|
ISO 527-1 |
Plastics - Determination of tensile properties - Part 1: General principles-First Edition; Corrigendum 1-1994; Amendment 1: 09-01-2005 |
|
ISO 179-1 |
Plastics - Determination of Charpy Impact Properties - Part 1: Non-Instrumented Impact Test-First Edition; Amendment 1: 7/15/2005 |
|
ISO 178 |
Plastics - Determination of Flexural Properties-Fourth Edition; Amendment 1: 02/15/2004 |
|
ISO 527-2 |
Plastics - Determination of Tensile Properties - Part 2: Test Conditions for Moulding and Extrusion Plastics-First Edition |
|
ISO 291 |
Plastics Standard atmospheres for conditioning and testing-Third Edition |
|
ISO 180 |
Plastics - Determination of Izod Impact Strength-Third Edition; Amendment 1: 12/1/2006 |
|
ISO 179-2 |
Plastics - Determination of Charpy Impact Properties - Part 2: Instrumented Impact Test-First Edition; Technical Corrigendum 1: 11-15-1998 |
|
ISO 11469 |
Plastics - Generic Identification and Marking of Plastic Products-Second Edition |
|
ISO 75-1 |
Plastics - Determination of Temperature of Deflection under Load - Part 1: General Test Method-Second Edition |
|
ISO 1043-1 |
Plastics - Symbols and Abbreviated Terms - Part 1: Basic Polymers and Their Special Characteristics-Third Edition |
|
ISO 868 |
Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness)-Third Edition |
|
ISO 1133 |
Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics-Fourth edition |
|
ISO 48 |
Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)-Fourth Edition |
|
ISO 37 CORR 1 |
Rubber, vulcanized or thermoplastic Determination of tensile stress-strain properties TECHNICAL CORRIGENDUM 1-Fourth Edition |
|
ISO 527-3 |
Plastics - Determination of Tensile Properties - Part 3: Test Conditions for Films and Sheets-First Edition; Technical Corrigendum 1:06-15-1998; Technical Corrigendum 2:04-15-2001 |
|
ISO 4892-2 |
Plastics Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps-Second Edition |
|
ISO 4892-1 |
Plastics - Methods of Exposure to Laboratory Light Sources - Part 1: General Guidance-Second Edition |
|
ISO 527-5 |
Plastics - Determination of Tensile Properties - Part 5: Test Conditions for Unidirectional Fibre-Reinforced Plastic Composites-First Edition; Replaces 3268:1978 |
|
ISO 294-3 AMD 1 |
Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates AMENDMENT 1-Second Edition |
|
ISO 527-4 |
PLastics - Determination of Tensile Properties - Part 4: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites-First Edition; Replaces ISO 3268:1978 |
|
ISO 1817 |
Rubber, Vulcanized - Determination of the Effect of Liquids-Fourth Edition; Corrected Version 2/15/2006 |
|
ISO 188 |
Rubber, Vulcanized or Thermoplastic - Accelerated Ageing and Heat Resistance Tests-Fourth Edition |
|
ISO 11357-2 |
Plastics - Differential Scanning Calorimetry (DSC) - Part 2: Determination of Glass Transition Temperature-First Edition |
|
ISO 294-4 CORR 1 |
Plastics Injection moulding of test specimens of thermoplastic materials Part 4: Determination of moulding shrinkage TECHNICAL CORRIGENDUM 1-Second Edition |
|
ISO 4892-3 |
Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps-Second Edition |
|
ISO 11357-1 |
Plastics - Differential Scanning Calorimetry (DSC) - Part 1: General Principles-First Edition |
|
ISO 1183-1 |
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method-First Edition; Together with 1183-2 and 1183-3 replaces 1183:1987 |
|
ISO 1043-2 |
Plastics - Symbols and Abbreviated Terms - Part 2: Fillers and Reinforcing Materials-Second Edition |
|
ISO 294-1 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens-First Edition; Supersedes ISO 294: 1995; Amendment 1: 01-15-2001; Amendment 2: 09-01-2005 |
|
ISO 34-1 |
Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces-Second Edition |
|
ISO 62 |
Plastics Determination of water absorption-Third Edition |
|
ISO 75-2 |
Plastics - Determination of Temperature of Deflection under Load - Part 2: Plastics and Ebonite-Second Edition |
|
ISO 1629 AMD 1 |
Rubber and Latices - Nomenclature AMENDMENT 1-Third Edition |
|
ISO 14937 |
Sterilization of Health Care Products - General Requirements for Characterization of a Sterilizing Agent and the Development, Validation and Routine Control of a Sterilization Process for Medical Devices-First Edition; Technical Corrigendum 1: 6/01/2003 |
|
ISO 306 |
Plastics Thermoplastic materials Determination of Vicat softening temperature (VST)-Fourth Edition |
|
ISO 3302-1 |
Rubber - Tolerances for Products - Part 1: Dimensional Tolerances-First Edition; Cancels and Replaces 3302: 1990; Amendment 1:06-01-2001 |
|
ISO 4892-4 CORR 1 |
Plastics Methods of exposure to laboratory light sources Part 4: Open-flame carbon-arc lamps TECHNICAL CORRIGENDUM 1-Second Edition |
