|
ISO 898-1 |
Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 1: Bolts, Screws and Studs-Third Edition |
|
ISO 2768-1 |
General Tolerances - Part 1: Tolerances for Linear and Angular Dimensions without Individual Tolerance Indications First Edition; (CEN EN 22768-1: 1993) |
|
ISO 4406 |
Hydraulic Fluid Power - Fluids - Method for Coding the Level of Contamination by Solid Particles-Second Edition |
|
ISO 5208 |
Industrial Valves - Pressure Testing of Valves Second Edition |
|
ISO 1940-1 CORR 1 |
Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances TECHNICAL CORRIGENDUM 1-Second Edition |
|
ISO 13709 |
Centrifugal pumps for petroleum, petrochemical and natural gas industries-First Edition |
|
ISO 4759-1 |
Tolerances for Fasteners - Part 1: Bolts, Screws Studs and Nuts - Product Grades A, B and C-Second Edition |
|
ISO 2631-1 |
Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole-Body Vibration - Part 1: General Requirements-Second Edition; Replaces ISO 2631-3:1985; Corrected and Reprinted 07/15/1997; Supersedes NZS ISO 2631.1: 1985 and NZS ISO 2631.3: 1985 |
|
ISO 2768-2 |
General Tolerances - Part 2: Geometrical Tolerances for Features without Individual Tolerance Indications-First Edition; CEN EN 22768-2: 1993 |
|
ISO 898-2 |
Mechanical Properties of Fasteners - Part 2: Nuts with Specified Proof Load Values - Coarse Thread-Second Edition |
|
ISO 10816-3 |
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 3: Industrial Machines with Nominal Power Above 15 kW and Nominal Speeds between 120 r/min and 15 000 r/min When Measured In Situ-First Edition |
|
ISO 4042 |
Fasteners - Electroplated Coatings-Second Edition |
|
ISO 724 |
ISO General-Purpose Metric Screw Threads - Basic Dimensions-Second Edition |
|
ISO 965-1 |
ISO General Purpose Metric Screw Threads - Tolerances - Part 1: Principles and Basic Data-Third Edition |
|
ISO GUIDE 51 |
Safety Aspects - Guidelines for Their Inclusion in Standards-Second Edition |
|
ISO 4014 |
Hexagon Head Bolts - Product Grades A and B-Third Edition |
|
ISO 261 |
ISO General Purpose Metric Screw Threads - General Plan-Second Edition |
|
ISO 286-1 |
ISO System of Limits and Fits - Part 1: Bases of Tolerances, Deviations and Fits-First Edition; CEN EN 20286-1: 1993; NZS/ISO 286.1: 1988 |
|
ISO GUIDE 2 |
Standardization and Related Activities - General Vocabulary-Eighth Edition |
|
ISO 4017 |
Hexagon Head Screws - Product Grades A and B-Third Edition |
|
ISO 10816-1 |
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 1: General Guidelines-First Edition; Replaces ISO 2372: 1974 and ISO 3945: 1985 |
|
ISO 262 |
ISO General Purpose Metric Screw Threads - Selected Sizes for Screws, Bolts and Nuts-Second Edition |
|
ISO 228-1 |
Pipe Threads Where Pressure-Tight Joints Are Not Made on the Threads - Part 1: Dimensions, Tolerances and Designation-Fourth Edition |
|
ISO 4762 |
Hexagon socket head cap screws-Fourth Edition |
|
ISO 8434-3 |
Metallic tube connections for fluid power and general use - Part 3: O-ring face seal connectors-Second Edition |
|
ISO GUIDE 73 |
Risk Management - Vocabulary - Guidelines for Use in Standards-First Edition |
|
ISO 3506-1 |
Mechanical Properties of Corrosion-Resistant Stainless-Steel Fasteners - Part 1: Bolts, Screws and Studs-First Edition |
|
ISO 1940-2 |
Mechanical Vibration - Balance Quality Requirements of Rigid Rotors - Part 2: Balance Errors-First Edition |
|
ISO 12151-1 |
Connections for Hydraulic Fluid Power and General Use - Hose Fittings - Part 1: Hose Fittings with ISO 8434-3 O-Ring Face Seal Ends-First Edition |
|
ISO 10816-6 |
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 6: Reciprocating Machines with Power Ratings Above 100 kW First Edition |
|
ISO 68-1 |
ISO General Purpose Screw Threads - Basic Profile Part 1: Metric Screw Threads-First Edition; This Standard Together with ISO 68-2 Cancels and Replaces ISO 68 |
|
ISO 1219-1 |
Fluid power systems and components Graphic symbols and circuit diagrams Part 1: Graphic symbols for conventional use and data-processing applications-Second Edition |
|
ISO 898-7 |
Mechanical Properties of Fasteners - Part 7: Torsional Test and Minimum Torques for Bolts and Screws with Nominal Diameters 1 mm to 10 mm-First Edition |
|
ISO 965-2 |
ISO General Purpose Metric Screw Threads - Tolerances - Part 2: Limits of Sizes for General Purpose External and Internal Screw Threads - Medium Quality-Third Edition |
|
ISO 2320 |
Prevailing Torque Type Steel Hexagon Nuts - Mechanical and Performance Properties-Third Edition; Technical Corrigendum 1: 09/01/2006 |
|
ISO 7005-1 |
Metallic Flanges - Part 1: Steel Flanges First Edition; (AS/NZS 4331.1: 1995) |
