|
ISO 10791-9 |
Test Conditions for Machining Centres - Part 9: Evaluation of the Operating Times of Tool Change and Pallet Change-First Edition |
|
ISO 10882-2 |
Health and Safety in Welding and Allied Processes - Sampling of Airborne Particles and Gases in the Operator s Breathing Zone - Part 2: Sampling of Gases-First Edition |
|
ISO 10889-2 |
Tool Holders with Cylindrical Shank - Part 2: Type A, Shanks for Tool Holders of Special Designs-Second Edition |
|
ISO 1150 |
Textile Machinery and Accessories - Drop Wires for Warp Stop Motions for Weaving Machines with Automatic Drawing-In-Second Edition |
|
ISO 11783-13 |
Tractors and machinery for agriculture and forestry Serial control and communications data network Part 13: File server-First Edition |
|
ISO 1180 |
Shanks for Pneumatic Tools and Dimensions of Chuck Bushings-First Edition; Addendum 1-1985; NZS/ISO 1180: 1983 |
|
ISO 12166 |
Resistance Welding Equipment - Particular Specifications Applicable to Transformers with One Secondary Winding for Multi-Spot Welding, as Used in the Automobile Industry-First Edition |
|
ISO 12210-1 |
Cranes - Anchoring Devices for In-Service and Out-of-Service Conditions - Part 1: General-First Edition |
|
ISO 12210-4 |
Cranes - Anchoring Devices for In-Service and Out-Of-Service Conditions - Part 4: Jib Cranes-Corrigendum 1: 2000; First Edition |
|
ISO 13041-5 |
Test conditions for numerically controlled turning machines and turning centres Part 5: Accuracy of feeds, speeds and interpolations-First Edition |
|
ISO 13584-31 |
Industrial Automation Systems and Integration - Parts Library - Part 31: Implementation Resources: Geometric Programming Interface-First Edition |
|
ISO 14269-2 |
Tractors and Self-Propelled Machines for Agriculture and Forestry - Operator Enclosure Environment - Part 2: Heating, Ventilation and Air-Conditioning Test Method and Performance-First Edition; Along with Other Parts of ISO 14269, Cancels and Replaces ISO 3737: 1976, ISO 6097: 1989 and ISO/TR 8953: 1987 |
|
ISO 14272 |
Specimen Dimensions and Procedure for Cross Tension Testing Resistance Spot and Embossed Projection Welds-First Edition |
|
ISO 14343 |
Welding Consumables - Wire Electrodes, Wires and Rods for Arc Welding of Stainless and Heat Resisting Steels - Classification-First Edition |
|
ISO 14500 |
Textile machinery and accessories Harnesses for Jacquard weaving machines Vocabulary-First Edition |
|
ISO 14539 |
Manipulating Industrial Robots - Object Handling with Grasp-Type Grippers - Vocabulary and Presentation of Characteristics-First Edition |
|
ISO 15011-3 |
Health and safety in welding and allied processes Laboratory method for sampling fume and gases generated by arc welding Part 3: Determination of ozone concentration using fixed point measurements-First Edition |
|
ISO 15236-3 |
Steel cord conveyor belts Part 3: Special safety requirements for belts for use in underground installations-First Edition |
|
ISO 15744 |
Hand-Held Non-Electric Power Tools - Noise Measurement Code - Engineering Method (Grade 2)-First Edition |
|
ISO 15745-3 |
Industrial automation systems and integration Open systems application integration framework Part 3: Reference description for IEC 61158-based control systems-First Edition |
|
ISO 15817 |
Earth-moving machinery - Safety requirements for remote operator control-First Edition |
|
ISO 15873 |
Irrigation Equipment - Differential Pressure Ventrui-Tyope Liquid Additive Injectors-First Edition |
|
ISO 16100-3 |
Industrial automation systems and integration Manufacturing software capability profiling for interoperability Part 3: Interface services, protocols and capability templates-First Edition |
|
ISO 1641-2 |
End Mills and Slot Drills - Part II: Milling Cutters with Morse Taper Shanks-First Edition |
|
ISO 1651 |
Tube Drawing Mandrels-First Edition; Amendment 1-1982 |
|
ISO 16851 |
Textile conveyor belts Determination of the net length of an endless (spliced) conveyor belt-First Edition |
|
ISO 17643 |
Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis-First Edition |
|
ISO 18278-2 |
Resistance welding Weldability Part 2: Alternative procedures for the assessment of sheet steels for spot welding-First Edition |
|
ISO 18594 |
Resistance spot-, projection- and seamwelding Method for determining the transition resistance on aluminium and steel material-First Edition |
|
ISO 18629-14 |
Industrial automation systems and integration Process specification language Part 14: Resource theories-First Edition |
|
ISO 18893 |
Mobile elevating work platforms Safety principles, inspection, maintenance and operation-First Edition |
|
ISO 20727 |
Textile machinery Mixing bale openers for cotton spinning Vocabulary and principles of construction-First Edition |
|
