|
BSI BS EN 2536 |
Hard Anodizing of Aluminium Alloys (V) |
|
BSI BS EN 622-3 |
Fibreboards Specifications Part 3: Requirements for medium boards |
|
BSI BS EN 717-1 |
Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method-Supersedes DD ENV 717-1:1999 |
|
BSI BS EN ISO 1043-4 |
Plastics - Symbols and Abbreviated Terms - Part 4: Flame Retardants |
|
BSI BS EN ISO 12737 |
Metallic materials Determination of plane-strain fracture toughness |
|
BSI BS EN ISO 4589-2 |
Plastics - Determination of Burning Behaviour by Oxygen Index - Part 2: Ambient-Temperature Test-AMD 10627: October 1999; AMD 16415: September 2006; Renumbers BS ISO 4589-2: 1996 |
|
BSI BS EN ISO 643 |
Steels - Micrographic determination of the apparent grain size-Supersedes BS 4490: 1989; |
|
BSI BS EN ISO 7539-5 |
Corrosion of Metals and Alloys - Stress Corrosion Testing Part 5: Preparation and Use of C-Ring Specimens-AMD 8716: October 1995; Formerly BS 6980: Part 5: 1990 |
|
BSI BS ISO 23529 |
Rubber General procedures for preparing and conditioning test pieces for physical test methods-CORR 15604: March 22, 2005; Supersedes BS 903-A32:1988, BS 903-A35:1995, BS 903-A36:1995 and BS 903-A38:1991 |
|
BSI BS 131-4 |
Methods for Notched Bar Tests Part 4: Calibration of Izod Pendulum Impact Testing Machines for Metals-AMD 7768; August 15, 1993; Partially Replaced by BS EN 10045-2: 1993; |
|
BSI BS EN 10291 |
Metallic Materials - Uniaxial Creep Testing in Tension - Methods of Test-Supersedes BS 3500 Parts 1, 3 and 5: 1969; |
|
BSI BS EN ISO 9445 |
Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths Tolerances on dimensions and form-Supersedes BS EN 10258:1997 and BS EN 10259:1997 |
|
BSI BS EN ISO 9513 |
Metallic materials - Calibration of extensometers used in uniaxial testing-Supersedes BS EN 10002-4: 1995; |
|
BSI BS 115 |
Metallic Resistance Materials for Electrical Purposes-AMD 8751: March 15, 1995; |
|
BSI BS 131-7 |
Notched Bar Tests - Part 7: Specification for Verification of the Test Machine Used for Precision Determination of Charpy V-Notch Impact Energies for Metals |
|
BSI BS EN 10048 |
Hot Rolled Narrow Steel Strip - Tolerances on Dimensions and Shape-AMD 10010; June 1998; Supersedes BS 1449: Section 1.12: 1991; |
|
BSI BS EN ISO 306 |
Plastics Thermoplastic materials Determination of Vicat softening temperature (VST) |
|
BSI BS ISO 2878 |
Rubber Antistatic and conductive products Determination of electrical resistance-Partially Supersedes BS 2050:1978 |
|
BSI BS ISO 7539-8 |
Corrosion of Metals and Alloys - Stress Corrosion Testing Part 8: Preparation and Use of Specimens to Evaluate Weldments |
|
BSI BS 3396 PART 1 |
Woven Glass Fibre Fabrics for Plastics Reinforcement Part 1: Specification for Loom-State Fabrics |
|
BSI BS 3757 |
Specification for Rigid PVC sheet-AMD 6291: July, 1990 |
|
BSI BS 3900-E8 |
Methods of Test for Paints Part E8: Resistance to impact (pendulum test)-AMD 6908: February 1992; |
|
BSI BS 903 PART A9 |
Methods of Testing Vulcanized Rubber Part A9: Determination of Abrasion Resistance |
|
BSI BS EN 1122 |
Plastics - Determination of Cadmium - Wet Decomposition Method-Supersedes DD ENV 1122:1995; |
|
BSI BS EN 12420 |
Copper and Copper Alloys - Forgings-Supersedes BS 3885: 1965 and Together with BS EN 12165: 1998, it Supersedes BS 2872: 1989; |
|
BSI BS EN 1811 |
Reference Test Method for Release of Nickel from Products Intended to Come into Direct and Prolonged Contact with the Skin |
|
BSI BS EN 438-5 |
High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (Usually called Laminates) Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates-Together with BS EN 438-1 thru -4, -6 and -7 Supersedes BS EN 438-1: 1991 and BS EN 438-2: 1991 |
|
BSI BS EN 10202 |
Cold reduced tinmill products Electrolytic tinplate and electrolytic chromium/ chromium oxide coated steel-CORR 14845: December 19, 2003; Supersedes BS EN 10203:1991; |
|
BSI BS EN 12209 |
Building hardware Locks and latches Mechanically operated locks, latches and locking plates Requirements and test methods-CORR 16436: September, 2006;: 1980 |
|
BSI BS EN ISO 11126-7 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specification for Non-Metallic Blast-Cleaning Abrasives Part 7: Fused Aluminium Oxide-CORR 10555: March 2000; AMD 10699: February 2001; Renumbers BS 7079-F7: 1996 |
|
BSI BS EN ISO 7539-3 |
Corrosion of Metals and Alloys - Stress Corrosion Testing Part 3: Preparation and Use of U-Bend Specimens-AMD 8712 October 1994; Formerly BS 6980: Part 3: 1990 |
|
BSI BS 2782-6 METH 620A TO D |
Methods of testing Plastics Part 6: Dimensional properties Methods 620A to 620D: Determination of density and relative density of non-cellular plastics-AMD 14474: September 26, 2003; Renumbers BS 2782-6: METH 620C&620D; Partially Superseded By BS EN ISO 1183-1:2004; Partially superseded by BS EN ISO 1183-2:2004 |
|
BSI BS 903 PART C1 |
Methods of Testing Vulcanized Rubber Part C1: Determination of Surface Resistivity-Also Known as BS 2782-2: METH 231A:1991 |
|
BSI BS EN 10107 |
Grain-Oriented Electrical Steel Sheet and Strip Delivered in the Fully Processed State |
|
BSI BS EN 10132-1 |
Cold Rolled Narrow Steel Strip for Heat Treatment - Technical Delivery Conditions - Part 1: General-Together with BS EN 10132-2: 2000 and BS EN 10132-3: 2000, it Superseded BS 1449.1.15: 1991; Together with BS EN 10132-4: 2000, it Supersedes BS 5770: Parts 1, 2 and 3: 1981; |
|
BSI BS EN 10302 |
