|
BSI BS 6200 SUB SEC 3.11.3 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.11: Determination of Cobalt Subsection 3.11.3: Flame Atomic Absorption Spectrometric Method-ISO 11652: 1997; |
|
BSI BS 6200 SUB SEC 3.12.1 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.12: Determination of Copper Subsection 3.12.1: Steel and Cast Iron: Volumetric Method-Replaces Method 1 for the Determination of Copper in Handbook 19: 1970 |
|
BSI BS 6200 SUB SEC 3.16.2 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.16: Determination of Lead Subsection 3.16.2: Steel: Spectrophotometric Method-Replaces Method 2 for the Determinaion of Lead in Handbook 19: 1970; |
|
BSI BS 6200 SUB SEC 3.16.4 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Sec 3.16: Determination of Lead Subsec 3.16.4: Steel: Flame Atomic Absorption Spectrometric Method (AMD 7072) February 28, 1992 (V)-Amd 1; |
|
BSI BS 6200 SUB SEC 3.26.1 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals: Part 3: Methods of Analysis Section 3.26 Determination of Silicon Subsection 3.26.1: Steel and Iron: Gravimetric Method (ISO 439 1994) (V) |
|
BSI BS 6200 SUB SEC 3.31.1 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.31: Determination of Tin Subsection 3.31.1: Steel and Cast Iron: Volumetric Method |
|
BSI BS 6200 SUB SEC 3.33.1 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.33: Determination of Tungsten Subsection 3.33.1: Steel: Gravimetric Method |
|
BSI BS 6200 SUB SEC 3.33.3 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.33: Determination of Tungsten Subsection 3.33.3: Ferrotungsten: Gravimetric Method |
|
BSI BS 6200 SUB SEC 3.34.1 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Sec 3.34: Determination of Vanadium Subsec 3.34.1: Steel and Cast Iron: Potentiometric Titration Method (ISO 4947: 1986) (AMD 7081) February 28, 1992 (V)-Amd 1; |
|
BSI BS 6200 SUB SEC 3.34.2 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.34: Determination of Vanadium Subsection 3.34.2: Steel and Cast Iron: Spectro- photometric Method (ISO 4942: 1988) |
|
BSI BS 6200 SUB SEC 3.34.3 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.34: Determination of Vanadium Subsection 3. 34.3: Steel and Cast . Iron: Flame Atomic Absorption Spectrometric Method |
|
BSI BS 6200 SUB SEC 3.37.1 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.37: Determination of Zirconium Subsection 3.37.1: Steel Gravimetric Method-Replaces Method 1 for the Determination of Zirconium in Handbook No. 19: 1970; |
|
BSI BS 6200 SUBSEC 3.1.1 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.1: Determination of Aluminium Subsection 3.1.1: Steel, Cast Iron, Low Carbon Ferro-Chromium Metal: Volumetric Method |
|
BSI BS 6200 SUBSEC 3.1.6 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.1: Determination of Aluminium Subsection 3.1.6: Permanent Magnet Alloys: Volumetric Method |
|
BSI BS 6200 SUBSEC 3.40.4 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.40: Multi-Element Methods Subsection 3.40.4: Determination of Nickel, Copper and Cobalt Contents by Inductively Coupled Plasma Atomic Emission Spectrometric Method - Determination of Cobalt Content-ISO 13898-4: 1997; |
|
BSI BS 6200SUB SEC 3.5.2 |
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.5: Determination of Boron Subsection 3.5.2: Ferroboron: Volumetric Method-Replaces Method 2 for the Determination of Boron in Handbook 19: 1970 |
|
BSI BS 6721 PART 5 |
Sampling and Analysis of Copper and Copper Alloys Part 5: Method for Determination of Zinc in Copper and Copper Alloys by Flame Atomic Absorption Spectrophotometry |
|
BSI BS 6721 PART 9 |
Sampling and Analysis of Copper and Copper Alloys Part 9: Method for Determination of Lead in Copper Alloys by Flame Atomic Absorption Spectrophotometry (ISO 4749: 1984) (V) |
|
BSI BS 6783 PART 10 |
Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 10: Method for Determination of Iron in Nickel Alloys (Titrimetric Method Using Potassium Dichromate) |
|
BSI BS 6783 PART 15 |
Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 15: Method for the Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometry (ISO 11433: 1993) (V) |
|
BSI BS 6783 PART 2 |
Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 2: Method for Determination of Nickel in Ferronickel (Dimethylglyoxime Gravimetric Method) (ISO 6352: 1985) (AMD 6991) February 28, 1992 (V)-Amd 1; |
|
BSI BS 6783 PART 4 |
Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys: Part 4: Method for Determination of Silver, Arsenic, Bismuth, Cadmium, Lead, Antimony, Selenium, Tin, Tellurium and Thallium in Nickel by Electro- thermal Atomic Absorption Spectrometry |
|
BSI BS 6783 PART 6 |
Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 6: Method for Determining of Sulphur in Nickel by Methylene Blue Molecular Absorption Spectrometry After Generation of Hydrogen Sulphide |
|
BSI BS 6890 |
Method for Determination of Grease Resistance of Paper and Board-AMD 7214: September 15, 1992; ISO 5634: 1986; |
|
BSI BS 6995 |
Method for Evaluation of Vulcanization Characteristics of Styrene-Butadiene Rubber (SBR, YSBR) (Emulsion and Solution- Polymerized Types)-ISO 2322: 1996; |
|
BSI BS 7034 PART 2 |
Viscosity and Viscometric Fixed Points of Glass Part 2: Method for the Determination of Viscosity by Rotation Viscometers |
|
BSI BS 7067 |
Guide to Determination and Presentation of Float and Sink Characteristics of Raw Coal and of Products from Coal Preparation Plants |
|
BSI BS 7164 PT 26: SEC 26.1 |
Chemical Tests for Raw and Vulcanized Rubber Part 26: Methods for Determination of Manganese Content Section 26.1: Atomic Absorption Spectrometry-ISO 6101-4: 1997; |
|
BSI BS 7164 PT 31: SEC 31.1 |
Chemical Tests for Raw and Vulcanized Rubber Part 31: Determination of Anti-Degradants Section 31.1: High-Performance Liquid Chromatography-ISO 11089: 1997; |
|
BSI BS 7164 SEC 2.2 |
Chemical Tests for Raw and Vulcanized Rubber Part 2: Sample Preparation Section 2.2: Vulcanized Rubber |
|
BSI BS 7164 SEC 22.2 |
Chemical Tests for Raw and Vulcanized Rubber Part 22: Methods for Determination of Bromine and Chlorine Content Section 22.2: Oxygen Flask Combustion Technique for Determination of Bromine and Chlorine (ISO 7725: 1991) (V) |
|
BSI BS 7164 SEC 27.2 |
Chemical Tests for Raw and Vulcanized Rubber Part 27: Methods for Determination of Iron Content Section 27.2: Photometric Method (ISO 1657: 1986) |
|
BSI BS 7455 PART 5 |
Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 5: Method for the Determination of Iron (ISO 7530-5: 1990) |
|
BSI BS 7455 PART 9 |
Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 9: Method for Determination of Vanadium (ISO 7530-9: 1993) (V) |
|
BSI BS 7476 |
Specification for Polyethylene Film for Covering Silage |
|
BSI BS 7658 PART 2 |
Carbon Fibre Part 2: Method for Determination of Linear Density-ISO 10120: 1991; |
|
BSI BS 7709 PART 3 |
Analysis of Extract Solutions of Glass Part 3: Method for Determination of Calcium Oxide and Magnesium Oxide by Flame Atomic Absorption Spectrometry (ISO 10136-3: 1993) (V) |
|
BSI BS 7825 SEC 3.10 |
Calibration of Rubber and Plastics Test Equipment Part 3: Calibration Schedules Section 3.10: Conditioning, Sample and Test Piece Preparation |
|
BSI BS 7825 SEC 3.4 |
Calibration of Rubber and Plastics Test Equipment Part 3: Calibration Schedules Section 3.4: Mechanical Properties of Rubber |
|
BSI BS 7825 SEC 3.5 |
Calibration of Rubber and Plastics Test Equipment Part 3: Calibration Schedules Section 3.5: Optical and Weathering Properties |
|
BSI BS 7825 SEC 3.6 |
Calibration of Rubber and Plastics Test Equipment Part 3: Calibration Schedules Section 3.6: Dimensional Properties |
|
BSI BS 7825 SEC 3.7 |
Calibration of Rubber and Plastics Test Equipment Part 3: Calibration Schedules Section 3.7: Rheological Properties |
|
BSI BS 7825 SEC 3.9 |
Calibration of Rubber and Plastics Test Equipment Part 3: Calibration Schedules Section 3.9 Flammability Characteristics |
|
BSI BS EN 1007-1 |
Advanced technical ceramics Ceramic composites Methods of test for reinforcement Part 1: Determination of size content-Supersedes DD ENV 1007-1: 1994; |
|
BSI BS EN 1007-2 |
Advanced technical ceramics Ceramic composites Methods of test for reinforcement Part 2: Determination of linear density-Supersedes DD ENV 1007-2: 1994; |
|
BSI BS EN 1007-4 |
Advanced technical ceramics Ceramic composites Methods of test for reinforcement Part 4: Determination of tensile properties of filaments at ambient temperature-Supersedes DD ENV 1007-4: 1994 |
