|
ISO 8501-1 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Visual Assessment of Surface Cleanliness - Part 1: Rust Grades and Preparation Grades of Uncoated Steel Substrates and of Steel Substrates After Overall Removal of Previous Coatings-Second Edition |
|
ISO 16812 |
Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers-Second Edition |
|
ISO 13706 |
Petroleum, petrochemical and natural gas industries Air-cooled heat exchangers-Second Edition |
|
ISO 5817 CORR 1 |
Welding Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) Quality levels for imperfections TECHNICAL CORRIGENDUM 1-Second Edition |
|
ISO 8528-1 |
Reciprocating internal combustion engine driven alternating current generating sets Part 1: Application, ratings and performance-Second Edition |
|
ISO 3046-1 |
Reciprocating Internal Combustion Engines - Performance - Part 1: Declarations of Power, Fuel and Lubricating Oil Consumptions, and Test Methods - Additional Requirements for Engines for General Use-Fifth Edition |
|
ISO 10816-4 |
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 4: Gas Turbine Driven Sets Excluding Aircraft Derivatives-First Edition |
|
ISO 8501-2 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Visual Assessment of Surface Cleanliness - Part 2: Preparation Grades of Previously Coated Steel Substrates After Localized Removal of Previous Coatings First Edition |
|
ISO 2314 |
Gas Turbines - Acceptance Tests-Second Edition; Corrigendum 1-1997; Amendment 1-1997 |
|
ISO 8528-5 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets-Second Edition |
|
ISO 3046-4 |
Reciprocating Internal Combustion Engines - Part 4: Speed Governing-Second Edition |
|
ISO 10816-5 |
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 5: Machine Sets in Hydraulic Power Generating and Pumping Plants-First Edition |
|
ISO 10437 |
Petroleum, petrochemical and natural gas industries Steam turbines Special-purpose applications-Second Edition |
|
ISO 2553 |
Welded, Brazed and Soldered Joints - Symbolic Representation on Drawings-Third Edition; Includes Draft Addendum 1 |
|
ISO 8301 |
Thermal Insulation - Determination of Steady- State Thermal Resistance and Related Properties - Heat Flow Meter Apparatus First Edition; |
|
ISO 1461 |
Hot Dip Galvanized Coatings on Fabricated Iron and Steel Articles - Specifications and Test Method-Second Edition |
|
ISO 8501-4 |
Preparation of steel substrates before application of paints and related products Visual assessment of surface cleanliness Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting-First Edition |
|
ISO 8501-3 |
Preparation of steel substrates before application of paints and related products Visual assessment of surface cleanliness Part 3: Preparation grades of welds, edges and other areas with surface imperfections-Second Edition |
|
ISO 15614-1 CORR 1 |
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 15926-2 |
Industrial automation systems and integration Integration of life-cycle data for process plants including oil and gas production facilities Part 2: Data model-First Edition |
|
ISO 4063 |
Welding and Allied Processes - Nomenclature of Processes and Reference Numbers-Third Edition |
|
ISO 15926-1 |
Industrial automation systems and integration Integration of life-cycle data for process plants including oil and gas production facilities Part 1: Overview and fundamental principles-First Edition |
|
ISO 3511-I |
Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part I: Basic Requirements First Edition |
|
ISO 10303-1 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1: Overview and Fundamental Principles First Edition |
|
ISO 3046-6 |
Reciprocating Internal Combustion Engines - Performance - Part 6: Overspeed Protection-Third Edition; Corrected and Reprinted 12/15/1991 |
|
ISO 10303-203 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 203: Application Protocol: Configuration Controlled Design-First Edition; Technical Corrigendum 1: 03/15/1995; Technical Corrigendum 2: 12/15/1998; Amendment 1: 11/01/2000; Technical Corrigendum 3: 02/15/2004 |
|
ISO 13920 |
Welding - General Tolerances for Welded Constructions - Dimensions for Lengths and Angles - Shape and Position First Edition-CEN EN ISO 13 920: 1996 |
|
ISO 15607 CORR 1 |
Specification and qualification of welding procedures for metallic materials General rules TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 15609-1 CORR 1 |
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 3046-3 |
Reciprocating Internal Combustion Engines - Performance - Part 3: Test Measurements-Third Edition |
|
ISO 8178-1 |
Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement of gaseous and particulate exhaust emissions-Second Edition |
|
ISO 3511-3 |
Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 3: Detailed Symbols for Instrument Interconnection Diagrams First Edition |
|
ISO 7919-4 |
Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria - Part 4: Gas Turbine Sets First Edition |
|
ISO 8502-3 |
Preparation of Steel Substrates Before Application of Paint and Related Products - Tests for the Assessment of Surface Cleanliness - Part 3: Assessment of Dust on Steel Surfaces Prepared for Painting (Pressure-Sensitive Tape Method) First Edition; (Corrected and Reprinted - 1993) |
|
ISO 4520 |