|
ISO 3451-1 |
Plastics - Determination of Ash - Part 1: General Methods-Third Edition |
|
ISO 11357-3 |
Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization-First Edition; Amendment 1: 07/2005 |
|
ISO 4582 |
Plastics - Determination of Changes in Colour and Variations in Properties After Exposure to Daylight Under Glass, Natural Weathering or Laboratory Light Sources-Second Edition |
|
ISO 13586 |
Plastics Determination of fracture toughness (GIC and KIC) Linear elastic fracture mechanics (LEFM) approach AMENDMENT 1: Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres-First Edition; Amendment 1:6/1/2003 |
|
ISO 1431-1 |
Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing-Fourth Edition; Replaces ISO 1431-2: 1/15/1994 |
|
ISO 2577 |
Plastics Thermosetting moulding materials Determination of shrinkage-Third Edition |
|
ISO 10282 CORR 1 |
Single-use sterile rubber surgical gloves Specification TECHNICAL CORRIGENDUM 1-Second Edition |
|
ISO 1043-4 |
Plastics - Symbols and Abbreviated Terms - Part 4: Flame Retardants-First Edition |
|
ISO 2039-2 |
Plastics - Determination of Hardness - Part 2: Rockwell Hardness-Second Edition |
|
ISO 294-2 |
Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 2: Small Tensile Bars-First Edition; Supersedes ISO 294: 1995; Amendment 1: 05/15/2004 |
|
ISO 6945 |
Rubber Hoses - Determination of Abrasion Resistance of the Outer Cover-Second Edition; Amendment 1: 12/15/1998 |
|
ISO 23529 |
Rubber General procedures for preparing and conditioning test pieces for physical test methods-First Edition; Replaces ISO 471:1995, ISO 3383:1985, ISO 4648:1991, ISO 4661-1:1993 |
|
ISO 6603-2 |
Plastics - Determination of Puncture Impact Behaviour of Rigid Plastics - Part 2: Instrumented Impact Testing-Second Edition |
|
ISO 10964 |
Adhesives - Determination of Torque Strength of Anaerobic Adhesives on Threaded Fasteners First Edition |
|
ISO 899-1 |
Plastics - Determination of Creep Behaviour - Part 1: Tensile Creep-Second Edition |
|
ISO 1043-3 |
Plastics - Symbols and Abbreviated Terms - Part 3: Plasticizers-Second Edition |
|
ISO 1269 |
Plastics Homopolymer and copolymer resins of vinyl chloride Determination of volatile matter (including water)-Third Edition |
|
ISO 3167 |
Plastics - Multipurpose Test Specimens-Fourth Edition |
|
ISO 5893 |
Rubber and Plastics Test Equipment - Tensile, Flexural and Compression Types (Constant Rate of Traverse) - Specification-Third Edition |
|
ISO 535 |
Paper and Board - Determination of Water Absorptiveness - Cobb Method-Second Edition; CEN EN 20535: 1994 |
|
ISO 6916-1 AMD 1 |
Flexible cellular polymeric materials Sponge and expanded cellular rubber products Specification Part 1: Sheeting AMENDMENT 1-First Edition |
|
ISO 11357-5 |
Plastics - Differential Scanning Calorimetry (DSC) - Part 5: Determination of Characteristic Reaction-Curve Temperatures and Times, Enthalpy of Reaction and Degree of Conversion-First Edition |
|
ISO 3146 |
Plastics - Determination of Melting Behaviour (Melting Temperature or Melting Range) of Semi-Crystalline Polymers by Capillary Tube and Polarizing-Microscope Methods-Third Edition; Technical Corrigendum 1: 10/15/2002 |
|
ISO 1872-2 |
Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties-Third Edition |
|
ISO 8256 |
Plastics - Determination of Tensile-Impact Strength-Second Edition |
|
ISO 11359-2 |
Plastics - Thermomechanical Analysis (TMA) - Part 2: Determination of Coefficient of Linear Thermal Expansion and Glass Transition Temperature-First Edition |
|
ISO 8802-2 |
Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 2: Logical Link Control-Third Edition; ANSI/IEEE 802.2; Technical Corrigendum 1: 10/01/2000 |
|
ISO 2781 |
Rubber, Vulcanized - Determination of Density-Third Edition; Technical Corigendum 1:06/01/1996 |
|
ISO 6914 |
Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation-Second Edition |
|
ISO 75-3 |
Plastics - Determination of Temperature of Deflection under Load - Part 3: High Strength Thermosetting Laminates and Long-Fibre-Reinforced Plastics-Second Edition |
|
ISO 7619-1 |
Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)-First Edition; Together with ISO 7619-2:2004 Replaces ISO 7619:1997 |
|
ISO 10350-1 |
Plastics Acquisition and presentation of comparable single-point data Part 1: Moulding materials-Second Edition |
|
ISO 11193-1 AMD 1 |
Single-use medical examination gloves Part 1: Specification for gloves made from rubber latex or rubber solution AMENDMENT 1-First Edition |
|
ISO 1402 |
Rubber and Plastic Hoses and Hose Assemblies - Hydrostatic Testing-Third Edition; CEN EN ISO 1402: 1996 |
|
ISO 15512 |