ISO 20966 |
Automatic milking installations Requirements and testing-First Edition |
|
ISO 21183-2 |
Light conveyor belts Part 2: List of equivalent terms-First Edition |
|
ISO 22827-1 |
Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 1: Laser assembly-First Edition |
|
ISO 22867 CORR 1 |
Forestry machinery Vibration test code for portable hand-held machines with internal combustion engine Vibration at the handles TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 239 |
Drill Chuck Tapers-Second Edition |
|
ISO 2729 |
Woodworking Tools - Chisels and Gouges Second Edition |
|
ISO 2787 |
Rotary and Percussive Pneumatic Tools - Performance Tests Second Edition |
|
ISO 283 |
Textile conveyor belts Full thickness tensile strength, elongation at break and elongation at the reference load Test method-Third Edition |
|
ISO 2940-1 |
Milling Cutters Mounted on Centring Arbors Having a 7/24 Taper - Fitting Dimensions - Centring Arbors First Edition; (Erratum-1977) |
|
ISO 3408-3 |
Ball screws Part 3: Acceptance conditions and acceptance tests-Second Edition |
|
ISO 3439 |
Subland Twist Drills with Cylindrical Shanks for Holes Prior to Tapping Screw Threads-Second Edition |
|
ISO 366-5 |
Textile machinery and accessories Reeds Part 5: Dimensions and designation of profile capsules-First Edition |
|
ISO 3835-1 |
Equipment for Vine Cultivation and Wine Making - Vocabulary - Part I First Edition |
|
ISO 3835-5 |
Equipment for Vine Cultivation and Wine Making - Vocabulary - Part 5 First Edition |
|
ISO 3870 |
Conveyor Belts (Fabric Carcass), with Length Between Pulley Centres up to 300 m, for Loose Bulk Materials - Adjustment of Take-Up Device First Edition |
|
ISO 4347 |
Leaf chains, clevises and sheaves Dimensions, measuring forces and tensile strengths-Fourth Edition |
|
ISO 4703 |
Test Conditions for Surface Grinding Machines with Two Columns - Machines for Grinding Slideways - Testing of Accuracy-Third Edition |
|
ISO 5172 |
Gas welding equipment Blowpipes for gas welding, heating and cutting Specifications and tests-Third Edition;:1995 |
|
ISO 521 |
Machine Chucking Reamers with Parallel Shanks or Morse Taper Shanks-First Edition |
|
ISO 5414-2 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools Part 2: Connecting dimensions of chucks and designation |
|
ISO 5421 |
Ground High Speed Steel Tool Bits First Edition |
|
ISO 5679 |
Equipment for Working the Soil - Disks - Classification, Main Fixing Dimensions and Specifications First Edition |
|
ISO 5682-1 |
Equipment for Crop Protection - Spraying Equipment - Part 1: Test Methods for Sprayer Nozzles-Second Edition |
|
ISO 5682-2 |
Equipment for Crop Protection - Spraying Equipment - Part 2: Test Methods for Hydraulic Sprayers-Second Edition |
|
ISO 5687 |
Equipment for Harvesting - Combine Harvesters - Determination and Designation of Grain Tank Capacity and Unloading Device Performance-Second Edition |
|
ISO 5702 |
Equipment for Harvesting - Combine Harvester Component Parts - Equivalent Terms First Edition |
|
ISO 583 |
Conveyor belts with a textile carcass Total belt thickness and thickness of constitutive elements Test methods-Third Edition |
|
ISO 5967 |
Taps and Thread Cutting - Nomenclature of the Main Types and Terminology First Edition |
|
ISO 6012 |
Earth-Moving Machinery - Service Instrumentation-Fourth Edition; BS 6913: Part 4: 1997 |
|
ISO 6173 |
Open-End Spinning Machines - Vocabulary First Edition |
|
ISO 6177 |
Textile Machinery - Cloth Rollers - Terminology and Main Dimensions Second Edition |
|
ISO 6532 |
Portable Chain Saws - Technical Data Second Edition; (Corrected and Reprinted - 1994) |
|
ISO 6533 |
Forestry Machinery - Portable Chain-Saw Front Hand-Guard - Dimensions and Clearances-Third Edition |
|
ISO 6535 |
Portable chain-saws Chain brake performance-Second Edition; Technical Corrigendum 1: 9/1/2004 |
|
ISO 6747 |
Earth-moving machinery Tractor-dozers Terminology and commercial specifications-Third Edition; Amendment 1: 05/01/2003 |
|
ISO 693 |
Dimensions of Seam Welding Wheel Blanks-First Edition |
|
ISO 702-4 |
Machine tools Connecting dimensions of spindle noses and work holding chucks Part 4: Cylindrical connection-First Edition |
|
ISO 7136 |
Earth-moving machinery Pipelayers Terminology and commercial specifications-Third Edition |
|
ISO 7183 |
Compressed-air dryers Specifications and testing-Second edition |
|
ISO 7571 |
Woodworking Machines - Surface Planing Machines with Cutterblock for One-Side Dressing - Nomenclature and Acceptance Conditions First Edition |
|
ISO 7752-4 |
Cranes - Controls - Layout and Characteristics - Part 4: Jib Cranes First Edition |
|
ISO 789-4 |
Agricultural Tractors - Test Procedures - Part 4: Measurement of Exhaust Smoke-Second Edition |
|
ISO 7988 |
