|
BSI BS ISO 14887 |
Sample Preparation - Dispersing Procedures for Powders in Liquids |
|
BSI BS ISO 16020 |
Steel for the reinforcement and prestressing of concrete Vocabulary |
|
BSI BS ISO 18593 |
Microbiology of food and animal feeding stuffs Horizontal methods for sampling techniques from surfaces using contact plates and swabs |
|
BSI BS ISO 1998-99 |
Petroleum Industry - Terminology - Part 99: General and Index |
|
BSI BS ISO 2710-2 |
Reciprocating Internal Combustion Engines - Vocabulary - Part 2: Terms for Engine Maintenance |
|
BSI BS ISO 6196-5 |
Micrographics - Vocabulary - Part 5: Quality of Images, Legibility, Inspection-AMD 10439: April 1999; Renumbers BS 6054: Part 5: 1988 |
|
BSI BS ISO 9564-2 |
Banking Personal Identification Number management and security Part 2: Approved algorithms for PIN encipherment |
|
BSI DD ENV ISO 11133-1 |
Microbiology of Food and Animal Feeding Stuffs - Guidelines on Quality Assurance and Performance Testing of Culture Media - Part 1: General Guidelines on Quality Assurance of Culture Media in the Laboratory |
|
BSI BS 1000 (615) |
Universal Decimal Classification (UDC). English Full Edition (615): Pharmaceutics. Therapeutics. Toxicology |
|
BSI BS 1000 (662) |
Universal Decimal Classification (UDC). English Full Edition (662): Explosives. Fuels |
|
BSI BS 1000 (664) |
Universal Decimal Classification (UDC). English Full Edition (664): Preparation and Preservation of Solid Foodstuffs |
|
BSI BS 1000 (681.7) |
Universal Decimal Classification (UDC). English Full Edition (681.7): Optical Apparatus and Instruments-Amd 2; |
|
BSI BS 1000 (69) |
Universal Decimal Classification (UDC). English Full Edition (69): Building |
|
BSI BS 1000 (77) |
Universal Decimal Classification (UDC). English Full Edition (77): Photography and Similar Processes |
|
BSI BS 1000 (8) |
Universal Decimal Classification English Full Edition UDC 8 Language. Linguistics. Literature |
|
BSI BS 2459 |
Set Squares (Fixed and Adjustable) for Drawing Office Use-AMD 2190: January 31, 1977; |
|
BSI BS 2987 |
Notes on the Application of Statistics to Paper Testing |
|
BSI BS 3282 |
Glossary of Terms Relating to Gas Chromatography |
|
BSI BS 3406 PART 8 |
Determination of Particle Size Distribution Part 8: Photon Correlation Spectroscopy-ISO 13321: 1996 |
|
BSI BS 4148 |
Abbreviation of Title Words and Titles of Publications |
|
BSI BS 4591 |
Method for Determination of Distillation Characteristics of Organic Liquids (Other Than Petroleum Products) |
|
BSI BS 4727PT5: GROUP 01 |
Electrotechnical, Power, Telecommunication, Electronics, Lighting and Colour Terms Part 5: Terms Particular to Electromedical Equipment Group 01: Radiology and Radiological Physics Terminology |
|
BSI BS 5192 PART 3 |
Guide to Production Control Part 3: Ordering Methods (G) |
|
BSI BS 5192 PART 6 |
Guide to Production Control Part 6: Computer Aided Production Control (G) |
|
BSI BS 5261-2 |
Copy preparation and proof correction Part 2: Specification for typographic requirements, marks for copy preparation and proof correction, proofing procedure |
|
BSI BS 5261C |
Copy Preparation and Proof Correction Part 2: Specification for Typographic Requirements, Marks for Copy Preparation and Proof Correction, Proofing Procedure 5261C: is an Extract from BS 5261 Part 2 (G) |
|
BSI BS 6100 SEC 4.2 |
Glossary of Building and Civil Engineering Terms Part 4: Forest Products Section 4.2: Sizes and Quantities of Solid Timber-AMD 7260: August 15, 1992; Partically Supersedes BS 565: 1972 |
|
BSI BS 6100 SUBSEC 1.7.2 |
Glossary of Building and Civil Engineering Terms Part 1: General and Miscellaneous Section 1.7: Characteristics and Performance Subsec. 1.7.2: Characteristics-AMD 7248: August 15, 1992 |
|
BSI BS 6100-1.5.1 |
Glossary of Building and Civil Engineering Terms - Part 1: General and Miscellaneous - Section 1.5: Operations; Associated Plant and Equipment - Subsection 1.5.1: Co-ordination of Dimensions; Tolerances and Accuracy |
|
BSI BS 7451 |
Archival Quality Bookbinding Leather (G) |
|
BSI BS 7527 SEC 2.1 |
Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Section 2.1: Temperature and Humidity (IEC 721-2-1: 1982) (G) |
|
BSI BS 7527-2.3 |
Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 2.3: Air pressure - (IEC 721-2-3: 1987) (G) |
|
BSI BS 8502 |
Graphical symbols and signs Creation and design of public information symbols Requirements |
|
BSI BS EN 12670 |
Natural Stone - Terminology |
|
BSI BS EN 12786 |
Safety of Machinery - Guidance for the Drafting of Vibration Clauses of Safety Standards |
|
BSI BS EN 12944-3 |
Fertilizers and Liming Materials - Vocabulary - Part 3: Terms Relating to Liming Materials |
|
BSI BS EN 13635 |
Irrigation Techniques - Localised Irrigation Systems - Terminology and Data to Be Supplied by the Manufacturer |
|
BSI BS EN 14012 |
Postal services - Quality of service - Measurement of complaints and redress procedures |
|
