|
ISO 11338-1 |
Stationary source emissions Determination of gas and particle-phase polycyclic aromatic hydrocarbons Part 1: Sampling-First Edition |
|
ISO 11732 |
Water quality Determination of ammonium nitrogen Method by flow analysis (CFA and FIA) and spectrometric detection-Second Edition |
|
ISO 12083 |
Information and Documentation - Electronic Manuscript Preparation and Markup First Edition |
|
ISO 13406-1 |
Ergonomic Requirements for Work with Visual Displays Based on Flat Panels - Part 1: Introduction-First Edition |
|
ISO 1413 |
Horology - Shock-Resistant Watches-Second Edition |
|
ISO 14520-14 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 14: IG-55 extinguishant-Second Edition |
|
ISO 14594 |
Microbeam analysis Electron probe microanalysis Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy-First Edition |
|
ISO 15226 |
Technical Product Documentation - Life Cycle Model and Allocation of Documents-First Edition |
|
ISO 16 |
Acoustics - Standard Tuning Frequency (Standard Musical Pitch) First Edition (NZS/ISO 16: 1975)-First Edition; NZS/ISO 16: 1975 |
|
ISO 16200-1 |
Workplace air quality Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography Part 1: Pumped sampling method-First Edition |
|
ISO 16735 |
Fire safety engineering Requirements governing algebraic equations Smoke layers-First Edition |
|
ISO 1683 |
Acoustics - Preferred Reference Quantities for Acoustic Levels-First Edition; BS EN 21683; CEN EN 21683: 1994 |
|
ISO 17398 |
Safety colours and safety signs Classification, performance and durability of safety signs-First Edition |
|
ISO 17734-2 |
Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry Part 2: Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives-First Edition |
|
ISO 20347 AMD 1 |
Personal protective equipment Occupational footwear; Amendment 1-First Edition |
|
ISO 2162-1 |
Technical Product Documentation - Springs - Part 1: Simplified Representation-First Edition; CEN EN 2162-1: 1996 |
|
ISO 2162-2 |
Technical Product Documentation - Springs - Part 2: Presentation of Data for Cylindrical Helical Compression Springs-First Edition; CEN EN ISO 2162-2: 1996 |
|
ISO 2162-3 |
Technical Product Documentation - Springs - Part 3: Vocabulary-First Edition; Corrected and Reprinted - 1996; CEN EN ISO 2162-3: 1996 |
|
ISO 21927-2 |
Smoke and heat control systems Part 2: Specification for natural smoke and heat exhaust ventilators-First Edition |
|
ISO 23950 |
Information and Documentation - Information Retrieval (Z39.50) - Application Service Definition and Protocol Specification-First Edition |
|
ISO 3602 |
Documentation - Romanization of Japanese (Kana Script) First Edition |
|
ISO 362-1 |
Measurement of noise emitted by accelerating road vehicles Engineering method Part 1: M and N categories-First Edition |
|
ISO 3901 |
Information and Documentation - International Standard Recording Code (ISRC)-Second Edition |
|
ISO 4872 |
Acoustics - Measurement of Airborne Noise Emitted by Construction Equipment Intended for Outdoor Use - Method for Determining Compliance with Noise Limits First Edition; (Erratum-1979) (SAE J 2101) |
|
ISO 5128 |
Acoustics - Measurement of Noise Inside Motor Vehicles-First Edition |
|
ISO 5135 |
Acoustics - Determination of Sound Power Levels of Noise from Air-Terminal Devices, Air-Terminal Units, Dampers and Valves by Measurement in a Reverberation Room-Second Edition |
|
ISO 5664 |
Water Quality - Determination of Ammonium - Distillation and Titration Method First Edition |
|
ISO 6182-10 |
Fire protection Automatic sprinkler systems Part 10: Requirements and test methods for domestic sprinklers-First Edition |
|
ISO 6182-3 |
Fire protection Automatic sprinkler systems Part 3: Requirements and test methods for dry pipe valves-Second Edition |
|
ISO 6817 |
Measurement of Conductive Liquid Flow in Closed Conduits - Method Using Electromagnetic Flowmeters First Edition-CEN EN ISO 6817: 1995 |
|
ISO 7235 |
Acoustics Laboratory measurement procedures for ducted silencers and air-terminal units Insertion loss, flow noise and total pressure loss-Second Edition |
|
ISO 7574-3 |
Acoustics - Statistical Methods for Determining and Verifying Stated Noise Emission Values of Machinery and Equipment - Part 3: Simple (Transition) Method for Stated Values for Batches of Machines First Edition |
|
ISO 7887 |
Water Quality - Examination and Determination of Colour Second Edition; (CEN EN ISO 7887: 1994) |
|
ISO 9697 |
Water Quality - Measurement of Gross Beta Activity in Non- Saline Water First Edition |
|
ISO IWA 5 |
Emergency preparedness |
|
ISO TR 13387-1 |
Fire Safety Engineering - Part 1: Application of Fire Performance Concepts to Design Objectives-First Edition |
|
ISO TR 3313 |
Measurement of Fluid Flow in Closed Conduits - Guidelines on the Effects of Flow Pulsations on Flow-Measurement Instruments-Third Edition |
|
ISO TS 14505-1 |
Ergonomics of the thermal environment Evaluation of thermal environments in vehicles Part 1: Principles and methods for assessment of thermal stress-First Edition |
|
ISO 10304-4 |
