|
ISO 14703 |
Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Sample Preparation for the Determination of Particle Size Distribution of Ceramic Powders-First Edition |
|
ISO 15927-1 |
Hygrothermal performance of buildings Calculation and presentation of climatic data Part 1: Monthly means of single meteorological elements-First Edition |
|
ISO 16933 |
Glass in building Explosion-resistant security glazing Test and classification for arena air-blast loading-First edition |
|
ISO 2082 |
Metallic Coatings - Electroplated Coatings of Cadmium on Iron or Steel-Second Edition |
|
ISO 2271 |
Surface Active Agents - Detergents - Determination of Anionic-Active Matter by Manual or Mechanical Direct Two-Phase Titration Procedure-Second Edition |
|
ISO 2747 |
Vitreous and Porcelain Enamels - Enamelled Cooking Utensils - Determination of Resistance to Thermal Shock-Second Edition |
|
ISO 2871-2 |
Surface Active Agents - Detergents - Determination of Cationic-Active Matter Content - Part 2: Cationic-Active Matter of Low Molecular Mass (Between 200 and 500) First Edition-Corrected and Reprinted 12/15/1991 |
|
ISO 3585 |
Borosilicate Glass 3.3 - Properties-Third Edition |
|
ISO 3613 |
Chromate Conversion Coatings on Zinc,Cadmium, Aluminium-Zinc Alloys and Zinc-Aluminium Alloys - Test Methods-Second Edition |
|
ISO 3880-1 |
Building Construction - Stairs - Vocabulary - Part 1: First Edition |
|
ISO 4463-1 |
Measurement Methods for Building - Setting-Out and Measurement - Part 1: Planning and Organization, Measuring Procedures, Acceptance Criteria First Edition |
|
ISO 4524-5 |
Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 5: Adhesion Tests First Edition |
|
ISO 6241 |
Performance Standards in Building - Principles for Their Preparation and Factors to Be Considered First Edition |
|
ISO 6274 |
Concrete - Sieve Analysis of Aggregates First Edition |
|
ISO 6782 |
Aggregates for Concrete - Determination of Bulk Density First Edition |
|
ISO 6839 |
Anionic Surface Active Agents - Determination of Solubility in Water First Edition |
|
ISO 7345 |
Thermal Insulation - Physical Quantities and Definitions Second Edition; (CEN EN ISO 7345: 1995) |
|
ISO 787-4 |
General Methods of Test for Pigments and Extenders - Part 4: Determination of Acidity or Alkalinity of the Aqueous Extract-First Edition |
|
ISO 8130-3 |
Coating Powders - Part 3: Determination of Density by Liquid Displacement Pyknometer First Edition |
|
ISO 8215 |
Surface Active Agents - Washing Powders - Determination of Total Silica Content - Gravimetric Method First Edition |
|
ISO 8291 |
Vitreous and Porcelain Enamels - Method of Test of Self-Cleaning Properties First Edition |
|
ISO 8339 |
Building construction Sealants Determination of tensile properties (Extension to break)-Second Edition |
|
ISO 8623 |
Tall-Oil Fatty Acids for Paints and Varnishes - Specifications and Test Methods-First Edition |
|
ISO 9288 |
Thermal Insulation - Heat Transfer by Radiation - Physical Quantities and Definitions First Edition (CEN EN ISO 9288: 1996) |
|
ISO 9379 |
Operating forces Test method Doors-Second Edition |
|
ISO TS 17892-12 |
Geotechnical investigation and testing Laboratory testing of soil Part 12: Determination of Atterberg limits-First Edition |
|
ISO TS 17892-4 |
Geotechnical investigation and testing Laboratory testing of soil Part 4: Determination of particle size distribution-First Edition |
|
ISO 10291 |
Glass in Building - Determination of Steady-State U Values (Thermal Transmittance) of Multiple Glazing - Guarded Hot Plate Method First Edition |
|
ISO 10546 |
Chemical Conversion Coatings - Rinsed and Non-Rinsed Chromate Conversion Coatings on Aluminium and Aluminium Alloys First Edition |
|
ISO 10590 |
Building construction Sealants Determination of tensile properties of sealants at maintained extension after immersion in water-Second Edition |
|
ISO 11126-8 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning Abrasives - Part 8: Olivine Sand First Edition |
|
ISO 11126-9 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast-Cleaning Abrasives - Part 9: Staurolite-First Edition |
|
ISO 11127-2 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning Abrasives - Part 2: Determination of Particle Distribution First Edition |
|
ISO 11127-7 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning Abrasives - Part 7: Determination of Water- Soluble Chlorides First Edition |
|
ISO 12466-2 |
Plywood Bonding quality Part 2: Requirements-Second edition |
|
ISO 1248 TECH COR |
Iron oxide pigments Specifications and methods of test |
|
ISO 12494 |
Atmospheric icing of structures-First Edition |
|
ISO 12567-2 |
Thermal performance of windows and doors Determination of thermal transmittance by hot box method Part 2: Roof windows and other projecting windows-First Edition |
