|
BSI BS EN 13615 |
CORR 1 Methods for the Analysis of Ingot Tin - Determination of Impurity Element Contents in Tin Grades 99, 90% and 99, 85% by Atomic Spectrometry-CORR 13789: Octorber 24, 2003; |
|
BSI BS EN 13920-14 |
Aluminium and Aluminium Alloys - Scrap - Part 14: Scrap from Post-Consumer Aluminium Packagings |
|
BSI BS EN 13920-5 |
Aluminium and aluminium alloys Scrap Part 5: Scrap consisting of two or more wrought alloys of the same series |
|
BSI BS EN 1402-5 |
Unshaped refractory products  Part 5: Preparation and treatment of test pieces-CORR 17176: June 29, 2007 |
|
BSI BS EN 1448 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Components - Test Methods to Prove the Design of Rigid Locked Socket-and-Spigot Joints with Elastomeric Seals-Also Known as BS 2782: Part 12: Method 1224E: 1997; |
|
BSI BS EN 14935 |
Copper and copper alloys Determination of impurities in pure copper ET AAS method |
|
BSI BS EN 14937-1 |
Copper and copper alloys Determination of antimony content Part 1: Spectrophotometric method |
|
BSI BS EN 14940-2 |
Copper and copper alloys Determination of chromium content Part 2: FAAS method |
|
BSI BS EN 14941 |
Copper and copper alloys Determination of cobalt content FAAS method |
|
BSI BS EN 15063-2 |
Copper and copper alloys Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) Part 2: Routine method |
|
BSI BS EN 1611-1 |
Sawn Timber - Appearance Grading of Softwoods - Part 1: European Spruces, Firs, Pines and Douglas Fir-AMD 13926: January 17, 2003; |
|
BSI BS EN 1704 |
Plastics Piping Systems - Thermoplastics Valves - Test Method for the Integrity of a Valve After Temperature Cycling under Bending-Also Numbered as BS 2782: Part 11: Method 1133B: 1997; |
|
BSI BS EN 1734 |
Rubber- or Plastics- Coated Fabrics - Determination of Resistance to Water Penetration - Low-Pressure Method |
|
BSI BS EN 1842 |
Plastics - Thermoset Moulding Compounds (SMC - BMC) - Determination of Compression Moulding Shrinkage |
|
BSI BS EN 1942 |
Self Adhesive Tapes - Measurement of Thickness |
|
BSI BS EN 2157-3 |
Steel Forging Stock and Forgings Technical Specifications Part 3: Pre-Production and Production Forgings (V) |
|
BSI BS EN 2261 |
Silicone Rubber (VMQ) Hardness 70 IRHD (V) |
|
BSI BS EN 2262 |
Silicone Rubber (VMQ/PVMQ) with High Tear Strength Hardness 50 IRHD (V) |
|
BSI BS EN 23327 |
Hardmetals - Determination of Transverse Rupture Strength (ISO 3327: 1982) (V) |
|
BSI BS EN 23907 |
Hardmetals - Determination of Total Carbon Content - Gravimetric Method (ISO 3907: 1985) (V) |
|
BSI BS EN 23995 |
Metallic Powders - Determination of Green Strength by Transverse Rupture of Rectangular Compacts (ISO 3995: 1985) (V) |
|
BSI BS EN 24003 |
Permeable Sintered Metal Materials - Determination of Bubble Test Pore Size-ISO 4003: 1977; Replaces BS 5600: Part 3: Section 3.5: 1979 |
|
BSI BS EN 2432 |
Ethylene-Propylene Rubber (EPM/EPDM) Hardness 90 IRHD (V) |
|
BSI BS EN 2489 |
Fibre Reinforced Plastics - Determination of the Action of Test Fluids (V) |
|
BSI BS EN 275 |
Wood Preservatives - Determination of the Protective Effectiveness Against Marine Borers |
|
BSI BS EN 350-2 |
Durability of Wood and Wood-Based Products - Natural Durability of Solid Wood Part 2: Guide to Natural Durability and Treatability of Selected Wood Species of Importance in Europe (V) |
|
BSI BS EN 386 |
Glued Laminated Timber - Performance Requirements and Minimum Production Requirements |
|
BSI BS EN 391 |
Glued Laminated Timber - Delamination Test of Glue Lines |
|
BSI BS EN 392 |
Glued Laminated Timber - Shear Test of Glue Lines (V) |
|
BSI BS EN 46-2 |
Wood preservatives Determination of the preventive action against Hylotrupes bajulus (Linnaeus) Part 2: Ovicidal effect (laboratory method) |
|
BSI BS EN 477 |
Unplasticized Polyvinylchloride (PVC-U) Profiles for the Fabrication of Windows and Doors - Determination of the Resistance to Impact of Main Profiles by Falling Mass |
|
BSI BS EN 487 |
Aluminium and Aluminium Alloys - Rolling Ingots - Specifications (V) |
|
BSI BS EN 61068-3-1 |
Polyester Fibre Woven Tapes - Part 3: Specifications for Individual Materials - Sheet 1: Tapes Woven on Conventional or Shuttleless Looms-CORR 10781; June 2000; IEC 1068-3-1: 1995; |
|
BSI BS EN 656 |
Gas-fired central heating boilers Type B boilers of nominal heat input exceeding 70 kW but not exceeding 300 kW-AMD 16533: September 29, 2006; Partially Supersedes BS 5978-1, BS 5978-2, and BS 5978-3: 1989 |
|
BSI BS EN 714 |
Thermoplastics Piping Systems - Non-End- Load-Bearing Elastomeric Sealing Ring Type Joints Between Pressure Pipes and Moulded Fittings - Test Method for Leaktightness Under Internal Hydrostatic Pressure Without End Thrust (V) |
|
BSI BS EN 725-11 |
Advanced technical ceramics Methods of test for ceramic powders Part 11: Determination of densification on natural sintering-:1994 |
|
BSI BS EN 725-3 |
Advanced Technical Ceramics - Methods of Test for Ceramic Powders Part 3: Determination of the Oxygen Content of Non-Oxides by Thermal Extraction with a Carrier Gas (V) |
|
BSI BS EN 911 |
Plastics Piping Systems - Elastomeric Sealing Ring Type Joints and Mechanical Joints for Thermoplastics Pressure Piping - Test Method for Leaktightness Under External Hydrostatic Pressure (V) |
|
BSI BS EN 927-3 |
Paints and varnishes Coating materials and coating systems for exterior wood Part 3: Natural weathering test-CORR 15523:February 25, 2005 |
|
BSI BS EN 993-18 |