|
ISO 225 |
Fasteners - Bolts, Screws, Studs and Nuts - Symbols and Designations of Dimensions-Second Edition; Corrected and Reprinted 7/15/1992 |
|
ISO 7-1 CORR 1 |
Pipe Threads Where Pressure-Tight Joints Are Made on the Threads - Part 1: Dimensions, Tolerances and Designation-Third Edition |
|
ISO 8734 |
Parallel Pins, of Hardened Steel and Martensitic Stainless Steel (Dowel Pins) |
|
ISO 6149-1 |
Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal-Second Edition |
|
ISO 10816-4 |
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 4: Gas Turbine Driven Sets Excluding Aircraft Derivatives-First Edition |
|
ISO 3269 |
Fasteners - Acceptance Inspection-Third Edition |
|
ISO 898-6 |
Mechanical Properties of Fasteners - Part 6: Nuts with Specified Proof Load Values - Fine Pitch Thread-Second Edition |
|
ISO 4413 |
Hydraulic Fluid Power - General Rules Relating to Systems-Second Edition |
|
ISO 2041 |
Vibration and Shock - Vocabulary-Second Edition |
|
ISO 5199 |
Technical Specifications for Centrifugal Pumps - Class II-Second Editiom |
|
ISO 16047 |
Fasteners Torque/clamp force testing-First Edition |
|
ISO 6157-1 |
Fasteners - Surface Discontinuities - Part 1: Bolts, Screws and Studs for General Requirements First Edition |
|
ISO 1328-1 |
Cylindrical Gears - ISO System of Accuracy - Part 1: Definitions and Allowable Values of Deviations Relevant to Corresponding Flanks of Gear Teeth-First Edition; Corrected and Reprinted - 02/01/1997 |
|
ISO 8434-2 |
Metallic tube connections for fluid power and general use Part 2: 37° flared connectors-Second Edition |
|
ISO 8752 |
Spring-Type Straight Pins, Slotted, Heavy Duty-Second Edition |
|
ISO 10816-2 |
Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min-Second Edition; Corrigendum 1:08/01/2004 |
|
ISO 2631-2 |
Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole-Body Vibration - Part 2: Vibration in Buildings (1 Hz to 80 Hz)-Second Edition; Supersedes NZS ISO 2631.2: 1989 |
|
ISO 8678 |
Cup Head Square Neck Bolts with Small Head and Short Neck - Product Grade B First Edition |
|
ISO 4161 |
Hexagon Nuts with Flange - Coarse Thread-Second Edition |
|
ISO 6336-5 |
Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials-Second Edition |
|
ISO 10816-5 |
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 5: Machine Sets in Hydraulic Power Generating and Pumping Plants-First Edition |
|
ISO 21049 |
Pumps Shaft sealing systems for centrifugal and rotary pumps-First Edition |
|
ISO 4753 |
Fasteners - Ends of Parts with External ISO Metric Thread-Second Edition |
|
ISO 6157-3 |
Fasteners - Surface Discontinuities - Part 3: Bolts, Screws and Studs for Special Requirements First Edition |
|
ISO 4032 |
Hexagon Nuts, Style 1 - Product Grades A and B-Third Edition; Corrected and Reprinted: 03/01/2001 |
|
ISO 2341 |
Clevis Pins with Head-Second Edition |
|
ISO 4407 |
Hydraulic Fluid Power - Fluid Contamination - Determination of Particulate Contamination by the Counting Method Using an Optical Microscope-Second Edition |
|
ISO 7380 |
Hexagon Socket Button Head Screws-Third Edition |
|
ISO 6162-1 CORR 1 |
Hydraulic fluid power Flange connectors with split or one-piece flange clamps and metric or inch screws Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 16889 |
Hydraulic Fluid Power Filters - Multi-Pass Method for Evaluating Filtration Performance of a Filter Element-First Edition; Replaces ISO 4572: 1981; Supersedes (NFPA) T3.10.8.18 |
|
ISO 5752 |
Metal Valves for Use in Flanged Pipe Systems - Face-to-Face and Centre-to-Face Dimensions Second Edition |
|
ISO 11342 |
Mechanical Vibration - Methods and Criteria for the Mechanical Balancing of Flexible Rotors-Second Edition; Corrigendum 1: 06-01-2000 |
|
ISO 1219-2 |
Fluid Power Systems and Components - Graphic Symbols and Circuit Diagrams - Part 2: Circuit Diagrams-First Edition |
|
ISO 898-5 |
Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 5: Set Screws and Similar Threaded Fasteners Not under Tensile Stresses-Second Edition |
|
ISO 11171 |
Hydraulic Fluid Power - Calibration of Automatic Particle Counters for Liquids-First Edition; Corrigendum 1: 10/1/2001 |
|
ISO 1925 |
Mechanical Vibration - Balancing - Vocabulary-Fourth Edition |
|
ISO 4200 |
Plain End Steel Tubes, Welded and Seamless - General Tables of Dimensions and Masses per Unit Length-Fourth Edition; Replaces ISO 134: 1973 and ISO 336: 1976 |
|
ISO 5598 |
Fluid Power Systems and Components - Vocabulary First Edition |
|
ISO 281 |
Rolling bearings Dynamic load ratings and rating life-Second Edition |
|
ISO 6336-1 |
Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors-Second Edition |
