|
BSI BS ISO 16929 |
Plastics Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test |
|
BSI BS ISO 17564 |
Nitrile Rubber - Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value |
|
BSI BS ISO 17771 |
Plastics Thermoset moulding compounds Determination of the degree of fibre wetting in SMC |
|
BSI BS ISO 18852 |
Rubber compounding ingredients Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA) |
|
BSI BS ISO 20508 |
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of light transmittance of ceramic films with transparent substrate |
|
BSI BS ISO 20805 |
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming |
|
BSI BS ISO 20965 |
Plastics Determination of the transient extensional viscosity of polymer melts |
|
BSI BS ISO 23671 |
Passenger car tyres Method for measuring relative wet grip performance Loaded new tyres |
|
BSI BS ISO 2561 |
Plastics Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography-Supersedes (BS 2782PT4: METH 453A):1978 |
|
BSI BS ISO 3865 |
Rubber, Vulcanized or Thermoplastic - Methods of Test for Staining in Contact with Organic Material-Supersedes BS 903-A33:1985; Also Known as BS 903-A33: 1998 |
|
BSI BS ISO 3899 |
Rubber Nitrile latex Determination of residual acrylonitrile content-Supersedes BS 6057-3.22: 1990 |
|
BSI BS ISO 4433-4 |
Thermoplastics Pipes - Resistance to Liquid Chemicals - Classification Part 4: Poly(Vinylidene Fluoride) (PVDF) Pipes-CORR 9996; April 1998; Also Numbered as BS 2782: Part 11: Method 1161D: 1998; |
|
BSI BS ISO 4689-2 |
Iron ores Determination of sulfur content Part 2: Combustion/titration method |
|
BSI BS ISO 4695 |
Iron Ores - Determination of Reducibility (V) |
|
BSI BS ISO 7792-1 |
Plastics - Thermoplastic Polyester (TP) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-Renumbered as BS EM OSP 7792-1:2004 |
|
BSI BS ISO 8008 |
Aluminium oxide primarily used for the production of aluminium Determination of specific surface area by nitrogen adsorption-:1987 |
|
BSI BS ISO 8371 |
Iron Ores - Determination of Decrepitation Index (V) |
|
BSI BS ISO 8584-1 |
Thermoplastics Pipes for Industrial Applications under Pressure - Determination of the Chemical Resistance Factor and of the Basic Stress Part 1: Polyolefin Pipes-Also Known as BS 2782: Part 11: Methods 1160A and B: 1998 |
|
BSI BS ISO 8605 |
Textile-Glass-Reinforced Plastics - Sheet Moulding Compound (SMC) - Basis for Specification |
|
BSI BS ISO 9682-2 |
Iron ores Determination of manganese content Part 2: Periodate spectrophotometric method |
|
BSI BS ISO 9727-3 |
Cylindrical cork stoppers Physical tests Part 3: Determination of humidity content |
|
BSI BS ISO 9727-4 |
Cylindrical cork stoppers Physical tests Part 4: Determination of dimensional recovery after compression |
|
BSI BS ISO TR 11444 |
Quality of Sawn Wood Used for the Construction of Pallets (V) |
|
BSI BS ISO TR 6809 |
Rubber Compounding Ingredients - Carbon Black - Standard Reference Blacks |
|
BSI DD CEN/TS 1071-11 |
Advanced technical ceramics Methods of test for ceramic coatings Part 11: Determination of internal stress by the Stoney formula |
|
BSI DD CEN/TS 1159-4 |
Advanced technical ceramics Ceramic composites Thermophysical properties Part 4: Determination of thermal conductivity |
|
BSI DD CEN/TS 14938-2 |
Copper and copper alloys Determination of bismuth content Part 2: FAAS method |
|
BSI DD ENV 12038 |
Durability of Wood and Wood-Based Products - Wood-Based Panels - Method of Test for Determining the Resistance Against Wood-Destroying Basidiomycetes |
|
BSI DD ENV 12908 |
Lead and Lead Alloys - Analysis by Optical Emission Spectrometry (OES) with Spark Excitation |
|
BSI DD ENV 14186 |
Advanced technical ceramics Ceramic composites Mechanical properties at room temperature, determination of elastic properties by an ultrasonic technique |
|
BSI DD ENV 14464 |
Sawn timber - Method for assessment of case-hardening-CORR 14508: May 28, 2003; |
|
BSI DD ISO/TS 7821 |
Tobacco and tobacco products Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods-:1983 |
|
BSI PD 6641 |
Copper and Copper Alloys - Compendium of Compositions and Products-AMD 12064:July 2001; |
|
BSI PD CEN/TR 15314 |
Durability of wood and wood-based products Quantitative determination of quaternary ammonium compounds in wood |
|
BSI PD CR 14244 |
Durability of Wood and Wood-Based Products - Recommendations for Measurement of Emissions to the Environment from Treated Wood in Service |
|
BSI BS 5293 PART 21 |
Sampling and Testing Carbon Black for Use in the Rubber Industry Part 21: Classification System for Carbon Blacks Used in Rubber Products (ISO/TR 12245: 1994) (V) |
|
BSI BS 5293-12 |
Sampling and Testing Carbon Black for Use in the Rubber Industry - Part 12: Methods for Determination of Surface Area by Surfactant Adsorption (ISO 6810: 1995) (V)-ISO 6810:1995 |
|
BSI BS 5293-2 |
Sampling and Testing Carbon Black for Use in the Rubber Industry Part 2: Method for Determination of Pour Density (ISO 1306: 1995) (V)-ISO 1306:1995 |
|
BSI BS 5293-4 |
Sampling and Testing Carbon Black for Use in the Rubber Industry Part 4: Method for Determination of Pellet Size Distribution-ISO 8511:1995 |
|
BSI BS 5738 |
Evaluation of Vulcanization Characteristics for Raw Natural Rubbers |
|
BSI BS 5805 |
Method for Thermal Classification for Phlogopite Mica Splittings |
|
BSI BS 5923-2 |
Methods for Chemical analysis of rubber - Part 2: EDTA titrimetric method for determination of zinc content of rubber products-Partially Supersedes BS 903 Part B13: 1964 |
|