Creep Resisting Steels, Nickel and Cobalt Alloys |
|
BSI BS EN 12697-11 |
Bituminous mixtures  Test methods for hot mix asphalt  Part 11: Determination of the affinity between aggregate and bitumen-CORR 17050: April 30, 2007 |
|
BSI BS EN 338 |
Structural timber Strength classes |
|
BSI BS EN 546-2 |
Aluminium and aluminium alloys  Foil  Part 2: Mechanical properties |
|
BSI BS EN 622-1 |
Fibreboards Specifications Part 1: General requirements |
|
BSI BS EN 754-7 |
Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube - Part 7: Seamless Tubes, Tolerances on Dimensions and Form-Supersedes BS 1471: 1972; |
|
BSI BS EN ISO 11126-8 |
Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 8: Olivine sand-AMD 9845: February 1998; Renumbers BS 7079-F8: 1994; |
|
BSI BS EN ISO 2566-1 |
Steel - Conversion of Elongation Values - Part 1: Carbon and Low Alloy Steels-Supersedes BS 3894-1:1965; |
|
BSI BS EN ISO 293 |
Plastics Compression moulding of test specimens of thermoplastic materials |
|
BSI BS EN ISO 4589-3 |
Plastics - Determination of Burning Behaviour by Oxygen Index Part 3: Elevated-Temperature Test-Annex A of BS EN ISO 4589-3: 1996 Supersedes BS 2782: Part 1: Methods 143A and 143B: 1989; |
|
BSI BS ISO 3116 |
Magnesium and magnesium alloys  Wrought magnesium alloys |
|
BSI BS 2782-1:METHOD 131B |
Methods of Testing Plastics - Part 1: Thermal Properties - Method 131B: Determination of Extensibility After Heat Ageing of Flexible Polyvinyl Chloride Sheet |
|
BSI BS 2782PT10: METH 1003 |
Methods of Testing Plastics Part 10: Glass Reinforced Plastics Method 1003: Determination of Tensile Properties |
|
BSI BS 405 |
Uncoated Expanded Metal Carbon Steel Sheets for General Purposes (AMD 6660) January 31, 1991-Amd 1; |
|
BSI BS 7164 SEC 22.1 |
Chemical Tests for Raw and Vulcanized Rubber Part 22: Determination of Chlorine Content Section 22.1: Parr Bomb Method (V) |
|
BSI BS 903 PART C2 |
Methods of Testing Vulcanized Rubber Part C2: Determination of Volume Resistivity (Incorporating BS 2782: Part 2: Method 230A)-Amd 1; |
|
BSI BS EN 10149-1 |
Specification for Hot-rolled flat products made of high yield strength steels for cold forming Part 1: General delivery conditions |
|
BSI BS EN 10270-2 |
Steel Wire for Mechanical Springs - Part 2: Oil Hardened and Tempered Spring Steel Wire-Supersedes BS 2803:1980; |
|
BSI BS EN 10328 |
Iron and steel Determination of the conventional depth of hardening after surface heating-Supersedes BS 6481:1984 |
|
BSI BS EN 1782 |
Corr.1 Tracheal Tubes and Connectors-CORR 10173; September 15, 1998; Supersedes BS 3487-1:1989,BS 3487-2:1993,BS 3487-3:1986,BS 3487-5:1986,and BS 6546:1994; |
|
BSI BS EN 314-1 |
Plywood - Bonding Quality Part 1: Test Methods |
|
BSI BS EN 717-2 |
Wood-based panels Determination of formaldehyde release Part 2: Formaldehyde release by the gas analysis method-CORR 14072: December 9, 2002; |
|
BSI BS EN ISO 11126-6 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast Cleaning Abrasives Part 6: Iron Furnace Slag-AMD 9844; February 1998; Renumbers BS 7079: Part F6: 1994 |
|
BSI BS EN ISO 15493 |
Plastics piping systems for industrial applications Acrylonitrile- butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system Metric series |
|
BSI BS EN ISO 179-1 |
Plastics - Determination of Charpy Impact Properties - Part 1: Non-Instrumented Impact Test-AMD 16076: March 31, 2006 |
|
BSI BS 1155 |
Natural rubber compounds for extrusion - Specification |
|
BSI BS 2782PT1: METH 140A |
Methods of Testing Plastics Part 1: Thermal Properties Method 140A: Determination of the Burning Behaviour of Horizontal and Vertical Specimens in Contact with a Small-Flame Ignition Source (ISO 1210: 1992) |
|
BSI BS 7372 PART 1 |
Guide to Choice of Aperture Size and Wire Diameter Combinations for Industrial Wire Screens and Woven Wire Cloth Part 1: General (ISO 4783-1: 1989) |
|
BSI BS 903-3 |
Physical testing of rubber Part 3: Acquisition and presentation of comparable single-point data-AMD 15154:October 4, 2004 |
|
BSI BS EN 10169-1 |
Continuously Organic Coated (Coil Coated) Steel Flat Products - Part 1: General Information (Definitions, Materials, Tolerances, Test Methods) |
|
BSI BS EN 10244-1 |
Steel Wire and Wire Products - Non-Ferrous Metallic Coatings on Steel Wire - Part 1: General Principles-CORR 13235: September 17, 2001; |
|
BSI BS EN 10314 |
Method for the derivation of minimum values of proof strength of steel at elevated temperatures-Supersedes BS 3920-1:1973, BS 3920-2:1986, DD ENV 22605-1:1992, DD ENV 22605-2:1992 and DD ENV 22605-3:1992 |
|
BSI BS EN 1371-1 |
Founding - Liquid Penetrant Inspection Part 1: Sand, Gravity Die and Low Pressure Die Castings-Supersedes BS 4080: Part 2: 1989; |
|
BSI BS EN 1371-2 |
Founding - Liquid Penetrant Inspection - Part 2: Investment Castings |
|
BSI BS EN 1449 |
Plastics Piping Systems - Glass Reinforced Thermosetting Plastics (GRP) Components - Test Methods to Prove the Design of Cemented Socket-and-Spigot Joints-Also Known as BS 2782: Part 12: Method 1224C: 1997; |
|
BSI BS EN 942 |
Timber in joinery  General requirements |
|
BSI BS EN ISO 11126-5 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast Cleaning Abrasives Part 5: Nickel Refrinery Slag-AMD 10089: August 15, 1998; Renumbers BS 7079 Part F5:1994 |
|
BSI BS EN ISO 11127-7 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non-Metallic Blast-Cleaning Abrasives Part 7: Determination of Water-Soluble Chlorides-AMD 9852: February 1998; Renumbers BS 7079 Part F17:1994 |