Woodworking Machines - Double-End Tenoning Machines - Nomenclature and Acceptance Conditions First Edition |
|
ISO 8016 |
Machinery for Agriculture - Wheels with Integral Hub First Edition |
|
ISO 8026 |
Agricultural Irrigation Equipment - Sprayers - General Requirements and Test Methods-Second Edition; Amendment 1: 06-15-2000 |
|
ISO 8115-2 |
Bales - Part 2: Bales of Man-Made Staple Fibres - Dimensions First Edition |
|
ISO 8119-2 |
Textile Machinery and Accessories - Needles for Knitting Machines - Terminology - Part 2: Bearded Needles First Edition |
|
ISO 8119-3 |
Textile Machinery and Accessories - Needles for Knitting Machines - Terminology - Part 3: Compound Needles First Edition |
|
ISO 8167 |
Projections for Resistance Welding First Edition |
|
ISO 8370-1 |
Belt Drives - Dynamic Test to Determine Pitch Zone Location - Part 1: V-Belts First Edition |
|
ISO 8370-2 |
Belt Drives - Dynamic Test to Determine Pitch Zone Location - Part 2: V-Ribbed Belts First Edition |
|
ISO 8566-4 |
Cranes - Cabins - Part 4: Jib Cranes-First Edition |
|
ISO 8636-1 |
Machine Tools - Test Conditions for Bridge-Type Milling Machines - Testing of the Accuracy - Part 1: Fixed Bridge (Portal-Type) Machines-Second Edition |
|
ISO 8662-11 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 11: Fastener Driving Tools-First Edition; Amendment 1 12/01/2001 |
|
ISO 8811 |
Earth-Moving Machinery - Rollers and Compactors - Terminology and Commercial Specifications-First Edition; Technical Corrigendum 1: 02/01/2002 |
|
ISO 883 |
Indexable Hardmetal (Carbide) Inserts with Rounded Corners, without Fixing Hole - Dimensions-Third Edition |
|
ISO 8830 |
High-Speed Steel Machine Taps with Ground Threads - Technical Specifications First Edition |
|
ISO 8910 |
Machinery and Equipment for Working the Soil - Mouldboard Plough Working Elements - Vocabulary Second Edition |
|
ISO 9012 |
Gas welding equipment Air-aspirated hand blowpipes Specifications and tests-Third Edition |
|
ISO 9193 |
Lawn and Garden Ride-on (Riding) Tractors - Power Take-off First Edition |
|
ISO 9266 |
Woodworking Machines - Universal Tool and Cutter Sharpeners - Nomenclature First Edition |
|
ISO 9398-1 |
Specifications for Industrial Laundry Machines - Definitions and Testing of Capacity and Consumption Characteristics - Part 1: Flatwork Ironing Machines-Second Edition |
|
ISO 9398-2 |
Specifications for Industrial Laundry Machines - Definitions and Testing of Capacity and Consumption Characteristics - Part 2: Batch Drying Tumblers-Second Edition |
|
ISO 9409-1 |
Manipulating industrial robots Mechanical interfaces Part 1: Plates-Third Edition |
|
ISO 9415 |
Woodworking Machines - Wide Belt Sanding Machines - Nomenclature First Edition |
|
ISO 9448-11 |
Tools for Pressing - Guide Bushes - Part 11: Form F, Ball Cage Bushes, Flanged, Type 2 First Edition |
|
ISO 9452 |
Woodworking Machines - Crosswise Veneer Splicing Machines - Nomenclature First Edition |
|
ISO 9467 |
Forestry Machinery - Portable Chain-Saws and Brush-Cutters - Exhaust System-Caused Fire Risk First Edition |
|
ISO 9537 |
Woodworking Machines - Single-End Edge Bonding Machines - Nomenclature First Edition |
|
ISO 9558 |
Woodworking Machines - Veneer Slicing Machines - Nomenclature First Edition |
|
ISO 9566 |
Woodworking Machines - Single-End Tenoning Machines with Several Spindles - Nomenclature First Edition |
|
ISO 9567 |
Woodworking Machines - Horizontal Shredding Machines for Wood Wool Production, Quadruple Effect - Nomenclature First Edition |
|
ISO 9615 |
Woodworking Machines - Vertical Shredding Machines for Wood Wool Production, with Hydraulic Clamping - Nomenclature First Edition |
|
ISO 9617 |
Woodworking Machines - Lifting Tables and Stages - Nomenclature First Edition |
|
ISO 9942-1 |
Cranes - Information Labels - Part 1: General First Edition |
|
ISO DIS 10303-28 |
Industrial automation systems and integration Product data representation and exchange Part 28: Implementation methods: XML representations of EXPRESS schemas and data |
|
ISO TR 18569 |
Safety of machinery Guidelines for the understanding and use of safety of machinery standards-First Edition |
|
ISO TR 20174 |
Welding Grouping systems for materials Japanese materials-First edition |
|
ISO TR 25398 |
Earth-moving machinery Guidelines for assessment of exposure to whole-body vibration of ride-on machines Use of harmonized data measured by international institutes, organizations and manufacturers-First Edition |
|
ISO TR 8435 |
Continuous Mechanical Handling Equipment - Safety Code for Belt Conveyors - Examples for Protection of Pinch Points on Idlers First Edition |
|
ISO TS 10303-1009 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1009: Application Module: Shape Appearance and Layers-First Edition |