|
BSI BS EN 1071-2 |
Advanced technical ceramics Methods of test for ceramic coatings Part 2: Determination of coating thickness by the crater grinding method-AMD 15227:June 24, 2004; Supersedes DD ENV 1071-2:1994 |
|
BSI BS EN 1071-4 |
Advanced technical ceramics Methods of test for ceramic coatings Part 4: Determination of chemical composition by electron probe microanalysis (EPMA)-: 1996 |
|
BSI BS EN 1159-1 |
Advanced technical ceramics Ceramic composites Thermophysical properties Part 1: Determination of thermal expansion |
|
BSI BS EN 12012-2 |
Rubber and Plastics Machines - Size Reduction Machines - Part 2: Safety Requirements for Strand Pelletisers-AMD 15013: March 4, 2004 |
|
BSI BS EN 12012-3 |
Rubber and Plastics Machines - Size Reduction Machines - Part 3: Safety Requirements for Shredders |
|
BSI BS EN 12107 |
Plastics Piping Systems - Injection-Moulded Thermoplastics Fittings, Valves and Ancillary Equipment - Determination of the Long-Term Hydrostatic Strength of Thermoplastics Materials for Injection Moulding of Piping Components-Also Numbered as BS 2782: Part 11: Method 1121F: 1998; |
|
BSI BS EN 1225 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Creep Factor under Wet Conditions and Calculation of the Long-Term Specific Ring Stiffness-Also Known as BS 2782-12:METH 1214C:1996 |
|
BSI BS EN 12291 |
Advanced technical ceramics Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure Determination of compression properties |
|
BSI BS EN 12369-1 |
Wood-Based Panels - Characteristic Values for Structural Design - Part 1: OSB, Particleboards and Fibreboards |
|
BSI BS EN 12441-3 |
Zinc and Zinc Alloys - Chemical Analysis - Part 3: Determination of Lead, Cadmium and Copper - Flame Atomic Absorption Spectrometric Method-Supersedes BS 3630-7:1967, BS 3630-8:1971, BS 3630-9:1969, BS 3630-13:1972 and BS 3630-14:1972; |
|
BSI BS EN 12441-5 |
Zinc and zinc alloys Chemical analysis Part 5: Determination of iron in primary zinc Spectrophotometric method-Supersedes BS 3630-5:1963; |
|
BSI BS EN 12441-7 |
Zinc and zinc alloys Chemical analysis Part 7: Determination of tin Flame atomic absorption spectrometric method after extraction |
|
BSI BS EN 12441-9 |
Zinc and zinc alloys Chemical analysis Part 9: Determination of nickel in zinc alloys Flame atomic absorption spectrometric method |
|
BSI BS EN 12465 |
Wood Poles Overhead Lines - Durability Requirements |
|
BSI BS EN 12482-1 |
Aluminium and Aluminium Alloys - Reroll Stock for General Applications - Part 1: Specifications for Hot Rolled Reroll Stock |
|
BSI BS EN 12482-2 |
Aluminium and Aluminium Alloys - Reroll Stock for General Applications - Part 2: Specifications for Cold Rolled Reroll Stock |
|
BSI BS EN 12490 |
Durability of Wood and Wood-Based Products - Preservative-Treated Solid Wood - Determination of the Penetration and Retention of Creosote in Treated Wood |
|
BSI BS EN 12511 |
Wood Poles for Overhead Lines - Determination of Characteristic Values |
|
BSI BS EN 12781 |
WallCoverings - Specification for Cork Panels |
|
BSI BS EN 12861 |
Copper and Copper Alloys - Scrap |
|
BSI BS EN 12877-2 |
Colouring Materials in Plastics - Determination of Colour Stability to Heat During Processing of Colouring Materials in Plastics - Part 2: Determination by Injection Moulding |
|
BSI BS EN 12893 |
Copper and Copper Alloys - Determination of Spiral Elongation Numbers-Supersedes DD 79:1981; |
|
BSI BS EN 12905 |
Products Used for Treatment of Water Intended for Human Consumption - Expanded Aluminosilicate |
|
BSI BS EN 12923-1 |
Advanced technical ceramics Monolithic ceramics Part 1: General practice for undertaking corrosion tests |
|
BSI BS EN 13003-1 |
Para-Aramid Fibre Filament Yarns - Part 1: Designation |
|
BSI BS EN 13003-2 |
Para-Aramid Fibre Filament Yarns - Part 2: Methods of Test and General Specifications |
|
BSI BS EN 13085 |
Wallcoverings Specification for cork rolls-CORR 13139: April, 2001 |
|
BSI BS EN 1312 |
Round and Sawn Timber - Determination of the Batch Volume of Sawn Timber |
|
BSI BS EN 1313-1 |
Round and Sawn Timber - Permitted Deviations and Preferred Sizes Part 1: Softwood Sawn Timber-AMD 11020: September 2000; |