Water Quality - Determination of Dissolved Anions by Liquid Chromatography of Ions - Part 4: Determination of Chlorate, Chloride and Chlorite in Water with Low Contamination-First Edition |
|
ISO 12884 |
Ambient Air - Determination of Total (Gas and Particle-Phase) Polycyclic Aromatic Hydrocarbons - Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analyses-First Edition |
|
ISO 15202-3 |
Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 3: Analysis-First Edition |
|
ISO 2145 |
Documentation - Numbering of Divisions and Subdivisions in Written Documents-Second Edition |
|
ISO 22846-1 |
Personal equipment for protection against falls - Rope access systems - Part 1: Fundamental principles for a system of work-First Edition |
|
ISO 3166-2 |
Codes for the representation of names of countries and their subdivisions Part 2: Country subdivision code-Second Edition |
|
ISO 3455 |
Hydrometry Calibration of currentmeters in straight open tanks-Second Edition |
|
ISO 3747 |
Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Comparison Method in Situ-Second Edition |
|
ISO 389-7 |
Acoustics Reference zero for the calibration of audiometric equipment Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions-Second Edition |
|
ISO 4291 |
Methods for the Assessment of Departure from Roundness - Measurement of Variations in Radius First Edition |
|
ISO 5130 |
Acoustics Measurements of sound pressure level emitted by stationary road vehicles-Second Edition |
|
ISO 5479 |
Statistical Interpretation of Data - Tests for Departure from the Normal Distribution-First Edition |
|
ISO 5667-10 |
Water Quality - Sampling - Part 10: Guidance on Sampling of Waste Waters First Edition |
|
ISO 6412-1 |
Technical Drawings - Simplified Representation of Pipelines - Part 1: General Rules and Orthogonal Representation First Edition; (CEN EN ISO 6412-1: 1994) |
|
ISO 6942 |
Protective Clothing - Protection Against Heat and Fire - Method of Test: Evaluation of Materials and Material Assemblies When Exposed to a Source of Radiant Heat-Third Edition |
|
ISO 8466-2 |
Water Quality - Calibration and Evaluation of Analytical Methods and Estimation of Performance Characteristics - Part 2: Calibration Strategy for Non-Linear Second-Order Calibration Functions-Second Edition |
|
ISO 9239-1 |
Reaction to Fire Tests for Floorings - Part 1: Determination of the Burning Behaviour Using a Radiant Heat Source-Second Edition |
|
ISO 9706 |
Information and Documentation - Paper for Documents - Requirements for Permanence First Edition |
|
ISO TR 13387-5 |
Fire Safety Engineering - Part 5: Movement of Fire Effluents-First Edition |
|
ISO TR 13387-7 |
Fire Safety Engineering - Part 7: Detection, Activation and Suppression-First Edition |
|
ISO TR 4870 |
Acoustics - the Construction and Calibration of Speech Intelligibility Tests First Edition |
|
ISO 10075-3 |
Ergonomic principles related to mental workload Part 3: Principles and requirements concerning methods for measuring and assessing mental workload-First Edition |
|
ISO 10304-1 |
Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate-Second Edition |
|
ISO 10359-1 |
Water Quality - Determination of Fluoride - Part 1: Electrochemical Probe Method for Potable and Lightly Polluted Water First Edition |
|
ISO 10381-8 |
Soil quality Sampling Part 8: Guidance on sampling of stockpiles-First Edition |
|
ISO 10390 |
Soil quality - Determination of pH-Second Edition |
|
ISO 10473 |
Ambient Air - Measurement of the Mass of Particulate Matter on a Filter Medium - Beta-Ray Absorption Method-First Edition |
|
ISO 10846-1 |
Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Resilient Elements - Part 1: Principles and Guidelines-First Edition |
|
ISO 1100-1 |
Measurement of Liquid Flow in Open Channels - Part 1: Establishment and Operation of a Gauging Station-Second Edition |
|
ISO 11108 |
Information and Documentation - Archival Paper - Requirements for Permanence and Durability-First Edition |
|
ISO 11466 |
Soil Quality - Extraction of Trace Elements Soluble in Aqua Regia First Edition |
|
ISO 11731-2 |
Water quality Detection and enumeration of Legionella Part 2: Direct membrane filtration method for waters with low bacterial counts-First Edition |
|
ISO 11733 |
Water quality Determination of the elimination and biodegradability of organic compounds in an aqueous medium Activated sludge simulation test-Second Edition |
|
ISO 11885 |
Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)-Second Edition |
|
ISO 13571 |
Life-threatening components of fire Guidelines for the estimation of time available for escape using fire data-First Edition |
|
ISO 13994 CORR 1 |
Clothing for protection against liquid chemicals Determination of the resistance of protective clothing materials to penetration by liquids under pressure TECHNICAL CORRIGENDUM 1-Second Edition |
|
ISO 14257 |
Acoustics - Measurement and Parametric Description of Spatial Sound Distribution Curves in Workrooms for Evaluation of Their Acoustical Performance-First Edition |
|