BSI BS 6043 SEC 1.3 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.3: Determination of Softening Point (Ring and Ball Method) |
|
BSI BS 6043 SEC 1.5 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.5: Determination of Content of Quinoline-Insoluble Material |
|
BSI BS 6043 SEC 1.8 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.8: Determination of Ash |
|
BSI BS 6043 SEC 2.16 |
Methods of Sampling and Test for Carbonaceous Materials for Use in Aluminium Manufacture - Part 2: Electrode Coke - Section 2.16: Determination of Water Content of Calcined Coke-ISO 11412: 1998; |
|
BSI BS 6043 SEC 2.6 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 2: Electrode Coke Section 2.6: Determination of the Density in Xylene of Calcined Coke |
|
BSI BS 6043 SEC 2.8 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 2: Electrode Coke Section 2.8: Determination of Oil Content by Solvent Extraction of Calcined Coke |
|
BSI BS 6043 SEC 4.11 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 4: Cold Ramming Pastes Section 4.11: Determination of the Thermal Expansion of Baked Rammed Paste |
|
BSI BS 6043 SEC 4.13 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 4: Cold Ramming Pastes Section 4.13: Determination of Ash of Baked Rammed Paste |
|
BSI BS 6043 SEC 4.5 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 4: Cold Ramming Pastes Section 4.5: Determination of Water Content of Unbaked Pastes |
|
BSI BS 6043 SEC 4.8 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 4: Cold Ramming Pastes Section 4.8: Determination of Electrical Resistivity of Baked Rammed Paste |
|
BSI BS 6043-1-1 |
Methods of Sampling and Test for Carbonaceous Materials Used in Alumnium Manufacture - Part 1: Electrode Pitch - Section 1.1: Sampling-ISO 6257: 2002; |
|
BSI BS 6043-1-7 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.7: Determination of Apparent Density (Bouyancy Method) |
|
BSI BS 6043-3.4 |
Methods of sampling and test for raw materials used in aluminium manufacture - Part 3: Electrodes - Section 3.4: Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes using a hydrostatic method-ISO 12985-2: 2000 |
|
BSI BS 6057 PT 3: SEC 3.25 |
Rubber Latices Part 3: Methods of Test Section 3.25: Determination of Alkalinity for Polychloroprene Latex-ISO 13773: 1997; |
|
BSI BS 6057 SEC 3.19 |
Rubber Latices Part 3: Methods of Test Section 3.19: Determination of Total Bound Styrene Content of Reinforced Styrene-Butadiene Rubber Latices |
|
BSI BS 6057 SEC 3.5 |
Rubber Latices - Part 3: Methods of Test - Section 3.5: Determination of KOH Number of Natural Rubber Latices-Also known as ISO 127: 1995; AMD 16244:4/28/2006 |
|
BSI BS 6057 SEC 3.7 |
Rubber Latices Part 3: Methods of Test Section 3.7: Determination of Density of Natural Rubber Latices (ISO 705: 1994) (V) |
|
BSI BS 6128 PART 13 |
Industrial Laminated Rods and Tubes Based on Thermosetting Resins Part 13: Specification for Rectangular Moulded Tubes |
|
BSI BS 6128 PART 4 |
Industrial Laminated Rods and Tubes Based on Thermosetting Resins Part 4: Rectangular Moulded Rods |
|
BSI BS 6200 SEC 6.2 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals: Part 6: Guidelines on Atomic Absorption Spectrometric Techniques: Section 6.2: Recommendation for the Application of Flame Atomic Absorption Spectrometry in Standard Methods for the Chemical Analysis of Iron and Steel |
|
BSI BS 6200 SUB SEC 3.12.4 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.12: Determination of Copper Subsection 3.12.4: Cast Iron: Volumetric Method-Replaces Method 5 for the Determination of Copper in Handbook 19: 1970; |
|
BSI BS 6200 SUB SEC 3.22.4 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.22: Determination of Nitrogen Subsection 3.22.4: Thermal Conductimetric Method After Fusion in a Current of Inert Gas-ISO 10720: 1997; |
|
BSI BS 6200 SUB SEC 3.26.2 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.26: Determination of Silicon Subsection 3.26.2: Acid-Resisting High Silicon Iron: Gravimetric Method |
|
BSI BS 6200 SUB SEC 3.26.5 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals: Part 3: Methods of Analysis: Section 3.26: Determination of Silicon: Subsection 3.26.5: Ferrosilicon, Ferrosilicomanganese and Ferrosilicochromium: Gravimetric Method |
|
BSI BS 6200 SUB SEC 3.28.3 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.28 Determination of Sulfur Subsection 3.28.3: Steel and Iron: Spectrophotometric Method (ISO 10701: 1994) (V) |
|
BSI BS 6200 SUB SEC 3.32.4 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.32: Determination of Titanium Subsection 3.32.4: Ferrotitanium: Volumetric Method |
|
BSI BS 6200 SUB SEC 3.33.2 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section: 3.33: Determination of Tungsten Subsection 3.33.2: Steel: Spectrophotometric Method |
|
BSI BS 6200-3.1.4 |
Sampling and analysis of iron, steel and other ferrous metals Part 3: Methods of analysis Section 3.1 Determination of aluminium Subsection 3.1.4 Non-alloyed steel: flame atomic absorption spectrometric method-AMD 7087:July 1992; EN 29658:1991; ISO 9658:1990 |
|
BSI BS 6200-3.26.3 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.26: Determination of Silicon Subsec 3.26.3: Steel and Cast Iron: Spectrophotometric Method for Silicon Contents from 0.05% (m/m) to 1.0% (m/m) (ISO 4829/1: 1986) (AMD 7077) February 28, 1992 (V)-Amd 1; |
|
BSI BS 6200-3.28.2 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.28: Determination of Sulfur Subsection 3.28.2: Steel and Cast Iron: Infra-Red Absorption Method AfterCombustion in an Induction Furnace-AMD 7080) February 28, 1992; ISO 4935: 1989 |