Chromate Conversion Coatings on Electroplated Zinc and Cadmium Coatings First Edition; (PNS 680: 1990) |
|
ISO 230-1 |
Test Code for Machine Tools - Part 1: Geometric Accuracy of Machines Operating under No-Load or Finishing Conditions-Second Edition |
|
ISO 230-2 |
Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes-Third Edition |
|
ISO 8528-2 |
Reciprocating internal combustion engine driven alternating current generating sets Part 2: Engines-Second Edition |
|
ISO 3977-9 |
Gas Turbines - Procurement - Part 9: Reliability, Availability, Maintainability and Safety-First Edition |
|
ISO 8528-9 |
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 9: Measurement and Evaluation of Mechanical Vibrations First Edition |
|
ISO 10683 |
Fasteners - Non-Electrolytically Applied Zinc Flake Coatings-First Edition; JIS B 1046:2005 |
|
ISO 6520-1 |
Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding-Second Edition |
|
ISO 8528-3 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 3: Alternating current generators for generating sets-Second Edition |
|
ISO 8528-4 |
Reciprocating internal combustion engine driven alternating current generating sets Part 4: Controlgear and switchgear-Second Edition |
|
ISO 3511-2 |
Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 2: Extension of Basic Requirements First Edition |
|
ISO 17636 |
Non-destructive testing of welds Radiographic testing of fusionwelded joints-First Edition |
|
ISO 9606-1 |
Approval Testing of Welders - Fusion Welding - Part 1: Steels-First Edition; Amendment 1-1998 |
|
ISO 8302 |
Thermal Insulation - Determination of Steady-State Thermal Resistance and Related Properties - Guarded Hot Plate Apparatus First Edition |
|
ISO 10303-21 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 21: Implementation Methods: Clear Text Encoding of the Exchange Structure-Second Edition |
|
ISO 8504-2 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 2: Abrasive Blast-Cleaning-second edition |
|
ISO 9764 |
Electric Resistance and Induction Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing of the Weld Seam for the Detection of Longitudinal Imperfections First Edition |
|
ISO 2178 |
Non-Magnetic Coatings on Magnetic Substrates - Measurement of Coating Thickness - Magnetic Method-Second Edition; CEN EN ISO 2178: 1995; PNS 678: 1990 |
|
ISO 8178-4 |
Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state test cycles for different engine applications-Second Edition |
|
ISO 3511-4 |
Industrial Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 4: Basic Symbols for Process Computer, Interface, and Shared Display/Control Functions-First Edition |
|
ISO 8528-10 |
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 10: Measurement of Airbourne Noise by the Enveloping Surface Method-First Edition |
|
ISO 230-4 |
Test code for machine tools Part 4: Circular tests for numerically controlled machine tools-Second Edition |
|
ISO 8528-6 |
Reciprocating internal combustion engine driven alternating current generating sets Part 6: Test methods-Second Edition |
|
ISO 9717 |
Phosphate Conversion Coatings for Metals - Method of Specifying Requirements First Edition |
|
ISO 230-3 |
Test Code for Machine Tools - Part 3: Determination of Thermal Effects-Second Edition |
|
ISO 8178-10 |
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 10: Test Cycles and Test Procedures for Field Measurement of Exhaust Gas Smoke Emissions from Compression Ignition Engines Operating Under Transient Conditions-First Edition |
|
ISO 8178-3 |
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 3: Definitions and Methods of Measurement of Exhaust Gas Smoke Under Steady-State Conditions First Edition |
|
ISO 8528-7 |
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 7: Technical Declarations for Specification and Design First Edition |
|
ISO 10303-11 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 11: Description Methods: the EXPRESS Language Reference Manual-Second Edition |
|
ISO 8178-8 |
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 8: Engine Group Determination-First Edition |
|
ISO 8178-9 |
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 9: Test Cycles and Test Procedures for Test-Bed Measurement of Exhaust Gas Smoke Emissions from Compression Ignition Engines Operating Under Transient Conditions-First Edition; Amendment 1: 10/15/2004 |
|
ISO 6789 |
Assembly Tools for Screws and Nuts - Hand Torque Tools - Requirements and Test Methods for Design Conformance Testing, Quality Conformance Testing and Recalibration Procedure-Third Edition |
|
ISO 8528-8 |
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 8: Requirements and Tests for Low-Power Generating Sets First Edition |
|
ISO 230-7 |
Test code for machine tools Part 7: Geometric accuracy of axes of rotation-First edition |
|
ISO 3977-3 |
Gas Turbines - Procurement - Part 3: Design Requirements-Second Edition |
|
ISO 8178-7 |
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 7: Engine Family Determination-First Edition |
|
ISO 15547-1 |
Petroleum, petrochemical and natural gas industries Plate-type heat exchangers Part 1: Plate-and-frame heat exchangers-First Edition |
|
ISO 15614-2 CORR 1 |
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys TECHNICAL CORRIGENDUM 1-First edition |
