|
BSI BS ISO 17339 |
Ships and marine technology Sea anchors for survival craft and rescue boats |
|
BSI BS ISO 17884 |
Ships and marine technology Searchlights for high-speed craft |
|
BSI BS ISO 19018 |
Ships and marine technology Terms, abbreviations, graphical symbols and concepts on navigation |
|
BSI BS ISO 6055 |
Industrial trucks Overhead guards Specification and testing |
|
BSI BS ISO 6981 |
Hydraulic Fluid Power - Cylinders - Rod End Plain Eyes - Mounting Dimensions (Q) |
|
BSI BS ISO 8323 |
Freight Containers - Air/Surface (Intermodel) General Purpose Containers - Specification and Tests (Q) |
|
BSI BS MA 2 PART 4 |
Magnetic Compasses and Binnacles Part 4: Glossary of Terms |
|
BSI BS MA 5 |
Brass Service Nameplates for Valves |
|
BSI BS MA 90 |
Embarkation Ladders |
|
BSI PD CLC/TR 50426 |
Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation Guide-Corrigendum 15741: December 13, 2005; Supersedes BS 6656:2002 |
|
BSI BS 2567 |
Non-Powered Roller Conveyors |
|
BSI BS 3446-2 |
Glossary of Terms associated with refractory materials Part 2: Applications in the coke, glass, cement and other non-metallurgical industries-Together with BS 3446-1 and BS 3446-3 supersedes BS 3446: 1962 |
|
BSI BS 3618 SEC 10 |
Glossary of Mining Terms Section 10: Transport |
|
BSI BS 3810 PART 2 |
Glossary of Terms Used in Materials Handling Part 2: Terms Used in Connection with Conveyors and Elevators (Excluding Pneumatic and Hydraulic Handling)-Amd 1 |
|
BSI BS 3818 |
Self-Sealing Fuelling Couplings for Diesel Locomotives and Diesel Railcars |
|
BSI BS 4019 PART 4 |
Rotary Core Drilling Equipment Part 4: Specification for System A. Inch Units (ISO 3551-2: 1992) (Q) |
|
BSI BS 4531 |
Portable and Mobile Troughed Belt Conveyors |
|
BSI BS 500 |
Steel Sleepers |
|
BSI BS 5125 |
Specification for 50A 650V flameproof, restrained and bolted plugs and sockets for use in coal mines |
|
BSI BS 5500 ENQ CASE 73 |
Enquiry Case Case 73: Use of Enhanced 2 1/4 Cr 1 Mo Steel in Welded Pressure Vessels Complying with BS 5500 (Q) |
|
BSI BS 5667 PART 13 |
Continuous Mechanical Handling Equipment. Safety Requirements Part 13: Unit Loads: Arm Elevators and Push Bar Conveyors |
|
BSI BS 5667 PART 8 |
Continuous Mechanical Handling Equipment. Safety Requirements Part 8: Loose Bulk Materials: Hand- Operated Power Shovels |
|
BSI BS 5978-1 |
Safety and performance of gas-fired hot water boilers (60 kW to 2 MW input) Part 1: Specification for general requirements |
|
BSI BS 7228 PART 6 |
Industrial Robots Part 6: Recommendations for Safety (AMD 7377) March 15, 1993-Amd 1; |
|
BSI BS 7852 |
Code of Practice for Design of Canoes and Kayaks-Supersedes BS MA 91: Part 1: 1981 and Part 2: 1981 |
|
BSI BS 8435 |
Small craft Reserve flotation Boats up to six metres length of hull |
|
BSI BS EN 12007-2 |
Gas Supply Systems - Pipelines for Maximum Operating Pressure up to and Including 16 Bar - Part 2: Specific Functional Recommendations for Polyethylene (MOP up to and Including 10 Bar) |
|
BSI BS EN 13079 |
Devices to prevent pollution by backflow of potable water Air gap with injector Family A-Type D |
|
BSI BS EN 13223 |
Safety requirements for cableway installations designed to carry persons Drive systems and other mechanical equipment |
|
BSI BS EN 13230-1 |
Railway applications Track Concrete sleepers and bearers Part 1: General requirements |
|
BSI BS EN 13481-5 |
Railway Applications - Track - Performance Requirements for Fastening Systems - Part 5: Fastening Systems for Slab Track-AMD 16591:September 29, 2006 |
|
BSI BS EN 13918 |
Gas welding equipment Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes Classification, specification and tests |
|
BSI BS EN 14409-1 |
Plastics piping systems for renovation of underground water supply networks Part 1: General |
|
BSI BS EN 14741 |
Thermoplastics piping and ducting systems Joints for buried non-pressure applications Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure |
|
BSI BS EN 1551 |
Safety of Industrial Trucks - Self Propelled Trucks over 10 000 KG Capacity |
|
BSI BS EN 1889-2 |
Machines for underground mines Mobile machines working underground Safety Part 2: Rail locomotives |
|
BSI BS EN 1918-5 |
Gas Supply Systems - Underground Gas Storage - Part 5: Functional Recommendations for Surface Facilities |
|
BSI BS EN 29519 |
Shipbuilding and Marine Structures - Rungs for Dog-Step Ladders-AMD 8251: July 15, 1994; Renumbers BS 7468:1991; ISO 9519:1990 |
|
BSI BS EN 50123-3 |
Railway Applications - Fixed Installations D.C. Switchgear - Part 3: Indoor D.C. Disconnectors and Switch-Disconnectors |
|
BSI BS EN 50206-1 |
Railway Applications - Rolling Stock - Pantographs: Characteristics and Tests - Part 1: Pantographs for Main Line Vehicles |
|
BSI BS EN 60433 |