|
BSI BS EN 13234 |
Advanced technical ceramics Mechanical properties of ceramic composites at ambient temperature Evaluation of the resistance to crack propagation by notch sensitivity testing-Supersedes DD ENV 13234:2000 |
|
BSI BS EN 13488 |
Wood flooring Mosaic parquet elements |
|
BSI BS EN 13604 |
Copper and Copper Alloys - Products of High Conductivity Copper for Electronic Tubes, Semiconductor Devices and Vacuum Applications |
|
BSI BS EN 13647 |
Wood and parquet flooring and wood panelling and cladding Determination of geometrical characteristics |
|
BSI BS EN 13810-1 |
Wood-based panels Floating floors Part 1: Performance specifications and requirements |
|
BSI BS EN 1389 |
Advanced technical ceramics Ceramic composites Physical properties Determination of density and apparent porosity |
|
BSI BS EN 13920-13 |
Aluminium and aluminium alloys Scrap Part 13: Mixed turnings consisting of two or more alloys |
|
BSI BS EN 13920-4 |
Aluminium and aluminium alloys Scrap Part 4: Scrap consisting of one single wrought alloy |
|
BSI BS EN 13990 |
Wood flooring Solid softwood floor boards |
|
BSI BS EN 1402-6 |
Unshaped refractory products Part 6: Measurement of physical properties-CORR 17175: June 29, 2007 |
|
BSI BS EN 14081-4 |
Timber structures Strength graded structural timber with rectangular cross section - Part 4: Machine grading Grading machine settings for machine controlled systems |
|
BSI BS EN 14121 |
Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications |
|
BSI BS EN 14242 |
Aluminium and aluminium alloys Chemical analysis Inductively coupled plasma optical emission spectral analysis |
|
BSI BS EN 14342 |
Wood flooring Characteristics, evaluation of conformity and marking |
|
BSI BS EN 14374 |
Timber structures Structural laminated veneer lumber Requirements |
|
BSI BS EN 14469-1 |
Pigments and extenders Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) Part 1: Composition and preparation of basic mixtures |
|
BSI BS EN 1450 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Components - Test Methods to Prove the Design of Bolted Flange Joints-AMD 10993: September 2000; Also Known as BS 2782: Part 12: Method 1224 F: 1997; |
|
BSI BS EN 14915 |
Solid wood panelling and cladding Characteristics, evaluation of conformity and marking |
|
BSI BS EN 14951 |
Solid hardwood panelling and cladding Machined profiles elements |
|
BSI BS EN 15024-2 |
Copper and copper alloys Determination of zinc content Part 2: Flame atomic absorption spectrometry method (FAAS) |
|
BSI BS EN 15063-1 |
Copper and copper alloys Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) Part 1: Guidelines to the routine method |
|
BSI BS EN 15079 |
Copper and copper alloys Analysis by spark source optical emission spectrometry (S-OES) |
|
BSI BS EN 1716 |
Plastics Piping Systems - Polyethylene (PE) Tapping Tees - Test Method for Impact Resistance of an Assembled Tapping Tee-Also Known as BS 2782: Part 11: Method 1108T: 1997; |
|
BSI BS EN 1892 |
Advanced technical ceramics Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties-Supersedes DD ENV 1892:1996 |
|
BSI BS EN 2259 |
Silicone Rubber (VMQ) Hardness 50 IRHD (V) |
|
BSI BS EN 23326 |
Hardmetals - Determination of (the Magnetization) Coercivity (ISO 3326: 1975) (V) |
|
BSI BS EN 23369 |
Impermeable Sintered Metal Materials and Hardmetals - Determination of Density (ISO 3369: 1975) (V) |
|
BSI BS EN 23908 |
Hardmetals - Determination of Insoluble (Free) Carbon Content - Gravimetric Method-ISO 3908: 1985;Supersedes BS 5600: Part 4: Section 4.2: 1987 |
|
BSI BS EN 23909 |
Hardmetals - Determination of Cobalt - Potentiometric Method (ISO 3909: 1976) (BS 5600: Section 4.3 1979) (V) |
|
BSI BS EN 23923-2 |
Metallic Powders - Determination of Apparent Density Part 2: Scott Volumeter Method (ISO 3923-2: 1981) (V) |
|
BSI BS EN 24491-1 |
Metallic Powders - Determination of Oxygen Content by Reduction Methods Part 1: General Guidelines (ISO 4491-1: 1989) (V) |
|
BSI BS EN 24498-1 |
Sintered Metal Materials, Excluding Hardmetals - Determination of Apparent Hardness Part 1: Materials of Essentially Uniform Section Hardness (ISO 4498-1: 1990) (V) |
|
BSI BS EN 24499 |
Hardmetals - Metallographic Determination of Microstructure (ISO 4499: 1978) (V) |