Methods of test for dense shaped refractory products Part 18: Determination of bulk density of granular materials by the water method with vacuum |
|
BSI BS EN ISO 10066 |
Flexible Cellular Polymeric Materials - Determination of Creep in Compression |
|
BSI BS EN ISO 10280 |
Steel and Iron - Determination of Titanium Content - Diantipyrylmethane Spectrophotometric Method (AMD 8697) December 15, 1995 (Formerly BS 6200: Part 3: Sec 3.32: Subsec 3.32.1: 1991 Replaces BS 6200: Part 3: Sect 3.32 :Subsec 3.32.1: 1986) (V)-Amd 1; |
|
BSI BS EN ISO 10366-2 |
Plastics Methyl methacrylate - acrylonitrile - butadiene - styrene (MABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties-CORR 15077: April 7, 2004 |
|
BSI BS EN ISO 10700 |
Steel and Iron - Determination of Manganese Content - Flame Atomic Absorption Spectrometric Method (V) |
|
BSI BS EN ISO 11337 |
Plastics Polyamides Determination of e-caprolactam and w-laurolactam by gas chromatography |
|
BSI BS EN ISO 11401 |
Plastics - Phenolic Resins - Separation by Liquid Chromatography |
|
BSI BS EN ISO 11403-3 |
Plastics - Acquisition and Presentation of Comparable Multipoint Data - Part 3: Environmental Influences on Properties-CORR 13645:January 18,2002; |
|
BSI BS EN ISO 11409 |
Plastics - Phenolic Resins - Determination of Heats and Temperatures of Reaction by Differential Scanning Calorimetry |
|
BSI BS EN ISO 11490 |
Determination of Palladium in Palladium Jewellery Alloys - Gravimetric Method with Dimethyl Glyoxime (V) |
|
BSI BS EN ISO 12058-1 |
Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method-AMD 14166: February 12, 2003; Supersedes BS EN ISO 9371:1995; Renumbers BS ISO 12058-1:1997; |
|
BSI BS EN ISO 1264 |
Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride - Determination of pH of Aqueous Extract-Also Known as BS 2782: PT 4: Meth 454C: 1997; Supersedes BS 2782-4:METHOD 454C:1978 |
|
BSI BS EN ISO 1269 |
Plastics Homopolymer and copolymer resins of vinyl chloride Determination of volatile matter (including water)-EN ISO 1269:2006; Supersedes BS 2782-4:Method 454D:1978 |
|
BSI BS EN ISO 13002 |
Carbon Fibre - Designation System for Filament Yarns |
|
BSI BS EN ISO 13479 |
Polyolefin Pipes for the Conveyance of Fluids - Determination of Resistance to Crack Propagation - Test Method for Slow Crack Growth on Notched Pipes (Notch Test) |
|
BSI BS EN ISO 13802 |
Plastics Verification of pendulum impact-testing machines Charpy, Izod and tensile impact-testing-AMD 16022: September 2006; Renumbers BS ISO 13802:1999 |
|
BSI BS EN ISO 13900 |
Steel Determination of Boron Content Curcumin Spectrophotometric Method After Distillation-Supersedes BS 6200.3.5.3: 1998; |
|
BSI BS EN ISO 14527-3 |
Plastics - Urea-Formaldehyde and Urea/Melamine-Formaldehyde Powder Moulding Compounds (UF- and UF/MF-PMCs) - Part 3: Requirements for Selected Moulding Compounds |
|
BSI BS EN ISO 14528-3 |
Plastics - Melamine-Formaldehyde Powder Moulding Compounds (MF-PMCs) - Part 3: Requirements for Selected Moulding Compounds |
|
BSI BS EN ISO 14530-3 |
Plastics - Unsaturated-Polyester Powder Moulding Compounds (Up-PMCs) - Part 3: Requirements for Selected Moulding Compounds |
|
BSI BS EN ISO 14896 |
Plastics - Polyurethane raw materials - Determination of isocyanate content-CORR 13760: March 13, 2002; Supersedes BS EN ISO 9369: 1997; |
|
BSI BS EN ISO 15013 |
Extruded Sheets of Polypropylene (PP) - Requirements and Test Methods |
|
BSI BS EN ISO 15023-2 |
Plastics Poly(vinyl alcohol) (PVAL) materials - Part 2: Determination of properties-AMD 16031: June 2006; Renumbers BS ISO 15023-2:2003 |
|
BSI BS EN ISO 15310 |
Reinforced plastics Determination of the in-plane shear modulus by the plate twist method-AMD 15944: March 2006; Renumbers BS ISO 15310: 2000 |
|
BSI BS EN ISO 182-3 |
Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 3: Conductometric Method |
|
BSI BS EN ISO 1889 |
Reinforcement Yarns - Determination of Linear Density |
|
BSI BS EN ISO 21627-2 |
Plastics Epoxy resins Determination of chlorine content Part 2: Easily saponifiable chlorine-Supersedes BS EN ISO 4583:1998; |
|
BSI BS EN ISO 21627-3 |
Plastics Epoxy resins Determination of chlorine content Part 3: Total chlorine-Supersedes BS ISO 13651:1996; |
|
BSI BS EN ISO 2556 |
Plastics - Determination of the Gas Transmission Rate of Films and Thin Sheets under Atmospheric Pressure - Manometric Method-AMD 13432: 10/31/2001; Renumbers BS 2782-8: Method 821A:1979 |
|
BSI BS EN ISO 2578 |
Plastics - Determination of Time-Temperature Limits After Prolonged Exposure to Heat-AMD 10349: May 1999; Renumbers BS 2782: Part 1: Method 135: 1993 |
|
BSI BS EN ISO 305 |
Plastics - Determination of Thermal Stability of Poly (Vinyl Chloride) Related Chlorine-Containing Homopolymers and Copolymers and Their Compounds - Discoloration Method |
|
BSI BS EN ISO 3451-4 |
Plastics - Determination of Ash - Part 4: Polyamides-Supersedes BS EN ISO 3451-4: 1996, Which is Withdrawn; |
|
BSI BS EN ISO 3451-5 |
Plastics - Determination of Ash - Part 5: Poly(Vinyl Chloride) |
|
BSI BS EN ISO 3521 |
Plastics - Unsaturated Polyester and Epoxy Resins - Determination of Overall Volume Shrinkage-AMD 10689: April 2000; CORR 15092: April 30, 2004; Renumbers BS 2782-6: Method 644A: 1997; Supersedes BS 2782-6: Method 644A: 1979 |
|
BSI BS EN ISO 3671 |
Plastics - Aminoplastic Moulding Materials - Determination of Volatile Matter-AMD 10345: April 1999; Renumbers BS 2782: Part 4: Method 461A: 1978 |