|
ISO 10434 |
Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries-Second Edition |
|
ISO 1328-2 |
Cylindrical Gears - ISO System of Accuracy - Part 2: Definitions and Allowable Values of Deviations Relevant to Radial Composite Deviations and Runout Information-First Edition |
|
ISO 6149-3 |
Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends-Second Edition |
|
ISO 7045 |
Pan Head Screws with Type H or Type Z Cross Recess - Product Grade A-Second Edition |
|
ISO 2858 |
End-Suction Centrifugal Pumps (Rating 16 Bar) - Designation, Nominal Duty Point and Dimensions Second Edition; (CEN EN 22858: 1993) |
|
ISO 7089 |
Plain Washers - Normal Series - Product Grade A-Second Edition |
|
ISO 2631-4 |
Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole-Body Vibration - Part 4: Guidelines for the Evaluation of the Effects of Vibration and Rotational Motion on Passenger and Crew Comfort in Fixed-Guideway Transport Systems-First Edition |
|
ISO 888 |
Bolts, Screws and Studs - Nominal Lengths, and Thread Lengths for General Purpose Bolts-First Edition |
|
ISO 11500 |
Hydraulic Fluid Power - Determination of Particulate Contamination by Automatic Counting Using the Light Extinction Principle-First Edition; Corrigendum 1-1998 |
|
ISO 2631-5 |
Mechanical vibration and shock Evaluation of human exposure to whole-body vibration Part 5: Method for evaluation of vibration containing multiple shocks-First Edition |
|
ISO 3601-1 |
Fluid Power Systems - O-rings - Part 1: Inside Diameters, Cross-Sections, Tolerances and Size Identification Code-Third Edition |
|
ISO 4021 |
Hydraulic Fluid Power - Particulate Contamination Analysis - Extraction of Fluid Samples from Lines of an Operating System Second Edition |
|
ISO 7005-2 |
Metallic Flanges - Part 2: Cast Iron Flanges First Edition; (AS/NZS 4331.2: 1995) |
|
ISO 2954 |
Mechanical Vibration of Rotating and Reciprocating Machinery - Requirements for Instruments for Measuring Vibration Severity First Edition |
|
ISO 10380 |
Pipework - Corrugated Flexible Metallic Hose and Hose Assemblies-Second Edition |
|
ISO 15761 |
Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries-First Edition |
|
ISO 6149-2 |
Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends-Second Edition |
|
ISO 7919-1 |
Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria - Part 1: General Guidelines Second Edition |
|
ISO 7919-4 |
Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria - Part 4: Gas Turbine Sets First Edition |
|
ISO 7043 |
Prevailing Torque Type Hexagon Nuts with Flange (with Non-Metallic Insert) - Product Grades A and B-Second Edition |
|
ISO 10642 |
Hexagon socket countersunk head screws-Second Edition |
|
ISO 13373-1 |
Condition Monitoring and Diagnostics of Machines - Vibration Condition Monitoring - Part 1: General Procedures-First Edition |
|
ISO 8839 |
Mechanical Properties of Fasteners - Bolts, Screws, Studs and Nuts Made of Non-Ferrous Metals-First Edition |
|
ISO 13691 |
Petroleum and Natural Gas Industries - High-Speed Special-Purpose Gear Units-First Edition |
|
ISO 10664 |
Hexalobular internal driving feature for bolts and screws-Second Edition |
|
ISO 3274 |
Geometrical Products Specifications (GPS) - Surface Texture: Profile Method - Nominal Characteristics of Contact (Stylus) Instruments-Second Edition; Technical Corrigendum 1-1998 |
|
ISO 9906 |
Rotodynamic Pumps - Hydraulic Performance Acceptance Tests - Grades 1 and 2-First Edition |
|
ISO 3304 |
Plain End Seamless Precision Steel Tubes - Technical Conditions for Delivery Second Edition |
|
ISO 965-3 |
ISO General Purpose Metric Screw Threads - Tolerances - Part 3: Deviations for Constructional Screw Threads-Third Edition |
|
ISO 17292 |
Metal ball valves for petroleum, petrochemical and allied industries-First Edition |
|
ISO 6336-3 |
Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength-Second Edition |
|
ISO 4162 |
Hexagon Flange Bolts - Small Series First Edition |
|
ISO 3506-2 |
Mechanical Properties of Corrosion-Resistant Stainless-Steel Fasteners - Part 2: Nuts-First Edition |
|
ISO 6336-2 |
Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting)-Second Edition |
|
ISO 11926-1 |
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 725 Threads and O-Ring Sealing - Part 1: Ports with O-Ring Seal in Truncated Housing First Edition |
|
ISO 15071 |
Hexagonal Bolts with Flange - Small Series - Product Grade A-First Edition; Technical Corrigendum 1: 12/15/2006 |
|
ISO 18436-1 CORR 1 |
Condition monitoring and diagnostics of machines Requirements for training and certification of personnel Part 1: Requirements for certifying bodies and the certification process TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO GUIDE 50 |