ISO 14520-15 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 15: IG-541 extinguishant-Second Edition |
|
ISO 14520-6 |
Gaseous fire-extinguishing systems Physical properties and system design Part 6: HCFC Blend A extinguishant-Second Edition |
|
ISO 14595 |
Microbeam Analysis - Electron Probe Microanalysis - Guidelines for the Specification of Certified Reference Materials (CRMs)-First Edition |
|
ISO 15708-1 |
Non-Destructive Testing - Radiation Methods - Computed Tomography - Part 1: Principles-First Edition |
|
ISO 15919 |
Information and Documentation - Transliteration of Devanagari and Related Indic Scripts into Latin Characters-First Edition |
|
ISO 16200-2 |
Workplace Air Quality - Sampling and Analysis of Voltage Organic Compounds by Solvent Desorption/Gas Chromatography - Part 2: Diffusive Sampling Method-First Edition |
|
ISO 16703 |
Soil quality Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography-First Edition |
|
ISO 16734 |
Fire safety engineering Requirements governing algebraic equations Fire plumes-First Edition |
|
ISO 2023 |
Rubber Footwear - Lined Industrial Vulcanized-Rubber Boots - Specification-Second Edition: Corrigendum 1: 12/15/2002 |
|
ISO 22029 |
Standard file format for spectral data exchange-First Edition |
|
ISO 2788 |
Documentation - Guidelines for the Establishment and Development of Monolingual Thesauri Second Edition |
|
ISO 3098-3 |
Technical Product Documentation - Lettering - Part 3: Greek Alphabet-Second Edition |
|
ISO 3098-6 |
Technical Product Documentation - - Lettering - Part 6: Cyrillic Alphabet-First Edition |
|
ISO 3452-4 |
Non-Destructive Testing - Penetrant Testing - Part 4: Equipment-First Edition; Together with ISO 3452-1, ISO 3452-2 and ISO 3452-3 Cancels and Replaces ISO 3452:1984 |
|
ISO 389-1 |
Acoustics - Reference Zero for the Calibration of Audiometric Equipment - Part 1: Reference Equivalent Threshold Sound Pressure Levels for Pure Tones and Supra-Aural Earphones-First Edition |
|
ISO 4360 |
Liquid Flow Measurement in Open Channels by Weirs and Flumes - Triangular Profile Weirs Second Edition |
|
ISO 497 |
Guide to the Choice of Series of Preferred Numbers and of Series Containing More Rounded Values of Preferred Numbers-First Edition |
|
ISO 5667-12 |
Water Quality - Sampling - Part 12: Guidance on Sampling of Bottom Sediments First Edition |
|
ISO 6426-2 CORR 1 |
Horological vocabulary Part 2: Technical and commercial definitions -Second Edition |
|
ISO 7220 |
Information and Documentation - Presentation of Catalogues of Standards-First Edition; Corrigendum 1 11/15/2001 |
|
ISO 8048 |
Technical Drawings - Construction Drawings - Representation of Views, Sections and Cuts First Edition |
|
ISO 8756 |
Air Quality - Handling of Temperature, Pressure and Humidity Data First Edition |
|
ISO 9 |
Information and Documentation - Transliteration of Cyrillic Characters into Latin Characters - Slavic and Non-Slavic Languages-Second Edition |
|
ISO 9562 |
Water Quality - Determination of Adsorbable Organically Bound Halogens (AOX)-Third Edition |
|
ISO TR 13387-4 |
Fire Safety Engineering - Part 4: Initiation and Development of Fire and Generation of Fire Effluents-First Edition |
|
ISO TR 13387-8 |
Fire Safety Engineering - Part 8: Life Safety - Occupant Behaviour, Location and Condition-First Edition |
|
ISO TS 16071 |
Ergonomics of Human-System Interaction - Guidance on Accessibility for Human-Computer Interfaces-First Edition |
|
ISO TS 16489 CORR 1 |
Water quality Guidance for establishing the equivalency of results TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 10381-2 |
Soil Quality - Sampling - Part 2: Guidance on Sampling Techniques-First Edition |
|
ISO 10444 |
Information and Documentation - International Standard Technical Report Number (ISRN) First Edition |
|
ISO 10553 |
Horology - Procedure for Evaluating the Accuracy of Quartz Watches-First Edition; Replaces ISO TR 10553 |
|
ISO 10843 |
Acoustics - Methods for the Description and Physical Measurement of Single Impulses or Series of Impulses-First Edition |
|
ISO 11203 |
Acoustics - Noise Emitted by Machinery and Equipment - Determination of Emission Sound Pressure Levels at a Work Station and at Other Specified Positions from the Sound Power Level (CEN EN ISO 11204: 1995) |
|
ISO 11423-2 |
Water Quality - Determination of Benzene and Some Derivatives - Part 2: Method Using Extration and Gas Chromatography-First Edition |
|
ISO 11465 |
Soil Quality - Determination of Dry Matter and Water Content on a Mass Basis - Gravimetric Method-First Edition; Corrigendum 1: 1994 |
|
ISO 11564 |
Stationary Source Emissions - Determination of the Mass Concentration of Nitrogen Oxides - Naphthylethylenediamine Photometric Method-First Edition; Corrigendum 1 04/01/2000 |
|
ISO 11690-2 |
Acoustics - Recommended Practice for the Design of Low-Noise Workplaces Containing Machinery - Part 2: Noise Control Measures First Edition |
|
ISO 11691 |
Acoustics - Measurement of Insertion Loss of Ducted Silencers without Flow - Laboratory Survey Method First Edition; (Corrected and Reprinted - 1995) |
|
ISO 11798 |
