 1 |
Shipborne Barges Part 1: Main Dimensions |
|
BSI BS MA 25 |
Ships' Windows-Amd 1; |
|
BSI BS MA 97 |
Roll on/Roll off Ship- To-Shore Connection: Interface Between Terminals and Ships with Straight Stern/ Bow Ramps |
|
BSI DD ISO/PAS 28003 |
Security management systems for the supply chain Requirements for bodies providing audit and certification of supply chain security management systems |
|
BSI PAS 022 |
Construction of vapour recovery systems installed in petrol metering pumps and dispensers-AMD 10113: November 1998 |
|
BSI BS 2969 |
High-Tensile Steel Chains (Round Link) for Chain Conveyors and Coal Ploughs |
|
BSI BS 3447 |
Glossary of Terms Used in the Glass Industry-Amd 2; |
|
BSI BS 5126-1 |
Mining type flameproof supply and control units for use on systems up to 1100 V Part 1: Specification for direct-on-line motor starters |
|
BSI BS 5500 ENQ CASE INTRO |
Unfired Fusion Welded Pressure Vessels Enquiry Cases: Introduction-Issue 3; |
|
BSI BS 5667 PART 4 |
Continuous Mechanical Handling Equipment. Safety Requirements Part 4: Loose Bulk Materials: Mobile Suction Pipes Suspended from Derrick Jibs Used in Pneumatic Handling |
|
BSI BS 5671 |
Commissioning, Operation and Maintenance of Hydraulic Turbines |
|
BSI BS 5863 PART 2 |
Analogue Signals for Process Control Systems Part 2: Direct Voltage Signals |
|
BSI BS 6713 PART 4 |
Explosion Protection Systems Part 4: Method for Determination of Efficacy of Explosion Suppression Systems (ISO 6184/4: 1985) (AMD 7086) February 28, 1992-Amd 1; |
|
BSI BS 7465 |
Ships' Windows and Side Scuttles (ISO 6345: 1990) |
|
BSI BS 749 |
Underfeed Stokers |
|
BSI BS 779 |
Cast Iron Boilers for Central Heating and Indirect Hot Water Supply (Rated Output 44 kW and Above) (AMD 7704) July 15, 1993 (Q)-Amd 1;:1999 |
|
BSI BS 7844 PART 3 |
Three Phase Dry-Type Distribution Transformers 50 Hz, from 100 to 2500 kVA, with Highest Voltage for Equipment Not Exceeding 36 kV Part 3: Determination of the Power Rating of a Transformer Loaded with Non-Sinusoidal Current |
|
BSI BS EN 1175-2 |
Safety of Industrial Trucks - Electrical Requirements - Part 2: General Requirements for Internal Combustion Engine Powered Trucks |
|
BSI BS EN 12205 |
Transportable Gas Cylinders - Non-Refillable Metallic Gas cylinders |
|
BSI BS EN 12680-3 |
Founding Ultrasonic examination Part 3: Spheroidal graphite cast iron castings |
|
BSI BS EN 13129-1 |
Railway applications - Air conditioning for main line rolling stock - Part 1: Comfort parameters |
|
BSI BS EN 13530-3 |
Cryogenic Vessels - Large Transportable Vacuum Insulated Vessels - Part 3: Operational Requirements-AMD 15895: March 2006 |
|
BSI BS EN 14075 |
Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 and for installation underground Design and manufacture-AMD 15491:February 3, 2005 |
|
BSI BS EN 14200 |
Railway applications Suspension components Parabolic springs, steel |
|
BSI BS EN 14227-13 |
Hydraulically bound mixtures Specifications Part 13: Soil treated by hydraulic road binder |
|
BSI BS EN 14763 |
LPG equipment and accessories Transportable refillable composite cylinders for Liquefied Petroleum Gas (LPG) Procedure for checking before, during and after filling |
|
BSI BS EN 50123-4 |
Railway applications Fixed installations D.C. switchgear Part 4: Outdoor d.c. disconnectors, switch-disconnectors and earthing switches-Supersedes BS EN 50123-4:1999; |
|
BSI BS EN 61069-5 |
Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment Part 5: Assessment of System Dependability (IEC 1069-5: 1994) (Q) |
|
BSI BS EN 61069-6 |
Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment Part 6: Assessment of System Operability-IEC 61069-6: 1998; |
|
BSI BS EN 62290-1 |
Railway applications - Urban guided transport management and command/control systems - Part 1: System principles and fundamental concepts |
|
BSI BS EN ISO 14509 |