Safety Aspects - Guidelines for Child Safety-Second Edition |
|
ISO 10683 |
Fasteners - Non-Electrolytically Applied Zinc Flake Coatings-First Edition; JIS B 1046:2005 |
|
ISO 1502 |
ISO General-Purpose Metric Screw Threads - Gauges and Gauging-Second Edition |
|
ISO 15848-1 |
Industrial valves Measurement, test and qualification procedures for fugitive emissions Part 1: Classification system and qualification procedures for type testing of valves-First Edition |
|
ISO 7040 |
Prevailing Torque Type Hexagon Nuts (with Non-Metallic Insert), Style 1 - Property Classes 5, 8 and 10-Second Edition |
|
ISO 53 |
Cylindrical Gears for General and Heavy Engineering - Standard Basic Rack Tooth Profile-Second Edition |
|
ISO 5593 AMD 1 |
Rolling bearings Vocabulary AMENDMENT 1-First Edition |
|
ISO 2415 |
Forged shackles for general lifting purposes Dee shackles and bow shackles-Third Edition |
|
ISO 4759-3 |
Tolerances for Fasteners - Part 3: Plain Washers for Bolts, Screws and Nuts - Product Grades A and C-Third Edition |
|
ISO 7379 |
Hexagon Socket Head Shoulder Screws First Edition |
|
ISO 965-4 |
ISO General Purpose Metric Screw Threads - Tolerances - Part 4: Limits of Sizes for Hot-Dip Galvanized External Screw Threads to Mate with Internal Screw Threads Tapped with Tolerance Position H or G After Galvanizing-First Edition |
|
ISO GUIDE 72 |
Guidelines for the Justification and Development of Management System Standards-First Edition |
|
ISO 14104 |
Gears - Surface Temper Etch Inspection After Grinding-First Edition; Corrected and Reprinted 02-15-1997 |
|
ISO 2408 |
Steel wire ropes for general purposes Minimum requirements-Third Edition |
|
ISO 7268 |
Pipe Components - Definition of Nominal Pressure-First Edition; Amendment 1: 1984 |
|
ISO GUIDE 21-1 |
Regional or national adoption of International Standards and other International Deliverables Part 1: Adoption of International Standards-First edition; ISO/IEC Guide 21-1, Together with ISO/IEC Guide 21-2 replaces ISO/IEC Guide 21:1999 |
|
ISO 273 |
Fasteners - Clearance Holes for Bolts and Screws-First Edition; Amendment Slip-1979; NZS/ISO 273: 1979 |
|
ISO 7042 |
Prevailing Torque Type All-Metal Hexagon Nuts, Style 2 - Property Classes 5, 8, 10 and 12-Second Edition |
|
ISO 7092 |
Plain Washers - Small Series - Product Grade A-Second Edition |
|
ISO 6149-4 |
Connections for fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs-First Edition |
|
ISO 7085 |
Mechanical and Performance Requirements of Case Hardened and Tempered Metric Thread Rolling Screws-First Edition |
|
ISO 2338 |
Parallel Pins, of Unhardened Steel and Austenitic Stainless Steel-Second Edition |
|
ISO 2702 |
Heat-Treated Steel Tapping Screws - Mechanical Properties-Second Edition; CEN EN ISO 2702: 1994; AS/NZS 4412: 1996 |
|
ISO 3310-1 |
Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth-Fourth Edition; Technical Corrigendum 1:9/1/2004 |
|
ISO 7044 |
Prevailing Torque Type All-Metal Hexagon Nuts with Flange - Product Grades A and B-Second Edition |
|
ISO 7919-5 |
Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 5: Machine sets in hydraulic power generating and pumping plants-Second Edition |
|
ISO 8748 |
Spring-type straight pins Coiled, heavy duty-Third edition |
|
ISO 965-5 |
ISO General Purpose Metric Screw Threads - Tolerances - Part 5: Limit of Sizes for Internal Screw Threads to Mate with Hot-Dip Galvanized External Screw Threads with Maximum Size of Tolerance Position h Before Galvanizing-First Edition |
|
ISO 13372 |
Condition monitoring and diagnostics of machines Vocabulary-First Edition |
|
ISO 18436-2 |
Condition monitoring and diagnostics of machines - Requirements for Training and Certification of Personnel - Part 2: Vibration Condition Monitoring and Diagnostics-First Edition |
|
ISO 5198 |
Centrifugal, Mixed Flow and Axial Pumps - Code for Hydraulic Performance Tests - Precision Class First Edition |
|
ISO 6162-2 |
Hydraulic fluid power Flange connectors with split or one-piece flange clamps and metric or inch screws Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51-First Edition |
|
ISO TR 10064-1 |
Cylindrical gears Code of inspection practice Part 1: Inspection of corresponding flanks of gear teeth-First Edition; Corrigendum 1: 08/01/2006 |
|
ISO 10771-1 |
Hydraulic Fluid Power - Fatigue Pressure Testing of Metal Pressure-Containing Envelopes - Part 1: Test Methods-First Edition |
|
ISO 1234 |
Split Pins-Second Edition |
|
ISO 3722 |
Hydraulic Fluid Power - Fluid Sample Containers - Qualifying and Controlling Cleaning Methods First Edition-Supersedes NFPA B93.20M |
