|
ISO 12164-1 |
Hollow Taper Interface with Flange Contact Surface - Part 1: Shanks - Dimensions-First Edition |
|
ISO 12508 |
Earth-Moving Machinery - Operator Station and Maintenance Areas - Bluntness of Edges First Edition |
|
ISO 15611 |
Specification and qualification of welding procedures for metallic materials Qualification based on previous welding experience-First Edition |
|
ISO 15614-12 |
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 12: Spot, seam and projection welding-First Edition |
|
ISO 1641-1 |
End Mills and Slot Drills - Part 1: Milling Cutters with Cylindrical Shanks-Second Edition |
|
ISO 1813 |
Belt Drives - V-Ribbed Belts, Joined V-Belts and V-Belts Including Wide Section Belts and Hexagonal Belts - Electrical Conductivity of Antistatic Belts: Characteristics and Methods of Test-Third Edition; Corrected and Reprinted 04/15/1999 |
|
ISO 240 |
Milling Cutters - Interchangeability Dimensions for Cutter Arbors or Cutter Mandrels-Second Edition |
|
ISO 2560 |
Welding Consumables - Covered Electrodes for Manual Metal Arc Welding of Non-Alloy and Fine Grain Steels - Classification-Second Edition |
|
ISO 2936 |
Assembly Tools for Screws and Nuts - Hexagon Socket Screw Keys-Fifth Edition |
|
ISO 3338-2 |
Cylindrical shanks for milling cutters Part 2: Dimensional characteristics of flatted cylindrical shanks-Sixth edition |
|
ISO 3442-3 |
Machine tools Dimensions and geometric tests for self-centring chucks with two-piece jaws Part 3: Power-operated chucks with serrated jaws-First Edition |
|
ISO 4301-3 |
Cranes - Classification - Part 3: Tower Cranes First Edition |
|
ISO 4305 |
Mobile Cranes - Determination of Stability Second Edition |
|
ISO 5692-2 CORR 1 |
Agricultural vehicles Mechanical connections on towed vehicles Part 2: Coupling ring 40 with socket-First Edition |
|
ISO 5697 |
Agricultural and Forestry Vehicles - Determination of Braking Performance First Edition |
|
ISO 6489-4 |
Agricultural vehicles Mechanical connections between towed and towing vehicles Part 4: Dimensions of piton-type coupling-First Edition |
|
ISO 6788 |
Assembly Tools for Screws and Nuts - Four-Way Socket Wrenches - Dimensions and Torque Test-Second Edition |
|
ISO 9015-1 |
Destructive Tests on Welds in Metallic Materials - Hardness Testing - Part 1: Hardness Test on Arc Welded Joints-First Edition |
|
ISO TR 17671-2 |
Welding - Recommendations for Welding of Metallic Materials - Part 2: Arc Welding of Ferritic Steels |
|
ISO TR 17671-4 |
Welding - Recommendations for Welding of Metallic Materials - Part 4: Arc Welding of Stainless Steels-First Edition |
|
ISO 10303-210 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 210: Application Protocol: Electronic Assembly, Interconnection, and Packaging Design-First Edition |
|
ISO 10303-232 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 232: Application Protocol: Tehcnical Data Packaging Core Information and Exchange-First Edition |
|
ISO 10823 CORR 1 |
Guidelines for the selection of roller chain drives TECHNICAL CORRIGENDUM 1-Second Edition |
|
ISO 1173 |
Assembly Tools for Screws and Nuts - Drive Ends for Hand- and Machine-Operated Screwdriver Bits and Connecting Parts - Dimensions, Torque Testing-Third Edition |
|
ISO 11900-1 |
Tools for pressing Ball-lock punch retainers Part 1: Types A and B, rectangular and square for light duty-Second edition |
|
ISO 15792-3 |
Welding Consumables - Test Methods - Part 3: Classification Testing of Positional Capacity and Root Penetration of Welding Consumables in a Fillet Weld-First Edition; Corrigendum 1: 11/1/2006 |
|
ISO 17637 |
Non-destructive testing of welds Visual testing of fusion-welded joints-First Edition |
|
ISO 19353 |
Safety of machinery Fire prevention and protection-First Edition |
|
ISO 3317 |
Assembly Tools for Screws and Nuts - Square Drive Extension Hexagon Insert, for Power Socket Wrenches First Edition |
|
ISO 5005 |
Earth-Moving Machinery - Method for Locating the Centre of Gravity First Edition; (SAE J 874-1993) |
|
ISO 5178 |
Destructive Tests on Welds in Metallic Materials - Longitudinal Tensile Test on Weld Metal in Fusion Welded Joints-First Edition |
|
ISO 5388 |
Stationary Air Compressors - Safety Rules and Code of Practice First Edition |
|
ISO 6011 |
Earth-moving machinery Visual display of machine operation-Third Edition |
|
ISO 7132 |
Earth-moving machinery Dumpers Terminology and commercial specifications-Third Edition |
|
ISO 7388-1 |
Tool shanks with 7/24 taper for automatic tool changers Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF-Second Edition |
|
ISO TR 17844 |
Welding Comparison of standardised methods for the avoidance of cold cracks-First Edition |
|