|
ISO 12570 |
Hydrothermal Performance of Building Materials and Products - Determination of Moisture Content by Drying at Elevated Temperature-First Edition |
|
ISO 13351 |
Industrial Fans - Dimensions First Edition |
|
ISO 1342 |
Oil of Rosemary (Rosmarinus Officinalis Linnaeus)-Second Edition |
|
ISO 1388-1 |
Ethanol for Industrial Use - Methods of Test - Part 1: General-First Edition |
|
ISO 14446 |
Binders for Paints and Varnishes - Determination of the Viscosity of Industrial Cellulose Nitrate Solutions and Classification of Such Solutions-First Edition |
|
ISO 14706 |
Surface Chemical Analysis - Determination of Surface Elemental Comtamination on Silicon Wafers by Total-Reflection X-Ray Fluorescence (TXRF) Spectroscopy-First Edition |
|
ISO 15148 |
Hygrothermal Perfor4mance of Building Materials and Products - Determination of Water Absorption Coefficient by Partial Immersion-First Edition |
|
ISO 15645 |
Road Construction and Maintenance Equipment Road Milling Machinery Terminology and Commercial Specifications-First Edition |
|
ISO 15730 |
Metallic and Other Inorganic Coatings - Electropolishing as a Means of Smoothing and Passivating Stainless Steel-First Edition |
|
ISO 15796 |
Gas analysis Investigation and treatment of analytical bias-First Edition |
|
ISO 16484-2 |
Building automation and control systems (BACS) Part 2: Hardware-First Edition |
|
ISO 16934 |
Glass in building - Explosion-resistant security glazing - Test and classification by shock-tube loading-First Edition |
|
ISO 16936-1 |
Glass in building Forced-entry security glazing Part 1: Test and classification by repetitive ball drop-First Edition |
|
ISO 17565 |
Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for flexural strength of monolithic ceramics at elevated temperature-First Edition |
|
ISO 1773 |
Laboratory Glassware - Narrow-Necked Boiling Flasks-Second Edition |
|
ISO 1803 |
Building Construction - Tolerances - Expression of Dimensional Accuracy - Principles and Terminology-First Edition; Cancels and Replaces ISO 4464: 1980 |
|
ISO 18115 AMD 2 |
Surface chemical analysis Vocabulary AMENDMENT 2-First Edition |
|
ISO 19338 |
Performance and assessment requirements for design standards on structural concrete TECHNICAL CORRIGENDUM 1-Second edition |
|
ISO 1954 |
1999 Plywood - Tolerances on Dimensions-First Edition |
|
ISO 20506 |
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of the in-plane shear strength of continuous-fibre-reinforced composites at ambient temperature by the Iosipescu test-First Edition |
|
ISO 212 |
Essential Oils - Sampling-Second Edition |
|
ISO 21227-3 |
Paints and varnishes Evaluation of defects on coated surfaces using optical imaging Part 3: Evaluation of delamination and corrosion around a scribe-First Edition |
|
ISO 21687 |
Carbonaceous materials used in the production of aluminium Determination of density by gas pyknometry (volumetric) using helium as the analysis gas Solid materials-First Edition |
|
ISO 2179 |
Electroplated Coatings of Tin-Nickel Alloy - Specification and Test Methods-Second Edition |
|
ISO 22242 |
Road construction and road maintenance machinery and equipment Basic types Identification and description-First Edition |
|
ISO 24370 |
Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method-First edition |
|
ISO 2633 |
Determination of Imposed Floor Loads in Production Buildings and Warehouses First Edition |
|
ISO 2724 |
Vitreous and Porcelain Enamels for Cast Iron-Production of Specimens for Testing First Edition |
|
ISO 276 |
Binders for Paints and Varnishes - Linseed Stand Oil - Requirements and Methods of Test-Second Edition |
|
ISO 3055 |
Kitchen Equipment - Coordinating Sizes Second Edition |
|
ISO 3130 |
Wood - Determination of Moisture Content for Physical and Mechanical Tests First Edition |
|
ISO 3518 |
Oil of Sandalwood (Santalum album L.)-Second Edition |
|
ISO 3524 |
Oil of cinnamon leaf, Sri Lanka type (Cinnamomum zeylanicum Blume)-Second Edition |
|
ISO 3527 |
Oil of Parsley Fruits (Petroselinum Sativum Hoffm.)-Second Edition |
|
ISO 3707 |
Phosphoric Acid for Industrial Use (Including Foodstuffs) - Determination of Calcium Content - Flame Atomic Absorption Method First Edition (PNS 855:1989) |
|
ISO 3881 |
Building Construction - Modular Co-Ordination - Stairs and Stair Openings - Co-Ordinating Dimensions First Edition |
|
ISO 3892 |
Conversion Coatings on Metallic Materials - Determination of Coating Mass per Unit Area - Gravimetric Methods Edition; (CEN EN ISO 3892: 1994) (PNS 683: 1990)-Second Edition |
|
ISO 4524-2 |
Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 2: Mixed Flowing Gas (MFG) Environmental Tests-Second Edition |