Insulators for Overhead Lines with a Nominal Voltage Above 1 kV - Ceramic Insulators with a.c. Systems - Characteristics of Insulator Units of the Long Rod Type-IEC 60433: 1998; |
|
BSI BS EN 60609-1 |
Hydraulic turbines, storage pumps and pump-turbines Cavitation pitting evaluation Part 1: Evaluation in reaction turbines, storage pumps and pump-turbines |
|
BSI BS EN 61325 |
Insulators for Overhead Lines with a Nominal Voltage above 1 000 V - Ceramic or Glass Insulator Units for D.C. Systems - Definitions, Test Methods and Acceptance Criteria-IEC 1325: 1995; |
|
BSI BS EN 61377-2 |
Railway applications Rolling stock Combined testing Part 2: Chopper-fed direct current traction motors and their control |
|
BSI BS EN ISO 11105 |
Small Craft - Ventilation of Petrol Engine and/or Petrol Tank Compartments |
|
BSI BS EN ISO 11674 |
Ships and Marine Technology - Heading Control Systems-CORR 13650: January 24, 2002; |
|
BSI BS EN ISO 15463 |
Petroleum and natural gas industries Field inspection of new casing, tubing and plain-end drill pipe |
|
BSI BS EN ISO 21183-1 |
Light conveyor belts Part 1: Principal characteristics and applications-Supersedes BS EN 873:1997 |
|
BSI BS EN ISO 3126 |
Plastics piping systems Plastics components Determination of dimensions-Supersedes BS 2782-11 Method 1101A:1981 |
|
BSI BS EN ISO 6042 |
Ships and Marine Technology - Weathertight Single-Leaf Steel Doors-Supersedes BS MA 38: 1973; |
|
BSI BS EN ISO 6149-1 |
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal-AMD 17047: March 30, 2007 |
|
BSI BS EN ISO 6259-1 |
Thermoplastics pipes Determination of tensile properties Part 1: General test method-Supersedes BS EN 638:1995 |
|
BSI BS ISO 10416 |
Petroleum and natural gas industries Drilling fluids Laboratory testing |
|
BSI BS ISO 10767-1 |
Hydraulic Fluid Power - Determination of Pressure Ripple Levels Generated in Systems and Components Part 1: Precision Method for Pumps (Q) |
|
BSI BS ISO 14853 |
Plastics Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system Method by measurement of biogas production |
|
BSI BS ISO 16165 |
Ships and Marine Technology - Marine Environment Protection - Terminology Relating to Oil Spill Response |
|
BSI BS ISO 3724 |
Hydraulic Fluid Power - Filter Elements - Verification of Flow Fatigue Characteristics (Q)-Supersedes BS 6275 Part 2: 1984 |
|
BSI BS ISO 5894 |
Ships and Marine Technology - Manholes with Bolted Covers-Partially Supersedes BS MA 7: 1983; |
|
BSI BS ISO 6580 |
General-purpose industrial fans Circular flanges Dimensions-Supersedes BS 6339:1983; Also Known AS BS 6339: 2005 |
|
BSI BS ISO 8132 |
Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series Mounting dimensions for accessories |
|
BSI BS ISO 9974-4 |
Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
|
BSI BS MA 48 |
Code of Practice for Design and Operation of Ships' Derrick Rigs |
|
BSI DD CEN/TS 14541 |
Plastics pipes and fittings for non-pressure applications - Utilisation of non-virgin PVC-U, PP and PE materials |
|
BSI PD 5482-3 |
Code of practice for domestic butane and propane gas-burning installations Part 3: Installations in boats, yachts and other vessels |
|
BSI PD IEC/PAS 60936-5 |
Maritime navigation and radiocommunication equipment and systems Radar Part 5: Guidelines for the use and display of AIS information on radar |
|
BSI BS 1113 ENQ CASE 7 |
Enquiry Case 7: Use of Butt Welds in Tubes for Manufacture of Coil Type Boilers/ Superheaters-Issue 2; |
|
BSI BS 2790 CASE 27 |
Design and Manufacture of Shell Boilers of Welded Construction Enquiry Cases: Case 27: Furnace Stiffening Rings |
|
BSI BS 3618 SEC 2 |
Glossary of Mining Terms Section 2: Ventilation |
|
BSI BS 3810 PART 3 |
Glossary of Terms Used in Materials Handling Part 3: Terms Used in Connection with Pneumatic and Hydraulic Handling |
|
BSI BS 3812 |
Recommendations for Estimating the Dryness of Saturated Steam |
|
BSI BS 4409 PART 2 |
Screw Conveyors Part 2: Specification for Portable and Mobile Type (Augers) |
|
BSI BS 4878 |
Large (Vee-Throated) Haulage Rope Pulleys for Mines and Quarries (Q) |
|
BSI BS 5801 |
Flat-Top Chains and Associated Chainwheels for Conveyors |
|
BSI BS 5857 SEC 2.4 |
Measurement of Fluid Flow in Closed Conduits, Using Tracers Part 2: Measurement of Gas Flow Section 2.4: Transit Time Method Using Radioactive Tracers |
|
BSI BS 6182-1 |
Intrinsically safe power supplies for use in coal mines Part 1: Specification for d.c. power supplies |
|
BSI BS 6353 |
Specification for Underground Loudspeaker Communication Systems in Coal Mines |
|
BSI BS 6407-1 |
Cage Pallets for Retail Use Part 1: Collapsible Cage Pallets Rated at 300 kg |
|
BSI BS 6407-2 |
Cage Pallets for Retail Use Part 2: Guide to the Safe Handling and Use of Collapsible Cage Pallets Rated at 300 kg |
|
BSI BS 7118 PART 2 |