ISO 10303-14 |
Industrial automation systems and integration Product data representation and exchange Part 14: Description methods: The EXPRESS-X language reference manual-First Edition |
|
ISO 10303-238 |
Industrial automation systems and integration Product data representation and exchange Part 238: Application protocol: Application interpreted model for computerized numerical controllers-First Edition |
|
ISO 10625 |
Equipment for Crop Protection - Sprayer Nozzles - Colour Coding for Identification-Second Edition |
|
ISO 10782-1 |
Definitions and Attributes of Data Elements for Control and Monitoring of Textile Processes - Part 1: Spinning, Spinning Preparatory and Related Processes-First Edition |
|
ISO 11529-1 |
Milling Cutters - Designation - Part 1: Shank-type end mills of solid or tipped design-Second Edition |
|
ISO 11676 |
Textile Machinery and Accessories - Chain Links for Wrap Knitting Machines - Vocabulary and Symbols First Edition |
|
ISO 12164-2 |
Hollow Taper Interface with Flange Contact Surface - Part 2: Receivers - Dimensions-First Edition |
|
ISO 13855 |
Safety of Machinery - Positioning of Protective Equipment with Respect to the Approach Speeds of Parts of the Human Body-First Edition |
|
ISO 13856-3 |
Safety of machinery Pressuresensitive protective devices Part 3: General principles for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices-First Edition |
|
ISO 14271 |
Vickers Hardness Testing of Resistance Spot, Projection and Seam Welds (Low Load and Microhardness)-First Edition |
|
ISO 14273 |
Specimen Dimensions and Procedure for Shear Testing Resistance Spot, Seam and Embossed Projection Welds-First Edition |
|
ISO 14324 |
Resistance spot welding Destructive tests of welds Method for the fatigue testing of spot welded joints-First Edition |
|
ISO 14518 |
Cranes Requirements for test loads-First Edition |
|
ISO 15488 |
Collets with 8° setting angle for tool shanks Collets, nuts and fitting dimensions-Second Edition |
|
ISO 15609-2 |
Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Specification - Part 2: Gas Welding-First Edition |
|
ISO 15614-5 |
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 5: Arc welding of titanium, zirconium and their alloys-First Edition |
|
ISO 15614-8 |
Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 8: Welding of Tubes to Tube-Plate Joints-First Edition |
|
ISO 15654 |
Fatigue test method for transmission precision roller chains-First Edition |
|
ISO 15792-2 |
Welding Consumables - Test Methods - Part 2: Preparation of Single-Run and Two-Run Technique Test Specimens in Steel-First Edition |
|
ISO 2148 |
Continuous Handling Equipment - Nomenclature-First Edition |
|
ISO 2380-1 |
Assembly tools for screws and nuts Screwdrivers for slotted-head screws Part 1: Tips for hand- and machine-operated screwdrivers-Third Edition |
|
ISO 2380-2 |
Assembly tools for screws and nuts Screwdrivers for slotted-head screws Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers-Third Edition |
|
ISO 2972 |
Numerical Control of Machines - Symbols Second Edition |
|
ISO 3821 |
Gas Welding Equipment - Rubber Hoses for Welding, Cutting and Allied Processes-Third Edition |
|
ISO 4254-9 |
Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety - Part 9: Equipment for Sowing, Planting and Distributing Fertilizers First Edition |
|
ISO 4306-2 |
Cranes - Vocabulary - Part 2: Mobile Cranes Second Edition |
|
ISO 4306-5 |
Cranes - Vocabulary - Part 5: Bridge and gantry cranes-First Edition |
|
ISO 5151 |
Non-Ducted Air Conditioners and Heat Pumps - Testing and Rating for Performance First Edition; |
|
ISO 5296-1 |
Synchronous Belt Drives - Belts - Part 1: Pitch Codes MXL, XL, L, H, XH and XXH - Metric and Inch Dimensions First Edition |
|
ISO 583-1 |
Conveyor belts with a textile carcass Total thickness and thickness of elements Part 1: Methods of test-First Edition; Technical Corrigendum 1: 12/01/2006; Together with 583-2 Replaces ISO 583:1990 |
|
ISO 7189 |
Continuous Mechanical Handling Equipment - Apron Conveyors - Design Rules First Edition |
|
ISO 7388-2 |
Tool shanks with 7/24 taper for automatic tool changers Part 2: Dimensions and designation of shanks of forms J, JD and JF-Second Edition |
|
ISO 8573-5 |
Compressed Air - Part 5: Test Methods for Oil Vapour and Organic Solvent Content-First Edition |
|
ISO 8688-1 |
Tool Life Testing in Milling - Part 1: Face Milling First Edition |
|
ISO 8688-2 |
Tool Life Testing in Milling - Part 2: End Milling First Edition |
|
ISO 9927-1 |
Cranes - Inspections - Part 1: General First Edition |
|
ISO TR 16880 |
Cranes Bridge and gantry cranes International Standards for design and manufacturing requirements and recommendations-First Edition |