|
ISO TS 15696 |
Cranes - List of Equivalent Terms-First Edition |
|
ISO TS 17104 |
Rotary tool for threaded fasteners Hydraulic impulse tools Performance test method-First Edition |
|
ISO TS 21108 |
Hand-held power tools Impulse wrenches Dimensions and tolerances of interface to power socket-First edition |
|
ISO TS 9250-1 |
Earth-moving machinery Multilingual listing of equivalent terms Part 1: General-First Edition |
|
ISO 10098 |
Wireline Diamond Core Drilling Equipment - System CSSK First Edition |
|
ISO 10245-2 |
Cranes - Limiting and Indicating Devices - Part 2: Mobile Cranes First Edition |
|
ISO 10266 |
Earth-Moving Machinery - Determination of Slope Limits for Machine Fluid Systems Operation - Static Test Method First Edition |
|
ISO 10303-505 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 505: Application Interpreted Construct: Drawing Structure and Administration-First Edition |
|
ISO 10303-512 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 512: Application Interpreted Construct: Faceted Boundary Representation-First Edition |
|
ISO 1036 |
Textile Machinery - Dyeing and Finishing Machines - Definition of Left and Right Sides-Second Edition |
|
ISO 10791-2 |
Test Conditions for Machining Centres - Part 2: Geometric Tests for Machines with Vertical Spindle or Universal Heads with Vertical Primary Rotary Axis (Vertical Z-Axis)-First Edition |
|
ISO 10889-6 |
Tool Holders with Cylindrical Shank - Part 6: Type E, with Cylindrical Seat-Second Edition |
|
ISO 10889-8 |
Tool Holders with Cylindrical Shank - Part 8: Type Z, Accessories-First Edition |
|
ISO 10899 |
High-Speed Steel Two-Flute Twist Drills - Technical Specifications-First Edition |
|
ISO 10910 |
Classification and Designation of Approximate Chip Control Zones for Indexable Inserts with Chipbreakers First Edition |
|
ISO 10914 |
Assembly Tools for Screws and Nuts - Sockets and Wrenches for Spline Drive-First Edition |
|
ISO 11660-5 |
Cranes - Access, Guards and Restraints - Part 5: Bridge and Gantry Cranes-First Edition |
|
ISO 11661 |
Mobile Cranes - Presentation of Rated Capacity Charts-First Edition |
|
ISO 11749 |
Belt Drive - V-Ribbed Belts for the Automotive Industry - Fatigue Test-First Edition; Technical Corrigendum 1: 4/01/2003 |
|
ISO 13860 |
Machinery for Forestry - Forwarders - Terms, Definitions and Commercial Specifications-First Edition |
|
ISO 14171 |
Welding consumables Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels Classification-Frist Edition |
|
ISO 14323 |
Resistance spot welding and projection welds Destructive testing of welds Specimen dimensions and procedure for impact shear test and cross-tension testing-First Edition |
|
ISO 14555 |
Welding - Arc Stud Welding of Metallic Materials-Second Ediiton |
|
ISO 15296 |
Gas welding equipment Vocabulary Terms used for gas welding equipment-First Edition |
|
ISO 1535 |
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Troughed Belt Conveyors (Other Than Portable Conveyors) - Belts-First Edition |
|
ISO 1537 |
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Troughed Belt Conveyors (Other Than Portable Conveyors) - Idlers-First Edition |
|
ISO 15442 |
Cranes Safety requirements for loader cranes-First Editon |
|
ISO 15618-2 |
Qualification Testing of Welders for Underwater Welding - Part 2: Diver-Welders and Welding Operators for Hyperbaric Dry Welding-First Edition |
|
ISO 16156 |
Machine-tools safety Safety requirements for the design and construction of work holding chucks-First Edition |
|
ISO 1701-1 |
Test conditions for milling machines with table of variable height Testing of the accuracy Part 1: Machines with horizontal spindle-First Edition; Replaces ISO 1701-0: 6/1/1984 and ISO 1701-3:12/15/97 |
|
ISO 17103 |
Agricultural Machinery - Rotary and Flail Mowers - Test Methods and Acceptance Criteria for Protective Skirts-First Edition |
|
ISO 17612 |
Tractors and machinery for agriculture and forestry Auxiliary-power transmission connector for the operator station-First Edition |
|
ISO 17632 |
Welding consumables Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels Classification-First edition |
|
ISO 1807 |
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Oscillating Conveyors and Shaking or Reciprocating Feeders with Rectangular or Trapezoidal Trough-First Edition |
|
ISO 1809 |
Textile Machinery and Accessories - Types of Formers for Yarn Packages - Nomenclature-First Edition |
|
ISO 20725 |
Textile machinery Condensers for cotton spinning Vocabulary and principles of construction-First Edition |
|
ISO 2351-1 |
Assembly tools for screws and nuts Machine-operated screwdriver bits Part 1: Screwdriver bits for slotted head screws-Second Edition |
|
ISO 237 |