|
ISO TR 15608 |
Welding - Guidelines for a Metallic Materials Grouping System-Second Edition |
|
ISO 13584-501 |
Industrial automation systems and integration Parts library Part 501: Reference dictionary for measuring instruments Registration procedure-First Edition |
|
ISO 8178-11 |
Reciprocating internal combustion engines Exhaust emission measurement Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions-First Edition |
|
ISO 8178-5 |
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 5: Test Fuels-First Edition; Corrected and Reprinted 05/15/1998 |
|
ISO 8178-6 |
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 6: Report of Measuring Results and Test-First Edition |
|
ISO 8503-1 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 1: Specifications and Definitions for ISO Surface Profile Comparators for the Assessment of Abrasive Blast-Cleaned Surfaces First Edition; (CEN EN ISO 8503-1: 1995) |
|
ISO 3834-2 |
Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements-Second edition |
|
ISO 15550 |
Internal Combustion Engines - Determination and Method for the Measurement of Engine Power - General Requirements |
|
ISO 8178-2 |
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 2: Measurement of Gaseous and Particulate Exhaust Emissions at Site First Edition-CEN EN ISO 8178-2: 1996 |
|
ISO 8528-12 |
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 12: Emergency Power Supply to Safety Services-First Edition |
|
ISO 10303-212 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 212: Application Protocol: Electrotechnical Design and Installation-First Edition |
|
ISO 14396 |
Reciprocating Internal Combustion Engines - Determination and Method for the Measurement of Engine Power - Additional Requirements for Exhaust Emission Tests in Accordance with ISO 8178-First Edition; Replaces ISO TR 14396 |
|
ISO 14732 |
Welding Personnel - Approval Testing of Welding Operators for Fusion Welding and of Resistance Weld Setters for Fully Mechanized and Automatic Welding of Metallic Materials-First Edition |
|
ISO 15612 |
Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure-First Edition; Replaces ISO 9956-7:1995 |
|
ISO 1832 CORR 1 |
Indexable inserts for cutting tools Designation TECHNICAL CORRIGENDUM 1-Fourth Edition |
|
ISO 230-5 |
Test Code for Machine Tools - Part 5: Determination of the Noise Emission-First Edition |
|
ISO 230-6 |
Test code for machine tools Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)-First edition |
|
ISO 8249 |
Welding - Determination of Ferrite Number (FN) in Austenitic and Duplex Ferritic-Austenitic Cr-Ni Stainless Steel Weld Metals-Second Edition |
|
ISO 10303-42 CORR 1 |
Industrial automation systems and integration - Product data representation and exchange - Part 42: Integrated generic resource: Geometric and topological representation, TECHNICAL CORRIGENDUM 1-Third Edition |
|
ISO 14172 CORR 2 |
Welding consumables Covered electrodes for manual metal arc welding of nickel and nickel alloys Classification TECHNICAL CORRIGENDUM 2-First Edition |
|
ISO 9013 |
Thermal Cutting - Classification of Thermal Cuts - Geometrical Product Specification and Quality Tolerances-Second Edition |
|
ISO TR 230-9 |
Test code for machine tools Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations-First Edition |
|
ISO 4136 |
Destructive Tests on Welds in Metallic Materials - Transverse Tensile Test-Second Edition |
|
ISO 4885 |
Ferrous Products - Heat Treatments - Vocabulary First Edition |
|
ISO 5173 |
Destructive Tests on Welds in Metallic Materials - Bend Tests-Second Edition |
|
ISO 9765 |
Submerged Arc-Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing of the Weld Seam for the Detection of Longitudinal and/or Transverse Imperfections First Edition |
|
ISO 17635 |
Non-destructive testing of welds General rules for fusion welds in metallic materials-First edition |
|
ISO 3977-8 |
Gas Turbines - Procurement - Part 8: Inspection, Testing, Installation and Commissioning-First Edition |
|
ISO 8502-6 |
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method-Second Edition |
|
ISO 857-1 |
Welding and Allied Processes - Vocabulary - Part 1: Metal Welding Processes-First Edition; Replaces ISO 857 |
|
ISO 1174-1 |
Assembly Tools for Screws and Nuts - Driving Squares - Part 1: Driving Squares for Hand Socket Tools-First Edition |
|
ISO 1711-1 |
Assembly tools for screws and nuts Technical specifications Part 1: Hand-operated wrenches and sockets-Second Edition |
|
ISO 3834-5 CORR 1 |
Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 TECHNICAL CORRIGENDUM 1-First edition |
|
ISO 4548-7 |
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 7: Vibration Fatigue Test First Edition |
|
ISO 10042 CORR 1 |
Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections TECHNICAL CORRIGENDUM 1-Second Edition |
|
ISO 14617-11 |
Graphical Symbols for Diagrams - Part 11: Devices for Heat Transfer and Heat Engines-First Edition |
|
ISO 15745-4 AMD 2 |
Industrial automation systems and integration Open systems application integration framework Part 4: Reference description for Ethernet-based control systems AMENDMENT 2: Profiles for Modbus TCP, EtherCAT and ETHERNET Powerlink-First Edition |
|
ISO 2306 |
Drills for Use Prior to Tapping Screw Threads-First Edition |