Plastics - Determination of Water Content-First Edition; Replaces ISO 960: 1988 |
|
ISO 34-2 |
Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test pieces-Second Edition |
|
ISO 4593 |
Plastics - Film and Sheeting - Determination of Thickness by Mechanical Scanning Second Edition |
|
ISO 4674-2 |
Rubber- or Plastics-Coated Fabrics - Determination of Tear Resistance - Part 2: Ballistic Pendulum Method-First Edition |
|
ISO 11237-1 |
Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 1: Oil-based fluid applications-First Edition |
|
ISO 307 |
Plastics Polyamides Determination of viscosity number-Fifth Edition |
|
ISO 7619-2 |
Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method-First Edition; Together with ISO 7619-1:2004 Replaces ISO 7619:1997 |
|
ISO 899-2 |
Plastics - Determination of Creep Behaviour - Part 2: Flexural Creep by Three-Point Loading-Second Edition |
|
ISO 4589-1 |
Plastics - Determination of Burning Behavior by Oxygen Index Part 1: Guidance-First Edition |
|
ISO 472 |
Plastics - Vocabulary-Third Edition |
|
ISO 11443 |
Plastics - Determination of the Fluidity of Plastics Using Capillary and Slit-Die Rheometers-Second edition |
|
ISO 2411 |
Rubber- or Plastics-Coated Fabrics - Determination of Coating Adhesion-Third Edition |
|
ISO 2818 CORR 1 |
Plastics Preparation of test specimens by machining TECHNICAL CORRIGENDUM 1 |
|
ISO 3862-1 |
Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 1: Oil-based fluid applications-First Edition |
|
ISO 6603-1 |
Plastics - Determination of Puncture Impact Behaviour of Rigid Plastics - Part 1: Non-Instrumented Impact Testing-Second Edition |
|
ISO 1873-2 |
Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties-Third Edition |
|
ISO 4590 |
Rigid Cellular Plastics - Determination of the Volume Percentage of Open Cells and of Closed Cells-Second Edition |
|
ISO 4675 |
Rubber- or Plastics-Coated Fabrics - Low-Temperature Bend Test Second Edition |
|
ISO 813 |
Rubber, Vulcanized or Thermoplastic - Determination of Adhesion to a Rigid Substrate - 90 Degree Peel Method-Third Edition |
|
ISO 11357-4 |
Plastics Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity-First Edition |
|
ISO 11358 |
Plastics - Thermogravimetry (TG) of Polymers - General Principles-First Edition |
|
ISO 11359-1 |
Plastics - Thermomechanical Analysis (TMA) - Part 1: General Principles-First Edition |
|
ISO 1183-2 |
Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method-First Edition; Replaces ISO 1183:1987 |
|
ISO 14130 |
Fibre-Reinforced Plastic Composites - Determination of Apparent Interlaminar Shear Strength by Short-Beam Method-First Edition; Corrigendum 1: 11/1/2003 |
|
ISO 15024 |
Fibre-Reinforced Plastic Composites - Determination of Mode I Interlaminar Fracture Toughness, GIC, for Unidirectionally Reinforced Materials-First Edition |
|
ISO 175 |
Plastics - Methods of Test for the Determination of the Effects of Immersion in Liquid Chemicals-Second Edition |
|
ISO 3302-2 |
Rubber - Tolerances for Products - Part 2: Geometrical Tolerances-First Edition |
|
ISO 4587 |
Adhesives - Determination of Tensile Lap-Shear Strength of Rigid-to-Rigid Bonded Assemblies-Third Edition |
|
ISO 9773 |
Plastics - Determination of Burning Behaviour of Thin Flexible Vertical Specimens in Contact with a Small-Flame Ignition Source-Second Edition; Amendment 1: 09/15/2003 |
|
ISO 1436-1 |
Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 1: Oil-based fluid applications-First Edition |
|
ISO 17281 |
Plastics Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)-First Edition |
|
ISO 2230 |
Rubber Products - Guidelines for Storage-Second Edition |
|
ISO 1265 |
Plastics Poly(vinyl chloride) resins Determination of number of impurities and foreign particles-Second Edition |
|
ISO 1407 CORR 1 |
Rubber Determination of solvent extract |
|
ISO 14125 |
Fibre-Reinforced Plastic Composites - Determination of Flexural Properties-First Edition; Technical Corrigendum 1: 07/15/2001 |
|
ISO 3417 |
Rubber - Measurement of Vulcanization Characteristics with the Oscillating Disc Curemeter Second Edition |
|
ISO 4674-1 |
Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods-First Edition |
|
ISO 846 |
Plastics - Evaluation of the Action of Microorganisms-Second Edition |
|
ISO 974 |
Plastics - Determination of the Brittleness Temperature by Impact-Second Edition |
|
ISO 11357-7 |
Plastics - Differential Scanning Calorimetry (DSC) - Part 7: Determination of Crystallization Kinetics-First Edition |
|
ISO 11358-2 |
Plastics Thermogravimetry (TG) of polymers Part 2: Determination of activation energy-First Edition |
|
ISO 2897-1 |
Plastics - Impact-Resistant Polystyrene (PS-I) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-Second Edition |