Rotating Tools with Parallel Shanks - Diameters of Shanks and Sizes of Driving Squares-First Edition |
|
ISO 238 |
Reduction Sleeves and Extension Sockets for Tools with Morse Taper Shanks-First Edition |
|
ISO 2503 |
Gas Welding Equipment - Pressure Regulators for Gas Cylinders Used in Welding, Cutting and Allied Processes up to 300 bar-Third Edition |
|
ISO 284 |
Conveyor Belts - Electrical Conductivity - Specification and Test Method-Third Edition |
|
ISO 3314 |
Shell Drills with Taper Bore (Taper Bore 1 : 30 (Included)) with Slot Drive First Edition |
|
ISO 3466 |
Machine Taper Pin Reamers with Parallel Shanks First Edition |
|
ISO 3512 |
Heavy-Duty Cranked-Link Transmission Chains Second Edition |
|
ISO 3590 |
Modular units for machine tool construction - Spindle Units-First Edition |
|
ISO 368 |
Spinning Preparatory, Spinning and Doubling (Twisting) Machinery - Tubes for Ring-Spinning, Doubling and Twisting Spindles, Taper 1:38 and 1:64-Fourth Edition |
|
ISO 3835-2 |
Equipment for Vine Cultivation and Wine Making - Vocabulary - Part II First Edition |
|
ISO 3914-7 |
Textile Machinery and Accessories - Cylindrical Tubes - Part 7: Dimensions, Tolerances and Designation of Perforated Tubes for Cheese Dyeing First Edition; |
|
ISO 3970 |
Modular Units for Machine Tool Construction - Integral Way Columns - Floor-Mounted Type-First Edition; Amendment 1: 1982 |
|
ISO 4204 |
Countersinks, 90 Degrees, with Morse Taper Shanks and Detachable Pilots First Edition |
|
ISO 4247 |
Jig Bushes and Accessories for Drilling Purposes - Dimensions First Edition |
|
ISO 477 |
Textile Machinery and Accessories - Cone and Cheese Winding Machines - Vocabulary-First Edition |
|
ISO 4814 |
Household Sewing Machines - Determination of Stability of Needle Thread Tension First Edition |
|
ISO 5049-1 |
Mobile Equipment for Continuous Handling of Bulk Materials - Part 1: Rules for the Design of Steel Structures Second Edition |
|
ISO 5169 |
Machine Tools - Presentation of Lubrication Instructions First Edition |
|
ISO 5247-2 |
Textile Machinery and Accessories - Weaving Machines - Part 2: Accessories - Vocabulary First Edition |
|
ISO 5248 |
Textile Machinery and Accessories - Dyeing and Finishing Machinery - Vocabulary for Ancillary Devices-Second Edition |
|
ISO 529 |
Short Machine Taps and Hand Taps-Second Edition |
|
ISO 5293 |
Conveyor belts Determination of minimum transition distance on three idler rollers-Second Edition; Replaces ISO 10357: 11/1/89 |
|
ISO 5390 |
Compressors - Classification First Edition |
|
ISO 5468 |
Rotary and rotary impact masonry drill bits with hardmetal tips Dimensions-Third Edition |
|
ISO 572 |
Textile Machinery and Accessories - Shuttles for Pirn Changing Automatic Looms - Dimensions-First Edition; Erratum-1976 |
|
ISO 5745 |
Pliers and nippers Pliers for gripping and manipulating Dimensions and test values-Third Edition |
|
ISO 5748 |
Pliers and nippers End cutting nippers Dimensions and test values-Third Edition |
|
ISO 603-15 |
Bonded Abrasive Products - Dimensions - Part 15: Grinding Wheels for Cutting-Off on Stationary or Mobile Cutting-Off Machines-First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-14: 1999 and ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 |
|
ISO 6176 |
Textile Machinery - Warp Sizing Machines - Maximum Usable Width Second Edition |
|
ISO 6302 |
Earth-Moving Machinery - Drain, Fill and Level Plugs Third Edition |
|
ISO 6689-1 |
Equipment for Harvesting - Combines and Functional Components - Part 1: Vocabulary-First Edition |
|
ISO 6749 |
Earth-Moving Machinery - Preservation and Storage Second Edition |
|
ISO 6787 |
Assembly Tools for Screws and Nuts - Adjustable Wrenches-Second Edition |
|
ISO 6848 |
Arc welding and cutting Nonconsumable tungsten electrodes Classification-Second Edition |
|
ISO 7007 |
Woodworking Machines - Table Bandsawing Machines - Nomenclature and Acceptance Conditions First Edition |
|
ISO 710-I |
Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part I: General Rules of Representation-First Edition |
|
ISO 7113 |
Portable Hand-Held Forestry Machines - Cutting Attachments for Brush Cutters - Single-Piece Metal Blades-Third Edition |
|
ISO 7291 |
Gas Welding Equipment - Pressure Regulators for Manifold Systems Used in Welding, Cutting and Allied Processes up to 300 Bar-Second Edition |
|
ISO 7294 |
Saw Teeth for Woodworking Saws - Profile Shape - Terminology and Designation First Edition |
|
ISO 789-12 |
Agricultural Tractors - Test Procedures - Part 12: Low Temperature Starting-First Edition |
|
ISO 789-5 |
Agricultural Tractors - Test Procedures - Part 5: Partial Power PTO - Non-Mechanically Transmitted Power-First Edition |
|
ISO 7987 |
Woodworking Machines - Turning Lathes - Nomenclature and Acceptance Conditions First Edition |
