|
BSI BS EN 821-1 |
Advanced Technical Ceramics - Monolithic Ceramics - Thermo- Physical Properties - Part 1: Determination of Thermal Expansion (V) |
|
BSI BS EN 821-2 |
Advanced Technical Ceramics - Monolithic Ceramics - Thermo- Physical Properties - Part 2: Determination of Thermal Diffusivity by the Laser Flash (or Heat Pulse) Method-Supersedes BS 7134: Section 4.2: 1990; |
|
BSI BS EN 988 |
Zinc and Zinc Alloys - Specification for Rolled Flat Products for Building-Supersedes BS 6561: 1985 |
|
BSI BS EN ISO 10082 |
Plastics - Phenolic Resins - Classification and Test Methods |
|
BSI BS EN ISO 10350-1 |
Plastics - Acquisition and Presentation of Comparable Single-Point Data - Part 1: Moulding Materials-Supersedes BS EN ISO 10350: 1995; |
|
BSI BS EN ISO 11127-4 |
Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 4: Assessment of hardness by a glass slide test-AMD 9849: February 1998; Renumbers BS 7079: Part F14: 1994 |
|
BSI BS EN ISO 13760 |
Plastics Pipes for the Conveyance of Fluids Under Pressure - Miner's Rule - Calculation Method for Cumulative Damage |
|
BSI BS EN ISO 14855 |
Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions Method by analysis of evolved carbon dioxide-AMD 15250:August 31, 2004; Renumbers BS ISO 14855:1999 |
|
BSI BS EN ISO 1600 |
Plastics - Cellulose Acetate - Determination of Light Absorption on Moulded Specimens Produced Using Different Periods of Heating-AMD 10600: 11/1999; Renumbers BS 2782-5: Meth 553A:1991 |
|
BSI BS EN ISO 2555 |
Plastics - Resins in the Liquid State or as Emulsions or Dispersions - Determination of Apparent Viscosity by the Brookfield Test Method-AMD 10724: Febuary 2000; Renumbers BS 2782-7 Method 730C: 1992 |
|
BSI BS EN ISO 2818 |
Plastics - Preparation of Test Specimens by Machining-AMD 9487: June 1997; Supersedes BS 2782: Part 9: Method 930A: 1977; Renumbers BS 2782: Part 9: Method 930A: 1996 |
|
BSI BS EN ISO 3001 |
Plastics - Epoxy Compounds - Determination of Epoxy Equivalent-Supersedes BS 2782-4: Methods 433C and 433D: 1997; |
|
BSI BS EN ISO 3386-2 |
Flexible Cellular Polymeric Materials - Determination of Stress-Strain Characteristics in Compression - Part 2: High-Density Materials-Supersedes Method 5B of BS 4443-1: 1988; |
|
BSI BS EN ISO 3928 |
Sintered metal materials, excluding hardmetals Fatigue test pieces-AMD 16279: August 31, 2006;: 1999; (Supesedes BS 5600-3-3.10): 1979 |
|
BSI BS EN ISO 4610 |
Plastics - Vinyl Chloride Homopolymer and Copolymer Resins - Sieve Analysis Using Air-Jet Sieve Apparatus-CORR 13756: March 15, 2002; |
|
BSI BS EN ISO 9080 |
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation-CORR 14620; August 19, 2003; |
|
BSI BS ISO 15985 |
Plastics Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions Method by analysis of released biogas |
|
BSI BS ISO 16770 |
Plastics Determination of environmental stress cracking (ESC) of polyethylene Full-notch creep test (FNCT) |
|
BSI BS ISO 1922 |
Rigid Cellular Plastics - Determination of Shear Strength-AMD 13585:December 11, 2001; |
|
BSI BS ISO 23718 |
Metallic materials  Mechanical testing  Vocabulary |
|
BSI BS ISO 3585 |
Borosilicate Glass 3.3 - Properties-CORR 10359; May 2000; |
|
BSI BS ISO 4665 |
Rubber, vulcanized or thermoplastic Resistance to weathering |
|
BSI BS ISO 7229 |
Rubber- or Plastics-Coated Fabrics - Measurements of Gas Permeability |
|
BSI DD CEN/TR 10347 |
Guidance for forming of structural steels in processing |
|
BSI PD ISO/TR 7620 |
Rubber materials Chemical resistance |
|
BSI BS 1683 |
Coated Aluminium Foil for Wrapping Processed Cheese |
|
BSI BS 1728-1 |
Method for The determination of copper in aluminium and aluminium alloys-AMD: June, 1951 |
|
BSI BS 1728-12 |
Method for the determination of Silicon in aluminium & aluminium alloys (absorptiometric molybdenum blue method) Methods for the analysis of aluminium& aluminium alloys-AMD 4423: January, 1962 |
|
BSI BS 2649 PART 3 |
Methods for the Analysis of Glass Part 3: Glasses of the Potassium Oxide-Lead Oxide-Silica Type |
|
BSI BS 2782-4: METHOD 452B |
Methods of testing Plastics Part 4: Chemical properties Method 452B: Determination of carbon black content of polyolefin compound |
|
BSI BS 2782PT10: METH 1002 |
Methods of Testing Plastics Part 10: Glass Reinforced Plastics Method 1002: Determination of Loss on Ignition-Amd 1; |
|
BSI BS 2782PT11: METH 1150E |
Methods of Testing Plastics Part 11: Thermoplastics Pipes, Fittings and Valves Method 1150E: Plastics Pipes and Fittings - Preparation of Test Piece Assemblies between a Polyethylene (PE) Pipe and an Electrofusion Fitting-ISO 11413:1996 |
|
BSI BS 2782PT7: METH 720B |
Methods of Testing Plastics Part 7: Rheological Properties Method 720B: Cup Flow of Phenolic and Alkyd Moulding Materials |
|
BSI BS 2782PT7: METH 740C |
Methods of Testing Plastics Part 7: Rheological Properties Method 740C: Polymer Dispersions - Determination of White Point Temperature and Minimum Film-Forming Temperature (ISO 2115: 1996) (W) |
|
BSI BS 3396 PART 2 |
Woven Glass Fibre Fabrics for Plastics Reinforcement Part 2: Desized Fabrics |
|
BSI BS 375 |
Refined Nickel |
|
BSI BS 5139 |
Method of Specifying General Purpose Polypropylene and Propylene Copolymer Materials for Moulding and Extrusion |
|
BSI BS 6200 SEC 2.2 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 2: Sampling and Sample Preparation Section 2.2: Methods for Ferroalloys and Other Alloying Additives (V) |
|