|
ISO 3861 |
Rubber Hoses for Sand and Grit Blasting - Specification-Third edition |
|
ISO 4589-2 |
Plastics Determination of burning behaviour by oxygen index Part 2: Ambient-temperature test-First Edition; Amendment 1: 01/15/2005 |
|
ISO 5019-2 |
Refractory Bricks - Dimensions - Part 2: Arch Bricks First Edition |
|
ISO 536 |
Paper and Board - Determination of Grammage-Second Edition |
|
ISO 6721-10 |
Plastics - Determination of Dynamic Mechanical Properties - Part 10: Complex Shear Viscosity Using a Parallel-Plate Oscillatory Rheometer-Second Edition |
|
ISO 7214 |
Cellular Plastics - Polyethylene - Methods of Test-Third Edition |
|
ISO TR 7620 |
Rubber materials - Chemical resistance-Second edition |
|
ISO 11475 |
Paper and Board - Determination of CIE Whiteness, D65/10 Degree (Outdoor Daylight)-Second Edition |
|
ISO 13007-1 CORR 1 |
Ceramic tiles Grouts and adhesives Part 1: Terms, definitions and specifications for adhesives TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 1307 |
Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses-Fourth Edition |
|
ISO 4589-3 |
Plastics - Determination of Burning Behaviour by Oxygen Index - Part 3: Elevated-Temperature Test First Edition;-CEN EN ISO 4589-3: 1996 |
|
ISO 4643 |
Moulded Plastics Footwear - Lined or Unlined Poly (Vinyl Chloride) Boots for General Industrial Use - Specification Second Edition |
|
ISO 877 |
Plastics - Methods of Exposure to Direct Weathering, to Weathering Using Glass-Filtered Daylight, and to Intensified Weathering by Daylight Using Fresnel Mirrors-Second Edition |
|
ISO 9026 |
Raw rubber or unvulcanized compounds Determination of green strength-Second Edition |
|
ISO 1873-1 |
Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-Fourth Edition; CEN EN ISO 1873-1: 1995 |
|
ISO 2528 |
Sheet Materials - Determination of Water Vapour Transmission Rate - Gravimetric (Dish) Method-Second Edition |
|
ISO 293 |
Plastics Compression moulding of test specimens of thermoplastic materials-Third Edition |
|
ISO 3384 |
Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures-Fifth Edition |
|
ISO 4591 |
Plastics - Film and Sheeting - Determination of Average Thickness of a Sample, and Average Thickness and Yield of a Roll, by Gravimetric Techniques (Gravimetric Thickness) Second Edition |
|
ISO 6803 |
Rubber or Plastics Hoses and Hose Assemblies - Hydraulic-Pressure Impulse Test without Flexing Second Edition |
|
ISO 845 |
Cellular plastics and rubbers Determination of apparent density-Third Edition |
|
ISO 10545-13 |
Ceramic Tiles - Part 13: Determination of Chemical Resistance First Edition |
|
ISO 1183-3 |
Plastics - Methods for Determining the Density of Non-Cellular Plastics - Part 3: Gas Pyknometer Method-First Edition |
|
ISO 14782 |
Plastics - Determination of haze for transparent materials-First edition; Technical Corrigendum 1: 04/15/2005 |
|
ISO 1628-1 |
Plastics - Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 1: General Principles-Second Edition |
|
ISO 7751 |
Rubber and Plastics Hoses and Hose Assemblies - Ratios of Proof and Burst Pressure to Design Working Pressure Second Edition |
|
ISO 7792-2 |
Plastics - Thermoplastic Polyester (TP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties-Second Edition |
|
ISO 10545-10 |
Ceramic Tiles - Part 10: Determination of Moisture Expansion First Edition |
|
ISO 10545-7 |
Ceramic Tiles - Part 7: Determination of Resistance to Surface Abrasion for Glazed Tiles-First Edition |
|
ISO 12680-1 |
Methods of test for refractory products Part 1: Determination of dynamic Young ´s modulus (MOE) by impulse excitation of vibration-First Edition |
|
ISO 14679 |
Adhesives - Measurement of Adhesion Characteristics by a Three-Point Bending Method-First Edition |
|
ISO 2878 |
Rubber - Antistatic and conductive products - Determination of electrical resistance-Third Edition |
|
ISO 294-5 |
Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 5: Preparation of Standard Specimens for Investigating Anisotropy-First Edition; Technical Corrigendum 1: 3/15/2003; Amendment 1: 05/01/2004 |
|
ISO 3219 |
Plastics - Polymers/Resins in the Liquid State or as Emulsions or Dispersions - Determination of Viscosity Using a Rotational Viscometer with Defined Shear Rate Second Edition; (CEN EN ISO 3219: 1995) |
|
ISO 3862-2 |
Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 2: Water-based fluid applications-First edition; Cancels and Replaces ISO 3862:1991 |
|
ISO 5603 |
Rubber, Vulcanized - Determination of Adhesion to Wire Cord First Edition-Second Edition |
|
ISO 633 |
Cork - Vocabulary-Second Edition |
|
ISO 7765-2 |
Plastics Film and Sheeting - Determination of Impact Resistance by the Free-Falling Dart Method First Edition |