BSI BS EN 1748-1-1 |
Glass in building Special basic products Borosilicate glasses Part 1-1: Definition and general physical and mechanical properties-Supersedes BS EN 1748-1:1998 |
|
BSI BS EN 1948-1 |
Stationary Source Emissions - Determination of the Mass Concentration of PCDDs/PCDFs Part 1: Sampling |
|
BSI BS EN 60068-2-51 |
Environmental Testing - Part 2: Tests - Tests Z/BFc: Combined Dry Heat/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non-Heat Dissipating Specimens-Supersedes BS 2011-2.1Z/BFc:1984 |
|
BSI BS EN 60191-6-5 |
Mechanical Standardization of Semiconductor Devices - Part 6-5: General Rules for the Preparation of Outline Drawings of Surface Mounted Semiconductor Device Packages - Design Guide for Fine-Pitch Ball Grid Array (FBGA)-IEC 60191-6-5:2001; |
|
BSI BS EN 61355 |
Classification and Designation of Documents for Plants, Systems and Equipment |
|
BSI BS EN 844-4 |
Round and Sawn Timber - Terminology Part 4: Terms Relating to Moisture Content |
|
BSI BS EN ISO 10087 |
Small craft Craft identification Coding system |
|
BSI BS EN ISO 10272-1 |
Microbiology of food and animal feeding stuffs Horizontal method for detection and enumeration of Campylobacter spp. Part 1: Detection method-Supersedes BS 5763-17: 1996 |
|
BSI BS EN ISO 11593 |
Manipulating Industrial Robots - Automatic End Effector Systems - Vocabulary and Presentation of Characteristics |
|
BSI BS EN ISO 15785 |
Technical drawings Symbolic presentation and indication of adhesive, fold and pressed joints-CORR 14124: October 7, 2002; |
|
BSI BS EN ISO 20838 |
Microbiology of food and animal feeding stuffs Polymerase chain reaction (PCR) for the detection of food-borne pathogens Requirements for amplification and detection for qualitative methods |
|
BSI BS EN ISO 23953-1 |
Refrigerated display cabinets Part 1: Vocabulary-Supersedes BS EN 441-1: 1995 |
|
BSI BS EN ISO 4833 |
Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of microorganisms Colony-count technique at 30 degrees C-Corr 14451: April 11, 2003; CORR 16268: July 2006; Supersedes BS 5763-1: 1991 and BS 4285-3.14: 1988 |
|
BSI BS EN ISO 7088 |
Fish-meal - Vocabulary |
|
BSI BS EN ISO 772 |
Hydrometric determinations Vocabulary and symbols-AMD 14954: February 10, 2004; AMD 15677: September 29, 2006; |
|
BSI BS IEC 61366-4 |
Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 4: Guidelines for Technical Specifications for Kaplan and Propeller Turbines |
|
BSI BS IEC 61366-6 |
Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 6: Guidelines for Technical Specifications for Pump-Turbines |
|
BSI BS ISO 11843-4 |
Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value |
|
BSI BS ISO 13317-2 |
Determination of Particle Size Distribution by Gravitational Liquid Sedimentation Methods - Part 2: Fixed Pipette Method-Together with BS ISO 13317-1:2001 and BS ISO 13317-3:2001 it Supersedes BS 3406-2:1984; |
|
BSI BS ISO 14985 |
Hard-Copy Output of Engineering Drawings - Specification for the Structure of Control Files |
|
BSI BS ISO 20022-2 |
Financial services - UNIversal Financial Industry message scheme - Part 2: Roles and responsibilities of the registration bodies |
|
BSI BS ISO 4831 |
Microbiology of food and animal feeding stuffs Horizontal method for the detection and enumeration of coliforms Most probable number technique-Supersedes BS 5763-3:1991 |
|
BSI BS ISO 6426-2 |
Horological vocabulary Part 2: Technical and commercial definitions-CORR 14892: January 14, 2004; |
|
BSI BS ISO 857-2 |
Welding and allied processes Vocabulary Part 2: Soldering and brazing processes and related terms-ISO 857-2:2005 |
|
BSI DD 246 |
Recommendations for the Use of the Cone Calorimeter |
|
BSI DD IEC TS 60695-7-3 |
Fire hazard testing Part 7-3: Toxicity of fire effluent Use and interpretation of test results-Supersedes PD IEC TR 60695-7-3: 1998 |
|
BSI PAS 85 |
A Quality Management System to Ensure the Integrity and Traceability of Primary Products in the Agri-food Chain |
|
BSI PD 6615 |
Guide to Setting up a Parts Database |
|
BSI PD 6644-2 |
Proficiency Testing by Interlaboratory Comparisons - Part 2: Selection and Use of Proficiency Testing Schemes by Laboratory Accreditation Bodies-ISO/IEC Guide 43-2: 1997; |
|
BSI PD CEN/TR 13833 |
Qualification of construction enterprises |
|
BSI PD CEN/TR 14599 |
Terms and definitions for welding purposes in relation with EN 1792-:2002 |
|
BSI PD IEC TR 60695-7-2 |
Fire Hazard Testing Part 7-2: Toxicity of Fire Effluent Summary and Relevance of Test Methods |
|
BSI PD ISO/TR 22134 |
Practical guidelines for socioterminology |
|
BSI BS 3047 |
Sizes of Posters |
|
BSI BS 3473 PART 3 |
Chemical Resistance of Glass Used in the Production of Laboratory Glassware Part 3: Method for Determination of Hydrolytic Resistance of Glass Grains at 121 Degrees Centigrade |
|
BSI BS 3484 |
Blue-Black Record Inks |
|
BSI BS 3730 PART 2 |
