|
BSI BS EN ISO 6721-1 |
Plastics - Determination of Dynamic Mechanical Properties Part 1: General Principles |
|
BSI BS 2540 |
Granular Desiccant Silica Gel-AMD 9654: September 1997; |
|
BSI BS 2782-4:METHOD 434D |
Methods of Testing Plastics - Part 4: Chemical Properties - Method 434D: Determination of Antioxidants in Polyolefin Compounds by a Spectrophotometric Method |
|
BSI BS 3396 PART 3 |
Woven Glass Fibre Fabrics for Plastics Reinforcement Part 3: Finished Fabrics for Use with Polyester Resin Systems |
|
BSI BS 903 PART A18 |
Methods of Testing Vulcanized Rubber Part A18: Determination of Equilibrium Water Vapour Absorption |
|
BSI BS 903-A58 |
Physical Testing of Rubber - Part A58: Methods Using the Mooney Viscometer-AMD 12086: June 2001; Together with BS 903-A59, Supersedes BS 1673-3: 1969; |
|
BSI BS EN 10218-1 |
Steel Wire and Wire Products - General Part 1: Test Methods (V) |
|
BSI BS EN 10218-2 |
Steel Wire and Wire Products - General Part 2: Wire Dimensions and Tolerances |
|
BSI BS EN 10263-5 |
Steel Rod, Bars and Wire for Cold Heading and Cold Extrusion - Part 5: Technical Delivery Conditions for Stainless Steels-CORR 13453: September 13, 2001; Together with BS EN 10263-1:2001 Supersedes BS 3111-2:1979; |
|
BSI BS EN 12373-3 |
Aluminium and Aluminium Alloys - Anodizing - Part 3: Determination of Thickness of Anodic Oxidation Coatings - Non-Destructive Measurement by Split-Beam Microscope-Supersedes BS 6161-2: 1981; |
|
BSI BS EN 12373-5 |
Aluminium and Aluminium Alloys - Anodizing - Part 5: Assessment of Quality of Sealed Anodic Oxidation Coatings by Measurement of Admittance-Supersedes BS 6161-6: 1984; |
|
BSI BS EN 12452 |
Copper and Copper Alloys - Rolled, Finned, Seamless Tubes for Heat Exchangers |
|
BSI BS EN 12513 |
Founding - Abrasion Resistant Cast Irons-AMD 13275: October 8, 2001; Supersedes BS 4844: 1986; |
|
BSI BS EN 1753 |
Magnesium and Magnesium Alloys - Magnesium Alloy Ingots and Castings-Supersedes BS 2970: 1989; |
|
BSI BS EN 1978 |
Copper and Copper Alloys - Copper Cathodes-Together with BS EN 1976:1998 Supersedes BS 6017:1981; |
|
BSI BS EN 486 |
Aluminium and Aluminium Alloys - Extrusion Ingots - Specifications (V) |
|
BSI BS EN ISO 11127-2 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non-Metallic Blast-Cleaning Abrasives Part 2: Determination of Particle Size Distribution-AMD 9847: February 1998; Renumbers BS 7079 Part F12:1994 |
|
BSI BS EN ISO 2439 |
Flexible Cellular Poymeric Materials - Determination of Hardness (Indentation Technique)-Supersedes BS 4443-2:1988; |
|
BSI BS EN ISO 6509 |
Corrosion of Metals and Alloys - Determination of Dezincification Resistance of Brass |
|
BSI BS ISO 11303 |
Corrosion of metals and alloys Guidelines for selection of protection methods against atmospheric corrosion |
|
BSI BS ISO 2285 |
Rubber, Vulcanized or Thermoplastic - Determination of Tension Set under Constant Elongation, and of Tension Set, Elongation and Creep under Constant Tensile Load-Supersedes BS 903-A5: 1997; |
|
BSI BS 2782PT11: METH 1112A |
Methods of Testing Plastics Part 11: Thermoplastic Pipes, Fittings and Valves Method 1112A: Leaktightness of Thermoplastics Pipes and Fittings for Non- Pressure Applications-Superseded by BS EN 1053: 1996; Read in Conjunction with BS 2782: Part 0 |
|
BSI BS 2782PT3: METH 327A |
Methods of Testing Plastics Part 3: Mechanical Properties Method 327A: Determination of Tensile Strength and Elongation at Break of Polytetrafluoroethylene (PTFE) Products-Read in Conjunction with BS 2782: Part 0 |
|
BSI BS 2782PT8: METH 824A |
Methods of Testing Plastics Part 8: Other Properties Method 824A: Film and Sheeting - Determination of the Coefficients of Friction (ISO 8295: 1995) (V)-Renumbered as BS EN ISO 8295:2004 |
|
BSI BS 4203 PART 2 |
Extruded Rigid PVC Corrugated Sheeting Part 2: Profiles and Dimensions |
|
BSI BS 4370 PART 4 |
Methods of Test for Rigid Cellular Materials Part 4: Method 14. Determination of Flexural Properties |
|
BSI BS 4816 |
Determination of the Puncture Resistance of Board-Amd 1; |
|
BSI BS 4840 PART 2 |
Rigid Polyurethane (PUR) Foam in Slab Form Part 2: Specification for PUR Foam for Use in Refrigerator Cabinets, Cold Rooms and Stores (V) |
|
BSI BS 903 PART A37 |
Physical Testing of Rubber Part A37: Determination of Tendency to Adhere to and to Corrode Metals-ISO 6505: 1997; |
|
BSI BS 903 PART A8 |
Methods of Testing Vulcanized Rubber Part A8: Determination of Rebound Resilience |
|
BSI BS EN 10016-1 |
Non-Alloy Steel Rod for Drawing and/or Cold Rolling Part 1: General Requirements (V) |
|
BSI BS EN 10205 |
Cold Reduced Blackplate in Coil Form for the Production of Tinplate or Electrolytic Chromium/Chromium Oxide Coated Steel (In Accordance with BS EN 10203 or BS EN 10202) (V) |
|
BSI BS EN 10307 |
Non-Destructive Testing - Ultrasonic Testing of Austenitic and Austenitic and Austenitic-Ferritic Stainless Steels Flat Products of Thickness Equal to or Greater Than 6mm (Reflection Method) |
|
BSI BS EN 10326 |
Continuously hot-dip coated strip and sheet of structural steels Technical delivery conditions-Supersedes BS EN 10147:2000, BS EN 10154:2002, BS EN 10214:1995 and BS EN 10215:1995 |
|
BSI BS EN 1186-3 |
Materials and Articles in Contact with Foodstuffs - Plastics - Part 3: Test Methods for Overall Migration into Aqueous Food Simulants by Total Immersion-Supersedes DD ENV 1186-3: 1994; |
|
BSI BS EN 12373-13 |