|
ISO 4524-6 |
Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 6: Determination of the Presence of Residual Salts First Edition; (CEN EN ISO 4524-6: 1994) |
|
ISO 4541 |
Metallic and Other Non-Organic Coatings - Corrodkote Corrosion Test (CORR Test) First Edition; (CEN EN ISO 4541: 1994) |
|
ISO 456 |
Surface Active Agents - Analysis of Soaps - Determination of Free Caustic Alkali-First Edition |
|
ISO 457 |
Soaps - Determination of Chloride Content - Titrimetric Method-Second Edition |
|
ISO 4628-10 |
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 10: Assessment of degree of filiform corrosion-First Edition |
|
ISO 4628-5 |
Paints and Varnishes - Evaluation of Degradation of Coatings - Designation of Quantity and Size of Defects, and of Intesity of Uniform Changes in Appearance - Part 5: Assessment of Degree of Flaking-Second Edition |
|
ISO 4801 |
Glass Alcoholometers and Alcohol Hydrometers Not Incorporating a Thermometer First Edition; (Erratum-1980) |
|
ISO 5280 |
Xylene for Industrial Use - Specification First Edition |
|
ISO 6145-2 |
Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods - Part 2: Volumetric Pumps-First Edition |
|
ISO 649-1 |
Laboratory Glassware - Density Hydrometers for General Purposes - Part 1: Specification-First Edition |
|
ISO 6713 |
Paints and Varnishes - Preparation of Acid Extracts from Paints in Liquid or Powder Form Second Edition; (AS/NZS 1580.501.2: 1994) |
|
ISO 684 |
Analysis of Soaps - Determination of Total Free Alkali-First Edition |
|
ISO 7077 |
Measuring Methods for Building - General Principles and Procedures for the Verification of Dimensional Compliance First Edition |
|
ISO 7361 |
Performance Standards in Building - Presentation of Performance Levels of Facades Made of Same-Source Components First Edition |
|
ISO 7389 |
Building Construction - Jointing Products - Determination of Elastic Recovery of Sealants-Third Edition |
|
ISO 7497 |
Fertilizers - Extraction of Phosphates Soluble in Mineral Acids First Edition |
|
ISO 7504 |
Gas Analysis - Vocabulary-Second Edition |
|
ISO 7579 |
Dyestuffs - Determination of Solubility in Organic Solvents - Gravimetric Method First Edition |
|
ISO 7892 |
Vertical Building Elements - Impact Resistance Tests - Impact Bodies and General Test Procedures First Edition |
|
ISO 8157 |
Fertilizers and Soil Conditioners - Vocabulary First Edition |
|
ISO 8401 |
Metallic Coatings - Review of Methods of Measurement of Ductility First Edition; (CEN EN ISO 8401: 1994) |
|
ISO 8497 |
Thermal Insulation - Determination of Steady-State Thermal Transmission Properties of Thermal Insulation for Circular Pipes First Edition-CEN EN ISO 8497: 1996 |
|
ISO 8799 |
Surface Active Agents - Sulfated Ethoxylated Alcohols and Alkylphenols - Determination of Content of Unsulfated Matter First Edition; (CEN EN ISO 8799: 1995) |
|
ISO 9086-1 |
Wood - Methods of Physical and Mechanical Testing - Vocabulary - Part 1: General Concepts and Macrostructure First Edition |
|
ISO 9380 |
Doorsets - Repeated Torsion Test First Edition |
|
ISO 9597 |
Cements - Test Methods - Determination of Setting Time and Soundness First Edition |
|
ISO 979 |
Sodium Hydroxide for Industrial Use - Method of Assay First Edition |
|
ISO TS 14423 |
Carbonaceous Materials Used in the Production of Aluminium - Cold-Ramming Pastes - Determination of Effective Binder Content and Aggregate Content by Extraction with Quinoline, and Determination of Aggregate Size Distribution-First Edition |
|
ISO TS 22476-11 |
Geotechnical investigation and testing Field testing Part 11: Flat dilatometer test-First edition |
|
ISO TTA 1 |
Advanced Technical Ceramics - Unified Classification System-First Edition |
|
ISO 10722 |
Geosynthetics Index test procedure for the evaluation of mechanical damage under repeated loading Damage caused by granular material-FIrst Edition |
|
ISO 1096 |
Plywood - Classification-Second Edition |
|
ISO 11021 |
Essential Oils - Determination of Water Content - Karl Fischer Method-First Edition |
|
ISO 11024-1 |
Essential Oils - General Guidance on Chromatographic Profiles - Part 1: Preparation of Chromatographic Profiles for Presentation in Standards-First Edition |
|
ISO 11127-3 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning Abrasives - Part 3: Determination of Apparent Density First Edition |
|
ISO 11341 |
Paints and Varnishes - Artificial Weathering and Exposure to Artificial Radiation - Exposure to Filtered Xenon-Arc Radiation-Second Edition |
|
ISO 12465 |
Plywood Specifications-First Edition |
|
ISO 1247 |
Aluminium Pigments for Paints-First Edition; Amendment 1-1982 |
|
ISO 12543-1 |
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 1: Definitions and Description of Componenet Parts-First Edition |