Measurement of Fluid Flow: Assessment of Uncertainty in the Calibration and Use of Flow Measurement Devices Part 2: Non-Linear Calibration Relationships |
|
BSI BS 7294 |
Method for Determination of Flow-Rate Characteristics of Pneumatic Fluid Power Components |
|
BSI BS 7472 |
Shipborne Barges of All Series (ISO 9382: 1990) |
|
BSI BS 7906-2 |
Lifting Equipment for Perfomance, Broadcast and Similar Applications - Part 2: Code of Practice for Use of Aluminium and Steel Trusses and Towers-CORR 11026; July 2000 |
|
BSI BS EN 13056 |
Inland Navigation Vessels - Stairs with Inclination Angles of 30 Degree to Less Than 45 Degree - Requirements, Types |
|
BSI BS EN 13232-3 |
Railway applications Track Switches and crossings Part 3: Requirements for wheel/rail interaction |
|
BSI BS EN 13481-8 |
Railway applications Track Performance requirements for fastening systems Part 8: Fastening systems for track with heavy axle loads |
|
BSI BS EN 13573 |
Inland Navigation Vessels - Anchoring, Coupling, Towing, Hauling and Mooring Systems |
|
BSI BS EN 13611 |
Safety and Control Devices for Gas Burners and Gas-Burning Appliances - General Requirements-AMD 15544: May 11, 2005 |
|
BSI BS EN 13848-1 |
Railway applications/Track Track geometry quality Part 1: Characterisation of track geometry |
|
BSI BS EN 14067-2 |
Railway applications - Aerodynamics - Part 2: Aerodynamics on open track |
|
BSI BS EN 14398-3 |
Cryogenic vessels Large transportable non-vacuum insulated vessels Part 3: Operational requirements-AMD 15917: March 2006 |
|
BSI BS EN 14513 |
Transportable gas cylinders Bursting disc pressure relief devices (excluding acetylene gas cylinders) |
|
BSI BS EN 14525 |
Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, Grey iron, Steel, PVC-U, PE, Fibre-cement |
|
BSI BS EN 14811 |
Railway applications Track Special purpose rail Grooved and associated construction |
|
BSI BS EN 1726-1 |
Safety of industrial trucks Self-propelled trucks up to and including 10 000 kg capacity and industrial tractors with a drawbar pull up to and including 20 000 N Part 1: General requirements-AMD 14924: March 19, 2003 |
|
BSI BS EN 1918-3 |
Gas Supply Systems - Underground Gas Storage - Part 3: Functional Recommendations for Storage in Solution-Mined Salt Cavities |
|
BSI BS EN 1925 |
Natural Stone Test Methods - Determination of Water Absorption Coefficient by Capillarity |
|
BSI BS EN 26553 |
Marking of Automatic Steam Traps (Q) (ISO 6553: 1980) |
|
BSI BS EN 415-1 |
Packaging Machines Safety - Part 1: Terminology and Classification of Packaging Machines and Associated Equipment |
|
BSI BS EN 50238 |
Railway applications - Compatibility between rolling stock and train detection systems |
|
BSI BS EN 61377-3 |
Railway applications Rolling stock Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control system |
|
BSI BS EN 61897 |
Overhead Lines - Requirements and Tests for Stockbridge Type Aeolian Vibration Dampers-IEC 61897: 1998; |
|
BSI BS EN 61996-2 |
Maritime navigation and radiocommunication equipment and systems Shipborne voyage data recorder (VDR) Part 2: Simplified voyage data recorder (S-VDR) Performance requirements, methods of testing and required test results-CORR 16557: September 29, 2006;:2005 |
|
BSI BS EN 62320-1 |
Maritime navigation and radiocommunication equipment and systems - Automatic Identification Systems (AIS) - Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of testing and required test results |
|
BSI BS EN 735 |
Overall Dimensions of Rotodynamic Pumps - Tolerances (Q) |
|
BSI BS EN ISO 12215-2 |
Small Craft - Hull Construction and Scantlings - Part 2: Materials: Core Materials for Sandwich Construction, Embedded Materials-CORR 13994: July 15, 2002; |
|
BSI BS EN ISO 12680-1 |
Methods of test for refractory products - Part 1: Determination of dynamic Young’s modulus (MOE) by impulse excitation of vibration-AMD 17038: March 30, 2007 |
|
BSI BS EN ISO 15749-3 |
Ships and marine technology Drainage systems on ships and marine structures Part 3: Sanitary drainage, drain piping for vacuum system |
|
BSI BS EN ISO 21178 |
Light conveyor belts Determination of electrical resistances-Supersedes BS EN 1637:1999 |
|
BSI BS EN ISO 21180 |
Light conveyor belts Determination of the maximum tensile strength |
|
BSI BS EN ISO 21787 |
Industrial valves Globe valves of thermoplastics materials |
|
BSI BS EN ISO 3715-1 |
Ships and marine technology Propulsion plants for ships Part 1: Vocabulary for geometry of propellers |
|
BSI BS EN ISO 445 |
Pallets for Materials Handling - Vocabulary-AMD 10401: 3/1999; Supersedes BS 6637: 1985; ISO 445: 1996; Renumbers BS ISO 445: 1996 |
|
BSI BS EN ISO 9093-2 |
Small craft Seacocks and through-hull fittings Part 2: Non-metallic |
|
BSI BS EN ISO 9785 |