|
BSI BS 6200SUB SEC 3.8.5 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.8: Determination of Carbon Subsection 3.8.5: Cast Iron and Pig Iron: Gravimetric Method for the Determination of Non-Combined Carbon-Read in Conjunction with BS EN 10036; Replaces Method 2 for the Determination of Carbon in Handbook No. 19: 1970; |
|
BSI BS 6534 |
Quantitative Determination of Lead in Tin Coatings |
|
BSI BS 6630 |
Identification of Antidegradants in Rubber and Rubber Products by Thin Layer Chromatography (ISO 4645-1984) (AMD 6698) April 30, 1991-Amd 1; |
|
BSI BS 6721 PART 10 |
Sampling and Analysis of Copper and Copper Alloys Part 10: Method for Determination of Chromium in Copper Alloys: Titrimetric Method (ISO 6437: 1984) (V) |
|
BSI BS 6721 PART 6 |
Sampling and Analysis of Copper and Copper Alloys Part 6: Method for Determination of Phosphorus in Copper and Copper Alloys by Spectrophotometry (ISO 4741: 1984) (V) |
|
BSI BS 6783 PART 12 |
Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 12: Method for the Determination of Phosphorus in Nickel Alloys by Molybdenum Blue Molecular Absorption Spectrometry (ISO 9388: 1992) |
|
BSI BS 6783 PART 13 |
Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 13: Method for the Detn. of Phosphorus in Nickel, Ferronickel and Nickel Alloys by Phosphovanadomolybdate Molecular Absorption Spectrometry (ISO 11400: 1992) |
|
BSI BS 6783 PART 14 |
Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 14: Method for the Determination of Total Boron Content of Nickel, and Nickel Alloys by Curcumin Molecular Absorption Spectrometry (ISO 11436:1993) (V) |
|
BSI BS 6783 PART 3 |
Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 3: Method for Determination of Cobalt in Ferronickel by Flame Atomic Absorption Spectrometry (ISO 7520: 1985) (AMD 6992) February 28, 1992 (V)-Amd 1; |
|
BSI BS 6783 PART 8 |
Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 8: Method for Determination of Sulphur in Nickel, Ferronickel and Nickel Alloys by Iodimetric Titration After Induction Furnace Combustion (ISO 7527: 1985) (AMD 6994) February 28, 1992 (V)-Amd 1; |
|
BSI BS 6882 |
Storage of Raw Solid Natural and Synthetic Rubber |
|
BSI BS 7034 PART 1 |
Viscosity and Viscometric Fixed Points of Glass Part 1: Recommendations for Use in the Determination of Viscosity and Viscometric Fixed Points |
|
BSI BS 7034 PART 3 |
Viscosity and Viscometric Fixed Points of Glass Part 3: Method for the Determination of Viscosity by Fibre Elongation Viscometer (ISO 7884/3: 1987) |
|
BSI BS 7034 PART 6 |
Viscosity and Viscometric Fixed Points of Glass Part 6: Method for the Determination of Softening Point |
|
BSI BS 7164 PART 14 |
Chemical Tests for Raw and Vulcanized Rubber Part 14: Methods for Determination of Carbon Black Content (ISO 1408: 1995) (V) |
|
BSI BS 7164 PART 25 |
Chemical Tests for Raw and Vulcanized Rubber Part 25: Method for Determination of Sulfide Sulfur Content (ISO 8054: 1996) (V) |
|
BSI BS 7164 PART 8 |
Chemical Tests for Raw and Vulcanized Rubber Part 8: Method for Determination of Dirt Content of Raw Natural Rubber (ISO 249: 1995) |
|
BSI BS 7164 SEC 29.1 |
Chemical Tests for Raw and Vulcanized Rubber Part 29: Methods for Determination of Zinc Content Section 29.1: Atomic Absorption Spectrometry (ISO 6101-1: 1991) (V) |
|
BSI BS 7164-24 |
Chemical tests for raw and vulcanized rubber Part 24: Determination of free sulfur-CORR 13980: December 10, 2002; ISO 7269: 1995; |
|
BSI BS 7424 |
Determination of the Bending Stiffness of Paper and Board by Static Methods (ISO 5628: 1990) |
|
BSI BS 7455 PART 1 |
Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 1: General Requirements and Sample Dissolution (ISO 7530-1: 1990) (AMD 7216) August 15, 1992 (V)-Amd 1; |
|
BSI BS 7455 PART 2 |
Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 2: Method for the Determination of Cobalt (ISO 7530-2: 1990) |
|
BSI BS 7455 PART 3 |
Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 3: Method for the Determination of Chromium (ISO 7530-3: 1990) |
|
BSI BS 7455 PART 4 |
Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 4: Method for the Determination of Copper (ISO 7530-4: 1990) |
|
BSI BS 7455 PART 6 |
Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 6: Method for the Determination of Manganese (ISO 7530-6: 1990) |
|
BSI BS 7455 PART 7 |
Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 7: Method for Determination of Aluminium (ISO 7530-7: 1992) |
|
BSI BS 7455 PART 8 |
Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 8: Method for Determination of Silicon (ISO 7530-8: 1992) |
|
BSI BS 7604 PART 2 |
Method for Determination of Stress-Optical Coefficient of Glass Part 2: Bending Test (ISO 10345-2: 1992) |
|
BSI BS 7709 PART 2 |
Analysis of Extract Solutions of Glass Part 2: Method for Determination of Sodium Oxide and Potassium Oxide by Flame Spectrometric Methods (ISO 10136-2: 1993) (V) |
|
BSI BS 7825 PT 3: SEC 3.1 |
Calibration of Rubber and Plastics Test Equipment Part 3: Calibration Schedules Section 3.1: Thermal Properties |
|
BSI BS 7825 SEC 3.2 |
Calibration of Rubber and Plastics Test Equipment Part 3: Calibration Schedules Section 3.2: Electrical Properties |
|
BSI BS 7825 SEC 3.3 |
Calibration of Rubber and Plastics Test Equipment Part 3: Calibration Schedules Section 3.3: Mechanical Properties of Plastics |
|
BSI BS 7926 |
Quantitative Micrographic Methods to Determine the Percentage Content of Non-Metallic Inclusions in Cast Steel |
|