Aluminium and Aluminium Alloys - Anodizing - Part 13: Measurement of Reflectance Characteristics of Aluminium Surfaces Using a Goniophotometer or an Abridged Goniophotometer |
|
BSI BS EN 12373-4 |
Aluminium and Aluminium Alloys - Anodizing - Part 4: Estimating of Loss of Absorptive Power of Anodic Oxidation Coatings After Sealing by Dye Spot Test with Prior Acid Treatment-Supersedes BS 6161-5: 1982; |
|
BSI BS EN 1301-3 |
Aluminium and Aluminium Alloys - Drawn Wire Part 3: Tolerances on Dimensions-Together with Parts 1 and 2, This Document Supersedes BS 1475: 1972; |
|
BSI BS EN 13986 |
Wood-based panels for use in construction Characteristics, evaluation of conformity and marking |
|
BSI BS EN 1402-1 |
Unshaped refractory products Part 1: Introduction and classification-Supersedes DD ENV 1402-1:1995; |
|
BSI BS EN 313-1 |
Plywood - Classification and Terminology Part 1: Classification (V) |
|
BSI BS EN 586-3 |
Aluminium and Aluminium Alloys - Forgings - Part 3: Tolerances on Dimensions and Form |
|
BSI BS EN 843-2 |
Advanced technical ceramics  Mechanical properties of monolithic ceramics at room temperature  Part 2: Determination of Young’s modulus, shear modulus and Poisson’s ratio |
|
BSI BS EN ISO 10062 |
Corrosion Tests in Artificial Atmospheres at Very Low Concentrations of Polluting Gas(es)-AMD 8615: August 1995; Formerly BS 7561: 1992 |
|
BSI BS EN ISO 11125-7 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives Part 7: Determination of Moisture-AMD 9725: November 1997; Renumbers BS 7079 Part E12: 1994 |
|
BSI BS EN ISO 11127-5 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non-Metallic Blast-Cleaning Abrasives Part 5: Determination of Moisture-AMD 9850: February 1998; Renumbers BS 7079 Part F15 1994 |
|
BSI BS EN ISO 1628-3 |
Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 3: Polyethylenes and polypropylenes |
|
BSI BS EN ISO 7143 |
Binders for paints and varnishes  Methods of test for characterizing water-based binders |
|
BSI BS EN ISO 7799 |
Metallic Materials - Sheet and Strip 3 mm Thick or Less - Reverse Bend Test |
|
BSI BS EN ISO 899-2 |
Plastics Determination of creep behaviour Part 2: Flexural creep by three-point loading-Corr 1; Corr 14607; July 29, 2003; |
|
BSI BS ISO 11443 |
Plastics Determination of the fluidity of plastics using capillary and slit-die rheometers-Supersedes BS 2782-7:Method 722B:1996 |
|
BSI BS ISO 2475 |
Chloroprene rubber (CR) General-purpose types Evaluation procedure-CORR 13340: September 19, 2001; AMD 16150: July 31, 2006;:1992 |
|
BSI BS ISO 4664-1 |
Rubber, vulcanized or thermoplastic Determination of dynamic properties Part 1: General guidance-:1998 |
|
BSI BS ISO 5418-1 |
Iron ores  Determination of copper  Part 1: 2,2'-Biquinolyl spectrophotometric method |
|
BSI BS 2782 PT 3: METHOD 352E |
Methods of testing plastics Part 3: Mechanical properties Method 352E: Determination of impact resistance by the free-falling dart method (Staircase method)-ISO 7765-1: 1988; Renumbered by BS EN ISO 7765-1:2004 |
|
BSI BS 2782-5: METHOD 521A |
Methods of testing Plastics Part 5: Optical and colour properties, weathering Method 521A: Determination of haze of film and sheet |
|
BSI BS 2782-5: METHOD 540C |
Methods of testing Plastics Part 5: Optical and colour properties, weathering Method 540C: Determination of ultraviolet radiation intensity using polysulphone film |
|
BSI BS 3241 |
Toughened Polystyrene for Sheet Extrusion-Amd 1; |
|
BSI BS 771 |
Phenolic Moulding Materials (ISO 800: 1992) |
|
BSI BS 903 PART C5 |
Physical Testing of Rubber Part C5: Determination of Insulation Resistance-Also Known as BS 2782-2:METH 232:1992; IEC 167:1964 |
|
BSI BS EN 10017 |
Steel rod for drawing and/or cold rolling Dimensions and tolerances-Supersedes BS 4956:1973 |
|
BSI BS EN 10092-1 |
Hot rolled spring steel flat bars Part 1: Flat bars Dimensions and tolerances on shape and dimensions |
|
BSI BS EN 10263-4 |
Steel Rod, Bars and Wire for Cold Heading and Cold Extrusion - Part 4: Technical Delivery Conditions for Steels for Quenching and Tempering-CORR 14045: January 24, 2003; Together with BS EN 10263-1:2001, BS EN 10263-2:2001 and BS EN 10263-3:2001 Supersedes BS 3111-1:1987; |
|
BSI BS EN 10303 |
Thin Magnetic Steel Sheet and Strip for Use at Medium Frequencies-Supersedes BS 6404-8.8:1992; |
|
BSI BS EN 1186-1 |
Materials and Articles in Contact with Foodstuffs - Plastics - Part 1: Guide to the Selection of Conditions and Test Methods for Overall Migration-Supersedes DD ENV 1186-1: 1994; |
|
BSI BS EN 1186-14 |
Materials and articles in contact with foodstuffs Plastics Part 14: Test methods for ‘substitute tests’ for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95% ethanol-Supersedes DD ENV 1186-14: 1999; |
|
BSI BS EN 1186-7 |
Materials and Articles in Contact with Foodstuffs - Plastics - Part 7: Test Methods for Overall Migration into Aqueous Food Simulants Using a Pouch-Supersedes DD ENV 1186-7: 1994; |
|
BSI BS EN 12369-2 |
Wood-based panels Characteristic values for structural design Part 2: Plywood |
|
BSI BS EN 12500 |
Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments |
|
BSI BS EN 1402-3 |
Unshaped refractory products Part 3: Characterization as received-Supersedes DD ENV 1402-3: 1999; |
|
BSI BS EN 14195 |
Metal framing components for gypsum plasterboard systems Definitions, requirements and test methods-CORR 16495:July 31, 2006 |
|
BSI BS EN 14868 |
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems |
|
BSI BS EN 727 |
Plastics Piping and Ducting Systems - Thermoplastics Pipes and Fittings - Determination of Vicat Softening Temperature (VST)-Also Known as BS 2782-11:Method 1103V:1995 |