Ship and marine technology Ventilation of cargo spaces where vehicles with internal combustion engines are driven Calculation of theoretical total airflow required-CORR 14127: October 10, 2002; |
|
BSI BS IEC 62118 |
Nuclear Reactor Instrumentation - Pressurized Water Reactor (PWR) of VVER Design - Monitoring Adequate Cooling within the Core During Cold Shutdown |
|
BSI BS ISO 10147 |
Pipes and Fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content |
|
BSI BS ISO 10815 |
Mechanical Vibration - Measurement of Vibration Generated Internally in Railway Tunnels by the Passage of Trains |
|
BSI BS ISO 13563-1 |
Single Side Loading Fork-Lift Trucks - Part 1: Stability Tests |
|
BSI BS ISO 14245 |
Gas cylinders Specifications and testing of LPG cylinder valves Self-closing |
|
BSI BS ISO 15402 |
Ships and Marine Technology - Bulk Carriers - Repair Quality of Hull Structure |
|
BSI BS ISO 15736 |
Ships and marine technology Pyrotechnic life-saving appliances Testing, inspection and marking of production units |
|
BSI BS ISO 15794 |
Bi-Directional and Multi-Directional Fork-Lift Trucks - Stability Tests |
|
BSI BS ISO 18752 |
Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification |
|
BSI BS ISO 18770 |
Ships and marine technology Machinery-space flammable oil systems Prevention of leakage of flammable oil |
|
BSI BS ISO 21561 |
Styrene-butadiene rubber (SBR) Determination of the microstructure of solution-polymerized SBR |
|
BSI BS ISO 22090-3 |
Ships and marine technology Transmitting heading devices (THDs) Part 3: GNSS principles-CORR 15580: April 25, 2005 |
|
BSI BS ISO 3434 |
Shipbuilding and marine structures Heated glass panes for ships’ rectangular windows-Supersedes BS MA 88:1980 |
|
BSI BS ISO 4250-2 |
Earth-mover tyres and rims Part 2: Loads and inflation pressures-: 1997 |
|
BSI BS ISO 5008 |
Agricultural Wheeled Tractors and Field Machinery Measurement of Whole-Body Vibration of the Operator-Supersedes BS 6055: 1981; |
|
BSI BS ISO 5293 |
Conveyor belts Determination of minimum transition distance on three idler rollers |
|
BSI BS ISO 8535-2 |
Compression-ignition engines Steel tubes for high-pressure fuel injection pipes Part 2: Requirements for composite tubes |
|
BSI BS ISO 923 |
Coal Cleaning Equipment - Performance Evaluation-Supersedes BS 3620:1963; |
|
BSI BS ISO 9897 |
Freight Containers - Container Equipment Data Exchange (CEDEX)- General Communication Codes-Supersedes BS ISO 9897-1: 1990 and BS ISO 9897-3: 1990; |
|
BSI BS ISO/TR 8363 |
Measurement of Liquid Flow in Open Channels - General Guidelines for the Selection of Method-Supersedes BS 3680: Part 3G: 1990; |
|
BSI BS MA 69 |
Ventilator Heads-Amd 1:June 30,1977 |
|
BSI CP 3000 |
Installation and Maintenance of Underfeed Stokers |
|
BSI DD CEN ISO/TS 15874-7 |
Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity |
|
BSI DD CEN ISO/TS 15877-7 |
Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 7: Guidance for the assessment of conformity |
|
BSI DD CLC/TS 50459-3 |
Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine Interface - Part 3: Ergonomic arrangements of ERTMS/GSM-R information-AMD 17161: May 31, 2007 |
|
BSI DD ENV 12299 |
Railway Applications - Ride Comfort for Passengers - Measurement and Evaluation |
|
BSI DD ISO/TS 10465-1 |
Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) - Part 1: Installation procedures |
|
BSI PD IEC/PAS 61162-101 |
Maritime navigation and radiocommunication equipment and systems Digital interfaces Part 101: Single talker and multiple listeners Modified sentences and requirements for IEC 61162-1 |
|
BSI BS 3101 |
Control and Interlock Circuits Primarily Associated with Flameproof Restrained Plugs and Sockets for Use in Coal Mines |
|
BSI BS 3403 |
Indicating tachometer and speedometer systems for industrial, railway and marine use |
|
BSI BS 3810 PART 7 |
Glossary of Terms Used in Materials Handling Part 7: Terms Used in Connection with Aerial Ropeways and Cableways |
|
BSI BS 3810 PART 9 |
Glossary of Terms Used in Materials Handling Part 9: Terms Used in Connection with Rail Transport |
|
BSI BS 4854 |
Cars for Manriding in Mines-Amd 1; |
|
BSI BS 5620 |
200 A 1100 V Flameproof Restrained and Bolted Plugs and Sockets for Use in Coal Mines (Q) |
|
BSI BS 5639 PART 1 |
Fork Arms for Fork Lift Trucks Part 1: Vocabulary for Hook-On Type Fork Arms |
|
BSI BS 5857 SEC 1.5 |
Measurement of Fluid Flow in Closed Conduits, Using Tracers Part 1: Measurement of Water Flow Section 1.5: Transit Time Method Using Radioactive Tracers |
|
BSI BS 5857 SEC 2.1 |
Measurement of Fluid Flow in Closed Conduits, Using Tracers Part 2: Measurement of Gas Flow Section 2.1: General |
|
BSI BS 5978-2 |
Safety and performance of gas-fired hot water boilers (60 kW to 2 MW input) Part 2: Specification for additional requirements for boilers with atmospheric burners |