BSI BS 7372 PART 2 |
Guide to Choice of Aperture Size and Wire Diameter Combinations for Industrial Wire Screens and Woven Wire Cloth Part 2: Preferred Combinations for Woven Wire Cloth |
|
BSI BS 7442 PART 0 |
Rubber or Plastics Covered Rollers Part 0: Introduction |
|
BSI BS 7900 |
Examination of the Surface Texture of Precision Steel Castings |
|
BSI BS 903 PART A40 |
Methods of Testing Vulcanized Rubber Part A40: Determination of Adhesion to Rigid Materials Using Conical Shaped Parts |
|
BSI BS EN 10092-2 |
Hot rolled spring steel flat bars Part 2: Ribbed and grooved spring leaves Dimensions and tolerances on shape and dimensions |
|
BSI BS EN 10184 |
Chemical Analysis of Ferrous Materials - Determination of Phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method |
|
BSI BS EN 10325 |
Steel Determination of yield strength increase by the effect of heat treatment [Bake-Hardening-Index] |
|
BSI BS EN 10341 |
Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state-Supersedes BS EN 10126:1996 and BS EN 10165:1996 |
|
BSI BS EN 1055 |
Plastics Piping Systems - Thermoplastics Piping Systems for Soil and Waste Discharge Inside Buildings - Test Method for Resistance to Elevated Temperature Cycling-Also Known as BS 2782-11: Method 1111A:1996 |
|
BSI BS EN 1084 |
Plywood - Formaldehyde Release Classes Determined by the Gas Analysis Method (V) |
|
BSI BS EN 1120 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Determination of the Resistance to Chemical Attack from the Inside of a Section in a Deflected Condition (V) |
|
BSI BS EN 1186-10 |
Materials and articles in contact with foodstuffs Plastics Part 10: Test methods for overall migration into olive oil (modified method for use in cases where incomplete extraction of olive oil occurs)-Supersedes DD ENV 1186-10: 1994; |
|
BSI BS EN 1186-8 |
Materials and Articles in Contact with Foodstuffs - Plastics - Part 8: Test Methods for Overall Migration into Olive Oil by Article Filling-Supersedes DD ENV 1186-8: 1994; |
|
BSI BS EN 1194 |
Timber Structures - Glued Laminated Timber - Strength Classes and Determination of Characteristic Values |
|
BSI BS EN 12100 |
Plastics Piping Systems - Polyethylene (PE) Valves - Test Method for Resistance to Bending between Supports-Also Known as BS 2782-11: METH 1133D: 1997 |
|
BSI BS EN 12280-3 |
Rubber - or Plastic-Coated Fabrics Accelerated Ageing Tests Part 3: Environmental Ageing |
|
BSI BS EN 12373-10 |
Aluminium and Aluminium Alloys - Anodizing - Part 10: Measurement of Mean Specific Abrasion Resistance of Anodic Oxidation Coatings Using an Abrasive Jet Test Apparatus-Supersedes BS 6161-10: 1987; |
|
BSI BS EN 12373-15 |
Aluminium and Aluminium Alloys - Anodizing - Part 15: Assessment of Resistance of Anodic Oxidation Coatings to Cracking by Deformation |
|
BSI BS EN 12373-7 |
Aluminium and Aluminium Alloys - Anodizing - Part 7: Assessment of Quality of Sealed Anodic Oxidation Coatings by Measurement of the Loss of Mass After Immersion in Phosphoric Acid/Chromic Acid Solution with Prior Acid Treatment |
|
BSI BS EN 13706-2 |
Reinforced plastics composites Specifications for pultruded profiles Part 2: Method of test and general requirements |
|
BSI BS EN 380 |
Timber Structures - Test Methods - General Principles for Static Load Testing (V) |
|
BSI BS EN 384 |
Structural timber Determination of characteristic values of mechanical properties and density |
|
BSI BS EN 754-4 |
Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube Part 4: Square Bars, Tolerances on Dimensions and Form (V) |
|
BSI BS EN ISO 2114 |
Plastics (Polyester Resins) and Paints and Varnishes (Binders) - Determination of Partial Acid Value and Total Acid Value-CORR 13829:April 3,2002; Also Known as BS 2782-4:Method 432B:2000 |
|
BSI BS EN ISO 2580-1 |
Plastics Acrylonitrilebutadiene- styrene (ABS) moulding and extrusion materials Part 1: Designation system and basis for specifications-CORR 14254: December 5, 2002; |
|
BSI BS EN ISO 3738-2 |
Hardmetals Rockwell hardness test (scale A) Part 2: Preparation and calibration of standard test blocks |
|
BSI BS EN ISO 4545-1 |
Metallic materials Knoop hardness test Part 1: Test method |
|
BSI BS EN ISO 4545-4 |
Metallic materials Knoop hardness test Part 4: Table of hardness values |
|
BSI BS EN ISO 4590 |
Rigid cellular plastics Determination of the volume percentage of open cells and of closed cells |
|
BSI BS EN ISO 4934 |
Steel and iron Determination of sulfur content Gravimetric method-Supersedes BS 6200-3.28.1:1985 |
|
BSI BS EN ISO 7384 |
Corrosion Tests in Artificial Atmospheres - General Requirements-Supersedes BS 6917: 1987 |
|
BSI BS EN ISO 7391-2 |
Plastics - Polycarbonate (PC) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties-AMD 10746: 7/2000; Renumbers BS ISO 7391-2:1997 |
|
BSI BS EN ISO 8491 |
Metallic materials Tube (in full section) Bend test-Supersedes BS EN 10232:1994 |
|
BSI BS EN ISO 9967 |
Thermoplastics Pipes - Determination of Creep Ratio (V) |
|
BSI BS ISO 10270 |
Corrosion of Metals and Alloys - Aqueous Corrosion Testing of Zirconium Alloys for Use in Nuclear Power Reactors |
|
BSI BS ISO 11534 |
Iron ores  Determination of tin  Flame atomic absorption spectrometric method |
|
BSI BS ISO 4498 |
Sintered metal materials, excluding hardmetals Determination of apparent hardness and microhardness-:1984 |
|
BSI BS ISO 7270-1 |
Rubber Analysis by pyrolytic gas-chromatographic methods Part 1: Identification of polymers (single polymers and polymer blends) |