|
BSI BS EN ISO 14130 |
Fibre-reinforced plastic composites Determination of apparent interlaminar shear strength by short-beam method-CORR 15091: May 7, 2004 |
|
BSI BS EN ISO 3146 |
Plastics - Determination of Melting Behaviour (Melting Temperature or Melting Range) of Semi-Crystalline Polymers by Capillary Tube and Polarizing-Microscope Methods-CORR 14301: March 21, 2003; |
|
BSI BS EN ISO 6506-3 |
Metallic Materials - Brinell Hardness Test - Part 3: Calibration of Reference Blocks |
|
BSI BS ISO 11357-6 |
Plastics - Differential Scanning Calorimetry (DSC) - Part 6: Determination of Oxidation Induction Time |
|
BSI BS 3332 |
White Metal Bearing Alloy Ingots |
|
BSI BS 903 PART A21:SEC 21.1 |
Physical Testing of Rubber Part A21: Determination of Rubber to Metal Bond Strength Section 21.1: Adhesion to Rigid Substrates - 90 Degrees Peel Method-Together with BS 903: Part A21: Section 21.2: 1997, This Document Supersedes BS 903: Part A21: 1989; ISO 813: 1997; |
|
BSI BS EN 13411-5 |
Terminations for steel wire ropes Safety Part 5: U-bolt wire rope grips |
|
BSI BS EN 13602 |
Copper and Copper Alloys Drawn, Round Copper Wire for the Manufacture of Electrical Conductors-Supersedes BS 4109: 1970; |
|
BSI BS EN 50357 |
Evaluation of Human Exposure to Electromagnetic Fields from Devices Used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and Simliar Applications |
|
BSI BS EN ISO 2398 |
Rubber Hose, Textile-Reinforced, for Compressed Air - Specification-AMD 9704: December 1997; Renumbers BS ISO 2398: 1995 |
|
BSI BS EN ISO 291 |
Plastics - Standard Atmospheres for Conditioning and Testing |
|
BSI BS ISO 3977-2 |
Gas turbines Procurement Part 2: Standard reference conditions and ratings |
|
BSI BS 1591 |
Corrosion resisting high silicon iron castings-AMD 8636: September 1995; |
|
BSI BS 183 |
General purpose galvanized steel wire strand-AMD 6535: September 1991; Supersedes BS 163: Part 1: 1943 and BS 182 to 184: 1938; |
|
BSI BS 3837-1 |
Expanded Polystyrene Boards Part 1: Boards Manufactured from Expandable Beads Requirements and test methods |
|
BSI BS 4370-1 |
Methods of test for Rigid cellular materials Part 1: Methods 1 to 5-AMD 8868: December, 1995; AMD 10082: August, 1998 |
|
BSI BS EN 10305-6 |
Steel tubes for precision applications Technical delivery conditions Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems-Supersedes BS 6323-6: 1982 |
|
BSI BS EN 1459 |
Safety of Industrial Trucks - Self-Propelled Variable Reach Trucks-AMD 16765: November 30, 2006 |
|
BSI BS EN 622-5 |
Fibreboards - Specifications - Part 5: Requirements for Dry Process Boards (MDF) |
|
BSI BS EN ISO 945 |
Cast Iron - Designation of Microstructure of Graphite (V) |
|
BSI BS 131-5 |
Methods for Notched Bar Tests Part 5: Determination of Crystallinity |
|
BSI BS 2782-5 METH 552A |
Methods of Testing Plastics - Optical and Colour Properties, Weathering - Determination of Changes in Colour Variations in Properties After Exposure to Daylight under Glass, Natural Weathering or Artificial Light Sources-ISO 4582: 1998; |
|
BSI BS 373 |
Testing Small Clear Specimens of Timber |
|
BSI BS 5176 |
Classification system for vulcanized rubbers Specification |
|
BSI BS EN 10300 |
Steel tubes and fittings for onshore and offshore pipelines Bituminous hot applied materials for external coating-EN 10300:2005; Supersedes BS 4147:1980 |
|
BSI BS EN 335-1 |
Durability of wood and wood-based products Definitions of use classes Part 1: General |
|
BSI BS EN ISO 15630-2 |
Steel for the Reinforcement and Prestressing of Concrete - Test Methods - Part 2: Welded Fabric-CORR 13973: June 18, 2002 |
|
BSI BS EN ISO 1872-1 |
Plastics - Polyethylene (PE) Moulding and Extrusion Materials Part 1: Designation System and Basis for Specifications-AMD 10640: 11/1999; Renumbers BS ISO 1872-1:1993 |
|
BSI BS EN ISO 1873-2 |
Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties-AMD 12039:June 2001; |
|
BSI BS EN ISO 4892-3 |
Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps |
|
BSI BS ISO 11357-7 |
Plastics Differential scanning calorimetry (DSC) Part 7: Determination of crystallization kinetics |
|
BSI BS 2782-1:METHOD 134A-B |
Methods of Testing Plastics - Part 1: Thermal Properties - Methods 134A and 134B. Determination of the Oxidation Induction Time of Thermoplastics |
|
BSI BS 3083 |
Hot-Dip Zinc Coated and Hot-Dip Aluminium/Zinc Coated Corrugated Steel Sheets for General Purposes (AMD 8761) November 15, 1995 (V)-Amd 2; |
|
BSI BS EN 10207 |
Steels for simple pressure vessels Technical delivery requirements for plates, strips and bars |
|
BSI BS EN 10264-1 |
Steel Wire and Wire Products - Steel Wire for Ropes - Part 1: General Requirements-Together with BS EN 10264-2: 2002 and BS EN 10264-3 it Supersedes BS 2763: 1982, Which Will Be Withdrawn When BS EN 10264-3 is Published; |
|
BSI BS EN 10264-3 |
Steel wire and wire products Steel wire for ropes Part 3: Round and shaped non alloyed steel wire for high duty applications-Together with BS EN 10264-1:2002 and BS EN 10264-2:2002 it Supersedes BS 2763:1982; |
|
BSI BS EN 13927 |
Non-destructive testing Visual testing Equipment |
|
BSI BS EN ISO 2639 |
Steels Determination and verification of the depth of carburized and hardened cases-CORR 14310: January 22, 2003; Supersedes BS 6479: 1984; |
|
BSI BS ISO 11357-4 |
Plastics Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity |
|
BSI BS ISO 12108 |