|
BSI BS EN ISO 176 |
Plastics Determination of loss of plasticizers Activated carbon method |
|
BSI BS EN ISO 1856 |
Flexible Cellular Polymeric Materials - Determination of Compression Set |
|
BSI BS EN ISO 307 |
Plastics - Polyamides - Determination of Viscosity Number |
|
BSI BS EN ISO 5470-2 |
Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 2: Martindale abrader-CORR 14609: July 31, 2003; |
|
BSI BS EN ISO 585 |
Plastics - Unplasticized Cellulose Acetate - Determination of Moisture Content-AMD 10615: 11/1999; Renumbers BS 2782-4: Meth 431C:1991 |
|
BSI BS EN ISO 7214 |
Cellular Plastics - Polyethylene - Methods of Test-AMD 13595; March 21, 2002; Renumbers BS ISO 7214:1998; |
|
BSI BS ISO 1431-1 |
Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing-Supersedes BS 903-A43:1990 and BS 903-A44:1995 |
|
BSI BS ISO 1997 |
Granulated cork and cork powder Classification, properties and packing |
|
BSI BS ISO 974 |
Plastics - Determination of the Brittleness Temperature by Impact |
|
BSI BS 2782-4: METHOD 452D-F |
Methods of testing Plastics Part 4: Chemical properties Method 452D: Determination of pH of water extract of polyolefin compound Method 452E: Determination of water-soluble sulphates in polyolefin compound Method 452F: Determination of water-soluble chlorides in polyolefin compound-Replaces Methods 406A, 406B, 406C of BS 2782: 1970 |
|
BSI BS 2782PT10: METH 1005 |
Methods of Testing Plastics Part 10: Glass Reinforced Plastics Method 1005: Determination of Flexural Properties. Three Point Method |
|
BSI BS 2782PT11: METH 1110 |
Methods of Testing Plastics Part 11: Thermoplastics Pipes, Fittings and Valves Method 1110: Tensile Properties of Dumb-Bell Specimens from PVC Gutter Profiles or Pipes for Non-Pressure Applications-Read in Conjunction with BS 2782: Part 0 |
|
BSI BS 2782PT7: METH 721A |
Methods of Testing Plastics Part 7: Rheological Properties Method 721A: Determination of Resin Flow from Resin Impregnated Glass Fabric |
|
BSI BS 2897 |
Wrought Aluminium for Electrical Purposes. Strip with Drawn or Rolled Edges-Amd 1; |
|
BSI BS 2919 |
Low and Intermediate Density Polythene Rod for General Purposes |
|
BSI BS 419 |
Varnished Fabrics and Tapes for Electrical Purposes |
|
BSI BS 4203 PART 1 |
Extruded Rigid PVC Part 1: Corrugated Sheeting Performance Requirements |
|
BSI BS 4443 PART 7 |
Methods of Test for Flexible Cellular Materials Part 7: Method 17. Determination of Tear Strength of Flexible Cellular Material with an Integral Skin Method 18. Determination of Compression Set Under Humid Conditions |
|
BSI BS 4646 |
High Density Polythene Sheet for General Purposes |
|
BSI BS 6285 |
Macrographic Examination of Steel by Sulphur Print (Baumann Method) |
|
BSI BS 903 PART A14 |
Physical Testing of Rubber Part A14: Method for Determination of Modulus in Shear or Adhesion to Rigid Plates - Quadruple Shear Method (ISO 1827: 1991) |
|
BSI BS EN 10031 |
Semi finished products for forging - Tolerances on dimensions shape and mass |
|
BSI BS EN 10108 |
Round steel rod for cold heading and cold extrusion Dimensions and tolerances |
|
BSI BS EN 1172 |
Copper and Copper Alloys - Sheet snd Strip for Building Purposes |
|
BSI BS EN 1179 |
Zinc and zinc alloys Primary zinc |
|
BSI BS EN 1186-15 |
Materials and articles in contact with foodstuffs Plastics Part 15: Alternative test methods to migration into fatty food simulants by rapid extraction into iso-octane and/or 95% ethanol |
|
BSI BS EN 12373-6 |
Aluminium and Aluminium Alloys - Anodizing - Part 6: Assessment of Quality of Sealed Anodic Oxidation Coatings by Measurement of the Loss of Mass After Immersion in Phosphoric Acid/Chromic Acid Solution without Prior Acid Treatment-Supersedes BS 6161-3: 1984; |
|
BSI BS EN 12373-9 |
Aluminium and Aluminium Alloys - Anodizing - Part 9: Measurement of Wear Resistance and Wear Index of Anodic Oxidation Coatings Using an Abrasive Wheel Wear Test Apparatus-Supersedes BS 6161-9: 1987; |
|
BSI BS EN 12450 |
Copper and Copper Alloys - Seamless, Round Copper Capillary Tubes |
|
BSI BS EN 13835 |
Founding Austenitic cast irons-AMD 16673: October 31, 2006; Supersedes BS 3468: 1986 |
|
BSI BS EN 2004-1 |
Test Methods for Aluminium and Aluminium Alloy Products Part 1: Determination of Electrical Conductivity of Wrought Aluminium Alloys (V) |
|
BSI BS EN 313-2 |
Plywood - Classification and Terminology - Part 2: Terminology |
|
BSI BS EN 315 |
Plywood - Tolerances for Dimensions |
|
BSI BS EN 318 |
Wood Based Panels - Determination of Dimensional Changes Associated with Changes in Relative Humidity |
|
BSI BS EN 335-3 |
Durability of Wood and Wood-Based Products - Definition of Hazard Classes of Biological Attack Part 3: Application to Wood-Based Panels (V) |
|
BSI BS EN 60404-4 |
Magnetic Materials - Part 4: Methods of Measurement of d.c. Magnetic Properties of magnetically soft Materials-AMD 13937: November 2002; Supersedes BS 6404-4: 1986; |
|
BSI BS EN 843-3 |
Advanced technical ceramics  Mechanical properties of monolithic ceramics at room temperature  Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests |
|
BSI BS EN 843-4 |
Advanced technical ceramics  Mechanical properties of monolithic ceramics at room temperature  Part 4: Vickers, Knoop and Rockwell superficial hardness |
|
BSI BS EN ISO 14126 |
Fibre-reinforced plastic composites Determination of compressive properties in the in-plane direction-CORR 14169: February 20, 2003; |