Information and Documentation - Permanence and Durability of Writing, Printing and Copying on Paper - Requirements and Test Methods-First Edition |
|
ISO 11843-3 |
Capability of detection Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used-First Edition |
|
ISO 12756 |
Drawing and Writing Instruments - Ball Point Pens and Roller Ball Pens - Vocabulary-First Edition |
|
ISO 13473-3 |
Characterization of pavement texture by use of surface profiles Part 3: Specification and classification of profilometers-First edition |
|
ISO 1438-1 |
Water Flow Measurement in Open Channels Using Weirs and Venturi Flumes - Part 1: Thin-Plate Weirs-First Edition; Amendment 1-1998 |
|
ISO 14403 |
Water Quality - Determination of Total Cyanide and Free Cyanide by Continuous Flow Analysis-First Edition |
|
ISO 14416 |
Information and documentation Requirements for binding of books, periodicals, serials and other paper documents for archive and library use Methods and materials-First Edition |
|
ISO 15186-2 |
Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 2: Field measurements-First Edition |
|
ISO 15202-2 |
Workplace Air - Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry - Part 2: Sample Preparation-First Edition |
|
ISO 15667 |
Acoustics - Guidelines for Noise Control by Enclosures and Cabins-First Edition |
|
ISO 15706 |
Information and Documentation - International Standard Audiovisual Number (ISAN)-First Edition |
|
ISO 15712-2 |
Building acoustics Estimation of acoustic performance of buildings from the performance of elements Part 2: Impact sound insulation between rooms-First Edition |
|
ISO 17 |
Guide to the Use of Preferred Numbers and of Series of Preferred Numbers-First Edition; PNS 400: 1991 |
|
ISO 17294-2 |
Water quality Application of inductively coupled plasma mass spectrometry (ICP-MS) Part 2: Determination of 62 elements-First Edition |
|
ISO 17933 |
GEDI - Generic Electronic Document Interchange-First Edition |
|
ISO 18 |
Documentation - Contents List of Periodicals-First Edition |
|
ISO 18749 |
Water quality Adsorption of substances on activated sludge Batch test using specific analytical methods-First Edition |
|
ISO 19706 |
Guidelines for assessing the fire threat to people-First edition |
|
ISO 2108 |
Information and documentation - International Standard Book Number (ISBN)-Fourth edition |
|
ISO 22610 |
Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment Test method to determine the resistance to wet bacterial penetration-First edition |
|
ISO 22892 |
Soil quality Guidelines for the identification of target compounds by gas chromatography and mass spectrometry-First Edition |
|
ISO 3158 |
Timekeeping Instruments - Symbolization of Control Positions First Edition |
|
ISO 3159 |
Timekeeping Instruments - Wrist-Chronometers with Spring Balance Oscillator First Edition |
|
ISO 3381 |
Railway applications Acoustics Measurement of noise inside railbound vehicles-Second Edition |
|
ISO 3952-1 |
Kinematic Diagrams - Graphical Symbols - Part 1-First Edition; Amendment 1: 10/15/2002 |
|
ISO 4869-2 |
Acoustics Hearing protectors Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn-First Edition; Technical Corrigendum 1: 09/15/2006 |
|
ISO 5658-4 |
Reaction to Fire Tests - Spread of Flame - Part 4: Intermediate-Scale Test of Vertical Spread of Flame with Vertically Oriented Specimen-First Edition |
|
ISO 5667-13 |
Water Quality - Sampling - Part 13: Guidance on Sampling of Sludges from Sewage and Water Treatment Works-First Edition |
|
ISO 5667-18 |
Water Quality - Sampling - Part 18: Guidance on Sampling of Groundwater at Contaminated Sites-First Edition |
|
ISO 6396 |
Acoustics - Measurement at the Operator´s Position of Noise Emitted by Earth-Moving Machinery - Dynamic Test Conditions First Edition |
|
ISO 6412-2 |
Technical Drawings - Simplified Representation of Pipelines - Part 2: Isometric Projection First Edition; (CEN EN ISO 6412-2: 1994) |
|
ISO 6926 |
Acoustics - Requirements for the Performance and Calibration of Reference Sound Sources Used for the Determination of Sound Power Levels-Second Edition; Corrected and Reprinted 12/01/2000 |
|
ISO 7144 |
Documentation - Presentation of Theses and Similar Documents First Edition |
|
ISO 7275 |
Documentation - Presentation of Title Information of Series First Edition |
|
ISO 7346-2 |
Water Quality - Determination of the Acute Lethal Toxicity of Substances to a Freshwater Fish (Brachydanio Rerio Hamilton-Buchanan (Teleostei, Cyprinidae)) - Part 2: Semi-Static Method Second Edition |
|
ISO 8265 |
Water Quality - Design and Use of Quantitative Samplers for Benthic Macro-Invertebrates on Stony Substrata in Shallow Freshwaters First Edition; (CEN EN 28265: 1994) |
|
ISO 8297 |
Acoustics - Determination of Sound Power Levels of Multisource Industrial Plants for Evaluation of Sound Pressure Levels in the Environment - Engineering Method First Edition |
|
ISO 9359 |
Air Quality - Stratified Sampling Method for Assessment of Ambient Air Quality First Edition |
|
ISO 9439 |