|
BSI BS EN 24501 |
Hardmetals - Determination of Titanium - Photometric Peroxide Method (ISO 4501: 1978) (V) |
|
BSI BS EN 24506 |
Specification for Hardmetals - Compression Test-:1981; ISO 4506:1979 |
|
BSI BS EN 25754 |
Sintered Metal Materials, Excluding Hardmetals - Unnotched Impact Test Piece (ISO 5754: 1978) (V) |
|
BSI BS EN 27627-1 |
Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry Part 1: General Requirements (ISO 7627-1: 1983) (V) |
|
BSI BS EN 27627-2 |
Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry Part 2: Determination of Calcium, Potassium, Magnesium and Sodium, in Contents from 0.001 to 0.02 % (m/m) (ISO 7627-2: 1983) (V) |
|
BSI BS EN 27627-5 |
Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry Part 5: Determination of Cobalt, Iron, Manganese, Molybdenum, Nickel, Titanium and Vanadium in Contents from 0.5 to 2 % (m/m) (ISO 7627-5: 1985) (V) |
|
BSI BS EN 27627-6 |
Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry Part 6: Determination of Chromium in Contents from 0.01 to 2 % (m/m) (ISO 7627-6: 1985)(V) |
|
BSI BS EN 28050 |
Ferronickel Ingots or Pieces - Sampling for Analysis (ISO 8050: 1988) |
|
BSI BS EN 28233 |
Thermoplastics Valves - Torque - Test Method (ISO 8233: 1988) |
|
BSI BS EN 61061-3-1 |
Non-Impregnated Densified Laminated Wood for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 1: Sheets Produced from Beech Veneer-IEC 61061-3-1: 1998; |
|
BSI BS EN 61068-2 |
Polyester Fibre Woven Tapes Part 2: Methods of Test-Supersedes BS 7809: Part 2: 1995; IEC 61068-2: 1991; |
|
BSI BS EN 611-2 |
Tin and Tin Alloys - Pewter and Pewterware Part 2: Pewterware-BS EN 611: Part 2: 1997, Together with BS EN 611: Part 1: 1996, Supersedes BS 5140: 1974; |
|
BSI BS EN 725-5 |
Advanced Technical Ceramics - Methods of Test for Ceramic Powders Part 5: Determination of the Particle Size Distribution (V) |
|
BSI BS EN 725-8 |
Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 8: Determination of Tapped Bulk Density |
|
BSI BS EN 725-9 |
Advanced technical ceramics Methods of test for ceramic powders Part 9: Determination of un-tapped bulk density |
|
BSI BS EN 728 |
Plastics Piping and Ducting Systems - Polyolefin Pipes and Fittings - Determination of Oxidation Induction Time-Also Known as BS 2782: Part 11: Method 1103D: 1997 |
|
BSI BS EN 802 |
Plastics Piping and Ducting Systems - Injection-Moulded Thermoplastics Fittings for Pressure Piping Systems - Test Methods for Maximum Deformation by Crushing (V) |
|
BSI BS EN 804 |
Plastics Piping Systems - Injection-Moulded Socket Fittings for Solvent-Cemented Joints for Pressure Piping - Test Method for Resistance to a Short-Term Internal Hydrostatic Pressure (V) |
|
BSI BS EN 955-2 |
Chemical Analysis of Refractory Products Part 2: Products Containing Silica and/or Alumina (Wet Method)-Supersedes BS 1902: Section 2.1 : 1988; Also Known as BS 1902: Section 2.1 : 1995 |
|
BSI BS EN 993-20 |
Methods of test for dense shaped refractory products Part 20: Determination of resistance to abrasion at ambient temperature |
|
BSI BS EN ISO 10081-3 |
Classification of dense shaped refractory products Part 3: Basic products containing from 7 % to 50 % residual carbon-AMD 15909: March 2006; Renumbers BS ISO 10081-3:2003 |
|
BSI BS EN ISO 10350-2 |
Plastics - Acquisition and Presentation of Comparable Single-Point Data - Part 2: Long-Fibre-Reinforced Plastic |
|
BSI BS EN ISO 10363 |
Hot-Melt Adhesives - Determination of Thermal Stability (V) |
|
BSI BS EN ISO 10366-1 |
Plastics Methyl methacrylate-acrylonitrile- butadiene-styrene (MABS) moulding and extrusion materials Part 1: Designation system and basis for specifications-CORR 14255: December 5, 2002; |
|
BSI BS EN ISO 1061 |
Plastics - Unplasticized Cellulose Acetate - Determination of Free Acidity-CORR 10819: March 2001; Supersedes BS 2782-4 Method 459A:1991: |
|
BSI BS EN ISO 1110 |
Plastics - Polyamides - Accelerated Conditioning of Test Specimens-AMD 10263: October 1998; Renumbers BS ISO 1110: 1995 |
|
BSI BS EN ISO 11358 |
Plastics - Thermogravimetry (TG) of Polymers - General Principles-Also Numbered as BS 2782: Part 1: Method 127A: 1997; |
|
BSI BS EN ISO 11468 |