|
BSI BS EN ISO 2039-2 |
Plastics - Determination of Hardness - Part 2: Rockwell Hardness-AMD 10694: May 2000; Renumbers BS 2782-3: Method 365C: 1992 |
|
BSI BS EN ISO 308 |
Plastics - Phenolic Moulding Materials - Determination of Acetone-Soluble Matter (Apparent Resin Content of Material in the Unmoulded State)-Also Known as BS 2782-4-451C: 1998; Supersedes BS 2782-4: Method 451C: 1978 |
|
BSI BS EN ISO 7441 |
Corrosion of metals and alloys Determination of bimetallic corrosion in outdoor exposure corrosion tests-Supersedes BS 6682: 1986 |
|
BSI BS ISO 17281 |
Plastics Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s) |
|
BSI BS ISO 36 |
Rubber, vulcanized or thermoplastic Determination of adhesion to textile fabrics |
|
BSI BS ISO 4997 |
Cold-reduced carbon steel sheet of structural quality |
|
BSI BS ISO 8013 |
Rubber, vulcanized  Determination of creep in compression or shear |
|
BSI BS 2782 PT 3: METH 323F |
Methods of Testing Plastics Part 3: Mechanical Properties Method 323F: Tensile Vibration - Sonic-Pulse Propagation Method-ISO 6721-9: 1997; |
|
BSI BS 2782-4 METH 470B |
Methods of Testing Plastics - Part 4: Chemical Properties - Method 470B: Determination of Ash of Polyalkylene Terephthalates-ISO 3451-2: 1998; |
|
BSI BS 2782-5: METHOD 520A |
Methods of testing Plastics Part 5: Optical and colour properties, weathering Method 520A: Determination of specular gloss |
|
BSI BS 2782-6: METHOD 643A |
Methods of testing Plastics Part 6: Dimensional properties Method 643A: Shrinkage on heating of film intended for shrink wrapping applications |
|
BSI BS 2782-8: METHOD 822A |
Methods of testing Plastics Part 8: Other properties Method 822A: Determination of water vapour transmission rate of plastics films (sachet method)-Replaces Methods 513C and 513D of BS 2782: 1970 |
|
BSI BS 2782-8: METHOD 826A |
Methods of testing Plastics Part 8: Other properties Method 826A: Determination of adhesion of print on plastics sheet-Read in Conjunction with BS 2782: Part 0 |
|
BSI BS 2782PT10: METH 1001 |
Methods of Testing Plastics Part 10: Glass Reinforced Plastics Method 1001: Measurement of Hardness by Means of a Barcol Impressor |
|
BSI BS 3630 PART 16 |
Methods for the Sampling and Analysis of Zinc and Zinc Alloys Part 16: Nickel in Zinc Alloys (Photometric Method)-Confirmed on 01 December 2002; |
|
BSI BS 4728 |
Determination of the Resistance to Constant Internal Pressure of Thermoplastics Pipe-Replaced by BS EN 921: 1995 |
|
BSI BS 4735 |
Laboratory Method of Test for Assessment of the Horizontal Burning Char. of Specimens No Larger Than 150 mm X 50 mm X 13 mm (Nominal) of Cellular Plastics and Cellular Rubber Materials When Subjected to a Small Flame (AMD 7687) July 15, 1993 (V)-Amd 1; |
|
BSI BS 5214 PART 2 |
Testing Machines for Rubbers and Plastics Part 2: Constant Rate of Force Application Machines-Amd 1; |
|
BSI BS 6996 |
Mineral oil resistant acrylonitrile-butadiene rubber compounds Specification-CORR 14593: September 5, 2003; |
|
BSI BS 7010 |
Code of Practice for a System of Tolerances for the Dimensions of Plastic Mouldings |
|
BSI BS 7157 |
Method of Test for Ignitability of Fabrics Used in the Construction of Large Tented Structures |
|
BSI BS EN 10016-2 |
Non-Alloy Steel Rod for Drawing and/or Cold Rolling Part 2: Specific Requirements for General Purpose Rod (V) |
|
BSI BS EN 10016-3 |
Non-Alloy Steel Rod for Drawing and/or Cold Rolling Part 3: Specific Requirements for Rimmed and Rimmed Substitute Low Carbon Steel Rod (V) |
|
BSI BS EN 10324 |
Steel wire and wire products Hose reinforcement wire-Supersedes BS 3592-2:1992 |
|
BSI BS EN 1186-13 |
Materials and articles in contact with foodstuffs Plastics Part 13: Test methods for overall migration at high temperatures-Supersedes DD ENV 1186-13: 1999; |
|
BSI BS EN 1186-6 |
Materials and Articles in Contact with Foodstuffs - Plastics - Part 6: Test Methods for Overall Migration into Olive Oil Using a Pouch-Supersedes DD ENV 1186-6: 1994; |
|
BSI BS EN 12548 |
Lead and Lead Alloys - Lead Alloy Ingots for Electric Cable Sheathing and for Sleeves-CORR 14065: August 29, 2002; CORR 16645: September 29, 2006 |
|
BSI BS EN 1394 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Apparent Initial Circumferential Tensile Strength-AMD 9905; March 15, 1998; Also Known as BS 2782: Part 12: Methods 1211A, B, C1, C2, D, E, and F: 1997 |
|
BSI BS EN 60889 |
Hard Drawn Aluminium Wire for Overhead Line Conductors-Supersedes BS 7365: 1990; |
|
BSI BS EN ISO 11501 |
Plastics Film and sheeting Determination of dimensional change on heating-AMD 15283:September 21, 2004; Renumbers BS 2782-6:Method 643B:1996 |
|
BSI BS EN ISO 2739 |
Sintered metal bushes Determination of radial crushing strength-Supersedes BS 5600 SEC 3.9: 1979 |
|
BSI BS EN ISO 294-4 |
Plastics Injection moulding of test specimens of thermoplastic materials Part 4: Determination of moulding shrinkage-CORR 14459: June 18, 2003; |
|
BSI BS EN ISO 3887 |
Steels Determination of depth of decarburization-CORR 14610: August 1, 2003; Supersedes BS 6617-1:1985 and BS 6617-2:1987; |
|
BSI BS EN ISO 4490 |
Metallic Powders - Determination of Flow Time by Means of a Calibrated Funnel (Hall Flowmeter)-CORR 13742: March 12, 2002; Supersedes BS 5600-2-6: 1985; |
|
BSI BS EN ISO 5659-2 |
Plastics - Smoke Generation - Part 2: Determination of Optical Density by a Single Chamber Test |
|
BSI BS EN ISO 642 |
Steel Hardenability Test by End Quenching (Jominy Test)-Supersedes BS 4437: 1987; |
|