|
ISO 4405 |
Hydraulic Fluid Power - Fluid Contamination - Determination of Particulate Contamination by the Gravimetric Method First Edition-Supersedes (NFPA) T2.9.14 |
|
ISO 7241-1 |
Hydraulic Fluid Power - Quick-Action Couplings - Part 1: Dimensions and Requirements First Edition |
|
ISO 7919-3 |
Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria - Part 3: Coupled Industrial Machines First Edition |
|
ISO 11562 |
Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Metrological Characteristics of Phase Correct Filters-First Edition; Technical Corrigendum 1-1998 |
|
ISO 11926-2 |
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 725 Threads and O-Ring Sealing - Part 2: Heavy-Duty (S Series) Stud Ends First Edition (SAE J 1926/2) |
|
ISO 8041 CORR 1 |
Human response to vibration Measuring instrumentation, TECHNICAL CORRIGENDUM 1-Second edition |
|
ISO 68-2 |
ISO General Purpose Screw Threads - Basic Profile Part 2: Inch Screw Threads-First Edition; This Standard Together with ISO 68-1 Cancels and Replaces ISO 68 |
|
ISO TR 10064-2 |
Cylindrical gears Code of inspection practice Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash-First Edition; Technical Corrigendum 1: 04-15-2001; Technical Corrigendum 2: 08/01/2006 |
|
ISO 8434-1 |
Metallic tube connections for fluid power and general use Part 1: 24° cone connectors-Second Edition |
|
ISO 1478 |
Tapping Screws Thread-Second Edition |
|
ISO 16028 |
Hydraulic Fluid Power - Flush-Face Type, Quick-action Couplings for Use at Pressures of 20 MPa (200 Bar) to 31, 5 MPa (315 Bar) - Specifications-First Edition; Amendment 1: 01/15/2006 |
|
ISO 1609 |
Vacuum Technology - Flange Dimensions-First Edition |
|
ISO 2340 |
Clevis Pins without Head-Second Edition |
|
ISO 4866 |
Mechanical Vibration and Shock - Vibration of Buildings - Guidelines for the Measurement of Vibrations and Evaluation of Their Effects on Buildings-First Edition; Amendment 1-1994; PNS 1092:1992; Amendment 2-1996 |
|
ISO 5349-1 |
Mechanical Vibration - Measurement and Evaluation of Human Exposure to Hand-Transmitted Vibration - Part 1: General Requirements-First Edition |
|
ISO GUIDE 63 |
Guide to the Development and Inclusion of Safety Aspects in International Standards for Medical Devices-First Edition |
|
ISO 15848-2 |
Industrial valves Measurement, test and qualification procedures for fugitive emissions Part 2: Production acceptance test of valves-First Edition |
|
ISO 2531 |
Ductile Iron Pipes, Fittings, Accessories and Their Joints for Water or Gas Applications-Fifth Edition |
|
ISO 5211 |
Industrial Valves - Part-Turn Actuator Attachment-First Edition; Cancels and Replaces ISO 5211-1:1977, ISO 5211-2:1979 and ISO 5211-3:1982 |
|
ISO 7093-1 |
Plain Washers - Large Series - Part 1: Product Grade A-First Edition; Corrected and Reprinted 02/01/2001 |
|
ISO 7412 |
Hexagon Bolts for High-Strength Structural Bolting with Large Width Across Flats (Short Thread Length) - Product Grade C - Property Classes 8.8 and 10.9 First Edition |
|
ISO 17359 |
Condition monitoring and diagnostics of machines General guidelines-First Edition |
|
ISO 3506-3 |
Mechanical Properties of Corrosion-Resistant Stainless-Steel Fasteners - Part 3: Set Screws and Similar Fasteners Not Under Tensile Stress-First Edition |
|
ISO 3506-4 |
Mechanical Properties of Corrosion-Resistant Stainless-Steel Fasteners - Part 4: Tapping Screws-First Edition |
|
ISO 4019 |
Structural Steels - Cold-Formed, Welded, Structural Hollow Sections - Dimensions and Sectional Properties-Second Edition |
|
ISO 18413 |
Hydraulic Fluid Power - Cleanliness of Parts and Components - Inspection Document and Principles Related to Contaminant Collection, Analysis and Data Reporting-First Edition |
|
ISO 3547-1 |
Plain bearings Wrapped bushes Part 1: Dimensions-Second Edition |
|
ISO 355 |
Rolling bearings Tapered roller bearings Boundary dimensions and series designations-Second Edition |
|
ISO 5753 |
Rolling Bearings - Radial Internal Clearance Second Edition |
|
ISO 7005-3 |
Metallic Flanges - Part 3: Copper Alloy and Composite Flanges First Edition; (AS/NZS 4331.3: 1995) |
|
ISO 7919-2 |
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Rotating Shafts - Part 2: Land-Based Steam Turbines and Generators in Excess of 50 MW with Normal Operating Speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min-Second Edition |
|
ISO GUIDE 71 |
Guidelines for Standards Developers to Address the Needs of Older Persons and Persons with Disabilities-First Edition |
|
ISO IWA 4 |
Quality management systems Guidelines for the application of ISO 9001:2000 in local government |