|
BSI BS 6182 PART 3 |
Intrinsically Safe Power Supplies for Use in Coal Mines Part 3: Specification for Rechargeable Battery Units (AMD 6351) June 28, 1991-Amd 3; |
|
BSI BS 6202 |
Cleaning Equipment for Air or Other Gases |
|
BSI BS 6318 PART 3 |
Bucket Elevators Part 3: Dimensions of Deep Elevator Bucket with Flat Rear Wall |
|
BSI BS 6556-2 |
Low Speed Digital Signals for Use in Coal Mines - Part 2: Specification for Transformer Coupling-AMD 6205: February 1992; AMD 6903: April 1992; AMD 7935: November 1993 |
|
BSI BS 7383 |
Cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines (Q) |
|
BSI BS 7861 PART 1 |
Strata Reinforcement Support System Components Used in Coal Mines Part 1: Specification for Rockbolting-AMD 9912; March 15, 1998; |
|
BSI BS EN 12081 |
Railway Applications - Axleboxes - Lubricating Greases |
|
BSI BS EN 12111 |
Tunnelling machines Road headers, continuous miners and impact rippers Safety requirements-CORR 15830: March 2006 |
|
BSI BS EN 12639 |
Liquid pumps and pump units Noise test code Grade 2 and grade 3 of accuracy-CORR 13030:August 2001; CORR 15369:September 29, 2004 |
|
BSI BS EN 1267 |
Valves - Test of Flow Resistance Using Water as a Test Fluid |
|
BSI BS EN 12929-2 |
Safety requirements for cableway installations designed to carry persons General requirements Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
|
BSI BS EN 13129-2 |
Railway applications Air conditioning for main line rolling stock Part 2: Type tests |
|
BSI BS EN 13230-5 |
Railway applications Track Concrete sleepers and bearers Part 5: Special elements |
|
BSI BS EN 13232-7 |
Railway applications Track Switches and crossings Part 7: Crossings with moveable parts |
|
BSI BS EN 13698-1 |
Pallet production specification Part 1: Construction specification for 800 mm x 1200 mm flat wooden pallets |
|
BSI BS EN 13732 |
Food processing machinery Bulk milk coolers on farms Requirements for construction, performance, suitability for use, safety and hygiene |
|
BSI BS EN 13913 |
Railway applications Rubber suspension components Elastomer-based mechanical parts |
|
BSI BS EN 14750-1 |
Railway applications Air conditioning for urban and suburban rolling stock Part 1: Comfort parameters |
|
BSI BS EN 14865-2 |
Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h |
|
BSI BS EN 14893 |
LPG equipment and accessories Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
|
BSI BS EN 1726-2 |
Safety of Industrial Trucks - Self-Propelled Trucks Up to and Including 10 000 kg Capacity and Tractors with a Drawbar Pull Up to and Including 20 000 N - Part 2: Additional Requirements for Trucks with Elevating Operator Position and Trucks Specifically Designed to Travel with Elevated Loads |
|
BSI BS EN 29104 |
Measurement of Fluid Flow in Closed Conduits - Methods of Evaluating the Performance of Electromagnetic Flow-Meters for Liquids (ISO 9104: 1991) (AMD 7980) October 15, 1993 (Formerly BS 7526:19910 (Q)-Amd 1; |
|
BSI BS EN 50033 |
Construction and Testing of Miners' Caplamps in Relation to the Risk of Explosion, for Mines Susceptible to Firedamp (AMD 7877) July 15, 1993 (Q)-Amd 1; |
|
BSI BS EN 50239 |
Railway Applications - Radio Remote Control System of Traction Vehicle for Freight Traffic |
|
BSI BS EN 50306-2 |
Railway applications Railway rolling stock cables having special fire performance Thin wall Part 2: Single core cables |
|
BSI BS EN 60609-2 |
Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump turbines Part 2: Evaluation in Pelton turbines-CORR 9968: March 1998; AMD 15739: April 28, 2006 |
|
BSI BS EN 61069-4 |
Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment Part 4: Assessment of System Performance-IEC 61069-4: 1997; |
|
BSI BS EN 61298-1 |
Process Measurement and Control Devices - General Methods and Procedures for Evaluating Performance Part 1: General Considerations (IEC 1298-1: 1995) (Q) |
|
BSI BS EN 62219 |
Overhead electrical conductors Formed wire, concentric lay, stranded conductors |
|
BSI BS EN ISO 10133 |
Small Craft - Electrical Systems - Extra-Low-Voltage D.C. Installations-CORR 13652: January 16,2002; |
|
BSI BS EN ISO 11592 |
Small Craft Less Than 8 m Length of Hull - Determination of Maximum Propulsion Power Rating-CORR 13738: March 12, 2002; |
|
BSI BS EN ISO 11812 |
Small Craft - Watertight Cockpits and Quick-Draining Cockpits |
|
BSI BS EN ISO 12215-1 |
Small Craft - Hull Construction and Scantlings - Part 1: Materials: Thermosetting Resins, Glass-Fibre Reinforcement, Reference Laminate-CORR 13064: February 2001; |
|
BSI BS EN ISO 13297 |
Small Craft - Electrical Systems - Alternating Current Installations |
|
BSI BS EN ISO 15236-2 |
Steel cord conveyor belts Part 2: Preferred belt types |
|
BSI BS EN ISO 15748-2 |