|
ISO 2725-2 |
Assembly tools for screws and nuts Square drive sockets Part 2: Machine-operated sockets ( impact )-Second Edition |
|
ISO 4548-12 |
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 12: Filtration Efficiency Using Particle Counting, and Contaminant Retention Capacity-First Edition |
|
ISO 6798 |
Reciprocating Internal Combustion Engines - Measurement of Emitted Airborne Noise - Engineering Method and Survey Method First Edition |
|
ISO 8504-3 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 3: Hand- and Power-Tool Cleaning First Edition |
|
ISO 9453 |
Soft Solder Alloys - Chemical Compositions and Forms-Second Edition |
|
ISO 9506-5 |
Industrial automation systems - Manufacturing message specification - Part 5: Companion Standard for Programmable Controllers-First Edition |
|
ISO 12944-4 |
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 4: Types of Surface and Surface Preparation-First Edition |
|
ISO 2143 |
Anodizing of Aluminium and Its Alloys - Estimation of Loss of Absorptive Power of Anodic Oxide Coatings After Sealing - Dye Spot Test with Prior Acid Treatment-First Edition |
|
ISO 22093 |
Industrial automation systems and integration Physical device control Dimensional Measuring Interface Standard (DMIS)-First Edition |
|
ISO 2725-1 |
Assembly tools for screws and nuts Square drive sockets Part 1: Hand-operated sockets-Second Edition |
|
ISO 8502-5 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 5: Measurement of Chloride on Steel Surfaces Prepared for Painting (Ion Detection Tube Method)-First Edition |
|
ISO 8503-5 |
Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast-cleaned steel substrates Part 5: Replica tape method for the determination of the surface profile-First Edition |
|
ISO 10289 |
Methods for Corrosion Testing of Metallic and Other Inorganic Coatings on Metallic Substrates - Rating of Test Specimens and Manufactured Articles Subjected to Corrosion Tests-First Edition; Cancels and Replaces ISO 1462: 1973, ISO 4540: 1980 and ISO 8403: 1991 |
|
ISO 17639 |
Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds-First edition |
|
ISO 4548-2 |
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 2: Element By-Pass Valve Characteristics-Second Edition |
|
ISO 8502-2 |
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 2: Laboratory determination of chloride on cleaned surfaces-Second Edition; Corrected and Reprinted: 01/15/2006 |
|
ISO 11126-10 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast-Cleaning Abrasives - Part 10: Almandite Garnet-First Edition |
|
ISO 14661 |
Thermal Turbines for Industrial Applications (Steam Turbines, Gas Expansion Turbines ) - General Requirements-First Edition; Amendment 1:11/01/2002 |
|
ISO 18279 |
Brazing Imperfections in brazed joints-First Edition |
|
ISO TR 17671-6 |
Welding Recommendations for welding of metallic materials Part 6: Laser beam welding-First Edition |
|
ISO 15610 |
Specification and qualification of welding procedures for metallic materials Qualification based on tested welding consumables-First Edition; Replaces ISO 9956-5 |
|
ISO 2063 |
Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys-Third Edition |
|
ISO 23278 |
Non-destructive testing of welds Magnetic particle testing of welds Acceptance levels-First Edition |
|
ISO 234-1 |
Files and Rasps - Part 1: Dimensions |
|
ISO 3315 |
Assembly Tools for Screws and Nuts - Driving Parts for Hand-Operated Square Drive Socket Wrenches - Dimensions and Tests-Third Edition |
|
ISO 3834-1 |
Quality requirements for fusion welding - of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements-Second edition |
|
ISO 3834-3 |
Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements-Second edition |
|
ISO 3977-1 |
Gas Turbines - Procurement - Part 1: General Introduction and Definitions-First Edition; Replaces ISO 3977:1991 |
|
ISO FDIS 16812 |
Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers |
|
ISO 10447 |
Resistance welding Peel and chisel testing of resistance spot and projection welds-Second Edition |
|
ISO 14731 |
Welding Coordination - Tasks and Responsibilities-Second Edition |
|
ISO 2806 |
Industrial Automation Systems - Numerical Control of Machines - Vocabulary Second Edition |
|
ISO 4532 |
Vitreous and Porcelain Enamels - Determination of the Resistance of Enamelled Articles to Impact - Pistol Test First Edition |
|
ISO 4548-1 |
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 1: Differential Pressure/Flow Characteristics-First Edition |
|
ISO 5393 |
Rotary Tools for Threaded Fasteners - Performance Test Method Second Edition |
|
ISO 7963 |
Non-destructive testing Ultrasonic testing Specification for calibration block No. 2-Second Edition |
|
ISO 841 |
Industrial Automation Systems and Integration - Numerical Control of Machines - Coordinate System and Motion Nomenclature-Second Edition |
|
ISO 8502-9 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 9: Field Method for the Conductometric Determination of Water-Soluble Salts-First Edition; Corrected and Reprinted 12/15/1999 |
|
ISO 9588 |
Metallic and other inorganic coatings Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement-Second Edition |
|
ISO 9845-1 |