Assessment of Departures from Roundness Part 2: Characteristics of Stylus Instruments for Measuring Variations in Radius (Including Guidance on Use and Calibration) |
|
BSI BS 4462 |
Guide for the preparation of technical sales literature for measuring instruments and process control equipment |
|
BSI BS 4618 SEC 1.1 |
Recommendations for the Presentation of Plastics Design Data Part 1: Mechanical Properties Section 1.1: Creep |
|
BSI BS 4618 SEC 1.3 |
Recommendations for the Presentation of Plastics Design Data Part 1: Mechanical Properties Section 1.3: Strength |
|
BSI BS 4618 SEC 3.2 |
Recommendations for the Presentation of Plastics Design Data Part 3: Thermal Properties Section 3.2: Heat Content |
|
BSI BS 4618 SUBSEC 1.1.3 |
Recommendations for the Presentation of Plastics Design Data Part 1: Mechanical Properties Section 1.1: Creep Subsection 1.1.3: Creep Lateral Contraction Ratio (Poisson's Ratio) |
|
BSI BS 4727PT3: GROUP 12 |
Electrotechnical, Power, Telecommunication, Electronics, Lighting and Colour Terms Part 3: Terms Particular to Telecommunications and Electronics Group 12: Telecommunications, Channels and Networks-(IEC 50(701): 1988) |
|
BSI BS 6100 SEC 4.5 |
Glossary of Building and Civil Engineering Terms Part 4: Forest Products Section 4.5: Cork-Supersedes BS 3519: 1962 |
|
BSI BS 7872 |
Manned Security Services - Cash-In-Transit Services (Collection and Delivery) Code of Practice-AMD 16744: October 31, 2006 |
|
BSI BS 7890 |
Method for Achieving Good Payment Performance in Commercial Transactions (G) |
|
BSI BS 8419-2 |
Interoperability between metadata systems used for learning, education and training Part 2: Code of practice for the development of interoperability between application profiles |
|
BSI BS 8496 |
Water quality – Enumeration of micro-organisms in water samples – Guidance on the estimation of variation of results with particular reference to the contribution of uncertainty of measurement |
|
BSI BS 8723-1 |
Structured vocabularies for information retrieval Guide Part 1: Definitions, symbols and abbreviations-Together with BS 8723-2: 2005 Supersedes BS 5723: 1987 |
|
BSI BS 8723-2 |
Structured vocabularies for information retrieval Guide Part 2: Thesauri-Together with BS 8723-1: 2005 Supersedes BS 5723: 1987 |
|
BSI BS EN 12674-1 |
Roll Containers - Part 1: Terminology |
|
BSI BS EN 12674-2 |
Roll Containers - Part 2: General Design and Safety Principles |
|
BSI BS EN 12701 |
Structural Adhesives - Storage - Determination of Words and Phrases Relating to the Product Life of Structural Adhesives and Related Materials |
|
BSI BS EN 12913 |
Products Used for Treatment of Water Intended for Human Consumption - Powdered Diatomaceous Earth |
|
BSI BS EN 13809 |
Tourism services Travel agencies and tour operators Terminology |
|
BSI BS EN 14142-1 |
Postal services Address databases Part 1: Components of postal addresses |
|
BSI BS EN 14665 |
Thermal spraying Thermally sprayed coatings Symbolic representation on drawings |
|
BSI BS EN 14873-2 |
Furniture removal activities Storage of furniture and personal effects for private individuals Part 2: Provision of the service |
|
BSI BS EN 61187 |
Electrical and Electronic Measuring Equipment - Documentation-Supersedes BS 4308: 1979 |
|
BSI BS EN 61675-1 |
Radionuclide Imaging Devices - Characteristics and Test Conditions - Part 1: Positron Emission Tomographs-IEC 61675-1: 1998; |
|
BSI BS EN 844-10 |
Round and Sawn Timber - Terminology - Part 10: Terms Relating to Stain and Fungal Attack |
|
BSI BS EN 844-12 |
Round and Sawn Timber - Terminology - Part 12: Additional Terms and General Index |
|
BSI BS EN ISO 16348 |
Metallic and other inorganic coatings Definitions and conventions concerning appearance |
|
BSI BS EN ISO 7287 |
Graphical symbols for thermal cutting equipment-CORR 13950: May 30, 2002; |
|
BSI BS EN ISO 8130-14 |
Coating powders Part 14: Terminology-Also Known as BS 3900-J14:2004 |
|
BSI BS ISO 10126-2 |
Banking - Procedures for Message Encipherment (Wholesale) - Part 2: DEA Algorithm (G) |
|
BSI BS ISO 13318-1 |
Determination of Particle Size Distribution by Centrifugal Liquid Sedimentation Methods Part 1: General Principles and Guidelines-Together with BS ISO 13318-2 and BS ISO 13318-3 (to Be Published), it Supersedes BS 3406-6: 1985, Which Will Be Withdrawn on Publication of BS ISO 11318-3; |
|
BSI BS ISO 13616-2 |
Financial services - International bank account number (IBAN) - Part 2: Role and responsibilities of the Registration Authority |
|
BSI BS ISO 15213 |
Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions |
|
BSI BS ISO 15706 |
Information and documentation International Standard Audiovisual Number (ISAN) |
|
BSI BS ISO 18115 |
Surface chemical analysis Vocabulary-AMD 16309: August 2006 |
|
BSI BS ISO 1998-7 |
Petroleum Industry - Terminology - Part 7: Miscellaneous Terms |
|
BSI BS ISO 21528-2 |