|
ISO 13347-1 CORR 1 |
Industrial fans Determination of fan sound power levels under standardized laboratory conditions Part 1: General overview TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 14917 |
Thermal Spraying - Terminology, Classification-First Edition |
|
ISO 15181-3 |
Paints and varnishes Determination of release rate of biocides from antifouling paints Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract-First Edition |
|
ISO 15822 |
Test method of doorset opening performance in diagonal deformation Seismic aspects-First Edition |
|
ISO 15906 |
Carbonaceous materials for the production of aluminium Baked anodes Determination of the air permeability-First Edition |
|
ISO 16039 |
Road construction and maintenance equipment Slipform pavers Definitions and commercial specifications-First Edition |
|
ISO 16276-2 |
Corrosion protection of steel structures by protective paint systems Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Part 2: Cross-cut testing and X-cut testing-First Edition |
|
ISO 16978 |
Wood-based panels Determination of modulus of elasticity in bending and of bending strength-First Edition |
|
ISO 18515 |
Carbonaceous materials for the production of aluminium Cathode blocks and baked anodes Determination of compressive strength-First Edition |
|
ISO 20202 |
Carbonaceous materials used in the production of aluminium Cold and tepid ramming pastes Preparation of baked test pieces and determination of loss on baking-First Edition |
|
ISO 20501 |
Fine ceramics (advanced ceramics, advanced technical ceramics) Weibull statistics for strength data-First Edition |
|
ISO 2079 |
Surface Treatment and Metallic Coatings - General Classification of Terms-Second Edition |
|
ISO 2131 |
Surface Active Agents - Simplified Classification-First Edition |
|
ISO 22157-1 |
Bamboo Determination of physical and mechanical properties Part 1: Requirements-First Edition |
|
ISO 22214 |
Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) Test Method for Cyclic Bending Fatigue of Monolithic Ceramics at Room Temperature-First Edition |
|
ISO 2227 |
Formaldehyde Solutions for Industrial Use - Determination of Formaldehyde Content-First Edition |
|
ISO 2267 |
Surface Active Agents - Evaluation of Certain Effects of Laundering - Methods of Preparation and Use of Unsoiled Cotton Control Cloth-Third Edition |
|
ISO 22779 |
Metallic coatings Physical vapour-deposited coatings of aluminium Specification and test methods-First Edition |
|
ISO 22965-1 |
Concrete Part 1: Methods of specifying and guidance for the specifier-First Edition |
|
ISO 24235 |
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of particle size distribution of ceramic powders by laser diffraction method-First edition |
|
ISO 2460 |
Sodium Hydrogen Carbonate for Industrial Use - Determination of Iron Content - 1,10-Penanthroline Photometric Method-First Edition |
|
ISO 2461 |
Sodium Chlorate for Industrial Use - Determination of Matter Insoluble in Water-First Edition |
|
ISO 2590 |
General Method for the Determination of Arsenic - Silver Diethyldithiocarbamate Photometric Method-First Edition |
|
ISO 2723 |
Vitreous and Porcelain Enamels for Sheet Steel - Production of Specimens for Testing-Second Edition |
|
ISO 2762 |
Hydrochloric Acid for Industrial Use - Determination of Soluble Sulphates - Turbidimetric Method First Edition |
|
ISO 2831 |
Sodium Fluoride for Industrial Use - Determination of Water-Insoluble Matter First Edition |
|
ISO 3248 |
Paints and Varnishes - Determination of the Effect of Heat-Second Edition |
|
ISO 3443-4 |
Tolerances for Building - Part 4: Method for Predicting Deviations of Assemblies and for Allocation of Tolerances First Edition |
|
ISO 3507 |
Laboratory Glassware - Pyknometers-Second Edition |
|
ISO 3705 |
Sulphur for Industrial Use - Determination of Arsenic Content - Silver Diethyldithiocarbamate Photometric Method First Edition |
|
ISO 3856-3 |
Paints and Varnishes - Determination of |
|
ISO 3856-5 |
Paints and Varnishes - Determination of |
|
ISO 386 |
Liquid-in-Glass Laboratory Thermometers - Principles of Design, Construction and Use-First Edition; |
|
ISO 3898 |
Bases for Design of Structures - Notations - General Symbols-Third Edition |
|
ISO 4311 |
Anionic and Non-Ionic Surface Active Agents - Determination of the Critical Micellization Concentration - Method by Measuring Surface Tension with a Plate, Stirrup or Ring First Edition |
|
ISO 4356 |
Bases for the Design of Structures - Deformations of Buildings at the Serviceability Limit States First Edition; (PNS 1091: 1992) |
|
ISO 4521 |
Metallic Coatings - Electrodeposited Silver and Silver Alloy Coatings for Engineering Purposes First Edition |