BSI BS EN ISO 6603-1 |
Plastics - Determination of Puncture Impact Behaviour of Rigid Plastics - Part 1: Non-Instrumented Impact Testing |
|
BSI BS EN ISO 6603-2 |
Plastics - Determination of Puncture Impact Behaviour or Rigid Plastics - Part 2: Instrumented Puncture Testing-CORR 13758: March 15, 2002; |
|
BSI BS EN ISO 8067 |
Flexible Cellular Polymeric Materials - Determination of Tear Strength (V) |
|
BSI BS ISO 11359-2 |
Plastics - Thermomechanical Analysis (TMA) - Part 2: Determination of Coefficient of Linear Thermal Expansion and Glass Transition Temperature |
|
BSI BS ISO 4664-2 |
Rubber, vulcanized or thermoplastic Determination of dynamic properties Part 2: Torsion pendulum methods at low frequencies-:1976 |
|
BSI BS 1748 PARTS 11-12 |
Methods for the Analysis of Copper Alloys Parts 11-12: The Determination of Copper and Lead in Leaded Bronze Alloys |
|
BSI BS 1748 PARTS 1-5 |
Methods for the Analysis of Copper Alloys Parts 1-5: Determination of Copper, Lead, Iron, Aluminium and Nickel in Copper Alloys |
|
BSI BS 1748-8 |
Methods for the Analysis of Copper Alloys Part 8: Determination of Phosphorus in Copper Alloys (Photometric Method) |
|
BSI BS 1748-9 |
Methods for the Analysis of Copper Alloys Part 9: Determination of Zinc in Copper Alloys |
|
BSI BS 2782-8: METHOD 835D |
Methods of testing Plastics Part 8: Other properties Method 835D: Determination of gelation time of thermosetting resins using a hot plate |
|
BSI BS 2782PT11: METH 1109A |
Methods of Testing Plastics Part 11: Thermoplastics Pipes, Fittings and Valves Method 1109A: Resistance to Environmental Stress Cracking of Polyethylene Pipes and Fittings for Non-Pressure Applications |
|
BSI BS 2782PT11: METH 1121B |
Methods of Testing Plastics Part 11: Pipes, Fittings and Valves Method 1121B: Thermoplastics Pipes for the Conveyance of Fluids - Nominal Outside Diameters and Nominal Pressures - Metric Series-ISO 161-1: 1996; |
|
BSI BS 2782PT11: METH 1127P |
Methods of Testing Plastics Part 11: Thermoplastics Pipes, Fittings and Valves Method 1127P: Thermoplastics Pipes for the Conveyance of Fluids - Resistance to Internal Pressure - Test Method-ISO 1167: 1996; |
|
BSI BS 3828 |
Crystal Glass-Amd 1; |
|
BSI BS 3908 PART 9 |
Sampling and Analysis of Lead and Lead Alloys Part 9: Sulphur in Lead and Lead Alloys |
|
BSI BS 4023 |
Specification for Flexible cellular PVC sheeting |
|
BSI BS 4499 |
Determination of Alkali Solubility of Pulp |
|
BSI BS 4835 |
Method of Test for Plasticizer Esters |
|
BSI BS 4896 |
Determination of Ash Pulp |
|
BSI BS 6286 |
Measurement of Total or Effective Thickness of Thin Surface-Hardened Layers in Steel |
|
BSI BS 6388 PART 3 |
Accelerated Ageing for Paper and Board Part 3: Method for Moist Heat Treatment at 80 Degrees C and 65 Percent Relative Humidity-ISO 5630-3: 1996; |
|
BSI BS 6404 SEC 8.6 |
Magnetic Materials Part 8: Individual Materials Section 8.6: Soft Magnetic Metallic Materials |
|
BSI BS 6586 PART 1 |
Rigid Polyurethane (PUR) Foam Produced by the Press Injection Method Part 1: Specification for PUR Foam for Insulated Panels for Transport Containers and Insulated Vehicle Bodies |
|
BSI BS 903 PART A56 |
Methods of Testing Vulcanized Rubber Part A56: Determination of Adhesion to Wire Cord (ISO 5603: 1986) (V) |
|
BSI BS EN 10016-4 |
Non-alloy Steel Rods for Drawing and/or Cold Rolling Part 4: Specific Requirements for Rod for Special Applications (V) |
|
BSI BS EN 10036 |
Chemical Analysis of Ferrous Materials Determination of Total Carbon in Steels and Irons. Gravimetric Method After Combustion in a Stream of Oxygen (V) |
|
BSI BS EN 10249-1 |
Cold Formed Sheet Piling of Non Alloy Steels Part 1: Technical Delivery Conditions (V) |
|
BSI BS EN 10265 |
Magnetic Materials - Specification for Steel Sheet and Strip with Specified Mechanical Properties and Magnetic Permeability (V) |
|
BSI BS EN 10295 |
Heat resistant steel castings |
|
BSI BS EN 1036 |
Glass in Building - Mirrors From Silver-Coated Float Glass for Internal Use |
|
BSI BS EN 1096-2 |
Glass in Building - Coated Glass - Part 2: Requirements and Test Methods for Class A, B and S Coatings |
|
BSI BS EN 1096-3 |
Glass in Building - Coated Glass - Part 3: Requirements and Test Methods for Class C and D Coatings |
|
BSI BS EN 1186-2 |
Materials and Articles in Contact with Foodstuffs - Plastics - Part 2: Test Methods for Overall Migration into Olive Oil by Total Immersion-Supersedes DD ENV 1186-2: 1994; |
|
BSI BS EN 1186-9 |
Materials and Articles in Contact with Foodstuffs - Plastics - Part 9: Test Methods for Overall Migration into Aqueous Food Simulants by Article Filling-Supersedes DD ENV 1186-9: 1994; |
|
BSI BS EN 14782 |
Self-supporting metal sheet for roofing, external cladding and internal lining Product specification and requirements |
|
BSI BS EN 1534 |
Wood and Parquet Flooring - Determination of Resistance to Indentation (Brinell) - Test Methods |
|
BSI BS EN 1705 |
Plastics Piping Systems - Thermoplastics Valves - Test Method for the Integrity of a Valve After an External Blow-Also Known as BS 2782: Part 11: Method 1133C: 1997; |
|
BSI BS EN 2004-5 |
Test Methods for Aluminium and Aluminium Alloy Products Part 5: Determination of Cladding Thickness and Copper Diffusion of Clad Semi-Finished Products (V) |
|
BSI BS EN 233 |
Wallcoverings in Roll Form - Specification for Finished Wallpapers, Wall Vinyls and Plastics Wallcoverings |
|
BSI BS EN 576 |
Aluminium and aluminium alloys Unalloyed aluminium ingots for remelting Specifications |