Small Craft - Measurement of Airborne Sound Emitted by Powered Recreational Craft-AMD 15362: December 2, 2004 |
|
BSI BS EN ISO 15584 |
Small Craft - Inboard Petrol Engines - Engine-Mounted Fuel and Electrical Components |
|
BSI BS EN ISO 15749-2 |
Ships and marine technology Drainage systems on ships and marine structures Part 2: Sanitary drainage, drain piping for gravity system |
|
BSI BS EN ISO 19879 |
Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections-CORR 17086: May 31, 2007 |
|
BSI BS EN ISO 340 |
Conveyor belts Laboratory scale flammability characteristics Requirements and test method-Supersedes BS EN 20340:1993 |
|
BSI BS EN ISO 4375 |
Hydrometric determinations Cableway systems for stream gauging-AMD 15167:May 6, 2004; Supersedes BS 3680-8D:1980; Renumbers BS ISO 4375:2000 |
|
BSI BS EN ISO 6185-3 |
Inflatable Boats - Part 3: Boats with a Maximum Motor Power Rating of 15 kW and Greater-CORR 13891: April 25, 2002; Together with BS EN ISO 6185-1: 2001 and BS EN ISO 6185-2: 2001, Supersedes BS MA 16: 1971; |
|
BSI BS IEC 61334-3-1 |
Distribution automation using distribution line carrier systems Part 3-1: Mains signalling requirements Frequency bands and output levels |
|
BSI BS IEC 61504 |
Nuclear Power Plants - Instrumentation and Control Systems Important to Safety - Plant-Wide Radiation Monitoring |
|
BSI BS ISO 11629 |
Cranes Measurement of the mass of a crane and its components |
|
BSI BS ISO 13591 |
Small Craft - Portable Fuel Systems for Outboard Motors |
|
BSI BS ISO 14612 |
Ships and marine technology Ship’s bridge layout and associated equipment Requirements and guidelines for centralized and integrated bridge functions |
|
BSI BS ISO 15837 |
Ships and marine technology Gasketed mechanical couplings for use in piping systems Performance specification |
|
BSI BS ISO 2929 |
Rubber hoses and hose assemblies for bulk fuel delivery by truck Specification |
|
BSI BS ISO 5285 |
Conveyor belts Guidelines for storage and handling-Supersedes BS 5767:1979 |
|
BSI BS ISO 5797 |
Ships and marine technology Windows and side scuttles for fire-resistant constructions-Supersedes BS 7469-1:1991 |
|
BSI BS ISO 7789 |
Corr.1 Hydraulic Fluid Power - Two-, Three- and Four-Port Screw-In Cartridge Valves - Cavities-CORR 10540; September 1999; |
|
BSI BS ISO 9650-1 |
Small craft Inflatable liferafts Part 1: Type I |
|
BSI BS ISO 9650-2 |
Small craft Inflatable liferafts Part 2: Type II |
|
BSI BS MA 29 |
Steel Wire Rope and Strand for Yachts |
|
BSI BS MA 86 |
Glossary of Terms used in shipbuilding: list of equivalent terms for ship screw propellers-ISO 3715: 1978; |
|
BSI PD CR 12953-14 |
Shell Boilers - Part 14: Guideline for Involvement of an Inspection Body Independent of the Manufacturer |
|
BSI BS 1659 |
Tractive Armature Direct-Current Neutral Track and Line Relays for Railway Signalling-Amd 3; |
|
BSI BS 2790 CASE 23 |
Design and Manufacture of Shell Boilers of Welded Construction Enquiry Cases: Case 23: Ultrasonic Examination of Welds |
|
BSI BS 3682-1 |
Railway Brake Hose Part 1: Specification for Compressed Air Brake Hose |
|
BSI BS 3876 PART 1 |
Rope Rollers and Mountings for Colliery Track Haulage Part 1: Parallel Barrel Rollers, Mountings and Assemblies |
|
BSI BS 4676 |
Protective clothing Footwear and gaiters for use in molten metal foundries Requirements and test methods |
|
BSI BS 5667 PART 15 |
Continuous Mechanical Handling Equipment. Safety Requirements Part 15: Unit Loads: Crate Carrying Chain Conveyors Having Biplanar Chains for Flat-Bottomed Unit Loads |
|
BSI BS 7019 |
Fully Screened 400 A Bolted Flameproof Cable Couplers and Adaptors for Use on Systems up to and Including 6.6 kV, Primarily for Use in Mines |
|
BSI BS 7467 |
Symbols for Computer Applications in Ship Building and Marine Technology (ISO 7463: 1990) |
|
BSI BS 7550 PART 2 |
Calibration of Spherical Tanks for Refrigerated Light-Hydrocarbon Fluids in Ships Part 2: Triangulation Method (ISO 9091-2: 1992) (Q) |