|
ISO 10303-44 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 44: Integrated Generic Resource: Product Structure Configuration-Second Edition; Technical Corrigendum 1: 03-15-2001 |
|
ISO 10533 |
Earth-Moving Machinery - Lift-Arm Support Devices-First Edition; Amendment 1: 06/01/2005 |
|
ISO 11662-1 |
Mobile Cranes - Experimental Determination of Crane Performance - Part 1: Tipping Loads and Radii First Edition |
|
ISO 12485 |
Tower Cranes - Stability Requirements-First Edition |
|
ISO 13050 |
Curvilinear Toothed Synchronous Belt Drive Systems-First Edition |
|
ISO 13584-1 |
Industrial Automation Systems and Integration - Parts Library - Part 1: Overview and Fundamental Principles-First Edition |
|
ISO 13918 |
Welding - Studs and ceramic ferrules for arc stud welding-Second Edition |
|
ISO 14250 |
Steel - Metallographic Characterization of Duplex Grain Size and Distribution-First Edition |
|
ISO 15620 |
Welding - Friction Welding of Metallic Materials-First Edition |
|
ISO 15704 |
Industrial automation systems - Requirements for enterprise-reference architectures and methodologies - AMENDMENT 1: Additional views for user concerns-First Edition; Amendment 1: 08/15/2005 |
|
ISO 1819 |
Continuous Mechanical Handling Equipment - Safety Code - General Rules-First Edition |
|
ISO 18276 |
Welding consumables Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels Classification-First Edition |
|
ISO 23205 |
Agricultural tractors Instructional seat-First Edition |
|
ISO 2351-3 |
Assembly Tools for Screws and Nuts - Machine-Operated Screwdriver Bits - Part 3: Screwdriver Bits for Hexagon Socket Screws-First Edition; Replaces ISO 3109 |
|
ISO 2725-3 |
Assembly Tools for Screws and Nuts - Square Drive Sockets - Part 3: Machine-Operated Sockets ( |
|
ISO 3294 |
Parallel Shank Countersinks for Angles 60 Degrees, 90 Degrees and 120 Degrees Inclusive First Edition |
|
ISO 5294 |
Synchronous Belt Drives - Pulleys Second Edition |
|
ISO 5295 |
Synchronous Belts - Calculation of Power Rating and Drive Centre Distance Second Edition |
|
ISO 5692-1 |
Agricultural vehicles Mechanical connections on towed vehicles Part 1: Dimensions for hitch rings-First Edition |
|
ISO 5713 |
Equipment for Working the Soil - Fixing Bolts for Soil Working Elements First Edition |
|
ISO 6489-2 |
Agricultural Vehicles - Mechanical Connections between Towed and Towing Vehicles - Part 2: Specification for Clevis Coupling 40-Second Edition |
|
ISO 6534 |
Forestry machinery Portable chain-saw hand-guards Mechanical strength-third Edition |
|
ISO 8640-1 |
Textile machinery and accessories Flat warp knitting machines Part 1: Vocabulary of basic sctructure and knitting elements-Second Edition; Bilingual |
|
ISO 9563 |
Belt Drives - Electrical Conductivity of Antistatic Endless Synchronous Belts - Characteristics and Test Method First Edition |
|
ISO 9981 |
Belt Drives - Pulleys and V-Ribbed Belts for the Automotive Industry - PK Profile: Dimensions-Second Edition |
|
ISO TR 22824 |
Welding consumables Predicted and measured FN in specifications A position statement of the experts of IIW Commission IX-First Edition |
|
ISO 10303-227 CORR 1 |
Industrial automation systems and integration Product data representation and exchange Part 227: Application protocol: Plant spatial configuration TECHNICAL CORRIGENDUM 1-Second Edition |
|
ISO 10791-10 |
Test conditions for machining centres Part 10: Evaluation of thermal distortions-First Edition |
|
ISO 10791-7 |
Test Conditions for Machining Centres - Part 7: Accuracy of a Finished Test Piece-First Edition |
|
ISO 12003-1 |
Agricultural and Forestry Tractors - Narrow-Track Wheeled Tractors - Part 1: Front-Mounted Roll-Over Protective Structures-First Edition |
|
ISO 12140 |
Agricultural Machinery - Agricultural Trailers and Trailed Equipment - Drawbar Jacks-First Edition |
|
ISO 13203 |
Chains, sprockets and accessories List of equivalent terms Chaînes, roues dentées et accessoires Liste des termes équivalents-First Edition |
|
ISO 13584-511 |
Industrial automation systems and integration Parts library Part 511: Mechanical systems and components for general use Reference dictionary for fasteners-First Edition |
|
ISO 14159 |
Safety of Machinery - Hygiene Requirements for the Design of Machinery-First Edition |
|
ISO 15614-11 |
Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 11: Electron and Laser Beam Welding-First Edition |
|
ISO 16432 |
Resistance welding Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s)-First Edition |
|
ISO 23853 |
Cranes Training of slingers and signallers-First Edition |
|
ISO 2857 |