|
ISO 4035 |
Hexagon Thin Nuts (Chamfered) - Product Grades A and B-Third Edition |
|
ISO 6708 |
Pipework Components - Definition and Selection of DN (Nominal Size) Second Edition; (CEN EN ISO 6708: 1995) |
|
ISO 701 |
International Gear Notation - Symbols for Geometrical Data-Second Edition |
|
ISO 10497 |
Testing of Valves - Fire Type-Testing Requirements-Second Edition |
|
ISO 13374-1 |
Condition Monitoring and Diagnostics of Machines - Data Processing, Communication and Presentation - Part 1: General Guidelines-First Edition |
|
ISO 54 |
Cylindrical Gears for General Engineering and for Heavy Engineering - Modules-Second Edition |
|
ISO 13337 |
Spring-Type Straight Pins - Slotted, Light Duty-First Edition |
|
ISO 3800 |
Threaded Fasteners - Axial Load Fatigue Testing - Test Methods and Evaluation of Results First Edition; |
|
ISO 7-2 |
Pipe Threads Where Pressure-Tight Joints Are Made on the Threads - Part 2: Verification by Means of Limit Gauges-Second Edition |
|
ISO 12151-3 |
Connections for Hydraulic Fluid Power and General Use - Hose Fittings - Part 3: Hose Fittings with ISO 6162 Flange Ends-First Edition |
|
ISO 13379 |
Condition monitoring and diagnostics of machines General guidelines on data interpretation and diagnostics techniques-First Edition |
|
ISO 13710 |
Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps-First Edition |
|
ISO 18431-4 |
Mechanical vibration and shock Signal processing Part 4: Shock-response spectrum analysis-First Edition |
|
ISO 2941 |
Hydraulic Fluid Power - Filter Elements - Verification of Collapse/Burst Resistance First Edition |
|
ISO 2953 |
Machanical Vibration - Balancing Machines - Description and Evaluation-Third Edition |
|
ISO 3547-4 |
Plain Bearings - Wrapped Bushes - Part 4: Materials-Second Edition |
|
ISO 3601-3 |
Fluid power systems O-rings Part 3: Quality acceptance criteria-Second Edition |
|
ISO 4412-1 |
Hydraulic Fluid Power - Test Code for Determination of Airborne Noise Levels - Part 1: Pumps Second Edition-Supersedes (NFPA) B93.71M |
|
ISO 492 |
Rolling Bearings - Radial Bearings - Tolerances-Fourth Edition |
|
ISO 5805 |
Mechanical Vibration and Shock - Human Exposure - Vocabulary-Second Edition |
|
ISO 8676 |
Hexagon Head Screws with Metric Fine Pitch Thread - Product Grades A and B-Second Edition |
|
ISO 8792 |
Wire Ropes Slings - Safety Criteria and Inspection Procedures for Use First Edition |
|
ISO 7241-2 |
Hydraulic Fluid Power - Quick-Action Couplings - Part 2: Test Methods-Second Edition |
|
ISO 4397 |
Fluid Power Systems and Components - Connectors and Associated Components - Nominal Outside Diameters of Tubes and Nominal Inside Diameters of Hoses Second Edition |
|
ISO 565 |
Test Sieves - Metal Wire Cloth, Perforated Metal Plate and Electroformed Sheet - Nominal Sizes of Openings-Third Edition |
|
ISO 4437 |
Buried polyethylene (PE) pipes for the supply of gaseous fuels Metric series Specifications-Third Edition |
|
ISO 6157-2 |
Fasteners - Surface Discontinuities - Part 2: Nuts First Edition |
|
ISO TS 13725 |
Hydraulic fluid power Cylinders Method for determining the buckling load-First Edition |
|
ISO 12162 |
Thermoplastics Materials for Pipes and Fittings for Pressure Applications - Classification and Designation - Overall Service (Design) Coefficient First Edition (CEN EN ISO 12162: 1995) |
|
ISO 1891 |
Bolts, Screws, Nuts and Accessories - Terminology and Nomenclature-First Edition; Amendment Slip-1980 |
|
ISO 4029 |
Hexagon socket set screws with cup point-Third Edition |
|
ISO 4383 |
Plain Bearings - Multilayer Materials for Thin-Walled Plain Bearings-Third Edition |
|
ISO 4414 |
Pneumatic Fluid Power - General Rules Relating to Systems-Second Edition |
|
ISO 5636-5 |
Paper and board Determination of air permeance and air resistance (medium range) Part 5: Gurley method-Second Edition |
|
ISO 11926-3 |
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 725 Threads and O-Ring Sealing - Part 3: Light-Duty (L Series) Stud Ends First Edition |
|
ISO 15875-1 AMD 1 |
Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General AMENDMENT 1-First Edition |
|
ISO 5408 |
Cylindrical Screw Threads - Vocabulary First Edition |
|
ISO 6954 |
Mechanical Vibration - Guidelines for the Measurement, Reporting and Evaluation of Vibration with Regard to Habitability on Passenger and Merchant Ships-Second Edition |
|
ISO 7053 |
Hexagon Washer Head Tapping Screws First Edition; (AS/NZS 4409: 1996) |
|
ISO 7626-2 |
Vibration and Shock - Experimental Determination of Mechanical Mobility - Part 2: Measurements Using Single-Point Translation Excitation with an Attached Vibration Exciter First Edition |