Ships and marine technology Potable water supply on ships and marine structures Part 2: Method of calculation |
|
BSI BS EN ISO 16136 |
Industrial valves Butterfly valves of thermoplastics materials |
|
BSI BS EN ISO 21182 |
Light conveyor belts Determination of the coefficient of friction-Supersedes BS EN 1724:1999 |
|
BSI BS EN ISO 3715-2 |
Ships and marine technology Propulsion plants for ships Part 2: Vocabulary for controllable-pitch propeller plants-AMD 15200:June 22, 2004; Renumbers BS ISO 3715-2:2001 |
|
BSI BS EN ISO 613 |
Ships and Marine Technology - Magnetic Compasses, Binnacles and Azimuth Reading Devices - Class B-AMD 13480: 10/5/2001; Renumbers BS ISO 613:2000 |
|
BSI BS EN ISO 703-1 |
Conveyor Belts - Transverse Flexibility and Troughability - Part 1: Test Method-Supersedes BS 490-10.6:1983; |
|
BSI BS EN ISO 8099 |
Small craft - Toilet waste retention systems-Supersedes BS MA 101: 1986 |
|
BSI BS EN ISO 8385 |
Ships and Marine Technology - Dredgers - Classification-Supersedes BS 7466: 1991; |
|
BSI BS EN ISO 8665 |
Small craft Marine propulsion reciprocating internal combustion engines Power measurements and declarations |
|
BSI BS ISO 12743 |
Copper, lead, zinc and nickel concentrates - Sampling procedures for determination of metal and moisture content |
|
BSI BS ISO 13312 |
Iron ores Determination of potassium Flame atomic absorption spectrometric method |
|
BSI BS ISO 15217 |
Fluid Power Systems and Components - 16mm Square Electrical Connector with Earth Contact - Characteristics and Requirements |
|
BSI BS ISO 4250-1 |
Earth-mover tyres and rims Part 1: Tyre designation and dimensions-: 1991 |
|
BSI BS ISO 6980-2 |
Nuclear energy Reference beta-particle radiation Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field-Together with BS ISO 6980-1 and BS ISO 6980-3 Partially Supersedes BS ISO 6980:1996 |
|
BSI BS ISO 8133 |
Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) compact series Mounting dimensions for accessories-Supersedes BS ISO 6982:1992 and BS ISO 8138:1998 |
|
BSI BS ISO 8858-3 |
Hard coal Froth flotation testing Part 3: Release evaluation |
|
BSI BS ISO/TR 15069 |
Series 1 Freight Containers - Handling and Securing - Rationale for ISO 3874 Annex A |
|
BSI BS MA 2 PART 8 |
Magnetic Compasses and Binnacles Part 8: Transmitting Systems and Off-Course Alarms for Class A Magnetic Compasses |
|
BSI BS MA 87 PART 3 |
Main Dimensions of Shipborne Barges Part 3: The Arrangement, Dimensions and Method of Test for Lifting Post Castings |
|
BSI DD CEN/TS 13547 |
Industrial valves - Copper alloy ball valves |
|
BSI DD CLC/TS 50459-1 |
Railway applications Communication, signalling and processing systems European Rail Traffic Management System Driver-Machine Interface Part 1: Ergonomic principles for the presentation of ERTMS/ETCS/GSM-R information |
|
BSI DD CLC/TS 50459-6 |
Railway applications Communication, signalling and processing systems European Rail Traffic Management System Driver-Machine Interface Part 6: Audible information |
|
BSI DD ENV 50152-3-1 |
Railway Applications - Fixed Installations - Particular Requirements for a.c. Switchgear - Part 3: Measurement, Control and Protection Devices for Specific Use in a.c. Traction Systems - Section 1: Application Guide |
|
BSI BS 1113 ENQ CASE 11 |
Combination of Calculation Pressure and Design Temperature (Q) |
|
BSI BS 3289 |
Textile carcass conveyor belting for use in underground mines (including fire performance) Specification-Partially Superseded by BS EN 14973:2006 |
|
BSI BS 3553 |
Graphical Symbols for Coal Preparation Plant Flowsheets (Q) |
|
BSI BS 3876 PART 2 |
Rope Rollers and Mountings for Colliery Track Haulage Part 2: Vertical Spindle Pulleys, Mountings and Assemblies |
|
BSI BS 4521 SEC 3.1 |
Railway Turnouts for Private Users Part 3: Medium Grade Turnouts over Which British Railways Locomotives Do Not Operate, for Axle Loads Not Exceeding 25 Tons Section 3.1: Turnouts Using Bull Head Rail |
|
BSI BS 4831 |
Shackle Type Connector Units for Chain Conveyors for Mining |
|
BSI BS 490 SEC 10.7 |
Conveyor and Elevator Belting Part 10: Testing for Physical Properties Section 10.7: Method for Determination of Length of an Endless Belt |
|
BSI BS 5892-5 |
Railway rolling stock material (metric) - Part 5: Specification for steel bars for retaining rings for tyred wheels-AMD 16889: May 31, 2007 |
|
BSI BS 6182-2 |
Intrinsically safe power supplies for use in coal mines - Part 2: Specification for a.c. power supplies-AMD 4784: February 1985 |
|
BSI BS 6318 PART 2 |
Bucket Elevators Part 2: Dimensions of Vertical Bucket Elevators with Calibrated Round Steel Link Chains |
|
BSI BS 6592 |
Drive Sprocket Assemblies for Chain Conveyors for Mining |
|
BSI BS 6956 PART 1 |