Ground Thread Taps for ISO Metric Threads of Tolerances 4H to 8H and 4G to 6G Coarse and Fine Pitches - Manufacturing Tolerances on the Threaded Portion First Edition; (Amendment 1-1984) (Amendment 2-1986) (Corrigendum 1-1990) |
|
ISO 3316 |
Assembly Tools for Screws and Nuts - Attachments for Hand-Operated Square Drive Socket Wrenches - Dimensions and Tests-Third Edition |
|
ISO 3338-1 |
Cylindrical Shanks for Milling Cutters - Part 1: Dimensional Characteristics of Plain Cylindrical Shanks-Fourth Edition |
|
ISO 4301-2 |
Lifting Appliances - Classification - Part 2: Mobile Cranes First Edition |
|
ISO 4310 |
Cranes - Test Code and Procedures First Edition |
|
ISO 5296-2 |
Synchronous Belt Drives - Belts - Part 2: Pitch Codes MXL and XXL - Metric Dimensions First Edition |
|
ISO 5711 |
Tractors and Machinery for Agriculture and Forestry - Wheel-to-Hub Fixing Dimensions First Edition |
|
ISO 6746-1 |
Earth-moving machinery Definitions of dimensions and codes Part 1: Base machine-Third Edition |
|
ISO 6814 |
Machinery for Forestry - Mobile and Self-Propelled Machinery - Terms, Definitions and Classification-Second Edition |
|
ISO 7363 |
Cranes and Lifting Appliances - Technical Characteristics and Acceptance Documents First Edition |
|
ISO 8662-1 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 1: General First Edition; (Corrected and Reprinted - 1988) (CEN EN 28662-1: 1992) |
|
ISO 8759-1 |
Agricultural Wheeled Tractors - Front-Mounted Equipment - Part 1: Power Take-Off and Three-Point Linkage-Second Edition |
|
ISO 9181 |
Tools for Pressing - Round Punches with 60 Degree Conical Head and Reduced Shank-Second Edition |
|
ISO 9454-1 |
Soft Soldering Fluxes - Classification and Requirements - Part 1: Classification, Labelling and Packaging First Edition (CEN EN 29454-1: 1993) |
|
ISO 9927-3 |
Cranes Inspections Part 3: Tower cranes-First Edition |
|
ISO TR 13849-100 |
Safety of Machinery - Safety-Related Parts of Control Systems - Part 100: Guidelines for the Use and Application of ISO 13849-1-First Edition |
|
ISO 10303-201 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 201: Application Protocol: Explicit Draughting First Edition |
|
ISO 10303-209 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 209: Application Protocol: Composite and Metallic Structural Analysis and Related Design-First Edition |
|
ISO 10303-22 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 22: Implementation Methods: Standard Data Access Interface-First Edition |
|
ISO 11001-3 |
Agricultural Wheeled Tractors and Implements - Three-Point Hitch Couplers - Part 3: Link Coupler First Edition |
|
ISO 11650 |
Performance of Refrigerant Recovery and/or Recycling Equipment-First Edition |
|
ISO 11660-3 |
Cranes - Access, Guards and Restraints - Part 3: Tower Cranes-First Edition |
|
ISO 12500-1 |
Filters for compressed air Test methods Part 1: Oil aerosols-First Edition |
|
ISO 15609-5 |
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding-First Edition |
|
ISO 16881-1 |
Cranes Design calculation for rail wheels and associated trolley track supporting structure Part 1: General-First edition |
|
ISO 17655 |
Destructive Tests on Welds in Metallic Materials - Method for Taking Samples for Delta Ferrite Measurement-First Edition |
|
ISO 18273 |
Welding consumables Wire electrodes, wires and rods for welding of aluminium and aluminium alloys Classification-First edition |
|
ISO 1977 |
Conveyor chains, attachments and sprockets-Second Edition |
|
ISO 21507 |
Earth-moving machinery - Performance requirements for non-metallic fuel tanks-First Edition |
|
ISO 22825 |
Non-destructive testing of welds Ultrasonic testing Testing of welds in austenitic steels and nickel-based alloys-First Edition |
|
ISO 254 |
Belt Drives - Pulleys - Quality, Finish and Balance-Third Edition |
|
ISO 3164 |
Earth-Moving Machinery - Laboratory Evaluations of Protective Structures - Specifications for Deflection-Limiting Volume Fifth Edition |
|
ISO 4306-3 |
Cranes - Vocabulary - Part 3: Tower Cranes-Third Edition |
|
ISO 5287 |
Belt drives Narrow V-belts for the automotive industry Fatigue test-Third Edition |
|
ISO 5288 |
Synchronous Belt Drives - Vocabulary-Second edition |
|
ISO 5290 |
Belt Drives - Grooved Pulleys for Narrow V-Belts - Groove Sections 9N/J, 15N/J, and 25N/J (Effective System)-Fourth Edition |
|
ISO 6392-2 |
Earth-Moving Machinery - Lubrication Fittings - Part 2: Grease-Gun Nozzles-First Edition |
|
ISO 6462 |
Face Milling Cutters with Indexable Inserts - Dimensions First Edition; (ANSI 6462-1983) |
|
ISO 6520-2 |
Welding and Allied Processes - Classification of Geometric Imperfections in Metallic Materials - Part 2: Welding with Pressure-First Edition |
|
ISO 7133 |