|
BSI BS 1322 |
Aminoplastic Moulding Materials (ISO 2112: 1990) |
|
BSI BS 1728-16 |
Method for The determination of chromium in aluminium and aluminium alloys (Photometric method) Methods for the analysis of aluminium and aluminium alloys |
|
BSI BS 1728-17 |
Methods for the Analysis of Aluminium and Aluminium Alloys: Part 17: Chromium (Volumetric Method) |
|
BSI BS 1728-22 |
Method for The determination of magnesium in aluminium and aluminium alloys (volumetric CDTA method) |
|
BSI BS 1728-5 |
Method for The determination of copper in aluminium and aluminium alloys (Absorptiometric method) Methods for the analysis of aluminium and aluminium alloys-AMD 5267: June, 1964 |
|
BSI BS 2782PT1: METH 131C-D |
Methods of Testing Plastics Part 1: Thermal Properties Method 131C-D: Crushing Strength After Heating (Heat Resistance) of Thermosetting (C) Moulding Material. (D) Laminated Sheet or Mouldings. |
|
BSI BS 2782PT10: METH 1006 |
Methods of Testing Plastics Part 10: Glass Reinforced Plastics Method 1006: Determination of Volatile Matter and Resin Content of Synthetic Resin-Impregnated Textile Glass Fibre-Replaces Methods 107H and 107J of BS 2782: 1970 |
|
BSI BS 2782PT3: METH 323A |
Methods of Testing Plastics Part 3: Mechanical Properties Method 323A: Tensile Vibration - Non-Resonance Method (ISO 6721-4: 1994) (V) |
|
BSI BS 2782PT4: METH 432D |
Methods of Testing Plastics Part 4: Chemical Properties Method 432D: Determination of Styrene Evaporation from Unsaturated Polyester Resins (V) |
|
BSI BS 2782PT4: METH 433A |
Methods of Testing Plastics Part 4: Chemical Properties Method 433A: Determination of Inorganic Chlorine in Epoxide Resins and Glycidyl Esters |
|
BSI BS 2782PT4: METH 451A |
Methods of Testing Plastics Part 4: Chemical Properties Method 451A: Determination of Acetone-Soluble Matter in Phenolic Mouldings |
|
BSI BS 2782PT4: METH 451B |
Methods of Testing Plastics Part 4: Chemical Properties Method 451B: Determination of Acetone-Soluble Matter in Phenolic Moulding Materials After Moulding |
|
BSI BS 2782PT6: METH 632A |
Methods of Testing Plastics Part 6: Dimensions Properties Method 632A: Determination of Length and Width of Flexible Sheet (ISO 4592: 1992) |
|
BSI BS 2782PT7: METH 732F |
Methods of Testing Plastics Part 7: Rheological Properties Method 732F: Determination of Viscosity Number of Methyl Methacrylate Polymers (ISO 1628-6: 1990) (Read in Conjunction with BS 2782: Part 0) |
|
BSI BS 2782PT8: METH 823A-B |
Methods of Testing Plastics Part 8: Other Properties Method 823A and 823B: Methods for the Assessment of Carbon Black Dispersion in Polyethylene Using a Microscope |
|
BSI BS 2782PT9: METH 940A |
Methods of Testing Plastics Part 9: Sampling and Test Specimen Preparation Method 940A: Preparation of Test Specimens of Amorphous Thermoplastics in the Form of Bars with a Specified Version-Read in Conjunction with BS 2782: Part 0 |
|
BSI BS 2924 PART 2 |
Aqueous Extracts of Paper, Board and Pulp Part 2: Determination of Conductivity (ISO 6587: 1992) |
|
BSI BS 2975-1 |
Sampling and analysis of glass-making sands- Part 1:Methods for sampling and physical testing of glass-making sands-Supersedes BS 2975:1988 |
|
BSI BS 3338-14 |
Method for The sampling of white metal bearing alloy ingots Methods for the sampling and analysis of tin and tin alloys |
|
BSI BS 3338-15 |
Method for The determination of copper and lead in white metal bearing alloys (Electrodeposition method) Methods for the sampling and analysis of tin and alloys |
|
BSI BS 3338-20 |
Method for The determination of nickel in capping metal (Photometric method) Methods for the sampling and analysis of tin and tin alloys |
|
BSI BS 3338-6 |
Method for The determination of copper in high purity ingot tin (Photometric method) Methods for the sampling and analysis of tin and tin alloys |
|
BSI BS 3338-9 |
Method for The determination of arsenic in ingot tin, solders and white metal bearing alloys (Photometric method) Methods for the sampling and analysis of tin and tin alloys |
|
BSI BS 3502 PART 3 |
Symbols for Plastics and Rubber Materials Part 3: Schedule for Symbols for Compounding Ingredients (V) |
|
BSI BS 3564 |
Method for the Size-Grading of Muscovite Mica Blocks, Thins and Films |
|
BSI BS 3907-3 |
Methods for The determination of copper in magnesium and magnesium alloys (Photometric method) Methods for the analysis of magnesium and magnesium alloys |
|
BSI BS 3908 PART 10 |
Sampling and Analysis of Lead and Lead Alloys Part 10: Antimony in Lead Alloys (Titrimetric Method) |
|
BSI BS 4420 |
Determination of the Bendtsen Roughness of Paper and Board |
|
BSI BS 4496 |
Determination of Acid-Insoluble Ash in Pulp |
|
BSI BS 4818 |
Method for Determination of the Creasing Quality of Carton Board (PIRA Method) |
|
BSI BS 6043 SEC 1.4 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.4: Determination of Content of Toluene-Insoluble Material |
|
BSI BS 6057 SECTION 1.1 |
Rubber Latices Part 1: Specification and Coding Section 1.1: Specification for Centrifuged or Creamed, Ammonia-Preserved Natural Rubber Latices-ISO 2004: 1997; |
|
BSI BS 6200 SUB SEC 3.16.3 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.16: Determination of Lead Subsection 3.16.3: Steel: Spectrophotometric Method for Trace Amounts-Replaces BS Handbook 19; |
|
BSI BS 6200-3.0 |