Water Quality - Evaluation of Ultimate Biodegradability of Organic Compounds in Aqueous Medium - Carbon Dioxide Evolution Test-Second Edition |
|
ISO 9701 |
Wrist and Pocket Watches - Fitting Diameters for Hour, Minute and Second Hands First Edition |
|
ISO GUIDE 47 |
Presentation of Translations of ISO Publications-First Edition |
|
ISO TR 11941 |
Information and Documentation - Transliteration of Korean Script into Latin Characters-First Edition |
|
ISO TS 15666 |
Acoustics - Assessment of Noise Annoyance by Means of Social and Socio-Acoustic Surveys-First Edition |
|
ISO TS 20646-1 |
Ergonomic procedures for the improvement of local muscular workloads Part 1: Guidelines for reducing local muscular workloads-First Edition |
|
ISO 10260 |
Water Quality - Measurement of Biochemical Parameters - Spectrometric Determination of the Chlorophyll-a Concentration First Edition |
|
ISO 10294-5 |
Fire resistance tests - Fire dampers for air distribution systems - Part 5: Intumescent fire dampers-First edition |
|
ISO 10498 |
Ambient air Determination of sulfur dioxide Ultraviolet fluorescence method-First Edition |
|
ISO 10534-1 |
Acoustics - Determination of Sound Absorption Coefficient and Impedance in Impedance Tubes - Part 1: Method Using Standing Wave Ratio-First Edition |
|
ISO 10846-2 |
Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Resilient Elements - Part 2: Dynamic Stiffness of Elastic Supports for Translatory Motion - Direct Method-First Edition |
|
ISO 11074 CORR 1 |
Soil quality Vocabulary TECHNICAL CORRIGENDUM 1-First Edition; Technical Corrigendum 1: 9/15/2006 |
|
ISO 11602-2 |
Fire Protection - Portable and Wheeled Fire Extinguishers - Part 2:Inspection and Maintenance-First Edition |
|
ISO 11632 |
Stationary Source Emissions - Determination of Mass Concentration of Sulfur Dioxide - Ion Chromatography Method-First Edition |
|
ISO 13287 |
Personal protective equipment Footwear Test method for slip resistance-First Edition;:1993 |
|
ISO 13344 |
Estimation of the lethal toxic potency of fire effluents-Second Edition |
|
ISO 13964 |
Air Quality - Determination of Ozone in Ambient Air - Ultraviolet Photometric Method-First Edition |
|
ISO 14368-2 |
Mineral and Sapphire Watch-Glasses - Part 2: Assembly to the Case by Adhesive or Using a Gasket-First Edition |
|
ISO 14520-11 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 11: HFC 236fa extinguishant-Second Edition |
|
ISO 14520-13 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 13: IG-100 extinguishant-Second Edition |
|
ISO 14934-2 |
Fire Tests Calibration and Use of Heat Flux Meters Part 2: Primary Calibration Methods-First Edition |
|
ISO 15202-1 |
Workplace Air - Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry - Part 1: Sampling-First Edition |
|
ISO 15713 |
Stationary source emissions Sampling and determination of gaseous fluoride content-First Edition |
|
ISO 16312-1 |
Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 1: Criteria-First Edition;: 2004 |
|
ISO 20282-1 |
Ease of operation of everyday products Part 1: Design requirements for context of use and user characteristics-First Edition |
|
ISO 20346 AMD 1 |
Personal protective equipment Protective footwear AMENDMENT 1-First Edition |
|
ISO 21927-3 |
Smoke and heat control systems Part 3: Specification for powered smoke and heat exhaust ventilators-First Edition |
|
ISO 233-3 |
Information and Documentation - Transliteration of Arabic Characters into Latin Characters - Part 3: Persian Language - Simplified Transliteration-First Edition |
|
ISO 2603 |
Booths for Simultaneous Interpretation - General Characteristics and Equipment-Third Edition |
|
ISO 2922 |
Acoustics - Measurement of Airborne Sound Emitted by Vessels on Inland Waterways and Harbours-Second Edition |
|
ISO 2923 |
Acoustics - Measurement of Noise on Board Vessels-Second Edition; Technical Corrigendum 1-1997 |
|
ISO 3166-3 |
Codes for the Representation of Names of Countries and Their Subdivisions - Part 3: Code for Formerly Used Names of Countries-First Edition; Replaces ISO 3166 |
|
ISO 3301 |
Statistical Interpretation of Data - Comparison of Two Means in the Case of Paired Observations First Edition |
|
ISO 389-5 |
Acoustics Reference zero for the calibration of audiometric equipment Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz-First Edition;:1998 |
|
ISO 3941 |
Classification of Fires-Second Edition |
|
ISO 4064-2 |
Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 2: Installation requirements-Third Edition; Replaces ISO 7858-2:2000 |
|
ISO 4064-3 |
Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 3: Test methods and equipment-Third Edition; Replaces ISO 7858-3:1992 |
|
ISO 6161 |
Personal Eye-Protectors - Filters and Eye-Protectors Against Laser Radiation First Edition; (Amendment Slip-1982) |
|
ISO 6341 |
Water Quality - Determination of the Inhibition of the Mobility of Daphnia Magna Straus (Cladocera, Crustacea) - Acute Toxicity Test-Third Edition; Technical Corrigendum 1-1998 |
|
ISO 6768 |
Ambient Air - Determination of the Mass Concentration of Nitrogen Dioxide - Modified Griess-Saltzman Method-Second Edition |