Jointing Materials and Compounds Part 1: Corrugated Metal Joint Rings |
|
BSI BS 6999 |
Vitreous-Enamelled Low-Carbon-Steel Fluepipes, Other Components and Accessories for Solid- Fuel-Burning Appliances with a Maximum Rated Output of 45 kW (AMD 8949) December 15, 1995 (Q)-Amd 1; |
|
BSI BS 714 |
Cartridge Fuse-Links for Use in Railway Signalling Circuits-Amd 1; |
|
BSI BS 7160 |
Anchor Chains for Small Craft |
|
BSI BS 7300 |
Code of Practice for Safeguarding of the Hazard Points on Troughed Belt Conveyors |
|
BSI BS 7464 |
Anchor Winches for Mobile Offshore Units (ISO 9089: 1989) |
|
BSI BS 7623 |
Electrical and Pneumatic Analogue Chart Recorders for Use in Industrial-Process Control Systems, Guidance for Inspection and Routine Testing (IEC 1153: 1992) (Read in Conjunction with BS 4671) |
|
BSI BS 7714 |
Care and handling of seals for fluid power applications Guide |
|
BSI BS 7929 |
Guide for the Verification of a Pump Casing Design Procedure |
|
BSI BS 8407 |
Mechanical and Spliced Joints in Conveyor Belting for Use Underground |
|
BSI BS EN 1265 |
Noise Test Code for Foundry Machines and Equipment |
|
BSI BS EN 13230-2 |
Railway applications Track Concrete sleepers and bearers Part 2: Prestressed monoblock sleepers |
|
BSI BS EN 13298 |
Railway applications Suspension components Helical suspension springs, steel |
|
BSI BS EN 13485 |
Thermometers for Measuring the Air and Product Temperature for the Transport, Storage and Distribution of Chilled, Frozen, Deep-Frozen/Quick-Frozen Food and Ice Cream - Tests, Performance, Suitability |
|
BSI BS EN 13922 |
Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels |
|
BSI BS EN 13977 |
Railway applications Track Safety requirements for portable machines and trolleys for construction and maintenance |
|
BSI BS EN 14067-3 |
Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels |
|
BSI BS EN 14067-4 |
Railway applications Aerodynamics Part 4: Requirements and test procedures for aerodynamics on open track |
|
BSI BS EN 14145 |
Holders for lifebuoys |
|
BSI BS EN 14398-1 |
Cryogenic vessels Large transportable non-vacuum insulated vessels Part 1: Fundamental requirements |
|
BSI BS EN 14409-3 |
Plastics piping systems for renovation of underground water supply networks Part 3: Lining with close-fit pipes |
|
BSI BS EN 14730-2 |
Railway applications Track Aluminothermic welding of rails Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds |
|
BSI BS EN 14901 |
Ductile iron pipes, fittings and accessories Epoxy coating (heavy duty) of ductile iron fittings and accessories Requirements and test methods |
|
BSI BS EN 14983 |
Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage |
|
BSI BS EN 1525 |
Safety of Industrial Trucks - Driverless Trucks and Their Systems-AMD 10409; January 15, 1999; |
|
BSI BS EN 15380-1 |
Railway applications Designation system for railway vehicles Part 1: General principles |
|
BSI BS EN 1909 |
Safety requirements for cableway installations designed to carry persons Recovery and evacuation |
|
BSI BS EN 27841 |
Methods for Determination of Steam Loss of Automatic Steam Traps (ISO 7841: 1988) |
|
BSI BS EN 50318 |
Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line |
|
BSI BS EN 61395 |
Overhead Electrical Conductors - Creep Test Procedures for Stranded Conductors-IEC 61395: 1998; |
|
BSI BS EN 61702 |
Rating of Direct Coupled Photovoltaic (PV) Pumping Systems-IEC 61702:1995; |
|
BSI BS EN 61924 |
Maritime navigation and radiocommunication equipment and systems Integrated navigation systems Operational and performance requirements, methods of testing and required test results-IEC 61924:2006 |
|
BSI BS EN ISO 11114-4 |
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement |
|
BSI BS EN ISO 12216 |
Small Craft Windows, Portlights, Hatches, Deadlights and Doors Strength and Watertightness Requirements |
|
BSI BS EN ISO 13590 |
Small craft Personal watercraft Construction and system installation requirements-Corrigendum 15774: December 14, 2005 |
|
BSI BS EN ISO 15083 |
Small craft Bilge-pumping systems-CORR 14449: April 9, 2003; |
|
BSI BS EN ISO 15748-1 |
Ships and marine technology Potable water supply on ships and marine structures Part 1: Planning and design |
|
BSI BS EN ISO 21181 |
Light conveyor belts Determination of the relaxed elastic modulus-Supersedes BS EN 1723:2000 |
|
BSI BS EN ISO 3449 |
Earth-moving machinery Fallingobject protective structures Laboratory tests and performance requirements-:2000 |
|
BSI BS EN ISO 4566 |
Small Craft with Inboard Engine - Propeller Shaft Ends and Bosses with 1:10 Taper (Q) |
|
BSI BS EN ISO 6185-1 |
Inflatable Boats - Part 1: Boats with a Maximum Motor Power Rating of 4,5 kW-CORR 13889: April 25, 2002; Together with BS EN ISO 6185-2: 2001 and BS EN ISO 6185-3: 2001, Supersedes BS MA 16: 1971; |
|