|
ISO 8122 |
Textile Machinery - Knitting Machines - Number of Needles for Circular Knitting Machines of Large Nominal Diameter-Second Edition |
|
ISO 8224-1 |
Traveller irrigation machines Part 1: Operational characteristics and laboratory and field test methods-Second Edition; Corrected version: 02/15/2004 |
|
ISO 8573-8 |
Compressed air Part 8: Test methods for solid particle content by mass concentration-First Edition |
|
ISO 8662-14 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 14: Stone-Working Tools and Needle Scalers-First Edition |
|
ISO 8662-3 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 3: Rock Drills and Rotary Hammers-Amendment 1: 10/15/1999 |
|
ISO 8662-5 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 5: Pavement Breakers and Hammers for Construction Work-Amendment 1 10-15-1999 |
|
ISO 8866 |
Rotary Core Diamond Drilling Equipment - System C-First Edition; Corrigendum 1: 1991; Corrigendum 2: 1992 |
|
ISO 8909-1 |
Forage Harvesters - Part 1: Vocabulary First Edition |
|
ISO 8925 |
Earth-Moving Machinery - Diagnostic Ports-First Edition; Amendment 1-1997 |
|
ISO 9374-4 |
Cranes - Information to Be Provided - Part 4: Jib Cranes First Edition |
|
ISO 9374-5 |
Cranes - Information to Be Provided - Part 5: Overhead Travelling Cranes and Portal Bridge Cranes First Edition |
|
ISO 9398-3 |
Specifications for Industrial Laundry Machines - Definitions and Testing of Capacity and Consumption Characteristics - Part 3: Washing Tunnels-Second Edition |
|
ISO 9608 |
V-Belts - Uniformity of Belts - Test Method for Determination of Centre Distance Variation Second Edition |
|
ISO 9657 |
Pliers and nippers for electronics General technical requirements-Second Edition |
|
ISO 9856 |
Conveyor belts Determination of elastic and permanent elongation and calculation of elastic modulus-Second Edition |
|
ISO 9928-1 |
Cranes - Crane Driving Manual - Part 1: General First Edition |
|
ISO 9928-2 |
Cranes Crane driving manual Part 2: Mobile crane operators-First Edition |
|
ISO TR 27609 |
Vibration in hand-held tools Vibration measurement methods for grinders Evaluation of round-robin test-First Edition |
|
ISO TR 5046 |
Continuous Mechanical Handling Equipment - Safety Code for Conveyors and Elevators with Chain-Elements - Examples for Guarding of Nip Points First Edition |
|
ISO 10069 PT 1 |
Tools for Pressing - Elastomer Pressure Springs - Part 1: General Specification First Edition |
|
ISO 10071-1 |
Tools for Pressing - Ball-Lock Punches - Part 1: Ball-Lock Punches for Light Duty-First Edition |
|
ISO 10072 |
Tools for moulding Sprue bushes Dimensions-Second Edition |
|
ISO 10242-1 |
Tools for Pressing - Punch Holder Shanks - Part 1: Type A-Second Edition |
|
ISO 10247 |
Conveyor belts - Characteristics of covers - Classification-First Edition; Amendment 1: 01/15/2006 |
|
ISO 10264 |
Earth-Moving Machinery - Key-Locked Starting Systems First Edition |
|
ISO 10303-108 |
Industrial automation systems and integration Product data representation and exchange Part 108: Integrated application resource: Parameterization and constraints for explicit geometric product models-First Edition |
|
ISO 10303-204 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 204: Application Protocol: Mechanical Design Using Boundary Representation-First Edition |
|
ISO 10303-216 |
Industrial automation systems and integration Product data representation and exchange Part 216: Application protocol: Ship moulded forms-First Edition |
|
ISO 10303-24 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 24: Implementation Methods: C Language Binding of Standard Data Access Interface-First Edition |
|
ISO 10303-46 |
Industrial automation systems and integration Product data representation and exchange Part 46: Integrated generic resources: Visual presentation-First Edition; Corrigendum 1: 07/15/1999; Corrigendum 2: 5/15/2002; Corrigendum 3: 08/01/2006 |
|
ISO 10303-507 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 507: Application Interpreted Construct: Geometrically Bounded Surface-First Edition |
|
ISO 10303-515 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 515: Application Interpreted Construct: Constructive Solid Geometry-First Edition |
|
ISO 10303-55 CORR 1 |
Industrial automation systems and integration Product data representation and exchange Part 55: Integrated generic resource: Procedural and hybrid representation TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 10458 |
Textile Machinery - Square Bars for Winding Devices Relating to Dyeing and Finishing Machines - Dimensions First Edition |
|
ISO 10459 |
Textile Machinery - Dyeing and Finishing Machines - Designation of Operating Ranges of Component Parts First Edition |