|
ISO 4522-3 |
Metallic Coatings - Test Methods for Electrodeposited Silver and Silver Alloy Coatings - Part 3: Determination of the Presence of Residual Salts First Edition |
|
ISO 4524-4 |
Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 4: Determination of Gold Content First Edition |
|
ISO 4794 |
Laboratory Glassware - Methods for Assessing Chemical Resistance of Enamels Used for Colour Coding and Colour Marking-First Edition |
|
ISO 4795 |
Glass for Thermometer Bulbs-First Edition |
|
ISO 4799 |
Laboratory Glassware - Condensers First Edition |
|
ISO 510 |
Red Lead for Paints-First Edition |
|
ISO 5272 |
Toluene for Industrial Use - Specifications First Edition |
|
ISO 5323 |
Solid Wood Parquet and Raw Parquet Blocks - Vocabulary First Edition |
|
ISO 5373 |
Condensed Phosphates for Industrial Use (Including Foodstuffs) - Determination of Calcium Content - Flame Atomic Absorption Spectrometric Method First Edition |
|
ISO 5440 |
Sodium Hexafluorosilicate for Industrial Use - Determination of Phosphate Content - Molybdovanadate Spectrophotometric Method First Edition |
|
ISO 5444 |
Sodium Hexafluorosilicate for Industrial Use - Determination of Loss in Mass at 105 Degrees Celsius First Edition |
|
ISO 591-1 |
Titanium Dioxide Pigments for Paints - Part 1: Specifications and Methods of Tests-First Edition; Replaces ISO 591 |
|
ISO 6145-10 |
Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods - Part 10: Permeation Method-First Edition |
|
ISO 6145-7 |
Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods - Part 7: Thermal Mass-Flow Controllers-First Edition |
|
ISO 6145-8 |
Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 8: Diffusion method-First edition |
|
ISO 6353-2 |
Reagents for Chemical Analysis - Part 2: Specifications - First Series-First Edition; Addendum 2: 1986 |
|
ISO 6745 |
Zinc Phosphate Pigments for Paints - Specifications and Methods of Test First Edition |
|
ISO 6955 |
Analytical Spectroscopic Methods - Flame Emission, Atomic Absorption, and Atomic Fluorescence - Vocabulary First Edition |
|
ISO 6988 |
Metallic and Other Non-Organic Coatings - Sulfur Dioxide Test with General Condensation of Moisture First Edition; (CEN EN ISO 6988: 1994) |
|
ISO 7382 |
Ethylene for Industrial Use - Sampling in the Liquid and the Gaseous Phase First Edition |
|
ISO 7535 |
Surface Active Agents - Detergents for Domestic Machine Dishwashing - Guide for Comparative Testing of Performance First Edition |
|
ISO 7587 |
Electroplated Coatings of Tin-Lead Alloys - Specification and Test Methods First Edition |
|
ISO 7609 |
Essential Oils - Analysis by Gas Chromatography on Capillary Columns - General Method First Edition |
|
ISO 787-13 |
General Methods of Test for Pigments - Part 13: Determination of Water-Soluble Sulfates, Chlorides and Nitrates-Second Edition |
|
ISO 8130-2 |
Coating Powders - Part 2: Determination of Density by Gas Comparison Pyknometer (Refree Method) First Edition |
|
ISO 8213 |
Chemical Products for Industrial Use - Sampling Techniques - Solid Chemical Products in the Form of Particles Varying from Powders to Coarse Lumps First Edition |
|
ISO 8780-1 |
Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 1: Introduction First Edition; (CEN EN ISO 8780-1: 1995) |
|
ISO 8990 |
Thermal Insulation - Determination of Steady-State Thermal Transmission Properties -Calibrated and Guarded Hot Box First Edition-CEN EN ISO 8990: 1996 |
|
ISO 9048 |
Building Construction - Jointing Products - Determination of Extrudability of Sealants Using Standardized Apparatus First Edition |
|
ISO 9882 |
Performance Standards in Building - Performance Test for Precast Concrete Floors - Behaviour Under Non-Concentrated Load First Edition |
|
ISO 9883 |
Performance Standards in Building - Performance Test for Precast Concrete Floors - Behaviour Under Concentrated Load First Edition |
|
ISO TS 17892-11 |
Geotechnical investigation and testing Laboratory testing of soil Part 11: Determination of permeability by constant and falling head-First Edition |
|
ISO TS 17892-2 |
Geotechnical investigation and testing Laboratory testing of soil Part 2: Determination of density of fine-grained soil-First Edition |
|
ISO TS 22476-10 |
Geotechnical investigation and testing Field testing Part 10: Weight sounding test-First edition |
|
ISO 10587 |
Metallic and Other Inorganic Coatings - Test for Residual Embrittlement in both Metallic-Coated and Uncoated Externally-Threaded Articles and Rods - Inclined Wedge Method-First Edition |
|
ISO 1067 |
Analysis of Soaps - Determination of Unsaponifiable, Unsaponified and Unsaponified Saponifiable Matter-First Edition |
|