|
ISO 887 |
Plain Washers for Metric Bolts, Screws and Nuts for General Purposes - General Plan-Second Edition; Corrigendum 1: 01/15/2006 |
|
ISO TR 10064-4 |
Cylindrical gears Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern checking-First Edition; Technical Corrigendum 1: 08/01/2006 |
|
ISO 10817-1 |
Rotating Shaft Vibration Measuring Systems - Part 1: Relative and Absolute Sensing of Radial Vibration-First Edition |
|
ISO 15 |
Rolling Bearings - Radial Bearings - Boundary Dimensions, General Plan-Second Edition |
|
ISO 272 |
Fasteners - Hexagon Products - Widths Across Flats-Second Edition |
|
ISO 7626-5 |
Vibration and Shock - Experimental Determination of Mechanical Mobility - Part 5: Measurements Using Impact Excitation with an Exciter Which Is Not Attached to the Structure First Edition |
|
ISO 8991 |
Designation System for Fasteners First Edition |
|
ISO GUIDE 69 |
Harmonized Stage Code System (Edition 2) - Principles and Guidelines for Use-First Edition |
|
ISO IWA 2 |
Quality management systems Guidelines for the application of ISO 9001:2000 in education |
|
ISO 10326-1 AMD 1 |
Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements-First Edition |
|
ISO 10763 |
Hydraulic Fluid Power - Plain-End, Seamless and Welded Precision Steel Tubes - Dimensions and Nominal Working Pressures First Edition |
|
ISO 13373-2 |
Condition monitoring and diagnostics of machines Vibration condition monitoring Part 2: Processing, analysis and presentation of vibration data-First Edition |
|
ISO 3601-5 |
Fluid Power Systems - O-Rings - Part 5: Suitability of Elastomeric Materials for Industrial Applications-First Edition |
|
ISO 5348 |
Mechanical Vibration and Shock - Mechanical Mounting of Accelerometers-Second Edition |
|
ISO 6605 |
Hydraulic fluid power Hoses and hose assemblies Test methods-Second Edition |
|
ISO 8579-2 |
Acceptance Code for Gears - Part 2: Determination of Mechanical Vibrations of Gear Units During Acceptance Testing First Edition |
|
ISO 8821 |
Mechanical Vibration - Balancing - Shaft and Fitment Key Convention First Edition; (NZS/ISO 8821: 1989) |
|
ISO 9080 |
Plastics Piping and Ducting Systems - Determination of the Long-Term Hydrostatic Strength of Thermoplastics Materials in Pipe Form by Extrapolation-First Edition; Replaces ISO TR 9080 |
|
ISO 10360-4 |
Geometrical Product Specifications (GPS) - Acceptance and Reverification Test for Coordinate Measuring Machines (CMM) - Part 4: CMMs Used in Scanning Measuring Mode-First Edition; Corrigendum 1: 11/15/2002 |
|
ISO 14635-1 |
Gears - FZG Test Procedures - Part 1: FZG Test Method A/8, 3/90 for Relative Scuffing Load-Carrying Capacity of Oils-First Edition |
|
ISO 17893 |
Steel wire ropes Vocabulary, designation and classification-First Edition |
|
ISO 228-2 |
Pipe Threads Where Pressure-Tight Joints Are Not Made on the Threads - Part 2: Verification by Means of Limit Gauges-Second Edition |
|
ISO 2795 |
Plain Bearings - Sintered Bushes - Dimensions and Tolerances Fourth Edition; (NZS/ISO 2795: 1991) |
|
ISO 2902 |
ISO Metric Trapezoidal Screw Threads - General Plan First Edition |
|
ISO 4028 |
Hexagon Socket Set Screws with Dog Point-Third Edition |
|
ISO 4757 |
Cross Recesses for Screws-First Edition |
|
ISO 7091 |
Plain Washers - Normal Series - Product Grade C-Second Edition |
|
ISO 7094 |
Plain Washers - Extra Large Series - Product Grade C-Second Edition; Technical Corrigendum 1 12/01/2000 |
|
ISO 9974-3 |
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal- to-Metal Sealing - Part 3: Stud Ends with Metal-to-Metal Sealing (Type B) First Edition |
|
ISO R1938 |
ISO System of Limits and Fits Part II: Inspection of Plain Workpieces-First Edition |
|
ISO 10814 |
Mechanical Vibration - Susceptibility and Sensitivity of Machines to Unbalance First Edition |
|
ISO 5864 |
ISO Inch Screw Threads - Allowances and Tolerances Second Edition |
|
ISO 6194-1 |
Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 1: Nominal dimensions and tolerances-Second Edition |
|
ISO 7049 |
Cross Recessed Pan Head Tapping Screws-First Edition |
|
ISO 7671 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Polypropylene (PP)-Second Edition |
|
ISO GUIDE 21-2 |
Regional or national adoption of International Standards and other International Deliverables Part 2: Adoption of International Deliverables other than International Standards-First Edition; Together with ISO/IEC Guide 21-1 replaces ISO/IEC Guide 21:1999 |
|
ISO TR 10828 |
Worms Gears - Geometry of Worm Profiles-First Edition; Technical Corrigendum 1: 11/01/1998 |
|
ISO 10663 |
Hexagon Nuts with Flange - Fine Pitch Thread-First Edition |