Sampling and analysis of iron, steel and other ferrous metals Part 3.0: Reference methods of analysis Summary of methods-CORR 14235: November 21, 2002; |
|
BSI BS 6306 PART 2 |
Determination of Limiting Viscosity Number of Cellulose in Dilate Solutions Part 2: Iron (III) Sodium Tartrate Complex (EWNN Model NaCI Method) |
|
BSI BS 7164 PART 10 |
Chemical Tests for Raw and Vulcanized Rubber Part 10: Method for Preparation and Examination of Water Extract (V) |
|
BSI BS 7442 SEC 4.1 |
Rubber or Plastics Covered Rollers Part 4: Requirements Section 4.1: Specification for Apparent Hardness |
|
BSI BS 7545 |
Method for Removal of Corrosion Products from Corrosion Test Specimens of Metals and Alloys (ISO 8407: 1991) |
|
BSI BS 903 PART A27 |
Methods of Testing Vulcanized Rubber Part A27: Determination of Rubber to Fabric Adhesion: Direct Tension Method |
|
BSI BS 903-A60.1 |
Physical Testing of Rubber - Part A60.1: Curemetering - Guide to the Use of Curemeters-CORR 10887; April 2000; ISO 6502: 1999 |
|
BSI BS EN 10276-1 |
Chemical Analysis of Ferrous Materials - Determination of Oxygen in Steel and Iron - Part 1: Sampling and Preparation of Steel Samples for Oxygen Determination |
|
BSI BS EN 10304 |
Magnetic Materials (Iron and Steel) for Use in Relays-Supersedes BS 6404-8.10:1995; |
|
BSI BS EN 1072 |
Plywood - Description of Bending Properties for Structural Plywood (V) |
|
BSI BS EN 12118 |
Plastics Piping Systems - Determination of Moisture Content in Thermoplastics by Coulometry-Also Numbered as BS 2782: Part 11: Method 1103C: 1998; |
|
BSI BS EN 12294 |
Plastics Piping Systems - Systems for Hot and Cold Water - Test Method for Leaktightness under Vacuum-Also Known as BS 2782-11: Method 1123V:2000; |
|
BSI BS EN 12392 |
Aluminium and Aluminium Alloys - Wrought Products - Special Requirements for Products Intended for the Production of Pressure Equipment |
|
BSI BS EN 12438 |
Magnesium and Magnesium Alloys - Magnesium Alloys for Cast Anodes |
|
BSI BS EN 12441-1 |
Zinc and zinc alloys Chemical analysis Part 1: Determination of aluminium in zinc alloys Titrimetric method-AMD 15354:August 26, 2004; Supersedes BS 3630-6:1965 |
|
BSI BS EN 13017-1 |
Solid Wood Panels - Classification by Surface Appearance - Part 1: Softwood |
|
BSI BS EN 1310 |
Round and Sawn Timber - Method of Measurement of Features |
|
BSI BS EN 1311 |
Round and Sawn Timber - Method of Measurement of Biological Degrade |
|
BSI BS EN 1315-1 |
Dimensional Classification - Part 1. Hardwood Round Timber |
|
BSI BS EN 13566-2 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Part 2: Lining with continuous pipes |
|
BSI BS EN 14081-2 |
Timber structures Strength graded structural timber with rectangular cross section Part 2: Machine grading; additional requirements for initial type testing-Together with BS EN 14081-1: 2005 and BS EN 14081-3: 2005 supersede BS EN 518: 1995 and BS EN 519: 1995 |
|
BSI BS EN 14598-1 |
Reinforced thermosetting moulding compounds Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) Part 1: Designation-Together with BS EN 14598-2:2005 and BS EN 14598-3:2005 supersedes BS 5734-1 thru BS 5734-4:1990 |
|
BSI BS EN 1758 |
Copper and Copper Alloys - Strip for Lead Frames-CORR 10197: September 15, 1998; |
|
BSI BS EN 2103 PART 2 |
Steel, Nickel Base and Cobalt Base Alloy Remelting Stock and Castings. Technical Specification Part 2: Remelting Stock (V) |
|
BSI BS EN 2260 |
Silicone Rubber (VMQ) Hardness 60 IRHD (V) |
|
BSI BS EN 26501 |
Ferronickel - Specification and Delivery Requirements (ISO 6501: 1988) (AMD 7390) September 15, 1992-Amd 1; |
|
BSI BS EN 279 |
Homogenous Rubber Materials for Dynamic Seals in Domestic Appliances Using Combustible Gases up to 200 mbar |
|
BSI BS EN 387 |
Glued Laminated Timber - Large Finger Joints - Performance Requirements and Minimum Production Requirements-Supersedes DD ENV 387: 1999; |
|
BSI BS EN 658-1 |
Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at Room Temperature - Part 1: Determination of Tensile Properties-Supersedes DD ENV 658-1: 1993; |
|
BSI BS EN 715 |
Thermoplastics Piping Systems - End-Load- Bearing Joints Between Small Diameter Pressure Pipes and Fittings - Test Method for Leaktightness Under Internal Water Pressure, Including End Thrust(V) |
|
BSI BS EN 723 |
Copper and Copper Alloys - Combustion Method for Determination of Carbon on the Inner Surface of Copper Tubes or Fittings |
|
BSI BS EN 789 |
Timber Structures - Test Methods - Determination of Mechanical Properties of Wood Based Panels |
|
BSI BS EN ISO 11125-4 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives Part 4: Determination of Apparent Density-AMD 9728: November 1997; Renumbers BS 7079: Part E9: 1994 |
|
BSI BS EN ISO 11125-6 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives Part 6: Determination of Foreign Matter-AMD 9726: November 1997; Renumbers BS 7079: Part E11: 1994 |
|
BSI BS EN ISO 12086-2 |
Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties-CORR 16756: November 30, 2006 |
|
BSI BS EN ISO 12677 |
Chemical analysis of refractory products by XRF Fused cast bead method-CORR 14581: July 14, 2003; |
|
BSI BS EN ISO 14577-2 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines-CORR 14430: April 3, 2003; |
|
BSI BS EN ISO 14631 |
Extruded Sheets of Impact-Modified Polystyrene (PS-I) - Requirements and Test Methods |
|
BSI BS EN ISO 22088-4 |
Plastics Determination of resistance to environmental stress cracking (ESC) Part 4: Ball or pin impression method-:1998 |
|