|
BSI BS EN ISO 3672-1 |
Plastics - Unsaturated-Polyester Resins (UP-R) - Part 1: Designation System-CORR 13915; May 14, 2002: Renumbers BS ISO 3672-1:2000; |
|
BSI BS EN ISO 3815-2 |
Zinc and zinc alloys Part 2: Analysis by inductively coupled plasma optical emission spectrometry-Together with BS EN ISO 3815-1:2005 supersedes BS EN 12019:1998 |
|
BSI BS EN ISO 4491-2 |
Metallic Powders - Determination of Oxygen Content by Reduction Methods - Part 2: Loss of Mass on Hydrogen Reduction (Hydrogen Loss)-Supersedes BS EN 24491-2: 1993; |
|
BSI BS EN ISO 4507 |
Sintered ferrous materials, carburized or carbonitrided  Determination and verification of case-hardening depth by a micro-hardness test-AMD 17025: March 30, 2007 |
|
BSI BS EN ISO 4613-2 |
Plastics - Ethylene/Vinyl Acetate (E/VAC) Moulding and Extrusion Materials Part 2: Preparation of Test Specimens and Determination of Properties (V)-AMD 15371:October 11, 2004 |
|
BSI BS EN ISO 584 |
Plastics - Unsaturated Polyester Resins - Determination of Reactivity at 80 Degrees C (Conventional Method) |
|
BSI BS EN ISO 6402-1 |
Plastics Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)- styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials-CORR 14276: December 20, 2002; |
|
BSI BS EN ISO 7327 |
Plastics - Hardeners and Accelerators for Epoxide Resins - Determination of Free Acid in Acid Anhydride-AMD 9699: November 1997; Renumbers BS 2782: Part 4: Method 433E: 1996 |
|
BSI BS EN ISO 7792-2 |
Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties-AMD 15252:August 27, 2004; Renumbers as BS ISO 7792-2:1997 |
|
BSI BS EN ISO 8257-2 |
Plastics Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties-AMD 16026: August 2006; Renumbers BS ISO 8257-2:2001 |
|
BSI BS EN ISO 8435 |
Metallic materials Tube Ring-expanding test-Supersedes BS EN 10236:1994 |
|
BSI BS EN ISO 846 |
Plastics - Evaluation of the Action of Microorganisms |
|
BSI BS EN ISO 8974 |
Plastics - Phenolic Resins - Determination of Residual Phenol Content by Gas Chromatography |
|
BSI BS ISO 10081-1 |
Classification of dense shaped refractory products Part 1: Alumina-silica |
|
BSI BS ISO 11323 |
Iron Ores and Direct Reduced Iron - Vocabulary |
|
BSI BS ISO 11438-5 |
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method Part 5: Determination of Tellurium Content (V) |
|
BSI BS ISO 11455 |
Raw Optical Glass - Determination of Birefringence (V) |
|
BSI BS ISO 11556 |
Paper and board Determination of curl using a single vertically suspended test piece-CORR 14653: September 19, 2003; |
|
BSI BS ISO 11566 |
Carbon Fibre - Determination of the Tensile Properties of Single-Filament Specimens |
|
BSI BS ISO 11873 |
Hardmetals Determination of sulfur and carbon contents in cobalt metal powders Infrared detection method |
|
BSI BS ISO 11907-4 |
Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 4: Dynamic Decomposition Method Using a Conical Radiant Heater |
|
BSI BS ISO 125 |
Natural rubber latex concentrate Determination of alkalinity-Supersedes 6057-3-3: 1990; |
|
BSI BS ISO 1268-11 |
Fibre-reinforced plastics Methods of producing test plates Part 11: Injection moulding of BMC and other long-fibre moulding compounds Small plates |
|
BSI BS ISO 1268-7 |
Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 7: Resin Transfer Moulding |
|
BSI BS ISO 12744 |
Copper, lead, zinc and nickel concentrates  Experimental methods for checking the precision of sampling |
|
BSI BS ISO 13310 |
Iron Ores - Determination of Zinc Content - Flame Atomic Absorption Spectrometric Method |
|
BSI BS ISO 13362 |
Flexible Cellular Polymeric Materials - Determination of Compression Set Under Humid Conditions-CORR 16136: July 2006 |
|
BSI BS ISO 13894-1 |
High-Pressure Decorative Laminates - Composite Elements - Part 1: Test Methods |
|
BSI BS ISO 13976 |
Hot-rolled steel sheet in coils of structural quality and heavy thickness |
|
BSI BS ISO 14168 |
Metallic powders, excluding hardmetals Method for testing copper-base infiltrating powders |
|
BSI BS ISO 1434 |
Natural Rubber in Bales - Amount of Bale Coating - Determination |
|
BSI BS ISO 14848 |
Plastics - Unsaturated-Polyester Resins - Determination of Reactivity at 130 Degrees C |
|
BSI BS ISO 14899 |
Plastics - Polyols for Use in the Production of Polyurethane - Determination of Basicity |
|
BSI BS ISO 14900 |
Plastics - Polyols for Use in the Production of Polyurethane - Determination of Hodroxyl Number |
|
BSI BS ISO 15490 |
Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Test Method for Tensile Strength of Monolithic Ceramics at Room Temperature |
|
BSI BS ISO 15671 |
Rubber and Rubber Additives - Determination of Total Sulfur Content Using an Automatic Analyser |
|
BSI BS ISO 15988 |
Plastics - Film and Sheeting - Biaxially Oriented Poly(Ethylene Terephthalate) (PET) Films |
|
BSI BS ISO 16014-2 |
Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 2: Universal calibration method |
|
BSI BS ISO 16162 |
Continuously cold-rolled steel sheet products Dimensional and shape tolerances |
|
BSI BS ISO 16163 |
Continuously hot-dipped coated steel sheet products Dimensional and shape tolerances |
|
BSI BS ISO 1628-5 |
Plastics - Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 5: Thermoplastic Polyester (TP) Homopolymers and Copolymers-Supersedes BS 2782-7: METH 732E:1991; Also Known as BS 2782-7: METH 732E:1998 |
|
BSI BS ISO 16564 |
Rubber, raw natural Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)-AMD 16463: June 30, 2006 |