|
ISO 1132-1 |
Rolling Bearings - Tolerances Part 1: Terms and Definitions-First Edition; Replaces ISO 1132 |
|
ISO 12151-2 |
Connections for hydraulic fluid power and general use Hose fittings Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings-First Edition |
|
ISO 3719 |
Mechanical Vibration - Symbols for Balancing Machines and Associated Instrumentation Second Edition |
|
ISO 7093-2 |
Plain Washers - Large Series - Part 2: Product Grade C-First Edition |
|
ISO 76 |
Rolling Bearings - Static Load Ratings-Third Edition |
|
ISO 9085 |
Calculation of Load Capacity of Spur and Helical Gears - Application for Industrial Gears-First Edition |
|
ISO 9276-1 |
Representation of Results of Particle Size Analysis - Part 1: Graphical Representation-Second Edition; Corrigendum 1: 2-1-2004 |
|
ISO 9908 |
Technical Specifications for Centrifugal Pumps - Class III First Edition |
|
ISO 9974-1 |
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal- to-Metal Sealing - Part 1: Threaded Ports First Edition |
|
ISO 9974-2 |
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal- to-Metal Sealing - Part 2: Stud Ends with Elastomeric Sealing (Type E) First Edition |
|
ISO 1580 |
Slotted Pan Head Screws - Product Grade A-Second Edition; CEN EN ISO 1580: 1994 |
|
ISO 1829 |
Selection of Tolerance Zones for General Purposes First Edition |
|
ISO 3662 |
Hydraulic Fluid Power - Pumps and Motors - Geometric Displacements First Edition |
|
ISO 5209 |
General Purpose Industrial Valves - Marking First Edition |
|
ISO 7483 |
Dimensions of Gaskets for Use with Flanges to ISO 7005-First Edition; Corrigendum 1: 1995 |
|
ISO 8608 |
Mechanical Vibration - Road Surface Profiles - Reporting of Measured Data First Edition |
|
ISO 1122-2 |
Vocabulary of Gear Terms - Part 2: Definitions Related to Worm Gear Geometry-First Edition |
|
ISO 13380 |
Condition Monitoring and Diagnostics of Machines - General Guidelines on Using Performance Parameters-First Edition |
|
ISO 13381-1 |
Condition monitoring and diagnostics of machines Prognostics Part 1: General guidelines-First Edition |
|
ISO 1479 |
Hexagon Head Tapping Screws-First Edition; CEN EN ISO 1479: 1994; AS/NZS 4402: 1996 |
|
ISO 15072 |
Hexagon Bolts with Flange with Metric Fine Pitch Thread - Small Series - Product Grade A-First Edition; Technical Corrigendum 1; 12/15/2006 |
|
ISO 16330 |
Reciprocating positive displacement pumps and pump units Technical requirements-First Edition |
|
ISO 19879 CORR 1 |
Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 2901 |
ISO Metric Trapezoidal Screw Threads - Basic Profile and Maximum Material Profiles Second Edition |
|
ISO 3545-1 |
Steel Tubes and Fittings - Symbols for Use in Specifications - Part 1: Tubes and Tubular Accessories with Circular Cross-Section First Edition |
|
ISO 5349-2 |
Mechanical Vibration - Measurement and Evaluation of Human Exposure to Hand-Transmitted Vibration - Part 2: Practical Guidance for Measurement at the Workplace-First Edition |
|
ISO 8749 |
Pins and Grooved Pins - Shear Test-First Edition |
|
ISO 2009 |
Slotted Countersunk Flat Head Screws (Common Head Style) - Product Grade A-Third Edition; CEN EN ISO 2009: 1994 |
|
ISO 2938 |
Hollow Steel Bars for Machining First Edition; (Erratum-1979) |
|
ISO 3968 |
Hydraulic Fluid Power - Filters - Evaluation of Differential Pressure Versus Flow Characteristics-Second Edition; Technical Corrigendum 1: 9/01/2002; Supersedes (NFPA) B93.80M |
|
ISO 4015 |
Hexagon Head Bolts - Product Grade B - Reduced Shank (Shank Diameter is Approximately Equal to Pitch Diameter) First Edition |
|
ISO 4755 |
Fasteners - Thread Undercuts for External Metric ISO Threads First Edition |
|
ISO 5347-11 |
Methods for the Calibration of Vibration and Shock Pick-Ups - Part 11: Testing of Transverse Vibration Sensitivity First Edition |
|
ISO 6524 |
Plain Bearings - Thin-Walled Half-Bearings - Checking of Peripheral Length Second Edition |
|
ISO 81400-4 CORR 1 |
Wind turbines Part 4: Design and specification of gearboxes TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO TS 16431 |
Hydraulic Fluid Power - Assembled Systems - Verification of Cleanliness-First Edition |
|
ISO 10300-1 |
Calculation of Load Capacity of Bevel Gears - Part 1: Introduction and General Influence Factors-First Edition |
|
ISO 10300-2 |
Calculation of Load Capacity of Bevel Gears - Part 2: Calculation of Surface Durability-Corrected Version; 5/15/2003 |
|
ISO 10631 |
Metallic Butterfly Valves for General Purposes First Edition |
|
ISO 13320-1 |
Particle Size Analysis - Laser Diffraction Methods - Part 1: General Principles-First Edition |