ISO 11126-3 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning Abrasives - Part 3: Copper Refinery Slag First Edition |
|
ISO 11408 |
Chemical Conversion Coatings - Black Oxide Coating on Iron and Steel - Specification and Test Methods-First Edition |
|
ISO 11432 |
Building construction - Sealants - Determination of resistance to compression-Second Edition |
|
ISO 12986-1 |
Carbonaceous Materials Used in the Production of Aluminium - Prebaked Anodes and Cathode Blocks - Part 1: Determination of Bending/Shear Strength by a Three-Point Method-First Edition |
|
ISO 13787 |
Thermal insulation products for building equipment and industrial installations Determination of declared thermal conductivity-First Edition |
|
ISO 13792 |
Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling Simplified methods-First edition |
|
ISO 13885-1 |
Binders for Paints and Varnishes - Gel Permeation Chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as Eluent-First Edition |
|
ISO 1388-6 |
Ethanol for Industrial Use - Methods of Test - Part 6: Test for Miscibility with Water-First Edition |
|
ISO 13982-2 |
Protective clothing for use against solid particulates Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits-First Edition |
|
ISO 14435 |
Carbonaceous materials for the production of aluminium Petroleum coke Determination of trace metals by inductively coupled plasma atomic emission spectrometry-First Edition |
|
ISO 14707 |
Surface Chemical Analysis - Glow Discharge Optical Emission Spectrometry (GD-OES) - Introduction to Use-First Edition |
|
ISO 150 |
Raw, Refined and Boiled Linseed Oil for Paints and Varnishes - Specifications and Methods of Test-Second Edition |
|
ISO 15490 |
Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for tensile strength of monolithic ceramics at room temperature-Second Edition |
|
ISO 15689 |
Road construction and maintenance equipment Powder binder spreaders Terminology and commercial specifications-First Edition |
|
ISO 15717 |
Kitchen Equipment - Safety Requirements and Test Methods for Kitchen Cabinets and Work Tops-First Edition |
|
ISO 1619 |
Cryolite, Natural and Artificial - Preparation and Storage of Test Samples-First Edition |
|
ISO 16276-1 |
Corrosion protection of steel structures by protective paint systems Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Part 1: Pull-off testing-First Edition |
|
ISO 1692 |
Sodium and Potassium Silicates for Industrial Use - Determination of Total Alkalinity - Titrimetric Method-First Edition |
|
ISO 17331 |
Surface chemical analysis Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy-First Edition |
|
ISO 17382 |
Oil of magnolia flower, China type (Michelia × alba DC)-First Edition |
|
ISO 17834 |
Thermal spraying Coatings for protection against corrosion and oxidation at elevated temperatures-First Edition |
|
ISO 1791 |
Building Construction - Modular Coordination - Vocabulary-Second Edition; PNS 637: 1988 |
|
ISO 20507 |
Fine ceramics (advanced ceramics, advanced technical ceramics) Vocabulary-First Edition |
|
ISO 2074 |
Plywood - Vocabulary-First Edition |
|
ISO 2121 |
Liquid Chlorine for Industrial Use - Determination of Water Content - Gravimetric Method-First Edition |
|
ISO 2197 |
Sodium Hydrogen Carbonate for Industrial Use - List of Methods of Test and Preparation of the Test Sample-First Edition |
|
ISO 2270 |
Non-Ionic Surface Active Agents - Polyethoxylated Derivatives - Iodometric Determination of Oxyethylene Groups-Second Edition |
|
ISO 22778 |
Metallic coatings Physical vapour-deposited coatings of cadmium on iron and steel Specification and test methods-First Edition |
|
ISO 2426-1 |
Plywood - Classification by Surface Appearance - Part 1: General-First Edition; Supersedes ISO 2426: 1974 |
|
ISO 2479 |
Sodium Chloride for Industrial Use - Determination of Matter Insoluble in Water or in Acid and Preparation of Principal Solutions for Other Determinations-First Edition |
|
ISO 2722 |
Vitreous and Porcelain Enamels - Determination of Resistance to Citric Acid at Room Temperature-Second Edition |
|
ISO 2733 |
Vitreous and Porcelain Enamels - Apparatus for Testing with Acid and Neutral Liquids and Their Vapours Second Edition |
|
ISO 2744 |
Vitreous and Porcelain Enamels - Determination of Resistance to Boiling Water and Water Vapour-Third Edition |
|
ISO 2746 |
Vitreous and Porcelain Enamels - Enamelled Articles for Service under Highly Corrosive Conditions - High Voltage Test-Second Edition |
|
ISO 2811-2 |
Paints and Varnishes - Determination of Density - Part 2: Immersed Body (Plummet) Method-First Edition; Replaces ISO 2811 |
|
ISO 2814 |
Paints and Varnishes - Comparison of Contrast Ratio (Hiding Power) of Paints of the Same Type and Colour First Edition |
|
ISO 2832 |