Solar Energy - Reference Solar Spectral Irradiance at the Ground at Different Receiving Conditions - Part 1: Direct Normal and Hemispherical Solar Irradiance for Air Mass 1,5 First Edition |
|
ISO 15792-1 |
Welding Consumables - Test Methods - Part 1: Test Methods for All-Weld Metal Test Specimens in Steel, Nickel and Nickel Alloys-First Edition |
|
ISO 3677 |
Filler Metals for Soft Soldering, Brazing and Braze Welding - Designation Second Edition |
|
ISO TR 17671-1 |
Welding - Recommendations for Welding of Metallic Materials - Part 1: General Guidance for Arc Welding-First Edition |
|
ISO 11124-1 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives - Part 1: General Introduction and Classification First Edition |
|
ISO 15609-3 |
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 3: Electron beam welding-First Edition; Replaces ISO 9956-10:1996 |
|
ISO 15613 |
Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test-First Edition; Supersedes ISO 9956-8:1995 |
|
ISO 2064 |
Metallic and Other Inorganic Coatings - Definitions and Conventions Concerning the Measurement of Thickness-Third Edition; CEN EN ISO 2064: 1994; PNS 670: 1990 |
|
ISO 3685 |
Tool-Life Testing with Single-Point Turning Tools Second Edition |
|
ISO 3977-4 |
Gas Turbines - Procurement - Part 4: Fuels and Environment-First Edition |
|
ISO 8300 |
Determination of Plutonium Content in Plutonium Dioxide (PuO2) of Nuclear Grade Quality - Gravimetric Method First Edition |
|
ISO 8502-11 |
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 11: Field method for the turbidimetric determination of water-soluble sulfate-First Edition |
|
ISO 8504-1 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 1: General Principles-Second Edition |
|
ISO 1174-2 |
Assembly Tools for Screws and Nuts - Driving Squares - Part 2: Driving Squares for Power Socket Tools-First Edition |
|
ISO 13399-1 CORR 1 |
Cutting tool data representation and exchange Part 1: Overview, fundamental principles and general information model TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 1460 |
Metallic Coatings - Hot Dip Galvanized Coatings on Ferrous Materials - Gravimetric Determination of the Mass per Unit Area-Second Edition |
|
ISO 15745-1 AMD 1 |
Industrial automation systems and integration Open systems application integration framework Part 1: Generic reference description AMENDMENT 1-First Edition |
|
ISO 17638 |
Non-destructive testing of welds Magnetic particle testing-First Edition |
|
ISO 3977-7 |
Gas Turbines - Procurement - Part 7: Technical Information-First Edition |
|
ISO 6947 |
Welds - Working Positions - Definitions of Angles of Slope and Rotation (Revision of ISO 6947:1980) Second Edition; (Corrected and Reprinted - 1993) |
|
ISO 8999 |
Reciprocating Internal Combustion Engines - Graphical Symbols-Second Edition |
|
ISO 9006 |
Uranium Metal and Uranium Dioxide Powder and Pellets - Determination of Nitrogen Content - Method Using Ammonia- Sensing Electrode First Edition |
|
ISO TR 17663 |
Welding - Guidelines for Quality Requirements for Heat Treatment in Connection with Welding and Allied Processes-First Edition |
|
ISO TR 17671-5 |
Welding Recommendations for welding of metallic materials Part 5: Welding of clad steels-First Edition |
|
ISO TS 13399-4 |
Cutting tool data representation and exchange Part 4: Reference dictionary for adaptive items-First Edition |
|
ISO 10303-214 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 214: Application Protocol: Core Data for Automotive Mechanical Design Processes-Second Edition |
|
ISO 12224-1 |
Solder Wire, Solid and Flux Cored - Specification and Test Methods - Part 1: Classification and Performance Requirements-First Edition |
|
ISO 13919-1 |
Welding - Electron and Laser-Beam Welded Joints - Guidance on Quality Levels for Imperfections - Part 1: Steel First Edition-CEN EN ISO 13 919-1: 1996 |
|
ISO 1463 |
Metallic and Oxide Coatings - Measurement of Coating Thickness - Microscopical Method-Third Edition |
|
ISO 15614-7 |
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 7: Overlay welding-First Edition |
|
ISO 2400 |
Welds in Steel - Reference Block for the Calibration of Equipment for Ultrasonic Examination-First Edition |
|
ISO 2541 |
Centre Drills for Centre Holes with Radius Form - Type R-First Edition |
|
ISO 2710-1 |
Reciprocating Internal Combustion Engines - Vocabulary - Part 1: Terms for Engine Design and Operation-First Edition; This Standard Together with 2710-2 Cancels and Replaces ISO 2710: 1978 |
|
ISO 3834-4 |
Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements-Second edition |
|
ISO 3855 |
Milling Cutters - Nomenclature-First Edition; Corrigendum 1: 1996 |
|
ISO 4228 |
Spanners and Wrenches - Spline Drive Ends for Power Socket Wrenches First Edition |
|
ISO 81400-4 CORR 1 |
Wind turbines Part 4: Design and specification of gearboxes TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 8502-4 |
Preparation of Steel Substrates Before Application of Paint and Related Products - Tests for the Assessment of Surface Cleanliness - Part 4: Guidance on the Estimation of the Probability of Condensation Prior to Paint Application First Edition |
|
ISO 8503-3 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 3: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of Surface Profile - Focusing Microscope Procedure First Edition; (CEN EN ISO 8503-3: 1995) |