Earth-Moving Machinery - Tractor-Scrapers - Terminology and Commercial Specifications Second Edition |
|
ISO 8210 |
Equipment for Harvesting - Combine Harvesters - Test Procedure First Edition |
|
ISO 9015-2 |
Destructive tests on welds in metallic materials Hardness testing Part 2: Microhardness testing of welded joints-First Edition |
|
ISO 9692-1 |
Welding and allied processes Recommendations for joint preparation Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels-First Edition; |
|
ISO TR 12369 |
Agricultural Tractors and Machinery - Electrical Power Transmission Connector-First Edition; Amendment 1: 12-01-1999 |
|
ISO TS 13399-2 |
Cutting tool data representation and exchange Part 2: Reference dictionary for the cutting items-First Edition |
|
ISO TS 13399-5 |
Cutting tool data representation and exchange Part 5: Reference dictionary for assembly items-First Edition |
|
ISO 1071 |
Welding consumables Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron Classification-Second Edition |
|
ISO 10887 |
Key Type Three-Jaw Drill Chucks - Specification-First Edition |
|
ISO 11471 |
Agricultural Tractors and Machinery - Coding of Remote Hydraulic Power Services and Controls First Edition |
|
ISO 12488-1 |
Cranes Tolerances for wheels and travel and traversing tracks Part 1: General-First edition; Supercedes ISO 8306:1985 |
|
ISO 14137 |
Machine Tools - Test Conditions for Wire Electrical-Discharge Machines (Wire EDM) - Terminology and Testing of the Accuracy-First Edition |
|
ISO 14401-1 |
Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 1: Test methods-First Edition |
|
ISO 1506 |
Textile Machinery - Dyeing, Finishing and Allied Machinery - Classification and Nomenclature-First Edition |
|
ISO 155 |
Belt Drives - Pulleys - Limiting Values for Adjustment of Centres-Third Edition |
|
ISO 15531-1 |
Industrial automation systems and integration Industrial manufacturing management data Part 1: General overview-First Edition |
|
ISO 15601 |
Hammers - Technical Specifications Concerning Steel Hammer Heads - Test Procedures-First Edition |
|
ISO 15614-10 |
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 10: Hyperbaric dry welding-First Edition |
|
ISO 15616-1 |
Acceptance Tests for CO2-Laser Beam Machines for High Quality Welding and Cutting - Part 1: General Principles, Acceptance Conditions-First Edition |
|
ISO 1992-3 |
Commercial Refrigerated Cabinets - Methods of Test - Part 3: Temperature Test-First Edition; Amendment 1-1980 |
|
ISO 21485 |
Textile machinery Draw frame for cotton spinning Vocabulary and principles of construction-First Edition |
|
ISO 2410 |
Household Refrigerators - Methods of Test for the Information of the Consumer-First Edition |
|
ISO 252-1 |
Textile Conveyor Belts - Adhesive Strength between Constitutive Elements - Part 1: Methods of Test-First Edition; Partially Replaces ISO 252: 1988; Corrigendum 1: 11/15/2006 |
|
ISO 2780 |
Milling cutters with tenon drive Interchangeability dimensions for cutter arbors Metric series-Third Edition |
|
ISO 3002-5 |
Basic Quantities in Cutting and Grinding - Part 5: Basic Terminology for Grinding Processes Using Grinding Wheels First Edition |
|
ISO 3293 |
Morse Taper Shank Countersinks for Angles 60 Degrees, 90 Degrees and 120 Degrees Inclusive First Edition |
|
ISO 3767-4 |
Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other Displays - Part 4: Symbols for Forestry Machinery - Amendment 1: Additional Symbols-First Edition; Amendment 1 10/01/2000 |
|
ISO 3859 |
Inverse Dovetail Cutters and Dovetail Cutters with Cylindrical Shanks-Third Edition |
|
ISO 4004 |
Agricultural Tractors and Machinery - Track Widths First Edition |
|
ISO 476 |
Textile Machinery and Accessories - Pirn Winding Machines - Vocabulary-First Edition |
|
ISO 5285 |
Conveyor belts Guidelines for storage and handling-Second Edition |
|
ISO 5289 |
Agricultural Machinery - Endless Hexagonal Belts and Groove Sections of Corresponding Pulleys Second Edition |
|
ISO 5742 |
Pliers and nippers Nomenclature-Second Edition |
|
ISO 669 |
Resistance Welding - Resistance Welding Equipment - Mechanical and Electrical Requirements-Second Edition * Corrected and Reprinted 03/15/2001 |
|
ISO 6750 |
Earth-moving machinery - Operator s manual - Content and format-Third Edition |
|
ISO 6983-1 |
Numerical Control of Machines - Program Format and Definition of Address Words - Part 1: Data Format for Positioning, Line Motion and Contouring Control Systems-First Edition |
|
ISO 6986 |
Side and Face Milling (Slotting) Cutters with Indexable Inserts - Dimensions First Edition; (ANSI 6986-1983) |
|
ISO 7296-3 |
Cranes Graphical symbols Part 3: Tower cranes-First Edition |
|
ISO 7752-2 |