Sodium Fluoride for Industrial Use - Determination of Moisture Content First Edition |
|
ISO 2870 |
Surface Active Agents - Detergents - Determination of Anionic-Active Matter Hydrolyzable and Non-Hydrolyzable Under Acid-Conditions Second Edition |
|
ISO 3139 |
Aqueous Hydrofluoric Acid for Industrial Use - Sampling and Methods of Test-Second Edition; Amendment 1: 1980 |
|
ISO 3270 |
Paints and Varnishes and Their Raw Materials - Temperatures and Humidities for Conditioning and Testing Third Edition |
|
ISO 3497 |
Metallic Coatings - Measurement of Coating Thickness - X-Ray Spectrometric Methods-Third Edition |
|
ISO 3515 CORR 1 |
Oil of Lavender (Lavandula Angustifolia Mill.) TECHNICAL CORRIGENDUM 1-Third Edition |
|
ISO 3549 |
Zinc Dust Pigments for Paints - Specifications and Test Methods Second Edition |
|
ISO 385 |
Laboratory glassware Burettes-First Edition; Replaces ISO 385-1:1984, ISO 385-2:1984, ISO 385-3:1984 |
|
ISO 4315 |
Surface Active Agents - Determination of Alkalinity - Titrimetric Method First Edition |
|
ISO 4319 |
Surface Active Agents - Detergents for Washing Fabrics - Guide for Comparative Testing of Performance First Edition |
|
ISO 4326 |
Non-Ionic Surface Active Agents - Polyethoxylated Derivatives - Determination of Hydroxyl Value - Acetic Anhydride Method First Edition |
|
ISO 4354 |
Wind Actions on Structures-First Edition |
|
ISO 4523 |
Metallic Coatings - Electrodeposited Gold and Gold Alloy Coatings for Engineering Purposes First Edition |
|
ISO 4524-1 |
Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 1: Determination of Coating Thickness First Edition |
|
ISO 4524-3 |
Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 3: Electrographic Tests for Porosity First Edition; (Corrected and Reprinted - 1986) |
|
ISO 4526 |
Metallic coatings Electroplated coatings of nickel for engineering purposes-Second Edition |
|
ISO 4536 |
Metallic and Non-Organic Coatings on Metallic Substrates - Saline Droplets Corrosion Test (SD Test) First Edition |
|
ISO 4620 |
Cadmium Pigments - Specifications and Methods of Test First Edition |
|
ISO 4621 |
Chrome Oxide Green Pigments - Specifications and Methods of Test First Edition |
|
ISO 4622 |
Paints and Varnishes - Pressure Test for Stackability Second Edition; (CEN EN ISO 4622) |
|
ISO 4623-2 |
Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates-First Edition |
|
ISO 4625-1 |
Binders for paints and varnishes Determination of softening point Part 1:Ring-and-ball method-First Edition; Replaces ISO 4625 |
|
ISO 4793 |
Laboratory Sintered (Fritted) Filters - Porosity Grading, Classification and Designation-First Edition |
|
ISO 5314 |
Fertilizers - Determination of Ammoniacal Nitrogen Content - Titrimetric Method After Distillation First Edition |
|
ISO 5329 |
Solid Wood Paving Blocks - Vocabulary First Edition |
|
ISO 592 |
Essential Oils - Determination of Optical Rotation-Second Edition |
|
ISO 5940 |
Carbonaceous Materials for the Production of Aluminium - Pitch for Electrodes - Determination of Softening Point by the Ring-and-Ball Method First Edition |
|
ISO 5993 |
Sodium Hydroxide for Industrial Use - Determination of Mercury Content - Flameless Atomic Absorption Spectrometric Method First Edition |
|
ISO 6206 |
Chemical Products for Industrial Use - Sampling - Vocabulary First Edition |
|
ISO 6227 |
Chemical Products for Industrial Use - General Method for Determination of Chloride Ions - Potentiometric Method First Edition |
|
ISO 6272-2 |
Paints and Varnishes - Rapid-Deformation (Impact Resistance) Tests - Part 2: Falling-Weight Test, Small-Area Indenter-First Edition; Replaces ISO 6272 |
|
ISO 6504-3 |
Paints and varnishes Determination of hiding power Part 3: Determination of contrast ratio of lightcoloured paints at a fixed spreading rate-Second Edition |
|
ISO 6860 |
Paints and varnishes Bend test (conical mandrel)-Second Edition |
|
ISO 697 |
Surface Active Agents - Washing Powders - Determination of Apparent Density - Method by Measuring the Mass of a Given Volume-Second Edition |
|
ISO 7033 |
Fine and Coarse Aggregates for Concrete - Determination of the Particle Mass-per-Volume and Water Absorption - Pyknometer Method First Edition |
|
ISO 7142 |
Binders for paints and varnishes Epoxy resins General methods of test-Second edition |
|
ISO 7252 |
Paints and Varnishes - Determination of Total Mercury - Flameless Atomic Absorption Spectrometric Method First Edition |
|
ISO 746 |
Sodium Carbonate for Industrial Use - Determination of Matter Insoluble in Water at 50 Degrees Celsius-First Edition |
|
ISO 7845 |
Horizontal Joints Between Load-Bearing Walls and Concrete Floors - Laboratory Mechanical Tests - Effect of Vertical Loading and of Moments Transmitted by the Floors First Edition |
|
