GOST 10006 |
Metal tubes. Tensile test method |
GOST 10493 |
Rigin and compensating lens-shaped seals for pn20-100 mpa (200- 1000 kgf/cm2). Technical specifications |
GOST 10495 |
HEXAGON NUTS FOR FLANGE JOINTS FOR PN ABOVE 10 TO 100 MPa (ABOVE 100 TO 1000 kgf/cm2). SPECIFICATIONS |
GOST 10498 |
Especially thin-walled seamless tubes from corrosion-resistant steel. Specifications |
GOST 10616 |
Radial and axial fans. Dimensions and parameters |
GOST 10704 |
Electrically welded steel line-weld tubes. Range |
GOST 11017 |
Steel seamless tubes for high pressure service. Specifications |
GOST 11249 |
Steel rolled up soldered double-layer tubes. Specifications |
GOST 11383 |
Thin-walled copper and brass tubes. Specifications |
GOST 11442 |
General-purpose asxial fans. General specification |
GOST 11823 |
Lift check values for Pnom < or = 25 MPA (250 KGF/SM2). General specifications |
GOST 12.2.016 |
Occupational safety standards system. Gas compressing equipment. General safety requirements |
GOST 12.2.016.1 |
Occurational safety standards system. Compressing equipment. Determination of noise characteristics. General requirments |
GOST 12.2.016.2 |
Occupational safety standards system. CoMpression equipment. Noise characteristics determination method of stationary compressor sets |
GOST 12.2.016.3 |
Occupational safety standards system. Compressing equipment. Determination method of noise characteristics of mobile compressor stations |
GOST 12.2.016.4 |
Occupational safety standards system. Compressing equipment. Determination method of noise characteristics of stationary compressor stations and installations |
GOST 12.2.016.5 |
"Occupational safety standards system. Compressing equipment. Noise characteristics and antinoise protection. Lay-out ( composition, formulation, contents ) of technical documentation" |
GOST 12.2.028 |
Occupational safety standards system. Ventilators for general purposes. Methods for determination of noise characteristics |
GOST 12.2.063 |
Occupational safety standards system. Industrial pipeline valves. General safety requirements |
GOST 12.2.085 |
Vessels working under pressure. Safety valves. Safety requirements |
GOST 12.2.086 |
"Occupational safety standards system. Positive-displacement hydraulic drives and lubricating systems. General safety requirements for mounting, testing and maintenance" |
GOST 12.2.101 |
Occupational safety standards system. Pheumatic drives. General design safety requirements |
GOST 12.2.110 |
Occupational safety standards systems. General-purpose stationary air piston compressors. Norms and methods for determination of noise characteristics |
GOST 12.3.001 |
"Occupational safety standards system. Pneumatic drives. General safety requirements for mounting, testing and maintenance" |
GOST 1208 |
Pressed bronze tubes. Specifications |
GOST 12586.0 |
Reinforced-concrete vibrohydropressed pressure pipes |
GOST 12586.1 |
Reinforced concrete vibrohydropressed pressure pipes. Design and dimensions |
GOST 12815 |
FLANGES FOR FITTINGS AND PIPELINES for Pnom from 0.1 to 20.0 Mpa (from 1 to 200 kgf/cm2)-Amendment 1: 03/1983; Amendment 2: 12/1983; Amendment 3: 12/1987; Amendment 4: 09/1989; Amendment 5: 04/1992 |
GOST 12816 |
"Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/cm2)/ General technical requirements" |
GOST 12821 |
"Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions" |
GOST 12893 |
Single-seated and double-seated control valves. General technical reguirements |
GOST 13547 |
"Butterfly wicket valves for Pnom to 2,5 MPa (25 kgf/cm2). General specifications" |
GOST 13548 |
Thin-walled tubes of nickel and nickel alloys. Specifications |
GOST 13663 |
Shaped steel tubes. Technical requirements |
GOST 13823 |
Hydraulic drives. Positive dispacement pumps and motors. Principal specifications |
GOST 14162 |
Steel tubes of small dimensions (capillary). Specifications |
GOST 14658 |
Positive-displacement pumps for hydraulic drives. Acceptance rules and methods of testing |
GOST 15040 |
Oxygen-free copper pipes. Specifications |
GOST 15608 |