|
BSI BS EN 683-1 |
Aluminium and aluminium alloys  Finstock  Part 1: Technical conditions for inspection and delivery |
|
BSI BS EN 941 |
Aluminium and Aluminium Alloys - Circle and Circle Stock for General Applications - Specifications (V) |
|
BSI BS EN ISO 11125-2 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives Part 2: Determination of Particle Size Distribution-AMD 9730: November 1997; Renumbers BS 7079: Part E7: 1994 |
|
BSI BS EN ISO 11130 |
Corrosion of Metals and Alloys - Alternate Immersion Test in Salt Solution |
|
BSI BS EN ISO 119 |
Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Phenols - Iodometric Method-AMD 10255: 10/1998; Renumbers BS 2782-4:Method 451E:1978; ISO 119: 1977 |
|
BSI BS EN ISO 14852 |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium Method by analysis of evolved carbon dioxide-AMD 15253:September 6, 2004; Renumbers BS ISO 14852:1999 |
|
BSI BS EN ISO 196 |
Wrought Copper and Copper Alloys - Detection of Residual Stress - Mercury (I) Nitrate Test (V) |
|
BSI BS EN ISO 2566-2 |
Steel - Conversion of Elongation Values - Part 2: Austenitic Steels-Supersedes BS 3894-2: 1985; |
|
BSI BS EN ISO 2580-2 |
Plastics Acrylonitrile- butadiene-styrene (ABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties-CORR 15074: March 31, 2004 |
|
BSI BS EN ISO 2740 |
Sintered metal materials, excluding hardmetals  Tensile test pieces |
|
BSI BS EN ISO 3167 |
Plastics Multipurpose test specimens |
|
BSI BS EN ISO 4638 |
Polymeric Materials, Cellular Flexible - Determination of Air Flow Permeability (V) |
|
BSI BS EN ISO 5270 |
Pulps - Laboratory Sheets - Determination of Physical Properties-Supersedes BS ISO 5270: 1998; |
|
BSI BS EN ISO 7391-1 |
Plastics - Polycarbonate (PC) Moulding and Extursion Materials - Part 1: Designation System and Basis for Specifications |
|
BSI BS EN ISO 75-3 |
Plastics Determination of temperature of deflection under load Part 3: High-strength thermosetting laminates-CORR 16417:August 31, 2006 |
|
BSI BS EN ISO 8565 |
Metals and Alloys - Atmospheric Corrosion Testing - General Requirements for Field Tests |
|
BSI BS ISO 132 |
Rubber, Vulcanized or Thermoplastic - Determination of Flex Cracking and Crack Growth (De Mattia)-CORR 13160:June 2001; Supersedes BS 903-A10: 1984 and 903-A11:1985; Also Known As BS 903-A10: 1999 |
|
BSI BS ISO 15850 |
Plastics Determination of Tension-Tension Fatigue Crack Propagation Linear Elastic Fracture Mechanics (LEFM) Approach |
|
BSI BS ISO 16151 |
Corrosion of metals and alloys Accelerated cyclic tests with exposure to acidified salt spray, “dry†and “wet†conditions |
|
BSI BS ISO 17475 |
Corrosion of metals and alloys Electrochemical test methods Guidelines for conducting potentiostatic and potentiodynamic polarization measurements-CORR 16464: June 30, 2006 |
|
BSI BS ISO 17744 |
Plastics Determination of specific volume as a function of temperature and pressure (pÆT diagram) Piston apparatus method ICS |
|
BSI BS ISO 2000 |
Rubber, raw natural Guidelines for the specification of technically specified rubber (TSR) |
|
BSI BS ISO 5350-3 |
Pulps - Estimation of Dirt and Shives Part 3: Inspection by Reflected Light |
|
BSI BS ISO 6133 |
Rubber and Plastics - Analysis of Multi-Peak Traces Obtained in Determinations of Tear Strength and Adhesion Strength-Supersedes BS 903-A47: 1982; |
|
BSI BS ISO 9772 |
Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame-AMD 15376:October 1, 2004 |
|
BSI DD ISO/TR 15235 |
Preparation of Steel Substrates before Application of Paints and Related Products - Collected Information on the Effect of Levels of Water-Soluble Salt Contamination |
|
BSI BS 1748-6 |
Method for The determination of tin in copper alloys (Nickel coil reduction method) Methods for the analysis of copper alloys |
|
BSI BS 2782PT11: METH 1121H |
Methods of Testing Plastics Part 11: Thermoplastics Pipes, Fittings and Valves Methods 1121H: Thermoplastics Pipes for the Transport of Liquids under Pressure - Calculation of Head Losses (ISO/TR 10501: 1993) (V) |
|
BSI BS 2782PT8: METH 820A |
Methods of Testing Plastics Part 8: Other Properties Method 820A: Determination of Water Vapour Transmission Rate (Dish Method) (ISO 2528: 1995) (V) |
|
BSI BS 3338-8 |
Method for The determination of bismuth in ingot tin, tin-lead solders and white metal bearing alloys (Photometric method) Methods for the sampling and analysis of tin and tin alloys |
|
BSI BS 4370 PART 3 |
Methods of Test for Rigid Cellular Materials Part 3: Methods 12 and 13 |
|
BSI BS 5409 PART 2 |
Specification for Nylon Tubing Part 2: Plasticized and Unplasticized Nylon Tubing Types 11 and 12 for Use Primarily in the Automobile Industry |
|
BSI BS 6654 |
Method for Determination of the Electrical Resistivity of Textile Floor Coverings |
|
BSI BS 7372 PART 3 |
Guide to Choice of Aperture Size and Wire Diameter Combinations for Industrial Wire Screens and Woven Wire Cloth Part 3: Preferred Combinations for Pre-Crimped or Pressure-Welded Wire Screens (ISO 4783-3: 1981) (V) |
|
BSI BS 903 PART A13 |
Physical Testing of Rubber Part A13: Method for Determination of Stiffness at Low Temperature (Gehman Test)-CORR 15210: July 6, 2004; ISO 1432:1988 |
|
BSI BS 903-A59.2 |
Physical Testing of Rubber - Part A59: Methods Using Plastimeters Section 59.2 Determination of the Plasticity Retention Index (PRI) of Raw Natural Rubber-ISO 2930: 1995 |
|
BSI BS EN 10001 |
Definition and Classification of Pig- Irons |
|
BSI BS EN 10275 |
Metallic Materials - Tube Ring Hydraulic Pressure Test |