Lifting Appliances - Controls - Layout and Characteristics - Part 2: Basic Arrangement and Requirements for Mobile Cranes-First Edition; Addendum 1: 1986 |
|
ISO 789-9 |
Agricultural Tractors - Test Procedures - Part 9: Power Tests for Drawbar-First Edition; Amendment 1-1993 |
|
ISO 7947 |
Woodworking Machines - Two-, Three-and Four-Side Moulding Machines - Nomenclature and Acceptance Conditions First Edition |
|
ISO 7958 |
Woodworking Machines - Single Blade Stroke Circular Sawing Machines for Lengthwise Cutting of Solid Woods and Panels - Nomenclature and Acceptance Conditions First Edition |
|
ISO 8017 |
Tools for moulding Guide pillars, straight and shouldered, and locating guide pillars, shouldered-Second Edition |
|
ISO 9373 |
Cranes and Related Equipment - Accuracy Requirements for Measuring Parameters During Testing First Edition |
|
ISO 9606-2 |
Qualification test of welders Fusion welding Part 2: Aluminium and aluminium alloys-Second Edition |
|
ISO TR 19961 |
Cranes Safety code on mobile cranes-First Edition |
|
ISO 10245-3 |
Cranes Limiting and indicating devices Part 3: Tower cranes-Second Edition |
|
ISO 10245-5 |
Cranes - Limiting and Indicating Devices - Part 5: Overhead Travelling and Portal Bridge Cranes First Edition |
|
ISO 10303-240 |
Industrial automation systems and integration Product data representation and exchange Part 240: Application protocol: Process plans for machined products-First Edition |
|
ISO 10448 |
Agricultural Tractors - Hydraulic Pressure for Implements First Edition |
|
ISO 1049 |
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Vibrating Conveyors and Feeders with Rectangular or Trapezoidal Trough-First Edition |
|
ISO 10726 |
Portable Chain-Saws - Chain Catcher - Dimensions and Mechanical Strength First Edition |
|
ISO 10791-1 |
Test Conditions for Machining Centres - Part 1: Geometric Tests for Machines with Horizontal Spindle and with Accessory Heads (Horizontal Z-Axis)-First Edition; Corrected and Reprinted 05/01/1999 |
|
ISO 10882-1 |
Health and Safety in Welding and Allied Processes - Sampling of Airborne Particles and Gases in the Operator s Breathing Zone - Part 1: Sampling of Airborne Particles-First Edition |
|
ISO 11681-1 AMD 1 |
Machinery for forestry Portable chainsaw safety requirements and testing Part 1: Chain-saws for forest service AMENDMENT 1: Balance-Second Edition |
|
ISO 11784 |
Radio-Frequency Identification of Animals - Code Structure-Second Edition; Amendment 1:11/15/2004 |
|
ISO 11785 |
Radio-Frequency Identification of Animals - Technical Concept First Edition |
|
ISO 12046 |
Synchronous Belt Drives - Automotive Belts - Determination of Physical Properties First Edition |
|
ISO 13202 |
Cranes - Measurement of Velocity and Time Parameters-First Edition |
|
ISO 13851 |
Safety of Machinery - Two-Hand Control Devices - Functional Aspects and Design Principles-First Edition |
|
ISO 13856-1 |
Safety of Machinery - Pressure-Sensitive Protective Devices - Part 1: General Principles for Design and Testing of Pressure-Sensitive Mats and Pressure-Sensitive Floors-First Edition |
|
ISO 13856-2 |
Safety of machinery Pressuresensitive protective devices Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars-First Edition |
|
ISO 14119 AMD 1 |
Safety of Machinery - Interlocking Devices Associated with Guards - Principles for Design and Selection AMENDMENT 1: Design to minimize defeat possibilities-First Edition |
|
ISO 15614-6 |
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 6: Arc and gas welding of copper and its alloys-First Edition |
|
ISO 15616-3 |
Acceptance Tests for CO2-Laser Beam Machines for High Quality Welding and Cutting - Part 3: Calibration of Instruments for Measurement of Gas Flow and Pressure-First Edition |
|
ISO 17658 |
Welding - Imperfections in Oxyfuel Flame Cuts, Laser Beam Cuts and Plasma Cuts - Terminology-First Edition |
|
ISO 2238 |
Machine Bridge Reamers-First Edition |
|
ISO 2374 |
Lifting Appliances - Range of Maximum Capacities for Basic Models-First Edition |
|
ISO 2492 |
Thin Taper Keys with or without Gib Head and Their Corresponding Keyways (Dimensions in Millimetres)-First Edition |
|
ISO 255 |
Belt Drives - Pulleys for V-Belts (System Based on Datum Width) - Geometrical Inspection of Grooves-Second Edition |
|
ISO 297 |
7/24 Tapers for Tool Shanks for Manual Changing-Second Edition |
|
ISO 3002-2 |
Basic Quantities in Cutting and Grinding - Part 2: Geometry of the Active Part of Cutting Tools - General Conversion Formulae to Relate Tool and Working Angles First Edition |
|
ISO 3002-3 |
Basic Quantities in Cutting and Grinding - Part 3: Geometric and Kinematic Quantities in Cutting First Edition |
|
ISO 3408-1 |