|
ISO 10522 |
Agricultural Irrigation Equipment - Direct-Acting Pressure-Regulating Valves First Edition |
|
ISO 10627-1 |
Agricultural Sprayers - Data Sheet - Part 1: Typical Layout First Edition |
|
ISO 10889-7 |
Tool Holders with Cylindrical Shank - Part 7: Type F with Taper Seat-Second Edition |
|
ISO 11054 |
Cutting tools - Designation of high-speed steel groups-Second Edition |
|
ISO 11090-1 |
Machine Tools - Test Conditions for Die Sinking Electro-Discharge Machines (EDM) - Terminology and Testing of Accuracy - Part 1: Single Column Machines (Cross Slide Table Type and Fixed Table Type)-First Edition |
|
ISO 11111-5 |
Textile machinery Safety requirements Part 5: Preparatory machinery to weaving and knitting Matériel pour l industrie textile-First Edition; ISO 11111-5 together with ISO 11111-1 , -2, -3, -4, -6, and -7, cancels and replaces ISO 11111:1995 |
|
ISO 11111-6 |
Textile machinery Safety requirements Part 6: Fabric manufacturing machinery-First Edition; ISO 11111-6 together with ISO 11111-1 , -2, -3, -4, -5, and -7, cancels and replaces ISO 11111:1995 |
|
ISO 11520-1 |
Agricultural Grain Driers - Determination of Drying Performance - Part 1: General-First Edition |
|
ISO 11593 |
Manipulating Industrial Robots - Automatic End Effector Exchange Systems - Vocabulary and Presentation of Characteristics First Edition |
|
ISO 11677-2 |
Textile Machinery and Accessories - Main Dimensions of Flat Steel Healds with Open End Loops - Part 2: J-Shaped End Loops First Edition |
|
ISO 11738 |
Agricultural Irrigation Equipment - Control Heads-First Edition |
|
ISO 11787 |
Machinery for Agriculture and Forestry - Data Interchange Between Management Computer and Process Computers - Data Interchange Syntax First Edition |
|
ISO 11788-2 |
Electronic Data Interchange between Information Systems in Agriculture - Agricultural Data Element Dictionary - Part 2: Dairy Farming-First Edition |
|
ISO 11806 |
Agricultural and Forestry Machinery - Portable Hand-Held Combustion Engine Driven Brush Cutters and Grass Trimmers - Safety-First Edition |
|
ISO 11825 |
Textile Machinery and Accessories - Latch-Type Needles for Knitting Machines - Coordination of Shank Widths and Hook Heights First Edition |
|
ISO 11903 |
Tools for Pressing - Guide Pillar Mountings-First Edition |
|
ISO 12197 |
Woodruff Keyseat Cutters - Dimensions-First Edition |
|
ISO 12224-3 |
Solder wire, solid and flux cored Specifications and test methods Part 3: Wetting balance test method for flux cored solder wire efficacy-First Edition |
|
ISO 13441-2 |
Air-Assisted Agricultural Sprayers - Data Sheets - Part 2: Technical Specifications Related to Components-First Edition |
|
ISO 13457 |
Agricultural Irrigation Equipment - Water-Driven Chemical Injector Pumps-First Edition |
|
ISO 13584-101 |
Industrial automation systems and integration Parts library Part 101: Geometrical view exchange protocol by parametric Program-First Edition |
|
ISO 13862 |
Machinery for Forestry - Feller-Bunchers - Terms, Definitions and Commercial Specifications-First Edition |
|
ISO 13942 |
Bonded Abrasive Products - Limit Deviations and Run-Out Tolerances-First Edition |
|
ISO 13990-2 |
Textile Machinery and Accessories Yarn Feeders and Yarn Control for Knitting Machines Part 2: Connecting Dimensions for Yarn Feeders and Yarn Control Devices-First Edition; Cancels and Replaces ISO 13990: 1996 |
|
ISO 141 |
Textile Machinery and Accessories - Pirn Winders and Cross Winders - Definition of Left and Right Sides-First Edition |
|
ISO 14113 |
Gas welding equipment Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)-Second Edition |
|
ISO 14114 |
Gas Welding Equipment - Acetylene Manifold Systems for Welding, Cutting and Allied Processes - General Requirements-First Edition |
|
ISO 14131 |
Agricultural sprayers Boom steadiness Test methods-First Edition |
|
ISO 142 |
Textile Machinery and Accessories - Weaving Preparatory Machines - Definition of Left and Right Sides-First Edition |
|
ISO 14372 |
Welding Consumables - Determination of Moisture Resistance of Manual Metal Arc Welding Electrodes by Measurement of Diffusible Hydrogen-First Edition |
|
ISO 14710 |
Equipment for Crop Protection - Air-Assisted Sprayers - Dimensions of Nozzle Swivel Nuts-First Edition |
|
ISO 14744-1 |
Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 1: Principles and Acceptance Conditions-First Edition |
|
ISO 14744-4 |
Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 4: Measurement of Welding Speed-First Edition |
|
ISO 14744-5 |
Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 5: Measurement of Run-Out Accuracy-First Edition |
|
ISO 15236-1 |
Steel cord conveyor belts Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use-First Edition |
|