|
BSI BS ISO 16565 |
Rubber - Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers |
|
BSI BS ISO 16869 |
Plastics - Assessment of the Effectiveness of Fungistatic Compounds in Plastics Formulations |
|
BSI BS ISO 17053 |
Steel and iron Determination of oxygen Infrared method after fusion under inert gas |
|
BSI BS ISO 17544 |
Carbonaceous materials used in the production of aluminium Cold and tepid ramming pastes Determination of rammability of unbaked pastes |
|
BSI BS ISO 17710 |
Plastics Polyols for Use in the Production of Polyurethane Determination of Degree of Unsaturation by Microtitration |
|
BSI BS ISO 18899 |
Rubber Guide to the calibration of test equipment |
|
BSI BS ISO 19212 |
Adhesives Determination of temperature dependence of shear strength |
|
BSI BS ISO 19959 |
Visual examination of the surface condition of investment castings Steel, nickel alloys and cobalt alloys |
|
BSI BS ISO 20299-1 |
Film for wrapping rubber bales Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR) |
|
BSI BS ISO 21509 |
Plastics and ebonite Verification of Shore durometers |
|
BSI BS ISO 21669 |
Steel wire ropes Determination of rotational properties |
|
BSI BS ISO 2302 |
Isobutene-isoprene rubber (IIR) Evaluation procedures-Supersedes BS 4470:1996 |
|
BSI BS ISO 2303 |
Isoprene rubber (IR) Non-oil-extended, solution-polymerized types Evaluation procedure-Supersedes BS 5474: 1991; |
|
BSI BS ISO 23794 |
Rubber, vulcanized or thermoplastic Abrasion testing Guidance |
|
BSI BS ISO 2599 |
Iron ores Determination of phosphorus content Titrimetric method-Supersedes BS 7020-6.1:1988; |
|
BSI BS ISO 3869 |
Composition Cork - Expansion Joint Fillers - Specifications, Packaging and Marking |
|
BSI BS ISO 4433-2 |
Thermoplastics Pipes - Resistance to Liquid Chemicals - Classification Part 2: Polyolefin Pipes-Also Numbered as BS 2782: Part 11: Method 1161B: 1998; |
|
BSI BS ISO 4708 |
Composition Cork - Gasket Material - Test Methods |
|
BSI BS ISO 4798 |
Laboratory Glassware Filter Funnels |
|
BSI BS ISO 5796 |
Rubber Compounding Ingredients - Natural Calcium Carbonate - Test Methods |
|
BSI BS ISO 5952 |
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance |
|
BSI BS ISO 7743 |
Rubber, vulcanized or thermoplastic Determination of compression stress-strain properties |
|
BSI BS ISO 7792-2 |
Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties-Renumbered as BS EN ISO 7792-2:2004 |
|
BSI BS ISO 8257-1 |
Plastics - Poly(Methyl Methacrylate) (PMMA) Moulding and Extrusion Materials Part 1: Designation (V) |
|
BSI BS ISO 8660 |
Plastics - Determination of Permanganate Absorption Number of Caprolactam - Spectrometric Method |
|
BSI BS ISO 9727-2 |
Cylindrical cork stoppers  Physical tests  Part 2: Determination of mass and apparent density for agglomerated cork stoppers |
|
BSI BS ISO 9727-6 |
Cylindrical cork stoppers  Physical tests  Part 6: Determination of liquid tightness |
|
BSI BS ISO/TR 5659-3 |
Plastics - Smoke Generation - Part 3: Determination of Optical Density by a Dynamic Flow Method |
|
BSI DD CEN/TR 13233 |
Advanced technical ceramics  Notations and symbols |
|
BSI DD CEN/TS 15083-2 |
Durability of wood and wood-based products Determination of the natural durability of solid wood against wood-destroying fungi, test methods Part 2: Soft rotting micro-fungi |
|
BSI DD ENV 1006 |
Advanced technical ceramics Monolithic ceramics Guidance on the selection of test pieces for the evaluation of properties |
|
BSI DD ENV 12212 |
Advanced Technical Ceramics - Unified Method for Classification (V) |
|
BSI DD ENV 12923-2 |
Advanced Technical Ceramics - Monolithic Ceramics - Part 2: Oxidation Test |
|
BSI DD ENV 14029 |
Lead and Lead Alloys - Analysis by Flame Atomic Absorption Spectrometry (FAAS) or Inductively Coupled Plasma Emission Spectrometry (ICP-ES), After Separation of the Lead Matrix |
|
BSI DD ENV 658-6 |
Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at Room Temperature Part 6: Determination of Shear Strength by Double-Punch Shearing |
|
BSI DD ENV 725- 2 |
Advanced Technical Ceramics - Methods of Test for Ceramic Powders Part 2: Determination of Impurities in Barium Titanate (V) |
|
BSI DD ENV 955-4 |
Chemical Analysis of Refractory Products Part 4: Products Containing Silica and/or Alumina (Analysis by Flame Atomic Absorption Spectrometry (FAAS) and Inductively Coupled Plasma Atomic Emission Spectrography (ICP)) |
|
BSI BS 5293 PART 1 |
Sampling and Testing Carbon Black for Use in the Rubber Industry Part 1: Methods of Sampling (ISO 1124: 1988) |
|
BSI BS 5293 PART 11 |
Sampling and Testing Carbon Black for Use in the Rubber Industry Part 11: Method for Determination of Specific Surface Area by Nitrogen Adsorption Using Single-Point Procedures (ISO 4652-1: 1994) (V) |
|
BSI BS 5293-8 |
Sampling and Testing Carbon Black for Use in the Rubber Industry - Part 8: Method for Determination of Dust Content-ISO 11234:1995 |
|
BSI BS 6043 SEC 2.11 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 2: Electrode Coke Section 2.11: Determination of Volatile Matter Content (ISO 9406: 1995) (V) |
|
BSI BS 6043 SEC 2.15 |
Methods of Sampling and Test for Carbonaceous Materials for Use in Aluminium Manufacture; Part 2: Electrode Coke; Section 2.15: Determination of Grain Stability of Calcined Coke Using a Laboratory Vibration Mill-ISO 10142: 1996; |
|
BSI BS 6043 SEC 4.0 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 4: Cold Ramming Pastes Section 4.0: General Introduction |