Ball screws Part 1: Vocabulary and designation-Second Edition |
|
ISO 3767-5 |
Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other Displays - Part 5: Symbols for Manual Portable Forestry Machinery-First Edition; Amendment 1:06-01-2001 |
|
ISO 5179 |
Investigation of Brazeability Using a Varying Gap Test Piece First Edition |
|
ISO 5187 |
Welding and Allied Processes - Assemblies Made with Soft Solders and Brazing Filler Metals - Mechanical Test Methods First Edition |
|
ISO 525 |
Bonded Abrasive Products - General Requirements-Third Edition |
|
ISO 5291 |
Belt Drives - Grooved Pulleys for Joined Classical V-Belts - Groove Sections AJ, BJ, CJ and DJ (Effective System) Second Edition |
|
ISO 5419 |
Twist Drills - Terms, Definitions and Types-First Edition; Corrigendum 1- 1996 |
|
ISO 5669 |
Agricultural Trailers and Trailed Equipment - Braking Cylinders - Specifications First Edition; (Corrected and Reprinted - 1984) |
|
ISO 6015 |
Earth-moving machinery Hydraulic excavators and backhoe loaders Methods of determining tool forces-Second Edition |
|
ISO 6261 |
Boring Bars (Tool Holders with Cylindrical Shank) for Indexable Inserts - Designation Second Edition |
|
ISO 723 |
Rock Drilling Equipment - Forged Collared Shanks and Corresponding Chuck Bushings for Hollow Hexagonal Drill Steels-Second Edition |
|
ISO 7752-3 |
Cranes - Controls - Layout and Characteristics - Part 3: Tower Cranes First Edition |
|
ISO 789-6 |
Agricultural Tractors - Test Procedures - Part 6: Centre of Gravity-First Edition; Amendment 1-1996 |
|
ISO 789-8 |
Agricultural Tractors - Test Procedures - Part 8: Engine Air Cleaner-First Edition |
|
ISO 8018 |
Tools for moulding Guide bushes, headed, and locating guide bushes, headed-Second Edition |
|
ISO 8566-5 |
Cranes - Cabins - Part 5: Overhead Travelling and Portal Bridge Cranes First Edition |
|
ISO 8573-6 |
Compressed air Part 6: Test methods for gaseous contaminant content-First Edition |
|
ISO 8573-7 |
Compressed air Part 7: Test method for viable microbiological contaminant content-First Edition |
|
ISO 8764-1 |
Assembly tools for screws and nuts Screwdrivers for cross-recessed head screws Part 1: Driver tips-Third Edition |
|
ISO 8927 |
Earth-Moving Machinery - Machine Availability - Vocabulary First Edition |
|
ISO 9011 |
Synchronous Belt Drives - Automotive Pulleys-Second Edition |
|
ISO 9191 |
Lawn and Garden Ride-on (Riding) Tractors - Three-Point Hitch First Edition |
|
ISO 9449 |
Tools for moulding Centring sleeves-Second Edition |
|
ISO 9692-3 |
Welding and Allied Processes - Recommendations for Joint Preparation - Part 3: Metal Inert Gas Welding and Tungsten Inert Gas Welding of Aluminium and its Alloys-First Edition |
|
ISO 9926-1 |
Cranes - Training of Drivers - Part 1: General First Edition |
|
ISO TR 25599 |
Cranes Jib cranes International Standards for design, manufacturing, use and maintenance requirements and recommendations-First Edition |
|
ISO 10262 |
Earth-Moving Machinery - Hydraulic Excavators - Laboratory Tests and Perfomance Requirements for Operator Protective Guards-First Edition |
|
ISO 10564 |
Soldering and Brazing Materials - Methods for the Sampling of Soft Solders for Analysis First Edition |
|
ISO 10791-6 |
Test Conditions for Machining Centres - Part 6: Accuracy of Feeds, Speeds and Interpolations-First Edition; Technical Corrigendum 1:4/1/2004 |
|
ISO 1082 |
Mining - Shackle Type Connector Units for Chain Conveyors-Second Edition |
|
ISO 10972-3 |
Cranes Requirements for mechanisms Part 3: Tower cranes-First Edition |
|
ISO 10972-4 |
Cranes Requirements for mechanisms Part 4: Jib cranes-First Edition |
|
ISO 10972-5 |
Cranes Requirements for mechanisms Part 5: Bridge and gantry cranes-First Edition |
|
ISO 11001-4 |
Agricultural Wheeled Tractors and Implements - Three-Point Hitch Couplers - Part 4: Bar Coupler |
|
ISO 12003-2 |
Agricultural and Forestry Tractors - Narrow-Track Wheeled Tractors - Part 2: Rear-Mounted Roll-Over Protective Structures-First Edition |
|
ISO 12478-1 |
Cranes - Maintenance Manual - Part 1: General-First Edition |
|
ISO 12480-4 |
Cranes Safe use Part 4: Jib cranes-First edition |
|
ISO 12488-4 |
Cranes Tolerances for wheels and travel and traversing tracks Part 4: Jib cranes-First Edition |
|
ISO 13584-42 |
Industrial Automation Systems and Integration - Parts Library - Part 42: Description Methodology: Methodology for Structuring Part Families-First Edition; Technical Corrigendum 1: 01/15/2003 |
|
ISO 13772 |
Forestry Machinery - Portable Chain-Saws - Non-Manually Actuated Chain Brake Performance-Second Edition |
|
ISO 13919-2 |
Welding - Electron and Laser Beam Welded Joints - Guidance on Quality Levels for Imperfections - Part 2: Aluminium and its Weldable Alloys-First Edition |