Microbiology of food and animal feeding stuffs Horizontal methods for the detection and enumeration of Enterobacteriaceae Part 2: Colony-count method-Together with BS ISO 21528-1 supersedes BS 5763-10:1993 |
|
BSI BS ISO 23833 |
Microbeam analysis - Electron probe microanalysis (EPMA) - Vocabulary |
|
BSI BS ISO 3272-4 |
Microfilming of Technical Drawings and Other Drawing Office Documents - Part 4: Microfilming of Drawings of Special and Exceptional Elongated Sizes (G) |
|
BSI BS ISO 3509 |
Coffee and coffee products Vocabulary-Supersedes BS 5456: 1990 |
|
BSI BS ISO 7251 |
Microbiology of food and animal feeding stuffs Horizontal method for the detection and enumeration of presumptive Escherichia coli Most probable number technique-Supersedes BS 5763-8:1994 and BS ISO 11866-1:1997 |
|
BSI BS ISO/IEC 19762-3 |
Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 3: Radio frequency identification (RFID) |
|
BSI DD 203 PART 1 |
Industrial Automation: Shop Floor Production Part 1: Reference Model for Standardization and a Methodology for Identification of Requirements |
|
BSI DD CEN/TS 14773 |
Postal services Quality of service Measurement of loss and substantial delay in priority and first class single piece mail using a survey of test letters |
|
BSI DD CEN/TS 15448 |
Postal services Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) |
|
BSI DD ENV 12017 |
Medical Informatics - Medical Informatics Vocabulary (MIVoc) |
|
BSI PAS 40 |
Banknote theft deterrent systems using dye or smoke-dye |
|
BSI PD CLC/TR 50442 |
Guidelines for product committees on the preparation of standards related to human exposure from electromagnetic fields-Supersedes PD CR R106-001:2002 |
|
BSI PD ISO/TR 19033 |
Technical Product Documentation - Metadata for Construction Documentation-ISO/TR 19033:2000; |
|
BSI PD ISO/TR 211 |
Essential Oils - General Rules for Labelling and Marking Containers-ISO/TR 211: 1999; |
|
BSI BS 1000:AUX 1E (41/435) |
Universal Decimal Classification - Auxiliary Table 1e (41/435), Common Auxiliaries of Place for United Kingdom and Germany Extended Edition-Supersedes BS 1000:Auxiliaries 1(e): Part 1, Part 2, and Part 3; |
|
BSI BS 3459 |
Stands for Drawing Boards |
|
BSI BS 3473 PART 1 |
Chemical Resistance of Glass Used in the Production of Laboratory Glassware Part 1: Method for Determination of Resistance of Glass to Attack by a Boiling Aqueous Solution of Mixed Alkali |
|
BSI BS 3473 SEC 4.1 |
Chemical Resistance of Glass Used in the Production of Laboratory Glassware: Part 4: Methods for Determination of Hydrolytic Resistance of the Interior Surfaces of Glass Containers: Section 4.1: Determination by Titration Method and Classification |
|
BSI BS 3484-1 |
Record inks Part 1: Specification for blue-black inks-AMD 8071:February 1994; Supersedes BS 3484:1962 |
|
BSI BS 4358 |
Glossary of Terms Used in Air Gauging with Notes on the Technique |
|
BSI BS 4618 SEC 2.1 |
Recommendations for the Presentation of Plastics Design Data Part 2: Electrical Properties Section 2.1: Permittivity |
|
BSI BS 4618 SEC 2.3 |
Recommendations for the Presentation of Plastics Design Data Part 2: Electrical Properties Section 2.3: Volume Resistivity |
|
BSI BS 4618 SEC 3.3 |
Recommendations for the Presentation of Plastics Design Data Part 3: Thermal Properties Section 3.3: Thermal Conductivity |
|
BSI BS 4618 SEC 4.3 |
Recommendations for the Presentation of Plastics Design Data Part 4: Environmental and Chemical Effects Section 4.3: Resistance to Colour Change Produced by Exposure to Light |
|
BSI BS 4618 SEC 4.4 |
Recommendations for the Presentation of Plastics Design Data Part 4: Environmental and Chemical Effects Section 4.4: The Effects on Plastics of Marine Exposure |
|
BSI BS 4618 SEC 4.5 |
Recommendations for the Presentation of Plastics Design Data Part 4: Environmental and Chemical Effects Section 4.5: The Effects on Plastics of Soil Burial and Biological Attack |
|
BSI BS 4618 SEC 5.2 |
Recommendations for the Presentation of Plastics Design Data Part 5: Other Properties Section 5.2: Change in Linear Dimensions with Moisture Absorption |
|
BSI BS 4618 SUBSEC 1.1.2 |
Recommendations for the Presentation of Plastics Design Data Part 1: Mechanical Properties Section 1.1: Creep Subsection 1.1.2: Creep in Flexureat Low Strains-Amd 1; |
|
BSI BS 5109 |
Glossary of Terms Used in Assessing the Performance of Optical Devices and Systems |
|
BSI BS 5192 PART 2 |
Guide to Production Control Part 2: Production Programming (Q) |
|
BSI BS 5729 PART 5 |
(OBSOLETE)) 1980 Stock Control Part 5: Storekeeping (G) |
|
BSI BS 6478 |
Filing Bibliographic Information in Libraries and Documentation |
|
BSI BS 6601 |
Mail Payment Orders-ISO 6260: 1984; |
|
BSI BS 6897 PART 5 |
Experimental Determination of Mechanical Mobility Part 5: Measurement Using Impact Excitation with an Exciter Which is Not Attached to the Structure (ISO 7626-5: 1994) (G) |
|
BSI BS 7227 |
Procedures for the Application of ISO 7812 to Allocate UK Issuer Identification Numbers (UK IINs) for Use on Identification Cards |