|
BSI BS 6043 SEC 4.10 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 4: Cold Ramming Pastes Section 4.10: Determination of the Apparent Porosity of Baked Rammed Paste |
|
BSI BS 6043 SEC 4.7 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 4: Cold Ramming Pastes Section 4.7: Preparation of Baked Rammed Test Pieces and Determination of Baked Apparent Density, Change in Volume and Loss in Mass |
|
BSI BS 6043 SEC 4.9 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 4: Cold Ramming Pastes Section 4.9: Determination of the Cold Crushing Strength of Baked Rammed Paste |
|
BSI BS 6043-2.9 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 2.9: Electrode coke - Determination of particle size distribution-ISO 12984: 2000 |
|
BSI BS 6043-3.1.2 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 3: Electrodes - Section 3.1: Sampling - Subsection 3.1.2: Sampling of anodes-ISO 8007-2: 1999 |
|
BSI BS 6043-3.8.1 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 3: Electrodes - Section 3.8: Carboxy reactivity of prebaked anodes- Subsection 3.8.1: Determination of the reactivity by a loss in mass method-ISO 12988-1: 2000 |
|
BSI BS 6043-3.9.1 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 3.9.1: Electrodes - Chemical reactivity to air of prebaked anodes - Determination of the reactivity by a loss in mass method-ISO 12989-1: 2000 |
|
BSI BS 6057 SEC 3.13 |
Rubber Latices Part 3: Methods of Test Section 3.13: Determination of Sludge Content (ISO 2005: 1992) |
|
BSI BS 6200 SUB SEC 3.10.5 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.10: Determination of Chromium Subsection 3.10.5: Ferrochromium: Volumetric Method |
|
BSI BS 6200 SUB SEC 3.11.2 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.11: Determination of Cobalt Subsec 3.11.2: Steel, Irons and Steelmaking Materials: Spectrophotometric Method for Trace Amounts-Replaces Method 2 for the Determination of Aluminium in Handbook 19: 1970 |
|
BSI BS 6200 SUB SEC 3.12.5 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.2: Determination of Copper Subsection 3.12.5: Permanent Magnet Alloys: Volumetric Method-Replaces Method 4 for the Determination of Copper in Handbook 19: 1970; |
|
BSI BS 6200 SUB SEC 3.17.1 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.17: Determination of Magnesium Subsection 3.17.1: Cast Iron: Volumetric Method (V) |
|
BSI BS 6200 SUB SEC 3.18.4 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.18: Determination of Manganese Subsection 3.18.4: Steel and Cast Iron: Volumetric Method |
|
BSI BS 6200 SUB SEC 3.20.3 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.20: Determination of Nickel Subsection 3.20.3: Steel and Cast Iron: Spectrophotometric Method-Replaces Method 3 for the Determination of Nickel in Handbook No. 19: 1970; |
|
BSI BS 6200 SUB SEC 3.22.3 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.22: Determination of Nitrogen Subsection 3.22.3: Steel: Spectrophotometric Method (for Trace Amounts)-AMD 7076; February 28, 1992; Replaces Method 2 for the Determination of Nitrogen in Handbook No. 19: 1970; |
|
BSI BS 6200 SUB SEC 3.31.2 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.31: Determination of Tin Subsection 3.31.2: Ferrotungsten and Tungsten Metal: Volumetric Method |
|
BSI BS 6200 SUBSEC 3.1.2 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.1: Determination of Aluminium Subsection 3.1.2: Steel and Cast Iron: Spectrophotometric Method |
|
BSI BS 6200 SUBSEC 3.1.5 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.1: Determination of Aluminium Subsection 3.1.5: Ferro-Silicon: Atomic Absorption Spectrometric Method |
|
BSI BS 6200 SUBSEC 3.40.3 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.40: Multi-Element Methods Subsection 3.40.3: Determination of Nickel, Copper and Cobalt Contents by Inductively Coupled Plasma Atomic Emission Spectrometric Method - Determination of Copper Content-ISO 13898-3: 1997; |
|
BSI BS 6200-3.31.3 |
Steel and iron - Determination of tin content - Flame atomic absorption spectrometric method (extraction as Sn-SCN)-ISO 15353 |
|
BSI BS 6200SUB SEC 3.8.2 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.8: Determination of Carbon Subsection 3.8.2: Steel and Cast Iron: Non-Aqueous Titrimetric Method After Combustion-Replaces BS Handbook 19 |
|
BSI BS 6582 |
Continuously Hot-Dip Lead Alloy (Terne) Coated Cold Reduced Carbon Steel Flat Rolled Products |
|
BSI BS 6721 PART 11 |
Sampling and Analysis of Copper and Copper Alloys Part 11: Method for Determination of Sulphur in Copper and Copper Alloys: Combustion Titrimetric Method (ISO 7266: 1984) (V) |
|
BSI BS 6721 PART 4 |
Sampling and Analysis of Copper and Copper Alloys Part 4: Method for Determination of Chromium in Copper and Copper Alloys by Flame Atomic Absorption Spectrophotometry |
|
BSI BS 6783 PART 7 |
Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 7: Method for Determination of Sulphur in Nickel, Ferronickel and Nickel Alloys by Infra-Red Absorption After Induction Furnace Combustion (ISO 7526: 1985) (AMD 6993) April 1, 1992 (V)-Amd 1; |
|
BSI BS 7030 |
Method for Determination of the Coefficient of Mean Linear Thermal Expansion of Glass |
|
BSI BS 7164 PART 13 |
Chemical Tests for Raw and Vulcanized Rubber Part 13: Method for Determination of Total Hydrocarbon Content (AMD 8596) May 15, 1995 (V)-Amd 1; |
|
BSI BS 7164 SEC 28.2 |