BSI BS 7954 |
Beaded Desiccant Activated Alumina - Specification |
|
BSI BS EN 1007-3 |
Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area-Supersedes DD ENV 1007-3: 1994; |
|
BSI BS EN 1007-5 |
Advanced Technical Ceramics - Ceramic Composites - Methods of Test for Reinforcements - Part 5: Determination of Distribution of Tensile Strength and of Tensile Strain to Failure of Filaments within a Multifilament Tow at Ambient Temperature-Supersedes DD ENV 1007-5:1998; |
|
BSI BS EN 1148 |
Heat exchangers - Water-to-water heat exchangers for district heating - Test procedures for establishing the performance data-AMD 15784: March, 2006; Supersedes DD ENV 1148: 1994 |
|
BSI BS EN 12095 |
Plastics Piping Systems - Brackets for Rainwater Piping Systems - Test Method for Bracket Strength-Also Numbered as BS 2782: Part 11: Method 1111Q: 1997; |
|
BSI BS EN 12117 |
Plastics Piping Systems - Fittings, Valves and Ancillaries - Determination of Gaseous Flow Rate/Pressure Drop Relationships-Also Numbered as BS 2782: Part 11: Method 1121G: 1998; |
|
BSI BS EN 12256 |
Plastics Piping Systems - Thermoplastics Fittings - Test Method for Mechanical Strength or Flexibility of Fabricated Fittings-Also Known as BS 2782-11: Method 1111F: 1998 |
|
BSI BS EN 12258-3 |
Aluminium and aluminium alloys Terms and definitions Part 3: Scrap |
|
BSI BS EN 1226 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Test Method to Prove the Resistance to Initial Ring Deflection-Also Known as BS 2782-12:METH 1214E:1996 |
|
BSI BS EN 1229 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Test Methods to Prove the Leaktightness of the Wall Under Short-Term Internal Pressure-Also known as BS 2782-12: Method 1223A&B; |
|
BSI BS EN 12290 |
Advanced technical ceramics Mechanical properties of ceramic composites at high temperature under inert atmosphere Determination of compression properties |
|
BSI BS EN 12293 |
Plastics Piping Systems - Thermoplastics Pipes and Fittings for Hot and Cold Water - Test Method for the Resistance of Mounted Assemblies to Temperature Cycling-Also Known a BS 2782-11: Method 1123T:2000; |
|
BSI BS EN 12421 |
Magnesium and Magnesium Alloys - Unalloyed Magnesium |
|
BSI BS EN 12441-2 |
Zinc and zinc alloys Chemical analysis Part 2: Determination of magnesium in zinc alloys Flame atomic absorption spectrometric method-AMD 15268:July 20, 2004; AMD 15398:January 21, 2005; Supersedes BS 3630-15:1976 |
|
BSI BS EN 12441-4 |
Zinc and zinc alloys Chemical analysis Part 4: Determination of iron in zinc alloys Spectrophotometric method |
|
BSI BS EN 12479 |
Wood Poles for Overhead Lines - Sizes - Methods of Measurement and Permissible Deviations |
|
BSI BS EN 12575 |
Plastics - Thermoset Moulding Compounds - Determination of the Degree of Fibre Wet Out in SMC |
|
BSI BS EN 12789 |
Advanced technical ceramics Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure Determination of flexural strength-Supersedes DD ENV 12789:1998; |
|
BSI BS EN 12877-4 |
Colouring Materials in Plastics - Determination of Colour Stability to Heat During Processing of Colouring Materials in Plastics - Part 4: Determination by Two-Roll Milling |
|
BSI BS EN 12938 |
Methods for the Analysis of Pewter - Determination of Alloying and Impurity Element Contents by Atomic Spectrometry-CORR 12045: August 2001; |
|
BSI BS EN 1309-2 |
Round and sawn timber Method of measurement of dimensions Part 2: Round timber Requirements for measurement and volume calculation rules |
|
BSI BS EN 13144 |
Metallic and other inorganic coatings Method for quantitative measurement of adhesion by tensile test |
|
BSI BS EN 13147 |
Copper and Copper Alloys - Determination of Residual Stresses in the Border Area of Slit Strip |
|
BSI BS EN 13228 |
Wood flooring Solid wood overlay flooring elements including blocks with an interlocking system |
|
BSI BS EN 13245-1 |
Plastics Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications Part 1: Designation of light coloured profiles |
|
BSI BS EN 13283 |
Zinc and zinc alloys - Secondary zinc |
|
BSI BS EN 13307-1 |
Timber blanks and semi-finished profiles for non-structural uses Part 1: Requirements |
|
BSI BS EN 13353 |
Solid wood panels (SWP) Requirements |
|
BSI BS EN 13442 |
Wood and parquet flooring and wood panelling and cladding Determination of the resistance to chemical agents |
|
BSI BS EN 13489 |
Wood flooring Multi-layer parquet elements |
|
BSI BS EN 13523-21 |
Coil coated metals Test methods Part 21: Evaluation of outdoor exposed panels |
|
BSI BS EN 13879 |
Wood-Based Panels - Determination of Edgewise Bending Properties |
|
BSI BS EN 13920-10 |
Aluminium and aluminium alloys Scrap Part 10: Scrap consisting of used aluminium beverage cans |
|
BSI BS EN 13920-12 |
Aluminium and aluminium alloys Scrap Part 12: Turnings consisting of one single alloy |
|
BSI BS EN 13920-15 |
Aluminium and aluminium alloys Scrap Part 15: Decoated aluminium scrap from post-consumer aluminium packagings |
|
BSI BS EN 13920-16 |
Aluminium and aluminium alloys Scrap Part 16: Scrap consisting of skimmings, drosses, spills and metallics |
|
BSI BS EN 13920-6 |
Aluminium and aluminium alloys Scrap Part 6: Scrap consisting of two or more wrought alloys |
|
BSI BS EN 13920-7 |
Aluminium and aluminium alloys Scrap Part 7: Scrap consisting of castings |
|
BSI BS EN 13920-8 |
Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes-CORR 14489: May 16, 2003; |
|
BSI BS EN 13981-1 |
Aluminium and aluminium alloys Products for structural railway applications Technical conditions for inspection and delivery Part 1: Extruded products |