|
BSI BS 7308 |
Method for Presentation of Dimensional Accuracy Data in Building Constructions |
|
BSI BS 7502 |
General Criteria for the Assessment of Testing Laboratories |
|
BSI BS 7590 |
Method for Statistically Estimating the Volume Fraction of Phases and Constituents by Systematic Manual Point Counting with a Grid |
|
BSI BS 7802 |
Glossary of Terms Used in Operational Research (G) |
|
BSI BS 8430 |
Terminology work Fundamentals made simple |
|
BSI BS 9612 N008 |
Detail specification for cold welded seal quartz crystal units for oscillator applications DN, DQ and DP enclosures, 50 to 125 MHz frequency range Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) Full assessment level |
|
BSI BS EN 12911 |
Products Used for Treatment of Water Intended for Human Consumption - Manganese Greensand |
|
BSI BS EN 14076 |
Timber stairs Terminology |
|
BSI BS EN 14394 |
Heating boilers Heating boilers with forced draught burners Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
|
BSI BS EN 14799 |
Air filters for general air cleaning - Terminology |
|
BSI BS EN 1556 |
Bar Coding - Terminology |
|
BSI BS EN 31253 |
Lasers and Laser-Related Equipment - Laser Device - Mechanical Interfaces (ISO 11253: 1993) (G) |
|
BSI BS EN 844-1 |
Round and Sawn Timber - Terminology Part 1: General Terms Common to Round Timber and Sawn Timber |
|
BSI BS EN 844-11 |
Round and Sawn Timber - Terminology - Part 11: Terms Relating to Degrade by Insects |
|
BSI BS EN 844-2 |
Round and Sawn Timber - Terminology Part 2: General Terms Relating to Round Timber-AMD 9895: February 15, 1998; |
|
BSI BS EN 844-6 |
Round and Sawn Timber - Terminology Part 6: Terms Relating to Dimensions of Sawn Timber |
|
BSI BS EN 844-8 |
Round and Sawn Timber - Terminology Part 8: Terms Relating to Features of Round Timber |
|
BSI BS EN 844-9 |
Round and Sawn Timber - Terminology Part 9: Terms Relating to Features of Sawn Timber |
|
BSI BS EN 9133 |
Aerospace series Quality management systems Qualification procedure for aerospace standard parts-Supersedes BS EN 3042:1992 |
|
BSI BS EN ISO 11807-1 |
Integrated optics Vocabulary Part 1: Basic terms and symbols |
|
BSI BS ISO 11698-1 |
Micrographics - Methods of Measuring Image Quality Produced by Aperture Card Scanners - Part 1: Characteristics of the Test Images |
|
BSI BS ISO 12199 |
Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet |
|
BSI BS ISO 12615 |
Bibliographic references and source identifiers for terminology work |
|
BSI BS ISO 12637-5 |
Graphic Technology - Multilingual Terminology of Printing Arts - Part 5: Screen Printing Terms-Supersedes BS ISO 12637-2: 1997; |
|
BSI BS ISO 12789 |
Reference Neutron Radiations - Characteristics and Methods of Production of Simulated Workplace Neutron Fields |
|
BSI BS ISO 13318-2 |
Determination of Particle Size Distribution by Centrifugal Liquid Sedimentation Methods Part 1: Photcentrifuge Method-Together with BS ISO 13318-1 and BS ISO 13318-3 (to Be Published), it Supersedes BS 3406-6: 1985, Which Will Be Withdrawn on Publication of BS ISO 11318-3; |
|
BSI BS ISO 13448-2 |
Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 2: Coordinated single sampling plans for acceptance sampling by attributes |
|
BSI BS ISO 14416 |
Information and documentation Requirements for binding of books, periodicals, serials and other paper documents for archive and library use Methods and materials |
|
BSI BS ISO 14648-1 |
Micrographics - Quality Control of COM Recorders That Generate Images Using a Single Internal Display System - Part 1: Characteristics of the software test target |
|
BSI BS ISO 15553 |
Water quality Isolation and identification of Cryptosporidium oocysts and Giardia cysts from water |
|
BSI BS ISO 16269-8 |
Statistical interpretation of data Part 8: Determination of prediction intervals |
|
BSI BS ISO 20022-1 |
Financial services UNIversal Financial Industry message scheme Part 1: Overall methodology and format specifications for inputs to and outputs from the ISO 20022 Repository-Supersedes BS ISO 15022-1:1999 |
|
BSI BS ISO 20128 |
Milk products - Enumeration of presumptive Lactobacillus acidophilus on a selective medium - Colony-count technique at 37 °C |
|
BSI BS ISO 3272-5 |
Microfilmimg of Technical Drawings and Other Drawing Office Documents - Part 5: Test Procedures for Diazo Duplicating of Microfilm Images in Aperture Cards |
|
BSI BS ISO 5681 |
Equipment for Crop Protection Vocabulary-Supersedes BS 6355: 1983; |
|
BSI BS ISO 6196-4 |
Micrographics - Vocabulary - Part 4: Materials and Packaging-Supersedes BS 6054-4: 1987; |
|
BSI BS ISO 6243 |
Climatic Data for Building Design - Proposed System of Symbols |
|
BSI BS ISO 6980-3 |
Nuclear energy Reference beta-particle radiation Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence-Together with BS ISO 6980-1:2006 and BS ISO 6980-2:2004 it supersedes BS ISO 6980:1996 |