Chemical Tests for Raw and Vulcanized Rubber Part 28: Methods for Determination of Copper Content (V) Section 28.2: Photometric Method (ISO 8053: 1985) |
|
BSI BS 7164 SEC 7.1 |
Chemical Tests for Raw and Vulcanized Rubber Part 7: Methods for Determination of Polymer Content Section 7.1: Polyisoprene Content |
|
BSI BS 7164-3 |
Chemical tests for raw and vulcanized rubber  Part 3: Methods for determination of solvent extract-CORR 17007: May 31, 2007 |
|
BSI BS 7332 |
Decorative Continuous Laminates (DCL) Based on Thermosetting Resins |
|
BSI BS 7406 |
Methods for Determination of Water Vapour Transmission Rate of Sheet Materials (Paper and Board) by Dynamic Sweep and Static Gas Methods |
|
BSI BS 7544 |
Method for Graphical Presentation of the Complex Modulus of Damping Materials (ISO 10112: 1991) (V) |
|
BSI BS 7604 PART 1 |
Method for Determination of Stress-Optical Coefficient of Glass Part 1: Tensile Test (ISO 10345-1: 1992) |
|
BSI BS 7619 |
Extruded Cellular Unplasticized PVC (PVC-UE) Profiles |
|
BSI BS 7709 PART 6 |
Analysis of Extract Solutions of Glass Part 6: Method for Determination of Boron(III) Oxide by Molecular Absorption Spectrometry (ISO 10136-6: 1993) (V) |
|
BSI BS 7793 PART 2 |
Vitreous Enamel Coatings for Use on Bolted Steel Panels Part 2: Specification for Coatings on Bolted Steel Panels for Use in Industrial Liquid Storage Tanks (V) |
|
BSI BS 7825 PART 2 |
Calibration of Rubber and Plastics Test Equipment Part 2: Calibration Procedures (V) |
|
BSI BS EN 1071-1 |
Advanced technical ceramics Methods of test for ceramic coatings Part 1: Determination of coating thickness by contact probe filometer-Supersedes DD ENV 1071-1:1993; |
|
BSI BS EN 12060 |
Zinc and Zinc Alloys - Method of Sampling - Specifications-Supersedes BS 3630: Part 4: 1963; |
|
BSI BS EN 12099 |
Plastics Piping Systems - Polyethylene Piping Materials and Components - Determination of Volatile Content-Also Numbered as BS 2782: Part 11: Method 1103E: 1997; |
|
BSI BS EN 12384 |
Copper and Copper Alloys - Determination of Spring Bending Limit on Strip-CORR 10970; July 2000; |
|
BSI BS EN 12441-8 |
Zinc and zinc alloys Chemical analysis Part 8: Determination of tin in secondary zinc Flame atomic absorption spectrometric method |
|
BSI BS EN 12788 |
Advanced technical ceramics Mechanical properties of ceramic composites at high temperature under inert atmosphere Determination of flexural strength |
|
BSI BS EN 12877-1 |
Colouring Materials in Plastics - Determination of Colour Stability to Heat During Processing of Colouring Materials in Plastics - Part 1: General Introduction |
|
BSI BS EN 13086 |
Lead and Lead Alloys - Lead Oxides |
|
BSI BS EN 1309-1 |
Round and Sawn Timber - Method of Measurement of Dimensions Part 1: Sawn Timber |
|
BSI BS EN 13148 |
Copper and Copper Alloys - Hot-Dip Tinned Strip |
|
BSI BS EN 13183-2 |
Moisture content of a piece of sawn timber Part 2: Estimation by electrical resistance method-CORR 14848: December 18, 2003; |
|
BSI BS EN 13558 |
Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes |
|
BSI BS EN 13629 |
Wood flooring Solid pre-assembled hardwood board |
|
BSI BS EN 13920-11 |
Aluminium and aluminium alloys Scrap Part 11: Scrap consisting of aluminium-copper radiators |
|
BSI BS EN 13920-2 |
Aluminium and aluminium alloys Scrap Part 2: Unalloyed aluminium scrap |
|
BSI BS EN 13920-3 |
Aluminium and aluminium alloys Scrap Part 3: Wire and cable scrap |
|
BSI BS EN 13920-9 |
Aluminium and aluminium alloys Scrap Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials |
|
BSI BS EN 13957 |
Aluminium and aluminium alloys Extruded round, coiled tube for general applications Specification |
|
BSI BS EN 1402-4 |
Unshaped refractory products Part 4: Determination of consistency of castables-Supersedes DD ENV 1402-4: 2000; |
|
BSI BS EN 14057 |
Lead and lead alloys Scraps Terms and definitions |
|
BSI BS EN 14287 |
Aluminium and aluminium alloys Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components |
|
BSI BS EN 14936-1 |
Copper and copper alloys Determination of aluminium content Part 1: Titrimetric method |
|
BSI BS EN 14937-2 |
Copper and copper alloys Determination of antimony content Part 2: FAAS method |
|
BSI BS EN 15157 |
Advanced technical ceramics Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure Determination of fatigue properties at constant amplitude |
|
BSI BS EN 1735 |
Rubber- or Plastics- Coated Fabrics - Determination of Flexibility |
|
BSI BS EN 1893 |
Advanced technical ceramics Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure Determination of tensile properties-Supersedes DD ENV 1893:1996 |
|
BSI BS EN 1894 |
Advanced technical ceramics Mechanical properties of ceramic composites at high temperature under inert atmosphere Determination of shear strength by compression loading of notched specimens-Supersedes DD ENV 1894:1996 |
|
BSI BS EN 1905 |
Plastics Piping Systems - Unplasticized Poly(Vinyl Chloride) (PVC-U) Pipes, Fittings and Material - Method for Assessment of the PVC Content Based on Total Chlorine Content-Also Numbered as BS 2782-11: Method 1105C: 1999; |
|
BSI BS EN 21974 |
Paper - Determination of Tearing Resistance (Elmendorf Method) (ISO 1974: 1990) (AMD 8176) December 15, 1994 (Formerly BS 4468: 1990 Replaces BS 4468: 1969) (V)-Amd 1; |
|
BSI BS EN 23312 |
Sintered Metal Materials and Hardmetals - Determination of Young Modulus (ISO 3312: 1987) (V) |
|
BSI BS EN 23923-1 |