|
ISO 14174 |
Welding consumables Fluxes for submerged arc welding Classification-First Edition |
|
ISO 14649-12 |
Industrial automation systems and integration Physical device control Data model for computerized numerical controllers Part 12: Process data for turning-First Edition |
|
ISO 14890 CORR 1 |
Information technology Multimedia content description interface Part 5: Multimedia description schemes TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 15011-2 |
Health and safety in welding and allied processes Laboratory method for sampling fume and gases generated by arc welding Part 2: Determination of emission rates of gases, except ozone-First Edition |
|
ISO 1536 |
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Troughed Belt Conveyors (Other Than Portable Conveyors) - Belt Pulleys-First Edition |
|
ISO 15614-13 |
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Resistance butt and flash welding-First Edition |
|
ISO 15641 |
Milling Cutters for High Speed Machining - Safety Requirements-First Edition |
|
ISO 15745-5 |
Industrial automation systems and integration Open systems application integration framework Part 5: Reference description for HDLC-based control systems-First Edition |
|
ISO 1604 |
Belt Drives - Endless Wide V-Belts for Industrial Speed-Changers and Groove Profiles for Corresponding Pulleys-Second Edition |
|
ISO 1711-2 |
Assembly tools for screws and nuts - Technical specifications - Part 2: Machine-operated sockets ( |
|
ISO 17660-2 |
Welding Welding of reinforcing steel Part 2: Non load-bearing welded joints-First Edition |
|
ISO 18278-1 |
Resistance welding Weldability Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials-First Edition |
|
ISO 1992-8 |
Commercial Refrigerated Cabinets - Test Methods - Part VIII: Test for Accidental Mechanical Contact-First Edition |
|
ISO 20726 |
Textile machinery Hopper feeders for cotton spinning Vocabulary and principles of construction-First Edition |
|
ISO 2140 |
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Apron Conveyors-First Edition |
|
ISO 21467 |
Earth-moving machinery Horizontal directional drills Terminology and specifications-First Edition |
|
ISO 22827-2 |
Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 2: Moving mechanism-First Edition |
|
ISO 252 |
Conveyor belts Adhesion between constitutive elements Test methods-Third Edition |
|
ISO 2586 |
Shell End Mills with Plain Bore and Tenon Drive - Metric Series-Second Edition |
|
ISO 3002-4 |
Basic Quantities in Cutting and Grinding - Part 4: Forces, Energy, Power First Edition |
|
ISO 3117 |
Tangential Keys and Keyways First Edition |
|
ISO 3286 |
Single Point Cutting Tools - Corner Radii First Edition |
|
ISO 3581 |
Welding Consumables - Covered Electrodes for Manual Metal Arc Welding of Stainless and Heat-Resisting Steels - Classification-Second Edition |
|
ISO 3767-3 |
Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other Displays - Part 3: Symbols for Powered Lawn and Garden Equipment Second Edition-CEN EN ISO 3767-3: 1996 |
|
ISO 3776-2 |
Tractors and machinery for agriculture Seat belts Part 2: Anchorage strength requirements-First edition |
|
ISO 4254-5 |
Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety - Part 5: Power-Driven Soil-Working Equipment First Edition |
|
ISO 6746-2 CORR 1 |
Earth-moving machinery Definitions of dimensions and codes Part 2: Equipment and attachments TECHNICAL CORRIGENDUM 1-Third Edition |
|
ISO 6972 |
Cranked-Link Mill Chains of Welded Construction, Attachments and Sprockets-Second Edition |
|
ISO 7296-2 |
Cranes - Graphical Symbols - Part 2: Mobile Cranes-First Edition |
|
ISO 7752-5 |
Lifting Appliances - Controls - Layout and Characteristics - Part 5: Overhead Travelling Cranes and Portal Bridge Cranes First Edition |
|
ISO 7839 |
Textile Machinery and Accessories - Knitting Machines - Vocabulary and classification-Second Edition |
|
ISO 789-7 |
Agricultural Tractors - Test Procedures - Part 7: Axle Power Determination-First Edition |
|
ISO 7946 |
Woodworking Machines - Slot Mortising Machines - Nomenclature and Acceptance Conditions First Edition |
|
ISO 7950 |
Woodworking Machines - Single Chain Mortising Machines - Nomenclature and Acceptance Conditions First Edition |
|
ISO 7983 |
Woodworking Machines - Single Blade Circular Sawing Machines with Travelling Table - Nomenclature and Acceptance Conditions First Edition |
|
ISO 8116-1 |
Textile Machinery and Accessories - Beams for Winding - Part 1: General Vocabulary Second Edition |
|
ISO 8188 |
Textile Machinery and Accessories - Pitches of Knitting Machines-Second Edition |