Plastics - Preparation of PVC Pastes for Test Purposes - Dissolver Method-AMD 10717: December 2000; Renumbers BS ISO 11468: 1997 |
|
BSI BS EN ISO 11542-1 |
Plastics - Ultra-High-Molecular-Weight Polyethylene (PE-UHMW) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-CORR 13644: January 24, 2002; Supersedes BS ISO 11542-1: 1994; |
|
BSI BS EN ISO 11758 |
Rubber and Plastics Hoses - Exposure to a Xenon Arc Lamp - Determination of Changes in Colour and Appearance-AMD 10338; July 1999; Renumbers BS ISO 11758: 1995; |
|
BSI BS EN ISO 13468-1 |
Plastics - Determination of the Total Luminous Transmittance of Transparent Materials Part 1: Single-Beam Instrument-Also Numbered as BS 2782: Part 5: Method 532A: 1997; |
|
BSI BS EN ISO 13783 |
Plastics Piping Systems - Unplasticized Poly(Vinyl Chloride) (PVC-U) End-Load-Bearing Double-Socket Joints - Test Method for Leaktightness and Strength While Subjected to Bending and Internal Pressure-Also Numbered as BS 2782: Part 11: Method 1123C: 1998; |
|
BSI BS EN ISO 13845 |
Plastics Piping Systems - Elastomeric-Sealing-Ring-Type Socket Joints for Use with Unplasticized Poly (Vinyl Chloride)(PVC-U) Pipes - Test Method for Leaktightness under Internal Pressure and with Angular Deflection-Also Known as BS 2782-11: Method 1123E:2000; |
|
BSI BS EN ISO 14530-1 |
Plastics - Unsaturated-Polyester Powder Moulding Compounds (Up-PMCs) - Part 1: Designation System and Basis for Specifications |
|
BSI BS EN ISO 14530-2 |
Plastics - Unsaturated-Polyester Powder Moulding Compounds (Up-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties |
|
BSI BS EN ISO 14577-1 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method-CORR 14429: April 2, 2003; |
|
BSI BS EN ISO 14577-4 |
Metallic materials Instrumented indentation test for hardness and materials parameters Part 4: Test method for metallic and non-metallic coatings |
|
BSI BS EN ISO 14632 |
Extruded Sheets of Polyethylene (PE-HD) - Requirements and Test Methods |
|
BSI BS EN ISO 14663-2 |
Plastics Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties-AMD 16029: June 2006;: 2002 |
|
BSI BS EN ISO 14910-1 |
Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part1: Designation system and basis for specifications-AMD 16025: August 2006;:1998 |
|
BSI BS EN ISO 15023-1 |
Plastics Poly(vinyl alcohol) (PVAL) materials Part 1: Designation system and basis for specifications-AMD 16030: June 2006;:2002 |
|
BSI BS EN ISO 15252-1 |
Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 1: Designation System and Basis for Specifications |
|
BSI BS EN ISO 15349-2 |
Unalloyed steel Determination of low carbon content Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) |
|
BSI BS EN ISO 15732 |
Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method |
|
BSI BS EN ISO 1599 |
Plastics - Cellulose Acetate - Determination of Viscosity Loss on Moulding |
|
BSI BS EN ISO 1622-2 |
Plastics - Polystyrene (PS) Moulding and Extrusion Materials Part 2: Preparation of Test Specimens and Determination of Properties-Amd 1; Amd 10649; November 1999; Renumbers BS ISO 1622-2:1995; |
|
BSI BS EN ISO 172 |
Plastics - Phenol-Formaldehyde Mouldings - Detection of Free Ammonia-AMD 10253: 10/1998; Renumbers BS 2782: Part 4: Method 451L: 1980; ISO 172: 1978 |
|
BSI BS EN ISO 177 |
Plastics - Determination of Migration of Plasticizers-AMD 10677: 1/2000; Renumbers BS 2782-4: Method 465C: 1990 |
|
BSI BS EN ISO 20482 |
Metallic materials Sheet and strip Erichsen cupping test-CORR 14796: October 7, 2003; Supersedes BS 3855: 1965; |
|
BSI BS EN ISO 21627-1 |
Plastics Epoxy resins Determination of chlorine content Part 1: Inorganic chlorine |
|
BSI BS EN ISO 3385 |
Flexible Cellular Ploymeric Materials - Determination of Fatique by Constant-Load Pounding (AMD 8970) December 15, 1995 (V)-Amd 1; |
|
BSI BS EN ISO 3673-1 |
Plastics - Epoxy Resins Part 1: Designation-AMD 10743: February 2000; Renumbers BS ISO 3673-1: 1996 |
|
BSI BS EN ISO 3953 |
Metallic Powders - Determination of Tap Density (V) |
|
BSI BS EN ISO 5659-1 |
Plastics - Smoke Generation - Part 1: Guidance on Optical-Density Testing-AMD 10628; November 1999; Renumbers BS ISO 5659-1:1996; |
|
BSI BS EN ISO 6402-2 |