|
BSI BS EN 13981-2 |
Aluminium and aluminium alloys Products for structural railway applications Technical conditions for inspection and delivery Part 2: Plates and sheets |
|
BSI BS EN 1402-8 |
Unshaped refractory products Part 8: Determination of complementary properties-Supersedes DD ENV 1402-8:1999; |
|
BSI BS EN 14081-3 |
Timber structures Strength graded structural timber with rectangular cross section Part 3: Machine grading; additional requirements for factory production control-Together with BS EN 14081-1: 2005 and BS EN 14081-3: 2006 Supersedes BS EN 518: 1995 and BS EN 519: 1995 |
|
BSI BS EN 14323 |
Wood-based panels Melamine faced boards for interior uses Test methods |
|
BSI BS EN 14447 |
Fibre reinforced plastics Glass mat reinforced thermoplastics (GMT) Determination of flowability and solidification |
|
BSI BS EN 14519 |
Solid softwood panelling and cladding Softwood machined profiles with tongue and groove |
|
BSI BS EN 14936-2 |
Copper and copper alloys Determination of aluminium content Part 2: FAAS method |
|
BSI BS EN 14939 |
Copper and copper alloys Determination of beryllium content FAAS method |
|
BSI BS EN 14942-2 |
Copper and copper alloys Determination of arsenic content Part 2: FAAS method |
|
BSI BS EN 15146 |
Solid softwood panelling and cladding Machined profiles without tongue and groove |
|
BSI BS EN 1669 |
Aluminium and Aluminium Alloys - Test Methods - Earing Test for Sheet and Strip |
|
BSI BS EN 1680 |
Plastics Piping Systems - Valves for Polyethylene (PE) Piping Systems - Test Method for Leaktightness Under and After Bending Applied to the Operating Mechanism-Also Known as BS 2782: Part 11: Method 1133A:1997; |
|
BSI BS EN 1989 |
Thermoplastics Piping Systems - Joints for Buried Non-Pressure Sewerage Applications - Test Method for Long-Term Sealing Performance of Joints with Thermoplastic Elastomer (TPE) Seals by Estimating the Sealing Pressure-Also Known as BS 2782-11:METH 1112E:2000 |
|
BSI BS EN 234 |
Wallcoverings in Roll Form - Specification for Wallcoverings for Subsequent Decoration |
|
BSI BS EN 2378 |
Fibre Reinforced Plastics Determination of Water Absorption by Immersion (V) |
|
BSI BS EN 24491-4 |
Metallic Powders - Determination of Oxygen Content by Reduction Methods Part 4: Total Oxygen by Reduction-Extraction (ISO 4491-4: 1989) (V) |
|
BSI BS EN 24496 |
Metallic Powders - Determination of Acid Insoluble Content in Iron, Copper, Tin and Bronze Powders (ISO 4496: 1978) (V) |
|
BSI BS EN 24503 |
Hardmetals - Determination of Contents of Metallic Elements by X-Ray Fluorescence - Fusion Method (ISO 4503: 1978) (V) |
|
BSI BS EN 24883 |
Hardmetals - Determination of Contents of Metallic Elements by X-Ray Fluorescence - Solution Method (ISO 4883: 1978) (V) |
|
BSI BS EN 27627-3 |
Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry Part 3: Determination of Cobalt, Iron, Manganese and Nickel in Contents from 0.01 to 0.5 % (m/m) (ISO 7627-3: 1983) (V) |
|
BSI BS EN 28049 |
Ferronickel Shot - Sampling for Analysis (ISO 8049: 1988) |
|
BSI BS EN 28659 |
Thermoplastics Valves - Fatigue Strength - Test Method (ISO 8659: 1989) |
|
BSI BS EN 479 |
Unplasticized Polyvinylchloride (PVC-U) Profiles for the Fabrication of Windows and Doors - Determination of Heat Reversion |
|
BSI BS EN 513 |
Unplasticized Polyvinylchloride (PVC-U) Profiles for the Fabrication of Windows and Doors - Determination of the Resistance to Artificial Weathering |
|
BSI BS EN 577 |
Aluminium and Aluminium Alloys - Liquid Metal - Specifications (V) |
|
BSI BS EN 60674-1 |
Plastic Films for Electrical Purposes Part 1: Definitions and General Requirements-AMD 10058: July 1998; Renumbers BS 7290: Part 1: 1990 |
|
BSI BS EN 637 |
Plastics Piping Systems - Glass-Reinforced Plastics Components - Determination of the Amounts of Constituents Using the Gravimetric Method-Also Known as BS 2782-12: METH 1205A: 1995 |
|
BSI BS EN 683-3 |
Aluminium and aluminium alloys Finstock Part 3: Tolerances on dimensions and form |
|
BSI BS EN 725-1 |
Advanced Technical Ceramics - Methods of Test for Ceramic Powders Part 1: Determination of Impurities in Alumina |
|
BSI BS EN 725-10 |
Advanced Technical Ceramics - Methods of Test for Ceramic Powders Part 10: Determination of Compaction Properties |
|
BSI BS EN 820-2 |
Advanced technical ceramics Methods of testing monolithic ceramics Thermo-mechanical properties Part 2: Determination of self-loaded deformation-Supersedes DD ENV 820-2:1994 |
|
BSI BS EN 975-1 |
Sawn Timber - Appearance Grading of Hardwoods Part 1: Oak and Beech-AMD 10982; November 2000; |
|
BSI BS EN 993-19 |
Methods of test for dense shaped refractory products Part 19: Determination of thermal expansion by a differential method-CORR 17138: June 29, 2007 |
|
BSI BS EN ISO 1060-2 |
Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride - Part 2: Preparation of Test Samples and Determination of Properties |
|
BSI BS EN ISO 10724-2 |
Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 2: Small Plates-AMD 13401: October 23, 2001; Renumbers BS ISO 10724-2: 1998; ISO 10724-2:1998 |
|
BSI BS EN ISO 11210 |
Determination of Platinum in Platinum Jewellery Alloys - Gravimetric Method After Precipitation of Diammonium Hexachloroplatinate (V) |
|
BSI BS EN ISO 11542-2 |
Plastics - Ultra-High-Molecular-Weight Polyethylene (PE-UHMW) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties |
|
BSI BS EN ISO 11667 |