|
BSI BS ISO 7967-1 |
Reciprocating internal combustion engines - Vocabulary of components and systems - Part 1: Structure and external covers |
|
BSI DD 203 PART 2 |
Industrial Automation: Shop Floor Production Part 2: Application of the Reference Model for Standardization and Methodology (G) (ISO/TR 10314-2: 1991) |
|
BSI DD CEN ISO/TS 20836 |
Microbiology of food and animal feeding stuffs Polymerase chain reaction (PCR) for the detection of food-borne pathogens Performance testing for thermal cyclers |
|
BSI DD CEN/TS 14482 |
Postal services Trays for international letter mail Test methods and performance requirements |
|
BSI DD CEN/TS 15357 |
Solid recovered fuels - Terminology, definitions and descriptions |
|
BSI DD CLC/TS 50131-7 |
Alarm systems Intrusion systems Part 7: Application guidelines |
|
BSI DD ENV 13710 |
European Ordering Rules - Ordering of Characters from the Latin, Greek and Cyrillic Scripts |
|
BSI DD ISO/TS 10272-2 |
Microbiology of food and animal feeding stuffs Horizontal method for detection and enumeration of Campylobacter spp. Part 2: Colony-count technique |
|
BSI DD ISO/TS 16649-3 |
Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of |
|
BSI PD 6495 |
IFAN - Guide 1 Method for Determining the Advantages of (Company) Standardization Projects (G) |
|
BSI PD 6612 |
Guidance on the Preparation of Codes of Practice for Building |
|
BSI PD CEN/TR 14709 |
Postal services Quality of service Guide for the implementation of EN 13850 |
|
BSI PD CR 13436 |
Geographic Information - Vocabulary |
|
BSI PD CR 13737 |
Implementation Guide for Functional Standards Prepared by CEN/TC 234 |
|
BSI PD ISO/TR 20983 |
Information and documentation Performance indicators for electronic library services |
|
BSI BS 1000 (5/50) |
Universal Decimal Classification (UDC). English Full Edition (5/50): Exact Sciences in General. Nature Study. Environmental Sciences |
|
BSI BS 1808 |
Cut Business Forms and Letterheads (AMD 5612) July 31, 1987-Amd 1; |
|
BSI BS 3473 SEC 4.2 |
Chemical Resistance of Glass Used in the Production of Laboratory Glassware: Part 4: Methods for Determination of Hydrolytic Resistance of the Interior Surfaces of Glass Containers: Section 4.2: Determination by Flame Photometry and Classification |
|
BSI BS 4559 SEC 9.2 |
Preparation of Calibration Gas Mixtures Part 9: Comparison Methods and Methods for Establishing Traceability Section 9.2: Checking by a Comparison Method |
|
BSI BS 4618 SEC 1.2 |
Recommendations for the Presentation of Plastics Design Data Part 1: Mechanical Properties Section 1.2: Impact Behaviour |
|
BSI BS 4618 SEC 2.2 |
Recommendations for the Presentation of Plastics Design Data Part 2: Electrical Properties Section 2.2: Loss Tangent |
|
BSI BS 4618 SEC 4.6 |
Recommendations for the Presentation of Plastics Design Data Part 4: Environmental and Chemical Effects Section 4.6: The Thermal Endurance of Plastics |
|
BSI BS 4618 SEC 5.1 |
Recommendations for the Presentation of Plastics Design Data Part 5: Other Properties Section 5.1: Density |
|
BSI BS 4618 SEC 5.3 |
Recommendations for the Presentation of Plastics Design Data Part 5: Other Properties Section 5.3: Optical Properties |
|
BSI BS 4618 SEC 5.6 |
Recommendations for the Presentation of Plastics Design Data Part 5: Other Properties Section 5.6: Guide to Sliding Friction |
|
BSI BS 5192 PART 5 |
Guide to Production Control Part 5: the Relationship Between Production Control and Other Management Functions (G) |
|
BSI BS 5537 |
Forms Design Sheet and Layout Chart |
|
BSI BS 6723 |
Guide to Establishment and Development of Multilingual Thesauri |
|
BSI BS 6897 PART 2 |
Experimental Determination of Mechanical Mobility Part 2: Measurements Using Single Point Translation Excitation with an Attached Vibration Exciter (G) |
|
BSI BS 7410 |
Glossary of Terms Used in Industrial Screening |
|
BSI BS 7843-3.2 |
Guide to the acquisition and management of meteorological precipitation data Part 3: Specification for raingauges Section 3.2: Tipping bucket raingauge |
|
BSI BS 7918-1 |
Visual Imperfections in Rubber Products Part 1: Vocabulary |
|
BSI BS 8419-1 |
Interoperability between metadata systems used for learning, education and training Part 1: Code of practice for the development of application profiles |
|
BSI BS 8463 |
Specification for customer billing practice |
|
BSI BS EN 12433-2 |
Industrial, Commercial and Garage Doors and Gates - Terminology - Part 2: Parts of Doors |
|
BSI BS EN 12522-2 |
Furniture Removal Activities - Furniture Removal for Private Individuals - Part 2: Provision of Service |
|
BSI BS EN 12526 |
Castors and Wheels - Vocabulary, Recommended Symbols and Multilingual Dictionary |
|
BSI BS EN 12832 |
Characterisation of Sludges - Utilisation and Disposal of Sludges - Vocabulary |
|
BSI BS EN 14137 |
Postal services Quality of service Measurement of loss of registered mail and other types of postal service using a track and trace system |