ISO 787-1 |
General Methods of Test for Pigments and Extenders - Part 1: Comparison of Colour of Pigments-First Edition |
|
ISO 787-17 |
General Methods of Test for Pigments and Extenders - Part 17: Comparison of Lightening Power of White Pigments-Second Edition |
|
ISO 787-18 |
General Methods of Test for Pigments and Extenders - Part 18: Determination of Residue on Sieve - Mechanical Flushing Procedure-Second Edition; CEN EN ISO 787-18: 1995 |
|
ISO 788 |
Ultramarine Pigments for Paints-First Edition |
|
ISO 7976-2 |
Tolerances for Building - Methods of Measurement of Buildings and Building Products - Part 2: Position of Measuring Points First Edition |
|
ISO 8270 |
Doorsets - Soft Heavy Body Impact Test First Edition |
|
ISO 8289 |
Vitreous and Porcelain Enamels - Low Voltage Test for Detecting and Locating Defects-Second Edition |
|
ISO 8563 |
Propylene and Butadiene for Industrial Use - Sampling in the Liquid Phase First Edition |
|
ISO 8780-4 |
Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 4: Dispersion Using a Bead Mill First Edition; (CEN EN ISO 8780-4: 1995) |
|
ISO 9046 |
Building Construction - Jointing Products - Determination of Adhesion/Cohesion Properties of Sealants at Constant Temperature-Second Edition |
|
ISO 9047 |
Building Construction - Jointing Products - Determination of Adhesion/Cohesion Properties of Sealants at Variable Temperatures-Second Edition |
|
ISO 9101 |
Surface Active Agents - Determination of Interfacial Tension - Drop Volume Method First Edition |
|
ISO 9699 |
Performance Standards in Building - Checklist for Briefing - Contents of Brief for Building Design First Edition |
|
ISO TR 14177 |
Classification of Information in the Construction Industry First Edition |
|
ISO TR 896 |
Surface Active Agents - Scientific Classification-First Edition |
|
ISO TS 17892-3 |
Geotechnical investigation and testing Laboratory testing of soil Part 3: Determination of particle density Pycnometer method-First Edition |
|
ISO TS 17892-7 |
Geotechnical investigation and testing Laboratory testing of soil Part 7: Unconfined compression test on fine-grained soil-First Edition |
|
ISO TTA 2 |
Tensile Tests for Discontinuously Reinforced Metal Matrix Composites at Ambient Temperatures-First Edition |
|
ISO 10136-6 |
Glass and Glassware - Analysis of Extract Solutions - Part 6: Determination of Boron(III) Oxide by Molecular Absorption Spectrometry First Edition |
|
ISO 10563 |
Building construction - Sealants - Determination of change in mass and volume-Second Edition |
|
ISO 11126-5 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning Abrasives - Part 5: Nickel Refinery Slag First Edition |
|
ISO 11126-6 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning Abrasives - Part 6: Iron Furnace Slag First Edition |
|
ISO 11126-7 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast-Cleaning Abrasives - Part 7: Fused Aluminium Oxide-First Edition; Technical Corrigendum: 02-15-1999 |
|
ISO 11127-4 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning Abrasives - Part 4: Assessment of Hardness by a Glass Slide Test First Edition |
|
ISO 11886 CORR 1 |
Building construction machinery and equipment Pile driving and extracting equipment Terminology and commercial Specifications-First Edition |
|
ISO 12567-1 |
Thermal Performance of Windows and Doors - Determination of Thermal Transmittance by Hot Box Method - Part 1: Complete Windows and Doors-First Edition |
|
ISO 13370 |
Thermal performance of buildings Heat transfer via the ground Calculation methods-Second Edition |
|
ISO 13789 |
Thermal performance of buildings Transmission and ventilation heat transfer coefficients Calculation method-Second Edition |
|
ISO 1388-8 |
Ethanol for Industrial Use - Methods of Test - Part 8: Determination of Methanol Content (Methanol Contents between 0,10 and 1,50 % (V/V)) - Visual Colorimetric Method-First Edition |
|
ISO 14647 |
Matallic Coatings - Determination of Porosity in Gold Coatings on Metal Substrates - Nitric Acid Vapour Test-First Edition |
|
ISO 15673 |
Guidelines for the simplified design of structural reinforced concrete for buildings-First Edition |
|
ISO 16053 |
Paints and varnishes Coating materials and coating systems for exterior wood Natural weathering test-First Edition |
|
ISO 1693 |
Cryolite, Natural and Artificial - Determination of Fluorine Content - Modified Willard-Winter Method-First Edition |
|
ISO 1804 |
Doors - Terminology-First Edition |
|
ISO 18650-1 |
Building construction machinery and equipment Concrete mixers Part 1: Vocabulary and general specifications-First Edition |
|
ISO 2040 |
Strontium Chromate Pigments for Paints-First Edition |
|
ISO 2068 |
Barium Chromate Pigments for Paints-First Edition |