Fibre Reinforced Plastics - Mouldings Compounds and Prepregs - Determination of Resin, Reinforcement-Fibre and Mineral-Filler Content - Dissolution Methods-AMD 10676: April 2000; Renumbers BS ISO 11667: 1997 |
|
BSI BS EN ISO 1265 |
Plastics Poly(vinyl chloride) resins Determination of number of impurities and foreign particles |
|
BSI BS EN ISO 13468-2 |
Plastics Determination of the total luminous transmittance of transparent materials Part 2: Double-beam instrument-Renumbers BS ISO 13468-2:1999; AMD 16335:July 31, 2006 |
|
BSI BS EN ISO 13844 |
Plastics Piping Systems - Elastomeric-Sealing-Ring-Type Socket Joints of Unplasticized Poly (Vinyl Chloride)(PVC-U) for Use with PVC-U Pipes - Test Method for Leaktightness under Negative Pressure-Also Known as BS 2782-11: Method 1123D:2000; |
|
BSI BS EN ISO 14129 |
Fibre-Reinforced Plastic Composites - Determination of the In-Plane Shear Stress/Shear Strain Response, Including the In-Plane Shear Modulus and Strength by the Plus or Minus 45 Degree Tension Test Method |
|
BSI BS EN ISO 14527-2 |
Plastics - Urea-Formaldehyde and Urea/Melamine-Formaldehyde Powder Moulding Compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties |
|
BSI BS EN ISO 14528-2 |
Plastics - Melamine-Formaldehyde Powder Moulding Compounds (MF-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties |
|
BSI BS EN ISO 14529-1 |
Plastics - Melamine/Phenolic Powder Moulding Compounds (MP-PMCs) - Part 1: Designation System and Basis for Specifications |
|
BSI BS EN ISO 14910-2 |
Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties-AMD 16024: August 2006;: 1997 |
|
BSI BS EN ISO 15103-2 |
Plastics Poly(phenylene ether) (PPE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
|
BSI BS EN ISO 15252-2 |
Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties |
|
BSI BS EN ISO 15252-3 |
Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 3: Requirements for Selected Moulding Compounds |
|
BSI BS EN ISO 15526-1 |
Plastics Polyketone (PK) moulding and extrusion materials Part 1: Designation system and basis for specifications |
|
BSI BS EN ISO 15526-2 |
Plastics Polyketone (PK) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
|
BSI BS EN ISO 1622-1 |
Plastics - Polystyrene (PS) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-AMD 10645: 3/2000; Renumbers BS ISO 1622-1: 1994 |
|
BSI BS EN ISO 16871 |
Plastics piping and ducting systems Plastics pipes and fittings Method for exposure to direct (natural) weathering-CORR 14780: October 8, 2003; |
|
BSI BS EN ISO 20200 |
Plastics Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test |
|
BSI BS EN ISO 2535 |
Plastics Unsaturated polyester resins Measurement of gel time at ambient temperature |
|
BSI BS EN ISO 3344 |
Reinforcement Products - Determination of Moisture Content |
|
BSI BS EN ISO 3672-2 |
Plastics - Unsaturated-Polyester Resins (UP-R) - Part 2: Preparation of Test Specimens and Determination of Properties-CORR 13916: May 14, 2002; Renumbers BS ISO 3672-2:2000; |
|
BSI BS EN ISO 3927 |
Metallic Powders, Excluding Powders for Hardmetals - Determination of Compressibility in Uniaxial Compression-CORR 13743: March 11, 2002; Supersedes BS EN 23927:1993 |
|
BSI BS EN ISO 4577 |
Plastics - Polypropylene and Propylene-Copolymers - Determination of Thermal Oxidative Stability in Air - Oven Method |
|
BSI BS EN ISO 4597-1 |
Plastics - Hardeners and Accelerators for Epoxide Resins Part 1: Designation |
|
BSI BS EN ISO 4612 |
Plastics - Preparation of PVC Pastes for Test Purposes - Planetary-Mixer Method |
|
BSI BS EN ISO 4615 |
Plastics - Unsaturated Polyesters and Epoxide Resins - Determination of Total Chlorine Content |
|
BSI BS EN ISO 4895 |
Plastics - Liquid Epoxy Resins - Determination of Tendency to Crystallize-AMD 10690: 4/2000; Renumbers BS ISO 4895: 1997 |
|
BSI BS EN ISO 6383-1 |
Plastics Film and sheeting Determination of tear resistance Part 1: Trouser tear method-AMD 15284: September 13, 2004; Renumbers BS 2782-3 Method 360B:1991 |
|
BSI BS EN ISO 7231 |
Polymeric Materials, Cellular Flexible - Method of Assessment of Air Flow Value at Constant Pressure-Drop |
|
BSI BS EN ISO 7792-1 |
Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 1: Designation system and basis for specifications-AMD 15254:September 3, 2004; Renumbers BS ISO 7792-1:1997 |
|
BSI BS EN ISO 7822 |
Textile Glass Reinforced Plastics - Determination of Void Content - Loss on Ignition, Mechanical Disintegration and Statistical Counting Methods |
|
BSI BS EN ISO 8975 |
Plastics - Phenolic Resins - Determination of pH-Also Numbered as BS 2782:Part 4:Method 451K:1995; Replaces BS 2782:Part 4:Method 451K:1978 |
|
BSI BS EN ISO 8985 |
Plastics - Ethylene/Vinyl Acetate Copolymer (EVAC) Thermoplastics - Determination of Vinyl Acetate Content |
|
BSI BS EN ISO 8986-1 |
Plastics - Polybutene (PB) Moulding and Extrusion Materials Part 1: Designation System and Basis for Specifications-Amd 1; Amd 10639; November 1999; Renumbers BS ISO 8986-1:1993; |
|
BSI BS EN ISO 9702 |
Plastics - Amine Epoxide Hardeners - Determination of Primary, Secondary and Tertiary Amine Group Nitrogen Content-AMD 10346: April 1999; Renumbers BS ISO 9702:1996 |
|
BSI BS EN ISO 9771 |
Plastics - Phenolic Resins - Determination of the Pseudo-Asiabatic Temperature Rise of Liquid Resols When Cured under Acid Conditions-Also Known as BS 2782: Part 4: Method 451P: 1997; |
|
BSI BS ISO 10059-2 |
Dense, shaped refractory products Determination of cold compressive strength Part 2: Test with packing |
|
BSI BS ISO 10371 |
Fibre Reinforced Plastics - Braided Tapes for Composite Materials Reinforcement - Basis for a Specification (V) |