Metallic materials Fatigue testing Fatigue crack growth method-Supersedes DD 186:1991 and BS 6835-1:1998; |
|
BSI BS ISO 844 |
Rigid cellular plastics - Determination of compression properties |
|
BSI BS EN 10209 |
Cold-rolled low carbon steel flat products for vitreous enamelling Technical delivery conditions |
|
BSI BS EN 10248-1 |
Hot Rolled Sheet Piling of Non Alloy Steels Part 1: Technical Delivery Conditions (V) |
|
BSI BS EN 10292 |
Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming  Technical delivery conditions |
|
BSI BS EN 438-3 |
High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (Usually called laminates) Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates-Together with BS EN 438 Parts 1, 2 and 4 thru 7 supersedes BS EN 438-1:1991 and BS EN 438-2:1991 |
|
BSI BS EN ISO 11469 |
Plastics - Generic Identification and Marking of Plastics Products-Supersedes BS 7746: 1994; |
|
BSI BS EN ISO 8492 |
Metallic materials Tube Flattening test-Supersedes BS EN 10233:1994 |
|
BSI BS 2782-1:METHOD 150C |
Methods of Testing Plastics - Part 1: Thermal Properties - Method 150C: Determination of Low Temperature Extensibility of Flexible Polyvinyl Chloride Sheet |
|
BSI BS 3532 |
Method of Specifying Unsaturated Polyester Resin Systems (AMD 7344) November 15, 1992-Amd 1; |
|
BSI BS 903-4 |
Physical testing of rubber Part 4: Acquisition and presentation of comparable multi-point data |
|
BSI BS EN 10059 |
Hot rolled square steel bars for general purposes Dimensions and tolerances on shape and dimensions |
|
BSI BS EN 10169-2 |
Continuously organic coated (coil coated) steel flat products Part 2: Products for building exterior applications-:1999 |
|
BSI BS EN 10319-2 |
Metallic materials Tensile stress relaxation testing Part 2: Procedure for bolted joint models |
|
BSI BS EN 1301-1 |
Aluminium and Aluminium Alloys - Drawn Wire Part 1: Technical Conditions for Inspection and Delivery-Together with BS EN 1301-2 and BS EN 1301-3, This Document Supersedes BS 1475: 1972; |
|
BSI BS EN 586-2 |
Aluminium and Aluminium Alloys - Forgings Part 2: Mechanical Properties and Additional Property Requirements (V) |
|
BSI BS EN 623-1 |
Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties Part 1: Determination of the Presence of Defects by Dye Penetration |
|
BSI BS EN ISO 2039-1 |
Plastics Determination of hardness Part 1: Ball indentation method-CORR 14433:April 3, 2003; |
|
BSI BS EN ISO 604 |
Plastics Determination of compressive properties |
|
BSI BS IEC 60404-1 |
Magnetic Materials - Part 1: Classification |
|
BSI BS ISO 13586 |
Plastics - Determination of Fracture Toughness (GIC and KIC) - Linear Elastic Fracture Mechanics (LEFM) Approach-AMD 14738: December 10, 2003 |
|
BSI BS ISO 7539-9 |
Corrosion of metals and alloys Stress corrosion testing Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement |
|
BSI BS 2782:PT 3:METHOD 341A |
Methods of Testing Plastics Part 3. Mechanical Properties Method 341A. Determination of Apparent Interlaminar Shear Strength of Reinforced Plastics |
|
BSI BS 3127 |
Ferrous and Non-Ferrous Bourdon Tubing-Amd 1; |
|
BSI BS 3227 |
Butyl rubber compounds (including halobutyl compounds) Specification |
|
BSI BS 3379 |
Combustion modified flexible polyurethane cellular materials for loadbearing applications - Specification-CORR 16373: July 2006 |
|
BSI BS EN 10061 |
Hot rolled hexagon steel bars for general purposes Dimensions and tolerances on shape and dimensions |
|
BSI BS EN 10221 |
Surface Quality Classes for Hot-Rolled Bars and Rods - Technical Delivery Conditions (V) |
|
BSI BS EN 13658-2 |
Metal lath and beads Definitions, requirements and test methods Part 2: External rendering-CORR 16420: July 31, 2006; Together with BS EN 13658-1 it supersedes BS 1369-1:1987 and BS 6452-1:1984 |
|
BSI BS EN ISO 1043-3 |
Plastics - Symbols and Abbreviated Terms - Part 3: Plasticizers |
|
BSI BS EN ISO 1183-2 |
Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method-Partially supersedes BS 2782-6:Methods 620A to 620D:1991 |
|
BSI BS ISO 7619-2 |
Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method-Together with BS ISO 7619-1, supersedes BS 903-A57:1997 |
|
BSI BS 131-6 |
Notched Bar Tests - Part 6: Method for Precision Determination of Charpy V-Notch Impact Energies for Metals |
|
BSI BS EN 10149-3 |
Specification for Hot-rolled flat products made of high yield strength steels for cold forming Part 3. Delivery conditions for normalized or normalized rolled steels-AMD 10150; December 15, 1998; Supersedes BS 1449: Section 1.4: 1991 and BS 1449: Section 1.10: 1991; |
|
BSI BS EN 10264-2 |
Steel Wire and Wire Products - Steel Wire for Ropes - Part 2: Cold Drawn Non Alloy Steel Wire for Ropes for General Applications-Together with BS EN 10264-1: 2002 and BS EN 10264-3, it Supersedes BS 2763: 1982, Which Will Be Withdrawn When BS EN 10264-3 is Published; |
|
BSI BS EN 10319-1 |
Metallic materials Tensile stress relaxation testing Part 1: Procedure for testing machines-CORR 14700: October 1, 2003; Supersedes BS 3500-6: 1969; |
|
BSI BS EN 1774 |
Corr. 1 Zinc and Zinc Alloys - Alloys for Foundry Purposes - Ingot and Liquid-CORR 10047; June 1998; Supersedes BS 1004: 1972; |
|
BSI BS EN 2157-2 |
Steel Forging Stock and Forgings Technical Specifications Part 2: Forging Stock (V) |
|
BSI BS EN ISO 14284 |
Steel and iron Sampling and preparation of samples for the determination of chemical composition-CORR 14256: December 5, 2002; |