|
ISO 6777 |
Water Quality - Determination of Nitrite - Molecular Absorption Spectrometric Method First Edition; (CEN EN 26777: 1993) |
|
ISO 7203-1 |
Fire Extinguishing Media - Foam Concentrates - Part 1: Specification for Low Expansion Foam Concentrates for Top Application to Water-Immiscible Liquids First Edition |
|
ISO 7240-16 |
Fire detection and alarm systems Part 16: Sound system control and indicating equipment-First Edition |
|
ISO 7393-2 |
Water Quality - Determination of Free Chlorine and Total Chlorine - Part 2: Colorimetric Method Using N,N-Diethyl-1,4- Phenylenediamine, for Routine Control Purposes First Edition |
|
ISO 7935 |
Stationary Source Emissions - Determination of the Mass Concentration of Sulphur Dioxide - Performance Characteristics of Automated Measuring Methods First Edition |
|
ISO 7996 |
Ambient Air - Determination of the Mass Concentration of Nitrogen Oxides - Chemiluminescence Method First Edition |
|
ISO 8288 |
Water Quality - Determination of Cobalt, Nickel, Copper, Zinc, Cadmium and Lead - Flame Atomic Absorption Spectrometric Methods First Edition |
|
ISO 8579-1 |
Acceptance Code for Gears - Part 1: Test Code for Airborne Sound-Second Edition |
|
ISO 8996 |
Ergonomics of the thermal environment Determination of metabolic rate-Second Edition |
|
ISO 9151 |
Protective Clothing Against Heat and Flame - Determination of Heat Transmission on Exposure to Flame First Edition |
|
ISO 9308-3 |
Water Quality - Detection and Enumeration of Escherichia Coli and Coliform Bacteria in Surface and Waste Water - Part 3: Miniaturized Method (Most Probable Number) by Inoculation in a Liquid Medium-First Edition; Corrigendum 1: 2000 |
|
ISO 9408 |
Water Quality - Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium by Determination of Oxygen Demand in a Closed Respirometer-Second Edition |
|
ISO 9487 |
Workplace Air - Determination of Vaporous Aromatic Hydrocarbons - Charcoal Tube/Solvent Desorption/ Gas Chromatographic Method First Edition |
|
ISO 9964-1 |
Water Quality - Determination of Sodium and Potassium - Part 1: Determination of Sodium by Atomic Absorption Spectrometry First Edition |
|
ISO 9964-2 |
Water Quality - Determination of Sodium and Potassium - Part 2: Determination of Potassium by Atomic Absorption Spectrometry First Edition |
|
ISO TR 11688-1 |
Acoustics - Recommended Practice for the Design of Low-Noise Machinery and Equipment - Part 1: Planning First Edition |
|
ISO TR 11690-3 |
Acoustics - Recommended Practice for the Design of Low-Noise Workplaces Containing Machinery - Part 3: Sound Propagation and Noise Prediction in Workrooms-First Edition |
|
ISO TR 13387-2 |
Fire Safety Engineering - Part 2: Design Fire Scenarios and Design Fires-First Edition |
|
ISO TR 20983 |
Information and documentation Performance indicators for electronic library services-First Edition |
|
ISO TR 7003 |
Unified Format for the Designation of Metals-First Edition |
|
ISO TS 13571 |
Life-Threatening Components of Fire - Guidelines for the Estimation of Time Available for Escape Using Fire Data-First Edition |
|
ISO 10302 |
Acoustics - Method for the Measurement of Airborne Noise Emitted by Small Air-Moving Devices-First Edition |
|
ISO 10530 |
Water Quality - Determination of Dissolved Sulfide - Photometric Method Using Methylene Blue First Edition |
|
ISO 10844 |
Acoustics - Specification of Test Tracks for the Purpose of Measuring Noise Emitted by Road Vehicles First Edition |
|
ISO 10846-4 |
Acoustics and vibration Laboratory measurement of vibro-acoustic transfer properties of resilient elements Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion-First Edition |
|
ISO 11074-1 |
Soil Quality - Vocabulary Part 1: Terms and Definitions Relating to the Protection and Pollution of the Soil First Edition |
|
ISO 11079 |
Ergonomics of the thermal environment Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects-First Edition |
|
ISO 11648-2 |
Statistical Aspects of Sampling from Bulk Materials - Part 2: Sampling of Particulate Materials-First Edition |
|
ISO 11843-4 |
Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value-First Edition |
|
ISO 12757-2 |
Ball Point Pens and Refills - Part 2: Documentary Use (DOC)-First Edition |
|
ISO 13472-1 |
Acoustics - Measurement of Sound Absorption Properties of Road Surfaces in Situ - Part 1: Extended Surface Method-First Edition |
|
ISO 14460 |
Protective Clothing for Automobile Racing Drivers - Protection Against Heat and Flame - Performance Requirements and Test Methods-First Edition; Amendment 1: 03/15/2002 |
|
ISO 14520-10 |
Gaseous fire-extinguishing systems - Physical properties and system design - HFC 23 extinguishant-Second Edition |
|
ISO 14520-12 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 12: IG-01 extinguishant-Second Edition |
|
ISO 14520-2 |
Gaseous fire-extinguishing systems Physical properties and system design Part 2: CF3I extinguishant-Second Edition |
|
ISO 14966 CORR 1 |