Plastics Acrylonitrile-styreneacrylate (ASA), acrylonitrile-(ethylenepropylene- diene)- styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties-CORR 15076: March 30, 2004 |
|
BSI BS EN ISO 8619 |
Plastics - Phenolic Resin Powder - Determination of Flow Distance on a Heated Glass Plate |
|
BSI BS EN ISO 8795 |
Plastics piping systems for the transport of water intended for human consumption Migration assessment Determination of migration values of plastics pipes and fittings and their joints |
|
BSI BS EN ISO 8986-2 |
Plastics - Polybutene (PB) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties-AMD 12041: May 2001; |
|
BSI BS EN ISO 9054 |
Cellular Plastics, Rigid - Test Methods for Self-Skinned High-Density Materials |
|
BSI BS EN ISO 9944 |
Plastics - Phenolic Resins - Determination of Electrical Conductivity of Resin Extracts-Also Known as BS 2782: Part 4: Method 451Q: 1995 |
|
BSI BS ISO 10836 |
Iron Ores - Method of Sampling and Sample Preparation for Physical Testing (V) |
|
BSI BS ISO 11438-2 |
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method Part 2: Determination of Lead Content (V) |
|
BSI BS ISO 11438-3 |
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method Part 3: Determination of Antimony Content (V) |
|
BSI BS ISO 11567 |
Carbon Fibre - Determination of Filament Diameter and Cross-Sectional Area (V) |
|
BSI BS ISO 11833-1 |
Plastics - Unplasticized Poly(Vinyl Chloride) Sheets - Types, Dimensions and Characteristics - Part 1: Sheets of Thickness Not Less Than 1 mm |
|
BSI BS ISO 126 |
Natural rubber latex concentrate Determination of dry rubber content |
|
BSI BS ISO 1268-1 |
Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 1: General Conditions |
|
BSI BS ISO 1268-10 |
Fibre-reinforced plastics Methods of producing test plates Part 10: Injection moulding of BMC and other long-fibre moulding compounds General principles and moulding of multipurpose test specimens |
|
BSI BS ISO 1268-6 |
Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 6: Pultrusion Moulding |
|
BSI BS ISO 1268-8 |
Fibre-reinforced plastics Methods of producing test plates Part 8: Compression moulding of SMC and BMC |
|
BSI BS ISO 12992 |
Plastics - Vertical Flame Spread Determination for Film and Sheet (V) |
|
BSI BS ISO 13583-2 |
Centrifugally cast steel and alloy products Part 2: Heat resistant materials |
|
BSI BS ISO 13741-1 |
Plastics/Rubber - Polymer Dispersions and Rubber Latices (Natural and Synthetic) - Determination of Residual Monomers and Other Organic Components by Capillary- Column Gas Chromatography - Part 1: Direct Liquid Injection Method |
|
BSI BS ISO 13756 |
Determination of Silver in Silver Jewellery Alloys - Volumetric (Potentiometric) Method Using Sodium Chloride or Potassium Chloride |
|
BSI BS ISO 13947 |
Metallic powders Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen |
|
BSI BS ISO 14849 |
Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Ammonia and Ammonium Compounds - Indophenol Method |
|
BSI BS ISO 14855 |
Determination of the Ultimate Aerobic Biodegradability and Disintegration of Plastic Materials under Controlled Composting Conditions - Method by Analysis of Evolved Carbon Dioxide-Renumbered as BS EN ISO 14855:2004 |
|
BSI BS ISO 14897 |
Plastics Polyols for Use in the Production of Polyurethane Determination of Water Content |
|
BSI BS ISO 15040 |
Composites - Prepregs - Determination of Gel Time |
|
BSI BS ISO 15329 |
Corrosion of metals and alloys Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys |
|
BSI BS ISO 15373 |
Plastics - Polymer Dispersions - Determination of Free Formaldehyde |
|
BSI BS ISO 17081 |
Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique-CORR 15698: October 28, 2005 |
|
BSI BS ISO 18898 |
Rubber Calibration and verification of hardness testers |
|
BSI BS ISO 19819 |
Metallic materials Tensile testing in liquid helium |
|
BSI BS ISO 21416 |
Rubber Determination of the aromaticity of oil in vulcanized rubber compounds |
|
BSI BS ISO 21949 |
Coated abrasives Plain sheets with holes for dust extraction |
|
BSI BS ISO 24337 |
Laminate floor coverings Determination of geometrical characteristics |
|
BSI BS ISO 3086 |
Iron Ores - Experimental Methods for Checking the Bias of Sampling |
|
BSI BS ISO 3271 |