|
BSI BS EN ISO 3386-1 |
Polymeric Materials, Cellular Flexible - Determination of Stress-Strain Characteristic in Compression Part 1: Low-Density Materials-Supersedes BS 4443: Part 1: 1988: Method 5A; |
|
BSI BS EN ISO 60 |
Plastics - Determination of Apparent Density of Material That Can Be Poured from a Specified Funnel-AMD 10680; January 2000; CORR 10854; February 2000; Replaces Method 501A of BS 2782: 1970; Renumbers BS 2782-6: Method 621A: 1978 |
|
BSI BS EN ISO 683-17 |
Heat-Treated Steels, Alloy Steels and Free-Cutting Steels - Part 17: Ball and Roller Bearing Steels |
|
BSI BS ISO 15348 |
Pipework - Metal Bellows Expansion Joints - General |
|
BSI BS ISO 15730 |
Metallic and Other Inorganic Coatings - Electropolishing as a Means of Smoothing and Passivating Stainless Steel |
|
BSI BS ISO 1629 |
Rubbers and Latices - Nomenclature (V) |
|
BSI BS 1429 |
Annealed Round Steel Wire for General Engineering Springs-Amd 1; |
|
BSI BS 2782-4:METHOD 434B |
Methods of Testing Plastics - Part 4: Chemical Properties - Method 434B: Determination of Antioxidants in Polyolefin Compounds by Ultra-violet Absorption of the Chloroform Extract |
|
BSI BS 8201 |
Code of Practice for Flooring of Timber, Timber Products and Wood Based Panel Products |
|
BSI BS EN 10132-2 |
Cold Rolled Narrow Steel Strip for Heat Treatment - Technical Delivery Conditions - Part 2: Case Hardening Steels-Together with BS EN 10132-1: 2000 and BS EN 10132-3: 2000; it Supersedes BS 1449.1.15: 1991; |
|
BSI BS EN 10169-3 |
Continuously organic coated (coil coated) steel flat products Part 3: Products for building interior applications |
|
BSI BS EN 10264-4 |
Steel Wire and Wire Products Steel Wire for Ropes Part 4: Stainless Steel Wire |
|
BSI BS EN 1173 |
Copper and Copper Alloys - Material Condition or Temper Designation (V) |
|
BSI BS EN 12166 |
Copper and Copper Alloys - Wire for General Purposes-Supersedes BS 2873: 1969; |
|
BSI BS EN 13411-6 |
Terminations for steel wire ropes Safety Part 6: Asymmetric wedge socket |
|
BSI BS EN 13600 |
Copper and Copper Alloys Seamless Copper Tubes for Electrical Purposes-Supersedes BS 1977: 1976; |
|
BSI BS EN 438-4 |
High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (Usually called Laminates) Part 4: Classification and specifications for Compact laminates of thickness 2 mm and greater-Together with BS EN 438 Parts 1, 3 and 5 thru 7 supersedes BS EN 438-1:1991 and BS EN 438-2:1991 |
|
BSI BS EN 635-1 |
Plywood - Classification by Surface Appearance Part 1: General-Partially Replaces BS 6566: Part 6: 1985; |
|
BSI BS EN ISO 1183-3 |
Plastics Methods for determining the density of non-cellular plastics Part 3: Gas pyknometer method-CORR 14473: September 26, 2003; |
|
BSI BS EN ISO 294-1 |
Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 1: General Principles, and Moulding of Multipurpose and Bar Test Specimens-AMD 10235: October 1998; AMD 13128: April 30, 2002; Renumbers BS 2782: Part 9: Method 910B: 1997 |
|
BSI BS 2782 PT 11: METH1150B |
Methods of Testing Plastics Part: 11 Thermoplastics Pipes, Fittings and Valves Method 1150B: Plastics Pipes and Fittings - Preparation of Polyethylene (PE) Pipe/Pipe or Pipe/Fitting Test Piece Assemblies by Butt Fusion-ISO 11414: 1996; |
|
BSI BS 2782:PT 1:METHOD 150D |
Methods of testing Plastics Part 1. Thermal Properties Method 150D. Cold Crack Temperature of Film and Thin Sheeting |
|
BSI BS 6362 |
Stainless Steel Tubes Suitable for Screwing in Accordance with BS 21 Pipe Threads for Tubes and Fittings Where Pressure-Tight Joints Are Made on the Threads |
|
BSI BS 903-5 |
Physical testing of rubber Part 5: Guide to the application of rubber testing to finite element analysis |
|
BSI BS EN 2429 |
Ethylene-Propylene Rubber (EPM/EPDM) Hardness 60 IRHD (V) |
|
BSI BS EN 754-1 |
Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube Part 1: Technical Conditions for Inspection and Delivery |
|
BSI BS EN ISO 7500-2 |
Metallic materials  Verification of static uniaxial testing machines  Part 2: Tension creep testing machines  Verification of the applied force |
|
BSI BS EN ISO 845 |
Cellular Plastics and Rubbers - Determination of Apparent (Bulk) Density (AMD 8978) December 15, 1995 (V)-Amd 1; |
|
BSI BS 2627 |
Wrought Aluminium for Electrical Purposes; Wire-AMD 3377: June 30, 1980; See Also BS 215: Part 1; |
|
BSI BS 2898 |
Wrought Aluminium and Aluminium Alloys for Electrical Purposes. Bars, Extruded Round Tube and Sections-Amd 1; |
|
BSI BS 3073 |
Nickel and Nickel Alloys: Strip-Amd 2; |
|
BSI BS 4370-2 |
Methods of Test for Rigid Cellular Materials - Part 2: Methods 7 to 9-AMD 13291:December 12,2001; |
|
BSI BS 4443-1 |
Methods of Test for Flexible Cellular Materials - Part 1: Method 4: Measurement of Cell Count-AMD 10309; November 2000; |
|
BSI BS 5046 |
Estimation of Equivalent Diameters in the Heat Treatment of Steel |
|
BSI BS 6014 |
Ethylene propylene rubber compounds Specification-CORR 14585: September 4, 2003; |
|
BSI BS 6729 |
Determination of the Dynamic Fracture Toughness of Metallic Materials-Amd 1; |
|
BSI BS 903 PART A21:SEC21.2 |
Physical Testing of Rubber Part A21: Determination of Rubber to Metal Bond Strength; Section 21.2: Two Plate Method-ISO 814: 1996; Supersedes Method A of BS 903: Part A21: 1989; |
|
BSI BS 903 PART A25 |
Physical Testing of Rubber Part A25: Determination of Low-Temperature Brittleness (ISO 812: 1991) (V) |
|
BSI BS EN 10151 |