|
ISO 8295 |
Plastics - Film and Sheeting - Determination of the Coefficients of Friction Second Edition |
|
ISO 9727-1 |
Cylindrical cork stoppers - Physical tests - Part 1: Determination of dimensions-First Edition |
|
ISO 9727-2 |
Cylindrical cork stoppers Physical tests Part 2: Determination of mass and apparent density for agglomerated cork stoppers-First Edition |
|
ISO 9772 |
Cellular Plastics - Determination of Horizontal Burning Characteristics of Small Specimens Subjected to a Small Flame-Second Edition; Amendment 1: 9/15/2003 |
|
ISO TR 17784 |
Rubber and plastics hoses and hose assemblies Guide for use by purchasers, assemblers, installers and operating personnel-First Edition |
|
ISO 10545-1 |
Ceramic Tiles - Part 1: Sampling and Basis for Acceptance First Edition |
|
ISO 10545-16 |
Ceramic Tiles - Part 16: Determination of Small Colour Differences-First Edition |
|
ISO 10545-2 |
Ceramic Tiles - Part 2: Determination of Dimensions and Surface Quality-First Edition; Corrigendum 1 02/15/1997 |
|
ISO 10545-5 |
Ceramic Tiles - Part 5: Determination of Impact Resistance by Measurement of Coefficient of Restitution-First Edition; Corrigendum 1 02/15/1997 |
|
ISO 10545-6 |
Ceramic Tiles - Part 6: Determination of Resistance to Deep Abrasion for Unglazed Tiles First Edition |
|
ISO 10545-8 |
Ceramic Tiles - Part 8: Determination of Linear Thermal Expansion First Edition-CEN 10 545-8: 1996 |
|
ISO 1421 |
Rubber- or Plastics-Coated Fabrics - Determination of Tensile Strength and Elongation at Break-Second Edition |
|
ISO 1431-3 |
Rubber, Vulcanized or Thermoplastic - Resistance to Ozone Cracking - Part 3: Reference and Alternative Methods for Determining the Ozone Concentration in Laboratory Test Chambers-First Edition |
|
ISO 2006 |
Rubber Latex, Synthetic - Determination of High-Speed Mechanical Stability-Second Edition |
|
ISO 2231 |
Rubber- or Plastics-Coated Fabrics - Standard Atmospheres for Conditioning and Testing-Second Edition; CEN EN ISO 2231: 1995 |
|
ISO 2393 |
Rubber Test Mixes - Preparation, Mixing and Vulcanization - Equipment and Procedures-Second Edition |
|
ISO 3949 |
Plastics hoses and hose assemblies Textile-reinforced types for hydraulic applications Specification-Third Edition |
|
ISO 4604 |
Textile Glass - Woven Fabrics - Determination of Conventional Flexural Stiffness - Fixed-Angle Flexometer Method First Edition |
|
ISO 5659-2 |
Plastics Smoke generation Part 2: Determination of optical density by a single-chamber test-Second Edition |
|
ISO 6447 |
Rubber Seals - Joint Rings Used for Gas Supply Pipes and Fittings - Specification for Material First Edition |
|
ISO 6452 |
Rubber- or Plastics-Coated Fabrics - Determination of Fogging Characteristics of Trim Materials in the Interior of Automobiles-Second Edition |
|
ISO 6721-1 |
Plastics - Determination of Dynamic Mechanical Properties - Part 1: General Principles-Second Edition |
|
ISO 7743 |
Rubber, vulcanized or thermoplastic Determination of compression stressstrain properties-Second Edition |
|
ISO 8029 |
Plastics hose General-purpose collapsible water hose, textilereinforced Specification-Second Edition |
|
ISO 8308 |
Rubber and plastics hoses and tubing Determination of transmission of liquids through hose and tubing walls-Third Edition |
|
ISO 8510-2 |
Adhesives Peel test for a flexible-bonded-to-rigid test specimen assembly Part 2: 180 ° peel-Second Edition |
|
ISO 10123 |
Adhesives - Determination of Shear Strength of Anaerobic Adhesives Using Pin-and-Collar Specimens First Edition |
|
ISO 10545-12 |
Ceramic Tiles - Part 12: Determination of Frost Resistance-First Edition; Corrigendum 1 02/15/1997 |
|
ISO 10545-14 |
Ceramic Tiles - Part 14: Determination of Resistance to Stains-First Edition; Corrigendum 1 02/15/1997 |
|
ISO 10545-4 |
Ceramic Tiles - Part 4: Determination of Modulus of Rupture and Breaking Strength-Second Edition |
|
ISO 1209-2 |
Rigid cellular plastics Determination of flexural properties Part 2: Determination of flexural strength and apparent flexural modulus of elasticity-Third Edition |
|
ISO 13007-3 |
Ceramic tiles Grouts and adhesives Part 3: Terms, definitions and specifications for grouts-First Edition |
|
ISO 14855-1 |
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method-First Edition; Replaces ISO 14855:1999 |
|
ISO 1922 |
Rigid Cellular Plastics - Determination of Shear Strength-Third Edition |
|
ISO 216 |
Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction-Second Edition |
|
ISO 2469 |
Paper, board and pulps Measurement of diffuse radiance factor-Fourth Edition |
|
ISO 35 AMD 1 |
Natural rubber latex concentrate Determination of mechanical stability AMENDMENT 1: Precision data-Fifth Edition |