|
ISO 8503-4 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 4: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of Surface Profile - Stylus Instrument Procedure First Edition (CEN EN ISO 8503-4: 1995) |
|
ISO TR 20172 |
Welding - Grouping systems for materials - European materials-First Edition |
|
ISO TS 13399-60 |
Cutting tool data representation and exchange Part 60: Reference dictionary for connection systems-First Edition |
|
ISO TS 18876-1 |
Industrial automation systems and integration Integration of industrial data for exchange, access and sharing Part 1: Architecture overview and description-First Edition |
|
ISO 10218-1 CORR 1 |
Robots for industrial environments Safety requirements Part 1: Robot TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 11161 |
Safety of machinery Integrated manufacturing systems Basic requirements-SECOND EDITION |
|
ISO 13916 |
Welding - Guidance on the Measurement of Preheating Temperature, Interpass Temperature and Preheat Maintenance Temperature First Edition-CEN EN ISO 13 916: 1996 |
|
ISO 14329 |
Resistance welding Destructive tests of welds Failure types and geometric measurements for resistance spot, seam and projection welds-First Edition |
|
ISO 15547-2 |
Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat exchangers-First Edition; Together with ISO 15547-1 replaces ISO 15547:2000 |
|
ISO 15609-4 |
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding-First Edition; Replaces ISO 9956-11 |
|
ISO 19439 CORR 1 |
Enterprise integration Framework for enterprise modelling TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 3977-5 |
Gas Turbines - Procurement - Part 5: Applications for Petroleum and Natural Gas Industries-First Edition |
|
ISO 4519 |
Electrodeposited Metallic Coatings and Related Finishes - Sampling Procedures for Inspection by Attributes First Edition; (Erratum-1981) (PNS 674: 1990) |
|
ISO 8503-2 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 2: Method for the Grading of Surface Profile of Abrasive Blast-Cleaned Steel Comparator Procedure-First Edition; CEN EN ISO 8503-2: 1995 |
|
ISO 8993 |
Anodized Aluminium and Aluminium Alloys - Rating System for the Evaluation of Pitting Corrosion - Chart Method First Edition |
|
ISO DIS 16812 |
Petroleum, petrochemical and natural gas industries - Shelland- tube heat exchangers |
|
ISO TR 20173 |
Welding Grouping systems for materials American materials-First edition |
|
ISO TS 13399-3 |
Cutting tool data representation and exchange Part 3: Reference dictionary for tool items-First Edition |
|
ISO 11042-1 |
Gas Turbines - Exhaust Gas Emission - Part 1: Measurement and Evaluation First Edition |
|
ISO 15614-4 CORR 1 |
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 4: Finishing welding of aluminium castings TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 15787 |
Technical Product Documentation - Heat-Treated Ferrous Parts - Presentation and Indications-First Edition |
|
ISO 1703 |
Assembly tools for screws and nuts Designation and nomenclature-Third Edition |
|
ISO 17640 |
Non-destructive testing of welds Ultrasonic testing of welded joints-First Edition |
|
ISO 17660-1 |
Welding Welding of reinforcing steel Part 1: Load-bearing welded joints-First Edition |
|
ISO 22826 |
Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)-First Edition |
|
ISO 23277 |
Non-destructive testing of welds Penetrant testing of welds Acceptance levels-First Edition |
|
ISO 8502-12 |
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 12: Field method for the titrimetric determination of water-soluble ferrous ions-First Edition |
|
ISO 8502-8 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 8: Field Method for the Refractometric Determination of Moisture-First Edition |
|
ISO 857-2 |
Welding and allied processes Vocabulary Part 2: Soldering and brazing processes and related terms-First Edition |
|
ISO TS 13399-100 |
Cutting tool data representation and exchange Part 100: Definitions, principles and methods for reference dictionaries-First Edition |
|
ISO 10303-210 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 210: Application Protocol: Electronic Assembly, Interconnection, and Packaging Design-First Edition |
|
ISO 10303-232 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 232: Application Protocol: Tehcnical Data Packaging Core Information and Exchange-First Edition |
|
ISO 1173 |
Assembly Tools for Screws and Nuts - Drive Ends for Hand- and Machine-Operated Screwdriver Bits and Connecting Parts - Dimensions, Torque Testing-Third Edition |
|
ISO 11900-1 |
Tools for pressing Ball-lock punch retainers Part 1: Types A and B, rectangular and square for light duty-Second edition |
|
ISO 1456 |
Metallic Coatings - Electrodeposited Coatings of Nickel Plus Chromium and of Copper Plus Nickel Plus Chromium-Third Edition |
|
ISO 15792-3 |
Welding Consumables - Test Methods - Part 3: Classification Testing of Positional Capacity and Root Penetration of Welding Consumables in a Fillet Weld-First Edition; Corrigendum 1: 11/1/2006 |
|
ISO 17637 |
Non-destructive testing of welds Visual testing of fusion-welded joints-First Edition |
|
ISO 3317 |
Assembly Tools for Screws and Nuts - Square Drive Extension Hexagon Insert, for Power Socket Wrenches First Edition |