Stainless steel strip for springs Technical delivery conditions-Supersedes BS 5770-4: 1981; |
|
BSI BS EN 61212-3-3 |
Insulating materials Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Part 3: Specifications for individual materials Sheet 3: Round laminated moulded rods |
|
BSI BS EN ISO 11306 |
Corrosion of Metals and Alloys - Guidelines for Exposing and Evaluating Metals and Alloys in Surface Sea Water |
|
BSI BS EN ISO 15512 |
Plastics Determination of water content-AMD 14837: January 19, 2004;; |
|
BSI BS ISO 3384 |
Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression at ambient and at elevated temperatures |
|
BSI BS 903 PART 1 |
Physical Testing of Rubber Part 1: Guide to the Selection and Use of Methods of Test for Rubber (V) |
|
BSI BS EN 10263-3 |
Steel Rod, Bars and Wire for Cold Heading and Cold Extrusion - Part 3: Technical Delivery Conditions for Case Hardening Steels-CORR 13451: September 13, 2001; Together with BS EN 10263-1:2001, BS EN 10263-2:2001 and BS EN 10263-4:2001 Supersedes BS 3111-1:1987; |
|
BSI BS EN 12385-10 |
Steel wire ropes Safety Part 10: Spiral ropes for general structural applications |
|
BSI BS EN 13658-1 |
Metal lath and beads Definitions, requirements and test methods Part 1: Internal plastering-CORR 16419: July 31, 2006; Together with BS EN 13658-2 it supersedes BS 1369-1:1987 and BS 6452-1:1984 |
|
BSI BS EN 1780-1 |
Aluminium and aluminium alloys Designation of alloyed aluminium ingots for remelting, master alloys and castings Part 1: Numerical designation system |
|
BSI BS EN 309 |
Particleboards Definition and classification |
|
BSI BS EN 636 |
Plywood Specifications-Supersedes BS EN 636-1: 1997; BS EN 636-2: 1997 and BS EN 636-3: 1997; |
|
BSI BS EN 754-3 |
Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube Part 3: Round Bars, Tolerances on Dimensions and Form (V) |
|
BSI BS EN 754-5 |
Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube Part 5: Rectangular Bars, Tolerances on Dimensions and Form (V) |
|
BSI BS EN ISO 3582 |
Flexible cellular polymeric materials Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame-CORR 16011: March 2006 |
|
BSI BS 2782-3: METHOD 323B |
Methods of Testing Plastics  Part 3: Mechanical properties  Method 323B: Flexural vibration  Non-resonance method-AMD 16994: March 30, 2007 |
|
BSI BS 2782-3: METHOD 323C |
Methods of testing Plastics  Part 3: Mechanical properties  Method 323C: Shear vibration  Non-resonance method-AMD 16995: March 30, 2007 |
|
BSI BS 3592 PART 1 |
Steel Wire for Hose Reinforcement Part 1: Specification for Coated Round and Flat Steel Wire for Rubber Hose Reinforcement-AMD 7283; October 15, 1992 |
|
BSI BS 6404-8.1 |
Magnetic Materials - Part 8: Specifications for Individual Materials - Section 8.1: Magnetically Hard Materials-CORR 13338: September 2001; AMD 15959: March 2006: IEC 60404-8-1: 2001 |
|
BSI BS EN 10244-3 |
Steel Wire and Wire Products - Non-Ferrous Metallic Coatings on Steel Wire - Part 3: Aluminium Coatings |
|
BSI BS EN 10244-6 |
Steel Wire and Wire Products - Non-Ferrous Metallic Coatings on Steel Wire - Part 6: Copper, Bronze or Brass Coatings |
|
BSI BS EN 10263-1 |
Steel rod, bars and wire for cold heading and cold extrusion Part 1: General technical delivery conditions-CORR 14066: December 16, 2002; Together with BS EN 10263-2: 2001, BS EN 10263-3: 2001 and BS EN 10263-4: 2001 it supersedes BS 3111-1: 1987; Supersedes BS 3111-1: 1987 and BS 3111-2: 1979; |
|
BSI BS EN 12735-2 |
Copper and Copper Alloys - Seamless, Round Copper Tubes for Air-Conditioning and Refrigeration - Part 2: Tubes for equipment-AMD 16369: August 2006 |
|
BSI BS EN 546-3 |
Aluminium and aluminium alloys  Foil  Part 3: Tolerances on dimensions |
|
BSI BS EN 570 |
Aluminium and Aluminium Alloys - Impact Extrusion Slugs Obtained From Wrought Products - Specifications (V) |
|
BSI BS EN 586-1 |
Aluminium and Aluminium Alloys - Forgings Part 1: Technical Conditions for Inspection and Delivery |
|
BSI BS EN 60404-2 |
Magnetic Materials Part 2: Methods of Measurement of the Magnetic Properties of Electrical Steel Sheet and Strip by Means of an Epstein Frame-AMD 10038: July 1998; Renumbers BS 6404: PART 2:1996; IEC 404-2:1996 |
|
BSI BS EN ISO 14556 |
Steel - Charpy V-Notch Pendulum Impact Test - Instrumented Test Method-AMD 16537: September 29, 2006 |
|
BSI BS EN ISO 179-2 |
Plastics - Determination of Charpy Impact Properties - Part 2: Instrumented Impact Test-CORR 10777; February 2000; Also Known as BS 2782-2: Method 359B: 1999 |
|
BSI BS ISO 6743-1 |
Lubricants, industrial oils and related products (class L) Classification Part 1: Family A (Total loss systems)-Supersedes BS 6413-1: 1983; |
|
BSI BS 3816 |
Epoxy Resin Casting Systems Used for Electrical Insulating Applications at Power Frequencies |
|
BSI BS EN 10244-4 |
Steel Wire and Wire Products - Non-Ferrous Metallic Coatings on Steel Wire - Part 4: Tin Coatings |
|
BSI BS EN 10274 |
Metallic Materials - Drop Weight Tear Test |
|
BSI BS EN 12385-6 |
Steel wire ropes Safety Part 6: Stranded ropes for mine shafts-Supersedes BS 302-6:1987 |
|
BSI BS EN 1313-2 |
Round and Sawn Timber - Permitted Deviations and Preferred Sizes - Part 2: Hardwood Sawn Timber-CORR 10981: August 2000; |
|
BSI BS EN 1904 |
Precious Metals - The Finenesses of Solders Used with Precious Metal Jewellery Alloys |
|
BSI BS EN 1971 |
Copper and Copper Alloys - Eddy Current Test for Tubes-Supersedes BS 3889-2B: 1966; |
|