Metallic Powders - Determination of Apparent Density Part 1: Funnel Method (ISO 3923-1: 1979) (V) |
|
BSI BS EN 2431 |
Ethylene-Propylene Rubber (EPM/EPDM) Hardness 80 IRHD (V) |
|
BSI BS EN 24489 |
Sintered Hardmetals - Sampling and Testing (ISO 4489: 1978) (V) |
|
BSI BS EN 24937 |
Steel and Iron Determination of Chromium Content Potentiometric or Visual Titration Method-AMD 7082: July 15, 1992; ISO 4937: 1986; Supersedes BS 6200: Part 3: Section 3.10: Subsection 3.10.1: 1985; |
|
BSI BS EN 263 |
Crosslinked Cast Acrylic Sheets for Baths and Shower Trays for Domestic Purposes-Supersedes BS 7015: 1989; |
|
BSI BS EN 27627-4 |
Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry Part 4: Determination of Molybdenum, Titanium and Vanadium in Contents from 0.01 to 0.5 % (m/m) (ISO 7627-4: 1983) (V) |
|
BSI BS EN 278 |
Rubber Materials for Diaphragms in Domestic Appliances Using Combustible Gases up to 200 mbar |
|
BSI BS EN 31427 |
Determination of Silver in Silver Jewellery Alloys - Volumetric (Potentiometric) Method Using Potassium Bromide-AMD 8736: September 15, 1995; ISO 11427: 1993; |
|
BSI BS EN 541 |
Aluminium and Aluminium Alloys - Rolled Products for Cans, Closures and Lids - Specifications (V) |
|
BSI BS EN 611-1 |
Tin and Tin Alloys - Pewter and Pewterware Part 1: Pewter-BS 5140: 1974 Superseded by BS EN 611: Part 2: 1997, Together with BS EN 611: Part 1: 1996; |
|
BSI BS EN 62289 |
Video recording Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 compression Format D-10 |
|
BSI BS EN 713 |
Plastics Piping Systems - Mechanical Joints Between Fittings and Polyolefin Pressure Pipes - Test Method for Leaktightness Under Internal Pressure of Assemblies Subjected to Bending-AMD 8876: October 15, 1995; Also Known as BS 2782-11:Method 1123B:1995 |
|
BSI BS EN 725-12 |
Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 12: Chemical Analysis of Zirconia |
|
BSI BS EN 744 |
Plastics Piping and Ducting Systems - Thermoplastics Pipes - Test Method for Resistance to External Blows by the Round-the-Clock Method (V) |
|
BSI BS EN 820-1 |
Advanced technical ceramics Methods of testing monolithic ceramics Thermomechanical properties Part 1: Determination of flexural strength at elevated temperatures-Supersedes DD ENV 820-1:1994; |
|
BSI BS EN 820-3 |
Advanced technical ceramics Methods of testing monolithic ceramics Thermomechanical properties Part 3: Determination of resistance to thermal shock by water quenching-Supersedes DD ENV 820-3:1994 |
|
BSI BS EN 975-2 |
Sawn timber Appearance grading of hardwoods Part 2: Poplars |
|
BSI BS EN 993-15 |
Methods of test for dense shaped refractory products Part 15: Determination of thermal conductivity by the hot-wire (parallel) method |
|
BSI BS EN ISO 10352 |
Fibre-Reinforced Plastics - Moulding Compounds and Prepregs - Determination of Mass per Unit Area-AMD 9684: November 1997; Renumbers BS ISO 10352: 1997 |
|
BSI BS EN ISO 10724-1 |
Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 1: General Principles and Moulding of Multipurpose Test Specimens-CORR 13759:March 14,2002; Renumbers BS ISO 10724-1:1998; |
|
BSI BS EN ISO 11403-1 |
Plastics Acquisition and presentation of comparable multipoint data Part 1: Mechanical properties |
|
BSI BS EN ISO 11403-2 |
Plastics Acquisition and presentation of comparable multipoint data Part 2: Thermal and processing properties |
|
BSI BS EN ISO 11426 |
Determination of Gold in Gold Jewellery Alloys - Cupellation Method (Fire Assay)-Supersedes BS EN 31426: 1994; |
|
BSI BS EN ISO 120 |
Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Ammonia and Ammonium Compounds - Colorimetric Comparison Method-AMD 10254: October 1998; Renumbers BS 2782-4:Method 451D: 1978; ISO 120: 1977 |
|
BSI BS EN ISO 12017 |
Plastics - Poly(Methyl Methacrylate) Double- and Triple-Skin Sheets - Test Methods |
|
BSI BS EN ISO 12114 |
Fibre-Reinforced Plastics - Thermosetting Moulding Compounds and Prepregs - Determination of Cure Characteristics |
|
BSI BS EN ISO 12687 |
Metallic Coatings - Porosity Tests - Humid Sulfur (Flowers of Sulfur) Test |
|
BSI BS EN ISO 13846 |
Plastics Piping Systems - End-Load-Bearing and Non-End-Load Bearing Assemblies and Joints for Thermoplastics Pressure Piping - Test Method for Long-Term Leaktightness Under Internal Water Pressure-Also Numbered as BS 2782-11:Method 1111F:2001; |
|
BSI BS EN ISO 13927 |
Plastics Simple heat release test using a conical radiant heater and a thermopile detector-CORR 14507: May 23, 2003; Renumbers BS ISO 13927:2003; |
|
BSI BS EN ISO 14527-1 |
Plastics - Urea-Formaldehyde and Urea/Melamine-Formaldehyde Powder Moulding Compounds (UF- and UF/MF-PMCs) - Part 1: Designation System and Basis for Specifications |
|
BSI BS EN ISO 14528-1 |
Plastics - Melamine-Formaldehyde Powder Moulding Compounds (MF-PMCs) - Part 1: Designation System and Basis for Specifications |
|
BSI BS EN ISO 14529-3 |
Plastics - Melamine/Phenolic Powder Moulding Compounds (MP-PMCs) - Part 3: Requirements for Selected Moulding Compounds |
|
BSI BS EN ISO 14577-3 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks-CORR 14431: April 2, 2003; |
|
BSI BS EN ISO 15103-1 |
Plastics Poly(phenylene ether) (PPE) moulding and extrusion materials Part 1: Designation system and basis for specifications |
|
BSI BS EN ISO 15874-5 |
Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 5: Fitness for purpose of the system |
|
BSI BS EN ISO 182-2 |
Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to Evolve Hydrogen Chloride and any Other Acidic Products at Elevated Temperatures - Part 2: pH Method-AMD 10685: 4/2000; Renumbers BS 2782-1:Method 130B: 1991 |
|
BSI BS EN ISO 18753 |
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of absolute density of ceramic powders by pyknometer-Supersedes BS EN 725-7:1996 |
|
BSI BS EN ISO 18756 |
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method |
|
BSI BS EN ISO 2554 |
Plastics - Unsaturated Polyester Resins - Determination of Hydroxyl Value-AMD 10258: Feburary 1999; Renumbers BS 2782-4: Method 432C: 1997 |
|
BSI BS EN ISO 2898-1 |
Plastics - Plasticized Poly(Vinyl Chloride) (PVC-P) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-Amd 1; Amendment 10726 October 2000; Renumbers BS ISO 2898-1:1996; |
|
BSI BS EN ISO 3325 |
Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength-AMD 13886: October 9, 2002; Supersedes BS 5600-3-3.8: 1979 |
|
BSI BS EN ISO 3451-1 |
Plastics - Determination of Ash part 1: General Methods-Also Known as BS 2782-4:Method 470A:1997; Supersedes BS 2782-4: Method 470A: 1991 |
|
BSI BS EN ISO 3673-2 |
Plastics - Epoxy Resins - Part 2: Preparation of Test Specimens and Determination of Properties |
|
BSI BS EN ISO 3815-1 |
Zinc and zinc alloys Part 1: Analysis of solid samples by optical emission spectrometry-Together with BS EN ISO 3815-2:2005 supersedes BS EN 12019:1998 |
|
BSI BS EN ISO 4022 |
Powder metallurgical materials and products Part 3: Methods of testing sintered metal materials and products, excluding hardmetals Section 3.6 Determination of fluid permeability-AMD 16280: July 31, 2006;:1988 |
|
BSI BS EN ISO 4491-3 |
Metallic powders Determination of oxygen content by reduction methods Part 3: Hydrogen-reducible oxygen |
|
BSI BS EN ISO 4608 |
Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride for General Use - Determination of Plasticizer Absorption at Room Temperature-Supersedes BS 2782-4: METH 454E: 1992; Also Known as BS 2782-4: METH 454E: 1998 |
|
BSI BS EN ISO 4651 |
Cellular Rubbers and Plastics - Determination of Dynamic Cushioning Performance (AMD 8969) December 15, 1995 (V)-Amd 1; |
|
BSI BS EN ISO 5263-2 |
Pulps  Laboratory wet disintegration  Part 2: Disintegration of mechanical pulps at 20 Degrees C |
|
BSI BS EN ISO 6179 |
Rubber, Vulcanized or Thermoplastic - Rubber Sheets and Rubber-Coated Fabrics - Determination of Transmission Rate of Volatile Liquids (Gravimetric Technique)-AMD 13022: April 2001; Renumbers BS ISO 6179:1998 |
|
BSI BS EN ISO 6401 |
Plastics Homopolymer and copolymer resins of vinyl chloride Determination of residual vinyl chloride monomer Gas chromatographic method |
|
BSI BS EN ISO 7808 |
Plastics - Thermosetting Moulding Materials - Determination of Transfer Flow-AMD 10348: April 1999; Renumbers BS 2782: Part 7: Method 722A: 1993 |
|
BSI BS EN ISO 7823-3 |
Plastics  Poly(methyl methacrylate) sheets  Types, dimensions and characteristics  Part 3: Continuous cast sheets |
|
BSI BS EN ISO 8494 |
Metallic materials Tube Flanging test-Supersedes BS EN 10235:1994 |
|
BSI BS EN ISO 8496 |
Metallic materials Tube Ring tensile test-Supersedes BS EN 10237:1994 |
|
BSI BS EN ISO 8987 |
Plastics Phenolic resins Determination of reactivity on a B-transformation test plate |
|
BSI BS EN ISO 8989 |
Plastics - Liquid Phenolic Resins - Determination of Water Miscibility-Also Numbered as BS 2782-4: Method 451T: 1998; |
|
BSI BS ISO 10378 |
Copper, lead and zinc sulfide concentrates Determination of gold and silver Fire assay gravimetric and flame atomic absorption spectrometric method |
|
BSI BS ISO 11358-2 |
Plastics Thermogravimetry (TG) of polymers Part 2: Determination of activation energy |
|
BSI BS ISO 11438-1 |
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method Part 1: General Requirements and Sample Dissolution (V) |
|
BSI BS ISO 11533 |
Iron Ores - Determination of Cobalt Content - Flame Atomic Absorption Spectrometric Method (V) |
|
BSI BS ISO 11907-1 |
Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 1: Guidance |
|
BSI BS ISO 1268-3 |
Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 3: Wet Compression Moulding-AMD 13342: September 19 2001; |
|
BSI BS ISO 13741-2 |
Plastics/Rubber - Polymer Dispersions and Rubber Latices (Natural and Synthetic) - Determination of Residual Monomers and Other Organic Components by Capillary Column Gas Chromatography - Part 2: Headspace Method |
|
BSI BS ISO 13774 |
Rubber and Plastics Hoses for Fuels For Internal Combustion Engines - Method of Test for Flammability |
|
BSI BS ISO 14558 |
Rubber - Determination of Residual Unsaturation of Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectroscopy |
|
BSI BS ISO 14663-1 |
Plastics Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Part 1: Designation system and basis for specifications |
|
BSI BS ISO 15113 |
Rubber - Determination of Frictional Properties |
|
BSI BS ISO 15350 |
Steel and Iron - Determination of Total Carbon and Sulfur Content - Infrared Absorption Method After Combustion in an Induction Furnace (Routine Method) |
|
BSI BS ISO 15672 |
Rubber and Rubber Additives - Determination of Total Nitrogen Content Using an Automatic Analyser |
|
BSI BS ISO 15987 |
Plastics Film and sheeting Biaxially oriented polyamide (nylon) films |
|
BSI BS ISO 16014-4 |
Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 4: High-temperature method |
|
BSI BS ISO 16124 |
Steel wire rod Dimensions and tolerances |