|
BSI BS EN 12080 |
Railway Applications - Axleboxes - Rolling Bearings |
|
BSI BS EN 12544-3 |
Non-Destructive Testing-Measurement and Evaluation of the X-Ray Tube Voltage-Part 3: Spectrometric Method |
|
BSI BS EN 1306 |
Inland Navigation Vessels - Connections for the Discharge of Waste Water (Q) |
|
BSI BS EN 13160-7 |
Leak detection systems Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets |
|
BSI BS EN 13260 |
Railway applications Wheelsets and bogies Wheelsets Products requirements |
|
BSI BS EN 14276-1 |
Pressure equipment for refrigerating systems and heat pumps Part 1: Vessels General requirements |
|
BSI BS EN 14398-2 |
Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing-CORR 16821: December 29, 2006; AMD 17144: June 29, 2007 |
|
BSI BS EN 14606 |
Inland navigation vessels Studless anchor chain Accessories |
|
BSI BS EN 14973 |
Conveyor belts for use in underground installations Electrical and flammability safety requirements-Partially Supersedes BS 3289:2005 |
|
BSI BS EN 1918-1 |
Gas Supply Systems - Underground Gas Storage - Part 1: Functional Recommendations for Storage in Aquifers |
|
BSI BS EN 45510-6-7 |
Guide for Procurement of Power Station Equipment - Part 6-7: Turbine Auxiliaries - Moisture Separator Reheaters |
|
BSI BS EN 45510-6-9 |
Guide for Procurement of Power Station Equipment - Part 6-9: Turbine Auxiliaries - Cooling Water Systems |
|
BSI BS EN 61064 |
Acceptance Tests for Steam Turbine Speed Control Systems (IEC 1064: 1991) (Q) |
|
BSI BS EN 61069-3 |
Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment Part 3: Assessment of System Functionality-IEC 1069-3: 1996; |
|
BSI BS EN 61512-1 |
Batch Control - Part 1: Models and Terminology-IEC 61512-1:1997; |
|
BSI BS EN 61822 |
Electrical installations for lighting and beaconing of aerodromes Constant current regulators |
|
BSI BS EN 620 |
Continuous handling equipment and systems Safety and EMC requirements for fixed belt conveyors for bulk materials-CORR 14439:April 3, 2003; |
|
BSI BS EN 62252 |
Maritime navigation and radiocommunication equipment and systems Radar for craft not in compliance with IMO SOLAS Chaper V Performance requirements, methods of test and required test results |
|
BSI BS EN ISO 12217-1 |
Small Craft Stability and Buoyancy Assessment and Categorization Part 1: Non-Sailing Boats of Hull Length Greater Than or Equal to 6 m-CORR 14022: August 13, 2002; |
|
BSI BS EN ISO 15084 |
Small craft Anchoring, mooring and towing Strong points-CORR 14483: May 14, 2003; |
|
BSI BS EN ISO 15085 |
Small craft Man-overboard prevention and recovery-CORR 14612: August 11, 2003; |
|
BSI BS EN ISO 15749-4 |
Ships and marine technology Drainage systems on ships and marine structures Part 4: Sanitary drainage, sewage disposal pipes |
|
BSI BS EN ISO 16135 |
Industrial valves Ball valves of thermoplastic materials |
|
BSI BS EN ISO 8384 |
Ships and Marine Technology - Dredgers - Vocabulary-CORR 13356:September 2001; Supersedes BS 7473:1991; |
|
BSI BS IEC 60397 |
Test Methods for Batch Furnaces with Metallic Heating Resistors-Supersedes BS 7749: 1994; |
|
BSI BS IEC 61468 |
Nuclear power plants In-core instrumentation Characteristics and test methods of self-powered neutron detectors-AMD 15364:September 9, 2004 |
|
BSI BS ISO 13617 |
Ships and Marine Technology - Shipboard Incinerators - Requirements |
|
BSI BS ISO 16329 |
Ships and marine technology Heading control systems for high-speed craft |
|
BSI BS ISO 16422 |
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure Specifications |
|
BSI BS ISO 16446 |
Ships and Marine Technology Marine Environmental Protection Adaptor for Joining Dissimilar Boom Connectors |
|
BSI BS ISO 4409 |
Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance |
|
BSI BS ISO TR 11974 |
Measurement of Liquid Flow in Open Channels - Electromagnetic Current Meters |
|