|
BSI BS EN 1438 |
Symbols for Timber and Wood-Based Products |
|
BSI BS EN 14534 |
Postal services - Quality of service - Measurement of the transit time of end-to-end services for bulk mail-AMD 17115: May 31, 2007 |
|
BSI BS EN 14873-1 |
Furniture removal activities Storage of furniture and personal effects for private individuals Part 1: Specification for the storage facility and related storage provision |
|
BSI BS EN 20535 |
Paper and Board - Determination of Water Absorptiveness - Cobb Method (AMD 8174) December 15, 1994 (ISO 535: 1991) (Formerly BS 2644: 1991 Replaces BS 2644: 1980) (G)-Amd 1; |
|
BSI BS EN 61675-3 |
Radionuclide Imaging Devices - Characteristics and Test Conditions Part 3: Gamma Camera Based Wholebody Imaging Systems-IEC 61675-3: 1998; |
|
BSI BS EN 61725 |
Analytical Expression for Daily Solar Profiles-IEC 61725: 1997; |
|
BSI BS EN 844-7 |
Round and Sawn Timber - Terminology Part 7: Terms Relating to Anatomical Structure of Timber |
|
BSI BS EN ISO 18513 |
Tourism services Hotels and other types of tourism accommodation Terminology |
|
BSI BS EN ISO 19108 |
Geographic information Temporal schema-AMD 15564:March 1, 2005; Renumbers BS ISO 19108:2002 |
|
BSI BS EN ISO 19111 |
Geographic information Spatial referencing by coordinates-AMD 15565:March 3, 2005; Renumbers BS ISO 19111:2003 |
|
BSI BS EN ISO 7437 |
Technical Drawings - Construction Drawings - General Rules for Execution of Production Drawings for Prefabricated Structural Components (G) |
|
BSI BS ISO 12616 |
Translation-Oriented Terminography |
|
BSI BS ISO 14461-2 |
Milk and milk products Quality control in microbiological laboratories Part 2: Determination of the reliability of colony counts of parallel plates and subsequent dilution steps |
|
BSI BS ISO 14648-2 |
Micrographics - Quality Control of COM Recorders That Generate Images Using a Single Internal Display System - Part 2: Method of Use |
|
BSI BS ISO 15707 |
Information and Documentation - International Standard Musical Work Code (ISWC) |
|
BSI BS ISO 3272-2 |
Microfilming of Technical Drawings and Other Drawing Office Documents Part 2: Quality Criteria and Control of 35 mm Silver Gelatin Microfilms (G) |
|
BSI BS ISO 3901 |
Information and Documentation - International Standard Recording Code (ISRC) |
|
BSI BS ISO 6196-10 |
Micrographics - Vocabulary - Part 10: Index |
|
BSI BS ISO 7341 |
Banking - Nostro Accounts Reconciliation |
|
BSI BS ISO 8784-1 |
Pulp, paper and board Microbiological examination Part 1: Total count of bacteria, yeast and mould based on disintegration |
|
BSI BS ISO 9019 |
Securities - Numbering of Certificates-Supersedes BS 7103: 1989; |
|
BSI DD CEN/TS 14442 |
Postal services Automated processing of mail items Facing identification marks |
|
BSI DD CEN/TS 14567 |
Postal services Automated processing of mail items Address block locator |
|
BSI DD CEN/TS 14631 |
Postal services Automatic identification of receptacles and containers Receptacle asset numbering |
|
BSI DD ENV 13712 |
Postal Services - Forms - Harmonised Vocabulary |
|
BSI DD IEC TS 62282-1 |
Fuel cell technologies Part 1: Terminology |
|
BSI PD 6505 |
Romanization of Korean |
|
BSI PD CR 14245 |
Guidelines for the application of EN "Conformity Evaluation" |
|
BSI BS 1000 (37) |
Universal Decimal Classification (UDC). English Full Edition (37): Education. Teaching. Training. Leisure |
|
BSI BS 1000:AUX 1E (71+73) |
Universal Decimal Classification - Auxiliary Table 1e (71+73) - Common Auxiliaries of Place for Canada and the United States of America, Extended Edition-Replaces BS 1000 Aux I(e)-3: 1993; |
|
BSI BS 1101 |
Pressure Containers for Paint and Other Similar Substances-Amd 1; |
|
BSI BS 3473 PART 2 |
Chemical Resistance of Glass Used in the Production of Laboratory Glassware Part 2: Method for Determination of Hydrolytic Resistance of Glass Grains at 98 Degrees Centigrade |
|
BSI BS 3484-2 |
Record Inks - Part 2: Specification for Permanent Inks |
|
BSI BS 3517 |
Thermal Shock Tests on Laboratory Glassware (ISO 718: 1990) |
|
BSI BS 3730 PART 1 |
Assessment of Departures from Roundness Part 1: Glossary of Roundness Measurement Terms |
|
BSI BS 3730 PART 3 |
Assessment of Departures from Roundness Part 3: Methods for Determining Departures from Roundness Using Two - and - Three Point Measurement |
|
BSI BS 4618 SEC 3.1 |
Recommendations for the Presentation of Plastics Design Data Part 3: Thermal Properties Section 3.1: Linear Thermal Expansion |
|
BSI BS 4618 SEC 4.2 |
Recommendations for the Presentation of Plastics Design Data Part 4: Environmental and Chemical Effects Section 4.2: Resistance to Natural Weathering |
|
BSI BS 4618 SEC 5.4 |
Recommendations for the Presentation of Plastics Design Data Part 5: Other Properties Section 5.4: Acoustical Properties (Mechanical Damping Capacity) |
|
BSI BS 4618 SEC 5.5 |
Recommendations for the Presentation of Plastics Design Data Part 5: Other Properties Section 5.5: Data on Diffusion |