|
ISO 5659-1 |
Plastics - Smoke Generation - Part 1: Guidance on Optical-Density Testing First Edition |
|
ISO 604 |
Plastics - Determination of Compressive Properties-Third Edition |
|
ISO 6721-7 AMD 1 |
Plastics - Determination of Dynamic Mechanical Properties - Part 7: Torsional Vibration - Non-Resonance Method-First Edition |
|
ISO 8330 |
Rubber and Plastics Hoses and Hose Assemblies - Vocabulary-Second Edition |
|
ISO 844 |
Rigid cellular plastics Determination of compression properties-Fifth Edition |
|
ISO 8510-1 |
Adhesives - Peel Test for a Flexible-Bonded-to- Rigid Test Specimen Assembly - Part 1: 90 Degree Peel First Edition; (CEN EN 28510-1: 1993) |
|
ISO 10545-11 |
Ceramic Tiles - Part 11: Determination of Crazing Resistance for Glazed Tiles First Edition-CEN EN ISO 10 545-11: 1996 |
|
ISO 10545-15 |
Ceramic Tiles - Part 15: Determination of Lead and Cadmium Given off by Glazed Tiles First Edition |
|
ISO 10545-9 |
Ceramic tiles Part 9: Determination of resistance to thermal shock-Second Edition |
|
ISO 11403-1 |
Plastics - Acquisition and Presentation of Comparable Multipoint Data - Part 1: Mechanical Properties-Second Edition |
|
ISO 13006 |
Ceramic Tiles - Definitions, Classification, Characteristics and Marking-First Edition |
|
ISO 13007-2 CORR 1 |
Ceramic tiles Grouts and adhesives Part 2: Test methods for adhesives TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 13894-1 |
High-Pressure Decorative Laminates - Composite Elements - Part 1: Test Methods-First Edition |
|
ISO 15988 |
Plastics Film and sheeting Biaxially oriented poly(ethylene terephthalate) (PET) films-First Edition |
|
ISO 1624 |
Plastics - Vinyl Chloride Homopolymer and Copolymer Resins - Sieve Analysis in Water-Second Edition |
|
ISO 182-1 |
Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 1: Congo Red Method-First Edition |
|
ISO 1874-1 |
Plastics - Polyamide (PA) Moulding and Extrusion Materials - Part 1: Designation-Second Edition; Corrected and Reprinted - 1992 |
|
ISO 22762-1 CORR 1 |
Elastomeric seismic-protection isolators Part 1: Test methods TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 2921 |
Rubber, Vulcanized - Determination of Low-Temperature Characteristics - Temperature-Retraction Procedure (TR Test)-Fourth edition |
|
ISO 4081 |
Rubber hoses and tubing for cooling systems for internal-combustion engines Specification-Second Edition |
|
ISO 4575 |
Plastics Poly(vinyl chloride) pastes Determination of apparent viscosity using the Severs rheometer-Third Edition |
|
ISO 4578 |
Adhesives - Determination of Peel Resistance of High-Strength Adhesive Bonds - Floating Roller Method-Third Edition |
|
ISO 4649 |
Rubber, Vulcanized or Thermoplastic - Determination of Abrasion Resistance Using a Rotating Cylindrical Drum Device-Second Edition |
|
ISO 6721-5 AMD 1 |
Plastics - Determination of Dynamic Mechanical Properties - Part 5: Flexural Vibration - Non-Resonance Method-First Edition |
|
ISO 10080 |
Refractory Products - Classification of Dense, Shaped Acid-Resisting Products First Edition |
|
ISO 11359-3 |
Plastics - Thermomechanical Analysis (TMA) - Part 3: Determination of Penetration Temperature-First Edition |
|
ISO 1146 |
Pyrometric Reference Cones for Laboratory Use - Specification-First Edition |
|
ISO 11542-2 CORR 1 |
Plastics Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 15360-2 CORR 1 |
Recycled Pulps - Estimation of Stickies and Plastics - Part 2: Image Analysis Method TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 16770 |
Plastics Determination of environmental stress cracking (ESC) of polyethylene Full-notch creep test (FNCT)-First Edition |
|
ISO 1827 |
Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods-Third Edition |
|
ISO 22088-1 |
Plastics Determination of resistance to environmental stress cracking (ESC) Part 1: General guidance-First Edition |
|
ISO 22088-3 |
Plastics Determination of resistance to environmental stress cracking (ESC) Part 3: Bent strip method-First Edition;:1986 |
|
ISO 2285 |
Rubber, vulcanized or thermoplastic Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load-Sixth Edition |
|
ISO 2471 |
Paper and Board - Determination of Opacity (Paper Backing) - Diffuse Reflectance Method-Third Edition |
|
ISO 2896 |
Rigid Cellular Plastics - Determination of Water Absorption-Third Edition |
|
ISO 3386-1 |
Polymeric Materials, Cellular Flexible - Determination of Stress-Strain Characteristic in Compression - Part 1: Low-Density Materials Second Edition |
|
ISO 3915 |
Plastics - Measurement of Resistivity of Conductive Plastics First Edition |
|
ISO 4662 |