|
BSI BS EN 12373-12 |
Aluminium and Aluminium Alloys - Anodizing - Part 12: Measurement of Reflectance Characteristics of Aluminium Surfaces Using Integrating-Sphere Instruments |
|
BSI BS EN 12373-8 |
Aluminium and Aluminium Alloys - Anodizing - Part 8: Determination of the Comparative Fastness to Ultra-Violet Light and Heat of Coloured Anodic Oxidation Coatings-Supersedes BS 6161-8: 1981; |
|
BSI BS EN 12501-2 |
Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials |
|
BSI BS EN 12659 |
Lead and Lead Alloys - Lead-Supersedes BS 334: 1982; |
|
BSI BS EN 1316-1 |
Hardwood Round Timber - Qualitative Classification - Part 1. Oak and Beech |
|
BSI BS EN 13706-1 |
Reinforced plastics composites Specifications for pultruded profiles Part 1: Designation |
|
BSI BS EN 13706-3 |
Reinforced plastics composites Specifications for pultruded profiles Part 3: Specific requirements |
|
BSI BS EN 13981-3 |
Aluminium and aluminium alloys Products for structural railway applications Technical conditions for inspection and delivery Part 3: Castings |
|
BSI BS EN 1412 |
Copper and Copper Alloys - European Numbering System (V) |
|
BSI BS EN 14220 |
Timber and wood-based materials in external windows, external door leaves and external doorframes Requirements and specifications |
|
BSI BS EN 15197 |
Wood-based panels  Flaxboards  Specifications |
|
BSI BS EN 302-6 |
Adhesives for load-bearing timber structures Test methods Part 6: Determination of the conventional pressing time |
|
BSI BS EN 326-2 |
Wood-based panels Sampling, cutting and inspection Part 2: Quality control in the factory-CORR 13318:November 20,2001; CORR 16562:September 29, 2006 |
|
BSI BS EN 351-1 |
Durability of Wood and Wood-Based Products - Preservative-Treated Solid Wood Part 1: Classification of Preservative Penetration and Retention (V) |
|
BSI BS EN 50307 |
Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables-Supersedes BS 801:1984; |
|
BSI BS EN 580 |
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT) |
|
BSI BS EN 604-2 |
Aluminium and Aluminium Alloys - Cast Forging Stock Part 2: Tolerances on Dimensions and Form |
|
BSI BS EN 610 |
Tin and Tin Alloys - Ingot Tin (V) |
|
BSI BS EN 623-3 |
Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties - Part 3: Determination of Grain Size and Size Distribution (Characterized by the Liner Intercept Method)-Supersedes DD ENV 623-3:1993; |
|
BSI BS EN 658-3 |
Advanced Technical Ceramics Mechanical Properties of Ceramic Composites at Room Temperature Part 3: Determination of Flexural Strength-Supersedes DD ENV 658-3: 1993; |
|
BSI BS EN 754-6 |
Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube Part 6: Hexagonal Bars, Tolerances on Dimensions and Form (V) |
|
BSI BS EN 821-3 |
Advanced technical ceramics Monolithic ceramics. Thermophysical properties Part 3: Determination of specific heat capacity-Supersedes DD ENV 821-3:1994 |
|
BSI BS EN ISO 10093 |
Plastics - Fire Tests - Standard Ignition Sources-Supersedes BS ISO 10093: 1994; |
|
BSI BS EN ISO 11127-3 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non-Metallic Blast-Cleaning Abrasives Part 3: Determination of Apparent Density-AMD 9848: February 1998; Renumbers BS 7079 Part F13:1994 |
|
BSI BS EN ISO 1675 |
Plastics - Liquid Resins - Determination of Density by the Pyknometer Method-Supersedes BS 2782-6: Method 620E:1980; Also Known as BS 2782-6: Method 620E: 1998 |
|
BSI BS EN ISO 1798 |
Flexible Cellular Polymeric Materials - Determination of Tensile Strength and elongation at Break-Partially Supersedes BS 4443-1: 1988; |
|
BSI BS EN ISO 8295 |
Plastics Film and sheeting Determination of the coefficients of friction-AMD 15286:September 27, 2004; Supersededs BS 2782-8:Method 824A:1984; Renumbers BS 2782-8:Method 824A:1996 |
|
BSI BS EN ISO 8307 |
Flexible Cellular Polymeric Materials - Determination of Resilience |
|
BSI BS IEC 61624 |
Guidance on the Development of Lists of Maximum Allowable Temperatures for Polymeric Compounds Used in Electrotechnical Equipment |
|
BSI BS ISO 10113 |
Metallic materials Sheet and strip Determination of plastic strain ratio |
|
BSI BS ISO 11782-2 |
Corrosion of Metal and Alloys - Corrosion Fatigue Testing - Part 2: Crack Propagation Testing Using Precracked Specimens |
|
BSI BS ISO 11844-1 |
Corrosion of metals and alloys Classification of low corrosivity of indoor atmospheres Part 1: Determination and estimation of indoor corrosivity |
|
BSI BS ISO 13899-2 |
Steel Determination of Mo, Nb and W contents in alloyed steel Inductively coupled plasma atomic emission spectrometric method Part 2: Determination of Nb content |
|
BSI BS ISO 15105-2 |
Plastics Film and sheeting Determination of gas-transmission rate Part 2: Equal-pressure method |
|
BSI BS ISO 16701 |
Corrosion of metals and alloys Corrosion in artificial atmosphere Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution |
|
BSI BS ISO 6505 |
Rubber, Vulcanized or Thermoplastic Determination of Tendency to Adhere to and Corrode Metals-Supersedes BS 903-A37:1997 |
|
BSI BS ISO 6916-1 |
Flexible Cellular Polymeric Materials - Sponge and Expanded Cellular Rubber Products - Specification Part 1: Sheeting (V) |
|
BSI PD 6577 |
Influence of Environmental Conditions on the Testing of Textile Materials (V) |
|
BSI BS 1748-7 |
Methods for the Analysis of Copper Alloys Part 7: Determination of Silicon in Copper Alloys (Photometric Method) |
|
BSI BS 2453 |
Steel Wire for Spokes-AMD 6157: May 31, 1990; |
|