Pneumatic piston cylinders. Specifications |
GOST 15860 |
"Steel welded cylinders for liquefied hydrocarbon gases at pressure up to 1,6 MPa. Specifications" |
GOST 16515 |
Positive-displacement hydraulic drives and lubricating systems. Filters and filter elements. General technical requirements |
GOST 16517 |
Hydraulic valves. General technical requirements |
GOST 16769 |
Hydraulic accumulators. General technical requirements |
GOST 16774 |
Copper tubes of rectangular and square section. Specifications |
GOST 17008 |
Khladon hermetic compressors. General specifications |
GOST 17217 |
Tubes of copper-nickel alloy MNZh5-1. Specifications |
GOST 17335 |
Positive-displacement pumps. Acceptance rules and test methods |
GOST 17411 |
Positive-displacement hydraulic drives. General technical requirements |
GOST 17437 |
Air filters separators. Specifications |
GOST 18460 |
Pneumatic drives. General technical requirements |
GOST 18475 |
Aluminium and aluminium alloy cold-rolled tubes. Specifications |
GOST 18517 |
Garage compressors. General specifications |
GOST 20245 |
Hydraulic valves. Acceptance and ethods of tests |
GOST 20719 |
Hydraulic motors. Acceptance and methods of tests |
GOST 20791 |
Electrically centrifugal glandless pumps. General specifications |
GOST 20900 |
Copper tubing for waveguides and brass right angle tubes |
GOST 21251 |
Pneumatic directional control valves spool type with 5 ports for pn=10 bar |
GOST 21324 |
Air check valves for pn= 10 bar |
GOST 21345 |
"Lifting-plug, ball and cylindrical cocks for Pnom to<=25 MPa (250 kgf/sq sm). General specifications" |
GOST 21646 |
Brass and copper tubes for heat exchanges. Specifications |
GOST 21729 |
Cold-deformed and hot-deformed structural carbon and alloyed steel tubes. Specifications |
GOST 21804 |
"Shut-off devices for cylinders with liquated gas of pressur 1,6 MPaGeneral specificatios" |
GOST 21805 |
"Pressure regulators for liquated gas of pressure 1,6 MPa. General specifications" |
GOST 21945 |
Seamless hot-rolled tubes from alloys based on titanium. Specifications |
GOST 22130 |
STEEL PIPELINE COMPONENTS MOVABLE SUPPORTS AND HANGERS SPECIFICATIONS |
GOST 22465 |
CENTRIFUGAL BOOSTER PUMPS BASIC PARAMETERS |
GOST 22502 |
Condensing units with hermetic refrigeration compressors for commercial refrigeration equipment. General specifications |
GOST 22786 |
Bimetalic seamless tubes for shipbuilding. Specifications |
GOST 22790 |
"Assembly units and pipeline parts for from 9, 81-98, 1 mpa (100- 1000 kgf/sm2). General specifications" |
GOST 22813 |
Pipeline Assembly Units and Parts REDUCING FLANGES DESIGNED for Pn over 10 to 100 ÃŒPÃ (over 100 to 1000 kgf/cm2) Design and Dimensions- Amendment 1: 12/1988 |
GOST 22976 |
Hydraulic and pneumatic power drives and lubricating systems. Acceptance |
GOST 23697 |
Welded straight-seam pipes of aluminium alloys. Specifications |
GOST 23866 |
"Single-seated, bouble seated and cage control valves. Basic parameters" |
GOST 24030 |
Corrosion-resistant steel seamless tubes for power engineering industry. Specifications |
GOST 24201 |
Connecting peces and accessories of glass pipings. Specifications |
GOST 24464 |
Feed pumps for nuclear power plant. General technical requirements |
GOST 24465 |
Condensate pumps for nuclear power plant. General technical requirements |
GOST 24656 |
CIRCULATION PUMPS FOR PRIMARY CIRCUITS OF POWER- GENERATING UNITS OF NUCLEAR POWER STATIONS WITH VVER REACTORS TYPES, KEY PARAMETERS AND GENERAL TECHNICAL REQUIREMENTS |
GOST 24890 |
Welded pipes out of titanium and titanium alloys. Specifications |
GOST 24950 |
Bent branches and elbows at line bends for transmission steel pipelines specifications |
GOST 25005 |
Refrigerating equipment. General requirements for pressure determination |
GOST 25277 |
Hydraulic power drives and lubricating systems. Filter elements. Acceptance and testing methods |
GOST 25476 |
Hudraulic fluid power and lubricating systems. Filters. Acceptance and methods of tests |
GOST 2624 |
Capillary copper and brass tubes. Specifications |
GOST 26287 |