|
BSI BS 4618 SUBSEC 1.1.1 |
Recommendations for the Presentation of Plastics Design Data Part 1: Mechanical Properties Section 1.1: Creep Subsection 1.1.1: Creep in Uniaxial Tension or Compression (with Particular Reference to Solid Plastics) |
|
BSI BS 5192 PART 4 |
Guide to Production Control Part 4: Dispatching (Shop-Floor Control) (G) |
|
BSI BS 5332 |
Data Elements for the Generation and Exchange of Serials Records |
|
BSI BS 5543 |
Vacuum Technology. Graphical Symbols |
|
BSI BS 5999 |
Serials Holdings Statements for Libraries and Documentation Centres-Amd 1; |
|
BSI BS 6897 PART 1 |
Experimental Determination of Mechanical Mobility Part 1: Transducers |
|
BSI BS 7527-2.7 |
Classification of environmental conditions - Part 2: Environmental conditions appearing in nature Section 2.7 Fauna and flora |
|
BSI BS 7712 |
Graphical Symbols for Reciprocating Internal Combustion Engines (ISO 8999: 1993) (G)-Covered by ISO 8999:2001 |
|
BSI BS CECC 75201-013 |
Electronic Components of Assessed Quality Detail Specification in Accordance with BS EN 175 200 |
|
BSI BS EN 12216 |
Shutters, external blinds, internal blinds - Terminology, glossary and definitions |
|
BSI BS EN 12433-1 |
Industrial, Commercial and Garage Doors and Gates - Terminology - Part 1: Types of Doors |
|
BSI BS EN 13025-2 |
Packaging Light gauge metal containers Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml-Together with BS EN 13025-1 and BS EN 13025-3, Supersedes BS EN 13025:2000 |
|
BSI BS EN 13481-1 |
Railway Applications - Track - Performance Requirements for Fastening Systems - Part 1: Definitions-AMD 16587: September 29, 2006 |
|
BSI BS EN 13549 |
Cleaning Services - Basic Requirements and Recommendations for Quality Measuring Systems |
|
BSI BS EN 13701 |
Space Systems - Glossary of Terms |
|
BSI BS EN 13798 |
Hydrometry - Specification for a reference raingauge pit |
|
BSI BS EN 14035-1 |
Fireworks Part 1: Terminology-CORR 15904: January 18, 2006; Together with BS EN 14035-2:2003 supersedes BS 7114-1:1988; |
|
BSI BS EN 45503 |
Attestation Standard for the Assessment of Contract Award Procedures of Entities Operating in the Water, Energy, Transport and Telecommunication Sectors (G) |
|
BSI BS EN 62023 |
Structuring of Technical Information and Documentation-IEC 62023:2000; |
|
BSI BS EN 62309 |
Dependability of products containing reused parts Requirements for functionality and tests |
|
BSI BS EN 844-3 |
Round and Sawn Timber - Terminology Part 3: General Terms Relating to Sawn Timber |
|
BSI BS EN 844-5 |
Round and Sawn Timber - Terminology Part 5: Terms Relating to Dimensions of Round Timber-AMD 9896: February 15, 1998; |
|
BSI BS EN ISO 11807-2 |
Integrated optics Vocabulary Part 2: Terms used in classification |
|
BSI BS EN ISO 14539 |
Manipulating industrial robots Object handling with grasp-type grippers Vocabulary and presentation of characteristics |
|
BSI BS EN ISO 6414 |
Technical Drawings for Glassware (AMD 8620) May 15, 1995 (Formerly BS 2774: 1983) (G)-Amd 1; |
|
BSI BS ISO 10126-1 |
Banking - Procedures for Message Encipherment (Wholesale) Part 1: General Principles (G) |
|
BSI BS ISO 10550 |
Micrographics - Planetary Camera Systems - Test Target for Checking Performance (G) |
|
BSI BS ISO 11698-2 |
Micrographics - Methods of Measuring Image Quality Produced by Aperture Card Scanners - Part 2: Quality Criteria and Control |
|
BSI BS ISO 12651 |
Electronic Imaging - Vocabulary |
|
BSI BS ISO 13218 |
Road Vehicles - Child Restraint Systems - Report Form for Accidents Involving Child Passengers |
|
BSI BS ISO 17080 |
Manually portable agricultural and forestry machines and powered lawn and garden equipment - Design principles for single-panel product safety labels |
|
BSI BS ISO 3272-6 |
Microfilming of Technical Drawings and Other Drawing Office Documents - Part 6: Quality Criteria and Control of Systems for Enlargement from 35mm Microfilm |
|
BSI BS ISO 9230 |
Information and documentation - Determination of price indexes for print and electronic media purchased by libraries |
|
BSI DD IEC/PAS 62400 |
Structuring principles for technical products and technical product documentation Letter codes Main classes and subclasses of objects according to their purpose and task |
|
BSI DD ISO/TS 19036 |
Microbiology of food and animal feeding stuffs Guidelines for the estimation of measurement uncertainty for quantitative determinations |
|
BSI PD 6597 |
Biotechnology - Microorganisms - Examination of the Various Existing Lists of Plant Pathogens and Production of a Report (CR 12292: 1996) (G) |
|
BSI PD CEN/TR 15369 |
Postal services Quality of service Guide for the implementation of EN 14534 Measurement of the transit time of end-to-end services for bulk mail |
|
BSI PD ISO/TR 16056-1 |
Health informatics Interoperability of telehealth systems and networks Part 1: Introduction and definitions |