ISO 15236-2 |
Steel cord conveyor belts Part 2: Preferred belt types-First Edition |
|
ISO 15600 |
Tools for Moulding - Thermal Insulating Sheets for Injection Moulds-First Edition |
|
ISO 15618-1 |
Qualification Testing of Welders for Underwater Welding - Part 1: Diver-Welders for Hyperbaric Wet Welding-First Edition |
|
ISO 15637-1 |
Holding fixtures of cylindrical abrasive sleeves Part 1: Holding fixtures with shank for hand-held grinding machines-First Edition |
|
ISO 15886-3 |
Agricultural irrigation equipment Sprinklers Part 3: Characterization of distribution and test methods-First Edition; Supersedes ISO 7749-2 |
|
ISO 16057 |
Coated Abrasives - Vulcanized Fibre Discs-First Edition |
|
ISO 16100-2 |
Industrial automation systems and integration Manufacturing software capability profiling for interoperability Part 2: Profiling methodology-First Edition |
|
ISO 16462 |
Cubic boron nitride inserts, tipped or solid Dimensions, types-First Edition |
|
ISO 1684 |
Wire, Bar and Tube Drawing Dies - Specifications-First Edition; Amendment 2-1982 |
|
ISO 1717 |
Rock Drilling - Rotary Drill-Rods and Rotary Drill-Bits for Dry Drilling - Connecting Dimensions-First Edition |
|
ISO 17642-3 |
Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 3: Externally loaded tests-First Edition |
|
ISO 17657-1 |
Resistance welding Welding current measurement for resistance welding Part 1: Guidelines for measurement-First Edition |
|
ISO 17657-4 |
Resistance welding Welding current measurement for resistance welding Part 4: Calibration system-First Edition |
|
ISO 1816 |
Continuous Mechanical Handling Equipment for Loose Bulk Materials and Unit Loads - Belt Conveyors - Basic Characteristics of Motorized Driving Pulleys-First Edition |
|
ISO 18629-44 |
Industrial automation systems and integration Process specification language Part 44: Definitional extension: Resource extensions-First Edition |
|
ISO 1985 |
Machine Tools - Test Conditions for Surface Grinding Machines with Vertical Grinding Wheel Spindle and Reciprocating Table - Testing of the Accuracy-Third Edition |
|
ISO 1986-1 |
Test Conditions for Surface Grinding Machines with Horizontal Grinding Wheel Spindle and Reciprocating Table - Testing of Accuracy - Part 1: Machines with a Table Length of up to 1 600 mm-First Edition; Replaces ISO 1986 |
|
ISO 2012 |
Textile Machinery and Accessories - Cone Sectional Warping Machines - Maximum Usable Width-First Edition |
|
ISO 2057 |
Agricultural Tractors - Remote Control Hydraulic Cylinders for Trailed Implements-Second Edition |
|
ISO 21182 |
Light conveyor belts Determination of the coefficient of friction-First Edition |
|
ISO 2139 |
Continuous Mechanical Handling Equipment for Loose Bulk Materials - Oscillating Conveyors and Shaking or Reciprocating Feeders with Tubular Trough-First Edition |
|
ISO 21949 |
Coated Abrasives - Plain Sheets with Holes for Dust Extraction-First Edition |
|
ISO 21951 |
Coated Abrasives - Plain Discs with Holes for Dust Extraction-First Edition |
|
ISO 2250 |
Finishing Reamers for Morse and Metric Tapers, with Parallel Shanks and Morse Taper Shanks-First Edition |
|
ISO 22763 |
Equipment for crop protection Sprayers Demonstration track for field crop sprayers-First Edition |
|
ISO 2283 |
Long Shank Machine Taps with Nominal Diameters from M3 to M24 and 1/8 to 1 in - Reduced Shank Taps-Second Edition |
|
ISO 22866 |
Equipment for crop protection - Methods for field measurement of spray drift-First Edition |
|
ISO 22986 |
Cranes Stiffness Bridge and gantry cranes-First Edition |
|
ISO 2336-1 |
Hacksaw Blades - Part 1: Dimensions for Hand Blades-First Edition; Replaces ISO 2336 |
|
ISO 23953-2 |
Refrigerated display cabinets - Part 2: Classification, requirements and test conditions-First Edition; Together with ISO 23953-1 Replaces ISO 1992-1: 1974, ISO 1992-4:1974 thru ISO 1992-6:1974, ISO 5160-1:1979 and ISO 5160-2:1980 |
|
ISO 2402 |
Shell Reamers with Taper Bore (Taper Bore 1 : 30 (Included)) with Slot Drive and Arbors for Shell Reamers-First Edition |
|
ISO 2406 |
Continuous Mechanical Handling Equipment - Mobile and Portable Conveyors - Constructional Specifications-First Edition |
|
ISO 2421 |
Coated Abrasives - Cylindrical Sleeves-Second Edition |
|
ISO 2572 |
Textile Machinery and Accessories - Card Gauges-Second Edition |
|
ISO 2769 |
Modular Units for Machine Tool Construction - Wing Bases for Slide Units First Edition; (NZS 5217: 1974) |
|
ISO 2773-1 |
Test Conditions for Pillar Type Vertical Drilling Machines - Testing of the Accuracy - Part I: Geometrical Test First Edition |
|
ISO 2935 |
Circular Saw Blades for Woodworking - Dimensions First Edition |
|
ISO 298 |
Machine Tools - Lathe Centres - Sizes for Interchangeability-First Edition |