Household electric pumps. General specifications |
GOST 26304 |
Pipe-line industrial valves supplied for export. General specifications |
GOST 26840 |
Ventilating electrical-and-hand units. Specifications |
GOST 27407 |
Piston opposite compressors. Acceptable levels and methods of determination of noise characteristics |
GOST 27851 |
Hydraulic drive volumetric pumps. Accelerated comparative life tests |
GOST 28338 |
Tube connections and fitting. Conventional passages. Series |
GOST 28343 |
Flanged steel ball valves. Technical requirements |
GOST 28413 |
Hydraulic drive volumetric pumps and motors. Accelerated tests for reliability |
GOST 28547 |
Refrigerating compressors of positive displacement type. Methods of testing |
GOST 28759.8 |
Metal gaskets of octangular section. Design and dimensions. Technical requirements |
GOST 28761 |
Hydraulic drives. Hydraulic semi-rotary actuators. General technical requirements |
GOST 28988 |
"Fluid power systems. Vibration characteristics, vibration tests" |
GOST 29014 |
Pneumatic drives. General test methods |
GOST 29015 |
Hydraulic drives. General test methods |
GOST 2936 |
Plane-oval seamless radiator tubes. Specifications |
GOST 3262 |
WATER AND GAS-SUPPLY STEEL PIPES SPECIFICATIONS- Incorporates Amendments 1-5 |
GOST 3845 |
METAL PIPES HYDRAULIC PRESSURE TEST METHOD |
GOST 4.411 |
PRODUCT QUALITY INDICATORS SYSTEM COMPLETE SETS OF SHAPED PARTS, ASSEMBLY UNITS AND PIPELINE BLOCKS (PIPE UNITS) OF HEAT POWER PLANT (HPP) AND ATOMIC POWER PLANT (APP) DESIGNED FOR PRESSURE OF 2.2 ÃŒPa AND HIGHER INDICATORS NOMENCLATURE |
GOST 494 |
Brass tubes. Specifications |
GOST 5005 |
Steel electrowelded cold-deformed pipes for cardan shafts. Specifications |
GOST 529 |
Radiator tubes. Technical requirements |
GOST 5525 |
Pig iron connecting parts manufactured by pouring into sand moulds for pipelines. Specifications |
GOST 5761 |
Qlobe valves phom 25 mpa (250 kgf/sq cm). General specifications |
GOST 5762 |
Gate vaives pnom 25 mpa (250 kgf/sq cm). General specifications |
GOST 5976 |
Radial fans for general use. General specifications |
GOST 6134 |
Rotodynamic pumps. Methods of testing |
GOST 617 |
Copper tubes. Specifications |
GOST 7402 |
Electric fans for domestic use. General specifications |
GOST 8339 |
Oil pressure units for hydraulic turbines. Specifications |
GOST 8638 |
Steel tubes. Range |
GOST 8639 |
Square steel pipes. Range |
GOST 8642 |
Oval steel tubes. Range |
GOST 8644 |
Flat-sided oval steel tubes. Range |
GOST 8645 |
Rectangular steel tubes. Range |
GOST 8646 |
Empty-ribbed steel tubes. Range of sizes |
GOST 8696 |
General-purpose electrically-welded spiral seam steel pipes. Specifications |
GOST 8732 |
Seamless hot-deformed steel pipes. Range of sizes |
GOST 8733 |
Seamles cold and warm deformed pipes. Specifications |
GOST 8734 |
Seamless steel tubes cold deformed. Range |
GOST 8943 |
Ductile iron and steel fittings with parallel thread for pipelines. Nomenclature |
GOST 8965 |
"Pipe steel connections with cylindrical thread for pipe-lines P=1,6 MPa. Specifications" |
GOST 9544 |
Pipeline gate valves-rates of gates sealibility |
GOST 9567 |
Precision steel tubes. Range |
GOST 9583 |
CAST-IRON PRESSURE PIPES MANUFACTURED BY METHODS OF CENTRIFUGAL AND SEMICONTINUOUS CASTING |
GOST 9725 |
Gentrifugal forced draft fans for boilers. General specifications |
GOST 9789 |
"Safety full-lifted flanged steel valve for P nom 1,6 and 4,0 MPa (16 and 40 kgf/cm2)" |
GOST 9940 |
SEAMLESS HOT-DEFORMED TUBES MADE FROM CORROSION- RESISTANT STEEL SPECIFICATIONS-Amendment 1:1987; Amendment 2:1988; Amendment 3:1988; Amendment 4:2000 |
GOST 9941 |
SEAMLESS COLD AND WARM-DEFORMED TUBES MADE FROM CORROSION-RESISTANT STEEL. SPECIFICATIONS |
GOST R 50650 |
Domestic siphons. Safety requirements and test methods |
GOST R 50651 |
Gas cylinders for domestic siphons. Safety requirements and test methods |
GOST R 50981 |
Hand-holding household pumps. General safety requirements |
GOST R 51164 |
STEEL MAIN PIPELINES GENERAL REQUIREMENTS FOR PROTECTION AGAINST CORROSION |