Rubber - Determination of Rebound Resilience of Vulcanizates Second Edition |
|
ISO 5014 |
Dense and Insulating Shaped Refactory Products - Determination of Modulus of Rupture at Ambient Temperature-Second Edition |
|
ISO 5019-1 |
Refractory Bricks - Dimensions - Part 1: Rectangular Bricks First Edition |
|
ISO 5470-2 |
Rubber or Plastics Coated Fabrics - Determination of Abrasion Resistance - Part 2: Martindale Abrader-First Edition |
|
ISO 6187 |
Rigid Cellular Plastics - Determination of Friability-First Edition |
|
ISO 6383-2 |
Plastics - Film and Sheeting - Determination of Tear Resistance - Part 2: Elmendorf Method First Edition |
|
ISO 6588-1 |
Paper, board and pulps - Determination of pH of aqueous extracts - Part 1: Cold extraction-First edition; Together with ISO 6588-2 cancels and replaces ISO 6588:1981 |
|
ISO 6588-2 |
Paper, board and pulps Determination of pH of aqueous extracts Part 2: Hot extraction-First edition; Together with ISO 6588-1 cancels and replaces ISO 6588:1981 |
|
ISO 6801 |
Rubber or Plastics Hoses - Determination of Volumetric Expansion First Edition; (CEN EN 26801: 1993) |
|
ISO 6943 |
Rubber, Vulcanized - Determination of Tension Fatigue-Second Edition |
|
ISO 7765-1 |
Plastics Film and Sheeting - Determination of Impact Resistance by the Free-Falling Dart Method Part 1: Staircase Methods First Edition |
|
ISO 8606 |
Plastics - Prepregs - Bulk Moulding Compound (BMC) and Dough Moulding (DMC) - Basis for a Specification First Edition |
|
ISO 9924-1 |
Rubber and Rubber Products - Determination of the Composition of Vulcanizates and Uncured Compounds by Thermogravimetry - Part 1: Butadiene, Ethylene-Propylene Copolymer and Terpolymer, Isobutene-Isoprene, Isoprene and Styrene-Butadiene Rubbers-Second Edition |
|
ISO 9988-1 |
Plastics - Polyoxymethylene (POM) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-Third Edition |
|
ISO 10058 |
Magnesites and Dolomites - Chemical Analysis First Edition (CEN EN ISO 10058: 1996) |
|
ISO 10059-2 |
Dense, shaped refractory products - Determination of cold compressive strength - Part 2: Test with packing-First Edition |
|
ISO 10365 |
Adhesives - Designation of Main Failure Patterns First Edition (CEN EN ISO 10365: 1995) |
|
ISO 1060-1 |
Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride - Part 1: Designation System and Basis for Specifications-Second Edition |
|
ISO 11193-2 |
Single-use medical examination gloves Part 2: Specification for gloves made from poly(vinyl chloride)-First Edition; Cancels and Replaces ISO 11193:1994 |
|
ISO 11346 |
Rubber, vulcanized or thermoplastic Estimation of life-time and maximum temperature of use-Second Edition |
|
ISO 127 |
Rubber, Natural Latex Concentrate - Determination of KOH Number-Third Edition: Amendment 1: 02/01/2006 |
|
ISO 13003 |
Fibre-reinforced plastics - Determination of fatigue properties under cyclic loading conditions-First Edition |
|
ISO 13007-4 |
Ceramic tiles Grouts and adhesives Part 4: Test methods for grouts-First Edition |
|
ISO 13468-1 |
Plastics - Determination of the Total Luminous Transmittance of Transparent Materials - Part 1: Single-Beam Instrument First Edition-CEN EN ISO 13 468-1: 1996 |
|
ISO 13802 |
Plastics - Verification of Pendulum Impact-Testing Machines - Charpy, Izod and Tensile Impact-Testing-First Edition; Technical Corrigendum 1 04/15/2000 |
|
ISO 16014-1 CORR 1 |
Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 1: General principles TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 1628-2 |
Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 2: Poly(Vinyl Chloride) Resins-Second Edition |
|
ISO 1663 |
Rigid cellular plastics Determination of water vapour transmission properties-Third edition |
|
ISO 17087 |
Specifications for adhesives used for finger joints in non-structural lumber products-First Edition |
|
ISO 1746 |
Rubber or Plastics Hoses and Tubing - Bending Tests-Third Edition; Corrigendum 1: 05/01/1999 |
|
ISO 18752 |
Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification-First Edition |
|
ISO 1923 |
Cellular Plastics and Rubbers - Determination of Linear Dimensions-Second Edition; CEN PREN 21923: 1994; CEN EN ISO 1923: 1995 |
|
ISO 1927 |
Prepared Unshaped Refractory Materials (Dense and Insulating) - Classification-Second Edition |
|
ISO 2000 |
Rubber, raw natural Guidelines for the specification of technically specified rubber (TSR)-Sixth Edition |
|
ISO 2555 |
Plastics - Resins in the Liquid State or as Emulsions or Dispersions - Determination of Apparent Viscosity by the Brookfield Test Method-Second Edition; Corrected and Reprinted- 1990 |
|
ISO 2796 |
Cellular Plastics, Rigid - Test for Dimensional Stability Third Edition |
|
ISO 3011 |
Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Ozone Cracking Under Static Conditions-Third Edition |
|
ISO 3387 |
Rubber - Determination of Crystallization Effects by Hardness Measurements-Second Edition; Technical Corrigendum 1: 2000 |
|
ISO 4079-1 |
Rubber Hoses and Hose Assemblies - Textile-Reinforced Hydraulic Types - Specification - Part 1: Oil-Based Fluid Applications-First Edition |
|
ISO 4097 |
Rubber, Ethylene-Propylene-Diene (EPDM) - Evaluation Procedure-Fifth Edition |
|
ISO 4602 |
Reinforcements - Woven Fabrics - Determination of Number of Yarns per Unit Length of Warp and Weft-Second Edition |
|
ISO 4633 |
Rubber Seals - Joint Rings for Water Supply, Drainage and Sewerage Pipelines - Specification for Materials-Third Edition; Corrected Version: 04/01/2004 |
|
ISO 4646 |
Rubber- or Plastics-Coated Fabrics - Low-Temperature Impact Test Second Edition |
|
ISO 5794-1 CORR 2 |
Rubber compounding ingredients Silica, precipitated, hydrated Part 1: Non-rubber tests TECHNICAL CORRIGENDUM 2-Third edition |
|
ISO 6448 |
Rubber Seals - Joint Rings Used for Petroleum Product Supply Pipes and Fittings - Specification for Material First Edition |
|
ISO 6721-9 AMD 1 |
Plastics Determination of dynamic mechanical properties Part 9: Tensile vibration Sonic-pulse propagation method, AMENDMENT 1: Precision-First Edition |
|
ISO 7267-3 |
Rubber-covered rollers - Determination of apparent hardness - Part 3: Pusey and Jones method-Second Edition |
|
ISO 8031 |
Rubber and Plastics Hoses and Hose Assemblies - Determination of Electrical Resistance Second Edition; (CEN EN 28031: 1993) |
|
ISO 8580 |
Rubber and Plastics Hoses - Determination of Ultra-Violet Resistance Under Static Conditions First Edition; (CEN EN ISO 8580: 1995) |
|
ISO 871 |
Plastics - Determination of Ignition Temperature Using a Hot-Air Furnace-Third Edition |
|
ISO 9727-4 |
Cylindrical cork stoppers Physical tests Part 4: Determination of dimensional recovery after compression-First Edition |
|
ISO 9727-6 |
Cylindrical cork stoppers Physical tests Part 6: Determination of liquid tightness-First Edition |
|
ISO 9924-2 |
Rubber and Rubber Products - Determination of the Composition of Vulcanizates and Uncured Compounds by Thermogravimetry - Part 2: Acrylonitrile-Butadiene and Halobutyl Rubbers-First Edition |
|
ISO 9994 AMD 1 |
Lighters Safety specification AMENDMENT 1: Clarification of structural requirements-Fourth Edition |
|
ISO TR 581 |
Weldability Metallic materials General principles-First Edition; Replaces ISO 581: 1980 |
|
ISO 1268-1 |
Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 1: General Conditions-First Edition |
|
ISO 13363 |
Rubber and plastics hoses for marineengine wet-exhaust systems Specification-First Edition |
|
ISO 1419 |
Rubber- or Plastics-Coated Fabrics - Accelerated-Ageing Tests-Second Edition |
|
ISO 1420 |
Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Penetration by Water-Third Edition |
|
ISO 14558 |
Rubber - Determination of Residual Unsaturation of Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectroscopy-First Edition |
|
ISO 14851 |
Determination of the ultimate aerobic biodegradibility of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer-First edition; Technical Corrigendum 1: 05/2005 |
|
ISO 177 |
Plastics - Determination of Migration of Plasticizers-Second Edition |
|
ISO 1795 |
Rubber, Raw Natural and Raw Synthetic - Sampling and Further Preparative Procedures-Fourth Edition |
|
ISO 2245 |
Shaped insulating refractory products Classification-Third Edition |
|
ISO 2398 |
Rubber hoses, textile-reinforced, for compressed air Specification-Fifth Edition |
|
ISO 2477 |
Shaped insulating refractory products - Determination of permanent change in dimensions on heating-Third Edition |
|
ISO 36 |
Rubber, Vulcanized or Thermoplastic - Determination of Adhesion to Textile Fabric-Fourth Edition |
|
ISO 4671 |
Rubber and plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assemblies-Third Edition |
|
ISO 528 |
Refractory Products - Determination of Pyrometric Cone Equivalent (Refractoriness)-First Edition |
|
ISO 6721-6 AMD 1 |
Plastics - Determination of Dynamic Mechanical Properties - Part 6: Shear Vibration - Non-Resonance Method-First Edition |
|
ISO 6922 |
Adhesives - Determination of Tensile Strength of Butt Joints First Edition; (CEN EN 26922: 1993) |
|
ISO 7391-1 |
Plastics Polycarbonate (PC) moulding and extrusion materials Part 1: Designation system and basis for specifications-Third Edition |
|
ISO 7391-2 |
Plastics Polycarbonate (PC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties-Third Edition |
|
ISO 8013 |
Rubber, vulcanized Determination of creep in compression or shear-Second Edition |