BSI BS MA 82 |
Shipbuilding - Oil and water drain screws-ISO 5483: 1977; |
|
BSI PD CLC/TR 50126-2 |
Railway applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 2: Guide to the application of EN 50126-1 for safety |
|
BSI PD IEC TR 61774 |
Overhead Lines - Meteorological Data for Assessing Climatic Loads |
|
BSI PD ISO/PAS 20858 |
Ships and marine technology Maritime port facility security assessments and security plan development |
|
BSI BS 1745 |
Alternating-Current Relays for Railway Signalling: Track Relays (Double-Element, 2-Position), Line Relays (Single-Element, 2-Position)-Amd 2; Replaces BS 520: 1993 and BS 557: 1934 |
|
BSI BS 2589 |
Railway Track Spanners |
|
BSI BS 3288 PART 3 |
Insulator and Conductor Fittings for Overhead Power Lines Part 3: Dimensions of Ball and Socket Couplings of String Insulator Units |
|
BSI BS 3710 |
Brake Hose Couplings for Locomotives and Rolling Stock |
|
BSI BS 3810 PART 6 |
Glossary of Terms Used in Materials Handling Part 6: Terms Used in Connection with Pulley Blocks |
|
BSI BS 4337 |
Principal Dimensions of Hand-Operated Stillage Trucks |
|
BSI BS 5500E/C INTRO ISSUE8 |
Unfired Fusion Welded Pressure Vessels Enquiry Cases: Introduction (Q) |
|
BSI BS 5667 PART 17 |
Continuous Mechanicals Handling Equipment. Safety Requirements Part 17: Unit Loads: Continuous Plate Conveyors (Horizontal) |
|
BSI BS 5778 |
Methods of Test for Verification of Stability of Industrial Trucks Operating in Special Condition of Stacking with Mast Tilted Forward |
|
BSI BS 5816 |
Dimensions of Rotary Vane Feeders for Continuous Mechanical Handling Equipment |
|
BSI BS 6318 PART 1 |
Bucket Elevators Part 1: Classification of Bucket Elevators |
|
BSI BS 6591 |
Scraper Bars for Chain Conveyors for Mining-ISO 5612: 1984; |
|
BSI BS 6680 |
Flameproof Equipment for Diesel Engines for the Use in Coal Mines and Other Mines Susceptible to Firedamp |
|
BSI BS 6713 PART 3 |
Explosion Protection Systems Part 3: Method for Determination of Explosion Indices of Fuel/Air Mixtures Other Than Dust/Air and Gas/Air Mixtures (ISO 6184/3: 1985) (AMD 7085) February 28, 1992-Amd 1; |
|
BSI BS 7515 |
Radiation Protection Instrumentation - Portable Potential Alpha Energy Meter for Rapid Measurements in Mines (IEC 1263: 1994) (Q) |
|
BSI BS 7871 PART 1 |
Pneumatic Conveying Part 1: Glossary of Terms (Q) |
|
BSI BS 7871 PART 2 |
Pneumatic Conveying Part 2: Glossary of Equipment |
|
BSI BS EN 1151-2 |
Pumps Rotodynamic pumps Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations Part 2: Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise-Supersedes BS EN 1151:1999 |
|
BSI BS EN 12351 |
Industrial Valves - Protective Caps for Valves with Flanged Connections |
|
BSI BS EN 12380 |
Air admittance valves for drainage systems Requirements, test methods and evaluation of conformity |
|
BSI BS EN 12663 |
Railway Applications - Structural Requirements of Railway Vehicle Bodies |
|
BSI BS EN 12895 |
Industrial Trucks - Electromagnetic Compatibility |
|
BSI BS EN 12927-6 |
Safety requirements for cableway installations designed to carry persons Ropes Part 6: Discard criteria |
|
BSI BS EN 13104 |
Railway Applications - Wheelsets and Bogies - Powered Axles - Design Method |
|
BSI BS EN 13645 |
Installations and Equipment for Liquefied Natural Gas - Design of Onshore Installations with a Storage Capacity between 5 t and 200 t |
|
BSI BS EN 14034-2 |
Determination of explosion characteristics of dust clouds Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds |
|
BSI BS EN 14197-3 |
Cryogenic vessels Static non-vacuum insulated vessels Part 3: Operational requirements-CORR 15389:October 4, 2004; AMD 15894: September 29, 2006 |
|
BSI BS EN 14206 |
Inland navigation vessels Gangways for passenger vessels Requirements, tests |
|
BSI BS EN 14343 |
Rotary positive displacement pumps Performance tests for acceptance |
|
BSI BS EN 14433 |