BSI BS EN ISO 294-2 |
Plastics Injection moulding of test specimens of thermoplastic materials Part 2: Small tensile bars-AMD 10234: October 1998; AMD 16121: April 28, 2006; Renumbers BS 294-2: 1998 |
|
BSI BS EN ISO 294-3 |
Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates |
|
BSI BS EN ISO 4545-2 |
Metallic materials Knoop hardness test Part 2: Verification and calibration of testing machines |
|
BSI BS EN ISO 4613-1 |
Plastics - Ethylene/Vinyl Acetate (E/VAC) Moulding and Extrusion Materials - Part 1: Designation and Specification |
|
BSI BS EN ISO 8256 |
Plastics Determination of tensile-impact strength |
|
BSI BS EN ISO 899-1 |
Plastics Determination of creep behaviour Part 1: Tensile creep-CORR 14606: July 31, 2003; |
|
BSI BS EN ISO 9396 |
Plastics - Phenolic Resins - Determination of the Gel Time at a Given Temperature Using Automatic Apparatus |
|
BSI BS EN ISO 9773 |
Plastics Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source-CORR 14881:December 3, 2003; AMD 15375:October 21, 2004; Supersedes BS 2782-1:Method 140B:1993 |
|
BSI BS ISO 10931-1 |
Plastics Piping Systems for Industrial Applications - Poly(Vinylidene Fluoride) Part 1: General |
|
BSI BS ISO 10931-3 |
Plastics Piping Systems for Industrial Applications - Poly(Vinylidene Fluoride) Part 3: Fittings |
|
BSI BS ISO 11345 |
Rubber Assessment of carbon black and carbon black/silica dispersion Rapid comparative methods |
|
BSI BS ISO 11752 |
Flexible cellular polymeric materials  Moulded and extruded sponge or expanded cellular rubber products  Compressibility test on finished parts-AMD 17089: May 31, 2007 |
|
BSI BS ISO 11846 |
Corrosion of Metals and Alloys - Determination of Resistance to Intergranular Corrosion of Solution Heat- Treatable Aluminium Alloys |
|
BSI BS ISO 12000 |
Plastics/Rubber - Polymer Dispersions and Rubber Latices (Natural and Synthetic) - Definitions and Review of Test Methods |
|
BSI BS ISO 16220 |
Magnesium and magnesium alloys Magnesium alloy ingots and castings |
|
BSI BS ISO 16468 |
Investment castings (steel, nickel alloys and cobalt alloys) General technical requirements |
|
BSI BS ISO 2028 |
Synthetic Rubber Latex - Preparation of Dry Polymer-Supersedes BS 6057-3.16: 1990; |
|
BSI BS ISO 22498 |
Plastics Vinyl chloride homopolymer and copolymer resins Particle size determination by mechanical sieving |
|
BSI BS ISO 22768 |
Rubber, raw Determination of the glass transition temperature by differential scanning calorimetry (DSC) |
|
BSI BS ISO 3011 |
Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Ozone Cracking under Static Conditions |
|
BSI BS ISO 3342 |
Textile Glass - Mats - Determination of Tensile Breaking Force (V) |
|
BSI BS ISO 5794-1 |
Rubber compounding ingredients Silica, precipitated, hydrated Part 1: Non-rubber tests |
|
BSI DD 139 |
Zinc-Aluminium Alloy Ingots and Casting |
|
BSI DD ENV 14138 |
Lead and Lead Alloys - Analysis by Flame Atomic Absorption Spectrometry (FAAS) or Inductively Coupled Plasma Emissions Spectrometry (ICP-ES), After Separation by Co-Precipitation |
|
BSI DD ISO/TS 13899-3 |
Steel Determination of Mo, Nb and W contents in alloyed steel Inductively coupled plasma atomic emission spectrometric method Part 3: Determination of W content |
|
BSI BS 1728-11 |
Method for The determination of silicon in aluminium and aluminium alloys (Perchloric acid method) Methods for the analysis of aluminiumand aluminium alloys |
|
BSI BS 1728-21 |
Methods for the Analysis of Aluminium and Aluminium Alloys: Part 21: Zinc (Atomic Absorption Method) |
|
BSI BS 1728-25 |
Methods for the Analysis of Aluminium and Aluminium Alloys: Part 25: Titanium (Spectrophotometric Chromotropic Acid Method) |
|
BSI BS 2782PT1: METH 153B |
Methods of Testing Plastics Part 1: Thermal Properties Method 153B: Determination of Stiffness in Torsion of Flexible Materials (Method for Vinyl Chloride Compounds) (ISO 458-2: 1985) |
|
BSI BS 2782PT3: METH 332A |
Methods of Testing Plastics Part 3: Mechanical Properties Method 332A: Stiffness of Plastics Film |
|
BSI BS 2782PT4: METH 432A |
Methods of Testing Plastics Part 4: Chemical Properties Method 432A: Determination of of Residual Styrene Monomer Content in Reinforced Plastics Based on Unsaturated Polyester Resins-Read in Conjunction with BS 2782: Part 0; ISO 4901: 1985 |
|
BSI BS 2782PT6: METH 621D |
Methods of Testing Plastics Part 6: Dimensional Properties Method 621D: Determination of Compacted Apparent Bulk Density of PVC Resins |
|
BSI BS 2782PT6: METH 640A |
Methods of Testing Plastics Part 6: Dimensional Properties Method 640A: Determination of Shrinkage Test of Specimens in the Form of Bars of Compression Moulding Thermosetting Moulding Materials-Replaces Methods 106A to 106E of BS 2782: 1970 |
|
BSI BS 2782PT6: METH 641A |
Methods of Testing Plastics Part 6: Dimensional Properties Method 641A: Determination of Dimensional Stability at 100 Degrees Celsius of Flexible Polyvinyl Chloride Sheet-AMD 6282; February 28, 1991; Replaces Method 106F of BS 2782: 1970 |
|
BSI BS 2924 PART 1 |
Aqueous Extracts of Paper, Board and Pulp Part 1: Method for Determination of pH-Partially Superseded by BS ISO 6588-1: 2005 |
|
BSI BS 3338 PART 2 |
Methods for the Sampling and Analysis of Tin and Tin Alloys Part 2: Method for the Determination of Tin in Ingot Tin (Aluminium Reduction Method)-AMD 7163: June 15, 1992 |
|
BSI BS 3338-13 |