|
ISO 3977-2 |
Gas Turbines - Procurement - Part 2: Standard Reference Conditions and Ratings-First Edition; Replaces ISO 3977:1991 |
|
ISO 4516 |
Metallic and Other Inorganic Coatings - Vickers and Knoop Microhardness Tests-Second Edition |
|
ISO 5178 |
Destructive Tests on Welds in Metallic Materials - Longitudinal Tensile Test on Weld Metal in Fusion Welded Joints-First Edition |
|
ISO 7388-1 |
Tool shanks with 7/24 taper for automatic tool changers Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF-Second Edition |
|
ISO TR 17844 |
Welding Comparison of standardised methods for the avoidance of cold cracks-First Edition |
|
ISO 10303-31 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 31: Conformance Testing Methodology and Framework: General Concepts First Edition |
|
ISO 11124-3 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives - Part 3: High-Carbon Cast-Steel Shot and Grit First Edition |
|
ISO 11124-4 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives - Part 4: Low-Carbon Cast-Steel Shot First Edition |
|
ISO 12164-1 |
Hollow Taper Interface with Flange Contact Surface - Part 1: Shanks - Dimensions-First Edition |
|
ISO 15611 |
Specification and qualification of welding procedures for metallic materials Qualification based on previous welding experience-First Edition |
|
ISO 15614-12 |
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 12: Spot, seam and projection welding-First Edition |
|
ISO 1641-1 |
End Mills and Slot Drills - Part 1: Milling Cutters with Cylindrical Shanks-Second Edition |
|
ISO 240 |
Milling Cutters - Interchangeability Dimensions for Cutter Arbors or Cutter Mandrels-Second Edition |
|
ISO 2560 |
Welding Consumables - Covered Electrodes for Manual Metal Arc Welding of Non-Alloy and Fine Grain Steels - Classification-Second Edition |
|
ISO 2936 |
Assembly Tools for Screws and Nuts - Hexagon Socket Screw Keys-Fifth Edition |
|
ISO 3338-2 |
Cylindrical shanks for milling cutters Part 2: Dimensional characteristics of flatted cylindrical shanks-Sixth edition |
|
ISO 3442-3 |
Machine tools Dimensions and geometric tests for self-centring chucks with two-piece jaws Part 3: Power-operated chucks with serrated jaws-First Edition |
|
ISO 3861 |
Rubber Hoses for Sand and Grit Blasting - Specification-Third edition |
|
ISO 6788 |
Assembly Tools for Screws and Nuts - Four-Way Socket Wrenches - Dimensions and Torque Test-Second Edition |
|
ISO 9005 |
Nuclear energy Uranium dioxide powder and sintered pellets Determination of oxygen/uranium atomic ratio by the amperometric method-Second Edition |
|
ISO 9015-1 |
Destructive Tests on Welds in Metallic Materials - Hardness Testing - Part 1: Hardness Test on Arc Welded Joints-First Edition |
|
ISO 9229 |
Thermal insulation Vocabulary-Second Edition |
|
ISO TR 17671-2 |
Welding - Recommendations for Welding of Metallic Materials - Part 2: Arc Welding of Ferritic Steels |
|
ISO TR 17671-4 |
Welding - Recommendations for Welding of Metallic Materials - Part 4: Arc Welding of Stainless Steels-First Edition |
|
ISO 10303-112 |
Industrial automation systems and integration Product data representation and exchange Part 112: Integrated application resource: Modelling commands for the exchange of procedurally represented 2D CAD models-First Edition |
|
ISO 10303-224 |
Industrial automation systems and integration Product data representation and exchange Part 224: Application protocol: Mechanical product definition for process planning using machining feature-Third Edition |
|
ISO 13584-102 |
Industrial automation systems and integration Parts library Part 102: View exchange protocol by ISO 10303 conforming specification-First Edition |
|
ISO 14175 |
Welding Consumables - Shielding Gases for Arc Welding and Cutting-First Edition |
|
ISO 2360 |
Non-conductive coatings on non-magnetic electrically conductive basis materials Measurement of coating thickness Amplitude-sensitive eddy current method-Third Edition |
|
ISO 3002-1 |
Basic Quantities in Cutting and Grinding - Part 1: Geometry of the Active Part of Cutting Tools - General Terms, Reference Systems, Tool and Working Angles, Chip Breakers Second Edition; (Amendment 1-1992) |
|
ISO 3318 |
Assembly Tools for Screws and Nuts - Double-Headed Open-Ended Wrenches, Double-Headed Ring Wrenches and Combination Wrenches - Maximum Widths of Heads Third Edition |
|
ISO 4548-6 |
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 6: Static Burst Pressure Test-First Edition; Corrigendum 1-1990 |
|
ISO 9060 |
Solar Energy - Specification and Classification of Instruments for Measuring Hemispherical Solar and Direct Solar Radiation First Edition |
|
ISO TR 17671-3 |
Welding - Recommendations for Welding of Metallic Materials - Part 3: Arc Welding of Stainless Steels-First Edition |
|
ISO TR 17671-7 |
Welding Recommendations for welding of metallic materials Part 7: Electron beam welding-First Edition |
|
ISO TS 13399-50 |
Cutting tool data representation and exchange Part 50: Reference dictionary for reference systems and common concepts-First Edition |
|
ISO TS 18876-2 |
Industrial automation systems and integration Integration of industrial data for exchange, access and sharing Part 2: Integration and mapping methodology-First Edition |
|
ISO 10303-227 CORR 1 |