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Foot valves |
|
BSI BS EN 14467 |
Recreational diving services Requirements for recreational scuba diving service providers |
|
BSI BS EN 14503 |
Inland navigation vessels Harbours for inland navigation |
|
BSI BS EN 14531-1 |
Railway applications Methods for calculation of stopping distances, slowing distances and immobilization braking Part 1: General algorithms |
|
BSI BS EN 14535-1 |
Railway applications Brake discs for railway rolling stock Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements |
|
BSI BS EN 14744 |
Inland navigation vessels and sea-going vessels Navigation light |
|
BSI BS EN 26948 |
Production and Performance Characteristic Tests for Automatic Steam Traps (ISO 6948: 1981) |
|
BSI BS EN 50183 |
Conductors for Overhead Lines - Aluminium-Magnesium-Silicon Alloy Wires-Supersedes BS 3242:1970; |
|
BSI BS EN 50264-1 |
Railway applications Railway rolling stock cables having special fire performance Standard wall Part 1: General requirements |
|
BSI BS EN 50306-3 |
Railway applications Railway rolling stock cables having special fire performance Thin wall Part 3: Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed |
|
BSI BS EN 50317 |
Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line-AMD 15501:January 28, 2005; AMD 17009: May 31, 2007 |
|
BSI BS EN 50345 |
Railway applications Fixed installations Electric traction Insulating synthetic rope assemblies for support of overhead contact lines |
|
BSI BS EN 60041 |
Field Acceptance Tests to Determine the Hydraulic Performance of Hydraulic Turbines, Storage Pumps and Pump- Turbines (Q) |
|
BSI BS EN 60770-1 |
Transmitters for Use in Industrial-Process Control Systems - Part 1: Methods for Performance Evaluation-Supersedes BS 4509: 1985; IEC 60770-1: 1999; |
|
BSI BS EN 60953-2 |
Rules for Steam Turbine Thermal Acceptance Tests Part 2: Method B: Wide Range of Accuracy for Various Types and Sizes of Turbines-AMD 9860; February 15, 1998; Supersedes BS 752: 1974 and BS 5968: 1980; IEC 953-2: 1990; |
|
BSI BS EN 61854 |
Overhead Lines - Requirements and Tests for Spacers-IEC 61854: 1998; |
|
BSI BS EN 619 |
Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of unit loads |
|
BSI BS EN 61993-1 |
Maritime Navigation and Radiocommunication Equipment and Systems - Part 1: Shipbourne Automatic Transponder System Installation Using VHF Digital Selective Calling (DSC) Techniques - Operational and Performance Requirements, Methods of Testing and Required Test Results-IEC 61993-1:1999; |
|
BSI BS EN ISO 12215-3 |
Small Craft - Hull Construction and Scantlings - Part 3: Materials: Steel, Aluminium Alloys, Wood, Other Materials-CORR 13995: July 15, 2002 |
|
BSI BS EN ISO 12215-4 |
Small Craft - Hull Construction and Scantlings - Part 4: Workshop and Manufacturing-CORR 14012: August 2, 2002; |
|
BSI BS EN ISO 12217-2 |
Small Craft Stability and Buoyancy Assessment and Categorization Part 2: Sailing Boats of Hull Length Greater Than or Equal to 6 m-CORR 14023: August 13, 2002; |
|
BSI BS EN ISO 12217-3 |
Small craft Stability and buoyancy assessment and categorization Part 3: Boats of hull length less than 6 m |
|
BSI BS EN ISO 14946 |
Small Craft - Maximum Load Capacity-CORR 16062:July 2006 |
|
BSI BS EN ISO 16148 |
Gas cylinders Refillable seamless steel gas cylinders Acoustic emission testing (AT) for periodic inspection |
|
BSI BS EN ISO 2867 |
Earth-moving machinery Access systems |
|
BSI BS EN ISO 9283 |
Manipulating Industrial Robots - Performance Criteria and Related Test Methods-AMD 10558; August 1999; |
|
BSI BS EN ISO 9787 |
Manipulating Industrial Robots - Coordinate Systems and Motion Nomenclatures-Supersedes BS 7228-2: 1991; |
|
BSI BS EN ISO 9946 |
Manipulating Industrial Robots - Presentation of Characteristics-Supersedes BS 7228-3: 1991; |
|
BSI BS ISO 11630 |
Cranes - Measurement of Wheel Alignment |