BSI BS EN 2157-1 |
Steel Forging Stock and Forgings Technical Specifications Part 1: General Requirements (V) |
|
BSI BS EN 635-3 |
Plywood - Classification by Surface Appearance Part 3: Softwood-AMD 9125: June 15, 1996; Supersedes BS 6566: Part 6: 1985 |
|
BSI BS EN ISO 1874-1 |
Plastics - Polyamide (PA) Moulding and Extrusion Materials - Part 1: Designation-ISO 1874-1:1992; |
|
BSI BS EN ISO 1874-2 |
Plastics  Polyamide (PA) moulding and extrusion materials  Part 2: Preparation of test specimens and determination of properties |
|
BSI BS EN ISO 376 |
Metallic materials Calibration of force-proving instruments used for the verification of uniaxial testing machines |
|
BSI BS EN ISO 5981 |
Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Combined Shear Flexing and Rubbing |
|
BSI BS ISO 11357-5 |
Plastics - Differential Scanning Calorimetry (DSC) - Part 5: Determination of Characteristic Reaction-Curve Temperatures and Times, Enthalpy of Reaction and Degree of Conversion |
|
BSI BS ISO 17577 |
Steel Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm |
|
BSI BS ISO 34-1 |
Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
|
BSI BS 1434 |
Copper for Electrical Purposes: Copper Sections in Bars, Blanks and Segments for Commutators |
|
BSI BS 2782-3: METHOD 323D |
Methods of testing Plastics  Part 3: Mechanical properties  Method 323D: Torsional vibration  Non-resonance method-AMD 16993: March 30, 2007 |
|
BSI BS 2782-3:METHOD 360C |
Methods of Testing Plastics - Part 3: Mechanical Properties - Method 360C: Determination of Tear Resistance of Plastics Film and Sheeting by the Initiation Method |
|
BSI BS 3012 |
Low and Intermediate Density Polythene Sheet for General Purposes-AMD 1006: August 11, 1972 |
|
BSI BS 3558 PART 1 |
Glossary of Rubber Terms Part 1: International Terms-ISO 1382: 1996; |
|
BSI BS 6533 |
Guide to Microscopic Examination of Steel by Etching with Strong Mineral Acids |
|
BSI BS 7339 |
Code of Practice for Supplementary Checking of Metallic Materials of Construction in Pressurized Systems |
|
BSI BS 903 PART A3 SEC 3.2 |
Physical Testing of Rubber Part A3: Determination of Tear Strength Section 3.2 Small (Delft) Test Pieces-ISO 34-2: 1996; |
|
BSI BS EN 10223-7 |
Steel wire and wire products for fences Part 7: Steel wire welded panels For fencing |
|
BSI BS EN 10248-2 |
Hot Rolled Sheet Piling of Non Alloy Steels Part 2: Tolerances on Shape and Dimensions (V) |
|
BSI BS EN 12510 |
Wood poles for overhead lines Strength grading criteria-CORR 14054: December 16, 2002; |
|
BSI BS EN 1393 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of Initial Longitudinal Tensile Properties-AMD 9904: March 15, 1998; Also Known as BS 2782: Part 12: Methods 1210A to 1210C: 1997; |
|
BSI BS EN 546-1 |
Aluminium and aluminium alloys  Foil  Part 1: Technical conditions for inspection and delivery |
|
BSI BS EN 604-1 |
Aluminium and Aluminium Alloys - Cast Forging Stock Part 1: Technical Conditions for Inspection and Delivery-Replaces Some Sections of BS 1472: 1972; |
|
BSI BS EN ISO 13000-2 |
Plastics Polytetrafluoroethylene (PTFE) semi-finished products Part 2: Preparation of test specimens and determination of properties |
|
BSI BS EN ISO 1923 |
Cellular Plastics and Rubbers - Determination of Linear Dimensions (V) |
|
BSI BS ISO 12107 |
Metallic materials Fatigue testing Statistical planning and analysis of data-Supersedes BS 3518-5:1996; |
|
BSI BS ISO 13226 |
Rubber - Standard Reference Elastomers (SRE's) for Characterizing the Effect of Liquids on Vulcanized Rubbers |
|
BSI BS ISO 17804 |
Founding Ausferritic spheroidal graphite cast irons Classification |
|
BSI BS ISO 21988 |
Abrasion-resistant cast irons  Classification |
|
BSI BS ISO 2782 |
Rubber, vulcanized or thermoplastic  Determination of permeability to gases |
|
BSI BS ISO 4998 |
Continuous hot-dip zinc-coated carbon steel sheet of structural quality |
|
BSI PD CEN/TR 15351 |
Plastics Guide for vocabulary in the field of degradable and biodegradable polymers and plastic items |
|
BSI BS 2782 PT 3: METH 323E |
Methods of Testing Plastics Part 3: Mechanical Properties Method 323E: Longitudinal and Shear Vibration - Wave-Propagation Method-ISO 6721-8: 1997; |
|
BSI BS 2782-1:METHOD 140D |
Methods of Testing Plastics Part 1. Thermal Properties Method 140D. Flammability of a Test Piece 550 mm X 35 mm of Thin Polyvinyl Chloride Sheeting (Laboratory Method) |
|
BSI BS 2782-7:Method 732D |
Testing of Plastics Part 7:Rheological Properties - Method 732D: Determination of the Viscosity of Polycarbonate (PC) Moulding and Extrusion Materials in Dilute Solution Using Capillary Viscometers-ISO 1628-4:1999; |
|
BSI BS 2782PT11: METH 1108A |
Methods of Testing Plastics Part 11: Thermoplastics Pipes, Fittings and Valves Method 1108A: True Impact Rate (TIR) Boundaries of Pipes (Read in Conjunction with BS 2782: Part 0) |
|
BSI BS 2782PT3: METH 320A-F |
Methods of Testing Plastics Part 3: Mechanical Properties Methods 320A to 320F: Tensile Strength, Elongation and Elastic Modulus-AMD 8057; January 1994; Supersedes BS 2782: Method 321: 1993, BS 2782: Part 3: Method 322: 1994 |
|
BSI BS 4300/10 |
Specification (Supplementary Series) for Wrought Aluminium and Aluminium Alloys for General Engineerings Purposes /10: 5454 Drawn Tube-Amd 1; |
|
BSI BS 903-A58.1 |
Physical Testing of Rubber - Methods Using the Mooney Viscometer - Determination of the Delta Mooney Value for Non-Pigmented, Oil-Extended, Emulsion-Polymerized SBR-ISO 289-3:1999; |