Iron Ores - Determination of Tumble Strength (V) |
|
BSI BS ISO 3858 |
Rubber compounding ingredients Carbon Black Determination of light transmittance of toluene extract |
|
BSI BS ISO 3867 |
Composition cork Expansion joint fillers Test Methods |
|
BSI BS ISO 4714 |
Composition Cork - Specifications, Sampling, Packaging and Marking |
|
BSI BS ISO 6721-10 |
Plastics - Determination of Dynamic Mechanical Properties - Part 10: Complex Shear Viscosity Using a Parallel-Plate Oscillatory Rheometer-Supersedes BS 2782-3:Method 323G:1997; |
|
BSI BS ISO 7215 |
Iron Ores - Determination of Relative Reducibility (V) |
|
BSI BS ISO 7322 |
Composition Cork - Test Methods |
|
BSI BS ISO 7663 |
Halogenated isobutene-isoprene rubber (BIIR and CIIR) Evaluation procedures-Supersedes BS 6845:1996 |
|
BSI BS ISO 7992 |
Iron Ores - Determination of Reduction Properties Under Load (V) |
|
BSI BS ISO 8332 |
Rubber compounding ingredients Sulfur Methods of test |
|
BSI BS ISO 9349 |
Preinsulated ductile iron pipeline systems |
|
BSI BS ISO 9727-5 |
Cylindrical cork stoppers Physical tests Part 5: Determination of extraction force |
|
BSI BS ISO 9727-7 |
Cylindrical cork stoppers Physical tests Part 7: Determination of dust content |
|
BSI BS ISO 9924-1 |
Rubber and Rubber Products - Determination of the Composition of Vulcanizates and Uncured Compounds by Thermogravimetry - Part 1: Butadiene, Ethylene-Propylene Copolymer and Terpolymer, Isobutene-Isoprene, Isoprene and Styrene-Butadiene Rubbers-Supersedes BS 7164-15.1:1994; |
|
BSI BS ISO 9988-2 |
Plastics - Polyoxymethylene (POM) Moulding and Extrusion Materials - Part 2: Perparation of Test Specimens and Determination of Properties |
|
BSI DD CEN/TS 14425-3 |
Advanced technical ceramics Test methods for determination of fracture toughness of monolithic ceramics Part 3: Chevron notched beam (CNB) method |
|
BSI DD CEN/TS 14425-5 |
Advanced technical ceramics Test methods for determination of fracture toughness of monolithic ceramics Part 5: Single-edge vee-notch beam (SEVNB) method |
|
BSI DD CEN/TS 15022-4 |
Copper and copper alloys Determination of tin content Part 4: Medium tin content Flame atomic absorption spectrometry method (FAAS) |
|
BSI DD CEN/TS 15023-3 |
Copper and copper alloys Determination of nickel content Part 3: Flame atomic absorption spectrometry method (FAAS) |
|
BSI DD CEN/TS 843-6 |
Advanced technical ceramics Monolithic ceramics Mechanical properties at room temperature Part 6: Guidance for fractographic investigation |
|
BSI DD ENV 1099 |
Plywood - Biological Durability - Guidance for the Assessment of Plywood for Use in Different Hazard Classes-AMD 10424; April 15, 1999; |
|
BSI DD ENV 1156 |
Wood-Based Panels - Determination of Duration of Load and Creep Factors |
|
BSI DD ENV 12169 |
Criteria for the Assessment of Conformity of a Lot of Sawn Timber |
|
BSI DD ENV 13235 |
Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at High Temperature Under Inert Atmosphere - Determination of Creep Behaviour |
|
BSI DD ENV 14232 |
Advanced technical ceramics Terms, definitions and abbreviations |
|
BSI DD ENV 14273 |
Advanced Technical Ceramics - Ceramic Powders - Determination of Crystalline Phases in Zirconia |
|
BSI DD ENV 1927-1 |
Qualitative Classification of Softwood Round Timber - Part 1: Spruces and Firs |
|
BSI DD ENV 1927-3 |
Qualitative Classification of Softwood Round Timber - Part 3: Larches and Douglas Firs |
|
BSI DD ENV 623-5 |
Advanced Technical Ceramics Monolithic Ceramics General and Textural Properties Part 5: Determination of Phase Volume Fraction by Evaluation of Micrographs |
|
BSI DD ENV 635-4 |
Plywood - Classification by Surface Appearance Part 4: Parameters of Ability for Finishing - Guideline |
|
BSI DD ENV 820-4 |
Advanced Technical Ceramics - Monolithic Ceramics - Thermomechanical Properties - Part 4: Determination of Flexural Creep Deformation at Elevated Temperatures |
|
BSI PD 6619 |
Copper and Copper Alloys - Provisions and Procedures for the Allocation of Material Numbers and Registration of Materials |
|
BSI PD 6635 |
Non-Alloy Steel Rod for Drawing and/or Cold Rolling - General Purpose Rod, Rimmed and Rimmed Substitute Low Carbon Steel Rod, Rod for Special Applications - Requirements and Tests |