BSI BS EN ISO 9097 |
Small Craft - Electric Fans-AMD 12071:May 2001; |
|
BSI BS EN ISO 9409-1 |
Manipulating Industrial robots - Mechanical Interfaces Part 1: Plates |
|
BSI BS EN ISO 9409-2 |
Manipulating industrial robots Mechanical interfaces Part 2: Shafts |
|
BSI BS IEC/TR 61838 |
Nuclear Power Plants - Use of Probabilistic Safety Assessment for the Classification of Instrumentation and Control Functions |
|
BSI BS ISO 10766 |
Hydraulic fluid power Cylinders Housing dimensions for rectangular-section-cut bearing rings for pistons and rods |
|
BSI BS ISO 1100-2 |
Measurement of Liquid Flow in Open Channels - Part 2: Determination of the Stage-Discharge Relation-Supersedes BS 3680-3C: 1983; |
|
BSI BS ISO 12739 |
Zinc sulfide concentrates Determination of zinc Ion-exchange/EDTA titrimetric method |
|
BSI BS ISO 13359 |
Mesurement of Conductive Liquid Flow in Closed Conduits - Flanged Electromagnetic Flowmeters - Overall Length |
|
BSI BS ISO 13592 |
Small Craft - Backfire Flame Control for Petrol Engines |
|
BSI BS ISO 13950 |
Plastics pipes and fittings - Automatic recognition systems for electrofusion joints |
|
BSI BS ISO 14139 |
Hydrometric Determinations - Flow Measurements in Open Channels Using Structures - Compound Gauging Structures-Supersedes BS 3680-4D: 1989; |
|
BSI BS ISO 14397-2 |
Earth-Moving Machinery Loaders and Backhoe Loaders Part 2: Test Method for Measuring Breakout Forces and Lift Capacity to Maximum Lift Height-Also Known as BS 6911-15.2: 2002 |
|
BSI BS ISO 15372 |
Ships and marine technology Inflatable rescue boats Coated fabrics for inflatable chambers |
|
BSI BS ISO 15817 |
Earth-moving machinery Safety requirements for remote operator control |
|
BSI BS ISO 17899 |
Ships and marine technology Marine electric window wipers |
|
BSI BS ISO 19078 |
Gas cylinders - Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
|
BSI BS ISO 20401 |
Pneumatic fluid power systems Directional control valves Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm |
|
BSI BS ISO 24408 |
Ships and marine technology Position-indicating lights for life-saving appliances Testing, inspection and marking of production units |
|
BSI BS ISO 251 |
Conveyor belts with textile carcass Widths and lengths-Partially Supersedes BS 490-1:1990 and BS 490-2:1975; |
|
BSI BS ISO 5131 |
Acoustics - Tractors and Machinery for Agriculture and Forestry - Measurement of Noise at the Operator's Position - Survey Method |
|
BSI BS ISO 6022 |
Hydraulic fluid power Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
|
BSI BS ISO 8131 |
Hydraulic Fluid Power - Single Rod Cylinders, 16 MPa (160 Bar) Compact Series - Tolerances (Q) |
|
BSI BS ISO 9650-3 |
Small craft Inflatable liferafts Part 3: Material |
|
BSI BS ISO/TR 13739 |
Petroleum Products - Methods of Specifying Practical Procedures for the Transfer of Bunker Fuels to Ships-ISO/TR 13739:1998; |
|
BSI BS MA 105 PART 1 |
Shipborne Barges Part 1: Main Dimensions-ISO 6765:1985; |
|
BSI DD CLC/TS 50459-4 |
Railway applications Communication, signalling and processing systems European Rail Traffic Management System Driver-Machine Interface Part 4: Data entry for the ERTMS/ETCS/GSM-R systems |
|
BSI BS 2790 CASE 15 |
Design and Manufacture of Shell Boilers of Welded Construction Enquiry Cases: Enquiry Case 15: Allowable Stresses in Shells Under Hydraulic Test Conditions at Boiler Supports |
|
BSI BS 2790 CASE 26 |
Design and Manufacture of Shell Boilers of Welded Construction Enquiry Cases: Case 26: Incorporation of Design Temperature in Boiler Marking |
|
BSI BS 3323 |
Glossary of Terms of Relating to Sampling, Testing and Analysis of Solid Mineral Fuels (ISO 1213-2: 1992) (Q) |
|
BSI BS 3618 SEC 7 |
Glossary of Mining Terms Section 7: Electrical Engineering and Lighting |
|
BSI BS 3876 PART 5 |
Rope Rollers and Mountings for Colliery Track Haulage Part 5: Suspended Pulley Assemblies and Clamps |
|
BSI BS 5978-3 |
Safety and performance of gas-fired hot water boilers (60 kW to 2 MW input) Part 3: Specification for additional requirements for boilers with forced or induced draught burners |
|
BSI BS 6078 |
Application of Digital Computers to Nuclear Reactor Instrumentation and Control |
|
BSI BS 6837 |
Plan Dimensions of Rigid Rectangular Transport Packages with a Modular Relationship to 1200mm x 1000mm and 1200mm x 800mm Pallets and Unit Loads |
|
BSI BS 7161 |
Propeller Shaft Ends and Bosses for Inboard- Engined Pleasure Craft |
|
BSI BS 7162 |
Waste Water Fittings on Yachts-Replaces BS MA 84: 1978; |
|
BSI BS 7550 PART 1 |
Calibration of Spherical Tanks for Refrigerated Light-Hydrocarbon Fluids in Ships Part 1: Method of Stereo-Photogrammetry (ISO 9091-1: 1991) |
|
BSI BS 7865 |
Steel Electrical Conductor Rail for Railway Motive Power Supply-AMD 9686; December 15, 1997; |