BSI BS 2649 PART 1 |
Methods for the Analysis of Glass Part 1: Glasses of the Soda-Lime-Magnesia-Silica-Type |
|
BSI BS 2782-4: METHOD 451F-J |
Methods of testing Plastics Part 4: Chemical properties Method 451F: Determination of formaldehyde in phenolic mouldings (colorimetric method) Method 451G: Determination of formaldehyde in phenolic mouldings (gravimetric method) Method 451H: Determination of sulphates in phenolic mouldings Method 451J: Determination of chlorides in phenolic mouldings-Supersedes Methods 402C, 402D, 402E, 402F of BS 2782: 1970 |
|
BSI BS 2782PT11: METH 1121C |
Methods of Testing Plastics Part 11: Thermoplastics Pipes, Fittings and Valves Method 1121C: Thermoplastics Pipes for the Conveyance of Fluids - Nominal Outside Diameters and Nominal Pressures - Inch-Based Series-ISO 161-2: 1996; Together with BS ISO 4065 and BS ISO 11922-2 When Available, Will Partially Supersede BS 3867: 1987; |
|
BSI BS 2782PT3: METH 352F |
Methods of Testing Plastics Part 3: Mechanical Properties Method 352F: Determination of Impact Resistance by the Free- Falling Dart Method (Instrumented Puncture Test) (ISO 7765-2: 1994) (V) |
|
BSI BS 2782PT3: METH 365A |
Methods of Testing Plastics Part 3: Mechanical Properties Method 365A: Determination of Softness Number of Flexible Plastics Materials |
|
BSI BS 3338-3 |
Method for The determination of antimony in ingot tin (Photometric method) Methods for the sampling and analysis of tin and tin alloys-AMD : August, 1961; AMD 4666: October, 1962 |
|
BSI BS 3907-1 |
Methods for The determination of aluminium in magnesium alloys (Gravimetric method) Methods for the analysis of magnesium and magnesium alloys |
|
BSI BS 4249 |
Paper and Cork/Paper Jointing |
|
BSI BS 4549 PART 1 |
Quality Control Requirements for Reinforced Plastic Mouldings Part 1: Guide to the Preparation of a Scheme to Control the Quality of Glass Reinforced Polyester Mouldings |
|
BSI BS 4840 PART 1 |
Rigid Polyurethane (PUR) Foam in Slab Form Part 1: PUR Foam for Use in Transport Containers and Insulated Vehicle Bodies |
|
BSI BS 633 |
Cotton Selvedge Tapes and Webbing for Electrical Purposes |
|
BSI BS 6564-3 |
Polytetrafluoroethylene (PTFE) Materials and Products - Part 3: Specification for E Glass Fibre Filled Polytetrafluoroethylene |
|
BSI BS 6635 |
Manufacture of saddle trees made from wood Specification |
|
BSI BS 7442 SEC 4.2 |
Rubber or Plastics Covered Rollers Part 4: Requirements Section 4.2: Classification by Surface Finish (V) |
|
BSI BS 903 PART 2 |
Physical Testing of Rubber Part 2: Guide to the Application of Statistics to Rubber Testing-Supersedes BS 5324: 1976; |
|
BSI BS 903 PART A52 |
Methods of Testing Vulcanized Rubber Part A52: Determination of Aging Characteristics by Measurement of Stress at a Given Elongation |
|
BSI BS EN 1001-1 |
Durability of wood and wood-based products Terminology Part 1: List of equivalent terms-Supersedes BS 6559: 1989 |
|
BSI BS EN 1001-2 |
Durability of wood and wood based products Terminology Part 2: Vocabulary |
|
BSI BS EN 10294-1 |
Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloys steels |
|
BSI BS EN 1186-11 |
Materials and articles in contact with foodstuffs Plastics Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides-Supersedes DD ENV 1186-11: 1995; |
|
BSI BS EN 1186-5 |
Materials and Articles in Contact with Foodstuffs - Plastics - Part 5: Test Methods for Overall Migration into Aqueous Food Simulants by Cell-Supersedes DD ENV 1186-5: 1994; |
|
BSI BS EN 1193 |
Timber Structures - Structural Timber and Glued Laminated Timber - Determination of Shear Strength and Mechanical Properties Perpendicular to the Grain |
|
BSI BS EN 12280-2 |
Rubber- or Plastic-Coated Fabrics - Accelerated Ageing Tests Part 2: Physical Ageing: Effect of Light or Weathering |
|
BSI BS EN 12373-14 |
Aluminium and Aluminium Alloys - Anodizing - Part 14: Visual Determination of Image Clarity of Anodic Oxidation Coatings - Chart Scale Method-Supersedes BS 6161-13:1993; |
|
BSI BS EN 13920-1 |
Aluminium and aluminium alloys Scrap Part 1: General requirements, sampling and tests |
|
BSI BS EN 14221 |
Timber and wood-based materials in internal windows, internal door leaves and internal doorframes Requirements and specifications |
|
BSI BS EN 14598-2 |
Reinforced thermosetting moulding compounds Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) Part 2: Methods of test and general requirements-CORR 16460:June 30, 2006; Together with BS EN 14598-1 and BS EN 14598-3:2005 supersedes BS 5734-1 thru BS 5734-4:1990 |
|
BSI BS EN 1780-3 |
Aluminium and aluminium alloys Designation of alloyed aluminium ingots for remelting, master alloys and castings Part 3: Writing rules for chemical composition |
|
BSI BS EN 3207 |
Rubber Compounds - Technical Specification |
|
BSI BS EN 350-1 |
Durability of Wood and Wood-Based Products - Natural Durability of Solid Wood Part 1: Guide to the Principles of Testing and Classification of the Natural Durability of Wood (V) |
|
BSI BS EN 549 |
Rubber Materials for Seals and Diaphragms for Gas Appliances and Gas Equipment (V) |
|
BSI BS EN 601 |
Aluminium and Aluminium Alloys - Castings - Chemical Composition of Castings for Use in Contact with Food (V) |
|
BSI BS EN 658-2 |
Advanced technical ceramics Mechanical properties of ceramic composites at room temperature Part 2: Determination of compression properties-Supersedes DD ENV 658-2:1993; |
|
BSI BS EN 683-2 |
Aluminium and aluminium alloys  Finstock  Part 2: Mechanical properties |