Ambient air Determination of numerical concentration of inorganic fibrous particles Scanning electron microscopy method TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 15537 |
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs-First Edition |
|
ISO 15680 |
Water quality Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption-First Edition |
|
ISO 15708-2 |
Non-Destructive Testing - Radiation Methods - Computed Tomography - Part 2: Examination Practices-First Edition |
|
ISO 16000-8 |
Indoor air Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions-First Edition |
|
ISO 16017-2 |
Indoor, Ambient and Workplace Air - Sampling and Analysis of Volatile Organic Compounds by Sorbent Tube/Thermal Desorption/Capillary Gas Chromatography - Part 2: Diffusive Sampling-First Edition |
|
ISO 16508 |
Road Traffic Lights - Photometric Properties of 200 mm Roundel Signals-First Edition; CIE S 006.1/E; Corrected and Reprinted: 11-15-2000 |
|
ISO 17734-1 |
Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry Part 1: Isocyanates using dibutylamine derivatives-First Edition |
|
ISO 2709 |
Information and Documentation - Format for Information Exchange Third Edition |
|
ISO 3098-4 |
Technical Product Documentation - Lettering - Part 4: Diacritical and Particular Marks for the Latin Alphabet-Second Edition |
|
ISO 3160-2 |
Watch-cases and accessories Gold alloy coverings Part 2: Determination of fineness, thickness, corrosion resistance and adhesion-Third Edition |
|
ISO 3494 |
Statistical Interpretation of Data - Power of Tests Relating to Means and Variances First Edition |
|
ISO 4064-1 |
Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 1: Specifications-Third Edition; Replaces ISO 7858-1:1998 and ISO 10385-1:2000 |
|
ISO 4226 |
Air quality General aspects Units of measurement-Third edition |
|
ISO 5456-3 |
Technical Drawings - Projection Methods - Part 3: Axonometric Representations First Edition |
|
ISO 5667-6 |
Water Quality - Sampling - Part 6: Guidance on sampling of rivers and streams-Second Edition |
|
ISO 5845-2 |
Technical Drawings - Simplified Representation of the Assembly of Parts with Fasteners - Part 2: Rivets for Aerospace Equipment First Edition |
|
ISO 6059 |
Water Quality - Determination of the Sum of Calcium and Magnesium - EDTA Titrimetric Method First Edition |
|
ISO 6410-3 |
Technical Drawings - Screw Threads and Threaded Parts - Part 3: Simplified Representation-First Edition |
|
ISO 6412-3 |
Technical Drawings - Simplified Representation of Pipelines - Part 3: Terminal Features of Ventilation and Drainage Systems First Edition; (CEN EN ISO 6412-3: 1996) |
|
ISO 6425 |
Divers´ Watches Third Edition |
|
ISO 7875-1 |
Water Quality - Determination of Surfactants - Part 1: Determination of Anionic Surfactants by Measurement of the Methylene Blue Index (MBAS)-Second Edition; Corrigendun 1, 7/1/2003 |
|
ISO 7890-3 |
Water Quality - Determination of Nitrate - Part 3: Spectrometric Method Using Sulfosalicylic Acid First Edition |
|
ISO 7981-1 |
Water quality - Determination of polycyclic aromatic hydrocarbons (PAH) - Part 1: Determination of six PAH by highperformance thin-layer chromatography with fluorescence detection after liquid-liquid extraction-First Edition |
|
ISO 8192 |
Water quality Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation-Second Edition |
|
ISO 8253-2 |
Acoustics - Audiometric Test Methods - Part 2: Sound Field Audiometry with Pure Tone and Narrow-Band Test Signals First Edition |
|
ISO 8421-3 |
Fire Protection - Vocabulary - Part 3: Fire Detection and Alarm First Edition |
|
ISO 8459-1 |
Documentation - Bibliographic Data Element Directory - Part 1: Interloan Applications First Edition-AS/NZS 4450.1: 1997 |
|
ISO 9185 |
Protective clothing Assessment of resistance of materials to molten metal splash-Second Edition |
|
ISO 9222-1 |
Technical Drawings - Seals for Dynamic Application - Part 1: General Simplified Representation First Edition; (Corrected and Reprinted -1989) (CEN EN ISO 9222-1:1995) |
|
ISO 9612 |
Acoustics - Guidelines for the Measurement and Assessment of Exposure to Noise in a Working Environment-First Edition |
|
ISO 9696 |
Water quality Measurement of gross alpha activity in non-saline water Thick source method-Second Edition |
|
ISO 9707 |
Information and Documentation - Statistics on the Production and Distribution of Books, Newspapers, Periodicals and Electronic Publications First Edition (CEN EN ISO 9707 : 1994) |
|
ISO TR 13387-3 |
Fire Safety Engineering - Part 3: Assessment and Verification of Mathematical Fire Models-First Edition |
|
ISO TR 13387-6 |
Fire Safety Engineering - Part 6: Structural Response and Fire Spread Beyond the Enclosure of Origin-First Edition |
|
ISO TR 15462 |
Water quality Selection of tests for biodegradability-Second Edition |
|
ISO TR 18529 |
Ergonomics - Ergonomics of Human-System Interaction - Human-Centred Lifecycle Process Descriptions-First Edition |
|
ISO TR 19033 |
Technical Product Documentation - Metadata for Construction Documentation-Fisrt Edition |
|
ISO TR 22898 |
Review of outputs for fire containment tests for buildings in the context of fire safety engineering-First Edition |