Industrial automation systems and integration Product data representation and exchange Part 227: Application protocol: Plant spatial configuration TECHNICAL CORRIGENDUM 1-Second Edition |
|
ISO 10791-10 |
Test conditions for machining centres Part 10: Evaluation of thermal distortions-First Edition |
|
ISO 10791-7 |
Test Conditions for Machining Centres - Part 7: Accuracy of a Finished Test Piece-First Edition |
|
ISO 11042-2 |
Gas Turbines - Exhaust Gas Emission - Part 2: Automated Emission Monitoring First Edition |
|
ISO 11124-2 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives - Part 2: Chilled-Iron Grit First Edition |
|
ISO 11127-6 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning Abrasives - Part 6: Determination of Water- Soluble Contaminants by Conductivity Measurement First Edition |
|
ISO 13332 |
Reciprocating Internal Combustion Engines - Test Code for the Measurement of Structure-Borne Noise Emitted From High-Speed and Medium-Speed Reciprocating Internal Combustion Engines Measured at the Engine Feet-First Edition |
|
ISO 13584-511 |
Industrial automation systems and integration Parts library Part 511: Mechanical systems and components for general use Reference dictionary for fasteners-First Edition |
|
ISO 15614-11 |
Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 11: Electron and Laser Beam Welding-First Edition |
|
ISO 16432 |
Resistance welding Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s)-First Edition |
|
ISO 2080 |
Electroplating and Related Processes - Vocabulary-Second Edition |
|
ISO 2819 |
Metallic Coatings on Metallic Substrates - Electrodeposited and Chemically Deposited Coatings - Review of Methods Available for Testing Adhesion Second Edition; (CEN EN ISO 2819: 1994) (PNS 686: 1990) |
|
ISO 2857 |
Ground Thread Taps for ISO Metric Threads of Tolerances 4H to 8H and 4G to 6G Coarse and Fine Pitches - Manufacturing Tolerances on the Threaded Portion First Edition; (Amendment 1-1984) (Amendment 2-1986) (Corrigendum 1-1990) |
|
ISO 3316 |
Assembly Tools for Screws and Nuts - Attachments for Hand-Operated Square Drive Socket Wrenches - Dimensions and Tests-Third Edition |
|
ISO 3338-1 |
Cylindrical Shanks for Milling Cutters - Part 1: Dimensional Characteristics of Plain Cylindrical Shanks-Fourth Edition |
|
ISO 4527 |
Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods-Second Edition |
|
ISO 4548-4 |
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 4: Initial Particle Retention Efficiency, Life and Cumulative Efficiency (Gravimetric Method)-First Edition |
|
ISO 6758 |
Welded Steel Tubes for Heat Exchangers First Edition |
|
ISO 7967-7 CORR 1 |
Reciprocating internal combustion engines Vocabulary of components and systems Part 7: Governing systems TECHNICAL CORRIGENDUM 1-Second Edition |
|
ISO 8662-1 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 1: General First Edition; (Corrected and Reprinted - 1988) (CEN EN 28662-1: 1992) |
|
ISO 9181 |
Tools for Pressing - Round Punches with 60 Degree Conical Head and Reduced Shank-Second Edition |
|
ISO 9454-1 |
Soft Soldering Fluxes - Classification and Requirements - Part 1: Classification, Labelling and Packaging First Edition (CEN EN 29454-1: 1993) |
|
ISO 9846 |
Solar Energy - Calibration of a Pyranometer Using a Pyrheliometer First Edition |
|
ISO 10303-44 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 44: Integrated Generic Resource: Product Structure Configuration-Second Edition; Technical Corrigendum 1: 03-15-2001 |
|
ISO 1204 |
Reciprocating Internal Combustion Engines - Designation of the Direction of Rotation and of Cylinders and Valves in Cylinder Heads, and Definition of Right-Hand and Left-Hand In-Line Engines and Locations on an Engine-Second Edition |
|
ISO 13584-1 |
Industrial Automation Systems and Integration - Parts Library - Part 1: Overview and Fundamental Principles-First Edition |
|
ISO 13918 |
Welding - Studs and ceramic ferrules for arc stud welding-Second Edition |
|
ISO 15620 |
Welding - Friction Welding of Metallic Materials-First Edition |
|
ISO 15704 |
Industrial automation systems - Requirements for enterprise-reference architectures and methodologies - AMENDMENT 1: Additional views for user concerns-First Edition; Amendment 1: 08/15/2005 |
|
ISO 16348 |
Metallic and other inorganic coatings Definitions and conventions concerning appearance-First Edition |
|
ISO 18276 |
Welding consumables Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels Classification-First Edition |
|
ISO 2351-3 |
Assembly Tools for Screws and Nuts - Machine-Operated Screwdriver Bits - Part 3: Screwdriver Bits for Hexagon Socket Screws-First Edition; Replaces ISO 3109 |
|
ISO 2725-3 |
Assembly Tools for Screws and Nuts - Square Drive Sockets - Part 3: Machine-Operated Sockets ( |
|
ISO 3294 |
Parallel Shank Countersinks for Angles 60 Degrees, 90 Degrees and 120 Degrees Inclusive First Edition |
|
ISO 3882 |
Metallic and Other Inorganic Coatings - Review of Methods of Measurement of Thickness-Third Edition |
|
ISO 4522-2 |
Metallic Coatings - Test Methods for Electrodeposited Silver and Silver Alloy Coatings - Part 2: Adhesion Tests First Edition |
|
ISO 4548-11 |
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 11: Self-Cleaning Filters-First Edition |