Method for The determination of antimony in solders and white metal bearing alloys (Volumetric: potassium bromate method) Methods for the sampling and analysis of tin and tin alloys |
|
BSI BS 3338-16 |
Method for The determination of tin in white metal bearing alloys (Nickel coil reduction method) Methods for the sampling and analysis of tin and tin alloys |
|
BSI BS 3338-21 |
Methods for the sampling and analysis of tin and tin alloys Part 21: Determination of high cadmium content of soft solders |
|
BSI BS 3338-7 |
Method for The determination of silver in solders (Volumetric: ammonium thiocyanate method) Methods for the sampling and analysis of tin and tin alloys |
|
BSI BS 3907-12 |
Methods for The determination of aluminium in magnesium and magnesium alloys (Photometric method) Methods for the analysis of magnesium and magnesium alloys |
|
BSI BS 3907-13 |
Methods for The determination of tin in magnesium and magnesium alloys (Photometric method) Methods for the analysis of magnesium and magnesium alloys |
|
BSI BS 3907-15 |
Methods for The analysis of magnesium and magnesium alloys Part 15: Lead in magnesium and magnesium alloys (atomic absorption method) |
|
BSI BS 3907-2 |
Methods for The determination of iron in magnesium and magnesium alloys (photometric 1 : 10-phenanthroline method) |
|
BSI BS 3907-9 |
Methods for The determination of zinc in magnesium alloys (Ion-exchange Volumetric EDTA method) Methods for the analysis of magnesium and magnesium alloys |
|
BSI BS 3908 PART 2 |
Methods for the Sampling and Analysis of Lead and Lead Alloys Part 2: Arsenic in Lead and Lead Alloys (Photometric Method)-Confirmed on 01 December 2002; |
|
BSI BS 3908-13 |
Method for The determination of antimony in lead and lead alloys (low contents) (photometric method) |
|
BSI BS 4432-1 |
Methods for Determining optical properties of pulp, paper and board Part 1: Measurement of diffuse reflectance factor of paper, board and pulps-AMD 10262: January 1999; ISO 2469: 1994; |
|
BSI BS 4443-4 |
Methods of test for Flexible cellular materials - Part 4: Method 10. Determination of solvent swelling-AMD 10310: November 2000; |
|
BSI BS 4638 |
Carbon Steel Wire for Zigzag and Square-Form Springs (AMD 7610) June 15, 1993 (V)-Amd 2; |
|
BSI BS 5047 |
Method for Evaluation of Solution-Polymerized Types of Butadiene Rubber (BR)-(V); ISO 2476: 1996 |
|
BSI BS 5946 |
Determination of the Punking Behaviour of Phenolformaldehyde Foam |
|
BSI BS 6388 PART 2 |
Accelerated Ageing of Paper and Board Part 2: Method for Dry Heat Treatment at 120 Degrees C or 150 Degrees C |
|
BSI BS 6449 PART 2 |
Rubber Compounding Ingredients: Precipitated, Hydrated Silica Part 2: Method for Determination of Physical Properties in Rubber (Including Test Recipe) |
|
BSI BS 7200 |
Specification for Synthetic-fibre needlefelts |
|
BSI BS 7442 PART 2 |
Rubber or Plastics Covered Rollers Part 2: Recommendations for Technical Information to Be Provided by the Purchaser (V) (ISO/TR 7621: 1982) |
|
BSI BS 7442 SEC 3.2 |
Rubber or Plastics Covered Rollers Part 3: Methods of Test Section 3.2: Determination of Shore Hardness (ISO 7267-2: 1986) (V) |
|
BSI BS 7442 SEC 3.3 |
Rubber or Plastics Covered Rollers Part 3: Methods of Test Section 3.3: Determination of Apparent Hardness by the Pusey and Jones Method (ISO 7267-3: 1988) (V) |
|
BSI BS 7737 PART 1 |
Recommended Methods for the Determination of the Dielectric Properties of Insulating Materials at Frequencies Above 300 MHz Part 1: General (IEC 377-1: 1973) (V) |
|
BSI BS 903 PART A51 |
Methods of Testing Vulcanized Rubber Part A51: Determination of Resistance to Tension Fatigue |
|
BSI BS 903 PART A59.1 |
Physical Testing of Rubber Part A59: Methods Using Plastimeters Section 59.1 Determination of the Rapid Plasticity Number-ISO 2007: 1991; Supersedes BS 903 PART A59:1990 |
|
BSI BS 903 PART A62 |
Physical Testing of Rubber Part A62: Method for Determination of Green Strength of Raw Rubber of Unvulcanized Compounds (ISO 9026: 1991) (V) |
|
BSI BS 903 SEC 60.2 |
Physical Testing of Rubber Part A60: Curemetering Section 60.2: Method for the Determination of Vulcanization Characteristics Using an Oscillating Disc Curemeter (ISO 3417: 1991) (V) |
|
BSI BS EN 10071 |
Chemical Analysis of Ferrous Materials Determination of Manganese in Steels and Irons Electrometric Titration Method |
|
BSI BS EN 10212 |
Chemical Analysis of Ferrous Materials - Determination of Arsenic in Steel and Iron - Spectrophotometric Method (V) |
|
BSI BS EN 10252 |
Magnetic Materials - Methods of Measurement of Magnetic Properties of Magnetic Steel Sheet and Strip at Medium Frequencies-Supersedes BS 6404: Part 10: 1989; |
|
BSI BS EN 10276-2 |
Chemical analysis of ferrous materials Determination of oxygen content in steel and iron Part 2: Infrared method after fusion under inert gas |
|
BSI BS EN 10336 |
Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming  Technical delivery conditions |
|
BSI BS EN 1094-3 |
Insulating refractory products Part 3: Classification of insulating products made from ceramic fibres-Supersedes DD ENV 1094-3: 1998; |
|
BSI BS EN 12012-1 |
Plastics and rubber machines  Size reduction machines  Part 1: Safety requirements for blade granulators |
|
BSI BS EN 12248 |
Sawn Timber Used in Industrial Packaging - Permitted Deviations and Preferential Sizes |
|
BSI BS EN 12249 |
Sawn Timber Used in Pallets - Permitted Deviations and Guidelines for Dimensions |
|