|
BSI BS ISO 10713 |
Jewellery - Gold Alloy Coatings |
|
BSI BS ISO 10840 |
Plastics - Guidance for the use of standard fire tests-Supersedes BS ISO TR 10840: 1996; |
|
BSI BS ISO 11235 |
Rubber Compounding Ingredients - Sulfenamide Accelerators - Test Methods |
|
BSI BS ISO 11344 |
Rubber, raw synthetic Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography |
|
BSI BS ISO 11438-4 |
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method Part 4: Determination of Tin Content (V) |
|
BSI BS ISO 11438-6 |
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method Part 6: Determination of Thallium Content (V) |
|
BSI BS ISO 11438-7 |
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method Part 7: Determination of Silver Content (V) |
|
BSI BS ISO 11438-8 |
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method Part 8: Determination of Indium Content (V) |
|
BSI BS ISO 11907-2 |
Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents Part 2: Static Method (V) |
|
BSI BS ISO 11907-3 |
Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 3: Dynamic Decomposition Method Using a Travelling Furnace |
|
BSI BS ISO 1268-2 |
Fibre-reinforced plastics Methods of producing test plates Part 2: Contact and spray-up moulding |
|
BSI BS ISO 1268-5 |
Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 5: Filament Winding-Supersedes BS ISO 9291:1996; |
|
BSI BS ISO 1268-9 |
Fibre-reinforced plastics Methods of producing test plates Part 9: Moulding of GMT/STC |
|
BSI BS ISO 12965 |
Butadiene Rubber - Determination of Microstructure by Infra-Red Spectrometry |
|
BSI BS ISO 13311 |
Iron Ores - Determination of Lead Content - Flame Atomic Absorption Spectrometric Method |
|
BSI BS ISO 1382 |
Rubber Vocabulary |
|
BSI BS ISO 13887 |
Cold-reduced steel sheet of higher yield strength with improved formability |
|
BSI BS ISO 1409 |
Plastics/rubber Polymer dispersions and rubber latices (natural and synthetic) Determination of surface tension by the ring method |
|
BSI BS ISO 1437 |
Rubber compounding ingredients Carbon black Determination of sieve residue |
|
BSI BS ISO 15024 |
Fibre-Reinforced Plastic Composites - Determination of Mode I Interlaminar Fracture Toughness, GIC, for Unidirectionally Reinforced Materials |
|
BSI BS ISO 15033 |
Plastics - Determination of Caprolactam and Its Cyclic and Liner Pligomers by HPLC |
|
BSI BS ISO 15100 |
Plastics - Reinforcement Fibres - Chopped Strands - Determination of Bulk Density |
|
BSI BS ISO 15324 |
Corrosion of Metals and Alloys - Evaluation of Stress Corrosion Cracking by the Drop Evaporation Test |
|
BSI BS ISO 15634 |
Iron ores Determination of chromium content Flame atomic absorption spectrometric method-Partially Supersedes BS 7020-16:1993 |
|
BSI BS ISO 15825 |
Rubber compounding ingredients Carbon black Determination of aggregate size distribution by disc centrifuge photosedimentometry |
|
BSI BS ISO 16014-3 |
Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 3: Low-temperature method |
|
BSI BS ISO 17282 |
Plastics Guide to the acquisition and presentation of design data |
|
BSI BS ISO 1795 |
Rubber, raw natural and raw synthetic Sampling and further preparative procedures |
|
BSI BS ISO 1887 |
Textile Glass - Determination of Combustible-Matter Content (V) |
|
BSI BS ISO 19960 |
Cast steels and alloys with special physical properties |
|
BSI BS ISO 20032 |
Method for evaluation of tensile properties of metallic superplastic materials |
|
BSI BS ISO 20752 |
Cork stoppers Determination of releasable 2, 4, 6-trichloroanisol (TCA) |
|
BSI BS ISO 22314 |
Plastics Glass-fibre-reinforced products Determination of fibre length |
|
BSI BS ISO 23079 |
Magnesium and magnesium alloys Returns Requirements, classification and acceptance |
|
BSI BS ISO 247 |
Rubber Determination of ash-Supersedes BS 7164-5:1991 |
|
BSI BS ISO 2921 |
Rubber, vulcanized Determination of low-temperature characteristics Temperatureretraction procedure (TR test)-Supersedes BS 903-A29:1997 |
|
BSI BS ISO 3085 |
Iron Ores - Experimental Methods for Checking the Precision of Sampling, Sample Preparation and Measurement |
|
BSI BS ISO 3688 |
Pulps - Preparation of Laboratory Sheets for the Measurement of Diffuse Blue Reflectance Factor (ISO Brightness)-Supersedes BS 4432 PART 4:1980 |
|
BSI BS ISO 4433-3 |
Thermoplastics Pipes - Resistance to Liquid Chemicals - Classification Part 3: Unplasticized Poly(Vinyl Chloride) (PVC-U), High-Impact Poly(Vinyl Chloride) (PVC-HI) and Chlorinated Poly(Vinyl Chloride) (PVC-C) Pipes-Also Numbered as BS 2782: Part 11: Method 1161C: 1998; |
|
BSI BS ISO 4689-3 |
Iron ores Determination of sulfur content Part 3: Combustion/infrared method |
|
BSI BS ISO 5416 |
Direct Reduced Iron - Determination of Metallic Iron Content - Bromide-Methanol Titrimetric Method |
|
BSI BS ISO 6101-5 |
Rubber Determination of metal content by atomic absorption spectrometry Part 5: Determination of iron content-:1991 |
|
BSI BS ISO 6472 |
Rubber compounding ingredients Abbreviations |
|
BSI BS ISO 706 |
Rubber latex Determination of coagulum content (sieve residue)-Supersedes BS 6057-3.8:1987 |
|
BSI BS ISO 7270-2 |
Rubber Analysis by pyrolytic gas-chromatographic methods Part 2: Determination of styrene/butadiene/isoprene ratio |
|
BSI BS ISO 7780 |
Rubber and Rubber Lattices - Determination of Manganese Content - Sodium Periodate Photometric Methods-Supersedes BS 7164: Part 26: Section 26.2: 1990; Also Known as BS 7164-26.2: 1998 |
|
BSI BS ISO 9028 |
Rubber Dissolution by acid digestion-Supersedes BS 7164-4:1990 |