|
BSI BS EN 10244-5 |
Steel Wire and Wire Products - Non-Ferrous Metallic Coatings on Steel Wire - Part 5: Nickel Coatings |
|
BSI BS EN 12373-2 |
Aluminium and Aluminium Alloys - Anodizing - Part 2: Determination of Mass per Unit Area (Surface Density) of Anodic Oxidation Coatings - Gravimetric Method-Supersedes BS 6161-1: 1984; |
|
BSI BS EN 12385-8 |
Steel wire ropes Safety Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons |
|
BSI BS EN 1301-2 |
Aluminium and Aluminium Alloys - Drawn Wire Part 2: Mechanical Properties-Together with Parts 1 and 3 of BS EN 1301, it Supersedes BS 1475: 1972; |
|
BSI BS EN 1778 |
Characteristic Values for Welded Thermoplastics Constructions - Determination of Allowable Stresses and Moduli for Design of Thermoplastics Equipment |
|
BSI BS EN 300 |
Oriented Strand Boards (OSB) Definitions, classification and specifications |
|
BSI BS EN 635-2 |
Plywood - Classification by Surface Appearance Part 2: Hardwood-AMD 9124: June 1996; Supersedes BS 6566: Part 6: 1985; |
|
BSI BS EN ISO 11127-6 |
Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 6: Determination of water-soluble contaminants by conductivity measurement-AMD 9851: February 1998; Renumbers BS 7079-F16: 1994 |
|
BSI BS EN ISO 4589-1 |
Plastics - Determination of Burning Behaviour by Oxygen Index - Part 1: Guidance-AMD 10629: 4/2000; Renumbers BS ISO 4589-1: 1997 |
|
BSI BS EN ISO 472 |
Plastics - Vocabulary-AMD 13329: 10/31/2001; Renumbers BS ISO 472:1999; ISO 472:1999 |
|
BSI BS EN ISO 6383-2 |
Plastics Film and sheeting Determination of tear resistance Part 2: Elmendorf method-AMD 15285:September 15, 2004; Renumbers BS 2782-3 Method 360A:1991 |
|
BSI BS EN ISO 877 |
Plastics - Methods of Exposure to Direct Weathering, to Weathering Using Glass-Filtered Daylight, and to Intensified Weathering by Daylight Using Fresnel Mirrors-AMD 9494: June 1997; Renumbers BS 2782: Method 550B: 1996 |
|
BSI BS ISO 10931-2 |
Plastics Piping Systems for Industrial Applications - Poly(Vinylidene Fluoride) Part 2: Pipes |
|
BSI BS ISO 16784-1 |
Corrosion of metals and alloys Corrosion and fouling in industrial cooling water systems Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems |
|
BSI BS ISO 35 |
Natural rubber latex concentrate Determination of mechanical stability-AMD 16246: April 28, 2006;:1996 |
|
BSI BS ISO 7625 |
Sintered metal materials, excluding hardmetals  Preparation of samples for chemical analysis for determination of carbon content |
|
BSI BS ISO 8296 |
Plastics Film and sheeting Determination of wetting tension |
|
BSI BS 2782-2:METHOD 241A |
Methods of Testing Plastics - Part 2: Electrical Properties Method 241A: Determination of Effect of Polyvinyl Chloride Compound on the Loss Tangent of polyethylene |
|
BSI BS 2782-4: METH 454G |
Methods of Testing Plastics Part 4: Chemical Properties Method 454G: Polymer Dispersions - Determination of Sieve Residue (Gross Particle and Coagulum Content) (ISO 4576: 1996) (V) |
|
BSI BS 3071 |
Nickel-Copper Alloy Castings |
|
BSI BS 6716 |
Properties and Types of Rubber |
|
BSI BS 7837 |
Flammability Performance for Textiles Used in the Construction of Marquees and Similar Textile Structures (V) |
|
BSI BS EN 10263-2 |
Steel Rod, Bars and Wire for Cold Heading and Cold Extrusion - Part 2: Technical Delivery Conditions for Steels Not Intended for Heat Treatment After Cold Working-CORR 13450: September 13, 2001; Together with BS EN 10263-1:2001, BS EN 10263-3:2001 and BS EN 10263-4:2001 Supersedes BS 3111-1: 1987; |
|
BSI BS EN 10271 |
Electrolytically Zinc-Nickel (ZN) Coated Steel Flat Products - Technical Delivery Conditions |
|
BSI BS EN 12385-9 |
Steel wire ropes Safety Part 9: Locked coil carrying ropes for cableway installations designed to carry persons |
|
BSI BS EN 2103 PART 3 |
Steel, Nickel Base and Cobalt Base Alloy Remelting Stock and Castings. Technical Specification Part 3: Pre-Production and Production Castings (V) |
|
BSI BS EN 438-6 |
High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (Usually called Laminates) Part 6: Classification and specifications for Exterior-grade Compact laminates of thickness 2 mm and greater-Together with BS EN 438-1 thru -5 and -7 Supersedes BS EN 438-1: 1991 and BS EN 438-2: 1991 |
|
BSI BS EN 603-2 |
Aluminium and Aluminium Alloys - Wrought Forging Stock Part 2: Mechanical Properties-Partially Supersedes BS 1472: 1972; |
|
BSI BS EN 623-4 |
Advanced technical ceramics Monolithic ceramics General and textural properties Part 4: Determination of surface roughness-DD ENV 623-4:1994 |
|
BSI BS EN 635-5 |
Plywood - Classification by Surface Appearance - Part 5: Methods for Measuring and Expressing Characteristics and Defects |
|
BSI BS EN 754-8 |
Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube - Part 8: Porthole Tubes, Tolerances on Dimensions and Form-Supersedes BS 1471: 1972; |
|
BSI BS EN ISO 11127-1 |
Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 1: Sampling-AMD 9846: February 1998; Renumbers BS 7079-F11: 1994 |
|
BSI BS EN ISO 11963 |
Plastics - Polycarbonate Sheets - Types, Dimensions and Characteristics (V) |
|
BSI BS EN ISO 14616 |
Plastics Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures Determination of the shrinkage stress and contraction stress-AMD 15251:September 8, 2004; Renumbers BS ISO 14616:1997 |
|
BSI BS EN ISO 2624 |
Copper and Copper Alloys - Estimation of Average Grain Size (V) |