BSI BS EN 1227 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Long-Term Ultimate Relative Ring Deflection under Wet Conditions-Also Numbered as BS 2782-12: Method 1214F: 1998; |
|
BSI BS EN 13017-2 |
Solid Wood Panels - Classification by Surface Appearance - Part 2: Hardwood |
|
BSI BS EN 13183-1 |
Moisture content of a piece of sawn timber Part 1: Determination by oven dry method-CORR 14847: December 18, 2003; |
|
BSI BS EN 13348 |
Copper and Copper Alloys - Seamless, Round Copper Tubes for Medical Gases or Vacuum-AMD 15967: July 31, 2006 |
|
BSI BS EN 13446 |
Wood-based panels Determination of withdrawal capacity of fasteners |
|
BSI BS EN 13677-1 |
Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1: Designation |
|
BSI BS EN 13677-2 |
Reinforced thermoplastic moulding compounds Specification for GMT Part 2: Methods of test and general requirements |
|
BSI BS EN 13677-3 |
Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements |
|
BSI BS EN 13958 |
Aluminium and aluminium alloys Cold drawn, round coiled tube for general applications Specification |
|
BSI BS EN 1402-2 |
Unshaped refractory products Part 2: Sampling for testing-Supersedes DD ENV 1402-2:1997; |
|
BSI BS EN 14279 |
Laminated Veneer Lumber (LVL) Definitions, classification and specifications |
|
BSI BS EN 14436 |
Copper and copper alloys Electrolytically tinned strip |
|
BSI BS EN 15205 |
Determination of hexavalent chromium in corrosion protection layers Qualitative analysis |
|
BSI BS EN 1592-2 |
Aluminium and Aluminium Alloys - HF Seam Welded Tubes Part 2: Mechanical Properties-Together with BS EN 1592-1: 1998, BS EN 1592-3: 1998 and BS EN 1592-4: 1998 Supersedes BS 4300-1: 1967; |
|
BSI BS EN 1592-4 |
Aluminium and Aluminium Alloys - HF Seam Welded Tubes Part 4: Tolerances on Dimensions and Form for Square, Rectangular and Shaped Tubes-Together with BS EN 1592-1: 1998,BS EN 1592-2: 1998 and BS EN 1592-3: 1998 it Supersedes BS 4300-1: 1967; |
|
BSI BS EN 1655 |
Copper and Copper Alloys - Declarations of Conformity |
|
BSI BS EN 1780-2 |
Aluminium and aluminium alloys Designation of alloyed aluminium ingots for remelting, master alloys and castings Part 2: Chemical symbol based designation system |
|
BSI BS EN 23878 |
Hardmetals - Vickers Hardness Test (ISO 3878: 1983) (V) |
|
BSI BS EN 2428 |
Ethylene-Propylene Rubber (EPM/EPDM) Hardness 50 IRHD (V) |
|
BSI BS EN 478 |
Unplasticized Polyvinylchloride (PVC-U) Profiles for the Fabrication of Windows and Doors - Appearance After Exposure at 150 Degrees Celsius - Test Method |
|
BSI BS EN 60404-14 |
Magnetic materials Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method |
|
BSI BS EN 623-2 |
Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties Part 2: Determination of Density and Porosity (V) |
|
BSI BS EN 634-1 |
Cement-Bonded Particle Boards - Specification Part 1: General Requirements (V) |
|
BSI BS EN 658-4 |
Advanced technical ceramics Mechanical properties of ceramic composites at room temperature Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens-Supersedes DD ENV 658-4:1993; |
|
BSI BS EN 843-1 |
Advanced technical ceramics  Mechanical properties of monolithic ceramics at room temperature  Part 1: Determination of flexural strength |
|
BSI BS EN 917 |
Plastics Piping Systems - Thermoplastics Valves - Test Methods for Resistance to Internal Pressure and Leaktightness-Also Numbered as BS 2782: Part 11: Methods 1134A and B: 1997; |
|
BSI BS EN ISO 10714 |
Steel and iron Determination of phosphorus content Phosphovanadomolybdate spectrophotometric method |
|
BSI BS EN ISO 11248 |
Plastics - Thermosetting Moulding Materials - Evaluation of Short-Term Performance at Elevated Temperatures-AMD 10687: February 2000; Renumbers BS 2782-1 Method 136: 1994 |
|
BSI BS EN ISO 1158 |
Plastics - Vinyl Chloride Homopolymers and Copolymers - Determination of Chlorine Content |
|
BSI BS EN ISO 1172 |
Textile-Glass-Reinforced Plastics - Prepregs, Moulding Compounds and Laminates - Determination of the Textile-Glass and Mineral-Filler Content - Calcination Methods-AMD 10350: 4/1999; Also Known as BS ISO 1172: 1996 |
|
BSI BS EN ISO 14526-2 |
Plastics - Phenolic Powder Moulding Compounds (PF-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties |
|
BSI BS EN ISO 14526-3 |
Plastics - Phenolic Powder Moulding Compounds (PF-PMCs) - Part 3: Requirements for Selected Moulding Compounds |
|
BSI BS EN ISO 15874-3 |
Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 3: Fittings |
|
BSI BS EN ISO 1598 |
Plastics - Cellulose Acetate - Determination of Insoluble Particles-AMD 10721: 2/2000; Renumbers BS 2782-4: Method 480A: 1991 |
|
BSI BS EN ISO 17556 |
Plastics Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved-AMD 15560: April 25, 2005; Renumbers BS ISO 17556:2003 |
|
BSI BS EN ISO 22088-2 |
Plastics Determination of resistance to environmental stress cracking (ESC) Part 2: Constant tensile load method-:1998 |
|
BSI BS EN ISO 22088-3 |
Plastics Determination of resistance to environmental stress cracking (ESC) Part 3: Bent strip method-:1997 |
|
BSI BS EN ISO 2626 |
Copper - Hydrogen Embrittlement Test (V) |
|
BSI BS EN ISO 3785 |
Metallic materials Designation of test specimen axes in relation to product texture |
|
BSI BS EN ISO 3915 |
Plastics - Measurement of Resistivity of Conductive Plastics |
|
BSI BS EN ISO 4545-3 |
Metallic Materials - Knoop Hardness Test - Part 3: Calibration of Reference Blocks |
|
BSI BS EN ISO 483 |