|
BSI BS ISO 9727-1 |
Cylindrical cork stoppers Physical tests Part 1: Determination of dimensions |
|
BSI BS ISO 9924-2 |
Rubber and Rubber Products - Determination of the Composition of Vulcanizates and Uncured Compounds by Thermogravity - Part 2: Acrylonitrile-Butadiene and Halobutyl Rubbers |
|
BSI DD CEN/TS 1071-7 |
Advanced technical ceramics Methods of test for ceramic coatings Part7: Determination of hardness and Young's modulus by instrumented indentation testing |
|
BSI DD CEN/TS 14441 |
Postal services Mail aggregates Creation, processing and tracking |
|
BSI DD CEN/TS 15025 |
Copper and copper alloys Determination of magnesium content Flame atomic absorption spectrometry method (FAAS) |
|
BSI DD CEN/TS 15083-1 |
Durability of wood and wood-based products Determination of the natural durability of solid wood against wood-destroying fungi, test methods Part 1: Basidiomycetes |
|
BSI DD ENV 1071-5 |
Advanced Technical Ceramics - Methods of Test for Ceramic Coatings Part 5: Determination of Porosity (V) |
|
BSI DD ENV 12788 |
Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at High Temperature under Inert Atmosphere - Determination of Flexural Strength |
|
BSI DD ENV 13800 |
Lead and Lead Alloys - Analysis by Flame Atomic Absorption Spectrometry (FAAS) or Inductively Coupled Plasma Emission Spectrometry (ICP-ES), without Separation of the Lead Matrix |
|
BSI DD ENV 14312 |
Advanced Technical Ceramics Ceramic Powders Determination of Flowability Behaviour of Ceramic Granules |
|
BSI DD ENV 725- 11 |
Advanced Technical Ceramics - Methods of Test for Ceramic Powders Part 11: Determination of the Densification on Natural Sintering (V) |
|
BSI BS 5293 PART 20 |
Sampling and Testing Carbon Black for Use in the Rubber Industry Part 20: Method for Evaluation in Styrene-Butadiene Rubbers (ISO 3257: 1992) |
|
BSI BS 5293 PART 5 |
Sampling and Testing Carbon Black for Use in the Rubber Industry Part 5: Method for Determination of Loss of Mass on Heating (ISO 1126: 1992) |
|
BSI BS 5909 |
Scale Adhesion Test for Oxygen-Free Copper |
|
BSI BS 6043 SEC 1.2 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.2: Determination of Water Content (Dean and Stark Method) |
|
BSI BS 6043 SEC 2.1 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 2: Electrode Coke Section 2.1: Sampling |
|
BSI BS 6043 SEC 2.12 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 2: Electrode Coke Section 2.12: Determination of Particle Size Distribution of Fine Coke (V) |
|
BSI BS 6043 SEC 2.7 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 2: Electrode Coke Section 2.7: Determination of the Apparent Oil Content of Calcined Cokes (Gravimetric Method) |
|
BSI BS 6043 SEC 4.12 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 4: Cold Ramming Pastes Section 4.12: Determination of the Thermal Conductivity of Baked Rammed Paste |
|
BSI BS 6043 SEC 4.6 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 4: Cold Ramming Pastes Section 4.6: Determination of Maximum Rammed Apparent Density of Unbaked Paste |
|
BSI BS 6043-1.11 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture Part 1: Electrode pitch Section 1.11: Determination of the atomic C/H ratio of the quinoline-insoluble material-ISO 12979: 1999 |
|
BSI BS 6043-1.6 |
Methods of Sampling and Test for Carbonaceous Materials Used in Alumnium Manufacture - Part 1: Electrode Pitch - Section 1.6: Determination of Coking Value-CORR 10644 April 2000; ISO 6998: 1997; |
|
BSI BS 6043-2.18 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture Part 2: Electrode coke Section 2.18: Determination of total sulfur by the Eschka method-ISO 5931: 2000 |
|
BSI BS 6043-3.3 |
Methods of sampling and test for raw materials used in aluminium manufacture - Part 3: Electrodes - Section 3.3: Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method-ISO 12985-1: 2000 |
|
BSI BS 6043-4.1 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture Part 4: Cold ramming pastes - Section 4.1: Methods of sampling-ISO 14422: 1999 |
|
BSI BS 6043-4.2 |
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture - Part 4: Cold Ramming Pastes - Section 4.2: Determination of the Effective Binder Content and Aggregate Content by Extraction with Quinoline; Determination of Aggregate Size Distribution-ISO/TS 14423: 1999; |
|
BSI BS 6057 SEC 1.2 |
Rubber Latices Part 1: Specifications and Coding Section 1.2: Specification for Evaporated, Preserved Natural Rubber Latices |
|
BSI BS 6057 SEC 3.12 |
Rubber Latices Part 3: Methods of Test Section 3.12: Determination of Boric Acid Content of Natural Rubber Latex Concentrate (ISO 1802: 1992) |
|
BSI BS 6057 SEC 3.17 |
Rubber Latices Part 3: Methods of Test Section 3.17: Determination of Bound Styrene Content of Non-Reinforced Styrene Content of Non-Reinforced Styrene Butadiene Rubber Latices |
|
BSI BS 6057 SEC 3.23 |
Rubber Latices Part 3: Methods of Test Section 3.23: Microbiological Examination of Synthetic Rubber Latex |
|
BSI BS 6057 SEC 3.6 |
Rubber Latices Part 3: Methods of Test Section 3.6: Determination of Volatile Fatty Acid Number of Natural Rubber Latices (ISO 506: 1992) |
|
BSI BS 6057-3.9 |
Rubber Latices - Part 3: Methods of Test - Section 3.9 Determination of pH-AMD 16247: April 28, 2006; ISO 976:1996 |
|
BSI BS 6128 PART 6 |
Industrial Laminated Rods and Tubes Based on Thermosetting Resins Part 6: Hexagonal Moulded Rods |
|
BSI BS 6200 PART 5 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 5: Guidelines on Statistical Procedures-Supersedes BS 4237: 1967; |