|
ISO TR 4869-5 |
Acoustics Hearing protectors Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects-First Edition |
|
ISO 10052 |
Acoustics Field measurements of airborne and impact sound insulation and of service equipment sound Survey method-First Edition |
|
ISO 10253 |
Water Quality - Marine Algal Growth Inhibition Test with Skeletonema Costatum and Phaeodactylum Tricornutum-Second Edition |
|
ISO 10634 |
Water Quality - Guidance for the Preparation and Treatment of Poorly Water-Soluble Organic Compounds for the Subsequent Evaluation of Their Biodegradability in an Aqueous Medium First Edition (CEN EN ISO 10634: 1995) |
|
ISO 10694 |
Soil Quality - Determination of Organic and Total Carbon After Dry Combustion (Elementary Analysis) First Edition |
|
ISO 11074-4 |
Soil Quality - Vocabulary - Part 4: Terms and Definitions Related to the Rehabilitation of Soils and Sites-First Edition |
|
ISO 12706 |
Non-Destructive Testing - Terminology - Terms Used in Penetrant Testing-First Edition |
|
ISO 12819 |
Methods of Evaluation of the Battery Life of a Battery-Powered Watch-First Edition; Corrigendum 1: 11-01-99 |
|
ISO 13752 |
Air Quality - Assessment of Uncertainty of a Measurement Method under Field Conditions Using a Second Method as Reference-First Edition |
|
ISO 14010 |
Guidelines for Environmental Auditing - General Principles-First Edition |
|
ISO 14145-2 |
Roller Ball Pens and Refills - Part 2: Documentary Use (DOC)-First Edition |
|
ISO 14163 |
Acoustics - Guidelines for Noise Control by Silencers-First Edition |
|
ISO 14255 |
Soil Quality - Determination of Nitrate Nitrogen, Ammonium Nitrogen and Total Soluble Nitrogen in Air-Dry Soils Using Calcium Chloride Solution as Extractant-First Edition |
|
ISO 14505-3 |
Ergonomics of the thermal environment Evaluation of thermal environments in vehicles Part 3: Evaluation of thermal comfort using human subjects-First Edition |
|
ISO 14915-1 |
Software ergonomics for multimedia user interfaces Part 1: Design principles and framework-First Edition |
|
ISO 14915-2 |
Software ergonomics for multimedia user interfaces Part 2: Multimedia navigation and control-First Edition |
|
ISO 14956 |
Air Quality - Evaluation of the Suitability of a Measurement Pr4ocedure by Comparison with a Required Measurement Uncertainty-First Edition |
|
ISO 14965 |
Air Quality - Determination of Total Non-Methane Organic Compounds - Cryogenic Preconcentration and Direct Flame Ionization Detection Method-First Edition |
|
ISO 15186-1 |
Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements Using Sound Intensity - Part 1: Laboratory Measurements-First Edition |
|
ISO 15383 |
Protective Gloves for Firefighters - Laboratory Test Methods and Performance Requirements-First Edition |
|
ISO 15535 |
General requirements for establishing anthropometric databases-Second Edition |
|
ISO 15839 |
Water quality On-line sensors/analysing equipment for water Specifications and performance tests-First Edition |
|
ISO 16588 AMD 1 |
Water quality Determination of six complexing agents Gas-chromatographic method AMENDMENT 1-First Edition |
|
ISO 16740 |
Workplace air Determination of hexavalent chromium in airborne particulate matter Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide-First Edition |
|
ISO 17994 |
Water quality Criteria for establishing equivalence between microbiological methods-First Edition |
|
ISO 18073 |
Water quality Determination of tetra- to octa-chlorinated dioxins and furans Method using isotope dilution HRGC/HRMS-First Edition |
|
ISO 21427-2 |
Water quality Evaluation of genotoxicity by measurement of the induction of micronuclei Part 2: Mixed population method using the cell line V79-First Edition |
|
ISO 22155 |
Soil quality Gas chromatographic quantitative determination of volatile aromatic and halogenated hydrocarbons and selected ethers Static headspace method-First Edition |
|
ISO 22609 |
Clothing for protection against infectious agents Medical face masks Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected)-First Edition |
|
ISO 23631 |
Water quality Determination of dalapon, trichloroacetic acid and selected haloacetic acids Method using gas chromatography (GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization-First Edition |
|
ISO 2425 |
Measurement of Liquid Flow in Open Channels Under Tidal Conditions-Second Edition; AMENDMENT 1: 12/01/2003 |
|
ISO 3009 |
Fire-resistance tests Elements of building construction Glazed elements-Second Edition |
|
ISO 3822-2 |
Acoustics - Laboratory Tests on Noise Emission from Appliances and Equipment Used in Water Supply Installations - Part 2: Mounting and Operating Conditions for Draw-Off Taps and Mixing Valves Second Edition; (CEN EN ISO 3822-2: 1995) |
|
ISO 3822-4 |
Acoustics - Laboratory Tests on Noise Emission from Appliances and Equipment Used in Water Supply Installations - Part 4: Mounting and Operating Conditions for Special Appliances-Second Edition |
|
ISO 3952-4 |
Kinematic Diagrams - Graphical Symbols - Part 4 First Edition |