Plastics - Small Enclosures for Conditioning and Testing Using Aqueous Solutions to Maintain the Humidity at a Constant Value |
|
BSI BS EN ISO 61 |
Plastics - Determination of Apparent Density of Moulding Material That Cannot Be Poured from a Specified Funnel-AMD 10686: 2/2000; Renumbers BS 2782-6: Method 621B: 1978 |
|
BSI BS ISO 10275 |
Metallic materials  Sheet and strip  Determination of tensile strain hardening exponent |
|
BSI BS ISO 11359-1 |
Plastics - Thermomechanical Analysis (TMA) - Part 1: General Principles |
|
BSI BS ISO 123 |
Rubber latex - Sampling-Supersedes BS 6057-2: 1987; |
|
BSI BS ISO 12775 |
Guidelines on Types of Glass of Normal Bulk-Production Composition and Their Test Methods |
|
BSI BS ISO 13003 |
Fibre-reinforced plastics Determination of fatigue properties under cyclic loading conditions |
|
BSI BS ISO 14851 |
Determination of the Ultimate Aerobic Biodegradability of Plastic Materials in an Aqueous Medium - Method by Measuring the Oxygen Demand in a Closed Respirometer-Renumbered as BS EN ISO 14851:2004 |
|
BSI BS ISO 14898 |
Plastics - Polyurethane Raw Materials - Aromatic Isocyanates - Determination of Acidity |
|
BSI BS ISO 16152 |
Plastics Determination of xylene-soluble matter in polypropylene |
|
BSI BS ISO 16160 |
Continuously hot-rolled steel sheet products Dimensional and shape tolerances |
|
BSI BS ISO 17422 |
Plastics Environmental aspects General guidelines for their inclusion in standards |
|
BSI BS ISO 289-4 |
Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 4: Determination of the Mooney stress-relaxation rate |
|
BSI BS ISO 3160-1 |
Watch-Cases and Accessories - Gold Alloy Coverings - Part 1: General Requirements-AMD 11094: February 2001; |
|
BSI BS ISO 4999 |
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities |
|
BSI BS ISO 7800 |
Metallic materials Wire Simple torsion test |
|
BSI DD CEN/TS 13354 |
Solid wood panels Bonding quality Test method |
|
BSI DD CEN/TS 13810-2 |
Wood-based panels - Floating floors - Part 2: Test methods |
|
BSI DD ENV 10080 |
Steel for the Reinforcement of Concrete - Weldable Ribbed Reinforcing Steel B500 - Technical Delivery Conditions for Bars, Coils and Welded Fabric (V) |
|
BSI DD ENV 1071-6 |
Advanced technical ceramics Methods of test for ceramic coatings Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test |
|
BSI DD ENV 14272 |
Plywood - Calculation Method for Some Mechanical Properties |
|
BSI BS 1524 |
Cellulose Acetate Moulding Materials |
|
BSI BS 1728-10 |
Method for The determination of manganese in aluminium and aluminium alloys (Absorptiometric method) Methods for the analysis of aluminiumand aluminium alloys |
|
BSI BS 1728-18 |
Methods for the Analysis of Aluminium and Aluminium Alloys: Part 18: Determination of Zinc (Ion-Exchange-Volumetric EDTA or Polargraphic Method) |
|
BSI BS 1728-20 |
Methods for the Analysis of Aluminium and Aluminium Alloys: Part 20: Lead (Atomic Absorption Method) |
|
BSI BS 2782PT1: METH 153A |
Methods of Testing Plastics Part 1: Thermal Properties Method 153A: Determination of Stiffness in Torsion of Flexible Materials (General Method) (ISO 458-1: 1985) |
|
BSI BS 2782PT10: METH 1004 |
Methods of Testing Plastics Part 10: Glass Reinforced Plastics Method 1004: Standard Atmospheres for Conditioning and Testing |
|
BSI BS 2782PT4: METH 452C |
Methods of Testing Plastics Part 4: Chemical Properties Method 452C: Determination of Butyl Content of Low Density Polythene Compounds |
|
BSI BS 2782PT5: METH 540B |
Methods of Testing Plastics: Part 5: Optical and Colour Properties, Weathering: Method 540B: Methods of Exposure to Laboratory Light Sources, (Xenon Arc Lamp, Enclosed Carbon Arc Lamp, Open- Flame Carbon Arc Lamp, Fluorescent Tube Lamps)-Replaces Method 507B of BS 2782: 1970; Replaced by BS 2782: Part 5: Method 540D, E, F, G |
|
BSI BS 2782PT6: METH 630A |
Methods of Testing Plastics Part 6: Dimensional Properties Method 630A: Determination of Thickness by Mechanical Scanning of Flexible Sheet (ISO 4593: 1993) (V) |
|
BSI BS 2782PT8: METH 835B |
Methods of Testing Plastics Part 8: Other Properties Method 835B: Determination of Gelation Time of Polyester Resins (Manual Method) |
|
BSI BS 2782PT8: METH 835C |
Methods of Testing Plastics Part 8: Other Properties Method 835C: Determination of Gelation Time of Polyester and Epoxide Resins Using a Gel Timer |
|
BSI BS 2880 |
Methods of Testing Cellulose Acetate Flake |
|
BSI BS 3338-10 |
Method for The determination of iron in ingot tin, tin-lead solders and white metal bearing alloys (Photometric method) Methods for the sampling and analysis of tin and tin alloys |
|
BSI BS 3338-17 |
Method for The determination of cadmium in solders and white metal bearing alloys (Photometric method) Methods for the sampling and analysis of tin and tin alloys |
|
BSI BS 3338-18 |
Method for The determination of aluminium in solders and white metal bearing alloys (Photometric method) Methods for the sampling and analysis of tin and tin alloys |
|
BSI BS 3338-19 |
Method for The determination of zinc in solders and white metal bearing alloys (Photometric method) Methods for the sampling and analysis of tin and tin alloys |
|
BSI BS 3338-4 |
Method for The determination of copper in ingot tin and tin-lead solders (photometric method) Methods for the sampling and analysis of tin and tin alloys |
|
BSI BS 3338-5 |
Method for The determination of lead in ingot tin and tin-antimony solders (photometric method) |